1 /* 2 * AT86RF230/RF231 driver 3 * 4 * Copyright (C) 2009-2012 Siemens AG 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License version 2 8 * as published by the Free Software Foundation. 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 * 15 * Written by: 16 * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> 17 * Alexander Smirnov <alex.bluesman.smirnov@gmail.com> 18 * Alexander Aring <aar@pengutronix.de> 19 */ 20 #include <linux/kernel.h> 21 #include <linux/module.h> 22 #include <linux/hrtimer.h> 23 #include <linux/jiffies.h> 24 #include <linux/interrupt.h> 25 #include <linux/irq.h> 26 #include <linux/gpio.h> 27 #include <linux/delay.h> 28 #include <linux/spi/spi.h> 29 #include <linux/spi/at86rf230.h> 30 #include <linux/regmap.h> 31 #include <linux/skbuff.h> 32 #include <linux/of_gpio.h> 33 #include <linux/ieee802154.h> 34 #include <linux/debugfs.h> 35 36 #include <net/mac802154.h> 37 #include <net/cfg802154.h> 38 39 #include "at86rf230.h" 40 41 struct at86rf230_local; 42 /* at86rf2xx chip depend data. 43 * All timings are in us. 44 */ 45 struct at86rf2xx_chip_data { 46 u16 t_sleep_cycle; 47 u16 t_channel_switch; 48 u16 t_reset_to_off; 49 u16 t_off_to_aack; 50 u16 t_off_to_tx_on; 51 u16 t_off_to_sleep; 52 u16 t_sleep_to_off; 53 u16 t_frame; 54 u16 t_p_ack; 55 int rssi_base_val; 56 57 int (*set_channel)(struct at86rf230_local *, u8, u8); 58 int (*set_txpower)(struct at86rf230_local *, s32); 59 }; 60 61 #define AT86RF2XX_MAX_BUF (127 + 3) 62 /* tx retries to access the TX_ON state 63 * if it's above then force change will be started. 64 * 65 * We assume the max_frame_retries (7) value of 802.15.4 here. 66 */ 67 #define AT86RF2XX_MAX_TX_RETRIES 7 68 /* We use the recommended 5 minutes timeout to recalibrate */ 69 #define AT86RF2XX_CAL_LOOP_TIMEOUT (5 * 60 * HZ) 70 71 struct at86rf230_state_change { 72 struct at86rf230_local *lp; 73 int irq; 74 75 struct hrtimer timer; 76 struct spi_message msg; 77 struct spi_transfer trx; 78 u8 buf[AT86RF2XX_MAX_BUF]; 79 80 void (*complete)(void *context); 81 u8 from_state; 82 u8 to_state; 83 84 bool free; 85 }; 86 87 struct at86rf230_trac { 88 u64 success; 89 u64 success_data_pending; 90 u64 success_wait_for_ack; 91 u64 channel_access_failure; 92 u64 no_ack; 93 u64 invalid; 94 }; 95 96 struct at86rf230_local { 97 struct spi_device *spi; 98 99 struct ieee802154_hw *hw; 100 struct at86rf2xx_chip_data *data; 101 struct regmap *regmap; 102 int slp_tr; 103 bool sleep; 104 105 struct completion state_complete; 106 struct at86rf230_state_change state; 107 108 unsigned long cal_timeout; 109 bool is_tx; 110 bool is_tx_from_off; 111 u8 tx_retry; 112 struct sk_buff *tx_skb; 113 struct at86rf230_state_change tx; 114 115 struct at86rf230_trac trac; 116 }; 117 118 #define AT86RF2XX_NUMREGS 0x3F 119 120 static void 121 at86rf230_async_state_change(struct at86rf230_local *lp, 122 struct at86rf230_state_change *ctx, 123 const u8 state, void (*complete)(void *context)); 124 125 static inline void 126 at86rf230_sleep(struct at86rf230_local *lp) 127 { 128 if (gpio_is_valid(lp->slp_tr)) { 129 gpio_set_value(lp->slp_tr, 1); 130 usleep_range(lp->data->t_off_to_sleep, 131 lp->data->t_off_to_sleep + 10); 132 lp->sleep = true; 133 } 134 } 135 136 static inline void 137 at86rf230_awake(struct at86rf230_local *lp) 138 { 139 if (gpio_is_valid(lp->slp_tr)) { 140 gpio_set_value(lp->slp_tr, 0); 141 usleep_range(lp->data->t_sleep_to_off, 142 lp->data->t_sleep_to_off + 100); 143 lp->sleep = false; 144 } 145 } 146 147 static inline int 148 __at86rf230_write(struct at86rf230_local *lp, 149 unsigned int addr, unsigned int data) 150 { 151 bool sleep = lp->sleep; 152 int ret; 153 154 /* awake for register setting if sleep */ 155 if (sleep) 156 at86rf230_awake(lp); 157 158 ret = regmap_write(lp->regmap, addr, data); 159 160 /* sleep again if was sleeping */ 161 if (sleep) 162 at86rf230_sleep(lp); 163 164 return ret; 165 } 166 167 static inline int 168 __at86rf230_read(struct at86rf230_local *lp, 169 unsigned int addr, unsigned int *data) 170 { 171 bool sleep = lp->sleep; 172 int ret; 173 174 /* awake for register setting if sleep */ 175 if (sleep) 176 at86rf230_awake(lp); 177 178 ret = regmap_read(lp->regmap, addr, data); 179 180 /* sleep again if was sleeping */ 181 if (sleep) 182 at86rf230_sleep(lp); 183 184 return ret; 185 } 186 187 static inline int 188 at86rf230_read_subreg(struct at86rf230_local *lp, 189 unsigned int addr, unsigned int mask, 190 unsigned int shift, unsigned int *data) 191 { 192 int rc; 193 194 rc = __at86rf230_read(lp, addr, data); 195 if (!rc) 196 *data = (*data & mask) >> shift; 197 198 return rc; 199 } 200 201 static inline int 202 at86rf230_write_subreg(struct at86rf230_local *lp, 203 unsigned int addr, unsigned int mask, 204 unsigned int shift, unsigned int data) 205 { 206 bool sleep = lp->sleep; 207 int ret; 208 209 /* awake for register setting if sleep */ 210 if (sleep) 211 at86rf230_awake(lp); 212 213 ret = regmap_update_bits(lp->regmap, addr, mask, data << shift); 214 215 /* sleep again if was sleeping */ 216 if (sleep) 217 at86rf230_sleep(lp); 218 219 return ret; 220 } 221 222 static inline void 223 at86rf230_slp_tr_rising_edge(struct at86rf230_local *lp) 224 { 225 gpio_set_value(lp->slp_tr, 1); 226 udelay(1); 227 gpio_set_value(lp->slp_tr, 0); 228 } 229 230 static bool 231 at86rf230_reg_writeable(struct device *dev, unsigned int reg) 232 { 233 switch (reg) { 234 case RG_TRX_STATE: 235 case RG_TRX_CTRL_0: 236 case RG_TRX_CTRL_1: 237 case RG_PHY_TX_PWR: 238 case RG_PHY_ED_LEVEL: 239 case RG_PHY_CC_CCA: 240 case RG_CCA_THRES: 241 case RG_RX_CTRL: 242 case RG_SFD_VALUE: 243 case RG_TRX_CTRL_2: 244 case RG_ANT_DIV: 245 case RG_IRQ_MASK: 246 case RG_VREG_CTRL: 247 case RG_BATMON: 248 case RG_XOSC_CTRL: 249 case RG_RX_SYN: 250 case RG_XAH_CTRL_1: 251 case RG_FTN_CTRL: 252 case RG_PLL_CF: 253 case RG_PLL_DCU: 254 case RG_SHORT_ADDR_0: 255 case RG_SHORT_ADDR_1: 256 case RG_PAN_ID_0: 257 case RG_PAN_ID_1: 258 case RG_IEEE_ADDR_0: 259 case RG_IEEE_ADDR_1: 260 case RG_IEEE_ADDR_2: 261 case RG_IEEE_ADDR_3: 262 case RG_IEEE_ADDR_4: 263 case RG_IEEE_ADDR_5: 264 case RG_IEEE_ADDR_6: 265 case RG_IEEE_ADDR_7: 266 case RG_XAH_CTRL_0: 267 case RG_CSMA_SEED_0: 268 case RG_CSMA_SEED_1: 269 case RG_CSMA_BE: 270 return true; 271 default: 272 return false; 273 } 274 } 275 276 static bool 277 at86rf230_reg_readable(struct device *dev, unsigned int reg) 278 { 279 bool rc; 280 281 /* all writeable are also readable */ 282 rc = at86rf230_reg_writeable(dev, reg); 283 if (rc) 284 return rc; 285 286 /* readonly regs */ 287 switch (reg) { 288 case RG_TRX_STATUS: 289 case RG_PHY_RSSI: 290 case RG_IRQ_STATUS: 291 case RG_PART_NUM: 292 case RG_VERSION_NUM: 293 case RG_MAN_ID_1: 294 case RG_MAN_ID_0: 295 return true; 296 default: 297 return false; 298 } 299 } 300 301 static bool 302 at86rf230_reg_volatile(struct device *dev, unsigned int reg) 303 { 304 /* can be changed during runtime */ 305 switch (reg) { 306 case RG_TRX_STATUS: 307 case RG_TRX_STATE: 308 case RG_PHY_RSSI: 309 case RG_PHY_ED_LEVEL: 310 case RG_IRQ_STATUS: 311 case RG_VREG_CTRL: 312 case RG_PLL_CF: 313 case RG_PLL_DCU: 314 return true; 315 default: 316 return false; 317 } 318 } 319 320 static bool 321 at86rf230_reg_precious(struct device *dev, unsigned int reg) 322 { 323 /* don't clear irq line on read */ 324 switch (reg) { 325 case RG_IRQ_STATUS: 326 return true; 327 default: 328 return false; 329 } 330 } 331 332 static const struct regmap_config at86rf230_regmap_spi_config = { 333 .reg_bits = 8, 334 .val_bits = 8, 335 .write_flag_mask = CMD_REG | CMD_WRITE, 336 .read_flag_mask = CMD_REG, 337 .cache_type = REGCACHE_RBTREE, 338 .max_register = AT86RF2XX_NUMREGS, 339 .writeable_reg = at86rf230_reg_writeable, 340 .readable_reg = at86rf230_reg_readable, 341 .volatile_reg = at86rf230_reg_volatile, 342 .precious_reg = at86rf230_reg_precious, 343 }; 344 345 static void 346 at86rf230_async_error_recover_complete(void *context) 347 { 348 struct at86rf230_state_change *ctx = context; 349 struct at86rf230_local *lp = ctx->lp; 350 351 if (ctx->free) 352 kfree(ctx); 353 354 ieee802154_wake_queue(lp->hw); 355 } 356 357 static void 358 at86rf230_async_error_recover(void *context) 359 { 360 struct at86rf230_state_change *ctx = context; 361 struct at86rf230_local *lp = ctx->lp; 362 363 lp->is_tx = 0; 364 at86rf230_async_state_change(lp, ctx, STATE_RX_AACK_ON, 365 at86rf230_async_error_recover_complete); 366 } 367 368 static inline void 369 at86rf230_async_error(struct at86rf230_local *lp, 370 struct at86rf230_state_change *ctx, int rc) 371 { 372 dev_err(&lp->spi->dev, "spi_async error %d\n", rc); 373 374 at86rf230_async_state_change(lp, ctx, STATE_FORCE_TRX_OFF, 375 at86rf230_async_error_recover); 376 } 377 378 /* Generic function to get some register value in async mode */ 379 static void 380 at86rf230_async_read_reg(struct at86rf230_local *lp, u8 reg, 381 struct at86rf230_state_change *ctx, 382 void (*complete)(void *context)) 383 { 384 int rc; 385 386 u8 *tx_buf = ctx->buf; 387 388 tx_buf[0] = (reg & CMD_REG_MASK) | CMD_REG; 389 ctx->msg.complete = complete; 390 rc = spi_async(lp->spi, &ctx->msg); 391 if (rc) 392 at86rf230_async_error(lp, ctx, rc); 393 } 394 395 static void 396 at86rf230_async_write_reg(struct at86rf230_local *lp, u8 reg, u8 val, 397 struct at86rf230_state_change *ctx, 398 void (*complete)(void *context)) 399 { 400 int rc; 401 402 ctx->buf[0] = (reg & CMD_REG_MASK) | CMD_REG | CMD_WRITE; 403 ctx->buf[1] = val; 404 ctx->msg.complete = complete; 405 rc = spi_async(lp->spi, &ctx->msg); 406 if (rc) 407 at86rf230_async_error(lp, ctx, rc); 408 } 409 410 static void 411 at86rf230_async_state_assert(void *context) 412 { 413 struct at86rf230_state_change *ctx = context; 414 struct at86rf230_local *lp = ctx->lp; 415 const u8 *buf = ctx->buf; 416 const u8 trx_state = buf[1] & TRX_STATE_MASK; 417 418 /* Assert state change */ 419 if (trx_state != ctx->to_state) { 420 /* Special handling if transceiver state is in 421 * STATE_BUSY_RX_AACK and a SHR was detected. 422 */ 423 if (trx_state == STATE_BUSY_RX_AACK) { 424 /* Undocumented race condition. If we send a state 425 * change to STATE_RX_AACK_ON the transceiver could 426 * change his state automatically to STATE_BUSY_RX_AACK 427 * if a SHR was detected. This is not an error, but we 428 * can't assert this. 429 */ 430 if (ctx->to_state == STATE_RX_AACK_ON) 431 goto done; 432 433 /* If we change to STATE_TX_ON without forcing and 434 * transceiver state is STATE_BUSY_RX_AACK, we wait 435 * 'tFrame + tPAck' receiving time. In this time the 436 * PDU should be received. If the transceiver is still 437 * in STATE_BUSY_RX_AACK, we run a force state change 438 * to STATE_TX_ON. This is a timeout handling, if the 439 * transceiver stucks in STATE_BUSY_RX_AACK. 440 * 441 * Additional we do several retries to try to get into 442 * TX_ON state without forcing. If the retries are 443 * higher or equal than AT86RF2XX_MAX_TX_RETRIES we 444 * will do a force change. 445 */ 446 if (ctx->to_state == STATE_TX_ON || 447 ctx->to_state == STATE_TRX_OFF) { 448 u8 state = ctx->to_state; 449 450 if (lp->tx_retry >= AT86RF2XX_MAX_TX_RETRIES) 451 state = STATE_FORCE_TRX_OFF; 452 lp->tx_retry++; 453 454 at86rf230_async_state_change(lp, ctx, state, 455 ctx->complete); 456 return; 457 } 458 } 459 460 dev_warn(&lp->spi->dev, "unexcept state change from 0x%02x to 0x%02x. Actual state: 0x%02x\n", 461 ctx->from_state, ctx->to_state, trx_state); 462 } 463 464 done: 465 if (ctx->complete) 466 ctx->complete(context); 467 } 468 469 static enum hrtimer_restart at86rf230_async_state_timer(struct hrtimer *timer) 470 { 471 struct at86rf230_state_change *ctx = 472 container_of(timer, struct at86rf230_state_change, timer); 473 struct at86rf230_local *lp = ctx->lp; 474 475 at86rf230_async_read_reg(lp, RG_TRX_STATUS, ctx, 476 at86rf230_async_state_assert); 477 478 return HRTIMER_NORESTART; 479 } 480 481 /* Do state change timing delay. */ 482 static void 483 at86rf230_async_state_delay(void *context) 484 { 485 struct at86rf230_state_change *ctx = context; 486 struct at86rf230_local *lp = ctx->lp; 487 struct at86rf2xx_chip_data *c = lp->data; 488 bool force = false; 489 ktime_t tim; 490 491 /* The force state changes are will show as normal states in the 492 * state status subregister. We change the to_state to the 493 * corresponding one and remember if it was a force change, this 494 * differs if we do a state change from STATE_BUSY_RX_AACK. 495 */ 496 switch (ctx->to_state) { 497 case STATE_FORCE_TX_ON: 498 ctx->to_state = STATE_TX_ON; 499 force = true; 500 break; 501 case STATE_FORCE_TRX_OFF: 502 ctx->to_state = STATE_TRX_OFF; 503 force = true; 504 break; 505 default: 506 break; 507 } 508 509 switch (ctx->from_state) { 510 case STATE_TRX_OFF: 511 switch (ctx->to_state) { 512 case STATE_RX_AACK_ON: 513 tim = c->t_off_to_aack * NSEC_PER_USEC; 514 /* state change from TRX_OFF to RX_AACK_ON to do a 515 * calibration, we need to reset the timeout for the 516 * next one. 517 */ 518 lp->cal_timeout = jiffies + AT86RF2XX_CAL_LOOP_TIMEOUT; 519 goto change; 520 case STATE_TX_ARET_ON: 521 case STATE_TX_ON: 522 tim = c->t_off_to_tx_on * NSEC_PER_USEC; 523 /* state change from TRX_OFF to TX_ON or ARET_ON to do 524 * a calibration, we need to reset the timeout for the 525 * next one. 526 */ 527 lp->cal_timeout = jiffies + AT86RF2XX_CAL_LOOP_TIMEOUT; 528 goto change; 529 default: 530 break; 531 } 532 break; 533 case STATE_BUSY_RX_AACK: 534 switch (ctx->to_state) { 535 case STATE_TRX_OFF: 536 case STATE_TX_ON: 537 /* Wait for worst case receiving time if we 538 * didn't make a force change from BUSY_RX_AACK 539 * to TX_ON or TRX_OFF. 540 */ 541 if (!force) { 542 tim = (c->t_frame + c->t_p_ack) * NSEC_PER_USEC; 543 goto change; 544 } 545 break; 546 default: 547 break; 548 } 549 break; 550 /* Default value, means RESET state */ 551 case STATE_P_ON: 552 switch (ctx->to_state) { 553 case STATE_TRX_OFF: 554 tim = c->t_reset_to_off * NSEC_PER_USEC; 555 goto change; 556 default: 557 break; 558 } 559 break; 560 default: 561 break; 562 } 563 564 /* Default delay is 1us in the most cases */ 565 udelay(1); 566 at86rf230_async_state_timer(&ctx->timer); 567 return; 568 569 change: 570 hrtimer_start(&ctx->timer, tim, HRTIMER_MODE_REL); 571 } 572 573 static void 574 at86rf230_async_state_change_start(void *context) 575 { 576 struct at86rf230_state_change *ctx = context; 577 struct at86rf230_local *lp = ctx->lp; 578 u8 *buf = ctx->buf; 579 const u8 trx_state = buf[1] & TRX_STATE_MASK; 580 581 /* Check for "possible" STATE_TRANSITION_IN_PROGRESS */ 582 if (trx_state == STATE_TRANSITION_IN_PROGRESS) { 583 udelay(1); 584 at86rf230_async_read_reg(lp, RG_TRX_STATUS, ctx, 585 at86rf230_async_state_change_start); 586 return; 587 } 588 589 /* Check if we already are in the state which we change in */ 590 if (trx_state == ctx->to_state) { 591 if (ctx->complete) 592 ctx->complete(context); 593 return; 594 } 595 596 /* Set current state to the context of state change */ 597 ctx->from_state = trx_state; 598 599 /* Going into the next step for a state change which do a timing 600 * relevant delay. 601 */ 602 at86rf230_async_write_reg(lp, RG_TRX_STATE, ctx->to_state, ctx, 603 at86rf230_async_state_delay); 604 } 605 606 static void 607 at86rf230_async_state_change(struct at86rf230_local *lp, 608 struct at86rf230_state_change *ctx, 609 const u8 state, void (*complete)(void *context)) 610 { 611 /* Initialization for the state change context */ 612 ctx->to_state = state; 613 ctx->complete = complete; 614 at86rf230_async_read_reg(lp, RG_TRX_STATUS, ctx, 615 at86rf230_async_state_change_start); 616 } 617 618 static void 619 at86rf230_sync_state_change_complete(void *context) 620 { 621 struct at86rf230_state_change *ctx = context; 622 struct at86rf230_local *lp = ctx->lp; 623 624 complete(&lp->state_complete); 625 } 626 627 /* This function do a sync framework above the async state change. 628 * Some callbacks of the IEEE 802.15.4 driver interface need to be 629 * handled synchronously. 630 */ 631 static int 632 at86rf230_sync_state_change(struct at86rf230_local *lp, unsigned int state) 633 { 634 unsigned long rc; 635 636 at86rf230_async_state_change(lp, &lp->state, state, 637 at86rf230_sync_state_change_complete); 638 639 rc = wait_for_completion_timeout(&lp->state_complete, 640 msecs_to_jiffies(100)); 641 if (!rc) { 642 at86rf230_async_error(lp, &lp->state, -ETIMEDOUT); 643 return -ETIMEDOUT; 644 } 645 646 return 0; 647 } 648 649 static void 650 at86rf230_tx_complete(void *context) 651 { 652 struct at86rf230_state_change *ctx = context; 653 struct at86rf230_local *lp = ctx->lp; 654 655 ieee802154_xmit_complete(lp->hw, lp->tx_skb, false); 656 kfree(ctx); 657 } 658 659 static void 660 at86rf230_tx_on(void *context) 661 { 662 struct at86rf230_state_change *ctx = context; 663 struct at86rf230_local *lp = ctx->lp; 664 665 at86rf230_async_state_change(lp, ctx, STATE_RX_AACK_ON, 666 at86rf230_tx_complete); 667 } 668 669 static void 670 at86rf230_tx_trac_check(void *context) 671 { 672 struct at86rf230_state_change *ctx = context; 673 struct at86rf230_local *lp = ctx->lp; 674 675 if (IS_ENABLED(CONFIG_IEEE802154_AT86RF230_DEBUGFS)) { 676 u8 trac = TRAC_MASK(ctx->buf[1]); 677 678 switch (trac) { 679 case TRAC_SUCCESS: 680 lp->trac.success++; 681 break; 682 case TRAC_SUCCESS_DATA_PENDING: 683 lp->trac.success_data_pending++; 684 break; 685 case TRAC_CHANNEL_ACCESS_FAILURE: 686 lp->trac.channel_access_failure++; 687 break; 688 case TRAC_NO_ACK: 689 lp->trac.no_ack++; 690 break; 691 case TRAC_INVALID: 692 lp->trac.invalid++; 693 break; 694 default: 695 WARN_ONCE(1, "received tx trac status %d\n", trac); 696 break; 697 } 698 } 699 700 at86rf230_async_state_change(lp, ctx, STATE_TX_ON, at86rf230_tx_on); 701 } 702 703 static void 704 at86rf230_rx_read_frame_complete(void *context) 705 { 706 struct at86rf230_state_change *ctx = context; 707 struct at86rf230_local *lp = ctx->lp; 708 const u8 *buf = ctx->buf; 709 struct sk_buff *skb; 710 u8 len, lqi; 711 712 len = buf[1]; 713 if (!ieee802154_is_valid_psdu_len(len)) { 714 dev_vdbg(&lp->spi->dev, "corrupted frame received\n"); 715 len = IEEE802154_MTU; 716 } 717 lqi = buf[2 + len]; 718 719 skb = dev_alloc_skb(IEEE802154_MTU); 720 if (!skb) { 721 dev_vdbg(&lp->spi->dev, "failed to allocate sk_buff\n"); 722 kfree(ctx); 723 return; 724 } 725 726 skb_put_data(skb, buf + 2, len); 727 ieee802154_rx_irqsafe(lp->hw, skb, lqi); 728 kfree(ctx); 729 } 730 731 static void 732 at86rf230_rx_trac_check(void *context) 733 { 734 struct at86rf230_state_change *ctx = context; 735 struct at86rf230_local *lp = ctx->lp; 736 u8 *buf = ctx->buf; 737 int rc; 738 739 if (IS_ENABLED(CONFIG_IEEE802154_AT86RF230_DEBUGFS)) { 740 u8 trac = TRAC_MASK(buf[1]); 741 742 switch (trac) { 743 case TRAC_SUCCESS: 744 lp->trac.success++; 745 break; 746 case TRAC_SUCCESS_WAIT_FOR_ACK: 747 lp->trac.success_wait_for_ack++; 748 break; 749 case TRAC_INVALID: 750 lp->trac.invalid++; 751 break; 752 default: 753 WARN_ONCE(1, "received rx trac status %d\n", trac); 754 break; 755 } 756 } 757 758 buf[0] = CMD_FB; 759 ctx->trx.len = AT86RF2XX_MAX_BUF; 760 ctx->msg.complete = at86rf230_rx_read_frame_complete; 761 rc = spi_async(lp->spi, &ctx->msg); 762 if (rc) { 763 ctx->trx.len = 2; 764 at86rf230_async_error(lp, ctx, rc); 765 } 766 } 767 768 static void 769 at86rf230_irq_trx_end(void *context) 770 { 771 struct at86rf230_state_change *ctx = context; 772 struct at86rf230_local *lp = ctx->lp; 773 774 if (lp->is_tx) { 775 lp->is_tx = 0; 776 at86rf230_async_read_reg(lp, RG_TRX_STATE, ctx, 777 at86rf230_tx_trac_check); 778 } else { 779 at86rf230_async_read_reg(lp, RG_TRX_STATE, ctx, 780 at86rf230_rx_trac_check); 781 } 782 } 783 784 static void 785 at86rf230_irq_status(void *context) 786 { 787 struct at86rf230_state_change *ctx = context; 788 struct at86rf230_local *lp = ctx->lp; 789 const u8 *buf = ctx->buf; 790 u8 irq = buf[1]; 791 792 enable_irq(lp->spi->irq); 793 794 if (irq & IRQ_TRX_END) { 795 at86rf230_irq_trx_end(ctx); 796 } else { 797 dev_err(&lp->spi->dev, "not supported irq %02x received\n", 798 irq); 799 kfree(ctx); 800 } 801 } 802 803 static void 804 at86rf230_setup_spi_messages(struct at86rf230_local *lp, 805 struct at86rf230_state_change *state) 806 { 807 state->lp = lp; 808 state->irq = lp->spi->irq; 809 spi_message_init(&state->msg); 810 state->msg.context = state; 811 state->trx.len = 2; 812 state->trx.tx_buf = state->buf; 813 state->trx.rx_buf = state->buf; 814 spi_message_add_tail(&state->trx, &state->msg); 815 hrtimer_init(&state->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); 816 state->timer.function = at86rf230_async_state_timer; 817 } 818 819 static irqreturn_t at86rf230_isr(int irq, void *data) 820 { 821 struct at86rf230_local *lp = data; 822 struct at86rf230_state_change *ctx; 823 int rc; 824 825 disable_irq_nosync(irq); 826 827 ctx = kzalloc(sizeof(*ctx), GFP_ATOMIC); 828 if (!ctx) { 829 enable_irq(irq); 830 return IRQ_NONE; 831 } 832 833 at86rf230_setup_spi_messages(lp, ctx); 834 /* tell on error handling to free ctx */ 835 ctx->free = true; 836 837 ctx->buf[0] = (RG_IRQ_STATUS & CMD_REG_MASK) | CMD_REG; 838 ctx->msg.complete = at86rf230_irq_status; 839 rc = spi_async(lp->spi, &ctx->msg); 840 if (rc) { 841 at86rf230_async_error(lp, ctx, rc); 842 enable_irq(irq); 843 return IRQ_NONE; 844 } 845 846 return IRQ_HANDLED; 847 } 848 849 static void 850 at86rf230_write_frame_complete(void *context) 851 { 852 struct at86rf230_state_change *ctx = context; 853 struct at86rf230_local *lp = ctx->lp; 854 855 ctx->trx.len = 2; 856 857 if (gpio_is_valid(lp->slp_tr)) 858 at86rf230_slp_tr_rising_edge(lp); 859 else 860 at86rf230_async_write_reg(lp, RG_TRX_STATE, STATE_BUSY_TX, ctx, 861 NULL); 862 } 863 864 static void 865 at86rf230_write_frame(void *context) 866 { 867 struct at86rf230_state_change *ctx = context; 868 struct at86rf230_local *lp = ctx->lp; 869 struct sk_buff *skb = lp->tx_skb; 870 u8 *buf = ctx->buf; 871 int rc; 872 873 lp->is_tx = 1; 874 875 buf[0] = CMD_FB | CMD_WRITE; 876 buf[1] = skb->len + 2; 877 memcpy(buf + 2, skb->data, skb->len); 878 ctx->trx.len = skb->len + 2; 879 ctx->msg.complete = at86rf230_write_frame_complete; 880 rc = spi_async(lp->spi, &ctx->msg); 881 if (rc) { 882 ctx->trx.len = 2; 883 at86rf230_async_error(lp, ctx, rc); 884 } 885 } 886 887 static void 888 at86rf230_xmit_tx_on(void *context) 889 { 890 struct at86rf230_state_change *ctx = context; 891 struct at86rf230_local *lp = ctx->lp; 892 893 at86rf230_async_state_change(lp, ctx, STATE_TX_ARET_ON, 894 at86rf230_write_frame); 895 } 896 897 static void 898 at86rf230_xmit_start(void *context) 899 { 900 struct at86rf230_state_change *ctx = context; 901 struct at86rf230_local *lp = ctx->lp; 902 903 /* check if we change from off state */ 904 if (lp->is_tx_from_off) 905 at86rf230_async_state_change(lp, ctx, STATE_TX_ARET_ON, 906 at86rf230_write_frame); 907 else 908 at86rf230_async_state_change(lp, ctx, STATE_TX_ON, 909 at86rf230_xmit_tx_on); 910 } 911 912 static int 913 at86rf230_xmit(struct ieee802154_hw *hw, struct sk_buff *skb) 914 { 915 struct at86rf230_local *lp = hw->priv; 916 struct at86rf230_state_change *ctx = &lp->tx; 917 918 lp->tx_skb = skb; 919 lp->tx_retry = 0; 920 921 /* After 5 minutes in PLL and the same frequency we run again the 922 * calibration loops which is recommended by at86rf2xx datasheets. 923 * 924 * The calibration is initiate by a state change from TRX_OFF 925 * to TX_ON, the lp->cal_timeout should be reinit by state_delay 926 * function then to start in the next 5 minutes. 927 */ 928 if (time_is_before_jiffies(lp->cal_timeout)) { 929 lp->is_tx_from_off = true; 930 at86rf230_async_state_change(lp, ctx, STATE_TRX_OFF, 931 at86rf230_xmit_start); 932 } else { 933 lp->is_tx_from_off = false; 934 at86rf230_xmit_start(ctx); 935 } 936 937 return 0; 938 } 939 940 static int 941 at86rf230_ed(struct ieee802154_hw *hw, u8 *level) 942 { 943 WARN_ON(!level); 944 *level = 0xbe; 945 return 0; 946 } 947 948 static int 949 at86rf230_start(struct ieee802154_hw *hw) 950 { 951 struct at86rf230_local *lp = hw->priv; 952 953 /* reset trac stats on start */ 954 if (IS_ENABLED(CONFIG_IEEE802154_AT86RF230_DEBUGFS)) 955 memset(&lp->trac, 0, sizeof(struct at86rf230_trac)); 956 957 at86rf230_awake(lp); 958 enable_irq(lp->spi->irq); 959 960 return at86rf230_sync_state_change(lp, STATE_RX_AACK_ON); 961 } 962 963 static void 964 at86rf230_stop(struct ieee802154_hw *hw) 965 { 966 struct at86rf230_local *lp = hw->priv; 967 u8 csma_seed[2]; 968 969 at86rf230_sync_state_change(lp, STATE_FORCE_TRX_OFF); 970 971 disable_irq(lp->spi->irq); 972 973 /* It's recommended to set random new csma_seeds before sleep state. 974 * Makes only sense in the stop callback, not doing this inside of 975 * at86rf230_sleep, this is also used when we don't transmit afterwards 976 * when calling start callback again. 977 */ 978 get_random_bytes(csma_seed, ARRAY_SIZE(csma_seed)); 979 at86rf230_write_subreg(lp, SR_CSMA_SEED_0, csma_seed[0]); 980 at86rf230_write_subreg(lp, SR_CSMA_SEED_1, csma_seed[1]); 981 982 at86rf230_sleep(lp); 983 } 984 985 static int 986 at86rf23x_set_channel(struct at86rf230_local *lp, u8 page, u8 channel) 987 { 988 return at86rf230_write_subreg(lp, SR_CHANNEL, channel); 989 } 990 991 #define AT86RF2XX_MAX_ED_LEVELS 0xF 992 static const s32 at86rf233_ed_levels[AT86RF2XX_MAX_ED_LEVELS + 1] = { 993 -9400, -9200, -9000, -8800, -8600, -8400, -8200, -8000, -7800, -7600, 994 -7400, -7200, -7000, -6800, -6600, -6400, 995 }; 996 997 static const s32 at86rf231_ed_levels[AT86RF2XX_MAX_ED_LEVELS + 1] = { 998 -9100, -8900, -8700, -8500, -8300, -8100, -7900, -7700, -7500, -7300, 999 -7100, -6900, -6700, -6500, -6300, -6100, 1000 }; 1001 1002 static const s32 at86rf212_ed_levels_100[AT86RF2XX_MAX_ED_LEVELS + 1] = { 1003 -10000, -9800, -9600, -9400, -9200, -9000, -8800, -8600, -8400, -8200, 1004 -8000, -7800, -7600, -7400, -7200, -7000, 1005 }; 1006 1007 static const s32 at86rf212_ed_levels_98[AT86RF2XX_MAX_ED_LEVELS + 1] = { 1008 -9800, -9600, -9400, -9200, -9000, -8800, -8600, -8400, -8200, -8000, 1009 -7800, -7600, -7400, -7200, -7000, -6800, 1010 }; 1011 1012 static inline int 1013 at86rf212_update_cca_ed_level(struct at86rf230_local *lp, int rssi_base_val) 1014 { 1015 unsigned int cca_ed_thres; 1016 int rc; 1017 1018 rc = at86rf230_read_subreg(lp, SR_CCA_ED_THRES, &cca_ed_thres); 1019 if (rc < 0) 1020 return rc; 1021 1022 switch (rssi_base_val) { 1023 case -98: 1024 lp->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_98; 1025 lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_98); 1026 lp->hw->phy->cca_ed_level = at86rf212_ed_levels_98[cca_ed_thres]; 1027 break; 1028 case -100: 1029 lp->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_100; 1030 lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_100); 1031 lp->hw->phy->cca_ed_level = at86rf212_ed_levels_100[cca_ed_thres]; 1032 break; 1033 default: 1034 WARN_ON(1); 1035 } 1036 1037 return 0; 1038 } 1039 1040 static int 1041 at86rf212_set_channel(struct at86rf230_local *lp, u8 page, u8 channel) 1042 { 1043 int rc; 1044 1045 if (channel == 0) 1046 rc = at86rf230_write_subreg(lp, SR_SUB_MODE, 0); 1047 else 1048 rc = at86rf230_write_subreg(lp, SR_SUB_MODE, 1); 1049 if (rc < 0) 1050 return rc; 1051 1052 if (page == 0) { 1053 rc = at86rf230_write_subreg(lp, SR_BPSK_QPSK, 0); 1054 lp->data->rssi_base_val = -100; 1055 } else { 1056 rc = at86rf230_write_subreg(lp, SR_BPSK_QPSK, 1); 1057 lp->data->rssi_base_val = -98; 1058 } 1059 if (rc < 0) 1060 return rc; 1061 1062 rc = at86rf212_update_cca_ed_level(lp, lp->data->rssi_base_val); 1063 if (rc < 0) 1064 return rc; 1065 1066 /* This sets the symbol_duration according frequency on the 212. 1067 * TODO move this handling while set channel and page in cfg802154. 1068 * We can do that, this timings are according 802.15.4 standard. 1069 * If we do that in cfg802154, this is a more generic calculation. 1070 * 1071 * This should also protected from ifs_timer. Means cancel timer and 1072 * init with a new value. For now, this is okay. 1073 */ 1074 if (channel == 0) { 1075 if (page == 0) { 1076 /* SUB:0 and BPSK:0 -> BPSK-20 */ 1077 lp->hw->phy->symbol_duration = 50; 1078 } else { 1079 /* SUB:1 and BPSK:0 -> BPSK-40 */ 1080 lp->hw->phy->symbol_duration = 25; 1081 } 1082 } else { 1083 if (page == 0) 1084 /* SUB:0 and BPSK:1 -> OQPSK-100/200/400 */ 1085 lp->hw->phy->symbol_duration = 40; 1086 else 1087 /* SUB:1 and BPSK:1 -> OQPSK-250/500/1000 */ 1088 lp->hw->phy->symbol_duration = 16; 1089 } 1090 1091 lp->hw->phy->lifs_period = IEEE802154_LIFS_PERIOD * 1092 lp->hw->phy->symbol_duration; 1093 lp->hw->phy->sifs_period = IEEE802154_SIFS_PERIOD * 1094 lp->hw->phy->symbol_duration; 1095 1096 return at86rf230_write_subreg(lp, SR_CHANNEL, channel); 1097 } 1098 1099 static int 1100 at86rf230_channel(struct ieee802154_hw *hw, u8 page, u8 channel) 1101 { 1102 struct at86rf230_local *lp = hw->priv; 1103 int rc; 1104 1105 rc = lp->data->set_channel(lp, page, channel); 1106 /* Wait for PLL */ 1107 usleep_range(lp->data->t_channel_switch, 1108 lp->data->t_channel_switch + 10); 1109 1110 lp->cal_timeout = jiffies + AT86RF2XX_CAL_LOOP_TIMEOUT; 1111 return rc; 1112 } 1113 1114 static int 1115 at86rf230_set_hw_addr_filt(struct ieee802154_hw *hw, 1116 struct ieee802154_hw_addr_filt *filt, 1117 unsigned long changed) 1118 { 1119 struct at86rf230_local *lp = hw->priv; 1120 1121 if (changed & IEEE802154_AFILT_SADDR_CHANGED) { 1122 u16 addr = le16_to_cpu(filt->short_addr); 1123 1124 dev_vdbg(&lp->spi->dev, "%s called for saddr\n", __func__); 1125 __at86rf230_write(lp, RG_SHORT_ADDR_0, addr); 1126 __at86rf230_write(lp, RG_SHORT_ADDR_1, addr >> 8); 1127 } 1128 1129 if (changed & IEEE802154_AFILT_PANID_CHANGED) { 1130 u16 pan = le16_to_cpu(filt->pan_id); 1131 1132 dev_vdbg(&lp->spi->dev, "%s called for pan id\n", __func__); 1133 __at86rf230_write(lp, RG_PAN_ID_0, pan); 1134 __at86rf230_write(lp, RG_PAN_ID_1, pan >> 8); 1135 } 1136 1137 if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) { 1138 u8 i, addr[8]; 1139 1140 memcpy(addr, &filt->ieee_addr, 8); 1141 dev_vdbg(&lp->spi->dev, "%s called for IEEE addr\n", __func__); 1142 for (i = 0; i < 8; i++) 1143 __at86rf230_write(lp, RG_IEEE_ADDR_0 + i, addr[i]); 1144 } 1145 1146 if (changed & IEEE802154_AFILT_PANC_CHANGED) { 1147 dev_vdbg(&lp->spi->dev, "%s called for panc change\n", __func__); 1148 if (filt->pan_coord) 1149 at86rf230_write_subreg(lp, SR_AACK_I_AM_COORD, 1); 1150 else 1151 at86rf230_write_subreg(lp, SR_AACK_I_AM_COORD, 0); 1152 } 1153 1154 return 0; 1155 } 1156 1157 #define AT86RF23X_MAX_TX_POWERS 0xF 1158 static const s32 at86rf233_powers[AT86RF23X_MAX_TX_POWERS + 1] = { 1159 400, 370, 340, 300, 250, 200, 100, 0, -100, -200, -300, -400, -600, 1160 -800, -1200, -1700, 1161 }; 1162 1163 static const s32 at86rf231_powers[AT86RF23X_MAX_TX_POWERS + 1] = { 1164 300, 280, 230, 180, 130, 70, 0, -100, -200, -300, -400, -500, -700, 1165 -900, -1200, -1700, 1166 }; 1167 1168 #define AT86RF212_MAX_TX_POWERS 0x1F 1169 static const s32 at86rf212_powers[AT86RF212_MAX_TX_POWERS + 1] = { 1170 500, 400, 300, 200, 100, 0, -100, -200, -300, -400, -500, -600, -700, 1171 -800, -900, -1000, -1100, -1200, -1300, -1400, -1500, -1600, -1700, 1172 -1800, -1900, -2000, -2100, -2200, -2300, -2400, -2500, -2600, 1173 }; 1174 1175 static int 1176 at86rf23x_set_txpower(struct at86rf230_local *lp, s32 mbm) 1177 { 1178 u32 i; 1179 1180 for (i = 0; i < lp->hw->phy->supported.tx_powers_size; i++) { 1181 if (lp->hw->phy->supported.tx_powers[i] == mbm) 1182 return at86rf230_write_subreg(lp, SR_TX_PWR_23X, i); 1183 } 1184 1185 return -EINVAL; 1186 } 1187 1188 static int 1189 at86rf212_set_txpower(struct at86rf230_local *lp, s32 mbm) 1190 { 1191 u32 i; 1192 1193 for (i = 0; i < lp->hw->phy->supported.tx_powers_size; i++) { 1194 if (lp->hw->phy->supported.tx_powers[i] == mbm) 1195 return at86rf230_write_subreg(lp, SR_TX_PWR_212, i); 1196 } 1197 1198 return -EINVAL; 1199 } 1200 1201 static int 1202 at86rf230_set_txpower(struct ieee802154_hw *hw, s32 mbm) 1203 { 1204 struct at86rf230_local *lp = hw->priv; 1205 1206 return lp->data->set_txpower(lp, mbm); 1207 } 1208 1209 static int 1210 at86rf230_set_lbt(struct ieee802154_hw *hw, bool on) 1211 { 1212 struct at86rf230_local *lp = hw->priv; 1213 1214 return at86rf230_write_subreg(lp, SR_CSMA_LBT_MODE, on); 1215 } 1216 1217 static int 1218 at86rf230_set_cca_mode(struct ieee802154_hw *hw, 1219 const struct wpan_phy_cca *cca) 1220 { 1221 struct at86rf230_local *lp = hw->priv; 1222 u8 val; 1223 1224 /* mapping 802.15.4 to driver spec */ 1225 switch (cca->mode) { 1226 case NL802154_CCA_ENERGY: 1227 val = 1; 1228 break; 1229 case NL802154_CCA_CARRIER: 1230 val = 2; 1231 break; 1232 case NL802154_CCA_ENERGY_CARRIER: 1233 switch (cca->opt) { 1234 case NL802154_CCA_OPT_ENERGY_CARRIER_AND: 1235 val = 3; 1236 break; 1237 case NL802154_CCA_OPT_ENERGY_CARRIER_OR: 1238 val = 0; 1239 break; 1240 default: 1241 return -EINVAL; 1242 } 1243 break; 1244 default: 1245 return -EINVAL; 1246 } 1247 1248 return at86rf230_write_subreg(lp, SR_CCA_MODE, val); 1249 } 1250 1251 static int 1252 at86rf230_set_cca_ed_level(struct ieee802154_hw *hw, s32 mbm) 1253 { 1254 struct at86rf230_local *lp = hw->priv; 1255 u32 i; 1256 1257 for (i = 0; i < hw->phy->supported.cca_ed_levels_size; i++) { 1258 if (hw->phy->supported.cca_ed_levels[i] == mbm) 1259 return at86rf230_write_subreg(lp, SR_CCA_ED_THRES, i); 1260 } 1261 1262 return -EINVAL; 1263 } 1264 1265 static int 1266 at86rf230_set_csma_params(struct ieee802154_hw *hw, u8 min_be, u8 max_be, 1267 u8 retries) 1268 { 1269 struct at86rf230_local *lp = hw->priv; 1270 int rc; 1271 1272 rc = at86rf230_write_subreg(lp, SR_MIN_BE, min_be); 1273 if (rc) 1274 return rc; 1275 1276 rc = at86rf230_write_subreg(lp, SR_MAX_BE, max_be); 1277 if (rc) 1278 return rc; 1279 1280 return at86rf230_write_subreg(lp, SR_MAX_CSMA_RETRIES, retries); 1281 } 1282 1283 static int 1284 at86rf230_set_frame_retries(struct ieee802154_hw *hw, s8 retries) 1285 { 1286 struct at86rf230_local *lp = hw->priv; 1287 1288 return at86rf230_write_subreg(lp, SR_MAX_FRAME_RETRIES, retries); 1289 } 1290 1291 static int 1292 at86rf230_set_promiscuous_mode(struct ieee802154_hw *hw, const bool on) 1293 { 1294 struct at86rf230_local *lp = hw->priv; 1295 int rc; 1296 1297 if (on) { 1298 rc = at86rf230_write_subreg(lp, SR_AACK_DIS_ACK, 1); 1299 if (rc < 0) 1300 return rc; 1301 1302 rc = at86rf230_write_subreg(lp, SR_AACK_PROM_MODE, 1); 1303 if (rc < 0) 1304 return rc; 1305 } else { 1306 rc = at86rf230_write_subreg(lp, SR_AACK_PROM_MODE, 0); 1307 if (rc < 0) 1308 return rc; 1309 1310 rc = at86rf230_write_subreg(lp, SR_AACK_DIS_ACK, 0); 1311 if (rc < 0) 1312 return rc; 1313 } 1314 1315 return 0; 1316 } 1317 1318 static const struct ieee802154_ops at86rf230_ops = { 1319 .owner = THIS_MODULE, 1320 .xmit_async = at86rf230_xmit, 1321 .ed = at86rf230_ed, 1322 .set_channel = at86rf230_channel, 1323 .start = at86rf230_start, 1324 .stop = at86rf230_stop, 1325 .set_hw_addr_filt = at86rf230_set_hw_addr_filt, 1326 .set_txpower = at86rf230_set_txpower, 1327 .set_lbt = at86rf230_set_lbt, 1328 .set_cca_mode = at86rf230_set_cca_mode, 1329 .set_cca_ed_level = at86rf230_set_cca_ed_level, 1330 .set_csma_params = at86rf230_set_csma_params, 1331 .set_frame_retries = at86rf230_set_frame_retries, 1332 .set_promiscuous_mode = at86rf230_set_promiscuous_mode, 1333 }; 1334 1335 static struct at86rf2xx_chip_data at86rf233_data = { 1336 .t_sleep_cycle = 330, 1337 .t_channel_switch = 11, 1338 .t_reset_to_off = 26, 1339 .t_off_to_aack = 80, 1340 .t_off_to_tx_on = 80, 1341 .t_off_to_sleep = 35, 1342 .t_sleep_to_off = 1000, 1343 .t_frame = 4096, 1344 .t_p_ack = 545, 1345 .rssi_base_val = -94, 1346 .set_channel = at86rf23x_set_channel, 1347 .set_txpower = at86rf23x_set_txpower, 1348 }; 1349 1350 static struct at86rf2xx_chip_data at86rf231_data = { 1351 .t_sleep_cycle = 330, 1352 .t_channel_switch = 24, 1353 .t_reset_to_off = 37, 1354 .t_off_to_aack = 110, 1355 .t_off_to_tx_on = 110, 1356 .t_off_to_sleep = 35, 1357 .t_sleep_to_off = 1000, 1358 .t_frame = 4096, 1359 .t_p_ack = 545, 1360 .rssi_base_val = -91, 1361 .set_channel = at86rf23x_set_channel, 1362 .set_txpower = at86rf23x_set_txpower, 1363 }; 1364 1365 static struct at86rf2xx_chip_data at86rf212_data = { 1366 .t_sleep_cycle = 330, 1367 .t_channel_switch = 11, 1368 .t_reset_to_off = 26, 1369 .t_off_to_aack = 200, 1370 .t_off_to_tx_on = 200, 1371 .t_off_to_sleep = 35, 1372 .t_sleep_to_off = 1000, 1373 .t_frame = 4096, 1374 .t_p_ack = 545, 1375 .rssi_base_val = -100, 1376 .set_channel = at86rf212_set_channel, 1377 .set_txpower = at86rf212_set_txpower, 1378 }; 1379 1380 static int at86rf230_hw_init(struct at86rf230_local *lp, u8 xtal_trim) 1381 { 1382 int rc, irq_type, irq_pol = IRQ_ACTIVE_HIGH; 1383 unsigned int dvdd; 1384 u8 csma_seed[2]; 1385 1386 rc = at86rf230_sync_state_change(lp, STATE_FORCE_TRX_OFF); 1387 if (rc) 1388 return rc; 1389 1390 irq_type = irq_get_trigger_type(lp->spi->irq); 1391 if (irq_type == IRQ_TYPE_EDGE_FALLING || 1392 irq_type == IRQ_TYPE_LEVEL_LOW) 1393 irq_pol = IRQ_ACTIVE_LOW; 1394 1395 rc = at86rf230_write_subreg(lp, SR_IRQ_POLARITY, irq_pol); 1396 if (rc) 1397 return rc; 1398 1399 rc = at86rf230_write_subreg(lp, SR_RX_SAFE_MODE, 1); 1400 if (rc) 1401 return rc; 1402 1403 rc = at86rf230_write_subreg(lp, SR_IRQ_MASK, IRQ_TRX_END); 1404 if (rc) 1405 return rc; 1406 1407 /* reset values differs in at86rf231 and at86rf233 */ 1408 rc = at86rf230_write_subreg(lp, SR_IRQ_MASK_MODE, 0); 1409 if (rc) 1410 return rc; 1411 1412 get_random_bytes(csma_seed, ARRAY_SIZE(csma_seed)); 1413 rc = at86rf230_write_subreg(lp, SR_CSMA_SEED_0, csma_seed[0]); 1414 if (rc) 1415 return rc; 1416 rc = at86rf230_write_subreg(lp, SR_CSMA_SEED_1, csma_seed[1]); 1417 if (rc) 1418 return rc; 1419 1420 /* CLKM changes are applied immediately */ 1421 rc = at86rf230_write_subreg(lp, SR_CLKM_SHA_SEL, 0x00); 1422 if (rc) 1423 return rc; 1424 1425 /* Turn CLKM Off */ 1426 rc = at86rf230_write_subreg(lp, SR_CLKM_CTRL, 0x00); 1427 if (rc) 1428 return rc; 1429 /* Wait the next SLEEP cycle */ 1430 usleep_range(lp->data->t_sleep_cycle, 1431 lp->data->t_sleep_cycle + 100); 1432 1433 /* xtal_trim value is calculated by: 1434 * CL = 0.5 * (CX + CTRIM + CPAR) 1435 * 1436 * whereas: 1437 * CL = capacitor of used crystal 1438 * CX = connected capacitors at xtal pins 1439 * CPAR = in all at86rf2xx datasheets this is a constant value 3 pF, 1440 * but this is different on each board setup. You need to fine 1441 * tuning this value via CTRIM. 1442 * CTRIM = variable capacitor setting. Resolution is 0.3 pF range is 1443 * 0 pF upto 4.5 pF. 1444 * 1445 * Examples: 1446 * atben transceiver: 1447 * 1448 * CL = 8 pF 1449 * CX = 12 pF 1450 * CPAR = 3 pF (We assume the magic constant from datasheet) 1451 * CTRIM = 0.9 pF 1452 * 1453 * (12+0.9+3)/2 = 7.95 which is nearly at 8 pF 1454 * 1455 * xtal_trim = 0x3 1456 * 1457 * openlabs transceiver: 1458 * 1459 * CL = 16 pF 1460 * CX = 22 pF 1461 * CPAR = 3 pF (We assume the magic constant from datasheet) 1462 * CTRIM = 4.5 pF 1463 * 1464 * (22+4.5+3)/2 = 14.75 which is the nearest value to 16 pF 1465 * 1466 * xtal_trim = 0xf 1467 */ 1468 rc = at86rf230_write_subreg(lp, SR_XTAL_TRIM, xtal_trim); 1469 if (rc) 1470 return rc; 1471 1472 rc = at86rf230_read_subreg(lp, SR_DVDD_OK, &dvdd); 1473 if (rc) 1474 return rc; 1475 if (!dvdd) { 1476 dev_err(&lp->spi->dev, "DVDD error\n"); 1477 return -EINVAL; 1478 } 1479 1480 /* Force setting slotted operation bit to 0. Sometimes the atben 1481 * sets this bit and I don't know why. We set this always force 1482 * to zero while probing. 1483 */ 1484 return at86rf230_write_subreg(lp, SR_SLOTTED_OPERATION, 0); 1485 } 1486 1487 static int 1488 at86rf230_get_pdata(struct spi_device *spi, int *rstn, int *slp_tr, 1489 u8 *xtal_trim) 1490 { 1491 struct at86rf230_platform_data *pdata = spi->dev.platform_data; 1492 int ret; 1493 1494 if (!IS_ENABLED(CONFIG_OF) || !spi->dev.of_node) { 1495 if (!pdata) 1496 return -ENOENT; 1497 1498 *rstn = pdata->rstn; 1499 *slp_tr = pdata->slp_tr; 1500 *xtal_trim = pdata->xtal_trim; 1501 return 0; 1502 } 1503 1504 *rstn = of_get_named_gpio(spi->dev.of_node, "reset-gpio", 0); 1505 *slp_tr = of_get_named_gpio(spi->dev.of_node, "sleep-gpio", 0); 1506 ret = of_property_read_u8(spi->dev.of_node, "xtal-trim", xtal_trim); 1507 if (ret < 0 && ret != -EINVAL) 1508 return ret; 1509 1510 return 0; 1511 } 1512 1513 static int 1514 at86rf230_detect_device(struct at86rf230_local *lp) 1515 { 1516 unsigned int part, version, val; 1517 u16 man_id = 0; 1518 const char *chip; 1519 int rc; 1520 1521 rc = __at86rf230_read(lp, RG_MAN_ID_0, &val); 1522 if (rc) 1523 return rc; 1524 man_id |= val; 1525 1526 rc = __at86rf230_read(lp, RG_MAN_ID_1, &val); 1527 if (rc) 1528 return rc; 1529 man_id |= (val << 8); 1530 1531 rc = __at86rf230_read(lp, RG_PART_NUM, &part); 1532 if (rc) 1533 return rc; 1534 1535 rc = __at86rf230_read(lp, RG_VERSION_NUM, &version); 1536 if (rc) 1537 return rc; 1538 1539 if (man_id != 0x001f) { 1540 dev_err(&lp->spi->dev, "Non-Atmel dev found (MAN_ID %02x %02x)\n", 1541 man_id >> 8, man_id & 0xFF); 1542 return -EINVAL; 1543 } 1544 1545 lp->hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | 1546 IEEE802154_HW_CSMA_PARAMS | 1547 IEEE802154_HW_FRAME_RETRIES | IEEE802154_HW_AFILT | 1548 IEEE802154_HW_PROMISCUOUS; 1549 1550 lp->hw->phy->flags = WPAN_PHY_FLAG_TXPOWER | 1551 WPAN_PHY_FLAG_CCA_ED_LEVEL | 1552 WPAN_PHY_FLAG_CCA_MODE; 1553 1554 lp->hw->phy->supported.cca_modes = BIT(NL802154_CCA_ENERGY) | 1555 BIT(NL802154_CCA_CARRIER) | BIT(NL802154_CCA_ENERGY_CARRIER); 1556 lp->hw->phy->supported.cca_opts = BIT(NL802154_CCA_OPT_ENERGY_CARRIER_AND) | 1557 BIT(NL802154_CCA_OPT_ENERGY_CARRIER_OR); 1558 1559 lp->hw->phy->cca.mode = NL802154_CCA_ENERGY; 1560 1561 switch (part) { 1562 case 2: 1563 chip = "at86rf230"; 1564 rc = -ENOTSUPP; 1565 goto not_supp; 1566 case 3: 1567 chip = "at86rf231"; 1568 lp->data = &at86rf231_data; 1569 lp->hw->phy->supported.channels[0] = 0x7FFF800; 1570 lp->hw->phy->current_channel = 11; 1571 lp->hw->phy->symbol_duration = 16; 1572 lp->hw->phy->supported.tx_powers = at86rf231_powers; 1573 lp->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf231_powers); 1574 lp->hw->phy->supported.cca_ed_levels = at86rf231_ed_levels; 1575 lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf231_ed_levels); 1576 break; 1577 case 7: 1578 chip = "at86rf212"; 1579 lp->data = &at86rf212_data; 1580 lp->hw->flags |= IEEE802154_HW_LBT; 1581 lp->hw->phy->supported.channels[0] = 0x00007FF; 1582 lp->hw->phy->supported.channels[2] = 0x00007FF; 1583 lp->hw->phy->current_channel = 5; 1584 lp->hw->phy->symbol_duration = 25; 1585 lp->hw->phy->supported.lbt = NL802154_SUPPORTED_BOOL_BOTH; 1586 lp->hw->phy->supported.tx_powers = at86rf212_powers; 1587 lp->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf212_powers); 1588 lp->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_100; 1589 lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_100); 1590 break; 1591 case 11: 1592 chip = "at86rf233"; 1593 lp->data = &at86rf233_data; 1594 lp->hw->phy->supported.channels[0] = 0x7FFF800; 1595 lp->hw->phy->current_channel = 13; 1596 lp->hw->phy->symbol_duration = 16; 1597 lp->hw->phy->supported.tx_powers = at86rf233_powers; 1598 lp->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf233_powers); 1599 lp->hw->phy->supported.cca_ed_levels = at86rf233_ed_levels; 1600 lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf233_ed_levels); 1601 break; 1602 default: 1603 chip = "unknown"; 1604 rc = -ENOTSUPP; 1605 goto not_supp; 1606 } 1607 1608 lp->hw->phy->cca_ed_level = lp->hw->phy->supported.cca_ed_levels[7]; 1609 lp->hw->phy->transmit_power = lp->hw->phy->supported.tx_powers[0]; 1610 1611 not_supp: 1612 dev_info(&lp->spi->dev, "Detected %s chip version %d\n", chip, version); 1613 1614 return rc; 1615 } 1616 1617 #ifdef CONFIG_IEEE802154_AT86RF230_DEBUGFS 1618 static struct dentry *at86rf230_debugfs_root; 1619 1620 static int at86rf230_stats_show(struct seq_file *file, void *offset) 1621 { 1622 struct at86rf230_local *lp = file->private; 1623 1624 seq_printf(file, "SUCCESS:\t\t%8llu\n", lp->trac.success); 1625 seq_printf(file, "SUCCESS_DATA_PENDING:\t%8llu\n", 1626 lp->trac.success_data_pending); 1627 seq_printf(file, "SUCCESS_WAIT_FOR_ACK:\t%8llu\n", 1628 lp->trac.success_wait_for_ack); 1629 seq_printf(file, "CHANNEL_ACCESS_FAILURE:\t%8llu\n", 1630 lp->trac.channel_access_failure); 1631 seq_printf(file, "NO_ACK:\t\t\t%8llu\n", lp->trac.no_ack); 1632 seq_printf(file, "INVALID:\t\t%8llu\n", lp->trac.invalid); 1633 return 0; 1634 } 1635 1636 static int at86rf230_stats_open(struct inode *inode, struct file *file) 1637 { 1638 return single_open(file, at86rf230_stats_show, inode->i_private); 1639 } 1640 1641 static const struct file_operations at86rf230_stats_fops = { 1642 .open = at86rf230_stats_open, 1643 .read = seq_read, 1644 .llseek = seq_lseek, 1645 .release = single_release, 1646 }; 1647 1648 static int at86rf230_debugfs_init(struct at86rf230_local *lp) 1649 { 1650 char debugfs_dir_name[DNAME_INLINE_LEN + 1] = "at86rf230-"; 1651 struct dentry *stats; 1652 1653 strncat(debugfs_dir_name, dev_name(&lp->spi->dev), DNAME_INLINE_LEN); 1654 1655 at86rf230_debugfs_root = debugfs_create_dir(debugfs_dir_name, NULL); 1656 if (!at86rf230_debugfs_root) 1657 return -ENOMEM; 1658 1659 stats = debugfs_create_file("trac_stats", 0444, 1660 at86rf230_debugfs_root, lp, 1661 &at86rf230_stats_fops); 1662 if (!stats) 1663 return -ENOMEM; 1664 1665 return 0; 1666 } 1667 1668 static void at86rf230_debugfs_remove(void) 1669 { 1670 debugfs_remove_recursive(at86rf230_debugfs_root); 1671 } 1672 #else 1673 static int at86rf230_debugfs_init(struct at86rf230_local *lp) { return 0; } 1674 static void at86rf230_debugfs_remove(void) { } 1675 #endif 1676 1677 static int at86rf230_probe(struct spi_device *spi) 1678 { 1679 struct ieee802154_hw *hw; 1680 struct at86rf230_local *lp; 1681 unsigned int status; 1682 int rc, irq_type, rstn, slp_tr; 1683 u8 xtal_trim = 0; 1684 1685 if (!spi->irq) { 1686 dev_err(&spi->dev, "no IRQ specified\n"); 1687 return -EINVAL; 1688 } 1689 1690 rc = at86rf230_get_pdata(spi, &rstn, &slp_tr, &xtal_trim); 1691 if (rc < 0) { 1692 dev_err(&spi->dev, "failed to parse platform_data: %d\n", rc); 1693 return rc; 1694 } 1695 1696 if (gpio_is_valid(rstn)) { 1697 rc = devm_gpio_request_one(&spi->dev, rstn, 1698 GPIOF_OUT_INIT_HIGH, "rstn"); 1699 if (rc) 1700 return rc; 1701 } 1702 1703 if (gpio_is_valid(slp_tr)) { 1704 rc = devm_gpio_request_one(&spi->dev, slp_tr, 1705 GPIOF_OUT_INIT_LOW, "slp_tr"); 1706 if (rc) 1707 return rc; 1708 } 1709 1710 /* Reset */ 1711 if (gpio_is_valid(rstn)) { 1712 udelay(1); 1713 gpio_set_value_cansleep(rstn, 0); 1714 udelay(1); 1715 gpio_set_value_cansleep(rstn, 1); 1716 usleep_range(120, 240); 1717 } 1718 1719 hw = ieee802154_alloc_hw(sizeof(*lp), &at86rf230_ops); 1720 if (!hw) 1721 return -ENOMEM; 1722 1723 lp = hw->priv; 1724 lp->hw = hw; 1725 lp->spi = spi; 1726 lp->slp_tr = slp_tr; 1727 hw->parent = &spi->dev; 1728 ieee802154_random_extended_addr(&hw->phy->perm_extended_addr); 1729 1730 lp->regmap = devm_regmap_init_spi(spi, &at86rf230_regmap_spi_config); 1731 if (IS_ERR(lp->regmap)) { 1732 rc = PTR_ERR(lp->regmap); 1733 dev_err(&spi->dev, "Failed to allocate register map: %d\n", 1734 rc); 1735 goto free_dev; 1736 } 1737 1738 at86rf230_setup_spi_messages(lp, &lp->state); 1739 at86rf230_setup_spi_messages(lp, &lp->tx); 1740 1741 rc = at86rf230_detect_device(lp); 1742 if (rc < 0) 1743 goto free_dev; 1744 1745 init_completion(&lp->state_complete); 1746 1747 spi_set_drvdata(spi, lp); 1748 1749 rc = at86rf230_hw_init(lp, xtal_trim); 1750 if (rc) 1751 goto free_dev; 1752 1753 /* Read irq status register to reset irq line */ 1754 rc = at86rf230_read_subreg(lp, RG_IRQ_STATUS, 0xff, 0, &status); 1755 if (rc) 1756 goto free_dev; 1757 1758 irq_type = irq_get_trigger_type(spi->irq); 1759 if (!irq_type) 1760 irq_type = IRQF_TRIGGER_HIGH; 1761 1762 rc = devm_request_irq(&spi->dev, spi->irq, at86rf230_isr, 1763 IRQF_SHARED | irq_type, dev_name(&spi->dev), lp); 1764 if (rc) 1765 goto free_dev; 1766 1767 /* disable_irq by default and wait for starting hardware */ 1768 disable_irq(spi->irq); 1769 1770 /* going into sleep by default */ 1771 at86rf230_sleep(lp); 1772 1773 rc = at86rf230_debugfs_init(lp); 1774 if (rc) 1775 goto free_dev; 1776 1777 rc = ieee802154_register_hw(lp->hw); 1778 if (rc) 1779 goto free_debugfs; 1780 1781 return rc; 1782 1783 free_debugfs: 1784 at86rf230_debugfs_remove(); 1785 free_dev: 1786 ieee802154_free_hw(lp->hw); 1787 1788 return rc; 1789 } 1790 1791 static int at86rf230_remove(struct spi_device *spi) 1792 { 1793 struct at86rf230_local *lp = spi_get_drvdata(spi); 1794 1795 /* mask all at86rf230 irq's */ 1796 at86rf230_write_subreg(lp, SR_IRQ_MASK, 0); 1797 ieee802154_unregister_hw(lp->hw); 1798 ieee802154_free_hw(lp->hw); 1799 at86rf230_debugfs_remove(); 1800 dev_dbg(&spi->dev, "unregistered at86rf230\n"); 1801 1802 return 0; 1803 } 1804 1805 static const struct of_device_id at86rf230_of_match[] = { 1806 { .compatible = "atmel,at86rf230", }, 1807 { .compatible = "atmel,at86rf231", }, 1808 { .compatible = "atmel,at86rf233", }, 1809 { .compatible = "atmel,at86rf212", }, 1810 { }, 1811 }; 1812 MODULE_DEVICE_TABLE(of, at86rf230_of_match); 1813 1814 static const struct spi_device_id at86rf230_device_id[] = { 1815 { .name = "at86rf230", }, 1816 { .name = "at86rf231", }, 1817 { .name = "at86rf233", }, 1818 { .name = "at86rf212", }, 1819 { }, 1820 }; 1821 MODULE_DEVICE_TABLE(spi, at86rf230_device_id); 1822 1823 static struct spi_driver at86rf230_driver = { 1824 .id_table = at86rf230_device_id, 1825 .driver = { 1826 .of_match_table = of_match_ptr(at86rf230_of_match), 1827 .name = "at86rf230", 1828 }, 1829 .probe = at86rf230_probe, 1830 .remove = at86rf230_remove, 1831 }; 1832 1833 module_spi_driver(at86rf230_driver); 1834 1835 MODULE_DESCRIPTION("AT86RF230 Transceiver Driver"); 1836 MODULE_LICENSE("GPL v2"); 1837