1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * atusb.c - Driver for the ATUSB IEEE 802.15.4 dongle 4 * 5 * Written 2013 by Werner Almesberger <werner@almesberger.net> 6 * 7 * Copyright (c) 2015 - 2016 Stefan Schmidt <stefan@datenfreihafen.org> 8 * 9 * Based on at86rf230.c and spi_atusb.c. 10 * at86rf230.c is 11 * Copyright (C) 2009 Siemens AG 12 * Written by: Dmitry Eremin-Solenikov <dmitry.baryshkov@siemens.com> 13 * 14 * spi_atusb.c is 15 * Copyright (c) 2011 Richard Sharpe <realrichardsharpe@gmail.com> 16 * Copyright (c) 2011 Stefan Schmidt <stefan@datenfreihafen.org> 17 * Copyright (c) 2011 Werner Almesberger <werner@almesberger.net> 18 * 19 * USB initialization is 20 * Copyright (c) 2013 Alexander Aring <alex.aring@gmail.com> 21 * 22 * Busware HUL support is 23 * Copyright (c) 2017 Josef Filzmaier <j.filzmaier@gmx.at> 24 */ 25 26 #include <linux/kernel.h> 27 #include <linux/slab.h> 28 #include <linux/module.h> 29 #include <linux/jiffies.h> 30 #include <linux/usb.h> 31 #include <linux/skbuff.h> 32 33 #include <net/cfg802154.h> 34 #include <net/mac802154.h> 35 36 #include "at86rf230.h" 37 #include "atusb.h" 38 39 #define ATUSB_JEDEC_ATMEL 0x1f /* JEDEC manufacturer ID */ 40 41 #define ATUSB_NUM_RX_URBS 4 /* allow for a bit of local latency */ 42 #define ATUSB_ALLOC_DELAY_MS 100 /* delay after failed allocation */ 43 #define ATUSB_TX_TIMEOUT_MS 200 /* on the air timeout */ 44 45 struct atusb { 46 struct ieee802154_hw *hw; 47 struct usb_device *usb_dev; 48 struct atusb_chip_data *data; 49 int shutdown; /* non-zero if shutting down */ 50 int err; /* set by first error */ 51 52 /* RX variables */ 53 struct delayed_work work; /* memory allocations */ 54 struct usb_anchor idle_urbs; /* URBs waiting to be submitted */ 55 struct usb_anchor rx_urbs; /* URBs waiting for reception */ 56 57 /* TX variables */ 58 struct usb_ctrlrequest tx_dr; 59 struct urb *tx_urb; 60 struct sk_buff *tx_skb; 61 u8 tx_ack_seq; /* current TX ACK sequence number */ 62 63 /* Firmware variable */ 64 unsigned char fw_ver_maj; /* Firmware major version number */ 65 unsigned char fw_ver_min; /* Firmware minor version number */ 66 unsigned char fw_hw_type; /* Firmware hardware type */ 67 }; 68 69 struct atusb_chip_data { 70 u16 t_channel_switch; 71 int rssi_base_val; 72 73 int (*set_channel)(struct ieee802154_hw*, u8, u8); 74 int (*set_txpower)(struct ieee802154_hw*, s32); 75 }; 76 77 static int atusb_write_subreg(struct atusb *atusb, u8 reg, u8 mask, 78 u8 shift, u8 value) 79 { 80 struct usb_device *usb_dev = atusb->usb_dev; 81 u8 orig, tmp; 82 int ret = 0; 83 84 dev_dbg(&usb_dev->dev, "%s: 0x%02x <- 0x%02x\n", __func__, reg, value); 85 86 ret = usb_control_msg_recv(usb_dev, 0, ATUSB_REG_READ, ATUSB_REQ_FROM_DEV, 87 0, reg, &orig, 1, 1000, GFP_KERNEL); 88 if (ret < 0) 89 return ret; 90 91 /* Write the value only into that part of the register which is allowed 92 * by the mask. All other bits stay as before. 93 */ 94 tmp = orig & ~mask; 95 tmp |= (value << shift) & mask; 96 97 if (tmp != orig) 98 ret = usb_control_msg_send(usb_dev, 0, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV, 99 tmp, reg, NULL, 0, 1000, GFP_KERNEL); 100 101 return ret; 102 } 103 104 static int atusb_read_subreg(struct atusb *lp, 105 unsigned int addr, unsigned int mask, 106 unsigned int shift) 107 { 108 int reg, ret; 109 110 ret = usb_control_msg_recv(lp->usb_dev, 0, ATUSB_REG_READ, ATUSB_REQ_FROM_DEV, 111 0, addr, ®, 1, 1000, GFP_KERNEL); 112 if (ret < 0) 113 return ret; 114 115 reg = (reg & mask) >> shift; 116 117 return reg; 118 } 119 120 static int atusb_get_and_clear_error(struct atusb *atusb) 121 { 122 int err = atusb->err; 123 124 atusb->err = 0; 125 return err; 126 } 127 128 /* ----- skb allocation ---------------------------------------------------- */ 129 130 #define MAX_PSDU 127 131 #define MAX_RX_XFER (1 + MAX_PSDU + 2 + 1) /* PHR+PSDU+CRC+LQI */ 132 133 #define SKB_ATUSB(skb) (*(struct atusb **)(skb)->cb) 134 135 static void atusb_in(struct urb *urb); 136 137 static int atusb_submit_rx_urb(struct atusb *atusb, struct urb *urb) 138 { 139 struct usb_device *usb_dev = atusb->usb_dev; 140 struct sk_buff *skb = urb->context; 141 int ret; 142 143 if (!skb) { 144 skb = alloc_skb(MAX_RX_XFER, GFP_KERNEL); 145 if (!skb) { 146 dev_warn_ratelimited(&usb_dev->dev, 147 "atusb_in: can't allocate skb\n"); 148 return -ENOMEM; 149 } 150 skb_put(skb, MAX_RX_XFER); 151 SKB_ATUSB(skb) = atusb; 152 } 153 154 usb_fill_bulk_urb(urb, usb_dev, usb_rcvbulkpipe(usb_dev, 1), 155 skb->data, MAX_RX_XFER, atusb_in, skb); 156 usb_anchor_urb(urb, &atusb->rx_urbs); 157 158 ret = usb_submit_urb(urb, GFP_KERNEL); 159 if (ret) { 160 usb_unanchor_urb(urb); 161 kfree_skb(skb); 162 urb->context = NULL; 163 } 164 return ret; 165 } 166 167 static void atusb_work_urbs(struct work_struct *work) 168 { 169 struct atusb *atusb = 170 container_of(to_delayed_work(work), struct atusb, work); 171 struct usb_device *usb_dev = atusb->usb_dev; 172 struct urb *urb; 173 int ret; 174 175 if (atusb->shutdown) 176 return; 177 178 do { 179 urb = usb_get_from_anchor(&atusb->idle_urbs); 180 if (!urb) 181 return; 182 ret = atusb_submit_rx_urb(atusb, urb); 183 } while (!ret); 184 185 usb_anchor_urb(urb, &atusb->idle_urbs); 186 dev_warn_ratelimited(&usb_dev->dev, 187 "atusb_in: can't allocate/submit URB (%d)\n", ret); 188 schedule_delayed_work(&atusb->work, 189 msecs_to_jiffies(ATUSB_ALLOC_DELAY_MS) + 1); 190 } 191 192 /* ----- Asynchronous USB -------------------------------------------------- */ 193 194 static void atusb_tx_done(struct atusb *atusb, u8 seq, int reason) 195 { 196 struct usb_device *usb_dev = atusb->usb_dev; 197 u8 expect = atusb->tx_ack_seq; 198 199 dev_dbg(&usb_dev->dev, "%s (0x%02x/0x%02x)\n", __func__, seq, expect); 200 if (seq == expect) { 201 /* TODO check for ifs handling in firmware */ 202 if (reason == IEEE802154_SUCCESS) 203 ieee802154_xmit_complete(atusb->hw, atusb->tx_skb, false); 204 else 205 ieee802154_xmit_error(atusb->hw, atusb->tx_skb, reason); 206 } else { 207 /* TODO I experience this case when atusb has a tx complete 208 * irq before probing, we should fix the firmware it's an 209 * unlikely case now that seq == expect is then true, but can 210 * happen and fail with a tx_skb = NULL; 211 */ 212 ieee802154_xmit_hw_error(atusb->hw, atusb->tx_skb); 213 } 214 } 215 216 static void atusb_in_good(struct urb *urb) 217 { 218 struct usb_device *usb_dev = urb->dev; 219 struct sk_buff *skb = urb->context; 220 struct atusb *atusb = SKB_ATUSB(skb); 221 int result = IEEE802154_SUCCESS; 222 u8 len, lqi, trac; 223 224 if (!urb->actual_length) { 225 dev_dbg(&usb_dev->dev, "atusb_in: zero-sized URB ?\n"); 226 return; 227 } 228 229 len = *skb->data; 230 231 switch (urb->actual_length) { 232 case 2: 233 trac = TRAC_MASK(*(skb->data + 1)); 234 switch (trac) { 235 case TRAC_SUCCESS: 236 case TRAC_SUCCESS_DATA_PENDING: 237 /* already IEEE802154_SUCCESS */ 238 break; 239 case TRAC_CHANNEL_ACCESS_FAILURE: 240 result = IEEE802154_CHANNEL_ACCESS_FAILURE; 241 break; 242 case TRAC_NO_ACK: 243 result = IEEE802154_NO_ACK; 244 break; 245 default: 246 result = IEEE802154_SYSTEM_ERROR; 247 } 248 249 fallthrough; 250 case 1: 251 atusb_tx_done(atusb, len, result); 252 return; 253 } 254 255 if (len + 1 > urb->actual_length - 1) { 256 dev_dbg(&usb_dev->dev, "atusb_in: frame len %d+1 > URB %u-1\n", 257 len, urb->actual_length); 258 return; 259 } 260 261 if (!ieee802154_is_valid_psdu_len(len)) { 262 dev_dbg(&usb_dev->dev, "atusb_in: frame corrupted\n"); 263 return; 264 } 265 266 lqi = skb->data[len + 1]; 267 dev_dbg(&usb_dev->dev, "atusb_in: rx len %d lqi 0x%02x\n", len, lqi); 268 skb_pull(skb, 1); /* remove PHR */ 269 skb_trim(skb, len); /* get payload only */ 270 ieee802154_rx_irqsafe(atusb->hw, skb, lqi); 271 urb->context = NULL; /* skb is gone */ 272 } 273 274 static void atusb_in(struct urb *urb) 275 { 276 struct usb_device *usb_dev = urb->dev; 277 struct sk_buff *skb = urb->context; 278 struct atusb *atusb = SKB_ATUSB(skb); 279 280 dev_dbg(&usb_dev->dev, "%s: status %d len %d\n", __func__, 281 urb->status, urb->actual_length); 282 if (urb->status) { 283 if (urb->status == -ENOENT) { /* being killed */ 284 kfree_skb(skb); 285 urb->context = NULL; 286 return; 287 } 288 dev_dbg(&usb_dev->dev, "%s: URB error %d\n", __func__, urb->status); 289 } else { 290 atusb_in_good(urb); 291 } 292 293 usb_anchor_urb(urb, &atusb->idle_urbs); 294 if (!atusb->shutdown) 295 schedule_delayed_work(&atusb->work, 0); 296 } 297 298 /* ----- URB allocation/deallocation --------------------------------------- */ 299 300 static void atusb_free_urbs(struct atusb *atusb) 301 { 302 struct urb *urb; 303 304 while (1) { 305 urb = usb_get_from_anchor(&atusb->idle_urbs); 306 if (!urb) 307 break; 308 kfree_skb(urb->context); 309 usb_free_urb(urb); 310 } 311 } 312 313 static int atusb_alloc_urbs(struct atusb *atusb, int n) 314 { 315 struct urb *urb; 316 317 while (n) { 318 urb = usb_alloc_urb(0, GFP_KERNEL); 319 if (!urb) { 320 atusb_free_urbs(atusb); 321 return -ENOMEM; 322 } 323 usb_anchor_urb(urb, &atusb->idle_urbs); 324 usb_free_urb(urb); 325 n--; 326 } 327 return 0; 328 } 329 330 /* ----- IEEE 802.15.4 interface operations -------------------------------- */ 331 332 static void atusb_xmit_complete(struct urb *urb) 333 { 334 dev_dbg(&urb->dev->dev, "atusb_xmit urb completed"); 335 } 336 337 static int atusb_xmit(struct ieee802154_hw *hw, struct sk_buff *skb) 338 { 339 struct atusb *atusb = hw->priv; 340 struct usb_device *usb_dev = atusb->usb_dev; 341 int ret; 342 343 dev_dbg(&usb_dev->dev, "%s (%d)\n", __func__, skb->len); 344 atusb->tx_skb = skb; 345 atusb->tx_ack_seq++; 346 atusb->tx_dr.wIndex = cpu_to_le16(atusb->tx_ack_seq); 347 atusb->tx_dr.wLength = cpu_to_le16(skb->len); 348 349 usb_fill_control_urb(atusb->tx_urb, usb_dev, 350 usb_sndctrlpipe(usb_dev, 0), 351 (unsigned char *)&atusb->tx_dr, skb->data, 352 skb->len, atusb_xmit_complete, NULL); 353 ret = usb_submit_urb(atusb->tx_urb, GFP_ATOMIC); 354 dev_dbg(&usb_dev->dev, "%s done (%d)\n", __func__, ret); 355 return ret; 356 } 357 358 static int atusb_ed(struct ieee802154_hw *hw, u8 *level) 359 { 360 WARN_ON(!level); 361 *level = 0xbe; 362 return 0; 363 } 364 365 static int atusb_set_hw_addr_filt(struct ieee802154_hw *hw, 366 struct ieee802154_hw_addr_filt *filt, 367 unsigned long changed) 368 { 369 struct atusb *atusb = hw->priv; 370 struct device *dev = &atusb->usb_dev->dev; 371 372 if (changed & IEEE802154_AFILT_SADDR_CHANGED) { 373 u16 addr = le16_to_cpu(filt->short_addr); 374 375 dev_vdbg(dev, "%s called for saddr\n", __func__); 376 usb_control_msg_send(atusb->usb_dev, 0, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV, 377 addr, RG_SHORT_ADDR_0, NULL, 0, 1000, GFP_KERNEL); 378 379 usb_control_msg_send(atusb->usb_dev, 0, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV, 380 addr >> 8, RG_SHORT_ADDR_1, NULL, 0, 1000, GFP_KERNEL); 381 } 382 383 if (changed & IEEE802154_AFILT_PANID_CHANGED) { 384 u16 pan = le16_to_cpu(filt->pan_id); 385 386 dev_vdbg(dev, "%s called for pan id\n", __func__); 387 usb_control_msg_send(atusb->usb_dev, 0, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV, 388 pan, RG_PAN_ID_0, NULL, 0, 1000, GFP_KERNEL); 389 390 usb_control_msg_send(atusb->usb_dev, 0, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV, 391 pan >> 8, RG_PAN_ID_1, NULL, 0, 1000, GFP_KERNEL); 392 } 393 394 if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) { 395 u8 i, addr[IEEE802154_EXTENDED_ADDR_LEN]; 396 397 memcpy(addr, &filt->ieee_addr, IEEE802154_EXTENDED_ADDR_LEN); 398 dev_vdbg(dev, "%s called for IEEE addr\n", __func__); 399 for (i = 0; i < 8; i++) 400 usb_control_msg_send(atusb->usb_dev, 0, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV, 401 addr[i], RG_IEEE_ADDR_0 + i, NULL, 0, 402 1000, GFP_KERNEL); 403 } 404 405 if (changed & IEEE802154_AFILT_PANC_CHANGED) { 406 dev_vdbg(dev, "%s called for panc change\n", __func__); 407 if (filt->pan_coord) 408 atusb_write_subreg(atusb, SR_AACK_I_AM_COORD, 1); 409 else 410 atusb_write_subreg(atusb, SR_AACK_I_AM_COORD, 0); 411 } 412 413 return atusb_get_and_clear_error(atusb); 414 } 415 416 static int atusb_start(struct ieee802154_hw *hw) 417 { 418 struct atusb *atusb = hw->priv; 419 struct usb_device *usb_dev = atusb->usb_dev; 420 int ret; 421 422 dev_dbg(&usb_dev->dev, "%s\n", __func__); 423 schedule_delayed_work(&atusb->work, 0); 424 usb_control_msg_send(atusb->usb_dev, 0, ATUSB_RX_MODE, ATUSB_REQ_TO_DEV, 1, 0, 425 NULL, 0, 1000, GFP_KERNEL); 426 ret = atusb_get_and_clear_error(atusb); 427 if (ret < 0) 428 usb_kill_anchored_urbs(&atusb->idle_urbs); 429 return ret; 430 } 431 432 static void atusb_stop(struct ieee802154_hw *hw) 433 { 434 struct atusb *atusb = hw->priv; 435 struct usb_device *usb_dev = atusb->usb_dev; 436 437 dev_dbg(&usb_dev->dev, "%s\n", __func__); 438 usb_kill_anchored_urbs(&atusb->idle_urbs); 439 usb_control_msg_send(atusb->usb_dev, 0, ATUSB_RX_MODE, ATUSB_REQ_TO_DEV, 0, 0, 440 NULL, 0, 1000, GFP_KERNEL); 441 atusb_get_and_clear_error(atusb); 442 } 443 444 #define ATUSB_MAX_TX_POWERS 0xF 445 static const s32 atusb_powers[ATUSB_MAX_TX_POWERS + 1] = { 446 300, 280, 230, 180, 130, 70, 0, -100, -200, -300, -400, -500, -700, 447 -900, -1200, -1700, 448 }; 449 450 static int 451 atusb_txpower(struct ieee802154_hw *hw, s32 mbm) 452 { 453 struct atusb *atusb = hw->priv; 454 455 if (atusb->data) 456 return atusb->data->set_txpower(hw, mbm); 457 else 458 return -ENOTSUPP; 459 } 460 461 static int 462 atusb_set_txpower(struct ieee802154_hw *hw, s32 mbm) 463 { 464 struct atusb *atusb = hw->priv; 465 u32 i; 466 467 for (i = 0; i < hw->phy->supported.tx_powers_size; i++) { 468 if (hw->phy->supported.tx_powers[i] == mbm) 469 return atusb_write_subreg(atusb, SR_TX_PWR_23X, i); 470 } 471 472 return -EINVAL; 473 } 474 475 static int 476 hulusb_set_txpower(struct ieee802154_hw *hw, s32 mbm) 477 { 478 u32 i; 479 480 for (i = 0; i < hw->phy->supported.tx_powers_size; i++) { 481 if (hw->phy->supported.tx_powers[i] == mbm) 482 return atusb_write_subreg(hw->priv, SR_TX_PWR_212, i); 483 } 484 485 return -EINVAL; 486 } 487 488 #define ATUSB_MAX_ED_LEVELS 0xF 489 static const s32 atusb_ed_levels[ATUSB_MAX_ED_LEVELS + 1] = { 490 -9100, -8900, -8700, -8500, -8300, -8100, -7900, -7700, -7500, -7300, 491 -7100, -6900, -6700, -6500, -6300, -6100, 492 }; 493 494 #define AT86RF212_MAX_TX_POWERS 0x1F 495 static const s32 at86rf212_powers[AT86RF212_MAX_TX_POWERS + 1] = { 496 500, 400, 300, 200, 100, 0, -100, -200, -300, -400, -500, -600, -700, 497 -800, -900, -1000, -1100, -1200, -1300, -1400, -1500, -1600, -1700, 498 -1800, -1900, -2000, -2100, -2200, -2300, -2400, -2500, -2600, 499 }; 500 501 #define AT86RF2XX_MAX_ED_LEVELS 0xF 502 static const s32 at86rf212_ed_levels_100[AT86RF2XX_MAX_ED_LEVELS + 1] = { 503 -10000, -9800, -9600, -9400, -9200, -9000, -8800, -8600, -8400, -8200, 504 -8000, -7800, -7600, -7400, -7200, -7000, 505 }; 506 507 static const s32 at86rf212_ed_levels_98[AT86RF2XX_MAX_ED_LEVELS + 1] = { 508 -9800, -9600, -9400, -9200, -9000, -8800, -8600, -8400, -8200, -8000, 509 -7800, -7600, -7400, -7200, -7000, -6800, 510 }; 511 512 static int 513 atusb_set_cca_mode(struct ieee802154_hw *hw, const struct wpan_phy_cca *cca) 514 { 515 struct atusb *atusb = hw->priv; 516 u8 val; 517 518 /* mapping 802.15.4 to driver spec */ 519 switch (cca->mode) { 520 case NL802154_CCA_ENERGY: 521 val = 1; 522 break; 523 case NL802154_CCA_CARRIER: 524 val = 2; 525 break; 526 case NL802154_CCA_ENERGY_CARRIER: 527 switch (cca->opt) { 528 case NL802154_CCA_OPT_ENERGY_CARRIER_AND: 529 val = 3; 530 break; 531 case NL802154_CCA_OPT_ENERGY_CARRIER_OR: 532 val = 0; 533 break; 534 default: 535 return -EINVAL; 536 } 537 break; 538 default: 539 return -EINVAL; 540 } 541 542 return atusb_write_subreg(atusb, SR_CCA_MODE, val); 543 } 544 545 static int hulusb_set_cca_ed_level(struct atusb *lp, int rssi_base_val) 546 { 547 int cca_ed_thres; 548 549 cca_ed_thres = atusb_read_subreg(lp, SR_CCA_ED_THRES); 550 if (cca_ed_thres < 0) 551 return cca_ed_thres; 552 553 switch (rssi_base_val) { 554 case -98: 555 lp->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_98; 556 lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_98); 557 lp->hw->phy->cca_ed_level = at86rf212_ed_levels_98[cca_ed_thres]; 558 break; 559 case -100: 560 lp->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_100; 561 lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_100); 562 lp->hw->phy->cca_ed_level = at86rf212_ed_levels_100[cca_ed_thres]; 563 break; 564 default: 565 WARN_ON(1); 566 } 567 568 return 0; 569 } 570 571 static int 572 atusb_set_cca_ed_level(struct ieee802154_hw *hw, s32 mbm) 573 { 574 struct atusb *atusb = hw->priv; 575 u32 i; 576 577 for (i = 0; i < hw->phy->supported.cca_ed_levels_size; i++) { 578 if (hw->phy->supported.cca_ed_levels[i] == mbm) 579 return atusb_write_subreg(atusb, SR_CCA_ED_THRES, i); 580 } 581 582 return -EINVAL; 583 } 584 585 static int atusb_channel(struct ieee802154_hw *hw, u8 page, u8 channel) 586 { 587 struct atusb *atusb = hw->priv; 588 int ret = -ENOTSUPP; 589 590 if (atusb->data) { 591 ret = atusb->data->set_channel(hw, page, channel); 592 /* @@@ ugly synchronization */ 593 msleep(atusb->data->t_channel_switch); 594 } 595 596 return ret; 597 } 598 599 static int atusb_set_channel(struct ieee802154_hw *hw, u8 page, u8 channel) 600 { 601 struct atusb *atusb = hw->priv; 602 int ret; 603 604 ret = atusb_write_subreg(atusb, SR_CHANNEL, channel); 605 if (ret < 0) 606 return ret; 607 return 0; 608 } 609 610 static int hulusb_set_channel(struct ieee802154_hw *hw, u8 page, u8 channel) 611 { 612 int rc; 613 int rssi_base_val; 614 615 struct atusb *lp = hw->priv; 616 617 if (channel == 0) 618 rc = atusb_write_subreg(lp, SR_SUB_MODE, 0); 619 else 620 rc = atusb_write_subreg(lp, SR_SUB_MODE, 1); 621 if (rc < 0) 622 return rc; 623 624 if (page == 0) { 625 rc = atusb_write_subreg(lp, SR_BPSK_QPSK, 0); 626 rssi_base_val = -100; 627 } else { 628 rc = atusb_write_subreg(lp, SR_BPSK_QPSK, 1); 629 rssi_base_val = -98; 630 } 631 if (rc < 0) 632 return rc; 633 634 rc = hulusb_set_cca_ed_level(lp, rssi_base_val); 635 if (rc < 0) 636 return rc; 637 638 return atusb_write_subreg(lp, SR_CHANNEL, channel); 639 } 640 641 static int 642 atusb_set_csma_params(struct ieee802154_hw *hw, u8 min_be, u8 max_be, u8 retries) 643 { 644 struct atusb *atusb = hw->priv; 645 int ret; 646 647 ret = atusb_write_subreg(atusb, SR_MIN_BE, min_be); 648 if (ret) 649 return ret; 650 651 ret = atusb_write_subreg(atusb, SR_MAX_BE, max_be); 652 if (ret) 653 return ret; 654 655 return atusb_write_subreg(atusb, SR_MAX_CSMA_RETRIES, retries); 656 } 657 658 static int 659 hulusb_set_lbt(struct ieee802154_hw *hw, bool on) 660 { 661 struct atusb *atusb = hw->priv; 662 663 return atusb_write_subreg(atusb, SR_CSMA_LBT_MODE, on); 664 } 665 666 static int 667 atusb_set_frame_retries(struct ieee802154_hw *hw, s8 retries) 668 { 669 struct atusb *atusb = hw->priv; 670 671 return atusb_write_subreg(atusb, SR_MAX_FRAME_RETRIES, retries); 672 } 673 674 static int 675 atusb_set_promiscuous_mode(struct ieee802154_hw *hw, const bool on) 676 { 677 struct atusb *atusb = hw->priv; 678 int ret; 679 680 if (on) { 681 ret = atusb_write_subreg(atusb, SR_AACK_DIS_ACK, 1); 682 if (ret < 0) 683 return ret; 684 685 ret = atusb_write_subreg(atusb, SR_AACK_PROM_MODE, 1); 686 if (ret < 0) 687 return ret; 688 } else { 689 ret = atusb_write_subreg(atusb, SR_AACK_PROM_MODE, 0); 690 if (ret < 0) 691 return ret; 692 693 ret = atusb_write_subreg(atusb, SR_AACK_DIS_ACK, 0); 694 if (ret < 0) 695 return ret; 696 } 697 698 return 0; 699 } 700 701 static struct atusb_chip_data atusb_chip_data = { 702 .t_channel_switch = 1, 703 .rssi_base_val = -91, 704 .set_txpower = atusb_set_txpower, 705 .set_channel = atusb_set_channel, 706 }; 707 708 static struct atusb_chip_data hulusb_chip_data = { 709 .t_channel_switch = 11, 710 .rssi_base_val = -100, 711 .set_txpower = hulusb_set_txpower, 712 .set_channel = hulusb_set_channel, 713 }; 714 715 static const struct ieee802154_ops atusb_ops = { 716 .owner = THIS_MODULE, 717 .xmit_async = atusb_xmit, 718 .ed = atusb_ed, 719 .set_channel = atusb_channel, 720 .start = atusb_start, 721 .stop = atusb_stop, 722 .set_hw_addr_filt = atusb_set_hw_addr_filt, 723 .set_txpower = atusb_txpower, 724 .set_lbt = hulusb_set_lbt, 725 .set_cca_mode = atusb_set_cca_mode, 726 .set_cca_ed_level = atusb_set_cca_ed_level, 727 .set_csma_params = atusb_set_csma_params, 728 .set_frame_retries = atusb_set_frame_retries, 729 .set_promiscuous_mode = atusb_set_promiscuous_mode, 730 }; 731 732 /* ----- Firmware and chip version information ----------------------------- */ 733 734 static int atusb_get_and_show_revision(struct atusb *atusb) 735 { 736 struct usb_device *usb_dev = atusb->usb_dev; 737 char *hw_name; 738 unsigned char buffer[3]; 739 int ret; 740 741 /* Get a couple of the ATMega Firmware values */ 742 ret = usb_control_msg_recv(atusb->usb_dev, 0, ATUSB_ID, ATUSB_REQ_FROM_DEV, 0, 0, 743 buffer, 3, 1000, GFP_KERNEL); 744 if (!ret) { 745 atusb->fw_ver_maj = buffer[0]; 746 atusb->fw_ver_min = buffer[1]; 747 atusb->fw_hw_type = buffer[2]; 748 749 switch (atusb->fw_hw_type) { 750 case ATUSB_HW_TYPE_100813: 751 case ATUSB_HW_TYPE_101216: 752 case ATUSB_HW_TYPE_110131: 753 hw_name = "ATUSB"; 754 atusb->data = &atusb_chip_data; 755 break; 756 case ATUSB_HW_TYPE_RZUSB: 757 hw_name = "RZUSB"; 758 atusb->data = &atusb_chip_data; 759 break; 760 case ATUSB_HW_TYPE_HULUSB: 761 hw_name = "HULUSB"; 762 atusb->data = &hulusb_chip_data; 763 break; 764 default: 765 hw_name = "UNKNOWN"; 766 atusb->err = -ENOTSUPP; 767 ret = -ENOTSUPP; 768 break; 769 } 770 771 dev_info(&usb_dev->dev, 772 "Firmware: major: %u, minor: %u, hardware type: %s (%d)\n", 773 atusb->fw_ver_maj, atusb->fw_ver_min, hw_name, 774 atusb->fw_hw_type); 775 } 776 if (atusb->fw_ver_maj == 0 && atusb->fw_ver_min < 2) { 777 dev_info(&usb_dev->dev, 778 "Firmware version (%u.%u) predates our first public release.", 779 atusb->fw_ver_maj, atusb->fw_ver_min); 780 dev_info(&usb_dev->dev, "Please update to version 0.2 or newer"); 781 } 782 783 return ret; 784 } 785 786 static int atusb_get_and_show_build(struct atusb *atusb) 787 { 788 struct usb_device *usb_dev = atusb->usb_dev; 789 char *build; 790 int ret; 791 792 build = kmalloc(ATUSB_BUILD_SIZE + 1, GFP_KERNEL); 793 if (!build) 794 return -ENOMEM; 795 796 ret = usb_control_msg(atusb->usb_dev, usb_rcvctrlpipe(usb_dev, 0), ATUSB_BUILD, 797 ATUSB_REQ_FROM_DEV, 0, 0, build, ATUSB_BUILD_SIZE, 1000); 798 if (ret >= 0) { 799 build[ret] = 0; 800 dev_info(&usb_dev->dev, "Firmware: build %s\n", build); 801 } 802 803 kfree(build); 804 return ret; 805 } 806 807 static int atusb_get_and_conf_chip(struct atusb *atusb) 808 { 809 struct usb_device *usb_dev = atusb->usb_dev; 810 u8 man_id_0, man_id_1, part_num, version_num; 811 const char *chip; 812 struct ieee802154_hw *hw = atusb->hw; 813 int ret; 814 815 ret = usb_control_msg_recv(usb_dev, 0, ATUSB_REG_READ, ATUSB_REQ_FROM_DEV, 816 0, RG_MAN_ID_0, &man_id_0, 1, 1000, GFP_KERNEL); 817 if (ret < 0) 818 return ret; 819 820 ret = usb_control_msg_recv(usb_dev, 0, ATUSB_REG_READ, ATUSB_REQ_FROM_DEV, 821 0, RG_MAN_ID_1, &man_id_1, 1, 1000, GFP_KERNEL); 822 if (ret < 0) 823 return ret; 824 825 ret = usb_control_msg_recv(usb_dev, 0, ATUSB_REG_READ, ATUSB_REQ_FROM_DEV, 826 0, RG_PART_NUM, &part_num, 1, 1000, GFP_KERNEL); 827 if (ret < 0) 828 return ret; 829 830 ret = usb_control_msg_recv(usb_dev, 0, ATUSB_REG_READ, ATUSB_REQ_FROM_DEV, 831 0, RG_VERSION_NUM, &version_num, 1, 1000, GFP_KERNEL); 832 if (ret < 0) 833 return ret; 834 835 hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AFILT | 836 IEEE802154_HW_PROMISCUOUS | IEEE802154_HW_CSMA_PARAMS; 837 838 hw->phy->flags = WPAN_PHY_FLAG_TXPOWER | WPAN_PHY_FLAG_CCA_ED_LEVEL | 839 WPAN_PHY_FLAG_CCA_MODE; 840 841 hw->phy->supported.cca_modes = BIT(NL802154_CCA_ENERGY) | 842 BIT(NL802154_CCA_CARRIER) | 843 BIT(NL802154_CCA_ENERGY_CARRIER); 844 hw->phy->supported.cca_opts = BIT(NL802154_CCA_OPT_ENERGY_CARRIER_AND) | 845 BIT(NL802154_CCA_OPT_ENERGY_CARRIER_OR); 846 847 hw->phy->cca.mode = NL802154_CCA_ENERGY; 848 849 hw->phy->current_page = 0; 850 851 if ((man_id_1 << 8 | man_id_0) != ATUSB_JEDEC_ATMEL) { 852 dev_err(&usb_dev->dev, 853 "non-Atmel transceiver xxxx%02x%02x\n", 854 man_id_1, man_id_0); 855 goto fail; 856 } 857 858 switch (part_num) { 859 case 2: 860 chip = "AT86RF230"; 861 atusb->hw->phy->supported.channels[0] = 0x7FFF800; 862 atusb->hw->phy->current_channel = 11; /* reset default */ 863 atusb->hw->phy->supported.tx_powers = atusb_powers; 864 atusb->hw->phy->supported.tx_powers_size = ARRAY_SIZE(atusb_powers); 865 hw->phy->supported.cca_ed_levels = atusb_ed_levels; 866 hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(atusb_ed_levels); 867 break; 868 case 3: 869 chip = "AT86RF231"; 870 atusb->hw->phy->supported.channels[0] = 0x7FFF800; 871 atusb->hw->phy->current_channel = 11; /* reset default */ 872 atusb->hw->phy->supported.tx_powers = atusb_powers; 873 atusb->hw->phy->supported.tx_powers_size = ARRAY_SIZE(atusb_powers); 874 hw->phy->supported.cca_ed_levels = atusb_ed_levels; 875 hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(atusb_ed_levels); 876 break; 877 case 7: 878 chip = "AT86RF212"; 879 atusb->hw->flags |= IEEE802154_HW_LBT; 880 atusb->hw->phy->supported.channels[0] = 0x00007FF; 881 atusb->hw->phy->supported.channels[2] = 0x00007FF; 882 atusb->hw->phy->current_channel = 5; 883 atusb->hw->phy->supported.lbt = NL802154_SUPPORTED_BOOL_BOTH; 884 atusb->hw->phy->supported.tx_powers = at86rf212_powers; 885 atusb->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf212_powers); 886 atusb->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_100; 887 atusb->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_100); 888 break; 889 default: 890 dev_err(&usb_dev->dev, 891 "unexpected transceiver, part 0x%02x version 0x%02x\n", 892 part_num, version_num); 893 goto fail; 894 } 895 896 hw->phy->transmit_power = hw->phy->supported.tx_powers[0]; 897 hw->phy->cca_ed_level = hw->phy->supported.cca_ed_levels[7]; 898 899 dev_info(&usb_dev->dev, "ATUSB: %s version %d\n", chip, version_num); 900 901 return 0; 902 903 fail: 904 atusb->err = -ENODEV; 905 return -ENODEV; 906 } 907 908 static int atusb_set_extended_addr(struct atusb *atusb) 909 { 910 struct usb_device *usb_dev = atusb->usb_dev; 911 unsigned char buffer[IEEE802154_EXTENDED_ADDR_LEN]; 912 __le64 extended_addr; 913 u64 addr; 914 int ret; 915 916 /* Firmware versions before 0.3 do not support the EUI64_READ command. 917 * Just use a random address and be done. 918 */ 919 if (atusb->fw_ver_maj == 0 && atusb->fw_ver_min < 3) { 920 ieee802154_random_extended_addr(&atusb->hw->phy->perm_extended_addr); 921 return 0; 922 } 923 924 /* Firmware is new enough so we fetch the address from EEPROM */ 925 ret = usb_control_msg_recv(atusb->usb_dev, 0, ATUSB_EUI64_READ, ATUSB_REQ_FROM_DEV, 0, 0, 926 buffer, IEEE802154_EXTENDED_ADDR_LEN, 1000, GFP_KERNEL); 927 if (ret < 0) { 928 dev_err(&usb_dev->dev, "failed to fetch extended address, random address set\n"); 929 ieee802154_random_extended_addr(&atusb->hw->phy->perm_extended_addr); 930 return ret; 931 } 932 933 memcpy(&extended_addr, buffer, IEEE802154_EXTENDED_ADDR_LEN); 934 /* Check if read address is not empty and the unicast bit is set correctly */ 935 if (!ieee802154_is_valid_extended_unicast_addr(extended_addr)) { 936 dev_info(&usb_dev->dev, "no permanent extended address found, random address set\n"); 937 ieee802154_random_extended_addr(&atusb->hw->phy->perm_extended_addr); 938 } else { 939 atusb->hw->phy->perm_extended_addr = extended_addr; 940 addr = swab64((__force u64)atusb->hw->phy->perm_extended_addr); 941 dev_info(&usb_dev->dev, "Read permanent extended address %8phC from device\n", 942 &addr); 943 } 944 945 return ret; 946 } 947 948 /* ----- Setup ------------------------------------------------------------- */ 949 950 static int atusb_probe(struct usb_interface *interface, 951 const struct usb_device_id *id) 952 { 953 struct usb_device *usb_dev = interface_to_usbdev(interface); 954 struct ieee802154_hw *hw; 955 struct atusb *atusb = NULL; 956 int ret = -ENOMEM; 957 958 hw = ieee802154_alloc_hw(sizeof(struct atusb), &atusb_ops); 959 if (!hw) 960 return -ENOMEM; 961 962 atusb = hw->priv; 963 atusb->hw = hw; 964 atusb->usb_dev = usb_get_dev(usb_dev); 965 usb_set_intfdata(interface, atusb); 966 967 atusb->shutdown = 0; 968 atusb->err = 0; 969 INIT_DELAYED_WORK(&atusb->work, atusb_work_urbs); 970 init_usb_anchor(&atusb->idle_urbs); 971 init_usb_anchor(&atusb->rx_urbs); 972 973 if (atusb_alloc_urbs(atusb, ATUSB_NUM_RX_URBS)) 974 goto fail; 975 976 atusb->tx_dr.bRequestType = ATUSB_REQ_TO_DEV; 977 atusb->tx_dr.bRequest = ATUSB_TX; 978 atusb->tx_dr.wValue = cpu_to_le16(0); 979 980 atusb->tx_urb = usb_alloc_urb(0, GFP_KERNEL); 981 if (!atusb->tx_urb) 982 goto fail; 983 984 hw->parent = &usb_dev->dev; 985 986 usb_control_msg_send(atusb->usb_dev, 0, ATUSB_RF_RESET, ATUSB_REQ_TO_DEV, 0, 0, 987 NULL, 0, 1000, GFP_KERNEL); 988 atusb_get_and_conf_chip(atusb); 989 atusb_get_and_show_revision(atusb); 990 atusb_get_and_show_build(atusb); 991 atusb_set_extended_addr(atusb); 992 993 if ((atusb->fw_ver_maj == 0 && atusb->fw_ver_min >= 3) || atusb->fw_ver_maj > 0) 994 hw->flags |= IEEE802154_HW_FRAME_RETRIES; 995 996 ret = atusb_get_and_clear_error(atusb); 997 if (ret) { 998 dev_err(&atusb->usb_dev->dev, 999 "%s: initialization failed, error = %d\n", 1000 __func__, ret); 1001 goto fail; 1002 } 1003 1004 ret = ieee802154_register_hw(hw); 1005 if (ret) 1006 goto fail; 1007 1008 /* If we just powered on, we're now in P_ON and need to enter TRX_OFF 1009 * explicitly. Any resets after that will send us straight to TRX_OFF, 1010 * making the command below redundant. 1011 */ 1012 usb_control_msg_send(atusb->usb_dev, 0, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV, 1013 STATE_FORCE_TRX_OFF, RG_TRX_STATE, NULL, 0, 1000, GFP_KERNEL); 1014 1015 msleep(1); /* reset => TRX_OFF, tTR13 = 37 us */ 1016 1017 #if 0 1018 /* Calculating the maximum time available to empty the frame buffer 1019 * on reception: 1020 * 1021 * According to [1], the inter-frame gap is 1022 * R * 20 * 16 us + 128 us 1023 * where R is a random number from 0 to 7. Furthermore, we have 20 bit 1024 * times (80 us at 250 kbps) of SHR of the next frame before the 1025 * transceiver begins storing data in the frame buffer. 1026 * 1027 * This yields a minimum time of 208 us between the last data of a 1028 * frame and the first data of the next frame. This time is further 1029 * reduced by interrupt latency in the atusb firmware. 1030 * 1031 * atusb currently needs about 500 us to retrieve a maximum-sized 1032 * frame. We therefore have to allow reception of a new frame to begin 1033 * while we retrieve the previous frame. 1034 * 1035 * [1] "JN-AN-1035 Calculating data rates in an IEEE 802.15.4-based 1036 * network", Jennic 2006. 1037 * http://www.jennic.com/download_file.php?supportFile=JN-AN-1035%20Calculating%20802-15-4%20Data%20Rates-1v0.pdf 1038 */ 1039 1040 atusb_write_subreg(atusb, SR_RX_SAFE_MODE, 1); 1041 #endif 1042 usb_control_msg_send(atusb->usb_dev, 0, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV, 1043 0xff, RG_IRQ_MASK, NULL, 0, 1000, GFP_KERNEL); 1044 1045 ret = atusb_get_and_clear_error(atusb); 1046 if (!ret) 1047 return 0; 1048 1049 dev_err(&atusb->usb_dev->dev, 1050 "%s: setup failed, error = %d\n", 1051 __func__, ret); 1052 1053 ieee802154_unregister_hw(hw); 1054 fail: 1055 atusb_free_urbs(atusb); 1056 usb_kill_urb(atusb->tx_urb); 1057 usb_free_urb(atusb->tx_urb); 1058 usb_put_dev(usb_dev); 1059 ieee802154_free_hw(hw); 1060 return ret; 1061 } 1062 1063 static void atusb_disconnect(struct usb_interface *interface) 1064 { 1065 struct atusb *atusb = usb_get_intfdata(interface); 1066 1067 dev_dbg(&atusb->usb_dev->dev, "%s\n", __func__); 1068 1069 atusb->shutdown = 1; 1070 cancel_delayed_work_sync(&atusb->work); 1071 1072 usb_kill_anchored_urbs(&atusb->rx_urbs); 1073 atusb_free_urbs(atusb); 1074 usb_kill_urb(atusb->tx_urb); 1075 usb_free_urb(atusb->tx_urb); 1076 1077 ieee802154_unregister_hw(atusb->hw); 1078 1079 usb_put_dev(atusb->usb_dev); 1080 1081 ieee802154_free_hw(atusb->hw); 1082 1083 usb_set_intfdata(interface, NULL); 1084 1085 pr_debug("%s done\n", __func__); 1086 } 1087 1088 /* The devices we work with */ 1089 static const struct usb_device_id atusb_device_table[] = { 1090 { 1091 .match_flags = USB_DEVICE_ID_MATCH_DEVICE | 1092 USB_DEVICE_ID_MATCH_INT_INFO, 1093 .idVendor = ATUSB_VENDOR_ID, 1094 .idProduct = ATUSB_PRODUCT_ID, 1095 .bInterfaceClass = USB_CLASS_VENDOR_SPEC 1096 }, 1097 /* end with null element */ 1098 {} 1099 }; 1100 MODULE_DEVICE_TABLE(usb, atusb_device_table); 1101 1102 static struct usb_driver atusb_driver = { 1103 .name = "atusb", 1104 .probe = atusb_probe, 1105 .disconnect = atusb_disconnect, 1106 .id_table = atusb_device_table, 1107 }; 1108 module_usb_driver(atusb_driver); 1109 1110 MODULE_AUTHOR("Alexander Aring <alex.aring@gmail.com>"); 1111 MODULE_AUTHOR("Richard Sharpe <realrichardsharpe@gmail.com>"); 1112 MODULE_AUTHOR("Stefan Schmidt <stefan@datenfreihafen.org>"); 1113 MODULE_AUTHOR("Werner Almesberger <werner@almesberger.net>"); 1114 MODULE_AUTHOR("Josef Filzmaier <j.filzmaier@gmx.at>"); 1115 MODULE_DESCRIPTION("ATUSB IEEE 802.15.4 Driver"); 1116 MODULE_LICENSE("GPL"); 1117