xref: /openbmc/linux/drivers/net/ipa/ipa_uc.c (revision a2cab953)
1 // SPDX-License-Identifier: GPL-2.0
2 
3 /* Copyright (c) 2012-2018, The Linux Foundation. All rights reserved.
4  * Copyright (C) 2018-2022 Linaro Ltd.
5  */
6 
7 #include <linux/types.h>
8 #include <linux/io.h>
9 #include <linux/delay.h>
10 #include <linux/pm_runtime.h>
11 
12 #include "ipa.h"
13 #include "ipa_uc.h"
14 #include "ipa_power.h"
15 
16 /**
17  * DOC:  The IPA embedded microcontroller
18  *
19  * The IPA incorporates a microcontroller that is able to do some additional
20  * handling/offloading of network activity.  The current code makes
21  * essentially no use of the microcontroller, but it still requires some
22  * initialization.  It needs to be notified in the event the AP crashes.
23  *
24  * The microcontroller can generate two interrupts to the AP.  One interrupt
25  * is used to indicate that a response to a request from the AP is available.
26  * The other is used to notify the AP of the occurrence of an event.  In
27  * addition, the AP can interrupt the microcontroller by writing a register.
28  *
29  * A 128 byte block of structured memory within the IPA SRAM is used together
30  * with these interrupts to implement the communication interface between the
31  * AP and the IPA microcontroller.  Each side writes data to the shared area
32  * before interrupting its peer, which will read the written data in response
33  * to the interrupt.  Some information found in the shared area is currently
34  * unused.  All remaining space in the shared area is reserved, and must not
35  * be read or written by the AP.
36  */
37 /* Supports hardware interface version 0x2000 */
38 
39 /* Delay to allow a the microcontroller to save state when crashing */
40 #define IPA_SEND_DELAY		100	/* microseconds */
41 
42 /**
43  * struct ipa_uc_mem_area - AP/microcontroller shared memory area
44  * @command:		command code (AP->microcontroller)
45  * @reserved0:		reserved bytes; avoid reading or writing
46  * @command_param:	low 32 bits of command parameter (AP->microcontroller)
47  * @command_param_hi:	high 32 bits of command parameter (AP->microcontroller)
48  *
49  * @response:		response code (microcontroller->AP)
50  * @reserved1:		reserved bytes; avoid reading or writing
51  * @response_param:	response parameter (microcontroller->AP)
52  *
53  * @event:		event code (microcontroller->AP)
54  * @reserved2:		reserved bytes; avoid reading or writing
55  * @event_param:	event parameter (microcontroller->AP)
56  *
57  * @first_error_address: address of first error-source on SNOC
58  * @hw_state:		state of hardware (including error type information)
59  * @warning_counter:	counter of non-fatal hardware errors
60  * @reserved3:		reserved bytes; avoid reading or writing
61  * @interface_version:	hardware-reported interface version
62  * @reserved4:		reserved bytes; avoid reading or writing
63  *
64  * A shared memory area at the base of IPA resident memory is used for
65  * communication with the microcontroller.  The region is 128 bytes in
66  * size, but only the first 40 bytes (structured this way) are used.
67  */
68 struct ipa_uc_mem_area {
69 	u8 command;		/* enum ipa_uc_command */
70 	u8 reserved0[3];
71 	__le32 command_param;
72 	__le32 command_param_hi;
73 	u8 response;		/* enum ipa_uc_response */
74 	u8 reserved1[3];
75 	__le32 response_param;
76 	u8 event;		/* enum ipa_uc_event */
77 	u8 reserved2[3];
78 
79 	__le32 event_param;
80 	__le32 first_error_address;
81 	u8 hw_state;
82 	u8 warning_counter;
83 	__le16 reserved3;
84 	__le16 interface_version;
85 	__le16 reserved4;
86 };
87 
88 /** enum ipa_uc_command - commands from the AP to the microcontroller */
89 enum ipa_uc_command {
90 	IPA_UC_COMMAND_NO_OP		= 0x0,
91 	IPA_UC_COMMAND_UPDATE_FLAGS	= 0x1,
92 	IPA_UC_COMMAND_DEBUG_RUN_TEST	= 0x2,
93 	IPA_UC_COMMAND_DEBUG_GET_INFO	= 0x3,
94 	IPA_UC_COMMAND_ERR_FATAL	= 0x4,
95 	IPA_UC_COMMAND_CLK_GATE		= 0x5,
96 	IPA_UC_COMMAND_CLK_UNGATE	= 0x6,
97 	IPA_UC_COMMAND_MEMCPY		= 0x7,
98 	IPA_UC_COMMAND_RESET_PIPE	= 0x8,
99 	IPA_UC_COMMAND_REG_WRITE	= 0x9,
100 	IPA_UC_COMMAND_GSI_CH_EMPTY	= 0xa,
101 };
102 
103 /** enum ipa_uc_response - microcontroller response codes */
104 enum ipa_uc_response {
105 	IPA_UC_RESPONSE_NO_OP		= 0x0,
106 	IPA_UC_RESPONSE_INIT_COMPLETED	= 0x1,
107 	IPA_UC_RESPONSE_CMD_COMPLETED	= 0x2,
108 	IPA_UC_RESPONSE_DEBUG_GET_INFO	= 0x3,
109 };
110 
111 /** enum ipa_uc_event - common cpu events reported by the microcontroller */
112 enum ipa_uc_event {
113 	IPA_UC_EVENT_NO_OP		= 0x0,
114 	IPA_UC_EVENT_ERROR		= 0x1,
115 	IPA_UC_EVENT_LOG_INFO		= 0x2,
116 };
117 
118 static struct ipa_uc_mem_area *ipa_uc_shared(struct ipa *ipa)
119 {
120 	const struct ipa_mem *mem = ipa_mem_find(ipa, IPA_MEM_UC_SHARED);
121 	u32 offset = ipa->mem_offset + mem->offset;
122 
123 	return ipa->mem_virt + offset;
124 }
125 
126 /* Microcontroller event IPA interrupt handler */
127 static void ipa_uc_event_handler(struct ipa *ipa, enum ipa_irq_id irq_id)
128 {
129 	struct ipa_uc_mem_area *shared = ipa_uc_shared(ipa);
130 	struct device *dev = &ipa->pdev->dev;
131 
132 	if (shared->event == IPA_UC_EVENT_ERROR)
133 		dev_err(dev, "microcontroller error event\n");
134 	else if (shared->event != IPA_UC_EVENT_LOG_INFO)
135 		dev_err(dev, "unsupported microcontroller event %u\n",
136 			shared->event);
137 	/* The LOG_INFO event can be safely ignored */
138 }
139 
140 /* Microcontroller response IPA interrupt handler */
141 static void ipa_uc_response_hdlr(struct ipa *ipa, enum ipa_irq_id irq_id)
142 {
143 	struct ipa_uc_mem_area *shared = ipa_uc_shared(ipa);
144 	struct device *dev = &ipa->pdev->dev;
145 
146 	/* An INIT_COMPLETED response message is sent to the AP by the
147 	 * microcontroller when it is operational.  Other than this, the AP
148 	 * should only receive responses from the microcontroller when it has
149 	 * sent it a request message.
150 	 *
151 	 * We can drop the power reference taken in ipa_uc_power() once we
152 	 * know the microcontroller has finished its initialization.
153 	 */
154 	switch (shared->response) {
155 	case IPA_UC_RESPONSE_INIT_COMPLETED:
156 		if (ipa->uc_powered) {
157 			ipa->uc_loaded = true;
158 			ipa_power_retention(ipa, true);
159 			pm_runtime_mark_last_busy(dev);
160 			(void)pm_runtime_put_autosuspend(dev);
161 			ipa->uc_powered = false;
162 		} else {
163 			dev_warn(dev, "unexpected init_completed response\n");
164 		}
165 		break;
166 	default:
167 		dev_warn(dev, "unsupported microcontroller response %u\n",
168 			 shared->response);
169 		break;
170 	}
171 }
172 
173 /* Configure the IPA microcontroller subsystem */
174 void ipa_uc_config(struct ipa *ipa)
175 {
176 	ipa->uc_powered = false;
177 	ipa->uc_loaded = false;
178 	ipa_interrupt_add(ipa->interrupt, IPA_IRQ_UC_0, ipa_uc_event_handler);
179 	ipa_interrupt_add(ipa->interrupt, IPA_IRQ_UC_1, ipa_uc_response_hdlr);
180 }
181 
182 /* Inverse of ipa_uc_config() */
183 void ipa_uc_deconfig(struct ipa *ipa)
184 {
185 	struct device *dev = &ipa->pdev->dev;
186 
187 	ipa_interrupt_remove(ipa->interrupt, IPA_IRQ_UC_1);
188 	ipa_interrupt_remove(ipa->interrupt, IPA_IRQ_UC_0);
189 	if (ipa->uc_loaded)
190 		ipa_power_retention(ipa, false);
191 
192 	if (!ipa->uc_powered)
193 		return;
194 
195 	pm_runtime_mark_last_busy(dev);
196 	(void)pm_runtime_put_autosuspend(dev);
197 }
198 
199 /* Take a proxy power reference for the microcontroller */
200 void ipa_uc_power(struct ipa *ipa)
201 {
202 	static bool already;
203 	struct device *dev;
204 	int ret;
205 
206 	if (already)
207 		return;
208 	already = true;		/* Only do this on first boot */
209 
210 	/* This power reference dropped in ipa_uc_response_hdlr() above */
211 	dev = &ipa->pdev->dev;
212 	ret = pm_runtime_get_sync(dev);
213 	if (ret < 0) {
214 		pm_runtime_put_noidle(dev);
215 		dev_err(dev, "error %d getting proxy power\n", ret);
216 	} else {
217 		ipa->uc_powered = true;
218 	}
219 }
220 
221 /* Send a command to the microcontroller */
222 static void send_uc_command(struct ipa *ipa, u32 command, u32 command_param)
223 {
224 	struct ipa_uc_mem_area *shared = ipa_uc_shared(ipa);
225 	const struct ipa_reg *reg;
226 	u32 val;
227 
228 	/* Fill in the command data */
229 	shared->command = command;
230 	shared->command_param = cpu_to_le32(command_param);
231 	shared->command_param_hi = 0;
232 	shared->response = 0;
233 	shared->response_param = 0;
234 
235 	/* Use an interrupt to tell the microcontroller the command is ready */
236 	reg = ipa_reg(ipa, IPA_IRQ_UC);
237 	val = ipa_reg_bit(reg, UC_INTR);
238 
239 	iowrite32(val, ipa->reg_virt + ipa_reg_offset(reg));
240 }
241 
242 /* Tell the microcontroller the AP is shutting down */
243 void ipa_uc_panic_notifier(struct ipa *ipa)
244 {
245 	if (!ipa->uc_loaded)
246 		return;
247 
248 	send_uc_command(ipa, IPA_UC_COMMAND_ERR_FATAL, 0);
249 
250 	/* give uc enough time to save state */
251 	udelay(IPA_SEND_DELAY);
252 }
253