1 /* SPDX-License-Identifier: GPL-2.0 */ 2 3 /* Copyright (c) 2012-2018, The Linux Foundation. All rights reserved. 4 * Copyright (C) 2018-2020 Linaro Ltd. 5 */ 6 #ifndef _IPA_H_ 7 #define _IPA_H_ 8 9 #include <linux/types.h> 10 #include <linux/device.h> 11 #include <linux/notifier.h> 12 #include <linux/pm_wakeup.h> 13 14 #include "ipa_version.h" 15 #include "gsi.h" 16 #include "ipa_mem.h" 17 #include "ipa_qmi.h" 18 #include "ipa_endpoint.h" 19 #include "ipa_interrupt.h" 20 21 struct clk; 22 struct icc_path; 23 struct net_device; 24 struct platform_device; 25 26 struct ipa_clock; 27 struct ipa_smp2p; 28 struct ipa_interrupt; 29 30 /** 31 * enum ipa_flag - IPA state flags 32 * @IPA_FLAG_RESUMED: Whether resume from suspend has been signaled 33 * @IPA_FLAG_COUNT: Number of defined IPA flags 34 */ 35 enum ipa_flag { 36 IPA_FLAG_RESUMED, 37 IPA_FLAG_COUNT, /* Last; not a flag */ 38 }; 39 40 /** 41 * struct ipa - IPA information 42 * @gsi: Embedded GSI structure 43 * @flags: Boolean state flags 44 * @version: IPA hardware version 45 * @pdev: Platform device 46 * @modem_rproc: Remoteproc handle for modem subsystem 47 * @smp2p: SMP2P information 48 * @clock: IPA clocking information 49 * @table_addr: DMA address of filter/route table content 50 * @table_virt: Virtual address of filter/route table content 51 * @interrupt: IPA Interrupt information 52 * @uc_loaded: true after microcontroller has reported it's ready 53 * @reg_addr: DMA address used for IPA register access 54 * @reg_virt: Virtual address used for IPA register access 55 * @mem_addr: DMA address of IPA-local memory space 56 * @mem_virt: Virtual address of IPA-local memory space 57 * @mem_offset: Offset from @mem_virt used for access to IPA memory 58 * @mem_size: Total size (bytes) of memory at @mem_virt 59 * @mem: Array of IPA-local memory region descriptors 60 * @imem_iova: I/O virtual address of IPA region in IMEM 61 * @imem_size; Size of IMEM region 62 * @smem_iova: I/O virtual address of IPA region in SMEM 63 * @smem_size; Size of SMEM region 64 * @zero_addr: DMA address of preallocated zero-filled memory 65 * @zero_virt: Virtual address of preallocated zero-filled memory 66 * @zero_size: Size (bytes) of preallocated zero-filled memory 67 * @wakeup_source: Wakeup source information 68 * @available: Bit mask indicating endpoints hardware supports 69 * @filter_map: Bit mask indicating endpoints that support filtering 70 * @initialized: Bit mask indicating endpoints initialized 71 * @set_up: Bit mask indicating endpoints set up 72 * @enabled: Bit mask indicating endpoints enabled 73 * @endpoint: Array of endpoint information 74 * @channel_map: Mapping of GSI channel to IPA endpoint 75 * @name_map: Mapping of IPA endpoint name to IPA endpoint 76 * @setup_complete: Flag indicating whether setup stage has completed 77 * @modem_state: State of modem (stopped, running) 78 * @modem_netdev: Network device structure used for modem 79 * @qmi: QMI information 80 */ 81 struct ipa { 82 struct gsi gsi; 83 DECLARE_BITMAP(flags, IPA_FLAG_COUNT); 84 enum ipa_version version; 85 struct platform_device *pdev; 86 struct rproc *modem_rproc; 87 struct notifier_block nb; 88 void *notifier; 89 struct ipa_smp2p *smp2p; 90 struct ipa_clock *clock; 91 92 dma_addr_t table_addr; 93 __le64 *table_virt; 94 95 struct ipa_interrupt *interrupt; 96 bool uc_loaded; 97 98 dma_addr_t reg_addr; 99 void __iomem *reg_virt; 100 101 dma_addr_t mem_addr; 102 void *mem_virt; 103 u32 mem_offset; 104 u32 mem_size; 105 const struct ipa_mem *mem; 106 107 unsigned long imem_iova; 108 size_t imem_size; 109 110 unsigned long smem_iova; 111 size_t smem_size; 112 113 dma_addr_t zero_addr; 114 void *zero_virt; 115 size_t zero_size; 116 117 /* Bit masks indicating endpoint state */ 118 u32 available; /* supported by hardware */ 119 u32 filter_map; 120 u32 initialized; 121 u32 set_up; 122 u32 enabled; 123 124 struct ipa_endpoint endpoint[IPA_ENDPOINT_MAX]; 125 struct ipa_endpoint *channel_map[GSI_CHANNEL_COUNT_MAX]; 126 struct ipa_endpoint *name_map[IPA_ENDPOINT_COUNT]; 127 128 bool setup_complete; 129 130 atomic_t modem_state; /* enum ipa_modem_state */ 131 struct net_device *modem_netdev; 132 struct ipa_qmi qmi; 133 }; 134 135 /** 136 * ipa_setup() - Perform IPA setup 137 * @ipa: IPA pointer 138 * 139 * IPA initialization is broken into stages: init; config; and setup. 140 * (These have inverses exit, deconfig, and teardown.) 141 * 142 * Activities performed at the init stage can be done without requiring 143 * any access to IPA hardware. Activities performed at the config stage 144 * require the IPA clock to be running, because they involve access 145 * to IPA registers. The setup stage is performed only after the GSI 146 * hardware is ready (more on this below). The setup stage allows 147 * the AP to perform more complex initialization by issuing "immediate 148 * commands" using a special interface to the IPA. 149 * 150 * This function, @ipa_setup(), starts the setup stage. 151 * 152 * In order for the GSI hardware to be functional it needs firmware to be 153 * loaded (in addition to some other low-level initialization). This early 154 * GSI initialization can be done either by Trust Zone on the AP or by the 155 * modem. 156 * 157 * If it's done by Trust Zone, the AP loads the GSI firmware and supplies 158 * it to Trust Zone to verify and install. When this completes, if 159 * verification was successful, the GSI layer is ready and ipa_setup() 160 * implements the setup phase of initialization. 161 * 162 * If the modem performs early GSI initialization, the AP needs to know 163 * when this has occurred. An SMP2P interrupt is used for this purpose, 164 * and receipt of that interrupt triggers the call to ipa_setup(). 165 */ 166 int ipa_setup(struct ipa *ipa); 167 168 #endif /* _IPA_H_ */ 169