1 /* 2 * http://www.cascoda.com/products/ca-821x/ 3 * Copyright (c) 2016, Cascoda, Ltd. 4 * All rights reserved. 5 * 6 * This code is dual-licensed under both GPLv2 and 3-clause BSD. What follows is 7 * the license notice for both respectively. 8 * 9 ******************************************************************************* 10 * 11 * This program is free software; you can redistribute it and/or 12 * modify it under the terms of the GNU General Public License 13 * as published by the Free Software Foundation; either version 2 14 * of the License, or (at your option) any later version. 15 * 16 * This program is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * 21 ******************************************************************************* 22 * 23 * Redistribution and use in source and binary forms, with or without 24 * modification, are permitted provided that the following conditions are met: 25 * 26 * 1. Redistributions of source code must retain the above copyright notice, 27 * this list of conditions and the following disclaimer. 28 * 29 * 2. Redistributions in binary form must reproduce the above copyright notice, 30 * this list of conditions and the following disclaimer in the documentation 31 * and/or other materials provided with the distribution. 32 * 33 * 3. Neither the name of the copyright holder nor the names of its contributors 34 * may be used to endorse or promote products derived from this software without 35 * specific prior written permission. 36 * 37 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 38 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 39 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 40 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE 41 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 42 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 43 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 44 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 45 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 46 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 47 * POSSIBILITY OF SUCH DAMAGE. 48 */ 49 50 #include <linux/cdev.h> 51 #include <linux/clk-provider.h> 52 #include <linux/debugfs.h> 53 #include <linux/delay.h> 54 #include <linux/gpio.h> 55 #include <linux/ieee802154.h> 56 #include <linux/io.h> 57 #include <linux/kfifo.h> 58 #include <linux/of.h> 59 #include <linux/of_device.h> 60 #include <linux/of_gpio.h> 61 #include <linux/module.h> 62 #include <linux/mutex.h> 63 #include <linux/poll.h> 64 #include <linux/skbuff.h> 65 #include <linux/slab.h> 66 #include <linux/spi/spi.h> 67 #include <linux/spinlock.h> 68 #include <linux/string.h> 69 #include <linux/workqueue.h> 70 #include <linux/interrupt.h> 71 72 #include <net/ieee802154_netdev.h> 73 #include <net/mac802154.h> 74 75 #define DRIVER_NAME "ca8210" 76 77 /* external clock frequencies */ 78 #define ONE_MHZ 1000000 79 #define TWO_MHZ (2 * ONE_MHZ) 80 #define FOUR_MHZ (4 * ONE_MHZ) 81 #define EIGHT_MHZ (8 * ONE_MHZ) 82 #define SIXTEEN_MHZ (16 * ONE_MHZ) 83 84 /* spi constants */ 85 #define CA8210_SPI_BUF_SIZE 256 86 #define CA8210_SYNC_TIMEOUT 1000 /* Timeout for synchronous commands [ms] */ 87 88 /* test interface constants */ 89 #define CA8210_TEST_INT_FILE_NAME "ca8210_test" 90 #define CA8210_TEST_INT_FIFO_SIZE 256 91 92 /* MAC status enumerations */ 93 #define MAC_SUCCESS (0x00) 94 #define MAC_ERROR (0x01) 95 #define MAC_CANCELLED (0x02) 96 #define MAC_READY_FOR_POLL (0x03) 97 #define MAC_COUNTER_ERROR (0xDB) 98 #define MAC_IMPROPER_KEY_TYPE (0xDC) 99 #define MAC_IMPROPER_SECURITY_LEVEL (0xDD) 100 #define MAC_UNSUPPORTED_LEGACY (0xDE) 101 #define MAC_UNSUPPORTED_SECURITY (0xDF) 102 #define MAC_BEACON_LOST (0xE0) 103 #define MAC_CHANNEL_ACCESS_FAILURE (0xE1) 104 #define MAC_DENIED (0xE2) 105 #define MAC_DISABLE_TRX_FAILURE (0xE3) 106 #define MAC_SECURITY_ERROR (0xE4) 107 #define MAC_FRAME_TOO_LONG (0xE5) 108 #define MAC_INVALID_GTS (0xE6) 109 #define MAC_INVALID_HANDLE (0xE7) 110 #define MAC_INVALID_PARAMETER (0xE8) 111 #define MAC_NO_ACK (0xE9) 112 #define MAC_NO_BEACON (0xEA) 113 #define MAC_NO_DATA (0xEB) 114 #define MAC_NO_SHORT_ADDRESS (0xEC) 115 #define MAC_OUT_OF_CAP (0xED) 116 #define MAC_PAN_ID_CONFLICT (0xEE) 117 #define MAC_REALIGNMENT (0xEF) 118 #define MAC_TRANSACTION_EXPIRED (0xF0) 119 #define MAC_TRANSACTION_OVERFLOW (0xF1) 120 #define MAC_TX_ACTIVE (0xF2) 121 #define MAC_UNAVAILABLE_KEY (0xF3) 122 #define MAC_UNSUPPORTED_ATTRIBUTE (0xF4) 123 #define MAC_INVALID_ADDRESS (0xF5) 124 #define MAC_ON_TIME_TOO_LONG (0xF6) 125 #define MAC_PAST_TIME (0xF7) 126 #define MAC_TRACKING_OFF (0xF8) 127 #define MAC_INVALID_INDEX (0xF9) 128 #define MAC_LIMIT_REACHED (0xFA) 129 #define MAC_READ_ONLY (0xFB) 130 #define MAC_SCAN_IN_PROGRESS (0xFC) 131 #define MAC_SUPERFRAME_OVERLAP (0xFD) 132 #define MAC_SYSTEM_ERROR (0xFF) 133 134 /* HWME attribute IDs */ 135 #define HWME_EDTHRESHOLD (0x04) 136 #define HWME_EDVALUE (0x06) 137 #define HWME_SYSCLKOUT (0x0F) 138 #define HWME_LQILIMIT (0x11) 139 140 /* TDME attribute IDs */ 141 #define TDME_CHANNEL (0x00) 142 #define TDME_ATM_CONFIG (0x06) 143 144 #define MAX_HWME_ATTRIBUTE_SIZE 16 145 #define MAX_TDME_ATTRIBUTE_SIZE 2 146 147 /* PHY/MAC PIB Attribute Enumerations */ 148 #define PHY_CURRENT_CHANNEL (0x00) 149 #define PHY_TRANSMIT_POWER (0x02) 150 #define PHY_CCA_MODE (0x03) 151 #define MAC_ASSOCIATION_PERMIT (0x41) 152 #define MAC_AUTO_REQUEST (0x42) 153 #define MAC_BATT_LIFE_EXT (0x43) 154 #define MAC_BATT_LIFE_EXT_PERIODS (0x44) 155 #define MAC_BEACON_PAYLOAD (0x45) 156 #define MAC_BEACON_PAYLOAD_LENGTH (0x46) 157 #define MAC_BEACON_ORDER (0x47) 158 #define MAC_GTS_PERMIT (0x4d) 159 #define MAC_MAX_CSMA_BACKOFFS (0x4e) 160 #define MAC_MIN_BE (0x4f) 161 #define MAC_PAN_ID (0x50) 162 #define MAC_PROMISCUOUS_MODE (0x51) 163 #define MAC_RX_ON_WHEN_IDLE (0x52) 164 #define MAC_SHORT_ADDRESS (0x53) 165 #define MAC_SUPERFRAME_ORDER (0x54) 166 #define MAC_ASSOCIATED_PAN_COORD (0x56) 167 #define MAC_MAX_BE (0x57) 168 #define MAC_MAX_FRAME_RETRIES (0x59) 169 #define MAC_RESPONSE_WAIT_TIME (0x5A) 170 #define MAC_SECURITY_ENABLED (0x5D) 171 172 #define MAC_AUTO_REQUEST_SECURITY_LEVEL (0x78) 173 #define MAC_AUTO_REQUEST_KEY_ID_MODE (0x79) 174 175 #define NS_IEEE_ADDRESS (0xFF) /* Non-standard IEEE address */ 176 177 /* MAC Address Mode Definitions */ 178 #define MAC_MODE_NO_ADDR (0x00) 179 #define MAC_MODE_SHORT_ADDR (0x02) 180 #define MAC_MODE_LONG_ADDR (0x03) 181 182 /* MAC constants */ 183 #define MAX_BEACON_OVERHEAD (75) 184 #define MAX_BEACON_PAYLOAD_LENGTH (IEEE802154_MTU - MAX_BEACON_OVERHEAD) 185 186 #define MAX_ATTRIBUTE_SIZE (122) 187 #define MAX_DATA_SIZE (114) 188 189 #define CA8210_VALID_CHANNELS (0x07FFF800) 190 191 /* MAC workarounds for V1.1 and MPW silicon (V0.x) */ 192 #define CA8210_MAC_WORKAROUNDS (0) 193 #define CA8210_MAC_MPW (0) 194 195 /* memory manipulation macros */ 196 #define LS_BYTE(x) ((u8)((x) & 0xFF)) 197 #define MS_BYTE(x) ((u8)(((x) >> 8) & 0xFF)) 198 199 /* message ID codes in SPI commands */ 200 /* downstream */ 201 #define MCPS_DATA_REQUEST (0x00) 202 #define MLME_ASSOCIATE_REQUEST (0x02) 203 #define MLME_ASSOCIATE_RESPONSE (0x03) 204 #define MLME_DISASSOCIATE_REQUEST (0x04) 205 #define MLME_GET_REQUEST (0x05) 206 #define MLME_ORPHAN_RESPONSE (0x06) 207 #define MLME_RESET_REQUEST (0x07) 208 #define MLME_RX_ENABLE_REQUEST (0x08) 209 #define MLME_SCAN_REQUEST (0x09) 210 #define MLME_SET_REQUEST (0x0A) 211 #define MLME_START_REQUEST (0x0B) 212 #define MLME_POLL_REQUEST (0x0D) 213 #define HWME_SET_REQUEST (0x0E) 214 #define HWME_GET_REQUEST (0x0F) 215 #define TDME_SETSFR_REQUEST (0x11) 216 #define TDME_GETSFR_REQUEST (0x12) 217 #define TDME_SET_REQUEST (0x14) 218 /* upstream */ 219 #define MCPS_DATA_INDICATION (0x00) 220 #define MCPS_DATA_CONFIRM (0x01) 221 #define MLME_RESET_CONFIRM (0x0A) 222 #define MLME_SET_CONFIRM (0x0E) 223 #define MLME_START_CONFIRM (0x0F) 224 #define HWME_SET_CONFIRM (0x12) 225 #define HWME_GET_CONFIRM (0x13) 226 #define HWME_WAKEUP_INDICATION (0x15) 227 #define TDME_SETSFR_CONFIRM (0x17) 228 229 /* SPI command IDs */ 230 /* bit indicating a confirm or indication from slave to master */ 231 #define SPI_S2M (0x20) 232 /* bit indicating a synchronous message */ 233 #define SPI_SYN (0x40) 234 235 /* SPI command definitions */ 236 #define SPI_IDLE (0xFF) 237 #define SPI_NACK (0xF0) 238 239 #define SPI_MCPS_DATA_REQUEST (MCPS_DATA_REQUEST) 240 #define SPI_MCPS_DATA_INDICATION (MCPS_DATA_INDICATION + SPI_S2M) 241 #define SPI_MCPS_DATA_CONFIRM (MCPS_DATA_CONFIRM + SPI_S2M) 242 243 #define SPI_MLME_ASSOCIATE_REQUEST (MLME_ASSOCIATE_REQUEST) 244 #define SPI_MLME_RESET_REQUEST (MLME_RESET_REQUEST + SPI_SYN) 245 #define SPI_MLME_SET_REQUEST (MLME_SET_REQUEST + SPI_SYN) 246 #define SPI_MLME_START_REQUEST (MLME_START_REQUEST + SPI_SYN) 247 #define SPI_MLME_RESET_CONFIRM (MLME_RESET_CONFIRM + SPI_S2M + SPI_SYN) 248 #define SPI_MLME_SET_CONFIRM (MLME_SET_CONFIRM + SPI_S2M + SPI_SYN) 249 #define SPI_MLME_START_CONFIRM (MLME_START_CONFIRM + SPI_S2M + SPI_SYN) 250 251 #define SPI_HWME_SET_REQUEST (HWME_SET_REQUEST + SPI_SYN) 252 #define SPI_HWME_GET_REQUEST (HWME_GET_REQUEST + SPI_SYN) 253 #define SPI_HWME_SET_CONFIRM (HWME_SET_CONFIRM + SPI_S2M + SPI_SYN) 254 #define SPI_HWME_GET_CONFIRM (HWME_GET_CONFIRM + SPI_S2M + SPI_SYN) 255 #define SPI_HWME_WAKEUP_INDICATION (HWME_WAKEUP_INDICATION + SPI_S2M) 256 257 #define SPI_TDME_SETSFR_REQUEST (TDME_SETSFR_REQUEST + SPI_SYN) 258 #define SPI_TDME_SET_REQUEST (TDME_SET_REQUEST + SPI_SYN) 259 #define SPI_TDME_SETSFR_CONFIRM (TDME_SETSFR_CONFIRM + SPI_S2M + SPI_SYN) 260 261 /* TDME SFR addresses */ 262 /* Page 0 */ 263 #define CA8210_SFR_PACFG (0xB1) 264 #define CA8210_SFR_MACCON (0xD8) 265 #define CA8210_SFR_PACFGIB (0xFE) 266 /* Page 1 */ 267 #define CA8210_SFR_LOTXCAL (0xBF) 268 #define CA8210_SFR_PTHRH (0xD1) 269 #define CA8210_SFR_PRECFG (0xD3) 270 #define CA8210_SFR_LNAGX40 (0xE1) 271 #define CA8210_SFR_LNAGX41 (0xE2) 272 #define CA8210_SFR_LNAGX42 (0xE3) 273 #define CA8210_SFR_LNAGX43 (0xE4) 274 #define CA8210_SFR_LNAGX44 (0xE5) 275 #define CA8210_SFR_LNAGX45 (0xE6) 276 #define CA8210_SFR_LNAGX46 (0xE7) 277 #define CA8210_SFR_LNAGX47 (0xE9) 278 279 #define PACFGIB_DEFAULT_CURRENT (0x3F) 280 #define PTHRH_DEFAULT_THRESHOLD (0x5A) 281 #define LNAGX40_DEFAULT_GAIN (0x29) /* 10dB */ 282 #define LNAGX41_DEFAULT_GAIN (0x54) /* 21dB */ 283 #define LNAGX42_DEFAULT_GAIN (0x6C) /* 27dB */ 284 #define LNAGX43_DEFAULT_GAIN (0x7A) /* 30dB */ 285 #define LNAGX44_DEFAULT_GAIN (0x84) /* 33dB */ 286 #define LNAGX45_DEFAULT_GAIN (0x8B) /* 34dB */ 287 #define LNAGX46_DEFAULT_GAIN (0x92) /* 36dB */ 288 #define LNAGX47_DEFAULT_GAIN (0x96) /* 37dB */ 289 290 #define CA8210_IOCTL_HARD_RESET (0x00) 291 292 /* Structs/Enums */ 293 294 /** 295 * struct cas_control - spi transfer structure 296 * @msg: spi_message for each exchange 297 * @transfer: spi_transfer for each exchange 298 * @tx_buf: source array for transmission 299 * @tx_in_buf: array storing bytes received during transmission 300 * @priv: pointer to private data 301 * 302 * This structure stores all the necessary data passed around during a single 303 * spi exchange. 304 */ 305 struct cas_control { 306 struct spi_message msg; 307 struct spi_transfer transfer; 308 309 u8 tx_buf[CA8210_SPI_BUF_SIZE]; 310 u8 tx_in_buf[CA8210_SPI_BUF_SIZE]; 311 312 struct ca8210_priv *priv; 313 }; 314 315 /** 316 * struct ca8210_test - ca8210 test interface structure 317 * @ca8210_dfs_spi_int: pointer to the entry in the debug fs for this device 318 * @up_fifo: fifo for upstream messages 319 * @readq: read wait queue 320 * 321 * This structure stores all the data pertaining to the debug interface 322 */ 323 struct ca8210_test { 324 struct dentry *ca8210_dfs_spi_int; 325 struct kfifo up_fifo; 326 wait_queue_head_t readq; 327 }; 328 329 /** 330 * struct ca8210_priv - ca8210 private data structure 331 * @spi: pointer to the ca8210 spi device object 332 * @hw: pointer to the ca8210 ieee802154_hw object 333 * @hw_registered: true if hw has been registered with ieee802154 334 * @lock: spinlock protecting the private data area 335 * @mlme_workqueue: workqueue for triggering MLME Reset 336 * @irq_workqueue: workqueue for irq processing 337 * @tx_skb: current socket buffer to transmit 338 * @nextmsduhandle: msdu handle to pass to the 15.4 MAC layer for the 339 * next transmission 340 * @clk: external clock provided by the ca8210 341 * @last_dsn: sequence number of last data packet received, for 342 * resend detection 343 * @test: test interface data section for this instance 344 * @async_tx_pending: true if an asynchronous transmission was started and 345 * is not complete 346 * @sync_command_response: pointer to buffer to fill with sync response 347 * @ca8210_is_awake: nonzero if ca8210 is initialised, ready for comms 348 * @sync_down: counts number of downstream synchronous commands 349 * @sync_up: counts number of upstream synchronous commands 350 * @spi_transfer_complete: completion object for a single spi_transfer 351 * @sync_exchange_complete: completion object for a complete synchronous API 352 * exchange 353 * @promiscuous: whether the ca8210 is in promiscuous mode or not 354 * @retries: records how many times the current pending spi 355 * transfer has been retried 356 */ 357 struct ca8210_priv { 358 struct spi_device *spi; 359 struct ieee802154_hw *hw; 360 bool hw_registered; 361 spinlock_t lock; 362 struct workqueue_struct *mlme_workqueue; 363 struct workqueue_struct *irq_workqueue; 364 struct sk_buff *tx_skb; 365 u8 nextmsduhandle; 366 struct clk *clk; 367 int last_dsn; 368 struct ca8210_test test; 369 bool async_tx_pending; 370 u8 *sync_command_response; 371 struct completion ca8210_is_awake; 372 int sync_down, sync_up; 373 struct completion spi_transfer_complete, sync_exchange_complete; 374 bool promiscuous; 375 int retries; 376 }; 377 378 /** 379 * struct work_priv_container - link between a work object and the relevant 380 * device's private data 381 * @work: work object being executed 382 * @priv: device's private data section 383 * 384 */ 385 struct work_priv_container { 386 struct work_struct work; 387 struct ca8210_priv *priv; 388 }; 389 390 /** 391 * struct ca8210_platform_data - ca8210 platform data structure 392 * @extclockenable: true if the external clock is to be enabled 393 * @extclockfreq: frequency of the external clock 394 * @extclockgpio: ca8210 output gpio of the external clock 395 * @gpio_reset: gpio number of ca8210 reset line 396 * @gpio_irq: gpio number of ca8210 interrupt line 397 * @irq_id: identifier for the ca8210 irq 398 * 399 */ 400 struct ca8210_platform_data { 401 bool extclockenable; 402 unsigned int extclockfreq; 403 unsigned int extclockgpio; 404 int gpio_reset; 405 int gpio_irq; 406 int irq_id; 407 }; 408 409 /** 410 * struct fulladdr - full MAC addressing information structure 411 * @mode: address mode (none, short, extended) 412 * @pan_id: 16-bit LE pan id 413 * @address: LE address, variable length as specified by mode 414 * 415 */ 416 struct fulladdr { 417 u8 mode; 418 u8 pan_id[2]; 419 u8 address[8]; 420 }; 421 422 /** 423 * union macaddr: generic MAC address container 424 * @short_address: 16-bit short address 425 * @ieee_address: 64-bit extended address as LE byte array 426 * 427 */ 428 union macaddr { 429 u16 short_address; 430 u8 ieee_address[8]; 431 }; 432 433 /** 434 * struct secspec: security specification for SAP commands 435 * @security_level: 0-7, controls level of authentication & encryption 436 * @key_id_mode: 0-3, specifies how to obtain key 437 * @key_source: extended key retrieval data 438 * @key_index: single-byte key identifier 439 * 440 */ 441 struct secspec { 442 u8 security_level; 443 u8 key_id_mode; 444 u8 key_source[8]; 445 u8 key_index; 446 }; 447 448 /* downlink functions parameter set definitions */ 449 struct mcps_data_request_pset { 450 u8 src_addr_mode; 451 struct fulladdr dst; 452 u8 msdu_length; 453 u8 msdu_handle; 454 u8 tx_options; 455 u8 msdu[MAX_DATA_SIZE]; 456 }; 457 458 struct mlme_set_request_pset { 459 u8 pib_attribute; 460 u8 pib_attribute_index; 461 u8 pib_attribute_length; 462 u8 pib_attribute_value[MAX_ATTRIBUTE_SIZE]; 463 }; 464 465 struct hwme_set_request_pset { 466 u8 hw_attribute; 467 u8 hw_attribute_length; 468 u8 hw_attribute_value[MAX_HWME_ATTRIBUTE_SIZE]; 469 }; 470 471 struct hwme_get_request_pset { 472 u8 hw_attribute; 473 }; 474 475 struct tdme_setsfr_request_pset { 476 u8 sfr_page; 477 u8 sfr_address; 478 u8 sfr_value; 479 }; 480 481 /* uplink functions parameter set definitions */ 482 struct hwme_set_confirm_pset { 483 u8 status; 484 u8 hw_attribute; 485 }; 486 487 struct hwme_get_confirm_pset { 488 u8 status; 489 u8 hw_attribute; 490 u8 hw_attribute_length; 491 u8 hw_attribute_value[MAX_HWME_ATTRIBUTE_SIZE]; 492 }; 493 494 struct tdme_setsfr_confirm_pset { 495 u8 status; 496 u8 sfr_page; 497 u8 sfr_address; 498 }; 499 500 struct mac_message { 501 u8 command_id; 502 u8 length; 503 union { 504 struct mcps_data_request_pset data_req; 505 struct mlme_set_request_pset set_req; 506 struct hwme_set_request_pset hwme_set_req; 507 struct hwme_get_request_pset hwme_get_req; 508 struct tdme_setsfr_request_pset tdme_set_sfr_req; 509 struct hwme_set_confirm_pset hwme_set_cnf; 510 struct hwme_get_confirm_pset hwme_get_cnf; 511 struct tdme_setsfr_confirm_pset tdme_set_sfr_cnf; 512 u8 u8param; 513 u8 status; 514 u8 payload[148]; 515 } pdata; 516 }; 517 518 union pa_cfg_sfr { 519 struct { 520 u8 bias_current_trim : 3; 521 u8 /* reserved */ : 1; 522 u8 buffer_capacitor_trim : 3; 523 u8 boost : 1; 524 }; 525 u8 paib; 526 }; 527 528 struct preamble_cfg_sfr { 529 u8 timeout_symbols : 3; 530 u8 acquisition_symbols : 3; 531 u8 search_symbols : 2; 532 }; 533 534 static int (*cascoda_api_upstream)( 535 const u8 *buf, 536 size_t len, 537 void *device_ref 538 ); 539 540 /** 541 * link_to_linux_err() - Translates an 802.15.4 return code into the closest 542 * linux error 543 * @link_status: 802.15.4 status code 544 * 545 * Return: 0 or Linux error code 546 */ 547 static int link_to_linux_err(int link_status) 548 { 549 if (link_status < 0) { 550 /* status is already a Linux code */ 551 return link_status; 552 } 553 switch (link_status) { 554 case MAC_SUCCESS: 555 case MAC_REALIGNMENT: 556 return 0; 557 case MAC_IMPROPER_KEY_TYPE: 558 return -EKEYREJECTED; 559 case MAC_IMPROPER_SECURITY_LEVEL: 560 case MAC_UNSUPPORTED_LEGACY: 561 case MAC_DENIED: 562 return -EACCES; 563 case MAC_BEACON_LOST: 564 case MAC_NO_ACK: 565 case MAC_NO_BEACON: 566 return -ENETUNREACH; 567 case MAC_CHANNEL_ACCESS_FAILURE: 568 case MAC_TX_ACTIVE: 569 case MAC_SCAN_IN_PROGRESS: 570 return -EBUSY; 571 case MAC_DISABLE_TRX_FAILURE: 572 case MAC_OUT_OF_CAP: 573 return -EAGAIN; 574 case MAC_FRAME_TOO_LONG: 575 return -EMSGSIZE; 576 case MAC_INVALID_GTS: 577 case MAC_PAST_TIME: 578 return -EBADSLT; 579 case MAC_INVALID_HANDLE: 580 return -EBADMSG; 581 case MAC_INVALID_PARAMETER: 582 case MAC_UNSUPPORTED_ATTRIBUTE: 583 case MAC_ON_TIME_TOO_LONG: 584 case MAC_INVALID_INDEX: 585 return -EINVAL; 586 case MAC_NO_DATA: 587 return -ENODATA; 588 case MAC_NO_SHORT_ADDRESS: 589 return -EFAULT; 590 case MAC_PAN_ID_CONFLICT: 591 return -EADDRINUSE; 592 case MAC_TRANSACTION_EXPIRED: 593 return -ETIME; 594 case MAC_TRANSACTION_OVERFLOW: 595 return -ENOBUFS; 596 case MAC_UNAVAILABLE_KEY: 597 return -ENOKEY; 598 case MAC_INVALID_ADDRESS: 599 return -ENXIO; 600 case MAC_TRACKING_OFF: 601 case MAC_SUPERFRAME_OVERLAP: 602 return -EREMOTEIO; 603 case MAC_LIMIT_REACHED: 604 return -EDQUOT; 605 case MAC_READ_ONLY: 606 return -EROFS; 607 default: 608 return -EPROTO; 609 } 610 } 611 612 /** 613 * ca8210_test_int_driver_write() - Writes a message to the test interface to be 614 * read by the userspace 615 * @buf: Buffer containing upstream message 616 * @len: length of message to write 617 * @spi: SPI device of message originator 618 * 619 * Return: 0 or linux error code 620 */ 621 static int ca8210_test_int_driver_write( 622 const u8 *buf, 623 size_t len, 624 void *spi 625 ) 626 { 627 struct ca8210_priv *priv = spi_get_drvdata(spi); 628 struct ca8210_test *test = &priv->test; 629 char *fifo_buffer; 630 int i; 631 632 dev_dbg( 633 &priv->spi->dev, 634 "test_interface: Buffering upstream message:\n" 635 ); 636 for (i = 0; i < len; i++) 637 dev_dbg(&priv->spi->dev, "%#03x\n", buf[i]); 638 639 fifo_buffer = kmemdup(buf, len, GFP_KERNEL); 640 if (!fifo_buffer) 641 return -ENOMEM; 642 kfifo_in(&test->up_fifo, &fifo_buffer, 4); 643 wake_up_interruptible(&priv->test.readq); 644 645 return 0; 646 } 647 648 /* SPI Operation */ 649 650 static int ca8210_net_rx( 651 struct ieee802154_hw *hw, 652 u8 *command, 653 size_t len 654 ); 655 static u8 mlme_reset_request_sync( 656 u8 set_default_pib, 657 void *device_ref 658 ); 659 static int ca8210_spi_transfer( 660 struct spi_device *spi, 661 const u8 *buf, 662 size_t len 663 ); 664 665 /** 666 * ca8210_reset_send() - Hard resets the ca8210 for a given time 667 * @spi: Pointer to target ca8210 spi device 668 * @ms: Milliseconds to hold the reset line low for 669 */ 670 static void ca8210_reset_send(struct spi_device *spi, unsigned int ms) 671 { 672 struct ca8210_platform_data *pdata = spi->dev.platform_data; 673 struct ca8210_priv *priv = spi_get_drvdata(spi); 674 long status; 675 676 gpio_set_value(pdata->gpio_reset, 0); 677 reinit_completion(&priv->ca8210_is_awake); 678 msleep(ms); 679 gpio_set_value(pdata->gpio_reset, 1); 680 priv->promiscuous = false; 681 682 /* Wait until wakeup indication seen */ 683 status = wait_for_completion_interruptible_timeout( 684 &priv->ca8210_is_awake, 685 msecs_to_jiffies(CA8210_SYNC_TIMEOUT) 686 ); 687 if (status == 0) { 688 dev_crit( 689 &spi->dev, 690 "Fatal: No wakeup from ca8210 after reset!\n" 691 ); 692 } 693 694 dev_dbg(&spi->dev, "Reset the device\n"); 695 } 696 697 /** 698 * ca8210_mlme_reset_worker() - Resets the MLME, Called when the MAC OVERFLOW 699 * condition happens. 700 * @work: Pointer to work being executed 701 */ 702 static void ca8210_mlme_reset_worker(struct work_struct *work) 703 { 704 struct work_priv_container *wpc = container_of( 705 work, 706 struct work_priv_container, 707 work 708 ); 709 struct ca8210_priv *priv = wpc->priv; 710 711 mlme_reset_request_sync(0, priv->spi); 712 kfree(wpc); 713 } 714 715 /** 716 * ca8210_rx_done() - Calls various message dispatches responding to a received 717 * command 718 * @cas_ctl: Pointer to the cas_control object for the relevant spi transfer 719 * 720 * Presents a received SAP command from the ca8210 to the Cascoda EVBME, test 721 * interface and network driver. 722 */ 723 static void ca8210_rx_done(struct cas_control *cas_ctl) 724 { 725 u8 *buf; 726 unsigned int len; 727 struct work_priv_container *mlme_reset_wpc; 728 struct ca8210_priv *priv = cas_ctl->priv; 729 730 buf = cas_ctl->tx_in_buf; 731 len = buf[1] + 2; 732 if (len > CA8210_SPI_BUF_SIZE) { 733 dev_crit( 734 &priv->spi->dev, 735 "Received packet len (%u) erroneously long\n", 736 len 737 ); 738 goto finish; 739 } 740 741 if (buf[0] & SPI_SYN) { 742 if (priv->sync_command_response) { 743 memcpy(priv->sync_command_response, buf, len); 744 complete(&priv->sync_exchange_complete); 745 } else { 746 if (cascoda_api_upstream) 747 cascoda_api_upstream(buf, len, priv->spi); 748 priv->sync_up++; 749 } 750 } else { 751 if (cascoda_api_upstream) 752 cascoda_api_upstream(buf, len, priv->spi); 753 } 754 755 ca8210_net_rx(priv->hw, buf, len); 756 if (buf[0] == SPI_MCPS_DATA_CONFIRM) { 757 if (buf[3] == MAC_TRANSACTION_OVERFLOW) { 758 dev_info( 759 &priv->spi->dev, 760 "Waiting for transaction overflow to stabilise...\n"); 761 msleep(2000); 762 dev_info( 763 &priv->spi->dev, 764 "Resetting MAC...\n"); 765 766 mlme_reset_wpc = kmalloc(sizeof(*mlme_reset_wpc), 767 GFP_KERNEL); 768 if (!mlme_reset_wpc) 769 goto finish; 770 INIT_WORK( 771 &mlme_reset_wpc->work, 772 ca8210_mlme_reset_worker 773 ); 774 mlme_reset_wpc->priv = priv; 775 queue_work(priv->mlme_workqueue, &mlme_reset_wpc->work); 776 } 777 } else if (buf[0] == SPI_HWME_WAKEUP_INDICATION) { 778 dev_notice( 779 &priv->spi->dev, 780 "Wakeup indication received, reason:\n" 781 ); 782 switch (buf[2]) { 783 case 0: 784 dev_notice( 785 &priv->spi->dev, 786 "Transceiver woken up from Power Up / System Reset\n" 787 ); 788 break; 789 case 1: 790 dev_notice( 791 &priv->spi->dev, 792 "Watchdog Timer Time-Out\n" 793 ); 794 break; 795 case 2: 796 dev_notice( 797 &priv->spi->dev, 798 "Transceiver woken up from Power-Off by Sleep Timer Time-Out\n"); 799 break; 800 case 3: 801 dev_notice( 802 &priv->spi->dev, 803 "Transceiver woken up from Power-Off by GPIO Activity\n" 804 ); 805 break; 806 case 4: 807 dev_notice( 808 &priv->spi->dev, 809 "Transceiver woken up from Standby by Sleep Timer Time-Out\n" 810 ); 811 break; 812 case 5: 813 dev_notice( 814 &priv->spi->dev, 815 "Transceiver woken up from Standby by GPIO Activity\n" 816 ); 817 break; 818 case 6: 819 dev_notice( 820 &priv->spi->dev, 821 "Sleep-Timer Time-Out in Active Mode\n" 822 ); 823 break; 824 default: 825 dev_warn(&priv->spi->dev, "Wakeup reason unknown\n"); 826 break; 827 } 828 complete(&priv->ca8210_is_awake); 829 } 830 831 finish:; 832 } 833 834 static int ca8210_remove(struct spi_device *spi_device); 835 836 /** 837 * ca8210_spi_transfer_complete() - Called when a single spi transfer has 838 * completed 839 * @context: Pointer to the cas_control object for the finished transfer 840 */ 841 static void ca8210_spi_transfer_complete(void *context) 842 { 843 struct cas_control *cas_ctl = context; 844 struct ca8210_priv *priv = cas_ctl->priv; 845 bool duplex_rx = false; 846 int i; 847 u8 retry_buffer[CA8210_SPI_BUF_SIZE]; 848 849 if ( 850 cas_ctl->tx_in_buf[0] == SPI_NACK || 851 (cas_ctl->tx_in_buf[0] == SPI_IDLE && 852 cas_ctl->tx_in_buf[1] == SPI_NACK) 853 ) { 854 /* ca8210 is busy */ 855 dev_info(&priv->spi->dev, "ca8210 was busy during attempted write\n"); 856 if (cas_ctl->tx_buf[0] == SPI_IDLE) { 857 dev_warn( 858 &priv->spi->dev, 859 "IRQ servicing NACKd, dropping transfer\n" 860 ); 861 kfree(cas_ctl); 862 return; 863 } 864 if (priv->retries > 3) { 865 dev_err(&priv->spi->dev, "too many retries!\n"); 866 kfree(cas_ctl); 867 ca8210_remove(priv->spi); 868 return; 869 } 870 memcpy(retry_buffer, cas_ctl->tx_buf, CA8210_SPI_BUF_SIZE); 871 kfree(cas_ctl); 872 ca8210_spi_transfer( 873 priv->spi, 874 retry_buffer, 875 CA8210_SPI_BUF_SIZE 876 ); 877 priv->retries++; 878 dev_info(&priv->spi->dev, "retried spi write\n"); 879 return; 880 } else if ( 881 cas_ctl->tx_in_buf[0] != SPI_IDLE && 882 cas_ctl->tx_in_buf[0] != SPI_NACK 883 ) { 884 duplex_rx = true; 885 } 886 887 if (duplex_rx) { 888 dev_dbg(&priv->spi->dev, "READ CMD DURING TX\n"); 889 for (i = 0; i < cas_ctl->tx_in_buf[1] + 2; i++) 890 dev_dbg( 891 &priv->spi->dev, 892 "%#03x\n", 893 cas_ctl->tx_in_buf[i] 894 ); 895 ca8210_rx_done(cas_ctl); 896 } 897 complete(&priv->spi_transfer_complete); 898 kfree(cas_ctl); 899 priv->retries = 0; 900 } 901 902 /** 903 * ca8210_spi_transfer() - Initiate duplex spi transfer with ca8210 904 * @spi: Pointer to spi device for transfer 905 * @buf: Octet array to send 906 * @len: length of the buffer being sent 907 * 908 * Return: 0 or linux error code 909 */ 910 static int ca8210_spi_transfer( 911 struct spi_device *spi, 912 const u8 *buf, 913 size_t len 914 ) 915 { 916 int i, status = 0; 917 struct ca8210_priv *priv; 918 struct cas_control *cas_ctl; 919 920 if (!spi) { 921 pr_crit("NULL spi device passed to %s\n", __func__); 922 return -ENODEV; 923 } 924 925 priv = spi_get_drvdata(spi); 926 reinit_completion(&priv->spi_transfer_complete); 927 928 dev_dbg(&spi->dev, "%s called\n", __func__); 929 930 cas_ctl = kmalloc(sizeof(*cas_ctl), GFP_ATOMIC); 931 if (!cas_ctl) 932 return -ENOMEM; 933 934 cas_ctl->priv = priv; 935 memset(cas_ctl->tx_buf, SPI_IDLE, CA8210_SPI_BUF_SIZE); 936 memset(cas_ctl->tx_in_buf, SPI_IDLE, CA8210_SPI_BUF_SIZE); 937 memcpy(cas_ctl->tx_buf, buf, len); 938 939 for (i = 0; i < len; i++) 940 dev_dbg(&spi->dev, "%#03x\n", cas_ctl->tx_buf[i]); 941 942 spi_message_init(&cas_ctl->msg); 943 944 cas_ctl->transfer.tx_nbits = 1; /* 1 MOSI line */ 945 cas_ctl->transfer.rx_nbits = 1; /* 1 MISO line */ 946 cas_ctl->transfer.speed_hz = 0; /* Use device setting */ 947 cas_ctl->transfer.bits_per_word = 0; /* Use device setting */ 948 cas_ctl->transfer.tx_buf = cas_ctl->tx_buf; 949 cas_ctl->transfer.rx_buf = cas_ctl->tx_in_buf; 950 cas_ctl->transfer.delay.value = 0; 951 cas_ctl->transfer.delay.unit = SPI_DELAY_UNIT_USECS; 952 cas_ctl->transfer.cs_change = 0; 953 cas_ctl->transfer.len = sizeof(struct mac_message); 954 cas_ctl->msg.complete = ca8210_spi_transfer_complete; 955 cas_ctl->msg.context = cas_ctl; 956 957 spi_message_add_tail( 958 &cas_ctl->transfer, 959 &cas_ctl->msg 960 ); 961 962 status = spi_async(spi, &cas_ctl->msg); 963 if (status < 0) { 964 dev_crit( 965 &spi->dev, 966 "status %d from spi_sync in write\n", 967 status 968 ); 969 } 970 971 return status; 972 } 973 974 /** 975 * ca8210_spi_exchange() - Exchange API/SAP commands with the radio 976 * @buf: Octet array of command being sent downstream 977 * @len: length of buf 978 * @response: buffer for storing synchronous response 979 * @device_ref: spi_device pointer for ca8210 980 * 981 * Effectively calls ca8210_spi_transfer to write buf[] to the spi, then for 982 * synchronous commands waits for the corresponding response to be read from 983 * the spi before returning. The response is written to the response parameter. 984 * 985 * Return: 0 or linux error code 986 */ 987 static int ca8210_spi_exchange( 988 const u8 *buf, 989 size_t len, 990 u8 *response, 991 void *device_ref 992 ) 993 { 994 int status = 0; 995 struct spi_device *spi = device_ref; 996 struct ca8210_priv *priv = spi->dev.driver_data; 997 long wait_remaining; 998 999 if ((buf[0] & SPI_SYN) && response) { /* if sync wait for confirm */ 1000 reinit_completion(&priv->sync_exchange_complete); 1001 priv->sync_command_response = response; 1002 } 1003 1004 do { 1005 reinit_completion(&priv->spi_transfer_complete); 1006 status = ca8210_spi_transfer(priv->spi, buf, len); 1007 if (status) { 1008 dev_warn( 1009 &spi->dev, 1010 "spi write failed, returned %d\n", 1011 status 1012 ); 1013 if (status == -EBUSY) 1014 continue; 1015 if (((buf[0] & SPI_SYN) && response)) 1016 complete(&priv->sync_exchange_complete); 1017 goto cleanup; 1018 } 1019 1020 wait_remaining = wait_for_completion_interruptible_timeout( 1021 &priv->spi_transfer_complete, 1022 msecs_to_jiffies(1000) 1023 ); 1024 if (wait_remaining == -ERESTARTSYS) { 1025 status = -ERESTARTSYS; 1026 } else if (wait_remaining == 0) { 1027 dev_err( 1028 &spi->dev, 1029 "SPI downstream transfer timed out!\n" 1030 ); 1031 status = -ETIME; 1032 goto cleanup; 1033 } 1034 } while (status < 0); 1035 1036 if (!((buf[0] & SPI_SYN) && response)) 1037 goto cleanup; 1038 1039 wait_remaining = wait_for_completion_interruptible_timeout( 1040 &priv->sync_exchange_complete, 1041 msecs_to_jiffies(CA8210_SYNC_TIMEOUT) 1042 ); 1043 if (wait_remaining == -ERESTARTSYS) { 1044 status = -ERESTARTSYS; 1045 } else if (wait_remaining == 0) { 1046 dev_err( 1047 &spi->dev, 1048 "Synchronous confirm timeout\n" 1049 ); 1050 status = -ETIME; 1051 } 1052 1053 cleanup: 1054 priv->sync_command_response = NULL; 1055 return status; 1056 } 1057 1058 /** 1059 * ca8210_interrupt_handler() - Called when an irq is received from the ca8210 1060 * @irq: Id of the irq being handled 1061 * @dev_id: Pointer passed by the system, pointing to the ca8210's private data 1062 * 1063 * This function is called when the irq line from the ca8210 is asserted, 1064 * signifying that the ca8210 has a message to send upstream to us. Starts the 1065 * asynchronous spi read. 1066 * 1067 * Return: irq return code 1068 */ 1069 static irqreturn_t ca8210_interrupt_handler(int irq, void *dev_id) 1070 { 1071 struct ca8210_priv *priv = dev_id; 1072 int status; 1073 1074 dev_dbg(&priv->spi->dev, "irq: Interrupt occurred\n"); 1075 do { 1076 status = ca8210_spi_transfer(priv->spi, NULL, 0); 1077 if (status && (status != -EBUSY)) { 1078 dev_warn( 1079 &priv->spi->dev, 1080 "spi read failed, returned %d\n", 1081 status 1082 ); 1083 } 1084 } while (status == -EBUSY); 1085 return IRQ_HANDLED; 1086 } 1087 1088 static int (*cascoda_api_downstream)( 1089 const u8 *buf, 1090 size_t len, 1091 u8 *response, 1092 void *device_ref 1093 ) = ca8210_spi_exchange; 1094 1095 /* Cascoda API / 15.4 SAP Primitives */ 1096 1097 /** 1098 * tdme_setsfr_request_sync() - TDME_SETSFR_request/confirm according to API 1099 * @sfr_page: SFR Page 1100 * @sfr_address: SFR Address 1101 * @sfr_value: SFR Value 1102 * @device_ref: Nondescript pointer to target device 1103 * 1104 * Return: 802.15.4 status code of TDME-SETSFR.confirm 1105 */ 1106 static u8 tdme_setsfr_request_sync( 1107 u8 sfr_page, 1108 u8 sfr_address, 1109 u8 sfr_value, 1110 void *device_ref 1111 ) 1112 { 1113 int ret; 1114 struct mac_message command, response; 1115 struct spi_device *spi = device_ref; 1116 1117 command.command_id = SPI_TDME_SETSFR_REQUEST; 1118 command.length = 3; 1119 command.pdata.tdme_set_sfr_req.sfr_page = sfr_page; 1120 command.pdata.tdme_set_sfr_req.sfr_address = sfr_address; 1121 command.pdata.tdme_set_sfr_req.sfr_value = sfr_value; 1122 response.command_id = SPI_IDLE; 1123 ret = cascoda_api_downstream( 1124 &command.command_id, 1125 command.length + 2, 1126 &response.command_id, 1127 device_ref 1128 ); 1129 if (ret) { 1130 dev_crit(&spi->dev, "cascoda_api_downstream returned %d", ret); 1131 return MAC_SYSTEM_ERROR; 1132 } 1133 1134 if (response.command_id != SPI_TDME_SETSFR_CONFIRM) { 1135 dev_crit( 1136 &spi->dev, 1137 "sync response to SPI_TDME_SETSFR_REQUEST was not SPI_TDME_SETSFR_CONFIRM, it was %d\n", 1138 response.command_id 1139 ); 1140 return MAC_SYSTEM_ERROR; 1141 } 1142 1143 return response.pdata.tdme_set_sfr_cnf.status; 1144 } 1145 1146 /** 1147 * tdme_chipinit() - TDME Chip Register Default Initialisation Macro 1148 * @device_ref: Nondescript pointer to target device 1149 * 1150 * Return: 802.15.4 status code of API calls 1151 */ 1152 static u8 tdme_chipinit(void *device_ref) 1153 { 1154 u8 status = MAC_SUCCESS; 1155 u8 sfr_address; 1156 struct spi_device *spi = device_ref; 1157 struct preamble_cfg_sfr pre_cfg_value = { 1158 .timeout_symbols = 3, 1159 .acquisition_symbols = 3, 1160 .search_symbols = 1, 1161 }; 1162 /* LNA Gain Settings */ 1163 status = tdme_setsfr_request_sync( 1164 1, (sfr_address = CA8210_SFR_LNAGX40), 1165 LNAGX40_DEFAULT_GAIN, device_ref); 1166 if (status) 1167 goto finish; 1168 status = tdme_setsfr_request_sync( 1169 1, (sfr_address = CA8210_SFR_LNAGX41), 1170 LNAGX41_DEFAULT_GAIN, device_ref); 1171 if (status) 1172 goto finish; 1173 status = tdme_setsfr_request_sync( 1174 1, (sfr_address = CA8210_SFR_LNAGX42), 1175 LNAGX42_DEFAULT_GAIN, device_ref); 1176 if (status) 1177 goto finish; 1178 status = tdme_setsfr_request_sync( 1179 1, (sfr_address = CA8210_SFR_LNAGX43), 1180 LNAGX43_DEFAULT_GAIN, device_ref); 1181 if (status) 1182 goto finish; 1183 status = tdme_setsfr_request_sync( 1184 1, (sfr_address = CA8210_SFR_LNAGX44), 1185 LNAGX44_DEFAULT_GAIN, device_ref); 1186 if (status) 1187 goto finish; 1188 status = tdme_setsfr_request_sync( 1189 1, (sfr_address = CA8210_SFR_LNAGX45), 1190 LNAGX45_DEFAULT_GAIN, device_ref); 1191 if (status) 1192 goto finish; 1193 status = tdme_setsfr_request_sync( 1194 1, (sfr_address = CA8210_SFR_LNAGX46), 1195 LNAGX46_DEFAULT_GAIN, device_ref); 1196 if (status) 1197 goto finish; 1198 status = tdme_setsfr_request_sync( 1199 1, (sfr_address = CA8210_SFR_LNAGX47), 1200 LNAGX47_DEFAULT_GAIN, device_ref); 1201 if (status) 1202 goto finish; 1203 /* Preamble Timing Config */ 1204 status = tdme_setsfr_request_sync( 1205 1, (sfr_address = CA8210_SFR_PRECFG), 1206 *((u8 *)&pre_cfg_value), device_ref); 1207 if (status) 1208 goto finish; 1209 /* Preamble Threshold High */ 1210 status = tdme_setsfr_request_sync( 1211 1, (sfr_address = CA8210_SFR_PTHRH), 1212 PTHRH_DEFAULT_THRESHOLD, device_ref); 1213 if (status) 1214 goto finish; 1215 /* Tx Output Power 8 dBm */ 1216 status = tdme_setsfr_request_sync( 1217 0, (sfr_address = CA8210_SFR_PACFGIB), 1218 PACFGIB_DEFAULT_CURRENT, device_ref); 1219 if (status) 1220 goto finish; 1221 1222 finish: 1223 if (status != MAC_SUCCESS) { 1224 dev_err( 1225 &spi->dev, 1226 "failed to set sfr at %#03x, status = %#03x\n", 1227 sfr_address, 1228 status 1229 ); 1230 } 1231 return status; 1232 } 1233 1234 /** 1235 * tdme_channelinit() - TDME Channel Register Default Initialisation Macro (Tx) 1236 * @channel: 802.15.4 channel to initialise chip for 1237 * @device_ref: Nondescript pointer to target device 1238 * 1239 * Return: 802.15.4 status code of API calls 1240 */ 1241 static u8 tdme_channelinit(u8 channel, void *device_ref) 1242 { 1243 /* Transceiver front-end local oscillator tx two-point calibration 1244 * value. Tuned for the hardware. 1245 */ 1246 u8 txcalval; 1247 1248 if (channel >= 25) 1249 txcalval = 0xA7; 1250 else if (channel >= 23) 1251 txcalval = 0xA8; 1252 else if (channel >= 22) 1253 txcalval = 0xA9; 1254 else if (channel >= 20) 1255 txcalval = 0xAA; 1256 else if (channel >= 17) 1257 txcalval = 0xAB; 1258 else if (channel >= 16) 1259 txcalval = 0xAC; 1260 else if (channel >= 14) 1261 txcalval = 0xAD; 1262 else if (channel >= 12) 1263 txcalval = 0xAE; 1264 else 1265 txcalval = 0xAF; 1266 1267 return tdme_setsfr_request_sync( 1268 1, 1269 CA8210_SFR_LOTXCAL, 1270 txcalval, 1271 device_ref 1272 ); /* LO Tx Cal */ 1273 } 1274 1275 /** 1276 * tdme_checkpibattribute() - Checks Attribute Values that are not checked in 1277 * MAC 1278 * @pib_attribute: Attribute Number 1279 * @pib_attribute_length: Attribute length 1280 * @pib_attribute_value: Pointer to Attribute Value 1281 * 1282 * Return: 802.15.4 status code of checks 1283 */ 1284 static u8 tdme_checkpibattribute( 1285 u8 pib_attribute, 1286 u8 pib_attribute_length, 1287 const void *pib_attribute_value 1288 ) 1289 { 1290 u8 status = MAC_SUCCESS; 1291 u8 value; 1292 1293 value = *((u8 *)pib_attribute_value); 1294 1295 switch (pib_attribute) { 1296 /* PHY */ 1297 case PHY_TRANSMIT_POWER: 1298 if (value > 0x3F) 1299 status = MAC_INVALID_PARAMETER; 1300 break; 1301 case PHY_CCA_MODE: 1302 if (value > 0x03) 1303 status = MAC_INVALID_PARAMETER; 1304 break; 1305 /* MAC */ 1306 case MAC_BATT_LIFE_EXT_PERIODS: 1307 if (value < 6 || value > 41) 1308 status = MAC_INVALID_PARAMETER; 1309 break; 1310 case MAC_BEACON_PAYLOAD: 1311 if (pib_attribute_length > MAX_BEACON_PAYLOAD_LENGTH) 1312 status = MAC_INVALID_PARAMETER; 1313 break; 1314 case MAC_BEACON_PAYLOAD_LENGTH: 1315 if (value > MAX_BEACON_PAYLOAD_LENGTH) 1316 status = MAC_INVALID_PARAMETER; 1317 break; 1318 case MAC_BEACON_ORDER: 1319 if (value > 15) 1320 status = MAC_INVALID_PARAMETER; 1321 break; 1322 case MAC_MAX_BE: 1323 if (value < 3 || value > 8) 1324 status = MAC_INVALID_PARAMETER; 1325 break; 1326 case MAC_MAX_CSMA_BACKOFFS: 1327 if (value > 5) 1328 status = MAC_INVALID_PARAMETER; 1329 break; 1330 case MAC_MAX_FRAME_RETRIES: 1331 if (value > 7) 1332 status = MAC_INVALID_PARAMETER; 1333 break; 1334 case MAC_MIN_BE: 1335 if (value > 8) 1336 status = MAC_INVALID_PARAMETER; 1337 break; 1338 case MAC_RESPONSE_WAIT_TIME: 1339 if (value < 2 || value > 64) 1340 status = MAC_INVALID_PARAMETER; 1341 break; 1342 case MAC_SUPERFRAME_ORDER: 1343 if (value > 15) 1344 status = MAC_INVALID_PARAMETER; 1345 break; 1346 /* boolean */ 1347 case MAC_ASSOCIATED_PAN_COORD: 1348 case MAC_ASSOCIATION_PERMIT: 1349 case MAC_AUTO_REQUEST: 1350 case MAC_BATT_LIFE_EXT: 1351 case MAC_GTS_PERMIT: 1352 case MAC_PROMISCUOUS_MODE: 1353 case MAC_RX_ON_WHEN_IDLE: 1354 case MAC_SECURITY_ENABLED: 1355 if (value > 1) 1356 status = MAC_INVALID_PARAMETER; 1357 break; 1358 /* MAC SEC */ 1359 case MAC_AUTO_REQUEST_SECURITY_LEVEL: 1360 if (value > 7) 1361 status = MAC_INVALID_PARAMETER; 1362 break; 1363 case MAC_AUTO_REQUEST_KEY_ID_MODE: 1364 if (value > 3) 1365 status = MAC_INVALID_PARAMETER; 1366 break; 1367 default: 1368 break; 1369 } 1370 1371 return status; 1372 } 1373 1374 /** 1375 * tdme_settxpower() - Sets the tx power for MLME_SET phyTransmitPower 1376 * @txp: Transmit Power 1377 * @device_ref: Nondescript pointer to target device 1378 * 1379 * Normalised to 802.15.4 Definition (6-bit, signed): 1380 * Bit 7-6: not used 1381 * Bit 5-0: tx power (-32 - +31 dB) 1382 * 1383 * Return: 802.15.4 status code of api calls 1384 */ 1385 static u8 tdme_settxpower(u8 txp, void *device_ref) 1386 { 1387 u8 status; 1388 s8 txp_val; 1389 u8 txp_ext; 1390 union pa_cfg_sfr pa_cfg_val; 1391 1392 /* extend from 6 to 8 bit */ 1393 txp_ext = 0x3F & txp; 1394 if (txp_ext & 0x20) 1395 txp_ext += 0xC0; 1396 txp_val = (s8)txp_ext; 1397 1398 if (CA8210_MAC_MPW) { 1399 if (txp_val > 0) { 1400 /* 8 dBm: ptrim = 5, itrim = +3 => +4 dBm */ 1401 pa_cfg_val.bias_current_trim = 3; 1402 pa_cfg_val.buffer_capacitor_trim = 5; 1403 pa_cfg_val.boost = 1; 1404 } else { 1405 /* 0 dBm: ptrim = 7, itrim = +3 => -6 dBm */ 1406 pa_cfg_val.bias_current_trim = 3; 1407 pa_cfg_val.buffer_capacitor_trim = 7; 1408 pa_cfg_val.boost = 0; 1409 } 1410 /* write PACFG */ 1411 status = tdme_setsfr_request_sync( 1412 0, 1413 CA8210_SFR_PACFG, 1414 pa_cfg_val.paib, 1415 device_ref 1416 ); 1417 } else { 1418 /* Look-Up Table for Setting Current and Frequency Trim values 1419 * for desired Output Power 1420 */ 1421 if (txp_val > 8) { 1422 pa_cfg_val.paib = 0x3F; 1423 } else if (txp_val == 8) { 1424 pa_cfg_val.paib = 0x32; 1425 } else if (txp_val == 7) { 1426 pa_cfg_val.paib = 0x22; 1427 } else if (txp_val == 6) { 1428 pa_cfg_val.paib = 0x18; 1429 } else if (txp_val == 5) { 1430 pa_cfg_val.paib = 0x10; 1431 } else if (txp_val == 4) { 1432 pa_cfg_val.paib = 0x0C; 1433 } else if (txp_val == 3) { 1434 pa_cfg_val.paib = 0x08; 1435 } else if (txp_val == 2) { 1436 pa_cfg_val.paib = 0x05; 1437 } else if (txp_val == 1) { 1438 pa_cfg_val.paib = 0x03; 1439 } else if (txp_val == 0) { 1440 pa_cfg_val.paib = 0x01; 1441 } else { /* < 0 */ 1442 pa_cfg_val.paib = 0x00; 1443 } 1444 /* write PACFGIB */ 1445 status = tdme_setsfr_request_sync( 1446 0, 1447 CA8210_SFR_PACFGIB, 1448 pa_cfg_val.paib, 1449 device_ref 1450 ); 1451 } 1452 1453 return status; 1454 } 1455 1456 /** 1457 * mcps_data_request() - mcps_data_request (Send Data) according to API Spec 1458 * @src_addr_mode: Source Addressing Mode 1459 * @dst_address_mode: Destination Addressing Mode 1460 * @dst_pan_id: Destination PAN ID 1461 * @dst_addr: Pointer to Destination Address 1462 * @msdu_length: length of Data 1463 * @msdu: Pointer to Data 1464 * @msdu_handle: Handle of Data 1465 * @tx_options: Tx Options Bit Field 1466 * @security: Pointer to Security Structure or NULL 1467 * @device_ref: Nondescript pointer to target device 1468 * 1469 * Return: 802.15.4 status code of action 1470 */ 1471 static u8 mcps_data_request( 1472 u8 src_addr_mode, 1473 u8 dst_address_mode, 1474 u16 dst_pan_id, 1475 union macaddr *dst_addr, 1476 u8 msdu_length, 1477 u8 *msdu, 1478 u8 msdu_handle, 1479 u8 tx_options, 1480 struct secspec *security, 1481 void *device_ref 1482 ) 1483 { 1484 struct secspec *psec; 1485 struct mac_message command; 1486 1487 command.command_id = SPI_MCPS_DATA_REQUEST; 1488 command.pdata.data_req.src_addr_mode = src_addr_mode; 1489 command.pdata.data_req.dst.mode = dst_address_mode; 1490 if (dst_address_mode != MAC_MODE_NO_ADDR) { 1491 command.pdata.data_req.dst.pan_id[0] = LS_BYTE(dst_pan_id); 1492 command.pdata.data_req.dst.pan_id[1] = MS_BYTE(dst_pan_id); 1493 if (dst_address_mode == MAC_MODE_SHORT_ADDR) { 1494 command.pdata.data_req.dst.address[0] = LS_BYTE( 1495 dst_addr->short_address 1496 ); 1497 command.pdata.data_req.dst.address[1] = MS_BYTE( 1498 dst_addr->short_address 1499 ); 1500 } else { /* MAC_MODE_LONG_ADDR*/ 1501 memcpy( 1502 command.pdata.data_req.dst.address, 1503 dst_addr->ieee_address, 1504 8 1505 ); 1506 } 1507 } 1508 command.pdata.data_req.msdu_length = msdu_length; 1509 command.pdata.data_req.msdu_handle = msdu_handle; 1510 command.pdata.data_req.tx_options = tx_options; 1511 memcpy(command.pdata.data_req.msdu, msdu, msdu_length); 1512 psec = (struct secspec *)(command.pdata.data_req.msdu + msdu_length); 1513 command.length = sizeof(struct mcps_data_request_pset) - 1514 MAX_DATA_SIZE + msdu_length; 1515 if (!security || security->security_level == 0) { 1516 psec->security_level = 0; 1517 command.length += 1; 1518 } else { 1519 *psec = *security; 1520 command.length += sizeof(struct secspec); 1521 } 1522 1523 if (ca8210_spi_transfer(device_ref, &command.command_id, 1524 command.length + 2)) 1525 return MAC_SYSTEM_ERROR; 1526 1527 return MAC_SUCCESS; 1528 } 1529 1530 /** 1531 * mlme_reset_request_sync() - MLME_RESET_request/confirm according to API Spec 1532 * @set_default_pib: Set defaults in PIB 1533 * @device_ref: Nondescript pointer to target device 1534 * 1535 * Return: 802.15.4 status code of MLME-RESET.confirm 1536 */ 1537 static u8 mlme_reset_request_sync( 1538 u8 set_default_pib, 1539 void *device_ref 1540 ) 1541 { 1542 u8 status; 1543 struct mac_message command, response; 1544 struct spi_device *spi = device_ref; 1545 1546 command.command_id = SPI_MLME_RESET_REQUEST; 1547 command.length = 1; 1548 command.pdata.u8param = set_default_pib; 1549 1550 if (cascoda_api_downstream( 1551 &command.command_id, 1552 command.length + 2, 1553 &response.command_id, 1554 device_ref)) { 1555 dev_err(&spi->dev, "cascoda_api_downstream failed\n"); 1556 return MAC_SYSTEM_ERROR; 1557 } 1558 1559 if (response.command_id != SPI_MLME_RESET_CONFIRM) 1560 return MAC_SYSTEM_ERROR; 1561 1562 status = response.pdata.status; 1563 1564 /* reset COORD Bit for Channel Filtering as Coordinator */ 1565 if (CA8210_MAC_WORKAROUNDS && set_default_pib && !status) { 1566 status = tdme_setsfr_request_sync( 1567 0, 1568 CA8210_SFR_MACCON, 1569 0, 1570 device_ref 1571 ); 1572 } 1573 1574 return status; 1575 } 1576 1577 /** 1578 * mlme_set_request_sync() - MLME_SET_request/confirm according to API Spec 1579 * @pib_attribute: Attribute Number 1580 * @pib_attribute_index: Index within Attribute if an Array 1581 * @pib_attribute_length: Attribute length 1582 * @pib_attribute_value: Pointer to Attribute Value 1583 * @device_ref: Nondescript pointer to target device 1584 * 1585 * Return: 802.15.4 status code of MLME-SET.confirm 1586 */ 1587 static u8 mlme_set_request_sync( 1588 u8 pib_attribute, 1589 u8 pib_attribute_index, 1590 u8 pib_attribute_length, 1591 const void *pib_attribute_value, 1592 void *device_ref 1593 ) 1594 { 1595 u8 status; 1596 struct mac_message command, response; 1597 1598 /* pre-check the validity of pib_attribute values that are not checked 1599 * in MAC 1600 */ 1601 if (tdme_checkpibattribute( 1602 pib_attribute, pib_attribute_length, pib_attribute_value)) { 1603 return MAC_INVALID_PARAMETER; 1604 } 1605 1606 if (pib_attribute == PHY_CURRENT_CHANNEL) { 1607 status = tdme_channelinit( 1608 *((u8 *)pib_attribute_value), 1609 device_ref 1610 ); 1611 if (status) 1612 return status; 1613 } 1614 1615 if (pib_attribute == PHY_TRANSMIT_POWER) { 1616 return tdme_settxpower( 1617 *((u8 *)pib_attribute_value), 1618 device_ref 1619 ); 1620 } 1621 1622 command.command_id = SPI_MLME_SET_REQUEST; 1623 command.length = sizeof(struct mlme_set_request_pset) - 1624 MAX_ATTRIBUTE_SIZE + pib_attribute_length; 1625 command.pdata.set_req.pib_attribute = pib_attribute; 1626 command.pdata.set_req.pib_attribute_index = pib_attribute_index; 1627 command.pdata.set_req.pib_attribute_length = pib_attribute_length; 1628 memcpy( 1629 command.pdata.set_req.pib_attribute_value, 1630 pib_attribute_value, 1631 pib_attribute_length 1632 ); 1633 1634 if (cascoda_api_downstream( 1635 &command.command_id, 1636 command.length + 2, 1637 &response.command_id, 1638 device_ref)) { 1639 return MAC_SYSTEM_ERROR; 1640 } 1641 1642 if (response.command_id != SPI_MLME_SET_CONFIRM) 1643 return MAC_SYSTEM_ERROR; 1644 1645 return response.pdata.status; 1646 } 1647 1648 /** 1649 * hwme_set_request_sync() - HWME_SET_request/confirm according to API Spec 1650 * @hw_attribute: Attribute Number 1651 * @hw_attribute_length: Attribute length 1652 * @hw_attribute_value: Pointer to Attribute Value 1653 * @device_ref: Nondescript pointer to target device 1654 * 1655 * Return: 802.15.4 status code of HWME-SET.confirm 1656 */ 1657 static u8 hwme_set_request_sync( 1658 u8 hw_attribute, 1659 u8 hw_attribute_length, 1660 u8 *hw_attribute_value, 1661 void *device_ref 1662 ) 1663 { 1664 struct mac_message command, response; 1665 1666 command.command_id = SPI_HWME_SET_REQUEST; 1667 command.length = 2 + hw_attribute_length; 1668 command.pdata.hwme_set_req.hw_attribute = hw_attribute; 1669 command.pdata.hwme_set_req.hw_attribute_length = hw_attribute_length; 1670 memcpy( 1671 command.pdata.hwme_set_req.hw_attribute_value, 1672 hw_attribute_value, 1673 hw_attribute_length 1674 ); 1675 1676 if (cascoda_api_downstream( 1677 &command.command_id, 1678 command.length + 2, 1679 &response.command_id, 1680 device_ref)) { 1681 return MAC_SYSTEM_ERROR; 1682 } 1683 1684 if (response.command_id != SPI_HWME_SET_CONFIRM) 1685 return MAC_SYSTEM_ERROR; 1686 1687 return response.pdata.hwme_set_cnf.status; 1688 } 1689 1690 /** 1691 * hwme_get_request_sync() - HWME_GET_request/confirm according to API Spec 1692 * @hw_attribute: Attribute Number 1693 * @hw_attribute_length: Attribute length 1694 * @hw_attribute_value: Pointer to Attribute Value 1695 * @device_ref: Nondescript pointer to target device 1696 * 1697 * Return: 802.15.4 status code of HWME-GET.confirm 1698 */ 1699 static u8 hwme_get_request_sync( 1700 u8 hw_attribute, 1701 u8 *hw_attribute_length, 1702 u8 *hw_attribute_value, 1703 void *device_ref 1704 ) 1705 { 1706 struct mac_message command, response; 1707 1708 command.command_id = SPI_HWME_GET_REQUEST; 1709 command.length = 1; 1710 command.pdata.hwme_get_req.hw_attribute = hw_attribute; 1711 1712 if (cascoda_api_downstream( 1713 &command.command_id, 1714 command.length + 2, 1715 &response.command_id, 1716 device_ref)) { 1717 return MAC_SYSTEM_ERROR; 1718 } 1719 1720 if (response.command_id != SPI_HWME_GET_CONFIRM) 1721 return MAC_SYSTEM_ERROR; 1722 1723 if (response.pdata.hwme_get_cnf.status == MAC_SUCCESS) { 1724 *hw_attribute_length = 1725 response.pdata.hwme_get_cnf.hw_attribute_length; 1726 memcpy( 1727 hw_attribute_value, 1728 response.pdata.hwme_get_cnf.hw_attribute_value, 1729 *hw_attribute_length 1730 ); 1731 } 1732 1733 return response.pdata.hwme_get_cnf.status; 1734 } 1735 1736 /* Network driver operation */ 1737 1738 /** 1739 * ca8210_async_xmit_complete() - Called to announce that an asynchronous 1740 * transmission has finished 1741 * @hw: ieee802154_hw of ca8210 that has finished exchange 1742 * @msduhandle: Identifier of transmission that has completed 1743 * @status: Returned 802.15.4 status code of the transmission 1744 * 1745 * Return: 0 or linux error code 1746 */ 1747 static int ca8210_async_xmit_complete( 1748 struct ieee802154_hw *hw, 1749 u8 msduhandle, 1750 u8 status) 1751 { 1752 struct ca8210_priv *priv = hw->priv; 1753 1754 if (priv->nextmsduhandle != msduhandle) { 1755 dev_err( 1756 &priv->spi->dev, 1757 "Unexpected msdu_handle on data confirm, Expected %d, got %d\n", 1758 priv->nextmsduhandle, 1759 msduhandle 1760 ); 1761 return -EIO; 1762 } 1763 1764 priv->async_tx_pending = false; 1765 priv->nextmsduhandle++; 1766 1767 if (status) { 1768 dev_err( 1769 &priv->spi->dev, 1770 "Link transmission unsuccessful, status = %d\n", 1771 status 1772 ); 1773 if (status != MAC_TRANSACTION_OVERFLOW) { 1774 dev_kfree_skb_any(priv->tx_skb); 1775 ieee802154_wake_queue(priv->hw); 1776 return 0; 1777 } 1778 } 1779 ieee802154_xmit_complete(priv->hw, priv->tx_skb, true); 1780 1781 return 0; 1782 } 1783 1784 /** 1785 * ca8210_skb_rx() - Contructs a properly framed socket buffer from a received 1786 * MCPS_DATA_indication 1787 * @hw: ieee802154_hw that MCPS_DATA_indication was received by 1788 * @len: length of MCPS_DATA_indication 1789 * @data_ind: Octet array of MCPS_DATA_indication 1790 * 1791 * Called by the spi driver whenever a SAP command is received, this function 1792 * will ascertain whether the command is of interest to the network driver and 1793 * take necessary action. 1794 * 1795 * Return: 0 or linux error code 1796 */ 1797 static int ca8210_skb_rx( 1798 struct ieee802154_hw *hw, 1799 size_t len, 1800 u8 *data_ind 1801 ) 1802 { 1803 struct ieee802154_hdr hdr; 1804 int msdulen; 1805 int hlen; 1806 u8 mpdulinkquality = data_ind[23]; 1807 struct sk_buff *skb; 1808 struct ca8210_priv *priv = hw->priv; 1809 1810 /* Allocate mtu size buffer for every rx packet */ 1811 skb = dev_alloc_skb(IEEE802154_MTU + sizeof(hdr)); 1812 if (!skb) 1813 return -ENOMEM; 1814 1815 skb_reserve(skb, sizeof(hdr)); 1816 1817 msdulen = data_ind[22]; /* msdu_length */ 1818 if (msdulen > IEEE802154_MTU) { 1819 dev_err( 1820 &priv->spi->dev, 1821 "received erroneously large msdu length!\n" 1822 ); 1823 kfree_skb(skb); 1824 return -EMSGSIZE; 1825 } 1826 dev_dbg(&priv->spi->dev, "skb buffer length = %d\n", msdulen); 1827 1828 if (priv->promiscuous) 1829 goto copy_payload; 1830 1831 /* Populate hdr */ 1832 hdr.sec.level = data_ind[29 + msdulen]; 1833 dev_dbg(&priv->spi->dev, "security level: %#03x\n", hdr.sec.level); 1834 if (hdr.sec.level > 0) { 1835 hdr.sec.key_id_mode = data_ind[30 + msdulen]; 1836 memcpy(&hdr.sec.extended_src, &data_ind[31 + msdulen], 8); 1837 hdr.sec.key_id = data_ind[39 + msdulen]; 1838 } 1839 hdr.source.mode = data_ind[0]; 1840 dev_dbg(&priv->spi->dev, "srcAddrMode: %#03x\n", hdr.source.mode); 1841 hdr.source.pan_id = *(u16 *)&data_ind[1]; 1842 dev_dbg(&priv->spi->dev, "srcPanId: %#06x\n", hdr.source.pan_id); 1843 memcpy(&hdr.source.extended_addr, &data_ind[3], 8); 1844 hdr.dest.mode = data_ind[11]; 1845 dev_dbg(&priv->spi->dev, "dstAddrMode: %#03x\n", hdr.dest.mode); 1846 hdr.dest.pan_id = *(u16 *)&data_ind[12]; 1847 dev_dbg(&priv->spi->dev, "dstPanId: %#06x\n", hdr.dest.pan_id); 1848 memcpy(&hdr.dest.extended_addr, &data_ind[14], 8); 1849 1850 /* Fill in FC implicitly */ 1851 hdr.fc.type = 1; /* Data frame */ 1852 if (hdr.sec.level) 1853 hdr.fc.security_enabled = 1; 1854 else 1855 hdr.fc.security_enabled = 0; 1856 if (data_ind[1] != data_ind[12] || data_ind[2] != data_ind[13]) 1857 hdr.fc.intra_pan = 1; 1858 else 1859 hdr.fc.intra_pan = 0; 1860 hdr.fc.dest_addr_mode = hdr.dest.mode; 1861 hdr.fc.source_addr_mode = hdr.source.mode; 1862 1863 /* Add hdr to front of buffer */ 1864 hlen = ieee802154_hdr_push(skb, &hdr); 1865 1866 if (hlen < 0) { 1867 dev_crit(&priv->spi->dev, "failed to push mac hdr onto skb!\n"); 1868 kfree_skb(skb); 1869 return hlen; 1870 } 1871 1872 skb_reset_mac_header(skb); 1873 skb->mac_len = hlen; 1874 1875 copy_payload: 1876 /* Add <msdulen> bytes of space to the back of the buffer */ 1877 /* Copy msdu to skb */ 1878 skb_put_data(skb, &data_ind[29], msdulen); 1879 1880 ieee802154_rx_irqsafe(hw, skb, mpdulinkquality); 1881 return 0; 1882 } 1883 1884 /** 1885 * ca8210_net_rx() - Acts upon received SAP commands relevant to the network 1886 * driver 1887 * @hw: ieee802154_hw that command was received by 1888 * @command: Octet array of received command 1889 * @len: length of the received command 1890 * 1891 * Called by the spi driver whenever a SAP command is received, this function 1892 * will ascertain whether the command is of interest to the network driver and 1893 * take necessary action. 1894 * 1895 * Return: 0 or linux error code 1896 */ 1897 static int ca8210_net_rx(struct ieee802154_hw *hw, u8 *command, size_t len) 1898 { 1899 struct ca8210_priv *priv = hw->priv; 1900 unsigned long flags; 1901 u8 status; 1902 1903 dev_dbg(&priv->spi->dev, "%s: CmdID = %d\n", __func__, command[0]); 1904 1905 if (command[0] == SPI_MCPS_DATA_INDICATION) { 1906 /* Received data */ 1907 spin_lock_irqsave(&priv->lock, flags); 1908 if (command[26] == priv->last_dsn) { 1909 dev_dbg( 1910 &priv->spi->dev, 1911 "DSN %d resend received, ignoring...\n", 1912 command[26] 1913 ); 1914 spin_unlock_irqrestore(&priv->lock, flags); 1915 return 0; 1916 } 1917 priv->last_dsn = command[26]; 1918 spin_unlock_irqrestore(&priv->lock, flags); 1919 return ca8210_skb_rx(hw, len - 2, command + 2); 1920 } else if (command[0] == SPI_MCPS_DATA_CONFIRM) { 1921 status = command[3]; 1922 if (priv->async_tx_pending) { 1923 return ca8210_async_xmit_complete( 1924 hw, 1925 command[2], 1926 status 1927 ); 1928 } 1929 } 1930 1931 return 0; 1932 } 1933 1934 /** 1935 * ca8210_skb_tx() - Transmits a given socket buffer using the ca8210 1936 * @skb: Socket buffer to transmit 1937 * @msduhandle: Data identifier to pass to the 802.15.4 MAC 1938 * @priv: Pointer to private data section of target ca8210 1939 * 1940 * Return: 0 or linux error code 1941 */ 1942 static int ca8210_skb_tx( 1943 struct sk_buff *skb, 1944 u8 msduhandle, 1945 struct ca8210_priv *priv 1946 ) 1947 { 1948 int status; 1949 struct ieee802154_hdr header = { }; 1950 struct secspec secspec; 1951 unsigned int mac_len; 1952 1953 dev_dbg(&priv->spi->dev, "%s called\n", __func__); 1954 1955 /* Get addressing info from skb - ieee802154 layer creates a full 1956 * packet 1957 */ 1958 mac_len = ieee802154_hdr_peek_addrs(skb, &header); 1959 1960 secspec.security_level = header.sec.level; 1961 secspec.key_id_mode = header.sec.key_id_mode; 1962 if (secspec.key_id_mode == 2) 1963 memcpy(secspec.key_source, &header.sec.short_src, 4); 1964 else if (secspec.key_id_mode == 3) 1965 memcpy(secspec.key_source, &header.sec.extended_src, 8); 1966 secspec.key_index = header.sec.key_id; 1967 1968 /* Pass to Cascoda API */ 1969 status = mcps_data_request( 1970 header.source.mode, 1971 header.dest.mode, 1972 header.dest.pan_id, 1973 (union macaddr *)&header.dest.extended_addr, 1974 skb->len - mac_len, 1975 &skb->data[mac_len], 1976 msduhandle, 1977 header.fc.ack_request, 1978 &secspec, 1979 priv->spi 1980 ); 1981 return link_to_linux_err(status); 1982 } 1983 1984 /** 1985 * ca8210_start() - Starts the network driver 1986 * @hw: ieee802154_hw of ca8210 being started 1987 * 1988 * Return: 0 or linux error code 1989 */ 1990 static int ca8210_start(struct ieee802154_hw *hw) 1991 { 1992 int status; 1993 u8 rx_on_when_idle; 1994 u8 lqi_threshold = 0; 1995 struct ca8210_priv *priv = hw->priv; 1996 1997 priv->last_dsn = -1; 1998 /* Turn receiver on when idle for now just to test rx */ 1999 rx_on_when_idle = 1; 2000 status = mlme_set_request_sync( 2001 MAC_RX_ON_WHEN_IDLE, 2002 0, 2003 1, 2004 &rx_on_when_idle, 2005 priv->spi 2006 ); 2007 if (status) { 2008 dev_crit( 2009 &priv->spi->dev, 2010 "Setting rx_on_when_idle failed, status = %d\n", 2011 status 2012 ); 2013 return link_to_linux_err(status); 2014 } 2015 status = hwme_set_request_sync( 2016 HWME_LQILIMIT, 2017 1, 2018 &lqi_threshold, 2019 priv->spi 2020 ); 2021 if (status) { 2022 dev_crit( 2023 &priv->spi->dev, 2024 "Setting lqilimit failed, status = %d\n", 2025 status 2026 ); 2027 return link_to_linux_err(status); 2028 } 2029 2030 return 0; 2031 } 2032 2033 /** 2034 * ca8210_stop() - Stops the network driver 2035 * @hw: ieee802154_hw of ca8210 being stopped 2036 * 2037 * Return: 0 or linux error code 2038 */ 2039 static void ca8210_stop(struct ieee802154_hw *hw) 2040 { 2041 } 2042 2043 /** 2044 * ca8210_xmit_async() - Asynchronously transmits a given socket buffer using 2045 * the ca8210 2046 * @hw: ieee802154_hw of ca8210 to transmit from 2047 * @skb: Socket buffer to transmit 2048 * 2049 * Return: 0 or linux error code 2050 */ 2051 static int ca8210_xmit_async(struct ieee802154_hw *hw, struct sk_buff *skb) 2052 { 2053 struct ca8210_priv *priv = hw->priv; 2054 int status; 2055 2056 dev_dbg(&priv->spi->dev, "calling %s\n", __func__); 2057 2058 priv->tx_skb = skb; 2059 priv->async_tx_pending = true; 2060 status = ca8210_skb_tx(skb, priv->nextmsduhandle, priv); 2061 return status; 2062 } 2063 2064 /** 2065 * ca8210_get_ed() - Returns the measured energy on the current channel at this 2066 * instant in time 2067 * @hw: ieee802154_hw of target ca8210 2068 * @level: Measured Energy Detect level 2069 * 2070 * Return: 0 or linux error code 2071 */ 2072 static int ca8210_get_ed(struct ieee802154_hw *hw, u8 *level) 2073 { 2074 u8 lenvar; 2075 struct ca8210_priv *priv = hw->priv; 2076 2077 return link_to_linux_err( 2078 hwme_get_request_sync(HWME_EDVALUE, &lenvar, level, priv->spi) 2079 ); 2080 } 2081 2082 /** 2083 * ca8210_set_channel() - Sets the current operating 802.15.4 channel of the 2084 * ca8210 2085 * @hw: ieee802154_hw of target ca8210 2086 * @page: Channel page to set 2087 * @channel: Channel number to set 2088 * 2089 * Return: 0 or linux error code 2090 */ 2091 static int ca8210_set_channel( 2092 struct ieee802154_hw *hw, 2093 u8 page, 2094 u8 channel 2095 ) 2096 { 2097 u8 status; 2098 struct ca8210_priv *priv = hw->priv; 2099 2100 status = mlme_set_request_sync( 2101 PHY_CURRENT_CHANNEL, 2102 0, 2103 1, 2104 &channel, 2105 priv->spi 2106 ); 2107 if (status) { 2108 dev_err( 2109 &priv->spi->dev, 2110 "error setting channel, MLME-SET.confirm status = %d\n", 2111 status 2112 ); 2113 } 2114 return link_to_linux_err(status); 2115 } 2116 2117 /** 2118 * ca8210_set_hw_addr_filt() - Sets the address filtering parameters of the 2119 * ca8210 2120 * @hw: ieee802154_hw of target ca8210 2121 * @filt: Filtering parameters 2122 * @changed: Bitmap representing which parameters to change 2123 * 2124 * Effectively just sets the actual addressing information identifying this node 2125 * as all filtering is performed by the ca8210 as detailed in the IEEE 802.15.4 2126 * 2006 specification. 2127 * 2128 * Return: 0 or linux error code 2129 */ 2130 static int ca8210_set_hw_addr_filt( 2131 struct ieee802154_hw *hw, 2132 struct ieee802154_hw_addr_filt *filt, 2133 unsigned long changed 2134 ) 2135 { 2136 u8 status = 0; 2137 struct ca8210_priv *priv = hw->priv; 2138 2139 if (changed & IEEE802154_AFILT_PANID_CHANGED) { 2140 status = mlme_set_request_sync( 2141 MAC_PAN_ID, 2142 0, 2143 2, 2144 &filt->pan_id, priv->spi 2145 ); 2146 if (status) { 2147 dev_err( 2148 &priv->spi->dev, 2149 "error setting pan id, MLME-SET.confirm status = %d", 2150 status 2151 ); 2152 return link_to_linux_err(status); 2153 } 2154 } 2155 if (changed & IEEE802154_AFILT_SADDR_CHANGED) { 2156 status = mlme_set_request_sync( 2157 MAC_SHORT_ADDRESS, 2158 0, 2159 2, 2160 &filt->short_addr, priv->spi 2161 ); 2162 if (status) { 2163 dev_err( 2164 &priv->spi->dev, 2165 "error setting short address, MLME-SET.confirm status = %d", 2166 status 2167 ); 2168 return link_to_linux_err(status); 2169 } 2170 } 2171 if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) { 2172 status = mlme_set_request_sync( 2173 NS_IEEE_ADDRESS, 2174 0, 2175 8, 2176 &filt->ieee_addr, 2177 priv->spi 2178 ); 2179 if (status) { 2180 dev_err( 2181 &priv->spi->dev, 2182 "error setting ieee address, MLME-SET.confirm status = %d", 2183 status 2184 ); 2185 return link_to_linux_err(status); 2186 } 2187 } 2188 /* TODO: Should use MLME_START to set coord bit? */ 2189 return 0; 2190 } 2191 2192 /** 2193 * ca8210_set_tx_power() - Sets the transmit power of the ca8210 2194 * @hw: ieee802154_hw of target ca8210 2195 * @mbm: Transmit power in mBm (dBm*100) 2196 * 2197 * Return: 0 or linux error code 2198 */ 2199 static int ca8210_set_tx_power(struct ieee802154_hw *hw, s32 mbm) 2200 { 2201 struct ca8210_priv *priv = hw->priv; 2202 2203 mbm /= 100; 2204 return link_to_linux_err( 2205 mlme_set_request_sync(PHY_TRANSMIT_POWER, 0, 1, &mbm, priv->spi) 2206 ); 2207 } 2208 2209 /** 2210 * ca8210_set_cca_mode() - Sets the clear channel assessment mode of the ca8210 2211 * @hw: ieee802154_hw of target ca8210 2212 * @cca: CCA mode to set 2213 * 2214 * Return: 0 or linux error code 2215 */ 2216 static int ca8210_set_cca_mode( 2217 struct ieee802154_hw *hw, 2218 const struct wpan_phy_cca *cca 2219 ) 2220 { 2221 u8 status; 2222 u8 cca_mode; 2223 struct ca8210_priv *priv = hw->priv; 2224 2225 cca_mode = cca->mode & 3; 2226 if (cca_mode == 3 && cca->opt == NL802154_CCA_OPT_ENERGY_CARRIER_OR) { 2227 /* cca_mode 0 == CS OR ED, 3 == CS AND ED */ 2228 cca_mode = 0; 2229 } 2230 status = mlme_set_request_sync( 2231 PHY_CCA_MODE, 2232 0, 2233 1, 2234 &cca_mode, 2235 priv->spi 2236 ); 2237 if (status) { 2238 dev_err( 2239 &priv->spi->dev, 2240 "error setting cca mode, MLME-SET.confirm status = %d", 2241 status 2242 ); 2243 } 2244 return link_to_linux_err(status); 2245 } 2246 2247 /** 2248 * ca8210_set_cca_ed_level() - Sets the CCA ED level of the ca8210 2249 * @hw: ieee802154_hw of target ca8210 2250 * @level: ED level to set (in mbm) 2251 * 2252 * Sets the minimum threshold of measured energy above which the ca8210 will 2253 * back off and retry a transmission. 2254 * 2255 * Return: 0 or linux error code 2256 */ 2257 static int ca8210_set_cca_ed_level(struct ieee802154_hw *hw, s32 level) 2258 { 2259 u8 status; 2260 u8 ed_threshold = (level / 100) * 2 + 256; 2261 struct ca8210_priv *priv = hw->priv; 2262 2263 status = hwme_set_request_sync( 2264 HWME_EDTHRESHOLD, 2265 1, 2266 &ed_threshold, 2267 priv->spi 2268 ); 2269 if (status) { 2270 dev_err( 2271 &priv->spi->dev, 2272 "error setting ed threshold, HWME-SET.confirm status = %d", 2273 status 2274 ); 2275 } 2276 return link_to_linux_err(status); 2277 } 2278 2279 /** 2280 * ca8210_set_csma_params() - Sets the CSMA parameters of the ca8210 2281 * @hw: ieee802154_hw of target ca8210 2282 * @min_be: Minimum backoff exponent when backing off a transmission 2283 * @max_be: Maximum backoff exponent when backing off a transmission 2284 * @retries: Number of times to retry after backing off 2285 * 2286 * Return: 0 or linux error code 2287 */ 2288 static int ca8210_set_csma_params( 2289 struct ieee802154_hw *hw, 2290 u8 min_be, 2291 u8 max_be, 2292 u8 retries 2293 ) 2294 { 2295 u8 status; 2296 struct ca8210_priv *priv = hw->priv; 2297 2298 status = mlme_set_request_sync(MAC_MIN_BE, 0, 1, &min_be, priv->spi); 2299 if (status) { 2300 dev_err( 2301 &priv->spi->dev, 2302 "error setting min be, MLME-SET.confirm status = %d", 2303 status 2304 ); 2305 return link_to_linux_err(status); 2306 } 2307 status = mlme_set_request_sync(MAC_MAX_BE, 0, 1, &max_be, priv->spi); 2308 if (status) { 2309 dev_err( 2310 &priv->spi->dev, 2311 "error setting max be, MLME-SET.confirm status = %d", 2312 status 2313 ); 2314 return link_to_linux_err(status); 2315 } 2316 status = mlme_set_request_sync( 2317 MAC_MAX_CSMA_BACKOFFS, 2318 0, 2319 1, 2320 &retries, 2321 priv->spi 2322 ); 2323 if (status) { 2324 dev_err( 2325 &priv->spi->dev, 2326 "error setting max csma backoffs, MLME-SET.confirm status = %d", 2327 status 2328 ); 2329 } 2330 return link_to_linux_err(status); 2331 } 2332 2333 /** 2334 * ca8210_set_frame_retries() - Sets the maximum frame retries of the ca8210 2335 * @hw: ieee802154_hw of target ca8210 2336 * @retries: Number of retries 2337 * 2338 * Sets the number of times to retry a transmission if no acknowledgment was 2339 * was received from the other end when one was requested. 2340 * 2341 * Return: 0 or linux error code 2342 */ 2343 static int ca8210_set_frame_retries(struct ieee802154_hw *hw, s8 retries) 2344 { 2345 u8 status; 2346 struct ca8210_priv *priv = hw->priv; 2347 2348 status = mlme_set_request_sync( 2349 MAC_MAX_FRAME_RETRIES, 2350 0, 2351 1, 2352 &retries, 2353 priv->spi 2354 ); 2355 if (status) { 2356 dev_err( 2357 &priv->spi->dev, 2358 "error setting frame retries, MLME-SET.confirm status = %d", 2359 status 2360 ); 2361 } 2362 return link_to_linux_err(status); 2363 } 2364 2365 static int ca8210_set_promiscuous_mode(struct ieee802154_hw *hw, const bool on) 2366 { 2367 u8 status; 2368 struct ca8210_priv *priv = hw->priv; 2369 2370 status = mlme_set_request_sync( 2371 MAC_PROMISCUOUS_MODE, 2372 0, 2373 1, 2374 (const void *)&on, 2375 priv->spi 2376 ); 2377 if (status) { 2378 dev_err( 2379 &priv->spi->dev, 2380 "error setting promiscuous mode, MLME-SET.confirm status = %d", 2381 status 2382 ); 2383 } else { 2384 priv->promiscuous = on; 2385 } 2386 return link_to_linux_err(status); 2387 } 2388 2389 static const struct ieee802154_ops ca8210_phy_ops = { 2390 .start = ca8210_start, 2391 .stop = ca8210_stop, 2392 .xmit_async = ca8210_xmit_async, 2393 .ed = ca8210_get_ed, 2394 .set_channel = ca8210_set_channel, 2395 .set_hw_addr_filt = ca8210_set_hw_addr_filt, 2396 .set_txpower = ca8210_set_tx_power, 2397 .set_cca_mode = ca8210_set_cca_mode, 2398 .set_cca_ed_level = ca8210_set_cca_ed_level, 2399 .set_csma_params = ca8210_set_csma_params, 2400 .set_frame_retries = ca8210_set_frame_retries, 2401 .set_promiscuous_mode = ca8210_set_promiscuous_mode 2402 }; 2403 2404 /* Test/EVBME Interface */ 2405 2406 /** 2407 * ca8210_test_int_open() - Opens the test interface to the userspace 2408 * @inodp: inode representation of file interface 2409 * @filp: file interface 2410 * 2411 * Return: 0 or linux error code 2412 */ 2413 static int ca8210_test_int_open(struct inode *inodp, struct file *filp) 2414 { 2415 struct ca8210_priv *priv = inodp->i_private; 2416 2417 filp->private_data = priv; 2418 return 0; 2419 } 2420 2421 /** 2422 * ca8210_test_check_upstream() - Checks a command received from the upstream 2423 * testing interface for required action 2424 * @buf: Buffer containing command to check 2425 * @device_ref: Nondescript pointer to target device 2426 * 2427 * Return: 0 or linux error code 2428 */ 2429 static int ca8210_test_check_upstream(u8 *buf, void *device_ref) 2430 { 2431 int ret; 2432 u8 response[CA8210_SPI_BUF_SIZE]; 2433 2434 if (buf[0] == SPI_MLME_SET_REQUEST) { 2435 ret = tdme_checkpibattribute(buf[2], buf[4], buf + 5); 2436 if (ret) { 2437 response[0] = SPI_MLME_SET_CONFIRM; 2438 response[1] = 3; 2439 response[2] = MAC_INVALID_PARAMETER; 2440 response[3] = buf[2]; 2441 response[4] = buf[3]; 2442 if (cascoda_api_upstream) 2443 cascoda_api_upstream(response, 5, device_ref); 2444 return ret; 2445 } 2446 } 2447 if (buf[0] == SPI_MLME_ASSOCIATE_REQUEST) { 2448 return tdme_channelinit(buf[2], device_ref); 2449 } else if (buf[0] == SPI_MLME_START_REQUEST) { 2450 return tdme_channelinit(buf[4], device_ref); 2451 } else if ( 2452 (buf[0] == SPI_MLME_SET_REQUEST) && 2453 (buf[2] == PHY_CURRENT_CHANNEL) 2454 ) { 2455 return tdme_channelinit(buf[5], device_ref); 2456 } else if ( 2457 (buf[0] == SPI_TDME_SET_REQUEST) && 2458 (buf[2] == TDME_CHANNEL) 2459 ) { 2460 return tdme_channelinit(buf[4], device_ref); 2461 } else if ( 2462 (CA8210_MAC_WORKAROUNDS) && 2463 (buf[0] == SPI_MLME_RESET_REQUEST) && 2464 (buf[2] == 1) 2465 ) { 2466 /* reset COORD Bit for Channel Filtering as Coordinator */ 2467 return tdme_setsfr_request_sync( 2468 0, 2469 CA8210_SFR_MACCON, 2470 0, 2471 device_ref 2472 ); 2473 } 2474 return 0; 2475 } /* End of EVBMECheckSerialCommand() */ 2476 2477 /** 2478 * ca8210_test_int_user_write() - Called by a process in userspace to send a 2479 * message to the ca8210 drivers 2480 * @filp: file interface 2481 * @in_buf: Buffer containing message to write 2482 * @len: length of message 2483 * @off: file offset 2484 * 2485 * Return: 0 or linux error code 2486 */ 2487 static ssize_t ca8210_test_int_user_write( 2488 struct file *filp, 2489 const char __user *in_buf, 2490 size_t len, 2491 loff_t *off 2492 ) 2493 { 2494 int ret; 2495 struct ca8210_priv *priv = filp->private_data; 2496 u8 command[CA8210_SPI_BUF_SIZE]; 2497 2498 memset(command, SPI_IDLE, 6); 2499 if (len > CA8210_SPI_BUF_SIZE || len < 2) { 2500 dev_warn( 2501 &priv->spi->dev, 2502 "userspace requested erroneous write length (%zu)\n", 2503 len 2504 ); 2505 return -EBADE; 2506 } 2507 2508 ret = copy_from_user(command, in_buf, len); 2509 if (ret) { 2510 dev_err( 2511 &priv->spi->dev, 2512 "%d bytes could not be copied from userspace\n", 2513 ret 2514 ); 2515 return -EIO; 2516 } 2517 if (len != command[1] + 2) { 2518 dev_err( 2519 &priv->spi->dev, 2520 "write len does not match packet length field\n" 2521 ); 2522 return -EBADE; 2523 } 2524 2525 ret = ca8210_test_check_upstream(command, priv->spi); 2526 if (ret == 0) { 2527 ret = ca8210_spi_exchange( 2528 command, 2529 command[1] + 2, 2530 NULL, 2531 priv->spi 2532 ); 2533 if (ret < 0) { 2534 /* effectively 0 bytes were written successfully */ 2535 dev_err( 2536 &priv->spi->dev, 2537 "spi exchange failed\n" 2538 ); 2539 return ret; 2540 } 2541 if (command[0] & SPI_SYN) 2542 priv->sync_down++; 2543 } 2544 2545 return len; 2546 } 2547 2548 /** 2549 * ca8210_test_int_user_read() - Called by a process in userspace to read a 2550 * message from the ca8210 drivers 2551 * @filp: file interface 2552 * @buf: Buffer to write message to 2553 * @len: length of message to read (ignored) 2554 * @offp: file offset 2555 * 2556 * If the O_NONBLOCK flag was set when opening the file then this function will 2557 * not block, i.e. it will return if the fifo is empty. Otherwise the function 2558 * will block, i.e. wait until new data arrives. 2559 * 2560 * Return: number of bytes read 2561 */ 2562 static ssize_t ca8210_test_int_user_read( 2563 struct file *filp, 2564 char __user *buf, 2565 size_t len, 2566 loff_t *offp 2567 ) 2568 { 2569 int i, cmdlen; 2570 struct ca8210_priv *priv = filp->private_data; 2571 unsigned char *fifo_buffer; 2572 unsigned long bytes_not_copied; 2573 2574 if (filp->f_flags & O_NONBLOCK) { 2575 /* Non-blocking mode */ 2576 if (kfifo_is_empty(&priv->test.up_fifo)) 2577 return 0; 2578 } else { 2579 /* Blocking mode */ 2580 wait_event_interruptible( 2581 priv->test.readq, 2582 !kfifo_is_empty(&priv->test.up_fifo) 2583 ); 2584 } 2585 2586 if (kfifo_out(&priv->test.up_fifo, &fifo_buffer, 4) != 4) { 2587 dev_err( 2588 &priv->spi->dev, 2589 "test_interface: Wrong number of elements popped from upstream fifo\n" 2590 ); 2591 return 0; 2592 } 2593 cmdlen = fifo_buffer[1]; 2594 bytes_not_copied = cmdlen + 2; 2595 2596 bytes_not_copied = copy_to_user(buf, fifo_buffer, bytes_not_copied); 2597 if (bytes_not_copied > 0) { 2598 dev_err( 2599 &priv->spi->dev, 2600 "%lu bytes could not be copied to user space!\n", 2601 bytes_not_copied 2602 ); 2603 } 2604 2605 dev_dbg(&priv->spi->dev, "test_interface: Cmd len = %d\n", cmdlen); 2606 2607 dev_dbg(&priv->spi->dev, "test_interface: Read\n"); 2608 for (i = 0; i < cmdlen + 2; i++) 2609 dev_dbg(&priv->spi->dev, "%#03x\n", fifo_buffer[i]); 2610 2611 kfree(fifo_buffer); 2612 2613 return cmdlen + 2; 2614 } 2615 2616 /** 2617 * ca8210_test_int_ioctl() - Called by a process in userspace to enact an 2618 * arbitrary action 2619 * @filp: file interface 2620 * @ioctl_num: which action to enact 2621 * @ioctl_param: arbitrary parameter for the action 2622 * 2623 * Return: status 2624 */ 2625 static long ca8210_test_int_ioctl( 2626 struct file *filp, 2627 unsigned int ioctl_num, 2628 unsigned long ioctl_param 2629 ) 2630 { 2631 struct ca8210_priv *priv = filp->private_data; 2632 2633 switch (ioctl_num) { 2634 case CA8210_IOCTL_HARD_RESET: 2635 ca8210_reset_send(priv->spi, ioctl_param); 2636 break; 2637 default: 2638 break; 2639 } 2640 return 0; 2641 } 2642 2643 /** 2644 * ca8210_test_int_poll() - Called by a process in userspace to determine which 2645 * actions are currently possible for the file 2646 * @filp: file interface 2647 * @ptable: poll table 2648 * 2649 * Return: set of poll return flags 2650 */ 2651 static __poll_t ca8210_test_int_poll( 2652 struct file *filp, 2653 struct poll_table_struct *ptable 2654 ) 2655 { 2656 __poll_t return_flags = 0; 2657 struct ca8210_priv *priv = filp->private_data; 2658 2659 poll_wait(filp, &priv->test.readq, ptable); 2660 if (!kfifo_is_empty(&priv->test.up_fifo)) 2661 return_flags |= (EPOLLIN | EPOLLRDNORM); 2662 if (wait_event_interruptible( 2663 priv->test.readq, 2664 !kfifo_is_empty(&priv->test.up_fifo))) { 2665 return EPOLLERR; 2666 } 2667 return return_flags; 2668 } 2669 2670 static const struct file_operations test_int_fops = { 2671 .read = ca8210_test_int_user_read, 2672 .write = ca8210_test_int_user_write, 2673 .open = ca8210_test_int_open, 2674 .release = NULL, 2675 .unlocked_ioctl = ca8210_test_int_ioctl, 2676 .poll = ca8210_test_int_poll 2677 }; 2678 2679 /* Init/Deinit */ 2680 2681 /** 2682 * ca8210_get_platform_data() - Populate a ca8210_platform_data object 2683 * @spi_device: Pointer to ca8210 spi device object to get data for 2684 * @pdata: Pointer to ca8210_platform_data object to populate 2685 * 2686 * Return: 0 or linux error code 2687 */ 2688 static int ca8210_get_platform_data( 2689 struct spi_device *spi_device, 2690 struct ca8210_platform_data *pdata 2691 ) 2692 { 2693 int ret = 0; 2694 2695 if (!spi_device->dev.of_node) 2696 return -EINVAL; 2697 2698 pdata->extclockenable = of_property_read_bool( 2699 spi_device->dev.of_node, 2700 "extclock-enable" 2701 ); 2702 if (pdata->extclockenable) { 2703 ret = of_property_read_u32( 2704 spi_device->dev.of_node, 2705 "extclock-freq", 2706 &pdata->extclockfreq 2707 ); 2708 if (ret < 0) 2709 return ret; 2710 2711 ret = of_property_read_u32( 2712 spi_device->dev.of_node, 2713 "extclock-gpio", 2714 &pdata->extclockgpio 2715 ); 2716 } 2717 2718 return ret; 2719 } 2720 2721 /** 2722 * ca8210_config_extern_clk() - Configure the external clock provided by the 2723 * ca8210 2724 * @pdata: Pointer to ca8210_platform_data containing clock parameters 2725 * @spi: Pointer to target ca8210 spi device 2726 * @on: True to turn the clock on, false to turn off 2727 * 2728 * The external clock is configured with a frequency and output pin taken from 2729 * the platform data. 2730 * 2731 * Return: 0 or linux error code 2732 */ 2733 static int ca8210_config_extern_clk( 2734 struct ca8210_platform_data *pdata, 2735 struct spi_device *spi, 2736 bool on 2737 ) 2738 { 2739 u8 clkparam[2]; 2740 2741 if (on) { 2742 dev_info(&spi->dev, "Switching external clock on\n"); 2743 switch (pdata->extclockfreq) { 2744 case SIXTEEN_MHZ: 2745 clkparam[0] = 1; 2746 break; 2747 case EIGHT_MHZ: 2748 clkparam[0] = 2; 2749 break; 2750 case FOUR_MHZ: 2751 clkparam[0] = 3; 2752 break; 2753 case TWO_MHZ: 2754 clkparam[0] = 4; 2755 break; 2756 case ONE_MHZ: 2757 clkparam[0] = 5; 2758 break; 2759 default: 2760 dev_crit(&spi->dev, "Invalid extclock-freq\n"); 2761 return -EINVAL; 2762 } 2763 clkparam[1] = pdata->extclockgpio; 2764 } else { 2765 dev_info(&spi->dev, "Switching external clock off\n"); 2766 clkparam[0] = 0; /* off */ 2767 clkparam[1] = 0; 2768 } 2769 return link_to_linux_err( 2770 hwme_set_request_sync(HWME_SYSCLKOUT, 2, clkparam, spi) 2771 ); 2772 } 2773 2774 /** 2775 * ca8210_register_ext_clock() - Register ca8210's external clock with kernel 2776 * @spi: Pointer to target ca8210 spi device 2777 * 2778 * Return: 0 or linux error code 2779 */ 2780 static int ca8210_register_ext_clock(struct spi_device *spi) 2781 { 2782 struct device_node *np = spi->dev.of_node; 2783 struct ca8210_priv *priv = spi_get_drvdata(spi); 2784 struct ca8210_platform_data *pdata = spi->dev.platform_data; 2785 int ret = 0; 2786 2787 if (!np) 2788 return -EFAULT; 2789 2790 priv->clk = clk_register_fixed_rate( 2791 &spi->dev, 2792 np->name, 2793 NULL, 2794 0, 2795 pdata->extclockfreq 2796 ); 2797 2798 if (IS_ERR(priv->clk)) { 2799 dev_crit(&spi->dev, "Failed to register external clk\n"); 2800 return PTR_ERR(priv->clk); 2801 } 2802 ret = of_clk_add_provider(np, of_clk_src_simple_get, priv->clk); 2803 if (ret) { 2804 clk_unregister(priv->clk); 2805 dev_crit( 2806 &spi->dev, 2807 "Failed to register external clock as clock provider\n" 2808 ); 2809 } else { 2810 dev_info(&spi->dev, "External clock set as clock provider\n"); 2811 } 2812 2813 return ret; 2814 } 2815 2816 /** 2817 * ca8210_unregister_ext_clock() - Unregister ca8210's external clock with 2818 * kernel 2819 * @spi: Pointer to target ca8210 spi device 2820 */ 2821 static void ca8210_unregister_ext_clock(struct spi_device *spi) 2822 { 2823 struct ca8210_priv *priv = spi_get_drvdata(spi); 2824 2825 if (!priv->clk) 2826 return 2827 2828 of_clk_del_provider(spi->dev.of_node); 2829 clk_unregister(priv->clk); 2830 dev_info(&spi->dev, "External clock unregistered\n"); 2831 } 2832 2833 /** 2834 * ca8210_reset_init() - Initialise the reset input to the ca8210 2835 * @spi: Pointer to target ca8210 spi device 2836 * 2837 * Return: 0 or linux error code 2838 */ 2839 static int ca8210_reset_init(struct spi_device *spi) 2840 { 2841 int ret; 2842 struct ca8210_platform_data *pdata = spi->dev.platform_data; 2843 2844 pdata->gpio_reset = of_get_named_gpio( 2845 spi->dev.of_node, 2846 "reset-gpio", 2847 0 2848 ); 2849 2850 ret = gpio_direction_output(pdata->gpio_reset, 1); 2851 if (ret < 0) { 2852 dev_crit( 2853 &spi->dev, 2854 "Reset GPIO %d did not set to output mode\n", 2855 pdata->gpio_reset 2856 ); 2857 } 2858 2859 return ret; 2860 } 2861 2862 /** 2863 * ca8210_interrupt_init() - Initialise the irq output from the ca8210 2864 * @spi: Pointer to target ca8210 spi device 2865 * 2866 * Return: 0 or linux error code 2867 */ 2868 static int ca8210_interrupt_init(struct spi_device *spi) 2869 { 2870 int ret; 2871 struct ca8210_platform_data *pdata = spi->dev.platform_data; 2872 2873 pdata->gpio_irq = of_get_named_gpio( 2874 spi->dev.of_node, 2875 "irq-gpio", 2876 0 2877 ); 2878 2879 pdata->irq_id = gpio_to_irq(pdata->gpio_irq); 2880 if (pdata->irq_id < 0) { 2881 dev_crit( 2882 &spi->dev, 2883 "Could not get irq for gpio pin %d\n", 2884 pdata->gpio_irq 2885 ); 2886 gpio_free(pdata->gpio_irq); 2887 return pdata->irq_id; 2888 } 2889 2890 ret = request_irq( 2891 pdata->irq_id, 2892 ca8210_interrupt_handler, 2893 IRQF_TRIGGER_FALLING, 2894 "ca8210-irq", 2895 spi_get_drvdata(spi) 2896 ); 2897 if (ret) { 2898 dev_crit(&spi->dev, "request_irq %d failed\n", pdata->irq_id); 2899 gpio_unexport(pdata->gpio_irq); 2900 gpio_free(pdata->gpio_irq); 2901 } 2902 2903 return ret; 2904 } 2905 2906 /** 2907 * ca8210_dev_com_init() - Initialise the spi communication component 2908 * @priv: Pointer to private data structure 2909 * 2910 * Return: 0 or linux error code 2911 */ 2912 static int ca8210_dev_com_init(struct ca8210_priv *priv) 2913 { 2914 priv->mlme_workqueue = alloc_ordered_workqueue( 2915 "MLME work queue", 2916 WQ_UNBOUND 2917 ); 2918 if (!priv->mlme_workqueue) { 2919 dev_crit(&priv->spi->dev, "alloc of mlme_workqueue failed!\n"); 2920 return -ENOMEM; 2921 } 2922 2923 priv->irq_workqueue = alloc_ordered_workqueue( 2924 "ca8210 irq worker", 2925 WQ_UNBOUND 2926 ); 2927 if (!priv->irq_workqueue) { 2928 dev_crit(&priv->spi->dev, "alloc of irq_workqueue failed!\n"); 2929 destroy_workqueue(priv->mlme_workqueue); 2930 return -ENOMEM; 2931 } 2932 2933 return 0; 2934 } 2935 2936 /** 2937 * ca8210_dev_com_clear() - Deinitialise the spi communication component 2938 * @priv: Pointer to private data structure 2939 */ 2940 static void ca8210_dev_com_clear(struct ca8210_priv *priv) 2941 { 2942 destroy_workqueue(priv->mlme_workqueue); 2943 destroy_workqueue(priv->irq_workqueue); 2944 } 2945 2946 #define CA8210_MAX_TX_POWERS (9) 2947 static const s32 ca8210_tx_powers[CA8210_MAX_TX_POWERS] = { 2948 800, 700, 600, 500, 400, 300, 200, 100, 0 2949 }; 2950 2951 #define CA8210_MAX_ED_LEVELS (21) 2952 static const s32 ca8210_ed_levels[CA8210_MAX_ED_LEVELS] = { 2953 -10300, -10250, -10200, -10150, -10100, -10050, -10000, -9950, -9900, 2954 -9850, -9800, -9750, -9700, -9650, -9600, -9550, -9500, -9450, -9400, 2955 -9350, -9300 2956 }; 2957 2958 /** 2959 * ca8210_hw_setup() - Populate the ieee802154_hw phy attributes with the 2960 * ca8210's defaults 2961 * @ca8210_hw: Pointer to ieee802154_hw to populate 2962 */ 2963 static void ca8210_hw_setup(struct ieee802154_hw *ca8210_hw) 2964 { 2965 /* Support channels 11-26 */ 2966 ca8210_hw->phy->supported.channels[0] = CA8210_VALID_CHANNELS; 2967 ca8210_hw->phy->supported.tx_powers_size = CA8210_MAX_TX_POWERS; 2968 ca8210_hw->phy->supported.tx_powers = ca8210_tx_powers; 2969 ca8210_hw->phy->supported.cca_ed_levels_size = CA8210_MAX_ED_LEVELS; 2970 ca8210_hw->phy->supported.cca_ed_levels = ca8210_ed_levels; 2971 ca8210_hw->phy->current_channel = 18; 2972 ca8210_hw->phy->current_page = 0; 2973 ca8210_hw->phy->transmit_power = 800; 2974 ca8210_hw->phy->cca.mode = NL802154_CCA_ENERGY_CARRIER; 2975 ca8210_hw->phy->cca.opt = NL802154_CCA_OPT_ENERGY_CARRIER_AND; 2976 ca8210_hw->phy->cca_ed_level = -9800; 2977 ca8210_hw->phy->symbol_duration = 16; 2978 ca8210_hw->phy->lifs_period = 40 * ca8210_hw->phy->symbol_duration; 2979 ca8210_hw->phy->sifs_period = 12 * ca8210_hw->phy->symbol_duration; 2980 ca8210_hw->flags = 2981 IEEE802154_HW_AFILT | 2982 IEEE802154_HW_OMIT_CKSUM | 2983 IEEE802154_HW_FRAME_RETRIES | 2984 IEEE802154_HW_PROMISCUOUS | 2985 IEEE802154_HW_CSMA_PARAMS; 2986 ca8210_hw->phy->flags = 2987 WPAN_PHY_FLAG_TXPOWER | 2988 WPAN_PHY_FLAG_CCA_ED_LEVEL | 2989 WPAN_PHY_FLAG_CCA_MODE; 2990 } 2991 2992 /** 2993 * ca8210_test_interface_init() - Initialise the test file interface 2994 * @priv: Pointer to private data structure 2995 * 2996 * Provided as an alternative to the standard linux network interface, the test 2997 * interface exposes a file in the filesystem (ca8210_test) that allows 2998 * 802.15.4 SAP Commands and Cascoda EVBME commands to be sent directly to 2999 * the stack. 3000 * 3001 * Return: 0 or linux error code 3002 */ 3003 static int ca8210_test_interface_init(struct ca8210_priv *priv) 3004 { 3005 struct ca8210_test *test = &priv->test; 3006 char node_name[32]; 3007 3008 snprintf( 3009 node_name, 3010 sizeof(node_name), 3011 "ca8210@%d_%d", 3012 priv->spi->master->bus_num, 3013 priv->spi->chip_select 3014 ); 3015 3016 test->ca8210_dfs_spi_int = debugfs_create_file( 3017 node_name, 3018 0600, /* S_IRUSR | S_IWUSR */ 3019 NULL, 3020 priv, 3021 &test_int_fops 3022 ); 3023 3024 debugfs_create_symlink("ca8210", NULL, node_name); 3025 init_waitqueue_head(&test->readq); 3026 return kfifo_alloc( 3027 &test->up_fifo, 3028 CA8210_TEST_INT_FIFO_SIZE, 3029 GFP_KERNEL 3030 ); 3031 } 3032 3033 /** 3034 * ca8210_test_interface_clear() - Deinitialise the test file interface 3035 * @priv: Pointer to private data structure 3036 */ 3037 static void ca8210_test_interface_clear(struct ca8210_priv *priv) 3038 { 3039 struct ca8210_test *test = &priv->test; 3040 3041 debugfs_remove(test->ca8210_dfs_spi_int); 3042 kfifo_free(&test->up_fifo); 3043 dev_info(&priv->spi->dev, "Test interface removed\n"); 3044 } 3045 3046 /** 3047 * ca8210_remove() - Shut down a ca8210 upon being disconnected 3048 * @spi_device: Pointer to spi device data structure 3049 * 3050 * Return: 0 or linux error code 3051 */ 3052 static int ca8210_remove(struct spi_device *spi_device) 3053 { 3054 struct ca8210_priv *priv; 3055 struct ca8210_platform_data *pdata; 3056 3057 dev_info(&spi_device->dev, "Removing ca8210\n"); 3058 3059 pdata = spi_device->dev.platform_data; 3060 if (pdata) { 3061 if (pdata->extclockenable) { 3062 ca8210_unregister_ext_clock(spi_device); 3063 ca8210_config_extern_clk(pdata, spi_device, 0); 3064 } 3065 free_irq(pdata->irq_id, spi_device->dev.driver_data); 3066 kfree(pdata); 3067 spi_device->dev.platform_data = NULL; 3068 } 3069 /* get spi_device private data */ 3070 priv = spi_get_drvdata(spi_device); 3071 if (priv) { 3072 dev_info( 3073 &spi_device->dev, 3074 "sync_down = %d, sync_up = %d\n", 3075 priv->sync_down, 3076 priv->sync_up 3077 ); 3078 ca8210_dev_com_clear(spi_device->dev.driver_data); 3079 if (priv->hw) { 3080 if (priv->hw_registered) 3081 ieee802154_unregister_hw(priv->hw); 3082 ieee802154_free_hw(priv->hw); 3083 priv->hw = NULL; 3084 dev_info( 3085 &spi_device->dev, 3086 "Unregistered & freed ieee802154_hw.\n" 3087 ); 3088 } 3089 if (IS_ENABLED(CONFIG_IEEE802154_CA8210_DEBUGFS)) 3090 ca8210_test_interface_clear(priv); 3091 } 3092 3093 return 0; 3094 } 3095 3096 /** 3097 * ca8210_probe() - Set up a connected ca8210 upon being detected by the system 3098 * @spi_device: Pointer to spi device data structure 3099 * 3100 * Return: 0 or linux error code 3101 */ 3102 static int ca8210_probe(struct spi_device *spi_device) 3103 { 3104 struct ca8210_priv *priv; 3105 struct ieee802154_hw *hw; 3106 struct ca8210_platform_data *pdata; 3107 int ret; 3108 3109 dev_info(&spi_device->dev, "Inserting ca8210\n"); 3110 3111 /* allocate ieee802154_hw and private data */ 3112 hw = ieee802154_alloc_hw(sizeof(struct ca8210_priv), &ca8210_phy_ops); 3113 if (!hw) { 3114 dev_crit(&spi_device->dev, "ieee802154_alloc_hw failed\n"); 3115 ret = -ENOMEM; 3116 goto error; 3117 } 3118 3119 priv = hw->priv; 3120 priv->hw = hw; 3121 priv->spi = spi_device; 3122 hw->parent = &spi_device->dev; 3123 spin_lock_init(&priv->lock); 3124 priv->async_tx_pending = false; 3125 priv->hw_registered = false; 3126 priv->sync_up = 0; 3127 priv->sync_down = 0; 3128 priv->promiscuous = false; 3129 priv->retries = 0; 3130 init_completion(&priv->ca8210_is_awake); 3131 init_completion(&priv->spi_transfer_complete); 3132 init_completion(&priv->sync_exchange_complete); 3133 spi_set_drvdata(priv->spi, priv); 3134 if (IS_ENABLED(CONFIG_IEEE802154_CA8210_DEBUGFS)) { 3135 cascoda_api_upstream = ca8210_test_int_driver_write; 3136 ca8210_test_interface_init(priv); 3137 } else { 3138 cascoda_api_upstream = NULL; 3139 } 3140 ca8210_hw_setup(hw); 3141 ieee802154_random_extended_addr(&hw->phy->perm_extended_addr); 3142 3143 pdata = kmalloc(sizeof(*pdata), GFP_KERNEL); 3144 if (!pdata) { 3145 ret = -ENOMEM; 3146 goto error; 3147 } 3148 3149 priv->spi->dev.platform_data = pdata; 3150 ret = ca8210_get_platform_data(priv->spi, pdata); 3151 if (ret) { 3152 dev_crit(&spi_device->dev, "ca8210_get_platform_data failed\n"); 3153 goto error; 3154 } 3155 3156 ret = ca8210_dev_com_init(priv); 3157 if (ret) { 3158 dev_crit(&spi_device->dev, "ca8210_dev_com_init failed\n"); 3159 goto error; 3160 } 3161 ret = ca8210_reset_init(priv->spi); 3162 if (ret) { 3163 dev_crit(&spi_device->dev, "ca8210_reset_init failed\n"); 3164 goto error; 3165 } 3166 3167 ret = ca8210_interrupt_init(priv->spi); 3168 if (ret) { 3169 dev_crit(&spi_device->dev, "ca8210_interrupt_init failed\n"); 3170 goto error; 3171 } 3172 3173 msleep(100); 3174 3175 ca8210_reset_send(priv->spi, 1); 3176 3177 ret = tdme_chipinit(priv->spi); 3178 if (ret) { 3179 dev_crit(&spi_device->dev, "tdme_chipinit failed\n"); 3180 goto error; 3181 } 3182 3183 if (pdata->extclockenable) { 3184 ret = ca8210_config_extern_clk(pdata, priv->spi, 1); 3185 if (ret) { 3186 dev_crit( 3187 &spi_device->dev, 3188 "ca8210_config_extern_clk failed\n" 3189 ); 3190 goto error; 3191 } 3192 ret = ca8210_register_ext_clock(priv->spi); 3193 if (ret) { 3194 dev_crit( 3195 &spi_device->dev, 3196 "ca8210_register_ext_clock failed\n" 3197 ); 3198 goto error; 3199 } 3200 } 3201 3202 ret = ieee802154_register_hw(hw); 3203 if (ret) { 3204 dev_crit(&spi_device->dev, "ieee802154_register_hw failed\n"); 3205 goto error; 3206 } 3207 priv->hw_registered = true; 3208 3209 return 0; 3210 error: 3211 msleep(100); /* wait for pending spi transfers to complete */ 3212 ca8210_remove(spi_device); 3213 return link_to_linux_err(ret); 3214 } 3215 3216 static const struct of_device_id ca8210_of_ids[] = { 3217 {.compatible = "cascoda,ca8210", }, 3218 {}, 3219 }; 3220 MODULE_DEVICE_TABLE(of, ca8210_of_ids); 3221 3222 static struct spi_driver ca8210_spi_driver = { 3223 .driver = { 3224 .name = DRIVER_NAME, 3225 .owner = THIS_MODULE, 3226 .of_match_table = of_match_ptr(ca8210_of_ids), 3227 }, 3228 .probe = ca8210_probe, 3229 .remove = ca8210_remove 3230 }; 3231 3232 module_spi_driver(ca8210_spi_driver); 3233 3234 MODULE_AUTHOR("Harry Morris <h.morris@cascoda.com>"); 3235 MODULE_DESCRIPTION("CA-8210 SoftMAC driver"); 3236 MODULE_LICENSE("Dual BSD/GPL"); 3237 MODULE_VERSION("1.0"); 3238