1 /* SPDX-License-Identifier: GPL-2.0 */ 2 3 /* Copyright (c) 2012-2018, The Linux Foundation. All rights reserved. 4 * Copyright (C) 2018-2022 Linaro Ltd. 5 */ 6 #ifndef _IPA_H_ 7 #define _IPA_H_ 8 9 #include <linux/types.h> 10 #include <linux/device.h> 11 #include <linux/notifier.h> 12 #include <linux/pm_wakeup.h> 13 14 #include "ipa_version.h" 15 #include "gsi.h" 16 #include "ipa_mem.h" 17 #include "ipa_qmi.h" 18 #include "ipa_endpoint.h" 19 #include "ipa_interrupt.h" 20 21 struct clk; 22 struct icc_path; 23 struct net_device; 24 struct platform_device; 25 26 struct ipa_power; 27 struct ipa_smp2p; 28 struct ipa_interrupt; 29 30 /** 31 * struct ipa - IPA information 32 * @gsi: Embedded GSI structure 33 * @version: IPA hardware version 34 * @pdev: Platform device 35 * @completion: Used to signal pipeline clear transfer complete 36 * @nb: Notifier block used for remoteproc SSR 37 * @notifier: Remoteproc SSR notifier 38 * @smp2p: SMP2P information 39 * @power: IPA power information 40 * @table_addr: DMA address of filter/route table content 41 * @table_virt: Virtual address of filter/route table content 42 * @route_count: Total number of entries in a routing table 43 * @modem_route_count: Number of modem entries in a routing table 44 * @filter_count: Maximum number of entries in a filter table 45 * @interrupt: IPA Interrupt information 46 * @uc_powered: true if power is active by proxy for microcontroller 47 * @uc_loaded: true after microcontroller has reported it's ready 48 * @reg_virt: Virtual address used for IPA register access 49 * @regs: IPA register definitions 50 * @mem_addr: DMA address of IPA-local memory space 51 * @mem_virt: Virtual address of IPA-local memory space 52 * @mem_offset: Offset from @mem_virt used for access to IPA memory 53 * @mem_size: Total size (bytes) of memory at @mem_virt 54 * @mem_count: Number of entries in the mem array 55 * @mem: Array of IPA-local memory region descriptors 56 * @imem_iova: I/O virtual address of IPA region in IMEM 57 * @imem_size: Size of IMEM region 58 * @smem_iova: I/O virtual address of IPA region in SMEM 59 * @smem_size: Size of SMEM region 60 * @zero_addr: DMA address of preallocated zero-filled memory 61 * @zero_virt: Virtual address of preallocated zero-filled memory 62 * @zero_size: Size (bytes) of preallocated zero-filled memory 63 * @endpoint_count: Number of defined bits in most bitmaps below 64 * @available_count: Number of defined bits in the available bitmap 65 * @defined: Bitmap of endpoints defined in config data 66 * @available: Bitmap of endpoints supported by hardware 67 * @filtered: Bitmap of endpoints that support filtering 68 * @set_up: Bitmap of endpoints that are set up for use 69 * @enabled: Bitmap of currently enabled endpoints 70 * @modem_tx_count: Number of defined modem TX endoints 71 * @endpoint: Array of endpoint information 72 * @channel_map: Mapping of GSI channel to IPA endpoint 73 * @name_map: Mapping of IPA endpoint name to IPA endpoint 74 * @setup_complete: Flag indicating whether setup stage has completed 75 * @modem_state: State of modem (stopped, running) 76 * @modem_netdev: Network device structure used for modem 77 * @qmi: QMI information 78 */ 79 struct ipa { 80 struct gsi gsi; 81 enum ipa_version version; 82 struct platform_device *pdev; 83 struct completion completion; 84 struct notifier_block nb; 85 void *notifier; 86 struct ipa_smp2p *smp2p; 87 struct ipa_power *power; 88 89 dma_addr_t table_addr; 90 __le64 *table_virt; 91 u32 route_count; 92 u32 modem_route_count; 93 u32 filter_count; 94 95 struct ipa_interrupt *interrupt; 96 bool uc_powered; 97 bool uc_loaded; 98 99 void __iomem *reg_virt; 100 const struct regs *regs; 101 102 dma_addr_t mem_addr; 103 void *mem_virt; 104 u32 mem_offset; 105 u32 mem_size; 106 u32 mem_count; 107 const struct ipa_mem *mem; 108 109 unsigned long imem_iova; 110 size_t imem_size; 111 112 unsigned long smem_iova; 113 size_t smem_size; 114 115 dma_addr_t zero_addr; 116 void *zero_virt; 117 size_t zero_size; 118 119 /* Bitmaps indicating endpoint state */ 120 u32 endpoint_count; 121 u32 available_count; 122 unsigned long *defined; /* Defined in configuration data */ 123 unsigned long *available; /* Supported by hardware */ 124 u64 filtered; /* Support filtering (AP and modem) */ 125 unsigned long *set_up; 126 unsigned long *enabled; 127 128 u32 modem_tx_count; 129 struct ipa_endpoint endpoint[IPA_ENDPOINT_MAX]; 130 struct ipa_endpoint *channel_map[GSI_CHANNEL_COUNT_MAX]; 131 struct ipa_endpoint *name_map[IPA_ENDPOINT_COUNT]; 132 133 bool setup_complete; 134 135 atomic_t modem_state; /* enum ipa_modem_state */ 136 struct net_device *modem_netdev; 137 struct ipa_qmi qmi; 138 }; 139 140 /** 141 * ipa_setup() - Perform IPA setup 142 * @ipa: IPA pointer 143 * 144 * IPA initialization is broken into stages: init; config; and setup. 145 * (These have inverses exit, deconfig, and teardown.) 146 * 147 * Activities performed at the init stage can be done without requiring 148 * any access to IPA hardware. Activities performed at the config stage 149 * require IPA power, because they involve access to IPA registers. 150 * The setup stage is performed only after the GSI hardware is ready 151 * (more on this below). The setup stage allows the AP to perform 152 * more complex initialization by issuing "immediate commands" using 153 * a special interface to the IPA. 154 * 155 * This function, @ipa_setup(), starts the setup stage. 156 * 157 * In order for the GSI hardware to be functional it needs firmware to be 158 * loaded (in addition to some other low-level initialization). This early 159 * GSI initialization can be done either by Trust Zone on the AP or by the 160 * modem. 161 * 162 * If it's done by Trust Zone, the AP loads the GSI firmware and supplies 163 * it to Trust Zone to verify and install. When this completes, if 164 * verification was successful, the GSI layer is ready and ipa_setup() 165 * implements the setup phase of initialization. 166 * 167 * If the modem performs early GSI initialization, the AP needs to know 168 * when this has occurred. An SMP2P interrupt is used for this purpose, 169 * and receipt of that interrupt triggers the call to ipa_setup(). 170 */ 171 int ipa_setup(struct ipa *ipa); 172 173 #endif /* _IPA_H_ */ 174