1 /* 2 * http://www.cascoda.com/products/ca-821x/ 3 * Copyright (c) 2016, Cascoda, Ltd. 4 * All rights reserved. 5 * 6 * This code is dual-licensed under both GPLv2 and 3-clause BSD. What follows is 7 * the license notice for both respectively. 8 * 9 ******************************************************************************* 10 * 11 * This program is free software; you can redistribute it and/or 12 * modify it under the terms of the GNU General Public License 13 * as published by the Free Software Foundation; either version 2 14 * of the License, or (at your option) any later version. 15 * 16 * This program is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * 21 ******************************************************************************* 22 * 23 * Redistribution and use in source and binary forms, with or without 24 * modification, are permitted provided that the following conditions are met: 25 * 26 * 1. Redistributions of source code must retain the above copyright notice, 27 * this list of conditions and the following disclaimer. 28 * 29 * 2. Redistributions in binary form must reproduce the above copyright notice, 30 * this list of conditions and the following disclaimer in the documentation 31 * and/or other materials provided with the distribution. 32 * 33 * 3. Neither the name of the copyright holder nor the names of its contributors 34 * may be used to endorse or promote products derived from this software without 35 * specific prior written permission. 36 * 37 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 38 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 39 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 40 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE 41 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 42 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 43 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 44 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 45 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 46 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 47 * POSSIBILITY OF SUCH DAMAGE. 48 */ 49 50 #include <linux/cdev.h> 51 #include <linux/clk-provider.h> 52 #include <linux/debugfs.h> 53 #include <linux/delay.h> 54 #include <linux/gpio.h> 55 #include <linux/ieee802154.h> 56 #include <linux/kfifo.h> 57 #include <linux/of.h> 58 #include <linux/of_device.h> 59 #include <linux/of_gpio.h> 60 #include <linux/module.h> 61 #include <linux/mutex.h> 62 #include <linux/poll.h> 63 #include <linux/skbuff.h> 64 #include <linux/slab.h> 65 #include <linux/spi/spi.h> 66 #include <linux/spinlock.h> 67 #include <linux/string.h> 68 #include <linux/workqueue.h> 69 70 #include <net/ieee802154_netdev.h> 71 #include <net/mac802154.h> 72 73 #define DRIVER_NAME "ca8210" 74 75 /* external clock frequencies */ 76 #define ONE_MHZ 1000000 77 #define TWO_MHZ (2 * ONE_MHZ) 78 #define FOUR_MHZ (4 * ONE_MHZ) 79 #define EIGHT_MHZ (8 * ONE_MHZ) 80 #define SIXTEEN_MHZ (16 * ONE_MHZ) 81 82 /* spi constants */ 83 #define CA8210_SPI_BUF_SIZE 256 84 #define CA8210_SYNC_TIMEOUT 1000 /* Timeout for synchronous commands [ms] */ 85 86 /* test interface constants */ 87 #define CA8210_TEST_INT_FILE_NAME "ca8210_test" 88 #define CA8210_TEST_INT_FIFO_SIZE 256 89 90 /* MAC status enumerations */ 91 #define MAC_SUCCESS (0x00) 92 #define MAC_ERROR (0x01) 93 #define MAC_CANCELLED (0x02) 94 #define MAC_READY_FOR_POLL (0x03) 95 #define MAC_COUNTER_ERROR (0xDB) 96 #define MAC_IMPROPER_KEY_TYPE (0xDC) 97 #define MAC_IMPROPER_SECURITY_LEVEL (0xDD) 98 #define MAC_UNSUPPORTED_LEGACY (0xDE) 99 #define MAC_UNSUPPORTED_SECURITY (0xDF) 100 #define MAC_BEACON_LOST (0xE0) 101 #define MAC_CHANNEL_ACCESS_FAILURE (0xE1) 102 #define MAC_DENIED (0xE2) 103 #define MAC_DISABLE_TRX_FAILURE (0xE3) 104 #define MAC_SECURITY_ERROR (0xE4) 105 #define MAC_FRAME_TOO_LONG (0xE5) 106 #define MAC_INVALID_GTS (0xE6) 107 #define MAC_INVALID_HANDLE (0xE7) 108 #define MAC_INVALID_PARAMETER (0xE8) 109 #define MAC_NO_ACK (0xE9) 110 #define MAC_NO_BEACON (0xEA) 111 #define MAC_NO_DATA (0xEB) 112 #define MAC_NO_SHORT_ADDRESS (0xEC) 113 #define MAC_OUT_OF_CAP (0xED) 114 #define MAC_PAN_ID_CONFLICT (0xEE) 115 #define MAC_REALIGNMENT (0xEF) 116 #define MAC_TRANSACTION_EXPIRED (0xF0) 117 #define MAC_TRANSACTION_OVERFLOW (0xF1) 118 #define MAC_TX_ACTIVE (0xF2) 119 #define MAC_UNAVAILABLE_KEY (0xF3) 120 #define MAC_UNSUPPORTED_ATTRIBUTE (0xF4) 121 #define MAC_INVALID_ADDRESS (0xF5) 122 #define MAC_ON_TIME_TOO_LONG (0xF6) 123 #define MAC_PAST_TIME (0xF7) 124 #define MAC_TRACKING_OFF (0xF8) 125 #define MAC_INVALID_INDEX (0xF9) 126 #define MAC_LIMIT_REACHED (0xFA) 127 #define MAC_READ_ONLY (0xFB) 128 #define MAC_SCAN_IN_PROGRESS (0xFC) 129 #define MAC_SUPERFRAME_OVERLAP (0xFD) 130 #define MAC_SYSTEM_ERROR (0xFF) 131 132 /* HWME attribute IDs */ 133 #define HWME_EDTHRESHOLD (0x04) 134 #define HWME_EDVALUE (0x06) 135 #define HWME_SYSCLKOUT (0x0F) 136 #define HWME_LQILIMIT (0x11) 137 138 /* TDME attribute IDs */ 139 #define TDME_CHANNEL (0x00) 140 #define TDME_ATM_CONFIG (0x06) 141 142 #define MAX_HWME_ATTRIBUTE_SIZE 16 143 #define MAX_TDME_ATTRIBUTE_SIZE 2 144 145 /* PHY/MAC PIB Attribute Enumerations */ 146 #define PHY_CURRENT_CHANNEL (0x00) 147 #define PHY_TRANSMIT_POWER (0x02) 148 #define PHY_CCA_MODE (0x03) 149 #define MAC_ASSOCIATION_PERMIT (0x41) 150 #define MAC_AUTO_REQUEST (0x42) 151 #define MAC_BATT_LIFE_EXT (0x43) 152 #define MAC_BATT_LIFE_EXT_PERIODS (0x44) 153 #define MAC_BEACON_PAYLOAD (0x45) 154 #define MAC_BEACON_PAYLOAD_LENGTH (0x46) 155 #define MAC_BEACON_ORDER (0x47) 156 #define MAC_GTS_PERMIT (0x4d) 157 #define MAC_MAX_CSMA_BACKOFFS (0x4e) 158 #define MAC_MIN_BE (0x4f) 159 #define MAC_PAN_ID (0x50) 160 #define MAC_PROMISCUOUS_MODE (0x51) 161 #define MAC_RX_ON_WHEN_IDLE (0x52) 162 #define MAC_SHORT_ADDRESS (0x53) 163 #define MAC_SUPERFRAME_ORDER (0x54) 164 #define MAC_ASSOCIATED_PAN_COORD (0x56) 165 #define MAC_MAX_BE (0x57) 166 #define MAC_MAX_FRAME_RETRIES (0x59) 167 #define MAC_RESPONSE_WAIT_TIME (0x5A) 168 #define MAC_SECURITY_ENABLED (0x5D) 169 170 #define MAC_AUTO_REQUEST_SECURITY_LEVEL (0x78) 171 #define MAC_AUTO_REQUEST_KEY_ID_MODE (0x79) 172 173 #define NS_IEEE_ADDRESS (0xFF) /* Non-standard IEEE address */ 174 175 /* MAC Address Mode Definitions */ 176 #define MAC_MODE_NO_ADDR (0x00) 177 #define MAC_MODE_SHORT_ADDR (0x02) 178 #define MAC_MODE_LONG_ADDR (0x03) 179 180 /* MAC constants */ 181 #define MAX_BEACON_OVERHEAD (75) 182 #define MAX_BEACON_PAYLOAD_LENGTH (IEEE802154_MTU - MAX_BEACON_OVERHEAD) 183 184 #define MAX_ATTRIBUTE_SIZE (122) 185 #define MAX_DATA_SIZE (114) 186 187 #define CA8210_VALID_CHANNELS (0x07FFF800) 188 189 /* MAC workarounds for V1.1 and MPW silicon (V0.x) */ 190 #define CA8210_MAC_WORKAROUNDS (0) 191 #define CA8210_MAC_MPW (0) 192 193 /* memory manipulation macros */ 194 #define LS_BYTE(x) ((u8)((x) & 0xFF)) 195 #define MS_BYTE(x) ((u8)(((x) >> 8) & 0xFF)) 196 197 /* message ID codes in SPI commands */ 198 /* downstream */ 199 #define MCPS_DATA_REQUEST (0x00) 200 #define MLME_ASSOCIATE_REQUEST (0x02) 201 #define MLME_ASSOCIATE_RESPONSE (0x03) 202 #define MLME_DISASSOCIATE_REQUEST (0x04) 203 #define MLME_GET_REQUEST (0x05) 204 #define MLME_ORPHAN_RESPONSE (0x06) 205 #define MLME_RESET_REQUEST (0x07) 206 #define MLME_RX_ENABLE_REQUEST (0x08) 207 #define MLME_SCAN_REQUEST (0x09) 208 #define MLME_SET_REQUEST (0x0A) 209 #define MLME_START_REQUEST (0x0B) 210 #define MLME_POLL_REQUEST (0x0D) 211 #define HWME_SET_REQUEST (0x0E) 212 #define HWME_GET_REQUEST (0x0F) 213 #define TDME_SETSFR_REQUEST (0x11) 214 #define TDME_GETSFR_REQUEST (0x12) 215 #define TDME_SET_REQUEST (0x14) 216 /* upstream */ 217 #define MCPS_DATA_INDICATION (0x00) 218 #define MCPS_DATA_CONFIRM (0x01) 219 #define MLME_RESET_CONFIRM (0x0A) 220 #define MLME_SET_CONFIRM (0x0E) 221 #define MLME_START_CONFIRM (0x0F) 222 #define HWME_SET_CONFIRM (0x12) 223 #define HWME_GET_CONFIRM (0x13) 224 #define HWME_WAKEUP_INDICATION (0x15) 225 #define TDME_SETSFR_CONFIRM (0x17) 226 227 /* SPI command IDs */ 228 /* bit indicating a confirm or indication from slave to master */ 229 #define SPI_S2M (0x20) 230 /* bit indicating a synchronous message */ 231 #define SPI_SYN (0x40) 232 233 /* SPI command definitions */ 234 #define SPI_IDLE (0xFF) 235 #define SPI_NACK (0xF0) 236 237 #define SPI_MCPS_DATA_REQUEST (MCPS_DATA_REQUEST) 238 #define SPI_MCPS_DATA_INDICATION (MCPS_DATA_INDICATION + SPI_S2M) 239 #define SPI_MCPS_DATA_CONFIRM (MCPS_DATA_CONFIRM + SPI_S2M) 240 241 #define SPI_MLME_ASSOCIATE_REQUEST (MLME_ASSOCIATE_REQUEST) 242 #define SPI_MLME_RESET_REQUEST (MLME_RESET_REQUEST + SPI_SYN) 243 #define SPI_MLME_SET_REQUEST (MLME_SET_REQUEST + SPI_SYN) 244 #define SPI_MLME_START_REQUEST (MLME_START_REQUEST + SPI_SYN) 245 #define SPI_MLME_RESET_CONFIRM (MLME_RESET_CONFIRM + SPI_S2M + SPI_SYN) 246 #define SPI_MLME_SET_CONFIRM (MLME_SET_CONFIRM + SPI_S2M + SPI_SYN) 247 #define SPI_MLME_START_CONFIRM (MLME_START_CONFIRM + SPI_S2M + SPI_SYN) 248 249 #define SPI_HWME_SET_REQUEST (HWME_SET_REQUEST + SPI_SYN) 250 #define SPI_HWME_GET_REQUEST (HWME_GET_REQUEST + SPI_SYN) 251 #define SPI_HWME_SET_CONFIRM (HWME_SET_CONFIRM + SPI_S2M + SPI_SYN) 252 #define SPI_HWME_GET_CONFIRM (HWME_GET_CONFIRM + SPI_S2M + SPI_SYN) 253 #define SPI_HWME_WAKEUP_INDICATION (HWME_WAKEUP_INDICATION + SPI_S2M) 254 255 #define SPI_TDME_SETSFR_REQUEST (TDME_SETSFR_REQUEST + SPI_SYN) 256 #define SPI_TDME_SET_REQUEST (TDME_SET_REQUEST + SPI_SYN) 257 #define SPI_TDME_SETSFR_CONFIRM (TDME_SETSFR_CONFIRM + SPI_S2M + SPI_SYN) 258 259 /* TDME SFR addresses */ 260 /* Page 0 */ 261 #define CA8210_SFR_PACFG (0xB1) 262 #define CA8210_SFR_MACCON (0xD8) 263 #define CA8210_SFR_PACFGIB (0xFE) 264 /* Page 1 */ 265 #define CA8210_SFR_LOTXCAL (0xBF) 266 #define CA8210_SFR_PTHRH (0xD1) 267 #define CA8210_SFR_PRECFG (0xD3) 268 #define CA8210_SFR_LNAGX40 (0xE1) 269 #define CA8210_SFR_LNAGX41 (0xE2) 270 #define CA8210_SFR_LNAGX42 (0xE3) 271 #define CA8210_SFR_LNAGX43 (0xE4) 272 #define CA8210_SFR_LNAGX44 (0xE5) 273 #define CA8210_SFR_LNAGX45 (0xE6) 274 #define CA8210_SFR_LNAGX46 (0xE7) 275 #define CA8210_SFR_LNAGX47 (0xE9) 276 277 #define PACFGIB_DEFAULT_CURRENT (0x3F) 278 #define PTHRH_DEFAULT_THRESHOLD (0x5A) 279 #define LNAGX40_DEFAULT_GAIN (0x29) /* 10dB */ 280 #define LNAGX41_DEFAULT_GAIN (0x54) /* 21dB */ 281 #define LNAGX42_DEFAULT_GAIN (0x6C) /* 27dB */ 282 #define LNAGX43_DEFAULT_GAIN (0x7A) /* 30dB */ 283 #define LNAGX44_DEFAULT_GAIN (0x84) /* 33dB */ 284 #define LNAGX45_DEFAULT_GAIN (0x8B) /* 34dB */ 285 #define LNAGX46_DEFAULT_GAIN (0x92) /* 36dB */ 286 #define LNAGX47_DEFAULT_GAIN (0x96) /* 37dB */ 287 288 #define CA8210_IOCTL_HARD_RESET (0x00) 289 290 /* Structs/Enums */ 291 292 /** 293 * struct cas_control - spi transfer structure 294 * @msg: spi_message for each exchange 295 * @transfer: spi_transfer for each exchange 296 * @tx_buf: source array for transmission 297 * @tx_in_buf: array storing bytes received during transmission 298 * @priv: pointer to private data 299 * 300 * This structure stores all the necessary data passed around during a single 301 * spi exchange. 302 */ 303 struct cas_control { 304 struct spi_message msg; 305 struct spi_transfer transfer; 306 307 u8 tx_buf[CA8210_SPI_BUF_SIZE]; 308 u8 tx_in_buf[CA8210_SPI_BUF_SIZE]; 309 310 struct ca8210_priv *priv; 311 }; 312 313 /** 314 * struct ca8210_test - ca8210 test interface structure 315 * @ca8210_dfs_spi_int: pointer to the entry in the debug fs for this device 316 * @up_fifo: fifo for upstream messages 317 * 318 * This structure stores all the data pertaining to the debug interface 319 */ 320 struct ca8210_test { 321 struct dentry *ca8210_dfs_spi_int; 322 struct kfifo up_fifo; 323 wait_queue_head_t readq; 324 }; 325 326 /** 327 * struct ca8210_priv - ca8210 private data structure 328 * @spi: pointer to the ca8210 spi device object 329 * @hw: pointer to the ca8210 ieee802154_hw object 330 * @hw_registered: true if hw has been registered with ieee802154 331 * @lock: spinlock protecting the private data area 332 * @mlme_workqueue: workqueue for triggering MLME Reset 333 * @irq_workqueue: workqueue for irq processing 334 * @tx_skb: current socket buffer to transmit 335 * @nextmsduhandle: msdu handle to pass to the 15.4 MAC layer for the 336 * next transmission 337 * @clk: external clock provided by the ca8210 338 * @last_dsn: sequence number of last data packet received, for 339 * resend detection 340 * @test: test interface data section for this instance 341 * @async_tx_pending: true if an asynchronous transmission was started and 342 * is not complete 343 * @sync_command_response: pointer to buffer to fill with sync response 344 * @ca8210_is_awake: nonzero if ca8210 is initialised, ready for comms 345 * @sync_down: counts number of downstream synchronous commands 346 * @sync_up: counts number of upstream synchronous commands 347 * @spi_transfer_complete completion object for a single spi_transfer 348 * @sync_exchange_complete completion object for a complete synchronous API 349 * exchange 350 * @promiscuous whether the ca8210 is in promiscuous mode or not 351 * @retries: records how many times the current pending spi 352 * transfer has been retried 353 */ 354 struct ca8210_priv { 355 struct spi_device *spi; 356 struct ieee802154_hw *hw; 357 bool hw_registered; 358 spinlock_t lock; 359 struct workqueue_struct *mlme_workqueue; 360 struct workqueue_struct *irq_workqueue; 361 struct sk_buff *tx_skb; 362 u8 nextmsduhandle; 363 struct clk *clk; 364 int last_dsn; 365 struct ca8210_test test; 366 bool async_tx_pending; 367 u8 *sync_command_response; 368 struct completion ca8210_is_awake; 369 int sync_down, sync_up; 370 struct completion spi_transfer_complete, sync_exchange_complete; 371 bool promiscuous; 372 int retries; 373 }; 374 375 /** 376 * struct work_priv_container - link between a work object and the relevant 377 * device's private data 378 * @work: work object being executed 379 * @priv: device's private data section 380 * 381 */ 382 struct work_priv_container { 383 struct work_struct work; 384 struct ca8210_priv *priv; 385 }; 386 387 /** 388 * struct ca8210_platform_data - ca8210 platform data structure 389 * @extclockenable: true if the external clock is to be enabled 390 * @extclockfreq: frequency of the external clock 391 * @extclockgpio: ca8210 output gpio of the external clock 392 * @gpio_reset: gpio number of ca8210 reset line 393 * @gpio_irq: gpio number of ca8210 interrupt line 394 * @irq_id: identifier for the ca8210 irq 395 * 396 */ 397 struct ca8210_platform_data { 398 bool extclockenable; 399 unsigned int extclockfreq; 400 unsigned int extclockgpio; 401 int gpio_reset; 402 int gpio_irq; 403 int irq_id; 404 }; 405 406 /** 407 * struct fulladdr - full MAC addressing information structure 408 * @mode: address mode (none, short, extended) 409 * @pan_id: 16-bit LE pan id 410 * @address: LE address, variable length as specified by mode 411 * 412 */ 413 struct fulladdr { 414 u8 mode; 415 u8 pan_id[2]; 416 u8 address[8]; 417 }; 418 419 /** 420 * union macaddr: generic MAC address container 421 * @short_addr: 16-bit short address 422 * @ieee_address: 64-bit extended address as LE byte array 423 * 424 */ 425 union macaddr { 426 u16 short_address; 427 u8 ieee_address[8]; 428 }; 429 430 /** 431 * struct secspec: security specification for SAP commands 432 * @security_level: 0-7, controls level of authentication & encryption 433 * @key_id_mode: 0-3, specifies how to obtain key 434 * @key_source: extended key retrieval data 435 * @key_index: single-byte key identifier 436 * 437 */ 438 struct secspec { 439 u8 security_level; 440 u8 key_id_mode; 441 u8 key_source[8]; 442 u8 key_index; 443 }; 444 445 /* downlink functions parameter set definitions */ 446 struct mcps_data_request_pset { 447 u8 src_addr_mode; 448 struct fulladdr dst; 449 u8 msdu_length; 450 u8 msdu_handle; 451 u8 tx_options; 452 u8 msdu[MAX_DATA_SIZE]; 453 }; 454 455 struct mlme_set_request_pset { 456 u8 pib_attribute; 457 u8 pib_attribute_index; 458 u8 pib_attribute_length; 459 u8 pib_attribute_value[MAX_ATTRIBUTE_SIZE]; 460 }; 461 462 struct hwme_set_request_pset { 463 u8 hw_attribute; 464 u8 hw_attribute_length; 465 u8 hw_attribute_value[MAX_HWME_ATTRIBUTE_SIZE]; 466 }; 467 468 struct hwme_get_request_pset { 469 u8 hw_attribute; 470 }; 471 472 struct tdme_setsfr_request_pset { 473 u8 sfr_page; 474 u8 sfr_address; 475 u8 sfr_value; 476 }; 477 478 /* uplink functions parameter set definitions */ 479 struct hwme_set_confirm_pset { 480 u8 status; 481 u8 hw_attribute; 482 }; 483 484 struct hwme_get_confirm_pset { 485 u8 status; 486 u8 hw_attribute; 487 u8 hw_attribute_length; 488 u8 hw_attribute_value[MAX_HWME_ATTRIBUTE_SIZE]; 489 }; 490 491 struct tdme_setsfr_confirm_pset { 492 u8 status; 493 u8 sfr_page; 494 u8 sfr_address; 495 }; 496 497 struct mac_message { 498 u8 command_id; 499 u8 length; 500 union { 501 struct mcps_data_request_pset data_req; 502 struct mlme_set_request_pset set_req; 503 struct hwme_set_request_pset hwme_set_req; 504 struct hwme_get_request_pset hwme_get_req; 505 struct tdme_setsfr_request_pset tdme_set_sfr_req; 506 struct hwme_set_confirm_pset hwme_set_cnf; 507 struct hwme_get_confirm_pset hwme_get_cnf; 508 struct tdme_setsfr_confirm_pset tdme_set_sfr_cnf; 509 u8 u8param; 510 u8 status; 511 u8 payload[148]; 512 } pdata; 513 }; 514 515 union pa_cfg_sfr { 516 struct { 517 u8 bias_current_trim : 3; 518 u8 /* reserved */ : 1; 519 u8 buffer_capacitor_trim : 3; 520 u8 boost : 1; 521 }; 522 u8 paib; 523 }; 524 525 struct preamble_cfg_sfr { 526 u8 timeout_symbols : 3; 527 u8 acquisition_symbols : 3; 528 u8 search_symbols : 2; 529 }; 530 531 static int (*cascoda_api_upstream)( 532 const u8 *buf, 533 size_t len, 534 void *device_ref 535 ); 536 537 /** 538 * link_to_linux_err() - Translates an 802.15.4 return code into the closest 539 * linux error 540 * @link_status: 802.15.4 status code 541 * 542 * Return: 0 or Linux error code 543 */ 544 static int link_to_linux_err(int link_status) 545 { 546 if (link_status < 0) { 547 /* status is already a Linux code */ 548 return link_status; 549 } 550 switch (link_status) { 551 case MAC_SUCCESS: 552 case MAC_REALIGNMENT: 553 return 0; 554 case MAC_IMPROPER_KEY_TYPE: 555 return -EKEYREJECTED; 556 case MAC_IMPROPER_SECURITY_LEVEL: 557 case MAC_UNSUPPORTED_LEGACY: 558 case MAC_DENIED: 559 return -EACCES; 560 case MAC_BEACON_LOST: 561 case MAC_NO_ACK: 562 case MAC_NO_BEACON: 563 return -ENETUNREACH; 564 case MAC_CHANNEL_ACCESS_FAILURE: 565 case MAC_TX_ACTIVE: 566 case MAC_SCAN_IN_PROGRESS: 567 return -EBUSY; 568 case MAC_DISABLE_TRX_FAILURE: 569 case MAC_OUT_OF_CAP: 570 return -EAGAIN; 571 case MAC_FRAME_TOO_LONG: 572 return -EMSGSIZE; 573 case MAC_INVALID_GTS: 574 case MAC_PAST_TIME: 575 return -EBADSLT; 576 case MAC_INVALID_HANDLE: 577 return -EBADMSG; 578 case MAC_INVALID_PARAMETER: 579 case MAC_UNSUPPORTED_ATTRIBUTE: 580 case MAC_ON_TIME_TOO_LONG: 581 case MAC_INVALID_INDEX: 582 return -EINVAL; 583 case MAC_NO_DATA: 584 return -ENODATA; 585 case MAC_NO_SHORT_ADDRESS: 586 return -EFAULT; 587 case MAC_PAN_ID_CONFLICT: 588 return -EADDRINUSE; 589 case MAC_TRANSACTION_EXPIRED: 590 return -ETIME; 591 case MAC_TRANSACTION_OVERFLOW: 592 return -ENOBUFS; 593 case MAC_UNAVAILABLE_KEY: 594 return -ENOKEY; 595 case MAC_INVALID_ADDRESS: 596 return -ENXIO; 597 case MAC_TRACKING_OFF: 598 case MAC_SUPERFRAME_OVERLAP: 599 return -EREMOTEIO; 600 case MAC_LIMIT_REACHED: 601 return -EDQUOT; 602 case MAC_READ_ONLY: 603 return -EROFS; 604 default: 605 return -EPROTO; 606 } 607 } 608 609 /** 610 * ca8210_test_int_driver_write() - Writes a message to the test interface to be 611 * read by the userspace 612 * @buf: Buffer containing upstream message 613 * @len: length of message to write 614 * @spi: SPI device of message originator 615 * 616 * Return: 0 or linux error code 617 */ 618 static int ca8210_test_int_driver_write( 619 const u8 *buf, 620 size_t len, 621 void *spi 622 ) 623 { 624 struct ca8210_priv *priv = spi_get_drvdata(spi); 625 struct ca8210_test *test = &priv->test; 626 char *fifo_buffer; 627 int i; 628 629 dev_dbg( 630 &priv->spi->dev, 631 "test_interface: Buffering upstream message:\n" 632 ); 633 for (i = 0; i < len; i++) 634 dev_dbg(&priv->spi->dev, "%#03x\n", buf[i]); 635 636 fifo_buffer = kmalloc(len, GFP_KERNEL); 637 if (!fifo_buffer) 638 return -ENOMEM; 639 memcpy(fifo_buffer, buf, len); 640 kfifo_in(&test->up_fifo, &fifo_buffer, 4); 641 wake_up_interruptible(&priv->test.readq); 642 643 return 0; 644 } 645 646 /* SPI Operation */ 647 648 static int ca8210_net_rx( 649 struct ieee802154_hw *hw, 650 u8 *command, 651 size_t len 652 ); 653 static u8 mlme_reset_request_sync( 654 u8 set_default_pib, 655 void *device_ref 656 ); 657 static int ca8210_spi_transfer( 658 struct spi_device *spi, 659 const u8 *buf, 660 size_t len 661 ); 662 663 /** 664 * ca8210_reset_send() - Hard resets the ca8210 for a given time 665 * @spi: Pointer to target ca8210 spi device 666 * @ms: Milliseconds to hold the reset line low for 667 */ 668 static void ca8210_reset_send(struct spi_device *spi, unsigned int ms) 669 { 670 struct ca8210_platform_data *pdata = spi->dev.platform_data; 671 struct ca8210_priv *priv = spi_get_drvdata(spi); 672 long status; 673 674 gpio_set_value(pdata->gpio_reset, 0); 675 reinit_completion(&priv->ca8210_is_awake); 676 msleep(ms); 677 gpio_set_value(pdata->gpio_reset, 1); 678 priv->promiscuous = false; 679 680 /* Wait until wakeup indication seen */ 681 status = wait_for_completion_interruptible_timeout( 682 &priv->ca8210_is_awake, 683 msecs_to_jiffies(CA8210_SYNC_TIMEOUT) 684 ); 685 if (status == 0) { 686 dev_crit( 687 &spi->dev, 688 "Fatal: No wakeup from ca8210 after reset!\n" 689 ); 690 } 691 692 dev_dbg(&spi->dev, "Reset the device\n"); 693 } 694 695 /** 696 * ca8210_mlme_reset_worker() - Resets the MLME, Called when the MAC OVERFLOW 697 * condition happens. 698 * @work: Pointer to work being executed 699 */ 700 static void ca8210_mlme_reset_worker(struct work_struct *work) 701 { 702 struct work_priv_container *wpc = container_of( 703 work, 704 struct work_priv_container, 705 work 706 ); 707 struct ca8210_priv *priv = wpc->priv; 708 709 mlme_reset_request_sync(0, priv->spi); 710 kfree(wpc); 711 } 712 713 /** 714 * ca8210_rx_done() - Calls various message dispatches responding to a received 715 * command 716 * @arg: Pointer to the cas_control object for the relevant spi transfer 717 * 718 * Presents a received SAP command from the ca8210 to the Cascoda EVBME, test 719 * interface and network driver. 720 */ 721 static void ca8210_rx_done(struct cas_control *cas_ctl) 722 { 723 u8 *buf; 724 u8 len; 725 struct work_priv_container *mlme_reset_wpc; 726 struct ca8210_priv *priv = cas_ctl->priv; 727 728 buf = cas_ctl->tx_in_buf; 729 len = buf[1] + 2; 730 if (len > CA8210_SPI_BUF_SIZE) { 731 dev_crit( 732 &priv->spi->dev, 733 "Received packet len (%d) erroneously long\n", 734 len 735 ); 736 goto finish; 737 } 738 739 if (buf[0] & SPI_SYN) { 740 if (priv->sync_command_response) { 741 memcpy(priv->sync_command_response, buf, len); 742 complete(&priv->sync_exchange_complete); 743 } else { 744 if (cascoda_api_upstream) 745 cascoda_api_upstream(buf, len, priv->spi); 746 priv->sync_up++; 747 } 748 } else { 749 if (cascoda_api_upstream) 750 cascoda_api_upstream(buf, len, priv->spi); 751 } 752 753 ca8210_net_rx(priv->hw, buf, len); 754 if (buf[0] == SPI_MCPS_DATA_CONFIRM) { 755 if (buf[3] == MAC_TRANSACTION_OVERFLOW) { 756 dev_info( 757 &priv->spi->dev, 758 "Waiting for transaction overflow to stabilise...\n"); 759 msleep(2000); 760 dev_info( 761 &priv->spi->dev, 762 "Resetting MAC...\n"); 763 764 mlme_reset_wpc = kmalloc(sizeof(*mlme_reset_wpc), 765 GFP_KERNEL); 766 if (!mlme_reset_wpc) 767 goto finish; 768 INIT_WORK( 769 &mlme_reset_wpc->work, 770 ca8210_mlme_reset_worker 771 ); 772 mlme_reset_wpc->priv = priv; 773 queue_work(priv->mlme_workqueue, &mlme_reset_wpc->work); 774 } 775 } else if (buf[0] == SPI_HWME_WAKEUP_INDICATION) { 776 dev_notice( 777 &priv->spi->dev, 778 "Wakeup indication received, reason:\n" 779 ); 780 switch (buf[2]) { 781 case 0: 782 dev_notice( 783 &priv->spi->dev, 784 "Transceiver woken up from Power Up / System Reset\n" 785 ); 786 break; 787 case 1: 788 dev_notice( 789 &priv->spi->dev, 790 "Watchdog Timer Time-Out\n" 791 ); 792 break; 793 case 2: 794 dev_notice( 795 &priv->spi->dev, 796 "Transceiver woken up from Power-Off by Sleep Timer Time-Out\n"); 797 break; 798 case 3: 799 dev_notice( 800 &priv->spi->dev, 801 "Transceiver woken up from Power-Off by GPIO Activity\n" 802 ); 803 break; 804 case 4: 805 dev_notice( 806 &priv->spi->dev, 807 "Transceiver woken up from Standby by Sleep Timer Time-Out\n" 808 ); 809 break; 810 case 5: 811 dev_notice( 812 &priv->spi->dev, 813 "Transceiver woken up from Standby by GPIO Activity\n" 814 ); 815 break; 816 case 6: 817 dev_notice( 818 &priv->spi->dev, 819 "Sleep-Timer Time-Out in Active Mode\n" 820 ); 821 break; 822 default: 823 dev_warn(&priv->spi->dev, "Wakeup reason unknown\n"); 824 break; 825 } 826 complete(&priv->ca8210_is_awake); 827 } 828 829 finish:; 830 } 831 832 static int ca8210_remove(struct spi_device *spi_device); 833 834 /** 835 * ca8210_spi_transfer_complete() - Called when a single spi transfer has 836 * completed 837 * @context: Pointer to the cas_control object for the finished transfer 838 */ 839 static void ca8210_spi_transfer_complete(void *context) 840 { 841 struct cas_control *cas_ctl = context; 842 struct ca8210_priv *priv = cas_ctl->priv; 843 bool duplex_rx = false; 844 int i; 845 u8 retry_buffer[CA8210_SPI_BUF_SIZE]; 846 847 if ( 848 cas_ctl->tx_in_buf[0] == SPI_NACK || 849 (cas_ctl->tx_in_buf[0] == SPI_IDLE && 850 cas_ctl->tx_in_buf[1] == SPI_NACK) 851 ) { 852 /* ca8210 is busy */ 853 dev_info(&priv->spi->dev, "ca8210 was busy during attempted write\n"); 854 if (cas_ctl->tx_buf[0] == SPI_IDLE) { 855 dev_warn( 856 &priv->spi->dev, 857 "IRQ servicing NACKd, dropping transfer\n" 858 ); 859 kfree(cas_ctl); 860 return; 861 } 862 if (priv->retries > 3) { 863 dev_err(&priv->spi->dev, "too many retries!\n"); 864 kfree(cas_ctl); 865 ca8210_remove(priv->spi); 866 return; 867 } 868 memcpy(retry_buffer, cas_ctl->tx_buf, CA8210_SPI_BUF_SIZE); 869 kfree(cas_ctl); 870 ca8210_spi_transfer( 871 priv->spi, 872 retry_buffer, 873 CA8210_SPI_BUF_SIZE 874 ); 875 priv->retries++; 876 dev_info(&priv->spi->dev, "retried spi write\n"); 877 return; 878 } else if ( 879 cas_ctl->tx_in_buf[0] != SPI_IDLE && 880 cas_ctl->tx_in_buf[0] != SPI_NACK 881 ) { 882 duplex_rx = true; 883 } 884 885 if (duplex_rx) { 886 dev_dbg(&priv->spi->dev, "READ CMD DURING TX\n"); 887 for (i = 0; i < cas_ctl->tx_in_buf[1] + 2; i++) 888 dev_dbg( 889 &priv->spi->dev, 890 "%#03x\n", 891 cas_ctl->tx_in_buf[i] 892 ); 893 ca8210_rx_done(cas_ctl); 894 } 895 complete(&priv->spi_transfer_complete); 896 kfree(cas_ctl); 897 priv->retries = 0; 898 } 899 900 /** 901 * ca8210_spi_transfer() - Initiate duplex spi transfer with ca8210 902 * @spi: Pointer to spi device for transfer 903 * @buf: Octet array to send 904 * @len: length of the buffer being sent 905 * 906 * Return: 0 or linux error code 907 */ 908 static int ca8210_spi_transfer( 909 struct spi_device *spi, 910 const u8 *buf, 911 size_t len 912 ) 913 { 914 int i, status = 0; 915 struct ca8210_priv *priv; 916 struct cas_control *cas_ctl; 917 918 if (!spi) { 919 dev_crit( 920 &spi->dev, 921 "NULL spi device passed to ca8210_spi_transfer\n" 922 ); 923 return -ENODEV; 924 } 925 926 priv = spi_get_drvdata(spi); 927 reinit_completion(&priv->spi_transfer_complete); 928 929 dev_dbg(&spi->dev, "ca8210_spi_transfer called\n"); 930 931 cas_ctl = kmalloc(sizeof(*cas_ctl), GFP_ATOMIC); 932 if (!cas_ctl) 933 return -ENOMEM; 934 935 cas_ctl->priv = priv; 936 memset(cas_ctl->tx_buf, SPI_IDLE, CA8210_SPI_BUF_SIZE); 937 memset(cas_ctl->tx_in_buf, SPI_IDLE, CA8210_SPI_BUF_SIZE); 938 memcpy(cas_ctl->tx_buf, buf, len); 939 940 for (i = 0; i < len; i++) 941 dev_dbg(&spi->dev, "%#03x\n", cas_ctl->tx_buf[i]); 942 943 spi_message_init(&cas_ctl->msg); 944 945 cas_ctl->transfer.tx_nbits = 1; /* 1 MOSI line */ 946 cas_ctl->transfer.rx_nbits = 1; /* 1 MISO line */ 947 cas_ctl->transfer.speed_hz = 0; /* Use device setting */ 948 cas_ctl->transfer.bits_per_word = 0; /* Use device setting */ 949 cas_ctl->transfer.tx_buf = cas_ctl->tx_buf; 950 cas_ctl->transfer.rx_buf = cas_ctl->tx_in_buf; 951 cas_ctl->transfer.delay_usecs = 0; 952 cas_ctl->transfer.cs_change = 0; 953 cas_ctl->transfer.len = sizeof(struct mac_message); 954 cas_ctl->msg.complete = ca8210_spi_transfer_complete; 955 cas_ctl->msg.context = cas_ctl; 956 957 spi_message_add_tail( 958 &cas_ctl->transfer, 959 &cas_ctl->msg 960 ); 961 962 status = spi_async(spi, &cas_ctl->msg); 963 if (status < 0) { 964 dev_crit( 965 &spi->dev, 966 "status %d from spi_sync in write\n", 967 status 968 ); 969 } 970 971 return status; 972 } 973 974 /** 975 * ca8210_spi_exchange() - Exchange API/SAP commands with the radio 976 * @buf: Octet array of command being sent downstream 977 * @len: length of buf 978 * @response: buffer for storing synchronous response 979 * @device_ref: spi_device pointer for ca8210 980 * 981 * Effectively calls ca8210_spi_transfer to write buf[] to the spi, then for 982 * synchronous commands waits for the corresponding response to be read from 983 * the spi before returning. The response is written to the response parameter. 984 * 985 * Return: 0 or linux error code 986 */ 987 static int ca8210_spi_exchange( 988 const u8 *buf, 989 size_t len, 990 u8 *response, 991 void *device_ref 992 ) 993 { 994 int status = 0; 995 struct spi_device *spi = device_ref; 996 struct ca8210_priv *priv = spi->dev.driver_data; 997 long wait_remaining; 998 999 if ((buf[0] & SPI_SYN) && response) { /* if sync wait for confirm */ 1000 reinit_completion(&priv->sync_exchange_complete); 1001 priv->sync_command_response = response; 1002 } 1003 1004 do { 1005 reinit_completion(&priv->spi_transfer_complete); 1006 status = ca8210_spi_transfer(priv->spi, buf, len); 1007 if (status) { 1008 dev_warn( 1009 &spi->dev, 1010 "spi write failed, returned %d\n", 1011 status 1012 ); 1013 if (status == -EBUSY) 1014 continue; 1015 if (((buf[0] & SPI_SYN) && response)) 1016 complete(&priv->sync_exchange_complete); 1017 goto cleanup; 1018 } 1019 1020 wait_remaining = wait_for_completion_interruptible_timeout( 1021 &priv->spi_transfer_complete, 1022 msecs_to_jiffies(1000) 1023 ); 1024 if (wait_remaining == -ERESTARTSYS) { 1025 status = -ERESTARTSYS; 1026 } else if (wait_remaining == 0) { 1027 dev_err( 1028 &spi->dev, 1029 "SPI downstream transfer timed out!\n" 1030 ); 1031 status = -ETIME; 1032 goto cleanup; 1033 } 1034 } while (status < 0); 1035 1036 if (!((buf[0] & SPI_SYN) && response)) 1037 goto cleanup; 1038 1039 wait_remaining = wait_for_completion_interruptible_timeout( 1040 &priv->sync_exchange_complete, 1041 msecs_to_jiffies(CA8210_SYNC_TIMEOUT) 1042 ); 1043 if (wait_remaining == -ERESTARTSYS) { 1044 status = -ERESTARTSYS; 1045 } else if (wait_remaining == 0) { 1046 dev_err( 1047 &spi->dev, 1048 "Synchronous confirm timeout\n" 1049 ); 1050 status = -ETIME; 1051 } 1052 1053 cleanup: 1054 priv->sync_command_response = NULL; 1055 return status; 1056 } 1057 1058 /** 1059 * ca8210_interrupt_handler() - Called when an irq is received from the ca8210 1060 * @irq: Id of the irq being handled 1061 * @dev_id: Pointer passed by the system, pointing to the ca8210's private data 1062 * 1063 * This function is called when the irq line from the ca8210 is asserted, 1064 * signifying that the ca8210 has a message to send upstream to us. Starts the 1065 * asynchronous spi read. 1066 * 1067 * Return: irq return code 1068 */ 1069 static irqreturn_t ca8210_interrupt_handler(int irq, void *dev_id) 1070 { 1071 struct ca8210_priv *priv = dev_id; 1072 int status; 1073 1074 dev_dbg(&priv->spi->dev, "irq: Interrupt occurred\n"); 1075 do { 1076 status = ca8210_spi_transfer(priv->spi, NULL, 0); 1077 if (status && (status != -EBUSY)) { 1078 dev_warn( 1079 &priv->spi->dev, 1080 "spi read failed, returned %d\n", 1081 status 1082 ); 1083 } 1084 } while (status == -EBUSY); 1085 return IRQ_HANDLED; 1086 } 1087 1088 static int (*cascoda_api_downstream)( 1089 const u8 *buf, 1090 size_t len, 1091 u8 *response, 1092 void *device_ref 1093 ) = ca8210_spi_exchange; 1094 1095 /* Cascoda API / 15.4 SAP Primitives */ 1096 1097 /** 1098 * tdme_setsfr_request_sync() - TDME_SETSFR_request/confirm according to API 1099 * @sfr_page: SFR Page 1100 * @sfr_address: SFR Address 1101 * @sfr_value: SFR Value 1102 * @device_ref: Nondescript pointer to target device 1103 * 1104 * Return: 802.15.4 status code of TDME-SETSFR.confirm 1105 */ 1106 static u8 tdme_setsfr_request_sync( 1107 u8 sfr_page, 1108 u8 sfr_address, 1109 u8 sfr_value, 1110 void *device_ref 1111 ) 1112 { 1113 int ret; 1114 struct mac_message command, response; 1115 struct spi_device *spi = device_ref; 1116 1117 command.command_id = SPI_TDME_SETSFR_REQUEST; 1118 command.length = 3; 1119 command.pdata.tdme_set_sfr_req.sfr_page = sfr_page; 1120 command.pdata.tdme_set_sfr_req.sfr_address = sfr_address; 1121 command.pdata.tdme_set_sfr_req.sfr_value = sfr_value; 1122 response.command_id = SPI_IDLE; 1123 ret = cascoda_api_downstream( 1124 &command.command_id, 1125 command.length + 2, 1126 &response.command_id, 1127 device_ref 1128 ); 1129 if (ret) { 1130 dev_crit(&spi->dev, "cascoda_api_downstream returned %d", ret); 1131 return MAC_SYSTEM_ERROR; 1132 } 1133 1134 if (response.command_id != SPI_TDME_SETSFR_CONFIRM) { 1135 dev_crit( 1136 &spi->dev, 1137 "sync response to SPI_TDME_SETSFR_REQUEST was not SPI_TDME_SETSFR_CONFIRM, it was %d\n", 1138 response.command_id 1139 ); 1140 return MAC_SYSTEM_ERROR; 1141 } 1142 1143 return response.pdata.tdme_set_sfr_cnf.status; 1144 } 1145 1146 /** 1147 * tdme_chipinit() - TDME Chip Register Default Initialisation Macro 1148 * @device_ref: Nondescript pointer to target device 1149 * 1150 * Return: 802.15.4 status code of API calls 1151 */ 1152 static u8 tdme_chipinit(void *device_ref) 1153 { 1154 u8 status = MAC_SUCCESS; 1155 u8 sfr_address; 1156 struct spi_device *spi = device_ref; 1157 struct preamble_cfg_sfr pre_cfg_value = { 1158 .timeout_symbols = 3, 1159 .acquisition_symbols = 3, 1160 .search_symbols = 1, 1161 }; 1162 /* LNA Gain Settings */ 1163 status = tdme_setsfr_request_sync( 1164 1, (sfr_address = CA8210_SFR_LNAGX40), 1165 LNAGX40_DEFAULT_GAIN, device_ref); 1166 if (status) 1167 goto finish; 1168 status = tdme_setsfr_request_sync( 1169 1, (sfr_address = CA8210_SFR_LNAGX41), 1170 LNAGX41_DEFAULT_GAIN, device_ref); 1171 if (status) 1172 goto finish; 1173 status = tdme_setsfr_request_sync( 1174 1, (sfr_address = CA8210_SFR_LNAGX42), 1175 LNAGX42_DEFAULT_GAIN, device_ref); 1176 if (status) 1177 goto finish; 1178 status = tdme_setsfr_request_sync( 1179 1, (sfr_address = CA8210_SFR_LNAGX43), 1180 LNAGX43_DEFAULT_GAIN, device_ref); 1181 if (status) 1182 goto finish; 1183 status = tdme_setsfr_request_sync( 1184 1, (sfr_address = CA8210_SFR_LNAGX44), 1185 LNAGX44_DEFAULT_GAIN, device_ref); 1186 if (status) 1187 goto finish; 1188 status = tdme_setsfr_request_sync( 1189 1, (sfr_address = CA8210_SFR_LNAGX45), 1190 LNAGX45_DEFAULT_GAIN, device_ref); 1191 if (status) 1192 goto finish; 1193 status = tdme_setsfr_request_sync( 1194 1, (sfr_address = CA8210_SFR_LNAGX46), 1195 LNAGX46_DEFAULT_GAIN, device_ref); 1196 if (status) 1197 goto finish; 1198 status = tdme_setsfr_request_sync( 1199 1, (sfr_address = CA8210_SFR_LNAGX47), 1200 LNAGX47_DEFAULT_GAIN, device_ref); 1201 if (status) 1202 goto finish; 1203 /* Preamble Timing Config */ 1204 status = tdme_setsfr_request_sync( 1205 1, (sfr_address = CA8210_SFR_PRECFG), 1206 *((u8 *)&pre_cfg_value), device_ref); 1207 if (status) 1208 goto finish; 1209 /* Preamble Threshold High */ 1210 status = tdme_setsfr_request_sync( 1211 1, (sfr_address = CA8210_SFR_PTHRH), 1212 PTHRH_DEFAULT_THRESHOLD, device_ref); 1213 if (status) 1214 goto finish; 1215 /* Tx Output Power 8 dBm */ 1216 status = tdme_setsfr_request_sync( 1217 0, (sfr_address = CA8210_SFR_PACFGIB), 1218 PACFGIB_DEFAULT_CURRENT, device_ref); 1219 if (status) 1220 goto finish; 1221 1222 finish: 1223 if (status != MAC_SUCCESS) { 1224 dev_err( 1225 &spi->dev, 1226 "failed to set sfr at %#03x, status = %#03x\n", 1227 sfr_address, 1228 status 1229 ); 1230 } 1231 return status; 1232 } 1233 1234 /** 1235 * tdme_channelinit() - TDME Channel Register Default Initialisation Macro (Tx) 1236 * @channel: 802.15.4 channel to initialise chip for 1237 * @device_ref: Nondescript pointer to target device 1238 * 1239 * Return: 802.15.4 status code of API calls 1240 */ 1241 static u8 tdme_channelinit(u8 channel, void *device_ref) 1242 { 1243 /* Transceiver front-end local oscillator tx two-point calibration 1244 * value. Tuned for the hardware. 1245 */ 1246 u8 txcalval; 1247 1248 if (channel >= 25) 1249 txcalval = 0xA7; 1250 else if (channel >= 23) 1251 txcalval = 0xA8; 1252 else if (channel >= 22) 1253 txcalval = 0xA9; 1254 else if (channel >= 20) 1255 txcalval = 0xAA; 1256 else if (channel >= 17) 1257 txcalval = 0xAB; 1258 else if (channel >= 16) 1259 txcalval = 0xAC; 1260 else if (channel >= 14) 1261 txcalval = 0xAD; 1262 else if (channel >= 12) 1263 txcalval = 0xAE; 1264 else 1265 txcalval = 0xAF; 1266 1267 return tdme_setsfr_request_sync( 1268 1, 1269 CA8210_SFR_LOTXCAL, 1270 txcalval, 1271 device_ref 1272 ); /* LO Tx Cal */ 1273 } 1274 1275 /** 1276 * tdme_checkpibattribute() - Checks Attribute Values that are not checked in 1277 * MAC 1278 * @pib_attribute: Attribute Number 1279 * @pib_attribute_length: Attribute length 1280 * @pib_attribute_value: Pointer to Attribute Value 1281 * @device_ref: Nondescript pointer to target device 1282 * 1283 * Return: 802.15.4 status code of checks 1284 */ 1285 static u8 tdme_checkpibattribute( 1286 u8 pib_attribute, 1287 u8 pib_attribute_length, 1288 const void *pib_attribute_value 1289 ) 1290 { 1291 u8 status = MAC_SUCCESS; 1292 u8 value; 1293 1294 value = *((u8 *)pib_attribute_value); 1295 1296 switch (pib_attribute) { 1297 /* PHY */ 1298 case PHY_TRANSMIT_POWER: 1299 if (value > 0x3F) 1300 status = MAC_INVALID_PARAMETER; 1301 break; 1302 case PHY_CCA_MODE: 1303 if (value > 0x03) 1304 status = MAC_INVALID_PARAMETER; 1305 break; 1306 /* MAC */ 1307 case MAC_BATT_LIFE_EXT_PERIODS: 1308 if ((value < 6) || (value > 41)) 1309 status = MAC_INVALID_PARAMETER; 1310 break; 1311 case MAC_BEACON_PAYLOAD: 1312 if (pib_attribute_length > MAX_BEACON_PAYLOAD_LENGTH) 1313 status = MAC_INVALID_PARAMETER; 1314 break; 1315 case MAC_BEACON_PAYLOAD_LENGTH: 1316 if (value > MAX_BEACON_PAYLOAD_LENGTH) 1317 status = MAC_INVALID_PARAMETER; 1318 break; 1319 case MAC_BEACON_ORDER: 1320 if (value > 15) 1321 status = MAC_INVALID_PARAMETER; 1322 break; 1323 case MAC_MAX_BE: 1324 if ((value < 3) || (value > 8)) 1325 status = MAC_INVALID_PARAMETER; 1326 break; 1327 case MAC_MAX_CSMA_BACKOFFS: 1328 if (value > 5) 1329 status = MAC_INVALID_PARAMETER; 1330 break; 1331 case MAC_MAX_FRAME_RETRIES: 1332 if (value > 7) 1333 status = MAC_INVALID_PARAMETER; 1334 break; 1335 case MAC_MIN_BE: 1336 if (value > 8) 1337 status = MAC_INVALID_PARAMETER; 1338 break; 1339 case MAC_RESPONSE_WAIT_TIME: 1340 if ((value < 2) || (value > 64)) 1341 status = MAC_INVALID_PARAMETER; 1342 break; 1343 case MAC_SUPERFRAME_ORDER: 1344 if (value > 15) 1345 status = MAC_INVALID_PARAMETER; 1346 break; 1347 /* boolean */ 1348 case MAC_ASSOCIATED_PAN_COORD: 1349 case MAC_ASSOCIATION_PERMIT: 1350 case MAC_AUTO_REQUEST: 1351 case MAC_BATT_LIFE_EXT: 1352 case MAC_GTS_PERMIT: 1353 case MAC_PROMISCUOUS_MODE: 1354 case MAC_RX_ON_WHEN_IDLE: 1355 case MAC_SECURITY_ENABLED: 1356 if (value > 1) 1357 status = MAC_INVALID_PARAMETER; 1358 break; 1359 /* MAC SEC */ 1360 case MAC_AUTO_REQUEST_SECURITY_LEVEL: 1361 if (value > 7) 1362 status = MAC_INVALID_PARAMETER; 1363 break; 1364 case MAC_AUTO_REQUEST_KEY_ID_MODE: 1365 if (value > 3) 1366 status = MAC_INVALID_PARAMETER; 1367 break; 1368 default: 1369 break; 1370 } 1371 1372 return status; 1373 } 1374 1375 /** 1376 * tdme_settxpower() - Sets the tx power for MLME_SET phyTransmitPower 1377 * @txp: Transmit Power 1378 * @device_ref: Nondescript pointer to target device 1379 * 1380 * Normalised to 802.15.4 Definition (6-bit, signed): 1381 * Bit 7-6: not used 1382 * Bit 5-0: tx power (-32 - +31 dB) 1383 * 1384 * Return: 802.15.4 status code of api calls 1385 */ 1386 static u8 tdme_settxpower(u8 txp, void *device_ref) 1387 { 1388 u8 status; 1389 s8 txp_val; 1390 u8 txp_ext; 1391 union pa_cfg_sfr pa_cfg_val; 1392 1393 /* extend from 6 to 8 bit */ 1394 txp_ext = 0x3F & txp; 1395 if (txp_ext & 0x20) 1396 txp_ext += 0xC0; 1397 txp_val = (s8)txp_ext; 1398 1399 if (CA8210_MAC_MPW) { 1400 if (txp_val > 0) { 1401 /* 8 dBm: ptrim = 5, itrim = +3 => +4 dBm */ 1402 pa_cfg_val.bias_current_trim = 3; 1403 pa_cfg_val.buffer_capacitor_trim = 5; 1404 pa_cfg_val.boost = 1; 1405 } else { 1406 /* 0 dBm: ptrim = 7, itrim = +3 => -6 dBm */ 1407 pa_cfg_val.bias_current_trim = 3; 1408 pa_cfg_val.buffer_capacitor_trim = 7; 1409 pa_cfg_val.boost = 0; 1410 } 1411 /* write PACFG */ 1412 status = tdme_setsfr_request_sync( 1413 0, 1414 CA8210_SFR_PACFG, 1415 pa_cfg_val.paib, 1416 device_ref 1417 ); 1418 } else { 1419 /* Look-Up Table for Setting Current and Frequency Trim values 1420 * for desired Output Power 1421 */ 1422 if (txp_val > 8) { 1423 pa_cfg_val.paib = 0x3F; 1424 } else if (txp_val == 8) { 1425 pa_cfg_val.paib = 0x32; 1426 } else if (txp_val == 7) { 1427 pa_cfg_val.paib = 0x22; 1428 } else if (txp_val == 6) { 1429 pa_cfg_val.paib = 0x18; 1430 } else if (txp_val == 5) { 1431 pa_cfg_val.paib = 0x10; 1432 } else if (txp_val == 4) { 1433 pa_cfg_val.paib = 0x0C; 1434 } else if (txp_val == 3) { 1435 pa_cfg_val.paib = 0x08; 1436 } else if (txp_val == 2) { 1437 pa_cfg_val.paib = 0x05; 1438 } else if (txp_val == 1) { 1439 pa_cfg_val.paib = 0x03; 1440 } else if (txp_val == 0) { 1441 pa_cfg_val.paib = 0x01; 1442 } else { /* < 0 */ 1443 pa_cfg_val.paib = 0x00; 1444 } 1445 /* write PACFGIB */ 1446 status = tdme_setsfr_request_sync( 1447 0, 1448 CA8210_SFR_PACFGIB, 1449 pa_cfg_val.paib, 1450 device_ref 1451 ); 1452 } 1453 1454 return status; 1455 } 1456 1457 /** 1458 * mcps_data_request() - mcps_data_request (Send Data) according to API Spec 1459 * @src_addr_mode: Source Addressing Mode 1460 * @dst_address_mode: Destination Addressing Mode 1461 * @dst_pan_id: Destination PAN ID 1462 * @dst_addr: Pointer to Destination Address 1463 * @msdu_length: length of Data 1464 * @msdu: Pointer to Data 1465 * @msdu_handle: Handle of Data 1466 * @tx_options: Tx Options Bit Field 1467 * @security: Pointer to Security Structure or NULL 1468 * @device_ref: Nondescript pointer to target device 1469 * 1470 * Return: 802.15.4 status code of action 1471 */ 1472 static u8 mcps_data_request( 1473 u8 src_addr_mode, 1474 u8 dst_address_mode, 1475 u16 dst_pan_id, 1476 union macaddr *dst_addr, 1477 u8 msdu_length, 1478 u8 *msdu, 1479 u8 msdu_handle, 1480 u8 tx_options, 1481 struct secspec *security, 1482 void *device_ref 1483 ) 1484 { 1485 struct secspec *psec; 1486 struct mac_message command; 1487 1488 command.command_id = SPI_MCPS_DATA_REQUEST; 1489 command.pdata.data_req.src_addr_mode = src_addr_mode; 1490 command.pdata.data_req.dst.mode = dst_address_mode; 1491 if (dst_address_mode != MAC_MODE_NO_ADDR) { 1492 command.pdata.data_req.dst.pan_id[0] = LS_BYTE(dst_pan_id); 1493 command.pdata.data_req.dst.pan_id[1] = MS_BYTE(dst_pan_id); 1494 if (dst_address_mode == MAC_MODE_SHORT_ADDR) { 1495 command.pdata.data_req.dst.address[0] = LS_BYTE( 1496 dst_addr->short_address 1497 ); 1498 command.pdata.data_req.dst.address[1] = MS_BYTE( 1499 dst_addr->short_address 1500 ); 1501 } else { /* MAC_MODE_LONG_ADDR*/ 1502 memcpy( 1503 command.pdata.data_req.dst.address, 1504 dst_addr->ieee_address, 1505 8 1506 ); 1507 } 1508 } 1509 command.pdata.data_req.msdu_length = msdu_length; 1510 command.pdata.data_req.msdu_handle = msdu_handle; 1511 command.pdata.data_req.tx_options = tx_options; 1512 memcpy(command.pdata.data_req.msdu, msdu, msdu_length); 1513 psec = (struct secspec *)(command.pdata.data_req.msdu + msdu_length); 1514 command.length = sizeof(struct mcps_data_request_pset) - 1515 MAX_DATA_SIZE + msdu_length; 1516 if (!security || (security->security_level == 0)) { 1517 psec->security_level = 0; 1518 command.length += 1; 1519 } else { 1520 *psec = *security; 1521 command.length += sizeof(struct secspec); 1522 } 1523 1524 if (ca8210_spi_transfer(device_ref, &command.command_id, 1525 command.length + 2)) 1526 return MAC_SYSTEM_ERROR; 1527 1528 return MAC_SUCCESS; 1529 } 1530 1531 /** 1532 * mlme_reset_request_sync() - MLME_RESET_request/confirm according to API Spec 1533 * @set_default_pib: Set defaults in PIB 1534 * @device_ref: Nondescript pointer to target device 1535 * 1536 * Return: 802.15.4 status code of MLME-RESET.confirm 1537 */ 1538 static u8 mlme_reset_request_sync( 1539 u8 set_default_pib, 1540 void *device_ref 1541 ) 1542 { 1543 u8 status; 1544 struct mac_message command, response; 1545 struct spi_device *spi = device_ref; 1546 1547 command.command_id = SPI_MLME_RESET_REQUEST; 1548 command.length = 1; 1549 command.pdata.u8param = set_default_pib; 1550 1551 if (cascoda_api_downstream( 1552 &command.command_id, 1553 command.length + 2, 1554 &response.command_id, 1555 device_ref)) { 1556 dev_err(&spi->dev, "cascoda_api_downstream failed\n"); 1557 return MAC_SYSTEM_ERROR; 1558 } 1559 1560 if (response.command_id != SPI_MLME_RESET_CONFIRM) 1561 return MAC_SYSTEM_ERROR; 1562 1563 status = response.pdata.status; 1564 1565 /* reset COORD Bit for Channel Filtering as Coordinator */ 1566 if (CA8210_MAC_WORKAROUNDS && set_default_pib && (!status)) { 1567 status = tdme_setsfr_request_sync( 1568 0, 1569 CA8210_SFR_MACCON, 1570 0, 1571 device_ref 1572 ); 1573 } 1574 1575 return status; 1576 } 1577 1578 /** 1579 * mlme_set_request_sync() - MLME_SET_request/confirm according to API Spec 1580 * @pib_attribute: Attribute Number 1581 * @pib_attribute_index: Index within Attribute if an Array 1582 * @pib_attribute_length: Attribute length 1583 * @pib_attribute_value: Pointer to Attribute Value 1584 * @device_ref: Nondescript pointer to target device 1585 * 1586 * Return: 802.15.4 status code of MLME-SET.confirm 1587 */ 1588 static u8 mlme_set_request_sync( 1589 u8 pib_attribute, 1590 u8 pib_attribute_index, 1591 u8 pib_attribute_length, 1592 const void *pib_attribute_value, 1593 void *device_ref 1594 ) 1595 { 1596 u8 status; 1597 struct mac_message command, response; 1598 1599 /* pre-check the validity of pib_attribute values that are not checked 1600 * in MAC 1601 */ 1602 if (tdme_checkpibattribute( 1603 pib_attribute, pib_attribute_length, pib_attribute_value)) { 1604 return MAC_INVALID_PARAMETER; 1605 } 1606 1607 if (pib_attribute == PHY_CURRENT_CHANNEL) { 1608 status = tdme_channelinit( 1609 *((u8 *)pib_attribute_value), 1610 device_ref 1611 ); 1612 if (status) 1613 return status; 1614 } 1615 1616 if (pib_attribute == PHY_TRANSMIT_POWER) { 1617 return tdme_settxpower( 1618 *((u8 *)pib_attribute_value), 1619 device_ref 1620 ); 1621 } 1622 1623 command.command_id = SPI_MLME_SET_REQUEST; 1624 command.length = sizeof(struct mlme_set_request_pset) - 1625 MAX_ATTRIBUTE_SIZE + pib_attribute_length; 1626 command.pdata.set_req.pib_attribute = pib_attribute; 1627 command.pdata.set_req.pib_attribute_index = pib_attribute_index; 1628 command.pdata.set_req.pib_attribute_length = pib_attribute_length; 1629 memcpy( 1630 command.pdata.set_req.pib_attribute_value, 1631 pib_attribute_value, 1632 pib_attribute_length 1633 ); 1634 1635 if (cascoda_api_downstream( 1636 &command.command_id, 1637 command.length + 2, 1638 &response.command_id, 1639 device_ref)) { 1640 return MAC_SYSTEM_ERROR; 1641 } 1642 1643 if (response.command_id != SPI_MLME_SET_CONFIRM) 1644 return MAC_SYSTEM_ERROR; 1645 1646 return response.pdata.status; 1647 } 1648 1649 /** 1650 * hwme_set_request_sync() - HWME_SET_request/confirm according to API Spec 1651 * @hw_attribute: Attribute Number 1652 * @hw_attribute_length: Attribute length 1653 * @hw_attribute_value: Pointer to Attribute Value 1654 * @device_ref: Nondescript pointer to target device 1655 * 1656 * Return: 802.15.4 status code of HWME-SET.confirm 1657 */ 1658 static u8 hwme_set_request_sync( 1659 u8 hw_attribute, 1660 u8 hw_attribute_length, 1661 u8 *hw_attribute_value, 1662 void *device_ref 1663 ) 1664 { 1665 struct mac_message command, response; 1666 1667 command.command_id = SPI_HWME_SET_REQUEST; 1668 command.length = 2 + hw_attribute_length; 1669 command.pdata.hwme_set_req.hw_attribute = hw_attribute; 1670 command.pdata.hwme_set_req.hw_attribute_length = hw_attribute_length; 1671 memcpy( 1672 command.pdata.hwme_set_req.hw_attribute_value, 1673 hw_attribute_value, 1674 hw_attribute_length 1675 ); 1676 1677 if (cascoda_api_downstream( 1678 &command.command_id, 1679 command.length + 2, 1680 &response.command_id, 1681 device_ref)) { 1682 return MAC_SYSTEM_ERROR; 1683 } 1684 1685 if (response.command_id != SPI_HWME_SET_CONFIRM) 1686 return MAC_SYSTEM_ERROR; 1687 1688 return response.pdata.hwme_set_cnf.status; 1689 } 1690 1691 /** 1692 * hwme_get_request_sync() - HWME_GET_request/confirm according to API Spec 1693 * @hw_attribute: Attribute Number 1694 * @hw_attribute_length: Attribute length 1695 * @hw_attribute_value: Pointer to Attribute Value 1696 * @device_ref: Nondescript pointer to target device 1697 * 1698 * Return: 802.15.4 status code of HWME-GET.confirm 1699 */ 1700 static u8 hwme_get_request_sync( 1701 u8 hw_attribute, 1702 u8 *hw_attribute_length, 1703 u8 *hw_attribute_value, 1704 void *device_ref 1705 ) 1706 { 1707 struct mac_message command, response; 1708 1709 command.command_id = SPI_HWME_GET_REQUEST; 1710 command.length = 1; 1711 command.pdata.hwme_get_req.hw_attribute = hw_attribute; 1712 1713 if (cascoda_api_downstream( 1714 &command.command_id, 1715 command.length + 2, 1716 &response.command_id, 1717 device_ref)) { 1718 return MAC_SYSTEM_ERROR; 1719 } 1720 1721 if (response.command_id != SPI_HWME_GET_CONFIRM) 1722 return MAC_SYSTEM_ERROR; 1723 1724 if (response.pdata.hwme_get_cnf.status == MAC_SUCCESS) { 1725 *hw_attribute_length = 1726 response.pdata.hwme_get_cnf.hw_attribute_length; 1727 memcpy( 1728 hw_attribute_value, 1729 response.pdata.hwme_get_cnf.hw_attribute_value, 1730 *hw_attribute_length 1731 ); 1732 } 1733 1734 return response.pdata.hwme_get_cnf.status; 1735 } 1736 1737 /* Network driver operation */ 1738 1739 /** 1740 * ca8210_async_xmit_complete() - Called to announce that an asynchronous 1741 * transmission has finished 1742 * @hw: ieee802154_hw of ca8210 that has finished exchange 1743 * @msduhandle: Identifier of transmission that has completed 1744 * @status: Returned 802.15.4 status code of the transmission 1745 * 1746 * Return: 0 or linux error code 1747 */ 1748 static int ca8210_async_xmit_complete( 1749 struct ieee802154_hw *hw, 1750 u8 msduhandle, 1751 u8 status) 1752 { 1753 struct ca8210_priv *priv = hw->priv; 1754 1755 if (priv->nextmsduhandle != msduhandle) { 1756 dev_err( 1757 &priv->spi->dev, 1758 "Unexpected msdu_handle on data confirm, Expected %d, got %d\n", 1759 priv->nextmsduhandle, 1760 msduhandle 1761 ); 1762 return -EIO; 1763 } 1764 1765 priv->async_tx_pending = false; 1766 priv->nextmsduhandle++; 1767 1768 if (status) { 1769 dev_err( 1770 &priv->spi->dev, 1771 "Link transmission unsuccessful, status = %d\n", 1772 status 1773 ); 1774 if (status != MAC_TRANSACTION_OVERFLOW) { 1775 ieee802154_wake_queue(priv->hw); 1776 return 0; 1777 } 1778 } 1779 ieee802154_xmit_complete(priv->hw, priv->tx_skb, true); 1780 1781 return 0; 1782 } 1783 1784 /** 1785 * ca8210_skb_rx() - Contructs a properly framed socket buffer from a received 1786 * MCPS_DATA_indication 1787 * @hw: ieee802154_hw that MCPS_DATA_indication was received by 1788 * @len: length of MCPS_DATA_indication 1789 * @data_ind: Octet array of MCPS_DATA_indication 1790 * 1791 * Called by the spi driver whenever a SAP command is received, this function 1792 * will ascertain whether the command is of interest to the network driver and 1793 * take necessary action. 1794 * 1795 * Return: 0 or linux error code 1796 */ 1797 static int ca8210_skb_rx( 1798 struct ieee802154_hw *hw, 1799 size_t len, 1800 u8 *data_ind 1801 ) 1802 { 1803 struct ieee802154_hdr hdr; 1804 int msdulen; 1805 int hlen; 1806 u8 mpdulinkquality = data_ind[23]; 1807 struct sk_buff *skb; 1808 struct ca8210_priv *priv = hw->priv; 1809 1810 /* Allocate mtu size buffer for every rx packet */ 1811 skb = dev_alloc_skb(IEEE802154_MTU + sizeof(hdr)); 1812 if (!skb) 1813 return -ENOMEM; 1814 1815 skb_reserve(skb, sizeof(hdr)); 1816 1817 msdulen = data_ind[22]; /* msdu_length */ 1818 if (msdulen > IEEE802154_MTU) { 1819 dev_err( 1820 &priv->spi->dev, 1821 "received erroneously large msdu length!\n" 1822 ); 1823 kfree_skb(skb); 1824 return -EMSGSIZE; 1825 } 1826 dev_dbg(&priv->spi->dev, "skb buffer length = %d\n", msdulen); 1827 1828 if (priv->promiscuous) 1829 goto copy_payload; 1830 1831 /* Populate hdr */ 1832 hdr.sec.level = data_ind[29 + msdulen]; 1833 dev_dbg(&priv->spi->dev, "security level: %#03x\n", hdr.sec.level); 1834 if (hdr.sec.level > 0) { 1835 hdr.sec.key_id_mode = data_ind[30 + msdulen]; 1836 memcpy(&hdr.sec.extended_src, &data_ind[31 + msdulen], 8); 1837 hdr.sec.key_id = data_ind[39 + msdulen]; 1838 } 1839 hdr.source.mode = data_ind[0]; 1840 dev_dbg(&priv->spi->dev, "srcAddrMode: %#03x\n", hdr.source.mode); 1841 hdr.source.pan_id = *(u16 *)&data_ind[1]; 1842 dev_dbg(&priv->spi->dev, "srcPanId: %#06x\n", hdr.source.pan_id); 1843 memcpy(&hdr.source.extended_addr, &data_ind[3], 8); 1844 hdr.dest.mode = data_ind[11]; 1845 dev_dbg(&priv->spi->dev, "dstAddrMode: %#03x\n", hdr.dest.mode); 1846 hdr.dest.pan_id = *(u16 *)&data_ind[12]; 1847 dev_dbg(&priv->spi->dev, "dstPanId: %#06x\n", hdr.dest.pan_id); 1848 memcpy(&hdr.dest.extended_addr, &data_ind[14], 8); 1849 1850 /* Fill in FC implicitly */ 1851 hdr.fc.type = 1; /* Data frame */ 1852 if (hdr.sec.level) 1853 hdr.fc.security_enabled = 1; 1854 else 1855 hdr.fc.security_enabled = 0; 1856 if (data_ind[1] != data_ind[12] || data_ind[2] != data_ind[13]) 1857 hdr.fc.intra_pan = 1; 1858 else 1859 hdr.fc.intra_pan = 0; 1860 hdr.fc.dest_addr_mode = hdr.dest.mode; 1861 hdr.fc.source_addr_mode = hdr.source.mode; 1862 1863 /* Add hdr to front of buffer */ 1864 hlen = ieee802154_hdr_push(skb, &hdr); 1865 1866 if (hlen < 0) { 1867 dev_crit(&priv->spi->dev, "failed to push mac hdr onto skb!\n"); 1868 kfree_skb(skb); 1869 return hlen; 1870 } 1871 1872 skb_reset_mac_header(skb); 1873 skb->mac_len = hlen; 1874 1875 copy_payload: 1876 /* Add <msdulen> bytes of space to the back of the buffer */ 1877 /* Copy msdu to skb */ 1878 skb_put_data(skb, &data_ind[29], msdulen); 1879 1880 ieee802154_rx_irqsafe(hw, skb, mpdulinkquality); 1881 return 0; 1882 } 1883 1884 /** 1885 * ca8210_net_rx() - Acts upon received SAP commands relevant to the network 1886 * driver 1887 * @hw: ieee802154_hw that command was received by 1888 * @command: Octet array of received command 1889 * @len: length of the received command 1890 * 1891 * Called by the spi driver whenever a SAP command is received, this function 1892 * will ascertain whether the command is of interest to the network driver and 1893 * take necessary action. 1894 * 1895 * Return: 0 or linux error code 1896 */ 1897 static int ca8210_net_rx(struct ieee802154_hw *hw, u8 *command, size_t len) 1898 { 1899 struct ca8210_priv *priv = hw->priv; 1900 unsigned long flags; 1901 u8 status; 1902 1903 dev_dbg(&priv->spi->dev, "ca8210_net_rx(), CmdID = %d\n", command[0]); 1904 1905 if (command[0] == SPI_MCPS_DATA_INDICATION) { 1906 /* Received data */ 1907 spin_lock_irqsave(&priv->lock, flags); 1908 if (command[26] == priv->last_dsn) { 1909 dev_dbg( 1910 &priv->spi->dev, 1911 "DSN %d resend received, ignoring...\n", 1912 command[26] 1913 ); 1914 spin_unlock_irqrestore(&priv->lock, flags); 1915 return 0; 1916 } 1917 priv->last_dsn = command[26]; 1918 spin_unlock_irqrestore(&priv->lock, flags); 1919 return ca8210_skb_rx(hw, len - 2, command + 2); 1920 } else if (command[0] == SPI_MCPS_DATA_CONFIRM) { 1921 status = command[3]; 1922 if (priv->async_tx_pending) { 1923 return ca8210_async_xmit_complete( 1924 hw, 1925 command[2], 1926 status 1927 ); 1928 } 1929 } 1930 1931 return 0; 1932 } 1933 1934 /** 1935 * ca8210_skb_tx() - Transmits a given socket buffer using the ca8210 1936 * @skb: Socket buffer to transmit 1937 * @msduhandle: Data identifier to pass to the 802.15.4 MAC 1938 * @priv: Pointer to private data section of target ca8210 1939 * 1940 * Return: 0 or linux error code 1941 */ 1942 static int ca8210_skb_tx( 1943 struct sk_buff *skb, 1944 u8 msduhandle, 1945 struct ca8210_priv *priv 1946 ) 1947 { 1948 int status; 1949 struct ieee802154_hdr header = { 0 }; 1950 struct secspec secspec; 1951 unsigned int mac_len; 1952 1953 dev_dbg(&priv->spi->dev, "ca8210_skb_tx() called\n"); 1954 1955 /* Get addressing info from skb - ieee802154 layer creates a full 1956 * packet 1957 */ 1958 mac_len = ieee802154_hdr_peek_addrs(skb, &header); 1959 1960 secspec.security_level = header.sec.level; 1961 secspec.key_id_mode = header.sec.key_id_mode; 1962 if (secspec.key_id_mode == 2) 1963 memcpy(secspec.key_source, &header.sec.short_src, 4); 1964 else if (secspec.key_id_mode == 3) 1965 memcpy(secspec.key_source, &header.sec.extended_src, 8); 1966 secspec.key_index = header.sec.key_id; 1967 1968 /* Pass to Cascoda API */ 1969 status = mcps_data_request( 1970 header.source.mode, 1971 header.dest.mode, 1972 header.dest.pan_id, 1973 (union macaddr *)&header.dest.extended_addr, 1974 skb->len - mac_len, 1975 &skb->data[mac_len], 1976 msduhandle, 1977 header.fc.ack_request, 1978 &secspec, 1979 priv->spi 1980 ); 1981 return link_to_linux_err(status); 1982 } 1983 1984 /** 1985 * ca8210_start() - Starts the network driver 1986 * @hw: ieee802154_hw of ca8210 being started 1987 * 1988 * Return: 0 or linux error code 1989 */ 1990 static int ca8210_start(struct ieee802154_hw *hw) 1991 { 1992 int status; 1993 u8 rx_on_when_idle; 1994 u8 lqi_threshold = 0; 1995 struct ca8210_priv *priv = hw->priv; 1996 1997 priv->last_dsn = -1; 1998 /* Turn receiver on when idle for now just to test rx */ 1999 rx_on_when_idle = 1; 2000 status = mlme_set_request_sync( 2001 MAC_RX_ON_WHEN_IDLE, 2002 0, 2003 1, 2004 &rx_on_when_idle, 2005 priv->spi 2006 ); 2007 if (status) { 2008 dev_crit( 2009 &priv->spi->dev, 2010 "Setting rx_on_when_idle failed, status = %d\n", 2011 status 2012 ); 2013 return link_to_linux_err(status); 2014 } 2015 status = hwme_set_request_sync( 2016 HWME_LQILIMIT, 2017 1, 2018 &lqi_threshold, 2019 priv->spi 2020 ); 2021 if (status) { 2022 dev_crit( 2023 &priv->spi->dev, 2024 "Setting lqilimit failed, status = %d\n", 2025 status 2026 ); 2027 return link_to_linux_err(status); 2028 } 2029 2030 return 0; 2031 } 2032 2033 /** 2034 * ca8210_stop() - Stops the network driver 2035 * @hw: ieee802154_hw of ca8210 being stopped 2036 * 2037 * Return: 0 or linux error code 2038 */ 2039 static void ca8210_stop(struct ieee802154_hw *hw) 2040 { 2041 } 2042 2043 /** 2044 * ca8210_xmit_async() - Asynchronously transmits a given socket buffer using 2045 * the ca8210 2046 * @hw: ieee802154_hw of ca8210 to transmit from 2047 * @skb: Socket buffer to transmit 2048 * 2049 * Return: 0 or linux error code 2050 */ 2051 static int ca8210_xmit_async(struct ieee802154_hw *hw, struct sk_buff *skb) 2052 { 2053 struct ca8210_priv *priv = hw->priv; 2054 int status; 2055 2056 dev_dbg(&priv->spi->dev, "calling ca8210_xmit_async()\n"); 2057 2058 priv->tx_skb = skb; 2059 priv->async_tx_pending = true; 2060 status = ca8210_skb_tx(skb, priv->nextmsduhandle, priv); 2061 return status; 2062 } 2063 2064 /** 2065 * ca8210_get_ed() - Returns the measured energy on the current channel at this 2066 * instant in time 2067 * @hw: ieee802154_hw of target ca8210 2068 * @level: Measured Energy Detect level 2069 * 2070 * Return: 0 or linux error code 2071 */ 2072 static int ca8210_get_ed(struct ieee802154_hw *hw, u8 *level) 2073 { 2074 u8 lenvar; 2075 struct ca8210_priv *priv = hw->priv; 2076 2077 return link_to_linux_err( 2078 hwme_get_request_sync(HWME_EDVALUE, &lenvar, level, priv->spi) 2079 ); 2080 } 2081 2082 /** 2083 * ca8210_set_channel() - Sets the current operating 802.15.4 channel of the 2084 * ca8210 2085 * @hw: ieee802154_hw of target ca8210 2086 * @page: Channel page to set 2087 * @channel: Channel number to set 2088 * 2089 * Return: 0 or linux error code 2090 */ 2091 static int ca8210_set_channel( 2092 struct ieee802154_hw *hw, 2093 u8 page, 2094 u8 channel 2095 ) 2096 { 2097 u8 status; 2098 struct ca8210_priv *priv = hw->priv; 2099 2100 status = mlme_set_request_sync( 2101 PHY_CURRENT_CHANNEL, 2102 0, 2103 1, 2104 &channel, 2105 priv->spi 2106 ); 2107 if (status) { 2108 dev_err( 2109 &priv->spi->dev, 2110 "error setting channel, MLME-SET.confirm status = %d\n", 2111 status 2112 ); 2113 } 2114 return link_to_linux_err(status); 2115 } 2116 2117 /** 2118 * ca8210_set_hw_addr_filt() - Sets the address filtering parameters of the 2119 * ca8210 2120 * @hw: ieee802154_hw of target ca8210 2121 * @filt: Filtering parameters 2122 * @changed: Bitmap representing which parameters to change 2123 * 2124 * Effectively just sets the actual addressing information identifying this node 2125 * as all filtering is performed by the ca8210 as detailed in the IEEE 802.15.4 2126 * 2006 specification. 2127 * 2128 * Return: 0 or linux error code 2129 */ 2130 static int ca8210_set_hw_addr_filt( 2131 struct ieee802154_hw *hw, 2132 struct ieee802154_hw_addr_filt *filt, 2133 unsigned long changed 2134 ) 2135 { 2136 u8 status = 0; 2137 struct ca8210_priv *priv = hw->priv; 2138 2139 if (changed & IEEE802154_AFILT_PANID_CHANGED) { 2140 status = mlme_set_request_sync( 2141 MAC_PAN_ID, 2142 0, 2143 2, 2144 &filt->pan_id, priv->spi 2145 ); 2146 if (status) { 2147 dev_err( 2148 &priv->spi->dev, 2149 "error setting pan id, MLME-SET.confirm status = %d", 2150 status 2151 ); 2152 return link_to_linux_err(status); 2153 } 2154 } 2155 if (changed & IEEE802154_AFILT_SADDR_CHANGED) { 2156 status = mlme_set_request_sync( 2157 MAC_SHORT_ADDRESS, 2158 0, 2159 2, 2160 &filt->short_addr, priv->spi 2161 ); 2162 if (status) { 2163 dev_err( 2164 &priv->spi->dev, 2165 "error setting short address, MLME-SET.confirm status = %d", 2166 status 2167 ); 2168 return link_to_linux_err(status); 2169 } 2170 } 2171 if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) { 2172 status = mlme_set_request_sync( 2173 NS_IEEE_ADDRESS, 2174 0, 2175 8, 2176 &filt->ieee_addr, 2177 priv->spi 2178 ); 2179 if (status) { 2180 dev_err( 2181 &priv->spi->dev, 2182 "error setting ieee address, MLME-SET.confirm status = %d", 2183 status 2184 ); 2185 return link_to_linux_err(status); 2186 } 2187 } 2188 /* TODO: Should use MLME_START to set coord bit? */ 2189 return 0; 2190 } 2191 2192 /** 2193 * ca8210_set_tx_power() - Sets the transmit power of the ca8210 2194 * @hw: ieee802154_hw of target ca8210 2195 * @mbm: Transmit power in mBm (dBm*100) 2196 * 2197 * Return: 0 or linux error code 2198 */ 2199 static int ca8210_set_tx_power(struct ieee802154_hw *hw, s32 mbm) 2200 { 2201 struct ca8210_priv *priv = hw->priv; 2202 2203 mbm /= 100; 2204 return link_to_linux_err( 2205 mlme_set_request_sync(PHY_TRANSMIT_POWER, 0, 1, &mbm, priv->spi) 2206 ); 2207 } 2208 2209 /** 2210 * ca8210_set_cca_mode() - Sets the clear channel assessment mode of the ca8210 2211 * @hw: ieee802154_hw of target ca8210 2212 * @cca: CCA mode to set 2213 * 2214 * Return: 0 or linux error code 2215 */ 2216 static int ca8210_set_cca_mode( 2217 struct ieee802154_hw *hw, 2218 const struct wpan_phy_cca *cca 2219 ) 2220 { 2221 u8 status; 2222 u8 cca_mode; 2223 struct ca8210_priv *priv = hw->priv; 2224 2225 cca_mode = cca->mode & 3; 2226 if (cca_mode == 3 && cca->opt == NL802154_CCA_OPT_ENERGY_CARRIER_OR) { 2227 /* cca_mode 0 == CS OR ED, 3 == CS AND ED */ 2228 cca_mode = 0; 2229 } 2230 status = mlme_set_request_sync( 2231 PHY_CCA_MODE, 2232 0, 2233 1, 2234 &cca_mode, 2235 priv->spi 2236 ); 2237 if (status) { 2238 dev_err( 2239 &priv->spi->dev, 2240 "error setting cca mode, MLME-SET.confirm status = %d", 2241 status 2242 ); 2243 } 2244 return link_to_linux_err(status); 2245 } 2246 2247 /** 2248 * ca8210_set_cca_ed_level() - Sets the CCA ED level of the ca8210 2249 * @hw: ieee802154_hw of target ca8210 2250 * @level: ED level to set (in mbm) 2251 * 2252 * Sets the minimum threshold of measured energy above which the ca8210 will 2253 * back off and retry a transmission. 2254 * 2255 * Return: 0 or linux error code 2256 */ 2257 static int ca8210_set_cca_ed_level(struct ieee802154_hw *hw, s32 level) 2258 { 2259 u8 status; 2260 u8 ed_threshold = (level / 100) * 2 + 256; 2261 struct ca8210_priv *priv = hw->priv; 2262 2263 status = hwme_set_request_sync( 2264 HWME_EDTHRESHOLD, 2265 1, 2266 &ed_threshold, 2267 priv->spi 2268 ); 2269 if (status) { 2270 dev_err( 2271 &priv->spi->dev, 2272 "error setting ed threshold, HWME-SET.confirm status = %d", 2273 status 2274 ); 2275 } 2276 return link_to_linux_err(status); 2277 } 2278 2279 /** 2280 * ca8210_set_csma_params() - Sets the CSMA parameters of the ca8210 2281 * @hw: ieee802154_hw of target ca8210 2282 * @min_be: Minimum backoff exponent when backing off a transmission 2283 * @max_be: Maximum backoff exponent when backing off a transmission 2284 * @retries: Number of times to retry after backing off 2285 * 2286 * Return: 0 or linux error code 2287 */ 2288 static int ca8210_set_csma_params( 2289 struct ieee802154_hw *hw, 2290 u8 min_be, 2291 u8 max_be, 2292 u8 retries 2293 ) 2294 { 2295 u8 status; 2296 struct ca8210_priv *priv = hw->priv; 2297 2298 status = mlme_set_request_sync(MAC_MIN_BE, 0, 1, &min_be, priv->spi); 2299 if (status) { 2300 dev_err( 2301 &priv->spi->dev, 2302 "error setting min be, MLME-SET.confirm status = %d", 2303 status 2304 ); 2305 return link_to_linux_err(status); 2306 } 2307 status = mlme_set_request_sync(MAC_MAX_BE, 0, 1, &max_be, priv->spi); 2308 if (status) { 2309 dev_err( 2310 &priv->spi->dev, 2311 "error setting max be, MLME-SET.confirm status = %d", 2312 status 2313 ); 2314 return link_to_linux_err(status); 2315 } 2316 status = mlme_set_request_sync( 2317 MAC_MAX_CSMA_BACKOFFS, 2318 0, 2319 1, 2320 &retries, 2321 priv->spi 2322 ); 2323 if (status) { 2324 dev_err( 2325 &priv->spi->dev, 2326 "error setting max csma backoffs, MLME-SET.confirm status = %d", 2327 status 2328 ); 2329 } 2330 return link_to_linux_err(status); 2331 } 2332 2333 /** 2334 * ca8210_set_frame_retries() - Sets the maximum frame retries of the ca8210 2335 * @hw: ieee802154_hw of target ca8210 2336 * @retries: Number of retries 2337 * 2338 * Sets the number of times to retry a transmission if no acknowledgment was 2339 * was received from the other end when one was requested. 2340 * 2341 * Return: 0 or linux error code 2342 */ 2343 static int ca8210_set_frame_retries(struct ieee802154_hw *hw, s8 retries) 2344 { 2345 u8 status; 2346 struct ca8210_priv *priv = hw->priv; 2347 2348 status = mlme_set_request_sync( 2349 MAC_MAX_FRAME_RETRIES, 2350 0, 2351 1, 2352 &retries, 2353 priv->spi 2354 ); 2355 if (status) { 2356 dev_err( 2357 &priv->spi->dev, 2358 "error setting frame retries, MLME-SET.confirm status = %d", 2359 status 2360 ); 2361 } 2362 return link_to_linux_err(status); 2363 } 2364 2365 static int ca8210_set_promiscuous_mode(struct ieee802154_hw *hw, const bool on) 2366 { 2367 u8 status; 2368 struct ca8210_priv *priv = hw->priv; 2369 2370 status = mlme_set_request_sync( 2371 MAC_PROMISCUOUS_MODE, 2372 0, 2373 1, 2374 (const void*)&on, 2375 priv->spi 2376 ); 2377 if (status) { 2378 dev_err( 2379 &priv->spi->dev, 2380 "error setting promiscuous mode, MLME-SET.confirm status = %d", 2381 status 2382 ); 2383 } else { 2384 priv->promiscuous = on; 2385 } 2386 return link_to_linux_err(status); 2387 } 2388 2389 static const struct ieee802154_ops ca8210_phy_ops = { 2390 .start = ca8210_start, 2391 .stop = ca8210_stop, 2392 .xmit_async = ca8210_xmit_async, 2393 .ed = ca8210_get_ed, 2394 .set_channel = ca8210_set_channel, 2395 .set_hw_addr_filt = ca8210_set_hw_addr_filt, 2396 .set_txpower = ca8210_set_tx_power, 2397 .set_cca_mode = ca8210_set_cca_mode, 2398 .set_cca_ed_level = ca8210_set_cca_ed_level, 2399 .set_csma_params = ca8210_set_csma_params, 2400 .set_frame_retries = ca8210_set_frame_retries, 2401 .set_promiscuous_mode = ca8210_set_promiscuous_mode 2402 }; 2403 2404 /* Test/EVBME Interface */ 2405 2406 /** 2407 * ca8210_test_int_open() - Opens the test interface to the userspace 2408 * @inodp: inode representation of file interface 2409 * @filp: file interface 2410 * 2411 * Return: 0 or linux error code 2412 */ 2413 static int ca8210_test_int_open(struct inode *inodp, struct file *filp) 2414 { 2415 struct ca8210_priv *priv = inodp->i_private; 2416 2417 filp->private_data = priv; 2418 return 0; 2419 } 2420 2421 /** 2422 * ca8210_test_check_upstream() - Checks a command received from the upstream 2423 * testing interface for required action 2424 * @buf: Buffer containing command to check 2425 * @device_ref: Nondescript pointer to target device 2426 * 2427 * Return: 0 or linux error code 2428 */ 2429 static int ca8210_test_check_upstream(u8 *buf, void *device_ref) 2430 { 2431 int ret; 2432 u8 response[CA8210_SPI_BUF_SIZE]; 2433 2434 if (buf[0] == SPI_MLME_SET_REQUEST) { 2435 ret = tdme_checkpibattribute(buf[2], buf[4], buf + 5); 2436 if (ret) { 2437 response[0] = SPI_MLME_SET_CONFIRM; 2438 response[1] = 3; 2439 response[2] = MAC_INVALID_PARAMETER; 2440 response[3] = buf[2]; 2441 response[4] = buf[3]; 2442 if (cascoda_api_upstream) 2443 cascoda_api_upstream(response, 5, device_ref); 2444 return ret; 2445 } 2446 } 2447 if (buf[0] == SPI_MLME_ASSOCIATE_REQUEST) { 2448 return tdme_channelinit(buf[2], device_ref); 2449 } else if (buf[0] == SPI_MLME_START_REQUEST) { 2450 return tdme_channelinit(buf[4], device_ref); 2451 } else if ( 2452 (buf[0] == SPI_MLME_SET_REQUEST) && 2453 (buf[2] == PHY_CURRENT_CHANNEL) 2454 ) { 2455 return tdme_channelinit(buf[5], device_ref); 2456 } else if ( 2457 (buf[0] == SPI_TDME_SET_REQUEST) && 2458 (buf[2] == TDME_CHANNEL) 2459 ) { 2460 return tdme_channelinit(buf[4], device_ref); 2461 } else if ( 2462 (CA8210_MAC_WORKAROUNDS) && 2463 (buf[0] == SPI_MLME_RESET_REQUEST) && 2464 (buf[2] == 1) 2465 ) { 2466 /* reset COORD Bit for Channel Filtering as Coordinator */ 2467 return tdme_setsfr_request_sync( 2468 0, 2469 CA8210_SFR_MACCON, 2470 0, 2471 device_ref 2472 ); 2473 } 2474 return 0; 2475 } /* End of EVBMECheckSerialCommand() */ 2476 2477 /** 2478 * ca8210_test_int_user_write() - Called by a process in userspace to send a 2479 * message to the ca8210 drivers 2480 * @filp: file interface 2481 * @in_buf: Buffer containing message to write 2482 * @len: length of message 2483 * @off: file offset 2484 * 2485 * Return: 0 or linux error code 2486 */ 2487 static ssize_t ca8210_test_int_user_write( 2488 struct file *filp, 2489 const char __user *in_buf, 2490 size_t len, 2491 loff_t *off 2492 ) 2493 { 2494 int ret; 2495 struct ca8210_priv *priv = filp->private_data; 2496 u8 command[CA8210_SPI_BUF_SIZE]; 2497 2498 if (len > CA8210_SPI_BUF_SIZE) { 2499 dev_warn( 2500 &priv->spi->dev, 2501 "userspace requested erroneously long write (%zu)\n", 2502 len 2503 ); 2504 return -EMSGSIZE; 2505 } 2506 2507 ret = copy_from_user(command, in_buf, len); 2508 if (ret) { 2509 dev_err( 2510 &priv->spi->dev, 2511 "%d bytes could not be copied from userspace\n", 2512 ret 2513 ); 2514 return -EIO; 2515 } 2516 2517 ret = ca8210_test_check_upstream(command, priv->spi); 2518 if (ret == 0) { 2519 ret = ca8210_spi_exchange( 2520 command, 2521 command[1] + 2, 2522 NULL, 2523 priv->spi 2524 ); 2525 if (ret < 0) { 2526 /* effectively 0 bytes were written successfully */ 2527 dev_err( 2528 &priv->spi->dev, 2529 "spi exchange failed\n" 2530 ); 2531 return ret; 2532 } 2533 if (command[0] & SPI_SYN) 2534 priv->sync_down++; 2535 } 2536 2537 return len; 2538 } 2539 2540 /** 2541 * ca8210_test_int_user_read() - Called by a process in userspace to read a 2542 * message from the ca8210 drivers 2543 * @filp: file interface 2544 * @buf: Buffer to write message to 2545 * @len: length of message to read (ignored) 2546 * @offp: file offset 2547 * 2548 * If the O_NONBLOCK flag was set when opening the file then this function will 2549 * not block, i.e. it will return if the fifo is empty. Otherwise the function 2550 * will block, i.e. wait until new data arrives. 2551 * 2552 * Return: number of bytes read 2553 */ 2554 static ssize_t ca8210_test_int_user_read( 2555 struct file *filp, 2556 char __user *buf, 2557 size_t len, 2558 loff_t *offp 2559 ) 2560 { 2561 int i, cmdlen; 2562 struct ca8210_priv *priv = filp->private_data; 2563 unsigned char *fifo_buffer; 2564 unsigned long bytes_not_copied; 2565 2566 if (filp->f_flags & O_NONBLOCK) { 2567 /* Non-blocking mode */ 2568 if (kfifo_is_empty(&priv->test.up_fifo)) 2569 return 0; 2570 } else { 2571 /* Blocking mode */ 2572 wait_event_interruptible( 2573 priv->test.readq, 2574 !kfifo_is_empty(&priv->test.up_fifo) 2575 ); 2576 } 2577 2578 if (kfifo_out(&priv->test.up_fifo, &fifo_buffer, 4) != 4) { 2579 dev_err( 2580 &priv->spi->dev, 2581 "test_interface: Wrong number of elements popped from upstream fifo\n" 2582 ); 2583 return 0; 2584 } 2585 cmdlen = fifo_buffer[1]; 2586 bytes_not_copied = cmdlen + 2; 2587 2588 bytes_not_copied = copy_to_user(buf, fifo_buffer, bytes_not_copied); 2589 if (bytes_not_copied > 0) { 2590 dev_err( 2591 &priv->spi->dev, 2592 "%lu bytes could not be copied to user space!\n", 2593 bytes_not_copied 2594 ); 2595 } 2596 2597 dev_dbg(&priv->spi->dev, "test_interface: Cmd len = %d\n", cmdlen); 2598 2599 dev_dbg(&priv->spi->dev, "test_interface: Read\n"); 2600 for (i = 0; i < cmdlen + 2; i++) 2601 dev_dbg(&priv->spi->dev, "%#03x\n", fifo_buffer[i]); 2602 2603 kfree(fifo_buffer); 2604 2605 return cmdlen + 2; 2606 } 2607 2608 /** 2609 * ca8210_test_int_ioctl() - Called by a process in userspace to enact an 2610 * arbitrary action 2611 * @filp: file interface 2612 * @ioctl_num: which action to enact 2613 * @ioctl_param: arbitrary parameter for the action 2614 * 2615 * Return: status 2616 */ 2617 static long ca8210_test_int_ioctl( 2618 struct file *filp, 2619 unsigned int ioctl_num, 2620 unsigned long ioctl_param 2621 ) 2622 { 2623 struct ca8210_priv *priv = filp->private_data; 2624 2625 switch (ioctl_num) { 2626 case CA8210_IOCTL_HARD_RESET: 2627 ca8210_reset_send(priv->spi, ioctl_param); 2628 break; 2629 default: 2630 break; 2631 } 2632 return 0; 2633 } 2634 2635 /** 2636 * ca8210_test_int_poll() - Called by a process in userspace to determine which 2637 * actions are currently possible for the file 2638 * @filp: file interface 2639 * @ptable: poll table 2640 * 2641 * Return: set of poll return flags 2642 */ 2643 static unsigned int ca8210_test_int_poll( 2644 struct file *filp, 2645 struct poll_table_struct *ptable 2646 ) 2647 { 2648 unsigned int return_flags = 0; 2649 struct ca8210_priv *priv = filp->private_data; 2650 2651 poll_wait(filp, &priv->test.readq, ptable); 2652 if (!kfifo_is_empty(&priv->test.up_fifo)) 2653 return_flags |= (POLLIN | POLLRDNORM); 2654 if (wait_event_interruptible( 2655 priv->test.readq, 2656 !kfifo_is_empty(&priv->test.up_fifo))) { 2657 return POLLERR; 2658 } 2659 return return_flags; 2660 } 2661 2662 static const struct file_operations test_int_fops = { 2663 .read = ca8210_test_int_user_read, 2664 .write = ca8210_test_int_user_write, 2665 .open = ca8210_test_int_open, 2666 .release = NULL, 2667 .unlocked_ioctl = ca8210_test_int_ioctl, 2668 .poll = ca8210_test_int_poll 2669 }; 2670 2671 /* Init/Deinit */ 2672 2673 /** 2674 * ca8210_get_platform_data() - Populate a ca8210_platform_data object 2675 * @spi_device: Pointer to ca8210 spi device object to get data for 2676 * @pdata: Pointer to ca8210_platform_data object to populate 2677 * 2678 * Return: 0 or linux error code 2679 */ 2680 static int ca8210_get_platform_data( 2681 struct spi_device *spi_device, 2682 struct ca8210_platform_data *pdata 2683 ) 2684 { 2685 int ret = 0; 2686 2687 if (!spi_device->dev.of_node) 2688 return -EINVAL; 2689 2690 pdata->extclockenable = of_property_read_bool( 2691 spi_device->dev.of_node, 2692 "extclock-enable" 2693 ); 2694 if (pdata->extclockenable) { 2695 ret = of_property_read_u32( 2696 spi_device->dev.of_node, 2697 "extclock-freq", 2698 &pdata->extclockfreq 2699 ); 2700 if (ret < 0) 2701 return ret; 2702 2703 ret = of_property_read_u32( 2704 spi_device->dev.of_node, 2705 "extclock-gpio", 2706 &pdata->extclockgpio 2707 ); 2708 } 2709 2710 return ret; 2711 } 2712 2713 /** 2714 * ca8210_config_extern_clk() - Configure the external clock provided by the 2715 * ca8210 2716 * @pdata: Pointer to ca8210_platform_data containing clock parameters 2717 * @spi: Pointer to target ca8210 spi device 2718 * @on: True to turn the clock on, false to turn off 2719 * 2720 * The external clock is configured with a frequency and output pin taken from 2721 * the platform data. 2722 * 2723 * Return: 0 or linux error code 2724 */ 2725 static int ca8210_config_extern_clk( 2726 struct ca8210_platform_data *pdata, 2727 struct spi_device *spi, 2728 bool on 2729 ) 2730 { 2731 u8 clkparam[2]; 2732 2733 if (on) { 2734 dev_info(&spi->dev, "Switching external clock on\n"); 2735 switch (pdata->extclockfreq) { 2736 case SIXTEEN_MHZ: 2737 clkparam[0] = 1; 2738 break; 2739 case EIGHT_MHZ: 2740 clkparam[0] = 2; 2741 break; 2742 case FOUR_MHZ: 2743 clkparam[0] = 3; 2744 break; 2745 case TWO_MHZ: 2746 clkparam[0] = 4; 2747 break; 2748 case ONE_MHZ: 2749 clkparam[0] = 5; 2750 break; 2751 default: 2752 dev_crit(&spi->dev, "Invalid extclock-freq\n"); 2753 return -EINVAL; 2754 } 2755 clkparam[1] = pdata->extclockgpio; 2756 } else { 2757 dev_info(&spi->dev, "Switching external clock off\n"); 2758 clkparam[0] = 0; /* off */ 2759 clkparam[1] = 0; 2760 } 2761 return link_to_linux_err( 2762 hwme_set_request_sync(HWME_SYSCLKOUT, 2, clkparam, spi) 2763 ); 2764 } 2765 2766 /** 2767 * ca8210_register_ext_clock() - Register ca8210's external clock with kernel 2768 * @spi: Pointer to target ca8210 spi device 2769 * 2770 * Return: 0 or linux error code 2771 */ 2772 static int ca8210_register_ext_clock(struct spi_device *spi) 2773 { 2774 struct device_node *np = spi->dev.of_node; 2775 struct ca8210_priv *priv = spi_get_drvdata(spi); 2776 struct ca8210_platform_data *pdata = spi->dev.platform_data; 2777 int ret = 0; 2778 2779 if (!np) 2780 return -EFAULT; 2781 2782 priv->clk = clk_register_fixed_rate( 2783 &spi->dev, 2784 np->name, 2785 NULL, 2786 0, 2787 pdata->extclockfreq 2788 ); 2789 2790 if (IS_ERR(priv->clk)) { 2791 dev_crit(&spi->dev, "Failed to register external clk\n"); 2792 return PTR_ERR(priv->clk); 2793 } 2794 ret = of_clk_add_provider(np, of_clk_src_simple_get, priv->clk); 2795 if (ret) { 2796 clk_unregister(priv->clk); 2797 dev_crit( 2798 &spi->dev, 2799 "Failed to register external clock as clock provider\n" 2800 ); 2801 } else { 2802 dev_info(&spi->dev, "External clock set as clock provider\n"); 2803 } 2804 2805 return ret; 2806 } 2807 2808 /** 2809 * ca8210_unregister_ext_clock() - Unregister ca8210's external clock with 2810 * kernel 2811 * @spi: Pointer to target ca8210 spi device 2812 */ 2813 static void ca8210_unregister_ext_clock(struct spi_device *spi) 2814 { 2815 struct ca8210_priv *priv = spi_get_drvdata(spi); 2816 2817 if (!priv->clk) 2818 return 2819 2820 of_clk_del_provider(spi->dev.of_node); 2821 clk_unregister(priv->clk); 2822 dev_info(&spi->dev, "External clock unregistered\n"); 2823 } 2824 2825 /** 2826 * ca8210_reset_init() - Initialise the reset input to the ca8210 2827 * @spi: Pointer to target ca8210 spi device 2828 * 2829 * Return: 0 or linux error code 2830 */ 2831 static int ca8210_reset_init(struct spi_device *spi) 2832 { 2833 int ret; 2834 struct ca8210_platform_data *pdata = spi->dev.platform_data; 2835 2836 pdata->gpio_reset = of_get_named_gpio( 2837 spi->dev.of_node, 2838 "reset-gpio", 2839 0 2840 ); 2841 2842 ret = gpio_direction_output(pdata->gpio_reset, 1); 2843 if (ret < 0) { 2844 dev_crit( 2845 &spi->dev, 2846 "Reset GPIO %d did not set to output mode\n", 2847 pdata->gpio_reset 2848 ); 2849 } 2850 2851 return ret; 2852 } 2853 2854 /** 2855 * ca8210_interrupt_init() - Initialise the irq output from the ca8210 2856 * @spi: Pointer to target ca8210 spi device 2857 * 2858 * Return: 0 or linux error code 2859 */ 2860 static int ca8210_interrupt_init(struct spi_device *spi) 2861 { 2862 int ret; 2863 struct ca8210_platform_data *pdata = spi->dev.platform_data; 2864 2865 pdata->gpio_irq = of_get_named_gpio( 2866 spi->dev.of_node, 2867 "irq-gpio", 2868 0 2869 ); 2870 2871 pdata->irq_id = gpio_to_irq(pdata->gpio_irq); 2872 if (pdata->irq_id < 0) { 2873 dev_crit( 2874 &spi->dev, 2875 "Could not get irq for gpio pin %d\n", 2876 pdata->gpio_irq 2877 ); 2878 gpio_free(pdata->gpio_irq); 2879 return pdata->irq_id; 2880 } 2881 2882 ret = request_irq( 2883 pdata->irq_id, 2884 ca8210_interrupt_handler, 2885 IRQF_TRIGGER_FALLING, 2886 "ca8210-irq", 2887 spi_get_drvdata(spi) 2888 ); 2889 if (ret) { 2890 dev_crit(&spi->dev, "request_irq %d failed\n", pdata->irq_id); 2891 gpio_unexport(pdata->gpio_irq); 2892 gpio_free(pdata->gpio_irq); 2893 } 2894 2895 return ret; 2896 } 2897 2898 /** 2899 * ca8210_dev_com_init() - Initialise the spi communication component 2900 * @priv: Pointer to private data structure 2901 * 2902 * Return: 0 or linux error code 2903 */ 2904 static int ca8210_dev_com_init(struct ca8210_priv *priv) 2905 { 2906 priv->mlme_workqueue = alloc_ordered_workqueue( 2907 "MLME work queue", 2908 WQ_UNBOUND 2909 ); 2910 if (!priv->mlme_workqueue) { 2911 dev_crit(&priv->spi->dev, "alloc of mlme_workqueue failed!\n"); 2912 return -ENOMEM; 2913 } 2914 2915 priv->irq_workqueue = alloc_ordered_workqueue( 2916 "ca8210 irq worker", 2917 WQ_UNBOUND 2918 ); 2919 if (!priv->irq_workqueue) { 2920 dev_crit(&priv->spi->dev, "alloc of irq_workqueue failed!\n"); 2921 return -ENOMEM; 2922 } 2923 2924 return 0; 2925 } 2926 2927 /** 2928 * ca8210_dev_com_clear() - Deinitialise the spi communication component 2929 * @priv: Pointer to private data structure 2930 */ 2931 static void ca8210_dev_com_clear(struct ca8210_priv *priv) 2932 { 2933 flush_workqueue(priv->mlme_workqueue); 2934 destroy_workqueue(priv->mlme_workqueue); 2935 flush_workqueue(priv->irq_workqueue); 2936 destroy_workqueue(priv->irq_workqueue); 2937 } 2938 2939 #define CA8210_MAX_TX_POWERS (9) 2940 static const s32 ca8210_tx_powers[CA8210_MAX_TX_POWERS] = { 2941 800, 700, 600, 500, 400, 300, 200, 100, 0 2942 }; 2943 2944 #define CA8210_MAX_ED_LEVELS (21) 2945 static const s32 ca8210_ed_levels[CA8210_MAX_ED_LEVELS] = { 2946 -10300, -10250, -10200, -10150, -10100, -10050, -10000, -9950, -9900, 2947 -9850, -9800, -9750, -9700, -9650, -9600, -9550, -9500, -9450, -9400, 2948 -9350, -9300 2949 }; 2950 2951 /** 2952 * ca8210_hw_setup() - Populate the ieee802154_hw phy attributes with the 2953 * ca8210's defaults 2954 * @ca8210_hw: Pointer to ieee802154_hw to populate 2955 */ 2956 static void ca8210_hw_setup(struct ieee802154_hw *ca8210_hw) 2957 { 2958 /* Support channels 11-26 */ 2959 ca8210_hw->phy->supported.channels[0] = CA8210_VALID_CHANNELS; 2960 ca8210_hw->phy->supported.tx_powers_size = CA8210_MAX_TX_POWERS; 2961 ca8210_hw->phy->supported.tx_powers = ca8210_tx_powers; 2962 ca8210_hw->phy->supported.cca_ed_levels_size = CA8210_MAX_ED_LEVELS; 2963 ca8210_hw->phy->supported.cca_ed_levels = ca8210_ed_levels; 2964 ca8210_hw->phy->current_channel = 18; 2965 ca8210_hw->phy->current_page = 0; 2966 ca8210_hw->phy->transmit_power = 800; 2967 ca8210_hw->phy->cca.mode = NL802154_CCA_ENERGY_CARRIER; 2968 ca8210_hw->phy->cca.opt = NL802154_CCA_OPT_ENERGY_CARRIER_AND; 2969 ca8210_hw->phy->cca_ed_level = -9800; 2970 ca8210_hw->phy->symbol_duration = 16; 2971 ca8210_hw->phy->lifs_period = 40; 2972 ca8210_hw->phy->sifs_period = 12; 2973 ca8210_hw->flags = 2974 IEEE802154_HW_AFILT | 2975 IEEE802154_HW_OMIT_CKSUM | 2976 IEEE802154_HW_FRAME_RETRIES | 2977 IEEE802154_HW_PROMISCUOUS | 2978 IEEE802154_HW_CSMA_PARAMS; 2979 ca8210_hw->phy->flags = 2980 WPAN_PHY_FLAG_TXPOWER | 2981 WPAN_PHY_FLAG_CCA_ED_LEVEL | 2982 WPAN_PHY_FLAG_CCA_MODE; 2983 } 2984 2985 /** 2986 * ca8210_test_interface_init() - Initialise the test file interface 2987 * @priv: Pointer to private data structure 2988 * 2989 * Provided as an alternative to the standard linux network interface, the test 2990 * interface exposes a file in the filesystem (ca8210_test) that allows 2991 * 802.15.4 SAP Commands and Cascoda EVBME commands to be sent directly to 2992 * the stack. 2993 * 2994 * Return: 0 or linux error code 2995 */ 2996 static int ca8210_test_interface_init(struct ca8210_priv *priv) 2997 { 2998 struct ca8210_test *test = &priv->test; 2999 char node_name[32]; 3000 3001 snprintf( 3002 node_name, 3003 sizeof(node_name), 3004 "ca8210@%d_%d", 3005 priv->spi->master->bus_num, 3006 priv->spi->chip_select 3007 ); 3008 3009 test->ca8210_dfs_spi_int = debugfs_create_file( 3010 node_name, 3011 0600, /* S_IRUSR | S_IWUSR */ 3012 NULL, 3013 priv, 3014 &test_int_fops 3015 ); 3016 if (IS_ERR(test->ca8210_dfs_spi_int)) { 3017 dev_err( 3018 &priv->spi->dev, 3019 "Error %ld when creating debugfs node\n", 3020 PTR_ERR(test->ca8210_dfs_spi_int) 3021 ); 3022 return PTR_ERR(test->ca8210_dfs_spi_int); 3023 } 3024 debugfs_create_symlink("ca8210", NULL, node_name); 3025 init_waitqueue_head(&test->readq); 3026 return kfifo_alloc( 3027 &test->up_fifo, 3028 CA8210_TEST_INT_FIFO_SIZE, 3029 GFP_KERNEL 3030 ); 3031 } 3032 3033 /** 3034 * ca8210_test_interface_clear() - Deinitialise the test file interface 3035 * @priv: Pointer to private data structure 3036 */ 3037 static void ca8210_test_interface_clear(struct ca8210_priv *priv) 3038 { 3039 struct ca8210_test *test = &priv->test; 3040 3041 if (!IS_ERR(test->ca8210_dfs_spi_int)) 3042 debugfs_remove(test->ca8210_dfs_spi_int); 3043 kfifo_free(&test->up_fifo); 3044 dev_info(&priv->spi->dev, "Test interface removed\n"); 3045 } 3046 3047 /** 3048 * ca8210_remove() - Shut down a ca8210 upon being disconnected 3049 * @priv: Pointer to private data structure 3050 * 3051 * Return: 0 or linux error code 3052 */ 3053 static int ca8210_remove(struct spi_device *spi_device) 3054 { 3055 struct ca8210_priv *priv; 3056 struct ca8210_platform_data *pdata; 3057 3058 dev_info(&spi_device->dev, "Removing ca8210\n"); 3059 3060 pdata = spi_device->dev.platform_data; 3061 if (pdata) { 3062 if (pdata->extclockenable) { 3063 ca8210_unregister_ext_clock(spi_device); 3064 ca8210_config_extern_clk(pdata, spi_device, 0); 3065 } 3066 free_irq(pdata->irq_id, spi_device->dev.driver_data); 3067 kfree(pdata); 3068 spi_device->dev.platform_data = NULL; 3069 } 3070 /* get spi_device private data */ 3071 priv = spi_get_drvdata(spi_device); 3072 if (priv) { 3073 dev_info( 3074 &spi_device->dev, 3075 "sync_down = %d, sync_up = %d\n", 3076 priv->sync_down, 3077 priv->sync_up 3078 ); 3079 ca8210_dev_com_clear(spi_device->dev.driver_data); 3080 if (priv->hw) { 3081 if (priv->hw_registered) 3082 ieee802154_unregister_hw(priv->hw); 3083 ieee802154_free_hw(priv->hw); 3084 priv->hw = NULL; 3085 dev_info( 3086 &spi_device->dev, 3087 "Unregistered & freed ieee802154_hw.\n" 3088 ); 3089 } 3090 if (IS_ENABLED(CONFIG_IEEE802154_CA8210_DEBUGFS)) 3091 ca8210_test_interface_clear(priv); 3092 } 3093 3094 return 0; 3095 } 3096 3097 /** 3098 * ca8210_probe() - Set up a connected ca8210 upon being detected by the system 3099 * @priv: Pointer to private data structure 3100 * 3101 * Return: 0 or linux error code 3102 */ 3103 static int ca8210_probe(struct spi_device *spi_device) 3104 { 3105 struct ca8210_priv *priv; 3106 struct ieee802154_hw *hw; 3107 struct ca8210_platform_data *pdata; 3108 int ret; 3109 3110 dev_info(&spi_device->dev, "Inserting ca8210\n"); 3111 3112 /* allocate ieee802154_hw and private data */ 3113 hw = ieee802154_alloc_hw(sizeof(struct ca8210_priv), &ca8210_phy_ops); 3114 if (!hw) { 3115 dev_crit(&spi_device->dev, "ieee802154_alloc_hw failed\n"); 3116 ret = -ENOMEM; 3117 goto error; 3118 } 3119 3120 priv = hw->priv; 3121 priv->hw = hw; 3122 priv->spi = spi_device; 3123 hw->parent = &spi_device->dev; 3124 spin_lock_init(&priv->lock); 3125 priv->async_tx_pending = false; 3126 priv->hw_registered = false; 3127 priv->sync_up = 0; 3128 priv->sync_down = 0; 3129 priv->promiscuous = false; 3130 priv->retries = 0; 3131 init_completion(&priv->ca8210_is_awake); 3132 init_completion(&priv->spi_transfer_complete); 3133 init_completion(&priv->sync_exchange_complete); 3134 spi_set_drvdata(priv->spi, priv); 3135 if (IS_ENABLED(CONFIG_IEEE802154_CA8210_DEBUGFS)) { 3136 cascoda_api_upstream = ca8210_test_int_driver_write; 3137 ca8210_test_interface_init(priv); 3138 } else { 3139 cascoda_api_upstream = NULL; 3140 } 3141 ca8210_hw_setup(hw); 3142 ieee802154_random_extended_addr(&hw->phy->perm_extended_addr); 3143 3144 pdata = kmalloc(sizeof(*pdata), GFP_KERNEL); 3145 if (!pdata) { 3146 ret = -ENOMEM; 3147 goto error; 3148 } 3149 3150 ret = ca8210_get_platform_data(priv->spi, pdata); 3151 if (ret) { 3152 dev_crit(&spi_device->dev, "ca8210_get_platform_data failed\n"); 3153 goto error; 3154 } 3155 priv->spi->dev.platform_data = pdata; 3156 3157 ret = ca8210_dev_com_init(priv); 3158 if (ret) { 3159 dev_crit(&spi_device->dev, "ca8210_dev_com_init failed\n"); 3160 goto error; 3161 } 3162 ret = ca8210_reset_init(priv->spi); 3163 if (ret) { 3164 dev_crit(&spi_device->dev, "ca8210_reset_init failed\n"); 3165 goto error; 3166 } 3167 3168 ret = ca8210_interrupt_init(priv->spi); 3169 if (ret) { 3170 dev_crit(&spi_device->dev, "ca8210_interrupt_init failed\n"); 3171 goto error; 3172 } 3173 3174 msleep(100); 3175 3176 ca8210_reset_send(priv->spi, 1); 3177 3178 ret = tdme_chipinit(priv->spi); 3179 if (ret) { 3180 dev_crit(&spi_device->dev, "tdme_chipinit failed\n"); 3181 goto error; 3182 } 3183 3184 if (pdata->extclockenable) { 3185 ret = ca8210_config_extern_clk(pdata, priv->spi, 1); 3186 if (ret) { 3187 dev_crit( 3188 &spi_device->dev, 3189 "ca8210_config_extern_clk failed\n" 3190 ); 3191 goto error; 3192 } 3193 ret = ca8210_register_ext_clock(priv->spi); 3194 if (ret) { 3195 dev_crit( 3196 &spi_device->dev, 3197 "ca8210_register_ext_clock failed\n" 3198 ); 3199 goto error; 3200 } 3201 } 3202 3203 ret = ieee802154_register_hw(hw); 3204 if (ret) { 3205 dev_crit(&spi_device->dev, "ieee802154_register_hw failed\n"); 3206 goto error; 3207 } 3208 priv->hw_registered = true; 3209 3210 return 0; 3211 error: 3212 msleep(100); /* wait for pending spi transfers to complete */ 3213 ca8210_remove(spi_device); 3214 return link_to_linux_err(ret); 3215 } 3216 3217 static const struct of_device_id ca8210_of_ids[] = { 3218 {.compatible = "cascoda,ca8210", }, 3219 {}, 3220 }; 3221 MODULE_DEVICE_TABLE(of, ca8210_of_ids); 3222 3223 static struct spi_driver ca8210_spi_driver = { 3224 .driver = { 3225 .name = DRIVER_NAME, 3226 .owner = THIS_MODULE, 3227 .of_match_table = of_match_ptr(ca8210_of_ids), 3228 }, 3229 .probe = ca8210_probe, 3230 .remove = ca8210_remove 3231 }; 3232 3233 module_spi_driver(ca8210_spi_driver); 3234 3235 MODULE_AUTHOR("Harry Morris <h.morris@cascoda.com>"); 3236 MODULE_DESCRIPTION("CA-8210 SoftMAC driver"); 3237 MODULE_LICENSE("Dual BSD/GPL"); 3238 MODULE_VERSION("1.0"); 3239