1 /*****************************************************************************/ 2 3 /* 4 * baycom_epp.c -- baycom epp radio modem driver. 5 * 6 * Copyright (C) 1998-2000 7 * Thomas Sailer (sailer@ife.ee.ethz.ch) 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License as published by 11 * the Free Software Foundation; either version 2 of the License, or 12 * (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 22 * 23 * Please note that the GPL allows you to use the driver, NOT the radio. 24 * In order to use the radio, you need a license from the communications 25 * authority of your country. 26 * 27 * 28 * History: 29 * 0.1 xx.xx.1998 Initial version by Matthias Welwarsky (dg2fef) 30 * 0.2 21.04.1998 Massive rework by Thomas Sailer 31 * Integrated FPGA EPP modem configuration routines 32 * 0.3 11.05.1998 Took FPGA config out and moved it into a separate program 33 * 0.4 26.07.1999 Adapted to new lowlevel parport driver interface 34 * 0.5 03.08.1999 adapt to Linus' new __setup/__initcall 35 * removed some pre-2.2 kernel compatibility cruft 36 * 0.6 10.08.1999 Check if parport can do SPP and is safe to access during interrupt contexts 37 * 0.7 12.02.2000 adapted to softnet driver interface 38 * 39 */ 40 41 /*****************************************************************************/ 42 43 #include <linux/crc-ccitt.h> 44 #include <linux/module.h> 45 #include <linux/kernel.h> 46 #include <linux/init.h> 47 #include <linux/sched.h> 48 #include <linux/string.h> 49 #include <linux/workqueue.h> 50 #include <linux/fs.h> 51 #include <linux/parport.h> 52 #include <linux/if_arp.h> 53 #include <linux/hdlcdrv.h> 54 #include <linux/baycom.h> 55 #include <linux/jiffies.h> 56 #include <linux/random.h> 57 #include <net/ax25.h> 58 #include <linux/uaccess.h> 59 60 /* --------------------------------------------------------------------- */ 61 62 #define BAYCOM_DEBUG 63 #define BAYCOM_MAGIC 19730510 64 65 /* --------------------------------------------------------------------- */ 66 67 static const char paranoia_str[] = KERN_ERR 68 "baycom_epp: bad magic number for hdlcdrv_state struct in routine %s\n"; 69 70 static const char bc_drvname[] = "baycom_epp"; 71 static const char bc_drvinfo[] = KERN_INFO "baycom_epp: (C) 1998-2000 Thomas Sailer, HB9JNX/AE4WA\n" 72 "baycom_epp: version 0.7\n"; 73 74 /* --------------------------------------------------------------------- */ 75 76 #define NR_PORTS 4 77 78 static struct net_device *baycom_device[NR_PORTS]; 79 80 /* --------------------------------------------------------------------- */ 81 82 /* EPP status register */ 83 #define EPP_DCDBIT 0x80 84 #define EPP_PTTBIT 0x08 85 #define EPP_NREF 0x01 86 #define EPP_NRAEF 0x02 87 #define EPP_NRHF 0x04 88 #define EPP_NTHF 0x20 89 #define EPP_NTAEF 0x10 90 #define EPP_NTEF EPP_PTTBIT 91 92 /* EPP control register */ 93 #define EPP_TX_FIFO_ENABLE 0x10 94 #define EPP_RX_FIFO_ENABLE 0x08 95 #define EPP_MODEM_ENABLE 0x20 96 #define EPP_LEDS 0xC0 97 #define EPP_IRQ_ENABLE 0x10 98 99 /* LPT registers */ 100 #define LPTREG_ECONTROL 0x402 101 #define LPTREG_CONFIGB 0x401 102 #define LPTREG_CONFIGA 0x400 103 #define LPTREG_EPPDATA 0x004 104 #define LPTREG_EPPADDR 0x003 105 #define LPTREG_CONTROL 0x002 106 #define LPTREG_STATUS 0x001 107 #define LPTREG_DATA 0x000 108 109 /* LPT control register */ 110 #define LPTCTRL_PROGRAM 0x04 /* 0 to reprogram */ 111 #define LPTCTRL_WRITE 0x01 112 #define LPTCTRL_ADDRSTB 0x08 113 #define LPTCTRL_DATASTB 0x02 114 #define LPTCTRL_INTEN 0x10 115 116 /* LPT status register */ 117 #define LPTSTAT_SHIFT_NINTR 6 118 #define LPTSTAT_WAIT 0x80 119 #define LPTSTAT_NINTR (1<<LPTSTAT_SHIFT_NINTR) 120 #define LPTSTAT_PE 0x20 121 #define LPTSTAT_DONE 0x10 122 #define LPTSTAT_NERROR 0x08 123 #define LPTSTAT_EPPTIMEOUT 0x01 124 125 /* LPT data register */ 126 #define LPTDATA_SHIFT_TDI 0 127 #define LPTDATA_SHIFT_TMS 2 128 #define LPTDATA_TDI (1<<LPTDATA_SHIFT_TDI) 129 #define LPTDATA_TCK 0x02 130 #define LPTDATA_TMS (1<<LPTDATA_SHIFT_TMS) 131 #define LPTDATA_INITBIAS 0x80 132 133 134 /* EPP modem config/status bits */ 135 #define EPP_DCDBIT 0x80 136 #define EPP_PTTBIT 0x08 137 #define EPP_RXEBIT 0x01 138 #define EPP_RXAEBIT 0x02 139 #define EPP_RXHFULL 0x04 140 141 #define EPP_NTHF 0x20 142 #define EPP_NTAEF 0x10 143 #define EPP_NTEF EPP_PTTBIT 144 145 #define EPP_TX_FIFO_ENABLE 0x10 146 #define EPP_RX_FIFO_ENABLE 0x08 147 #define EPP_MODEM_ENABLE 0x20 148 #define EPP_LEDS 0xC0 149 #define EPP_IRQ_ENABLE 0x10 150 151 /* Xilinx 4k JTAG instructions */ 152 #define XC4K_IRLENGTH 3 153 #define XC4K_EXTEST 0 154 #define XC4K_PRELOAD 1 155 #define XC4K_CONFIGURE 5 156 #define XC4K_BYPASS 7 157 158 #define EPP_CONVENTIONAL 0 159 #define EPP_FPGA 1 160 #define EPP_FPGAEXTSTATUS 2 161 162 #define TXBUFFER_SIZE ((HDLCDRV_MAXFLEN*6/5)+8) 163 164 /* ---------------------------------------------------------------------- */ 165 /* 166 * Information that need to be kept for each board. 167 */ 168 169 struct baycom_state { 170 int magic; 171 172 struct pardevice *pdev; 173 struct net_device *dev; 174 unsigned int work_running; 175 struct delayed_work run_work; 176 unsigned int modem; 177 unsigned int bitrate; 178 unsigned char stat; 179 180 struct { 181 unsigned int intclk; 182 unsigned int fclk; 183 unsigned int bps; 184 unsigned int extmodem; 185 unsigned int loopback; 186 } cfg; 187 188 struct hdlcdrv_channel_params ch_params; 189 190 struct { 191 unsigned int bitbuf, bitstream, numbits, state; 192 unsigned char *bufptr; 193 int bufcnt; 194 unsigned char buf[TXBUFFER_SIZE]; 195 } hdlcrx; 196 197 struct { 198 int calibrate; 199 int slotcnt; 200 int flags; 201 enum { tx_idle = 0, tx_keyup, tx_data, tx_tail } state; 202 unsigned char *bufptr; 203 int bufcnt; 204 unsigned char buf[TXBUFFER_SIZE]; 205 } hdlctx; 206 207 unsigned int ptt_keyed; 208 struct sk_buff *skb; /* next transmit packet */ 209 210 #ifdef BAYCOM_DEBUG 211 struct debug_vals { 212 unsigned long last_jiffies; 213 unsigned cur_intcnt; 214 unsigned last_intcnt; 215 int cur_pllcorr; 216 int last_pllcorr; 217 unsigned int mod_cycles; 218 unsigned int demod_cycles; 219 } debug_vals; 220 #endif /* BAYCOM_DEBUG */ 221 }; 222 223 /* --------------------------------------------------------------------- */ 224 225 #define KISS_VERBOSE 226 227 /* --------------------------------------------------------------------- */ 228 229 #define PARAM_TXDELAY 1 230 #define PARAM_PERSIST 2 231 #define PARAM_SLOTTIME 3 232 #define PARAM_TXTAIL 4 233 #define PARAM_FULLDUP 5 234 #define PARAM_HARDWARE 6 235 #define PARAM_RETURN 255 236 237 /* --------------------------------------------------------------------- */ 238 /* 239 * the CRC routines are stolen from WAMPES 240 * by Dieter Deyke 241 */ 242 243 244 /*---------------------------------------------------------------------------*/ 245 246 #if 0 247 static inline void append_crc_ccitt(unsigned char *buffer, int len) 248 { 249 unsigned int crc = 0xffff; 250 251 for (;len>0;len--) 252 crc = (crc >> 8) ^ crc_ccitt_table[(crc ^ *buffer++) & 0xff]; 253 crc ^= 0xffff; 254 *buffer++ = crc; 255 *buffer++ = crc >> 8; 256 } 257 #endif 258 259 /*---------------------------------------------------------------------------*/ 260 261 static inline int check_crc_ccitt(const unsigned char *buf, int cnt) 262 { 263 return (crc_ccitt(0xffff, buf, cnt) & 0xffff) == 0xf0b8; 264 } 265 266 /*---------------------------------------------------------------------------*/ 267 268 static inline int calc_crc_ccitt(const unsigned char *buf, int cnt) 269 { 270 return (crc_ccitt(0xffff, buf, cnt) ^ 0xffff) & 0xffff; 271 } 272 273 /* ---------------------------------------------------------------------- */ 274 275 #define tenms_to_flags(bc,tenms) ((tenms * bc->bitrate) / 800) 276 277 /* --------------------------------------------------------------------- */ 278 279 static inline void baycom_int_freq(struct baycom_state *bc) 280 { 281 #ifdef BAYCOM_DEBUG 282 unsigned long cur_jiffies = jiffies; 283 /* 284 * measure the interrupt frequency 285 */ 286 bc->debug_vals.cur_intcnt++; 287 if (time_after_eq(cur_jiffies, bc->debug_vals.last_jiffies + HZ)) { 288 bc->debug_vals.last_jiffies = cur_jiffies; 289 bc->debug_vals.last_intcnt = bc->debug_vals.cur_intcnt; 290 bc->debug_vals.cur_intcnt = 0; 291 bc->debug_vals.last_pllcorr = bc->debug_vals.cur_pllcorr; 292 bc->debug_vals.cur_pllcorr = 0; 293 } 294 #endif /* BAYCOM_DEBUG */ 295 } 296 297 /* ---------------------------------------------------------------------- */ 298 /* 299 * eppconfig_path should be setable via /proc/sys. 300 */ 301 302 static char const eppconfig_path[] = "/usr/sbin/eppfpga"; 303 304 static char *envp[] = { "HOME=/", "TERM=linux", "PATH=/usr/bin:/bin", NULL }; 305 306 /* eppconfig: called during ifconfig up to configure the modem */ 307 static int eppconfig(struct baycom_state *bc) 308 { 309 char modearg[256]; 310 char portarg[16]; 311 char *argv[] = { 312 (char *)eppconfig_path, 313 "-s", 314 "-p", portarg, 315 "-m", modearg, 316 NULL }; 317 318 /* set up arguments */ 319 sprintf(modearg, "%sclk,%smodem,fclk=%d,bps=%d,divider=%d%s,extstat", 320 bc->cfg.intclk ? "int" : "ext", 321 bc->cfg.extmodem ? "ext" : "int", bc->cfg.fclk, bc->cfg.bps, 322 (bc->cfg.fclk + 8 * bc->cfg.bps) / (16 * bc->cfg.bps), 323 bc->cfg.loopback ? ",loopback" : ""); 324 sprintf(portarg, "%ld", bc->pdev->port->base); 325 printk(KERN_DEBUG "%s: %s -s -p %s -m %s\n", bc_drvname, eppconfig_path, portarg, modearg); 326 327 return call_usermodehelper(eppconfig_path, argv, envp, UMH_WAIT_PROC); 328 } 329 330 /* ---------------------------------------------------------------------- */ 331 332 static inline void do_kiss_params(struct baycom_state *bc, 333 unsigned char *data, unsigned long len) 334 { 335 336 #ifdef KISS_VERBOSE 337 #define PKP(a,b) printk(KERN_INFO "baycomm_epp: channel params: " a "\n", b) 338 #else /* KISS_VERBOSE */ 339 #define PKP(a,b) 340 #endif /* KISS_VERBOSE */ 341 342 if (len < 2) 343 return; 344 switch(data[0]) { 345 case PARAM_TXDELAY: 346 bc->ch_params.tx_delay = data[1]; 347 PKP("TX delay = %ums", 10 * bc->ch_params.tx_delay); 348 break; 349 case PARAM_PERSIST: 350 bc->ch_params.ppersist = data[1]; 351 PKP("p persistence = %u", bc->ch_params.ppersist); 352 break; 353 case PARAM_SLOTTIME: 354 bc->ch_params.slottime = data[1]; 355 PKP("slot time = %ums", bc->ch_params.slottime); 356 break; 357 case PARAM_TXTAIL: 358 bc->ch_params.tx_tail = data[1]; 359 PKP("TX tail = %ums", bc->ch_params.tx_tail); 360 break; 361 case PARAM_FULLDUP: 362 bc->ch_params.fulldup = !!data[1]; 363 PKP("%s duplex", bc->ch_params.fulldup ? "full" : "half"); 364 break; 365 default: 366 break; 367 } 368 #undef PKP 369 } 370 371 /* --------------------------------------------------------------------- */ 372 373 static void encode_hdlc(struct baycom_state *bc) 374 { 375 struct sk_buff *skb; 376 unsigned char *wp, *bp; 377 int pkt_len; 378 unsigned bitstream, notbitstream, bitbuf, numbit, crc; 379 unsigned char crcarr[2]; 380 int j; 381 382 if (bc->hdlctx.bufcnt > 0) 383 return; 384 skb = bc->skb; 385 if (!skb) 386 return; 387 bc->skb = NULL; 388 pkt_len = skb->len-1; /* strip KISS byte */ 389 wp = bc->hdlctx.buf; 390 bp = skb->data+1; 391 crc = calc_crc_ccitt(bp, pkt_len); 392 crcarr[0] = crc; 393 crcarr[1] = crc >> 8; 394 *wp++ = 0x7e; 395 bitstream = bitbuf = numbit = 0; 396 while (pkt_len > -2) { 397 bitstream >>= 8; 398 bitstream |= ((unsigned int)*bp) << 8; 399 bitbuf |= ((unsigned int)*bp) << numbit; 400 notbitstream = ~bitstream; 401 bp++; 402 pkt_len--; 403 if (!pkt_len) 404 bp = crcarr; 405 for (j = 0; j < 8; j++) 406 if (unlikely(!(notbitstream & (0x1f0 << j)))) { 407 bitstream &= ~(0x100 << j); 408 bitbuf = (bitbuf & (((2 << j) << numbit) - 1)) | 409 ((bitbuf & ~(((2 << j) << numbit) - 1)) << 1); 410 numbit++; 411 notbitstream = ~bitstream; 412 } 413 numbit += 8; 414 while (numbit >= 8) { 415 *wp++ = bitbuf; 416 bitbuf >>= 8; 417 numbit -= 8; 418 } 419 } 420 bitbuf |= 0x7e7e << numbit; 421 numbit += 16; 422 while (numbit >= 8) { 423 *wp++ = bitbuf; 424 bitbuf >>= 8; 425 numbit -= 8; 426 } 427 bc->hdlctx.bufptr = bc->hdlctx.buf; 428 bc->hdlctx.bufcnt = wp - bc->hdlctx.buf; 429 dev_kfree_skb(skb); 430 bc->dev->stats.tx_packets++; 431 } 432 433 /* ---------------------------------------------------------------------- */ 434 435 static int transmit(struct baycom_state *bc, int cnt, unsigned char stat) 436 { 437 struct parport *pp = bc->pdev->port; 438 unsigned char tmp[128]; 439 int i, j; 440 441 if (bc->hdlctx.state == tx_tail && !(stat & EPP_PTTBIT)) 442 bc->hdlctx.state = tx_idle; 443 if (bc->hdlctx.state == tx_idle && bc->hdlctx.calibrate <= 0) { 444 if (bc->hdlctx.bufcnt <= 0) 445 encode_hdlc(bc); 446 if (bc->hdlctx.bufcnt <= 0) 447 return 0; 448 if (!bc->ch_params.fulldup) { 449 if (!(stat & EPP_DCDBIT)) { 450 bc->hdlctx.slotcnt = bc->ch_params.slottime; 451 return 0; 452 } 453 if ((--bc->hdlctx.slotcnt) > 0) 454 return 0; 455 bc->hdlctx.slotcnt = bc->ch_params.slottime; 456 if ((prandom_u32() % 256) > bc->ch_params.ppersist) 457 return 0; 458 } 459 } 460 if (bc->hdlctx.state == tx_idle && bc->hdlctx.bufcnt > 0) { 461 bc->hdlctx.state = tx_keyup; 462 bc->hdlctx.flags = tenms_to_flags(bc, bc->ch_params.tx_delay); 463 bc->ptt_keyed++; 464 } 465 while (cnt > 0) { 466 switch (bc->hdlctx.state) { 467 case tx_keyup: 468 i = min_t(int, cnt, bc->hdlctx.flags); 469 cnt -= i; 470 bc->hdlctx.flags -= i; 471 if (bc->hdlctx.flags <= 0) 472 bc->hdlctx.state = tx_data; 473 memset(tmp, 0x7e, sizeof(tmp)); 474 while (i > 0) { 475 j = (i > sizeof(tmp)) ? sizeof(tmp) : i; 476 if (j != pp->ops->epp_write_data(pp, tmp, j, 0)) 477 return -1; 478 i -= j; 479 } 480 break; 481 482 case tx_data: 483 if (bc->hdlctx.bufcnt <= 0) { 484 encode_hdlc(bc); 485 if (bc->hdlctx.bufcnt <= 0) { 486 bc->hdlctx.state = tx_tail; 487 bc->hdlctx.flags = tenms_to_flags(bc, bc->ch_params.tx_tail); 488 break; 489 } 490 } 491 i = min_t(int, cnt, bc->hdlctx.bufcnt); 492 bc->hdlctx.bufcnt -= i; 493 cnt -= i; 494 if (i != pp->ops->epp_write_data(pp, bc->hdlctx.bufptr, i, 0)) 495 return -1; 496 bc->hdlctx.bufptr += i; 497 break; 498 499 case tx_tail: 500 encode_hdlc(bc); 501 if (bc->hdlctx.bufcnt > 0) { 502 bc->hdlctx.state = tx_data; 503 break; 504 } 505 i = min_t(int, cnt, bc->hdlctx.flags); 506 if (i) { 507 cnt -= i; 508 bc->hdlctx.flags -= i; 509 memset(tmp, 0x7e, sizeof(tmp)); 510 while (i > 0) { 511 j = (i > sizeof(tmp)) ? sizeof(tmp) : i; 512 if (j != pp->ops->epp_write_data(pp, tmp, j, 0)) 513 return -1; 514 i -= j; 515 } 516 break; 517 } 518 519 default: /* fall through */ 520 if (bc->hdlctx.calibrate <= 0) 521 return 0; 522 i = min_t(int, cnt, bc->hdlctx.calibrate); 523 cnt -= i; 524 bc->hdlctx.calibrate -= i; 525 memset(tmp, 0, sizeof(tmp)); 526 while (i > 0) { 527 j = (i > sizeof(tmp)) ? sizeof(tmp) : i; 528 if (j != pp->ops->epp_write_data(pp, tmp, j, 0)) 529 return -1; 530 i -= j; 531 } 532 break; 533 } 534 } 535 return 0; 536 } 537 538 /* ---------------------------------------------------------------------- */ 539 540 static void do_rxpacket(struct net_device *dev) 541 { 542 struct baycom_state *bc = netdev_priv(dev); 543 struct sk_buff *skb; 544 unsigned char *cp; 545 unsigned pktlen; 546 547 if (bc->hdlcrx.bufcnt < 4) 548 return; 549 if (!check_crc_ccitt(bc->hdlcrx.buf, bc->hdlcrx.bufcnt)) 550 return; 551 pktlen = bc->hdlcrx.bufcnt-2+1; /* KISS kludge */ 552 if (!(skb = dev_alloc_skb(pktlen))) { 553 printk("%s: memory squeeze, dropping packet\n", dev->name); 554 dev->stats.rx_dropped++; 555 return; 556 } 557 cp = skb_put(skb, pktlen); 558 *cp++ = 0; /* KISS kludge */ 559 memcpy(cp, bc->hdlcrx.buf, pktlen - 1); 560 skb->protocol = ax25_type_trans(skb, dev); 561 netif_rx(skb); 562 dev->stats.rx_packets++; 563 } 564 565 static int receive(struct net_device *dev, int cnt) 566 { 567 struct baycom_state *bc = netdev_priv(dev); 568 struct parport *pp = bc->pdev->port; 569 unsigned int bitbuf, notbitstream, bitstream, numbits, state; 570 unsigned char tmp[128]; 571 unsigned char *cp; 572 int cnt2, ret = 0; 573 int j; 574 575 numbits = bc->hdlcrx.numbits; 576 state = bc->hdlcrx.state; 577 bitstream = bc->hdlcrx.bitstream; 578 bitbuf = bc->hdlcrx.bitbuf; 579 while (cnt > 0) { 580 cnt2 = (cnt > sizeof(tmp)) ? sizeof(tmp) : cnt; 581 cnt -= cnt2; 582 if (cnt2 != pp->ops->epp_read_data(pp, tmp, cnt2, 0)) { 583 ret = -1; 584 break; 585 } 586 cp = tmp; 587 for (; cnt2 > 0; cnt2--, cp++) { 588 bitstream >>= 8; 589 bitstream |= (*cp) << 8; 590 bitbuf >>= 8; 591 bitbuf |= (*cp) << 8; 592 numbits += 8; 593 notbitstream = ~bitstream; 594 for (j = 0; j < 8; j++) { 595 596 /* flag or abort */ 597 if (unlikely(!(notbitstream & (0x0fc << j)))) { 598 599 /* abort received */ 600 if (!(notbitstream & (0x1fc << j))) 601 state = 0; 602 603 /* flag received */ 604 else if ((bitstream & (0x1fe << j)) == (0x0fc << j)) { 605 if (state) 606 do_rxpacket(dev); 607 bc->hdlcrx.bufcnt = 0; 608 bc->hdlcrx.bufptr = bc->hdlcrx.buf; 609 state = 1; 610 numbits = 7-j; 611 } 612 } 613 614 /* stuffed bit */ 615 else if (unlikely((bitstream & (0x1f8 << j)) == (0xf8 << j))) { 616 numbits--; 617 bitbuf = (bitbuf & ((~0xff) << j)) | ((bitbuf & ~((~0xff) << j)) << 1); 618 } 619 } 620 while (state && numbits >= 8) { 621 if (bc->hdlcrx.bufcnt >= TXBUFFER_SIZE) { 622 state = 0; 623 } else { 624 *(bc->hdlcrx.bufptr)++ = bitbuf >> (16-numbits); 625 bc->hdlcrx.bufcnt++; 626 numbits -= 8; 627 } 628 } 629 } 630 } 631 bc->hdlcrx.numbits = numbits; 632 bc->hdlcrx.state = state; 633 bc->hdlcrx.bitstream = bitstream; 634 bc->hdlcrx.bitbuf = bitbuf; 635 return ret; 636 } 637 638 /* --------------------------------------------------------------------- */ 639 640 #ifdef __i386__ 641 #include <asm/msr.h> 642 #define GETTICK(x) \ 643 ({ \ 644 if (boot_cpu_has(X86_FEATURE_TSC)) \ 645 x = (unsigned int)rdtsc(); \ 646 }) 647 #else /* __i386__ */ 648 #define GETTICK(x) 649 #endif /* __i386__ */ 650 651 static void epp_bh(struct work_struct *work) 652 { 653 struct net_device *dev; 654 struct baycom_state *bc; 655 struct parport *pp; 656 unsigned char stat; 657 unsigned char tmp[2]; 658 unsigned int time1 = 0, time2 = 0, time3 = 0; 659 int cnt, cnt2; 660 661 bc = container_of(work, struct baycom_state, run_work.work); 662 dev = bc->dev; 663 if (!bc->work_running) 664 return; 665 baycom_int_freq(bc); 666 pp = bc->pdev->port; 667 /* update status */ 668 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1) 669 goto epptimeout; 670 bc->stat = stat; 671 bc->debug_vals.last_pllcorr = stat; 672 GETTICK(time1); 673 if (bc->modem == EPP_FPGAEXTSTATUS) { 674 /* get input count */ 675 tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE|1; 676 if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1) 677 goto epptimeout; 678 if (pp->ops->epp_read_addr(pp, tmp, 2, 0) != 2) 679 goto epptimeout; 680 cnt = tmp[0] | (tmp[1] << 8); 681 cnt &= 0x7fff; 682 /* get output count */ 683 tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE|2; 684 if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1) 685 goto epptimeout; 686 if (pp->ops->epp_read_addr(pp, tmp, 2, 0) != 2) 687 goto epptimeout; 688 cnt2 = tmp[0] | (tmp[1] << 8); 689 cnt2 = 16384 - (cnt2 & 0x7fff); 690 /* return to normal */ 691 tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE; 692 if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1) 693 goto epptimeout; 694 if (transmit(bc, cnt2, stat)) 695 goto epptimeout; 696 GETTICK(time2); 697 if (receive(dev, cnt)) 698 goto epptimeout; 699 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1) 700 goto epptimeout; 701 bc->stat = stat; 702 } else { 703 /* try to tx */ 704 switch (stat & (EPP_NTAEF|EPP_NTHF)) { 705 case EPP_NTHF: 706 cnt = 2048 - 256; 707 break; 708 709 case EPP_NTAEF: 710 cnt = 2048 - 1793; 711 break; 712 713 case 0: 714 cnt = 0; 715 break; 716 717 default: 718 cnt = 2048 - 1025; 719 break; 720 } 721 if (transmit(bc, cnt, stat)) 722 goto epptimeout; 723 GETTICK(time2); 724 /* do receiver */ 725 while ((stat & (EPP_NRAEF|EPP_NRHF)) != EPP_NRHF) { 726 switch (stat & (EPP_NRAEF|EPP_NRHF)) { 727 case EPP_NRAEF: 728 cnt = 1025; 729 break; 730 731 case 0: 732 cnt = 1793; 733 break; 734 735 default: 736 cnt = 256; 737 break; 738 } 739 if (receive(dev, cnt)) 740 goto epptimeout; 741 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1) 742 goto epptimeout; 743 } 744 cnt = 0; 745 if (bc->bitrate < 50000) 746 cnt = 256; 747 else if (bc->bitrate < 100000) 748 cnt = 128; 749 while (cnt > 0 && stat & EPP_NREF) { 750 if (receive(dev, 1)) 751 goto epptimeout; 752 cnt--; 753 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1) 754 goto epptimeout; 755 } 756 } 757 GETTICK(time3); 758 #ifdef BAYCOM_DEBUG 759 bc->debug_vals.mod_cycles = time2 - time1; 760 bc->debug_vals.demod_cycles = time3 - time2; 761 #endif /* BAYCOM_DEBUG */ 762 schedule_delayed_work(&bc->run_work, 1); 763 if (!bc->skb) 764 netif_wake_queue(dev); 765 return; 766 epptimeout: 767 printk(KERN_ERR "%s: EPP timeout!\n", bc_drvname); 768 } 769 770 /* ---------------------------------------------------------------------- */ 771 /* 772 * ===================== network driver interface ========================= 773 */ 774 775 static int baycom_send_packet(struct sk_buff *skb, struct net_device *dev) 776 { 777 struct baycom_state *bc = netdev_priv(dev); 778 779 if (skb->protocol == htons(ETH_P_IP)) 780 return ax25_ip_xmit(skb); 781 782 if (skb->data[0] != 0) { 783 do_kiss_params(bc, skb->data, skb->len); 784 dev_kfree_skb(skb); 785 return NETDEV_TX_OK; 786 } 787 if (bc->skb) { 788 dev_kfree_skb(skb); 789 return NETDEV_TX_OK; 790 } 791 /* strip KISS byte */ 792 if (skb->len >= HDLCDRV_MAXFLEN+1 || skb->len < 3) { 793 dev_kfree_skb(skb); 794 return NETDEV_TX_OK; 795 } 796 netif_stop_queue(dev); 797 bc->skb = skb; 798 return NETDEV_TX_OK; 799 } 800 801 /* --------------------------------------------------------------------- */ 802 803 static int baycom_set_mac_address(struct net_device *dev, void *addr) 804 { 805 struct sockaddr *sa = (struct sockaddr *)addr; 806 807 /* addr is an AX.25 shifted ASCII mac address */ 808 memcpy(dev->dev_addr, sa->sa_data, dev->addr_len); 809 return 0; 810 } 811 812 /* --------------------------------------------------------------------- */ 813 814 static void epp_wakeup(void *handle) 815 { 816 struct net_device *dev = (struct net_device *)handle; 817 struct baycom_state *bc = netdev_priv(dev); 818 819 printk(KERN_DEBUG "baycom_epp: %s: why am I being woken up?\n", dev->name); 820 if (!parport_claim(bc->pdev)) 821 printk(KERN_DEBUG "baycom_epp: %s: I'm broken.\n", dev->name); 822 } 823 824 /* --------------------------------------------------------------------- */ 825 826 /* 827 * Open/initialize the board. This is called (in the current kernel) 828 * sometime after booting when the 'ifconfig' program is run. 829 * 830 * This routine should set everything up anew at each open, even 831 * registers that "should" only need to be set once at boot, so that 832 * there is non-reboot way to recover if something goes wrong. 833 */ 834 835 static int epp_open(struct net_device *dev) 836 { 837 struct baycom_state *bc = netdev_priv(dev); 838 struct parport *pp = parport_find_base(dev->base_addr); 839 unsigned int i, j; 840 unsigned char tmp[128]; 841 unsigned char stat; 842 unsigned long tstart; 843 844 if (!pp) { 845 printk(KERN_ERR "%s: parport at 0x%lx unknown\n", bc_drvname, dev->base_addr); 846 return -ENXIO; 847 } 848 #if 0 849 if (pp->irq < 0) { 850 printk(KERN_ERR "%s: parport at 0x%lx has no irq\n", bc_drvname, pp->base); 851 parport_put_port(pp); 852 return -ENXIO; 853 } 854 #endif 855 if ((~pp->modes) & (PARPORT_MODE_TRISTATE | PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT)) { 856 printk(KERN_ERR "%s: parport at 0x%lx cannot be used\n", 857 bc_drvname, pp->base); 858 parport_put_port(pp); 859 return -EIO; 860 } 861 memset(&bc->modem, 0, sizeof(bc->modem)); 862 bc->pdev = parport_register_device(pp, dev->name, NULL, epp_wakeup, 863 NULL, PARPORT_DEV_EXCL, dev); 864 parport_put_port(pp); 865 if (!bc->pdev) { 866 printk(KERN_ERR "%s: cannot register parport at 0x%lx\n", bc_drvname, pp->base); 867 return -ENXIO; 868 } 869 if (parport_claim(bc->pdev)) { 870 printk(KERN_ERR "%s: parport at 0x%lx busy\n", bc_drvname, pp->base); 871 parport_unregister_device(bc->pdev); 872 return -EBUSY; 873 } 874 dev->irq = /*pp->irq*/ 0; 875 INIT_DELAYED_WORK(&bc->run_work, epp_bh); 876 bc->work_running = 1; 877 bc->modem = EPP_CONVENTIONAL; 878 if (eppconfig(bc)) 879 printk(KERN_INFO "%s: no FPGA detected, assuming conventional EPP modem\n", bc_drvname); 880 else 881 bc->modem = /*EPP_FPGA*/ EPP_FPGAEXTSTATUS; 882 parport_write_control(pp, LPTCTRL_PROGRAM); /* prepare EPP mode; we aren't using interrupts */ 883 /* reset the modem */ 884 tmp[0] = 0; 885 tmp[1] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE; 886 if (pp->ops->epp_write_addr(pp, tmp, 2, 0) != 2) 887 goto epptimeout; 888 /* autoprobe baud rate */ 889 tstart = jiffies; 890 i = 0; 891 while (time_before(jiffies, tstart + HZ/3)) { 892 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1) 893 goto epptimeout; 894 if ((stat & (EPP_NRAEF|EPP_NRHF)) == EPP_NRHF) { 895 schedule(); 896 continue; 897 } 898 if (pp->ops->epp_read_data(pp, tmp, 128, 0) != 128) 899 goto epptimeout; 900 if (pp->ops->epp_read_data(pp, tmp, 128, 0) != 128) 901 goto epptimeout; 902 i += 256; 903 } 904 for (j = 0; j < 256; j++) { 905 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1) 906 goto epptimeout; 907 if (!(stat & EPP_NREF)) 908 break; 909 if (pp->ops->epp_read_data(pp, tmp, 1, 0) != 1) 910 goto epptimeout; 911 i++; 912 } 913 tstart = jiffies - tstart; 914 bc->bitrate = i * (8 * HZ) / tstart; 915 j = 1; 916 i = bc->bitrate >> 3; 917 while (j < 7 && i > 150) { 918 j++; 919 i >>= 1; 920 } 921 printk(KERN_INFO "%s: autoprobed bitrate: %d int divider: %d int rate: %d\n", 922 bc_drvname, bc->bitrate, j, bc->bitrate >> (j+2)); 923 tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE/*|j*/; 924 if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1) 925 goto epptimeout; 926 /* 927 * initialise hdlc variables 928 */ 929 bc->hdlcrx.state = 0; 930 bc->hdlcrx.numbits = 0; 931 bc->hdlctx.state = tx_idle; 932 bc->hdlctx.bufcnt = 0; 933 bc->hdlctx.slotcnt = bc->ch_params.slottime; 934 bc->hdlctx.calibrate = 0; 935 /* start the bottom half stuff */ 936 schedule_delayed_work(&bc->run_work, 1); 937 netif_start_queue(dev); 938 return 0; 939 940 epptimeout: 941 printk(KERN_ERR "%s: epp timeout during bitrate probe\n", bc_drvname); 942 parport_write_control(pp, 0); /* reset the adapter */ 943 parport_release(bc->pdev); 944 parport_unregister_device(bc->pdev); 945 return -EIO; 946 } 947 948 /* --------------------------------------------------------------------- */ 949 950 static int epp_close(struct net_device *dev) 951 { 952 struct baycom_state *bc = netdev_priv(dev); 953 struct parport *pp = bc->pdev->port; 954 unsigned char tmp[1]; 955 956 bc->work_running = 0; 957 cancel_delayed_work_sync(&bc->run_work); 958 bc->stat = EPP_DCDBIT; 959 tmp[0] = 0; 960 pp->ops->epp_write_addr(pp, tmp, 1, 0); 961 parport_write_control(pp, 0); /* reset the adapter */ 962 parport_release(bc->pdev); 963 parport_unregister_device(bc->pdev); 964 if (bc->skb) 965 dev_kfree_skb(bc->skb); 966 bc->skb = NULL; 967 printk(KERN_INFO "%s: close epp at iobase 0x%lx irq %u\n", 968 bc_drvname, dev->base_addr, dev->irq); 969 return 0; 970 } 971 972 /* --------------------------------------------------------------------- */ 973 974 static int baycom_setmode(struct baycom_state *bc, const char *modestr) 975 { 976 const char *cp; 977 978 if (strstr(modestr,"intclk")) 979 bc->cfg.intclk = 1; 980 if (strstr(modestr,"extclk")) 981 bc->cfg.intclk = 0; 982 if (strstr(modestr,"intmodem")) 983 bc->cfg.extmodem = 0; 984 if (strstr(modestr,"extmodem")) 985 bc->cfg.extmodem = 1; 986 if (strstr(modestr,"noloopback")) 987 bc->cfg.loopback = 0; 988 if (strstr(modestr,"loopback")) 989 bc->cfg.loopback = 1; 990 if ((cp = strstr(modestr,"fclk="))) { 991 bc->cfg.fclk = simple_strtoul(cp+5, NULL, 0); 992 if (bc->cfg.fclk < 1000000) 993 bc->cfg.fclk = 1000000; 994 if (bc->cfg.fclk > 25000000) 995 bc->cfg.fclk = 25000000; 996 } 997 if ((cp = strstr(modestr,"bps="))) { 998 bc->cfg.bps = simple_strtoul(cp+4, NULL, 0); 999 if (bc->cfg.bps < 1000) 1000 bc->cfg.bps = 1000; 1001 if (bc->cfg.bps > 1500000) 1002 bc->cfg.bps = 1500000; 1003 } 1004 return 0; 1005 } 1006 1007 /* --------------------------------------------------------------------- */ 1008 1009 static int baycom_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) 1010 { 1011 struct baycom_state *bc = netdev_priv(dev); 1012 struct hdlcdrv_ioctl hi; 1013 1014 if (cmd != SIOCDEVPRIVATE) 1015 return -ENOIOCTLCMD; 1016 1017 if (copy_from_user(&hi, ifr->ifr_data, sizeof(hi))) 1018 return -EFAULT; 1019 switch (hi.cmd) { 1020 default: 1021 return -ENOIOCTLCMD; 1022 1023 case HDLCDRVCTL_GETCHANNELPAR: 1024 hi.data.cp.tx_delay = bc->ch_params.tx_delay; 1025 hi.data.cp.tx_tail = bc->ch_params.tx_tail; 1026 hi.data.cp.slottime = bc->ch_params.slottime; 1027 hi.data.cp.ppersist = bc->ch_params.ppersist; 1028 hi.data.cp.fulldup = bc->ch_params.fulldup; 1029 break; 1030 1031 case HDLCDRVCTL_SETCHANNELPAR: 1032 if (!capable(CAP_NET_ADMIN)) 1033 return -EACCES; 1034 bc->ch_params.tx_delay = hi.data.cp.tx_delay; 1035 bc->ch_params.tx_tail = hi.data.cp.tx_tail; 1036 bc->ch_params.slottime = hi.data.cp.slottime; 1037 bc->ch_params.ppersist = hi.data.cp.ppersist; 1038 bc->ch_params.fulldup = hi.data.cp.fulldup; 1039 bc->hdlctx.slotcnt = 1; 1040 return 0; 1041 1042 case HDLCDRVCTL_GETMODEMPAR: 1043 hi.data.mp.iobase = dev->base_addr; 1044 hi.data.mp.irq = dev->irq; 1045 hi.data.mp.dma = dev->dma; 1046 hi.data.mp.dma2 = 0; 1047 hi.data.mp.seriobase = 0; 1048 hi.data.mp.pariobase = 0; 1049 hi.data.mp.midiiobase = 0; 1050 break; 1051 1052 case HDLCDRVCTL_SETMODEMPAR: 1053 if ((!capable(CAP_SYS_RAWIO)) || netif_running(dev)) 1054 return -EACCES; 1055 dev->base_addr = hi.data.mp.iobase; 1056 dev->irq = /*hi.data.mp.irq*/0; 1057 dev->dma = /*hi.data.mp.dma*/0; 1058 return 0; 1059 1060 case HDLCDRVCTL_GETSTAT: 1061 hi.data.cs.ptt = !!(bc->stat & EPP_PTTBIT); 1062 hi.data.cs.dcd = !(bc->stat & EPP_DCDBIT); 1063 hi.data.cs.ptt_keyed = bc->ptt_keyed; 1064 hi.data.cs.tx_packets = dev->stats.tx_packets; 1065 hi.data.cs.tx_errors = dev->stats.tx_errors; 1066 hi.data.cs.rx_packets = dev->stats.rx_packets; 1067 hi.data.cs.rx_errors = dev->stats.rx_errors; 1068 break; 1069 1070 case HDLCDRVCTL_OLDGETSTAT: 1071 hi.data.ocs.ptt = !!(bc->stat & EPP_PTTBIT); 1072 hi.data.ocs.dcd = !(bc->stat & EPP_DCDBIT); 1073 hi.data.ocs.ptt_keyed = bc->ptt_keyed; 1074 break; 1075 1076 case HDLCDRVCTL_CALIBRATE: 1077 if (!capable(CAP_SYS_RAWIO)) 1078 return -EACCES; 1079 bc->hdlctx.calibrate = hi.data.calibrate * bc->bitrate / 8; 1080 return 0; 1081 1082 case HDLCDRVCTL_DRIVERNAME: 1083 strncpy(hi.data.drivername, "baycom_epp", sizeof(hi.data.drivername)); 1084 break; 1085 1086 case HDLCDRVCTL_GETMODE: 1087 sprintf(hi.data.modename, "%sclk,%smodem,fclk=%d,bps=%d%s", 1088 bc->cfg.intclk ? "int" : "ext", 1089 bc->cfg.extmodem ? "ext" : "int", bc->cfg.fclk, bc->cfg.bps, 1090 bc->cfg.loopback ? ",loopback" : ""); 1091 break; 1092 1093 case HDLCDRVCTL_SETMODE: 1094 if (!capable(CAP_NET_ADMIN) || netif_running(dev)) 1095 return -EACCES; 1096 hi.data.modename[sizeof(hi.data.modename)-1] = '\0'; 1097 return baycom_setmode(bc, hi.data.modename); 1098 1099 case HDLCDRVCTL_MODELIST: 1100 strncpy(hi.data.modename, "intclk,extclk,intmodem,extmodem,divider=x", 1101 sizeof(hi.data.modename)); 1102 break; 1103 1104 case HDLCDRVCTL_MODEMPARMASK: 1105 return HDLCDRV_PARMASK_IOBASE; 1106 1107 } 1108 if (copy_to_user(ifr->ifr_data, &hi, sizeof(hi))) 1109 return -EFAULT; 1110 return 0; 1111 } 1112 1113 /* --------------------------------------------------------------------- */ 1114 1115 static const struct net_device_ops baycom_netdev_ops = { 1116 .ndo_open = epp_open, 1117 .ndo_stop = epp_close, 1118 .ndo_do_ioctl = baycom_ioctl, 1119 .ndo_start_xmit = baycom_send_packet, 1120 .ndo_set_mac_address = baycom_set_mac_address, 1121 }; 1122 1123 /* 1124 * Check for a network adaptor of this type, and return '0' if one exists. 1125 * If dev->base_addr == 0, probe all likely locations. 1126 * If dev->base_addr == 1, always return failure. 1127 * If dev->base_addr == 2, allocate space for the device and return success 1128 * (detachable devices only). 1129 */ 1130 static void baycom_probe(struct net_device *dev) 1131 { 1132 const struct hdlcdrv_channel_params dflt_ch_params = { 1133 20, 2, 10, 40, 0 1134 }; 1135 struct baycom_state *bc; 1136 1137 /* 1138 * not a real probe! only initialize data structures 1139 */ 1140 bc = netdev_priv(dev); 1141 /* 1142 * initialize the baycom_state struct 1143 */ 1144 bc->ch_params = dflt_ch_params; 1145 bc->ptt_keyed = 0; 1146 1147 /* 1148 * initialize the device struct 1149 */ 1150 1151 /* Fill in the fields of the device structure */ 1152 bc->skb = NULL; 1153 1154 dev->netdev_ops = &baycom_netdev_ops; 1155 dev->header_ops = &ax25_header_ops; 1156 1157 dev->type = ARPHRD_AX25; /* AF_AX25 device */ 1158 dev->hard_header_len = AX25_MAX_HEADER_LEN + AX25_BPQ_HEADER_LEN; 1159 dev->mtu = AX25_DEF_PACLEN; /* eth_mtu is the default */ 1160 dev->addr_len = AX25_ADDR_LEN; /* sizeof an ax.25 address */ 1161 memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN); 1162 memcpy(dev->dev_addr, &null_ax25_address, AX25_ADDR_LEN); 1163 dev->tx_queue_len = 16; 1164 1165 /* New style flags */ 1166 dev->flags = 0; 1167 } 1168 1169 /* --------------------------------------------------------------------- */ 1170 1171 /* 1172 * command line settable parameters 1173 */ 1174 static char *mode[NR_PORTS] = { "", }; 1175 static int iobase[NR_PORTS] = { 0x378, }; 1176 1177 module_param_array(mode, charp, NULL, 0); 1178 MODULE_PARM_DESC(mode, "baycom operating mode"); 1179 module_param_array(iobase, int, NULL, 0); 1180 MODULE_PARM_DESC(iobase, "baycom io base address"); 1181 1182 MODULE_AUTHOR("Thomas M. Sailer, sailer@ife.ee.ethz.ch, hb9jnx@hb9w.che.eu"); 1183 MODULE_DESCRIPTION("Baycom epp amateur radio modem driver"); 1184 MODULE_LICENSE("GPL"); 1185 1186 /* --------------------------------------------------------------------- */ 1187 1188 static void __init baycom_epp_dev_setup(struct net_device *dev) 1189 { 1190 struct baycom_state *bc = netdev_priv(dev); 1191 1192 /* 1193 * initialize part of the baycom_state struct 1194 */ 1195 bc->dev = dev; 1196 bc->magic = BAYCOM_MAGIC; 1197 bc->cfg.fclk = 19666600; 1198 bc->cfg.bps = 9600; 1199 /* 1200 * initialize part of the device struct 1201 */ 1202 baycom_probe(dev); 1203 } 1204 1205 static int __init init_baycomepp(void) 1206 { 1207 int i, found = 0; 1208 char set_hw = 1; 1209 1210 printk(bc_drvinfo); 1211 /* 1212 * register net devices 1213 */ 1214 for (i = 0; i < NR_PORTS; i++) { 1215 struct net_device *dev; 1216 1217 dev = alloc_netdev(sizeof(struct baycom_state), "bce%d", 1218 NET_NAME_UNKNOWN, baycom_epp_dev_setup); 1219 1220 if (!dev) { 1221 printk(KERN_WARNING "bce%d : out of memory\n", i); 1222 return found ? 0 : -ENOMEM; 1223 } 1224 1225 sprintf(dev->name, "bce%d", i); 1226 dev->base_addr = iobase[i]; 1227 1228 if (!mode[i]) 1229 set_hw = 0; 1230 if (!set_hw) 1231 iobase[i] = 0; 1232 1233 if (register_netdev(dev)) { 1234 printk(KERN_WARNING "%s: cannot register net device %s\n", bc_drvname, dev->name); 1235 free_netdev(dev); 1236 break; 1237 } 1238 if (set_hw && baycom_setmode(netdev_priv(dev), mode[i])) 1239 set_hw = 0; 1240 baycom_device[i] = dev; 1241 found++; 1242 } 1243 1244 return found ? 0 : -ENXIO; 1245 } 1246 1247 static void __exit cleanup_baycomepp(void) 1248 { 1249 int i; 1250 1251 for(i = 0; i < NR_PORTS; i++) { 1252 struct net_device *dev = baycom_device[i]; 1253 1254 if (dev) { 1255 struct baycom_state *bc = netdev_priv(dev); 1256 if (bc->magic == BAYCOM_MAGIC) { 1257 unregister_netdev(dev); 1258 free_netdev(dev); 1259 } else 1260 printk(paranoia_str, "cleanup_module"); 1261 } 1262 } 1263 } 1264 1265 module_init(init_baycomepp); 1266 module_exit(cleanup_baycomepp); 1267 1268 /* --------------------------------------------------------------------- */ 1269 1270 #ifndef MODULE 1271 1272 /* 1273 * format: baycom_epp=io,mode 1274 * mode: fpga config options 1275 */ 1276 1277 static int __init baycom_epp_setup(char *str) 1278 { 1279 static unsigned __initdata nr_dev = 0; 1280 int ints[2]; 1281 1282 if (nr_dev >= NR_PORTS) 1283 return 0; 1284 str = get_options(str, 2, ints); 1285 if (ints[0] < 1) 1286 return 0; 1287 mode[nr_dev] = str; 1288 iobase[nr_dev] = ints[1]; 1289 nr_dev++; 1290 return 1; 1291 } 1292 1293 __setup("baycom_epp=", baycom_epp_setup); 1294 1295 #endif /* MODULE */ 1296 /* --------------------------------------------------------------------- */ 1297