1 /* 2 * Driver for Microchip MRF24J40 802.15.4 Wireless-PAN Networking controller 3 * 4 * Copyright (C) 2012 Alan Ott <alan@signal11.us> 5 * Signal 11 Software 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License as published by 9 * the Free Software Foundation; either version 2 of the License, or 10 * (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 */ 17 18 #include <linux/spi/spi.h> 19 #include <linux/interrupt.h> 20 #include <linux/module.h> 21 #include <linux/of.h> 22 #include <linux/regmap.h> 23 #include <linux/ieee802154.h> 24 #include <linux/irq.h> 25 #include <net/cfg802154.h> 26 #include <net/mac802154.h> 27 28 /* MRF24J40 Short Address Registers */ 29 #define REG_RXMCR 0x00 /* Receive MAC control */ 30 #define BIT_PROMI BIT(0) 31 #define BIT_ERRPKT BIT(1) 32 #define BIT_NOACKRSP BIT(5) 33 #define BIT_PANCOORD BIT(3) 34 35 #define REG_PANIDL 0x01 /* PAN ID (low) */ 36 #define REG_PANIDH 0x02 /* PAN ID (high) */ 37 #define REG_SADRL 0x03 /* Short address (low) */ 38 #define REG_SADRH 0x04 /* Short address (high) */ 39 #define REG_EADR0 0x05 /* Long address (low) (high is EADR7) */ 40 #define REG_EADR1 0x06 41 #define REG_EADR2 0x07 42 #define REG_EADR3 0x08 43 #define REG_EADR4 0x09 44 #define REG_EADR5 0x0A 45 #define REG_EADR6 0x0B 46 #define REG_EADR7 0x0C 47 #define REG_RXFLUSH 0x0D 48 #define REG_ORDER 0x10 49 #define REG_TXMCR 0x11 /* Transmit MAC control */ 50 #define TXMCR_MIN_BE_SHIFT 3 51 #define TXMCR_MIN_BE_MASK 0x18 52 #define TXMCR_CSMA_RETRIES_SHIFT 0 53 #define TXMCR_CSMA_RETRIES_MASK 0x07 54 55 #define REG_ACKTMOUT 0x12 56 #define REG_ESLOTG1 0x13 57 #define REG_SYMTICKL 0x14 58 #define REG_SYMTICKH 0x15 59 #define REG_PACON0 0x16 /* Power Amplifier Control */ 60 #define REG_PACON1 0x17 /* Power Amplifier Control */ 61 #define REG_PACON2 0x18 /* Power Amplifier Control */ 62 #define REG_TXBCON0 0x1A 63 #define REG_TXNCON 0x1B /* Transmit Normal FIFO Control */ 64 #define BIT_TXNTRIG BIT(0) 65 #define BIT_TXNSECEN BIT(1) 66 #define BIT_TXNACKREQ BIT(2) 67 68 #define REG_TXG1CON 0x1C 69 #define REG_TXG2CON 0x1D 70 #define REG_ESLOTG23 0x1E 71 #define REG_ESLOTG45 0x1F 72 #define REG_ESLOTG67 0x20 73 #define REG_TXPEND 0x21 74 #define REG_WAKECON 0x22 75 #define REG_FROMOFFSET 0x23 76 #define REG_TXSTAT 0x24 /* TX MAC Status Register */ 77 #define REG_TXBCON1 0x25 78 #define REG_GATECLK 0x26 79 #define REG_TXTIME 0x27 80 #define REG_HSYMTMRL 0x28 81 #define REG_HSYMTMRH 0x29 82 #define REG_SOFTRST 0x2A /* Soft Reset */ 83 #define REG_SECCON0 0x2C 84 #define REG_SECCON1 0x2D 85 #define REG_TXSTBL 0x2E /* TX Stabilization */ 86 #define REG_RXSR 0x30 87 #define REG_INTSTAT 0x31 /* Interrupt Status */ 88 #define BIT_TXNIF BIT(0) 89 #define BIT_RXIF BIT(3) 90 #define BIT_SECIF BIT(4) 91 #define BIT_SECIGNORE BIT(7) 92 93 #define REG_INTCON 0x32 /* Interrupt Control */ 94 #define BIT_TXNIE BIT(0) 95 #define BIT_RXIE BIT(3) 96 #define BIT_SECIE BIT(4) 97 98 #define REG_GPIO 0x33 /* GPIO */ 99 #define REG_TRISGPIO 0x34 /* GPIO direction */ 100 #define REG_SLPACK 0x35 101 #define REG_RFCTL 0x36 /* RF Control Mode Register */ 102 #define BIT_RFRST BIT(2) 103 104 #define REG_SECCR2 0x37 105 #define REG_BBREG0 0x38 106 #define REG_BBREG1 0x39 /* Baseband Registers */ 107 #define BIT_RXDECINV BIT(2) 108 109 #define REG_BBREG2 0x3A /* */ 110 #define BBREG2_CCA_MODE_SHIFT 6 111 #define BBREG2_CCA_MODE_MASK 0xc0 112 113 #define REG_BBREG3 0x3B 114 #define REG_BBREG4 0x3C 115 #define REG_BBREG6 0x3E /* */ 116 #define REG_CCAEDTH 0x3F /* Energy Detection Threshold */ 117 118 /* MRF24J40 Long Address Registers */ 119 #define REG_RFCON0 0x200 /* RF Control Registers */ 120 #define RFCON0_CH_SHIFT 4 121 #define RFCON0_CH_MASK 0xf0 122 #define RFOPT_RECOMMEND 3 123 124 #define REG_RFCON1 0x201 125 #define REG_RFCON2 0x202 126 #define REG_RFCON3 0x203 127 128 #define TXPWRL_MASK 0xc0 129 #define TXPWRL_SHIFT 6 130 #define TXPWRL_30 0x3 131 #define TXPWRL_20 0x2 132 #define TXPWRL_10 0x1 133 #define TXPWRL_0 0x0 134 135 #define TXPWRS_MASK 0x38 136 #define TXPWRS_SHIFT 3 137 #define TXPWRS_6_3 0x7 138 #define TXPWRS_4_9 0x6 139 #define TXPWRS_3_7 0x5 140 #define TXPWRS_2_8 0x4 141 #define TXPWRS_1_9 0x3 142 #define TXPWRS_1_2 0x2 143 #define TXPWRS_0_5 0x1 144 #define TXPWRS_0 0x0 145 146 #define REG_RFCON5 0x205 147 #define REG_RFCON6 0x206 148 #define REG_RFCON7 0x207 149 #define REG_RFCON8 0x208 150 #define REG_SLPCAL0 0x209 151 #define REG_SLPCAL1 0x20A 152 #define REG_SLPCAL2 0x20B 153 #define REG_RFSTATE 0x20F 154 #define REG_RSSI 0x210 155 #define REG_SLPCON0 0x211 /* Sleep Clock Control Registers */ 156 #define BIT_INTEDGE BIT(1) 157 158 #define REG_SLPCON1 0x220 159 #define REG_WAKETIMEL 0x222 /* Wake-up Time Match Value Low */ 160 #define REG_WAKETIMEH 0x223 /* Wake-up Time Match Value High */ 161 #define REG_REMCNTL 0x224 162 #define REG_REMCNTH 0x225 163 #define REG_MAINCNT0 0x226 164 #define REG_MAINCNT1 0x227 165 #define REG_MAINCNT2 0x228 166 #define REG_MAINCNT3 0x229 167 #define REG_TESTMODE 0x22F /* Test mode */ 168 #define REG_ASSOEAR0 0x230 169 #define REG_ASSOEAR1 0x231 170 #define REG_ASSOEAR2 0x232 171 #define REG_ASSOEAR3 0x233 172 #define REG_ASSOEAR4 0x234 173 #define REG_ASSOEAR5 0x235 174 #define REG_ASSOEAR6 0x236 175 #define REG_ASSOEAR7 0x237 176 #define REG_ASSOSAR0 0x238 177 #define REG_ASSOSAR1 0x239 178 #define REG_UNONCE0 0x240 179 #define REG_UNONCE1 0x241 180 #define REG_UNONCE2 0x242 181 #define REG_UNONCE3 0x243 182 #define REG_UNONCE4 0x244 183 #define REG_UNONCE5 0x245 184 #define REG_UNONCE6 0x246 185 #define REG_UNONCE7 0x247 186 #define REG_UNONCE8 0x248 187 #define REG_UNONCE9 0x249 188 #define REG_UNONCE10 0x24A 189 #define REG_UNONCE11 0x24B 190 #define REG_UNONCE12 0x24C 191 #define REG_RX_FIFO 0x300 /* Receive FIFO */ 192 193 /* Device configuration: Only channels 11-26 on page 0 are supported. */ 194 #define MRF24J40_CHAN_MIN 11 195 #define MRF24J40_CHAN_MAX 26 196 #define CHANNEL_MASK (((u32)1 << (MRF24J40_CHAN_MAX + 1)) \ 197 - ((u32)1 << MRF24J40_CHAN_MIN)) 198 199 #define TX_FIFO_SIZE 128 /* From datasheet */ 200 #define RX_FIFO_SIZE 144 /* From datasheet */ 201 #define SET_CHANNEL_DELAY_US 192 /* From datasheet */ 202 203 enum mrf24j40_modules { MRF24J40, MRF24J40MA, MRF24J40MC }; 204 205 /* Device Private Data */ 206 struct mrf24j40 { 207 struct spi_device *spi; 208 struct ieee802154_hw *hw; 209 210 struct regmap *regmap_short; 211 struct regmap *regmap_long; 212 213 /* for writing txfifo */ 214 struct spi_message tx_msg; 215 u8 tx_hdr_buf[2]; 216 struct spi_transfer tx_hdr_trx; 217 u8 tx_len_buf[2]; 218 struct spi_transfer tx_len_trx; 219 struct spi_transfer tx_buf_trx; 220 struct sk_buff *tx_skb; 221 222 /* post transmit message to send frame out */ 223 struct spi_message tx_post_msg; 224 u8 tx_post_buf[2]; 225 struct spi_transfer tx_post_trx; 226 227 /* for protect/unprotect/read length rxfifo */ 228 struct spi_message rx_msg; 229 u8 rx_buf[3]; 230 struct spi_transfer rx_trx; 231 232 /* receive handling */ 233 struct spi_message rx_buf_msg; 234 u8 rx_addr_buf[2]; 235 struct spi_transfer rx_addr_trx; 236 u8 rx_lqi_buf[2]; 237 struct spi_transfer rx_lqi_trx; 238 u8 rx_fifo_buf[RX_FIFO_SIZE]; 239 struct spi_transfer rx_fifo_buf_trx; 240 241 /* isr handling for reading intstat */ 242 struct spi_message irq_msg; 243 u8 irq_buf[2]; 244 struct spi_transfer irq_trx; 245 }; 246 247 /* regmap information for short address register access */ 248 #define MRF24J40_SHORT_WRITE 0x01 249 #define MRF24J40_SHORT_READ 0x00 250 #define MRF24J40_SHORT_NUMREGS 0x3F 251 252 /* regmap information for long address register access */ 253 #define MRF24J40_LONG_ACCESS 0x80 254 #define MRF24J40_LONG_NUMREGS 0x38F 255 256 /* Read/Write SPI Commands for Short and Long Address registers. */ 257 #define MRF24J40_READSHORT(reg) ((reg) << 1) 258 #define MRF24J40_WRITESHORT(reg) ((reg) << 1 | 1) 259 #define MRF24J40_READLONG(reg) (1 << 15 | (reg) << 5) 260 #define MRF24J40_WRITELONG(reg) (1 << 15 | (reg) << 5 | 1 << 4) 261 262 /* The datasheet indicates the theoretical maximum for SCK to be 10MHz */ 263 #define MAX_SPI_SPEED_HZ 10000000 264 265 #define printdev(X) (&X->spi->dev) 266 267 static bool 268 mrf24j40_short_reg_writeable(struct device *dev, unsigned int reg) 269 { 270 switch (reg) { 271 case REG_RXMCR: 272 case REG_PANIDL: 273 case REG_PANIDH: 274 case REG_SADRL: 275 case REG_SADRH: 276 case REG_EADR0: 277 case REG_EADR1: 278 case REG_EADR2: 279 case REG_EADR3: 280 case REG_EADR4: 281 case REG_EADR5: 282 case REG_EADR6: 283 case REG_EADR7: 284 case REG_RXFLUSH: 285 case REG_ORDER: 286 case REG_TXMCR: 287 case REG_ACKTMOUT: 288 case REG_ESLOTG1: 289 case REG_SYMTICKL: 290 case REG_SYMTICKH: 291 case REG_PACON0: 292 case REG_PACON1: 293 case REG_PACON2: 294 case REG_TXBCON0: 295 case REG_TXNCON: 296 case REG_TXG1CON: 297 case REG_TXG2CON: 298 case REG_ESLOTG23: 299 case REG_ESLOTG45: 300 case REG_ESLOTG67: 301 case REG_TXPEND: 302 case REG_WAKECON: 303 case REG_FROMOFFSET: 304 case REG_TXBCON1: 305 case REG_GATECLK: 306 case REG_TXTIME: 307 case REG_HSYMTMRL: 308 case REG_HSYMTMRH: 309 case REG_SOFTRST: 310 case REG_SECCON0: 311 case REG_SECCON1: 312 case REG_TXSTBL: 313 case REG_RXSR: 314 case REG_INTCON: 315 case REG_TRISGPIO: 316 case REG_GPIO: 317 case REG_RFCTL: 318 case REG_SECCR2: 319 case REG_SLPACK: 320 case REG_BBREG0: 321 case REG_BBREG1: 322 case REG_BBREG2: 323 case REG_BBREG3: 324 case REG_BBREG4: 325 case REG_BBREG6: 326 case REG_CCAEDTH: 327 return true; 328 default: 329 return false; 330 } 331 } 332 333 static bool 334 mrf24j40_short_reg_readable(struct device *dev, unsigned int reg) 335 { 336 bool rc; 337 338 /* all writeable are also readable */ 339 rc = mrf24j40_short_reg_writeable(dev, reg); 340 if (rc) 341 return rc; 342 343 /* readonly regs */ 344 switch (reg) { 345 case REG_TXSTAT: 346 case REG_INTSTAT: 347 return true; 348 default: 349 return false; 350 } 351 } 352 353 static bool 354 mrf24j40_short_reg_volatile(struct device *dev, unsigned int reg) 355 { 356 /* can be changed during runtime */ 357 switch (reg) { 358 case REG_TXSTAT: 359 case REG_INTSTAT: 360 case REG_RXFLUSH: 361 case REG_TXNCON: 362 case REG_SOFTRST: 363 case REG_RFCTL: 364 case REG_TXBCON0: 365 case REG_TXG1CON: 366 case REG_TXG2CON: 367 case REG_TXBCON1: 368 case REG_SECCON0: 369 case REG_RXSR: 370 case REG_SLPACK: 371 case REG_SECCR2: 372 case REG_BBREG6: 373 /* use them in spi_async and regmap so it's volatile */ 374 case REG_BBREG1: 375 return true; 376 default: 377 return false; 378 } 379 } 380 381 static bool 382 mrf24j40_short_reg_precious(struct device *dev, unsigned int reg) 383 { 384 /* don't clear irq line on read */ 385 switch (reg) { 386 case REG_INTSTAT: 387 return true; 388 default: 389 return false; 390 } 391 } 392 393 static const struct regmap_config mrf24j40_short_regmap = { 394 .name = "mrf24j40_short", 395 .reg_bits = 7, 396 .val_bits = 8, 397 .pad_bits = 1, 398 .write_flag_mask = MRF24J40_SHORT_WRITE, 399 .read_flag_mask = MRF24J40_SHORT_READ, 400 .cache_type = REGCACHE_RBTREE, 401 .max_register = MRF24J40_SHORT_NUMREGS, 402 .writeable_reg = mrf24j40_short_reg_writeable, 403 .readable_reg = mrf24j40_short_reg_readable, 404 .volatile_reg = mrf24j40_short_reg_volatile, 405 .precious_reg = mrf24j40_short_reg_precious, 406 }; 407 408 static bool 409 mrf24j40_long_reg_writeable(struct device *dev, unsigned int reg) 410 { 411 switch (reg) { 412 case REG_RFCON0: 413 case REG_RFCON1: 414 case REG_RFCON2: 415 case REG_RFCON3: 416 case REG_RFCON5: 417 case REG_RFCON6: 418 case REG_RFCON7: 419 case REG_RFCON8: 420 case REG_SLPCAL2: 421 case REG_SLPCON0: 422 case REG_SLPCON1: 423 case REG_WAKETIMEL: 424 case REG_WAKETIMEH: 425 case REG_REMCNTL: 426 case REG_REMCNTH: 427 case REG_MAINCNT0: 428 case REG_MAINCNT1: 429 case REG_MAINCNT2: 430 case REG_MAINCNT3: 431 case REG_TESTMODE: 432 case REG_ASSOEAR0: 433 case REG_ASSOEAR1: 434 case REG_ASSOEAR2: 435 case REG_ASSOEAR3: 436 case REG_ASSOEAR4: 437 case REG_ASSOEAR5: 438 case REG_ASSOEAR6: 439 case REG_ASSOEAR7: 440 case REG_ASSOSAR0: 441 case REG_ASSOSAR1: 442 case REG_UNONCE0: 443 case REG_UNONCE1: 444 case REG_UNONCE2: 445 case REG_UNONCE3: 446 case REG_UNONCE4: 447 case REG_UNONCE5: 448 case REG_UNONCE6: 449 case REG_UNONCE7: 450 case REG_UNONCE8: 451 case REG_UNONCE9: 452 case REG_UNONCE10: 453 case REG_UNONCE11: 454 case REG_UNONCE12: 455 return true; 456 default: 457 return false; 458 } 459 } 460 461 static bool 462 mrf24j40_long_reg_readable(struct device *dev, unsigned int reg) 463 { 464 bool rc; 465 466 /* all writeable are also readable */ 467 rc = mrf24j40_long_reg_writeable(dev, reg); 468 if (rc) 469 return rc; 470 471 /* readonly regs */ 472 switch (reg) { 473 case REG_SLPCAL0: 474 case REG_SLPCAL1: 475 case REG_RFSTATE: 476 case REG_RSSI: 477 return true; 478 default: 479 return false; 480 } 481 } 482 483 static bool 484 mrf24j40_long_reg_volatile(struct device *dev, unsigned int reg) 485 { 486 /* can be changed during runtime */ 487 switch (reg) { 488 case REG_SLPCAL0: 489 case REG_SLPCAL1: 490 case REG_SLPCAL2: 491 case REG_RFSTATE: 492 case REG_RSSI: 493 case REG_MAINCNT3: 494 return true; 495 default: 496 return false; 497 } 498 } 499 500 static const struct regmap_config mrf24j40_long_regmap = { 501 .name = "mrf24j40_long", 502 .reg_bits = 11, 503 .val_bits = 8, 504 .pad_bits = 5, 505 .write_flag_mask = MRF24J40_LONG_ACCESS, 506 .read_flag_mask = MRF24J40_LONG_ACCESS, 507 .cache_type = REGCACHE_RBTREE, 508 .max_register = MRF24J40_LONG_NUMREGS, 509 .writeable_reg = mrf24j40_long_reg_writeable, 510 .readable_reg = mrf24j40_long_reg_readable, 511 .volatile_reg = mrf24j40_long_reg_volatile, 512 }; 513 514 static int mrf24j40_long_regmap_write(void *context, const void *data, 515 size_t count) 516 { 517 struct spi_device *spi = context; 518 u8 buf[3]; 519 520 if (count > 3) 521 return -EINVAL; 522 523 /* regmap supports read/write mask only in frist byte 524 * long write access need to set the 12th bit, so we 525 * make special handling for write. 526 */ 527 memcpy(buf, data, count); 528 buf[1] |= (1 << 4); 529 530 return spi_write(spi, buf, count); 531 } 532 533 static int 534 mrf24j40_long_regmap_read(void *context, const void *reg, size_t reg_size, 535 void *val, size_t val_size) 536 { 537 struct spi_device *spi = context; 538 539 return spi_write_then_read(spi, reg, reg_size, val, val_size); 540 } 541 542 static const struct regmap_bus mrf24j40_long_regmap_bus = { 543 .write = mrf24j40_long_regmap_write, 544 .read = mrf24j40_long_regmap_read, 545 .reg_format_endian_default = REGMAP_ENDIAN_BIG, 546 .val_format_endian_default = REGMAP_ENDIAN_BIG, 547 }; 548 549 static void write_tx_buf_complete(void *context) 550 { 551 struct mrf24j40 *devrec = context; 552 __le16 fc = ieee802154_get_fc_from_skb(devrec->tx_skb); 553 u8 val = BIT_TXNTRIG; 554 int ret; 555 556 if (ieee802154_is_secen(fc)) 557 val |= BIT_TXNSECEN; 558 559 if (ieee802154_is_ackreq(fc)) 560 val |= BIT_TXNACKREQ; 561 562 devrec->tx_post_msg.complete = NULL; 563 devrec->tx_post_buf[0] = MRF24J40_WRITESHORT(REG_TXNCON); 564 devrec->tx_post_buf[1] = val; 565 566 ret = spi_async(devrec->spi, &devrec->tx_post_msg); 567 if (ret) 568 dev_err(printdev(devrec), "SPI write Failed for transmit buf\n"); 569 } 570 571 /* This function relies on an undocumented write method. Once a write command 572 and address is set, as many bytes of data as desired can be clocked into 573 the device. The datasheet only shows setting one byte at a time. */ 574 static int write_tx_buf(struct mrf24j40 *devrec, u16 reg, 575 const u8 *data, size_t length) 576 { 577 u16 cmd; 578 int ret; 579 580 /* Range check the length. 2 bytes are used for the length fields.*/ 581 if (length > TX_FIFO_SIZE-2) { 582 dev_err(printdev(devrec), "write_tx_buf() was passed too large a buffer. Performing short write.\n"); 583 length = TX_FIFO_SIZE-2; 584 } 585 586 cmd = MRF24J40_WRITELONG(reg); 587 devrec->tx_hdr_buf[0] = cmd >> 8 & 0xff; 588 devrec->tx_hdr_buf[1] = cmd & 0xff; 589 devrec->tx_len_buf[0] = 0x0; /* Header Length. Set to 0 for now. TODO */ 590 devrec->tx_len_buf[1] = length; /* Total length */ 591 devrec->tx_buf_trx.tx_buf = data; 592 devrec->tx_buf_trx.len = length; 593 594 ret = spi_async(devrec->spi, &devrec->tx_msg); 595 if (ret) 596 dev_err(printdev(devrec), "SPI write Failed for TX buf\n"); 597 598 return ret; 599 } 600 601 static int mrf24j40_tx(struct ieee802154_hw *hw, struct sk_buff *skb) 602 { 603 struct mrf24j40 *devrec = hw->priv; 604 605 dev_dbg(printdev(devrec), "tx packet of %d bytes\n", skb->len); 606 devrec->tx_skb = skb; 607 608 return write_tx_buf(devrec, 0x000, skb->data, skb->len); 609 } 610 611 static int mrf24j40_ed(struct ieee802154_hw *hw, u8 *level) 612 { 613 /* TODO: */ 614 pr_warn("mrf24j40: ed not implemented\n"); 615 *level = 0; 616 return 0; 617 } 618 619 static int mrf24j40_start(struct ieee802154_hw *hw) 620 { 621 struct mrf24j40 *devrec = hw->priv; 622 623 dev_dbg(printdev(devrec), "start\n"); 624 625 /* Clear TXNIE and RXIE. Enable interrupts */ 626 return regmap_update_bits(devrec->regmap_short, REG_INTCON, 627 BIT_TXNIE | BIT_RXIE | BIT_SECIE, 0); 628 } 629 630 static void mrf24j40_stop(struct ieee802154_hw *hw) 631 { 632 struct mrf24j40 *devrec = hw->priv; 633 634 dev_dbg(printdev(devrec), "stop\n"); 635 636 /* Set TXNIE and RXIE. Disable Interrupts */ 637 regmap_update_bits(devrec->regmap_short, REG_INTCON, 638 BIT_TXNIE | BIT_TXNIE, BIT_TXNIE | BIT_TXNIE); 639 } 640 641 static int mrf24j40_set_channel(struct ieee802154_hw *hw, u8 page, u8 channel) 642 { 643 struct mrf24j40 *devrec = hw->priv; 644 u8 val; 645 int ret; 646 647 dev_dbg(printdev(devrec), "Set Channel %d\n", channel); 648 649 WARN_ON(page != 0); 650 WARN_ON(channel < MRF24J40_CHAN_MIN); 651 WARN_ON(channel > MRF24J40_CHAN_MAX); 652 653 /* Set Channel TODO */ 654 val = (channel - 11) << RFCON0_CH_SHIFT | RFOPT_RECOMMEND; 655 ret = regmap_update_bits(devrec->regmap_long, REG_RFCON0, 656 RFCON0_CH_MASK, val); 657 if (ret) 658 return ret; 659 660 /* RF Reset */ 661 ret = regmap_update_bits(devrec->regmap_short, REG_RFCTL, BIT_RFRST, 662 BIT_RFRST); 663 if (ret) 664 return ret; 665 666 ret = regmap_update_bits(devrec->regmap_short, REG_RFCTL, BIT_RFRST, 0); 667 if (!ret) 668 udelay(SET_CHANNEL_DELAY_US); /* per datasheet */ 669 670 return ret; 671 } 672 673 static int mrf24j40_filter(struct ieee802154_hw *hw, 674 struct ieee802154_hw_addr_filt *filt, 675 unsigned long changed) 676 { 677 struct mrf24j40 *devrec = hw->priv; 678 679 dev_dbg(printdev(devrec), "filter\n"); 680 681 if (changed & IEEE802154_AFILT_SADDR_CHANGED) { 682 /* Short Addr */ 683 u8 addrh, addrl; 684 685 addrh = le16_to_cpu(filt->short_addr) >> 8 & 0xff; 686 addrl = le16_to_cpu(filt->short_addr) & 0xff; 687 688 regmap_write(devrec->regmap_short, REG_SADRH, addrh); 689 regmap_write(devrec->regmap_short, REG_SADRL, addrl); 690 dev_dbg(printdev(devrec), 691 "Set short addr to %04hx\n", filt->short_addr); 692 } 693 694 if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) { 695 /* Device Address */ 696 u8 i, addr[8]; 697 698 memcpy(addr, &filt->ieee_addr, 8); 699 for (i = 0; i < 8; i++) 700 regmap_write(devrec->regmap_short, REG_EADR0 + i, 701 addr[i]); 702 703 #ifdef DEBUG 704 pr_debug("Set long addr to: "); 705 for (i = 0; i < 8; i++) 706 pr_debug("%02hhx ", addr[7 - i]); 707 pr_debug("\n"); 708 #endif 709 } 710 711 if (changed & IEEE802154_AFILT_PANID_CHANGED) { 712 /* PAN ID */ 713 u8 panidl, panidh; 714 715 panidh = le16_to_cpu(filt->pan_id) >> 8 & 0xff; 716 panidl = le16_to_cpu(filt->pan_id) & 0xff; 717 regmap_write(devrec->regmap_short, REG_PANIDH, panidh); 718 regmap_write(devrec->regmap_short, REG_PANIDL, panidl); 719 720 dev_dbg(printdev(devrec), "Set PANID to %04hx\n", filt->pan_id); 721 } 722 723 if (changed & IEEE802154_AFILT_PANC_CHANGED) { 724 /* Pan Coordinator */ 725 u8 val; 726 int ret; 727 728 if (filt->pan_coord) 729 val = BIT_PANCOORD; 730 else 731 val = 0; 732 ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR, 733 BIT_PANCOORD, val); 734 if (ret) 735 return ret; 736 737 /* REG_SLOTTED is maintained as default (unslotted/CSMA-CA). 738 * REG_ORDER is maintained as default (no beacon/superframe). 739 */ 740 741 dev_dbg(printdev(devrec), "Set Pan Coord to %s\n", 742 filt->pan_coord ? "on" : "off"); 743 } 744 745 return 0; 746 } 747 748 static void mrf24j40_handle_rx_read_buf_unlock(struct mrf24j40 *devrec) 749 { 750 int ret; 751 752 /* Turn back on reception of packets off the air. */ 753 devrec->rx_msg.complete = NULL; 754 devrec->rx_buf[0] = MRF24J40_WRITESHORT(REG_BBREG1); 755 devrec->rx_buf[1] = 0x00; /* CLR RXDECINV */ 756 ret = spi_async(devrec->spi, &devrec->rx_msg); 757 if (ret) 758 dev_err(printdev(devrec), "failed to unlock rx buffer\n"); 759 } 760 761 static void mrf24j40_handle_rx_read_buf_complete(void *context) 762 { 763 struct mrf24j40 *devrec = context; 764 u8 len = devrec->rx_buf[2]; 765 u8 rx_local_buf[RX_FIFO_SIZE]; 766 struct sk_buff *skb; 767 768 memcpy(rx_local_buf, devrec->rx_fifo_buf, len); 769 mrf24j40_handle_rx_read_buf_unlock(devrec); 770 771 skb = dev_alloc_skb(IEEE802154_MTU); 772 if (!skb) { 773 dev_err(printdev(devrec), "failed to allocate skb\n"); 774 return; 775 } 776 777 skb_put_data(skb, rx_local_buf, len); 778 ieee802154_rx_irqsafe(devrec->hw, skb, 0); 779 780 #ifdef DEBUG 781 print_hex_dump(KERN_DEBUG, "mrf24j40 rx: ", DUMP_PREFIX_OFFSET, 16, 1, 782 rx_local_buf, len, 0); 783 pr_debug("mrf24j40 rx: lqi: %02hhx rssi: %02hhx\n", 784 devrec->rx_lqi_buf[0], devrec->rx_lqi_buf[1]); 785 #endif 786 } 787 788 static void mrf24j40_handle_rx_read_buf(void *context) 789 { 790 struct mrf24j40 *devrec = context; 791 u16 cmd; 792 int ret; 793 794 /* if length is invalid read the full MTU */ 795 if (!ieee802154_is_valid_psdu_len(devrec->rx_buf[2])) 796 devrec->rx_buf[2] = IEEE802154_MTU; 797 798 cmd = MRF24J40_READLONG(REG_RX_FIFO + 1); 799 devrec->rx_addr_buf[0] = cmd >> 8 & 0xff; 800 devrec->rx_addr_buf[1] = cmd & 0xff; 801 devrec->rx_fifo_buf_trx.len = devrec->rx_buf[2]; 802 ret = spi_async(devrec->spi, &devrec->rx_buf_msg); 803 if (ret) { 804 dev_err(printdev(devrec), "failed to read rx buffer\n"); 805 mrf24j40_handle_rx_read_buf_unlock(devrec); 806 } 807 } 808 809 static void mrf24j40_handle_rx_read_len(void *context) 810 { 811 struct mrf24j40 *devrec = context; 812 u16 cmd; 813 int ret; 814 815 /* read the length of received frame */ 816 devrec->rx_msg.complete = mrf24j40_handle_rx_read_buf; 817 devrec->rx_trx.len = 3; 818 cmd = MRF24J40_READLONG(REG_RX_FIFO); 819 devrec->rx_buf[0] = cmd >> 8 & 0xff; 820 devrec->rx_buf[1] = cmd & 0xff; 821 822 ret = spi_async(devrec->spi, &devrec->rx_msg); 823 if (ret) { 824 dev_err(printdev(devrec), "failed to read rx buffer length\n"); 825 mrf24j40_handle_rx_read_buf_unlock(devrec); 826 } 827 } 828 829 static int mrf24j40_handle_rx(struct mrf24j40 *devrec) 830 { 831 /* Turn off reception of packets off the air. This prevents the 832 * device from overwriting the buffer while we're reading it. 833 */ 834 devrec->rx_msg.complete = mrf24j40_handle_rx_read_len; 835 devrec->rx_trx.len = 2; 836 devrec->rx_buf[0] = MRF24J40_WRITESHORT(REG_BBREG1); 837 devrec->rx_buf[1] = BIT_RXDECINV; /* SET RXDECINV */ 838 839 return spi_async(devrec->spi, &devrec->rx_msg); 840 } 841 842 static int 843 mrf24j40_csma_params(struct ieee802154_hw *hw, u8 min_be, u8 max_be, 844 u8 retries) 845 { 846 struct mrf24j40 *devrec = hw->priv; 847 u8 val; 848 849 /* min_be */ 850 val = min_be << TXMCR_MIN_BE_SHIFT; 851 /* csma backoffs */ 852 val |= retries << TXMCR_CSMA_RETRIES_SHIFT; 853 854 return regmap_update_bits(devrec->regmap_short, REG_TXMCR, 855 TXMCR_MIN_BE_MASK | TXMCR_CSMA_RETRIES_MASK, 856 val); 857 } 858 859 static int mrf24j40_set_cca_mode(struct ieee802154_hw *hw, 860 const struct wpan_phy_cca *cca) 861 { 862 struct mrf24j40 *devrec = hw->priv; 863 u8 val; 864 865 /* mapping 802.15.4 to driver spec */ 866 switch (cca->mode) { 867 case NL802154_CCA_ENERGY: 868 val = 2; 869 break; 870 case NL802154_CCA_CARRIER: 871 val = 1; 872 break; 873 case NL802154_CCA_ENERGY_CARRIER: 874 switch (cca->opt) { 875 case NL802154_CCA_OPT_ENERGY_CARRIER_AND: 876 val = 3; 877 break; 878 default: 879 return -EINVAL; 880 } 881 break; 882 default: 883 return -EINVAL; 884 } 885 886 return regmap_update_bits(devrec->regmap_short, REG_BBREG2, 887 BBREG2_CCA_MODE_MASK, 888 val << BBREG2_CCA_MODE_SHIFT); 889 } 890 891 /* array for representing ed levels */ 892 static const s32 mrf24j40_ed_levels[] = { 893 -9000, -8900, -8800, -8700, -8600, -8500, -8400, -8300, -8200, -8100, 894 -8000, -7900, -7800, -7700, -7600, -7500, -7400, -7300, -7200, -7100, 895 -7000, -6900, -6800, -6700, -6600, -6500, -6400, -6300, -6200, -6100, 896 -6000, -5900, -5800, -5700, -5600, -5500, -5400, -5300, -5200, -5100, 897 -5000, -4900, -4800, -4700, -4600, -4500, -4400, -4300, -4200, -4100, 898 -4000, -3900, -3800, -3700, -3600, -3500 899 }; 900 901 /* map ed levels to register value */ 902 static const s32 mrf24j40_ed_levels_map[][2] = { 903 { -9000, 0 }, { -8900, 1 }, { -8800, 2 }, { -8700, 5 }, { -8600, 9 }, 904 { -8500, 13 }, { -8400, 18 }, { -8300, 23 }, { -8200, 27 }, 905 { -8100, 32 }, { -8000, 37 }, { -7900, 43 }, { -7800, 48 }, 906 { -7700, 53 }, { -7600, 58 }, { -7500, 63 }, { -7400, 68 }, 907 { -7300, 73 }, { -7200, 78 }, { -7100, 83 }, { -7000, 89 }, 908 { -6900, 95 }, { -6800, 100 }, { -6700, 107 }, { -6600, 111 }, 909 { -6500, 117 }, { -6400, 121 }, { -6300, 125 }, { -6200, 129 }, 910 { -6100, 133 }, { -6000, 138 }, { -5900, 143 }, { -5800, 148 }, 911 { -5700, 153 }, { -5600, 159 }, { -5500, 165 }, { -5400, 170 }, 912 { -5300, 176 }, { -5200, 183 }, { -5100, 188 }, { -5000, 193 }, 913 { -4900, 198 }, { -4800, 203 }, { -4700, 207 }, { -4600, 212 }, 914 { -4500, 216 }, { -4400, 221 }, { -4300, 225 }, { -4200, 228 }, 915 { -4100, 233 }, { -4000, 239 }, { -3900, 245 }, { -3800, 250 }, 916 { -3700, 253 }, { -3600, 254 }, { -3500, 255 }, 917 }; 918 919 static int mrf24j40_set_cca_ed_level(struct ieee802154_hw *hw, s32 mbm) 920 { 921 struct mrf24j40 *devrec = hw->priv; 922 int i; 923 924 for (i = 0; i < ARRAY_SIZE(mrf24j40_ed_levels_map); i++) { 925 if (mrf24j40_ed_levels_map[i][0] == mbm) 926 return regmap_write(devrec->regmap_short, REG_CCAEDTH, 927 mrf24j40_ed_levels_map[i][1]); 928 } 929 930 return -EINVAL; 931 } 932 933 static const s32 mrf24j40ma_powers[] = { 934 0, -50, -120, -190, -280, -370, -490, -630, -1000, -1050, -1120, -1190, 935 -1280, -1370, -1490, -1630, -2000, -2050, -2120, -2190, -2280, -2370, 936 -2490, -2630, -3000, -3050, -3120, -3190, -3280, -3370, -3490, -3630, 937 }; 938 939 static int mrf24j40_set_txpower(struct ieee802154_hw *hw, s32 mbm) 940 { 941 struct mrf24j40 *devrec = hw->priv; 942 s32 small_scale; 943 u8 val; 944 945 if (0 >= mbm && mbm > -1000) { 946 val = TXPWRL_0 << TXPWRL_SHIFT; 947 small_scale = mbm; 948 } else if (-1000 >= mbm && mbm > -2000) { 949 val = TXPWRL_10 << TXPWRL_SHIFT; 950 small_scale = mbm + 1000; 951 } else if (-2000 >= mbm && mbm > -3000) { 952 val = TXPWRL_20 << TXPWRL_SHIFT; 953 small_scale = mbm + 2000; 954 } else if (-3000 >= mbm && mbm > -4000) { 955 val = TXPWRL_30 << TXPWRL_SHIFT; 956 small_scale = mbm + 3000; 957 } else { 958 return -EINVAL; 959 } 960 961 switch (small_scale) { 962 case 0: 963 val |= (TXPWRS_0 << TXPWRS_SHIFT); 964 break; 965 case -50: 966 val |= (TXPWRS_0_5 << TXPWRS_SHIFT); 967 break; 968 case -120: 969 val |= (TXPWRS_1_2 << TXPWRS_SHIFT); 970 break; 971 case -190: 972 val |= (TXPWRS_1_9 << TXPWRS_SHIFT); 973 break; 974 case -280: 975 val |= (TXPWRS_2_8 << TXPWRS_SHIFT); 976 break; 977 case -370: 978 val |= (TXPWRS_3_7 << TXPWRS_SHIFT); 979 break; 980 case -490: 981 val |= (TXPWRS_4_9 << TXPWRS_SHIFT); 982 break; 983 case -630: 984 val |= (TXPWRS_6_3 << TXPWRS_SHIFT); 985 break; 986 default: 987 return -EINVAL; 988 } 989 990 return regmap_update_bits(devrec->regmap_long, REG_RFCON3, 991 TXPWRL_MASK | TXPWRS_MASK, val); 992 } 993 994 static int mrf24j40_set_promiscuous_mode(struct ieee802154_hw *hw, bool on) 995 { 996 struct mrf24j40 *devrec = hw->priv; 997 int ret; 998 999 if (on) { 1000 /* set PROMI, ERRPKT and NOACKRSP */ 1001 ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR, 1002 BIT_PROMI | BIT_ERRPKT | BIT_NOACKRSP, 1003 BIT_PROMI | BIT_ERRPKT | BIT_NOACKRSP); 1004 } else { 1005 /* clear PROMI, ERRPKT and NOACKRSP */ 1006 ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR, 1007 BIT_PROMI | BIT_ERRPKT | BIT_NOACKRSP, 1008 0); 1009 } 1010 1011 return ret; 1012 } 1013 1014 static const struct ieee802154_ops mrf24j40_ops = { 1015 .owner = THIS_MODULE, 1016 .xmit_async = mrf24j40_tx, 1017 .ed = mrf24j40_ed, 1018 .start = mrf24j40_start, 1019 .stop = mrf24j40_stop, 1020 .set_channel = mrf24j40_set_channel, 1021 .set_hw_addr_filt = mrf24j40_filter, 1022 .set_csma_params = mrf24j40_csma_params, 1023 .set_cca_mode = mrf24j40_set_cca_mode, 1024 .set_cca_ed_level = mrf24j40_set_cca_ed_level, 1025 .set_txpower = mrf24j40_set_txpower, 1026 .set_promiscuous_mode = mrf24j40_set_promiscuous_mode, 1027 }; 1028 1029 static void mrf24j40_intstat_complete(void *context) 1030 { 1031 struct mrf24j40 *devrec = context; 1032 u8 intstat = devrec->irq_buf[1]; 1033 1034 enable_irq(devrec->spi->irq); 1035 1036 /* Ignore Rx security decryption */ 1037 if (intstat & BIT_SECIF) 1038 regmap_write_async(devrec->regmap_short, REG_SECCON0, 1039 BIT_SECIGNORE); 1040 1041 /* Check for TX complete */ 1042 if (intstat & BIT_TXNIF) 1043 ieee802154_xmit_complete(devrec->hw, devrec->tx_skb, false); 1044 1045 /* Check for Rx */ 1046 if (intstat & BIT_RXIF) 1047 mrf24j40_handle_rx(devrec); 1048 } 1049 1050 static irqreturn_t mrf24j40_isr(int irq, void *data) 1051 { 1052 struct mrf24j40 *devrec = data; 1053 int ret; 1054 1055 disable_irq_nosync(irq); 1056 1057 devrec->irq_buf[0] = MRF24J40_READSHORT(REG_INTSTAT); 1058 devrec->irq_buf[1] = 0; 1059 1060 /* Read the interrupt status */ 1061 ret = spi_async(devrec->spi, &devrec->irq_msg); 1062 if (ret) { 1063 enable_irq(irq); 1064 return IRQ_NONE; 1065 } 1066 1067 return IRQ_HANDLED; 1068 } 1069 1070 static int mrf24j40_hw_init(struct mrf24j40 *devrec) 1071 { 1072 u32 irq_type; 1073 int ret; 1074 1075 /* Initialize the device. 1076 From datasheet section 3.2: Initialization. */ 1077 ret = regmap_write(devrec->regmap_short, REG_SOFTRST, 0x07); 1078 if (ret) 1079 goto err_ret; 1080 1081 ret = regmap_write(devrec->regmap_short, REG_PACON2, 0x98); 1082 if (ret) 1083 goto err_ret; 1084 1085 ret = regmap_write(devrec->regmap_short, REG_TXSTBL, 0x95); 1086 if (ret) 1087 goto err_ret; 1088 1089 ret = regmap_write(devrec->regmap_long, REG_RFCON0, 0x03); 1090 if (ret) 1091 goto err_ret; 1092 1093 ret = regmap_write(devrec->regmap_long, REG_RFCON1, 0x01); 1094 if (ret) 1095 goto err_ret; 1096 1097 ret = regmap_write(devrec->regmap_long, REG_RFCON2, 0x80); 1098 if (ret) 1099 goto err_ret; 1100 1101 ret = regmap_write(devrec->regmap_long, REG_RFCON6, 0x90); 1102 if (ret) 1103 goto err_ret; 1104 1105 ret = regmap_write(devrec->regmap_long, REG_RFCON7, 0x80); 1106 if (ret) 1107 goto err_ret; 1108 1109 ret = regmap_write(devrec->regmap_long, REG_RFCON8, 0x10); 1110 if (ret) 1111 goto err_ret; 1112 1113 ret = regmap_write(devrec->regmap_long, REG_SLPCON1, 0x21); 1114 if (ret) 1115 goto err_ret; 1116 1117 ret = regmap_write(devrec->regmap_short, REG_BBREG2, 0x80); 1118 if (ret) 1119 goto err_ret; 1120 1121 ret = regmap_write(devrec->regmap_short, REG_CCAEDTH, 0x60); 1122 if (ret) 1123 goto err_ret; 1124 1125 ret = regmap_write(devrec->regmap_short, REG_BBREG6, 0x40); 1126 if (ret) 1127 goto err_ret; 1128 1129 ret = regmap_write(devrec->regmap_short, REG_RFCTL, 0x04); 1130 if (ret) 1131 goto err_ret; 1132 1133 ret = regmap_write(devrec->regmap_short, REG_RFCTL, 0x0); 1134 if (ret) 1135 goto err_ret; 1136 1137 udelay(192); 1138 1139 /* Set RX Mode. RXMCR<1:0>: 0x0 normal, 0x1 promisc, 0x2 error */ 1140 ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR, 0x03, 0x00); 1141 if (ret) 1142 goto err_ret; 1143 1144 if (spi_get_device_id(devrec->spi)->driver_data == MRF24J40MC) { 1145 /* Enable external amplifier. 1146 * From MRF24J40MC datasheet section 1.3: Operation. 1147 */ 1148 regmap_update_bits(devrec->regmap_long, REG_TESTMODE, 0x07, 1149 0x07); 1150 1151 /* Set GPIO3 as output. */ 1152 regmap_update_bits(devrec->regmap_short, REG_TRISGPIO, 0x08, 1153 0x08); 1154 1155 /* Set GPIO3 HIGH to enable U5 voltage regulator */ 1156 regmap_update_bits(devrec->regmap_short, REG_GPIO, 0x08, 0x08); 1157 1158 /* Reduce TX pwr to meet FCC requirements. 1159 * From MRF24J40MC datasheet section 3.1.1 1160 */ 1161 regmap_write(devrec->regmap_long, REG_RFCON3, 0x28); 1162 } 1163 1164 irq_type = irq_get_trigger_type(devrec->spi->irq); 1165 if (irq_type == IRQ_TYPE_EDGE_RISING || 1166 irq_type == IRQ_TYPE_EDGE_FALLING) 1167 dev_warn(&devrec->spi->dev, 1168 "Using edge triggered irq's are not recommended, because it can cause races and result in a non-functional driver!\n"); 1169 switch (irq_type) { 1170 case IRQ_TYPE_EDGE_RISING: 1171 case IRQ_TYPE_LEVEL_HIGH: 1172 /* set interrupt polarity to rising */ 1173 ret = regmap_update_bits(devrec->regmap_long, REG_SLPCON0, 1174 BIT_INTEDGE, BIT_INTEDGE); 1175 if (ret) 1176 goto err_ret; 1177 break; 1178 default: 1179 /* default is falling edge */ 1180 break; 1181 } 1182 1183 return 0; 1184 1185 err_ret: 1186 return ret; 1187 } 1188 1189 static void 1190 mrf24j40_setup_tx_spi_messages(struct mrf24j40 *devrec) 1191 { 1192 spi_message_init(&devrec->tx_msg); 1193 devrec->tx_msg.context = devrec; 1194 devrec->tx_msg.complete = write_tx_buf_complete; 1195 devrec->tx_hdr_trx.len = 2; 1196 devrec->tx_hdr_trx.tx_buf = devrec->tx_hdr_buf; 1197 spi_message_add_tail(&devrec->tx_hdr_trx, &devrec->tx_msg); 1198 devrec->tx_len_trx.len = 2; 1199 devrec->tx_len_trx.tx_buf = devrec->tx_len_buf; 1200 spi_message_add_tail(&devrec->tx_len_trx, &devrec->tx_msg); 1201 spi_message_add_tail(&devrec->tx_buf_trx, &devrec->tx_msg); 1202 1203 spi_message_init(&devrec->tx_post_msg); 1204 devrec->tx_post_msg.context = devrec; 1205 devrec->tx_post_trx.len = 2; 1206 devrec->tx_post_trx.tx_buf = devrec->tx_post_buf; 1207 spi_message_add_tail(&devrec->tx_post_trx, &devrec->tx_post_msg); 1208 } 1209 1210 static void 1211 mrf24j40_setup_rx_spi_messages(struct mrf24j40 *devrec) 1212 { 1213 spi_message_init(&devrec->rx_msg); 1214 devrec->rx_msg.context = devrec; 1215 devrec->rx_trx.len = 2; 1216 devrec->rx_trx.tx_buf = devrec->rx_buf; 1217 devrec->rx_trx.rx_buf = devrec->rx_buf; 1218 spi_message_add_tail(&devrec->rx_trx, &devrec->rx_msg); 1219 1220 spi_message_init(&devrec->rx_buf_msg); 1221 devrec->rx_buf_msg.context = devrec; 1222 devrec->rx_buf_msg.complete = mrf24j40_handle_rx_read_buf_complete; 1223 devrec->rx_addr_trx.len = 2; 1224 devrec->rx_addr_trx.tx_buf = devrec->rx_addr_buf; 1225 spi_message_add_tail(&devrec->rx_addr_trx, &devrec->rx_buf_msg); 1226 devrec->rx_fifo_buf_trx.rx_buf = devrec->rx_fifo_buf; 1227 spi_message_add_tail(&devrec->rx_fifo_buf_trx, &devrec->rx_buf_msg); 1228 devrec->rx_lqi_trx.len = 2; 1229 devrec->rx_lqi_trx.rx_buf = devrec->rx_lqi_buf; 1230 spi_message_add_tail(&devrec->rx_lqi_trx, &devrec->rx_buf_msg); 1231 } 1232 1233 static void 1234 mrf24j40_setup_irq_spi_messages(struct mrf24j40 *devrec) 1235 { 1236 spi_message_init(&devrec->irq_msg); 1237 devrec->irq_msg.context = devrec; 1238 devrec->irq_msg.complete = mrf24j40_intstat_complete; 1239 devrec->irq_trx.len = 2; 1240 devrec->irq_trx.tx_buf = devrec->irq_buf; 1241 devrec->irq_trx.rx_buf = devrec->irq_buf; 1242 spi_message_add_tail(&devrec->irq_trx, &devrec->irq_msg); 1243 } 1244 1245 static void mrf24j40_phy_setup(struct mrf24j40 *devrec) 1246 { 1247 ieee802154_random_extended_addr(&devrec->hw->phy->perm_extended_addr); 1248 devrec->hw->phy->current_channel = 11; 1249 1250 /* mrf24j40 supports max_minbe 0 - 3 */ 1251 devrec->hw->phy->supported.max_minbe = 3; 1252 /* datasheet doesn't say anything about max_be, but we have min_be 1253 * So we assume the max_be default. 1254 */ 1255 devrec->hw->phy->supported.min_maxbe = 5; 1256 devrec->hw->phy->supported.max_maxbe = 5; 1257 1258 devrec->hw->phy->cca.mode = NL802154_CCA_CARRIER; 1259 devrec->hw->phy->supported.cca_modes = BIT(NL802154_CCA_ENERGY) | 1260 BIT(NL802154_CCA_CARRIER) | 1261 BIT(NL802154_CCA_ENERGY_CARRIER); 1262 devrec->hw->phy->supported.cca_opts = BIT(NL802154_CCA_OPT_ENERGY_CARRIER_AND); 1263 1264 devrec->hw->phy->cca_ed_level = -6900; 1265 devrec->hw->phy->supported.cca_ed_levels = mrf24j40_ed_levels; 1266 devrec->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(mrf24j40_ed_levels); 1267 1268 switch (spi_get_device_id(devrec->spi)->driver_data) { 1269 case MRF24J40: 1270 case MRF24J40MA: 1271 devrec->hw->phy->supported.tx_powers = mrf24j40ma_powers; 1272 devrec->hw->phy->supported.tx_powers_size = ARRAY_SIZE(mrf24j40ma_powers); 1273 devrec->hw->phy->flags |= WPAN_PHY_FLAG_TXPOWER; 1274 break; 1275 default: 1276 break; 1277 } 1278 } 1279 1280 static int mrf24j40_probe(struct spi_device *spi) 1281 { 1282 int ret = -ENOMEM, irq_type; 1283 struct ieee802154_hw *hw; 1284 struct mrf24j40 *devrec; 1285 1286 dev_info(&spi->dev, "probe(). IRQ: %d\n", spi->irq); 1287 1288 /* Register with the 802154 subsystem */ 1289 1290 hw = ieee802154_alloc_hw(sizeof(*devrec), &mrf24j40_ops); 1291 if (!hw) 1292 goto err_ret; 1293 1294 devrec = hw->priv; 1295 devrec->spi = spi; 1296 spi_set_drvdata(spi, devrec); 1297 devrec->hw = hw; 1298 devrec->hw->parent = &spi->dev; 1299 devrec->hw->phy->supported.channels[0] = CHANNEL_MASK; 1300 devrec->hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AFILT | 1301 IEEE802154_HW_CSMA_PARAMS | 1302 IEEE802154_HW_PROMISCUOUS; 1303 1304 devrec->hw->phy->flags = WPAN_PHY_FLAG_CCA_MODE | 1305 WPAN_PHY_FLAG_CCA_ED_LEVEL; 1306 1307 mrf24j40_setup_tx_spi_messages(devrec); 1308 mrf24j40_setup_rx_spi_messages(devrec); 1309 mrf24j40_setup_irq_spi_messages(devrec); 1310 1311 devrec->regmap_short = devm_regmap_init_spi(spi, 1312 &mrf24j40_short_regmap); 1313 if (IS_ERR(devrec->regmap_short)) { 1314 ret = PTR_ERR(devrec->regmap_short); 1315 dev_err(&spi->dev, "Failed to allocate short register map: %d\n", 1316 ret); 1317 goto err_register_device; 1318 } 1319 1320 devrec->regmap_long = devm_regmap_init(&spi->dev, 1321 &mrf24j40_long_regmap_bus, 1322 spi, &mrf24j40_long_regmap); 1323 if (IS_ERR(devrec->regmap_long)) { 1324 ret = PTR_ERR(devrec->regmap_long); 1325 dev_err(&spi->dev, "Failed to allocate long register map: %d\n", 1326 ret); 1327 goto err_register_device; 1328 } 1329 1330 if (spi->max_speed_hz > MAX_SPI_SPEED_HZ) { 1331 dev_warn(&spi->dev, "spi clock above possible maximum: %d", 1332 MAX_SPI_SPEED_HZ); 1333 ret = -EINVAL; 1334 goto err_register_device; 1335 } 1336 1337 ret = mrf24j40_hw_init(devrec); 1338 if (ret) 1339 goto err_register_device; 1340 1341 mrf24j40_phy_setup(devrec); 1342 1343 /* request IRQF_TRIGGER_LOW as fallback default */ 1344 irq_type = irq_get_trigger_type(spi->irq); 1345 if (!irq_type) 1346 irq_type = IRQF_TRIGGER_LOW; 1347 1348 ret = devm_request_irq(&spi->dev, spi->irq, mrf24j40_isr, 1349 irq_type, dev_name(&spi->dev), devrec); 1350 if (ret) { 1351 dev_err(printdev(devrec), "Unable to get IRQ"); 1352 goto err_register_device; 1353 } 1354 1355 dev_dbg(printdev(devrec), "registered mrf24j40\n"); 1356 ret = ieee802154_register_hw(devrec->hw); 1357 if (ret) 1358 goto err_register_device; 1359 1360 return 0; 1361 1362 err_register_device: 1363 ieee802154_free_hw(devrec->hw); 1364 err_ret: 1365 return ret; 1366 } 1367 1368 static int mrf24j40_remove(struct spi_device *spi) 1369 { 1370 struct mrf24j40 *devrec = spi_get_drvdata(spi); 1371 1372 dev_dbg(printdev(devrec), "remove\n"); 1373 1374 ieee802154_unregister_hw(devrec->hw); 1375 ieee802154_free_hw(devrec->hw); 1376 /* TODO: Will ieee802154_free_device() wait until ->xmit() is 1377 * complete? */ 1378 1379 return 0; 1380 } 1381 1382 static const struct of_device_id mrf24j40_of_match[] = { 1383 { .compatible = "microchip,mrf24j40", .data = (void *)MRF24J40 }, 1384 { .compatible = "microchip,mrf24j40ma", .data = (void *)MRF24J40MA }, 1385 { .compatible = "microchip,mrf24j40mc", .data = (void *)MRF24J40MC }, 1386 { }, 1387 }; 1388 MODULE_DEVICE_TABLE(of, mrf24j40_of_match); 1389 1390 static const struct spi_device_id mrf24j40_ids[] = { 1391 { "mrf24j40", MRF24J40 }, 1392 { "mrf24j40ma", MRF24J40MA }, 1393 { "mrf24j40mc", MRF24J40MC }, 1394 { }, 1395 }; 1396 MODULE_DEVICE_TABLE(spi, mrf24j40_ids); 1397 1398 static struct spi_driver mrf24j40_driver = { 1399 .driver = { 1400 .of_match_table = of_match_ptr(mrf24j40_of_match), 1401 .name = "mrf24j40", 1402 }, 1403 .id_table = mrf24j40_ids, 1404 .probe = mrf24j40_probe, 1405 .remove = mrf24j40_remove, 1406 }; 1407 1408 module_spi_driver(mrf24j40_driver); 1409 1410 MODULE_LICENSE("GPL"); 1411 MODULE_AUTHOR("Alan Ott"); 1412 MODULE_DESCRIPTION("MRF24J40 SPI 802.15.4 Controller Driver"); 1413