1 /****************************************************************************** 2 * 3 * (C)Copyright 1998,1999 SysKonnect, 4 * a business unit of Schneider & Koch & Co. Datensysteme GmbH. 5 * 6 * See the file "skfddi.c" for further information. 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License as published by 10 * the Free Software Foundation; either version 2 of the License, or 11 * (at your option) any later version. 12 * 13 * The information in this file is provided "AS IS" without warranty. 14 * 15 ******************************************************************************/ 16 17 /* 18 * FBI board dependent Driver for SMT and LLC 19 */ 20 21 #include "h/types.h" 22 #include "h/fddi.h" 23 #include "h/smc.h" 24 #include "h/supern_2.h" 25 #include "h/skfbiinc.h" 26 #include <linux/bitrev.h> 27 28 #ifndef lint 29 static const char ID_sccs[] = "@(#)drvfbi.c 1.63 99/02/11 (C) SK " ; 30 #endif 31 32 /* 33 * PCM active state 34 */ 35 #define PC8_ACTIVE 8 36 37 #define LED_Y_ON 0x11 /* Used for ring up/down indication */ 38 #define LED_Y_OFF 0x10 39 40 41 #define MS2BCLK(x) ((x)*12500L) 42 43 /* 44 * valid configuration values are: 45 */ 46 47 /* 48 * xPOS_ID:xxxx 49 * | \ / 50 * | \/ 51 * | --------------------- the patched POS_ID of the Adapter 52 * | xxxx = (Vendor ID low byte, 53 * | Vendor ID high byte, 54 * | Device ID low byte, 55 * | Device ID high byte) 56 * +------------------------------ the patched oem_id must be 57 * 'S' for SK or 'I' for IBM 58 * this is a short id for the driver. 59 */ 60 #ifndef MULT_OEM 61 #ifndef OEM_CONCEPT 62 const u_char oem_id[] = "xPOS_ID:xxxx" ; 63 #else /* OEM_CONCEPT */ 64 const u_char oem_id[] = OEM_ID ; 65 #endif /* OEM_CONCEPT */ 66 #define ID_BYTE0 8 67 #define OEMID(smc,i) oem_id[ID_BYTE0 + i] 68 #else /* MULT_OEM */ 69 const struct s_oem_ids oem_ids[] = { 70 #include "oemids.h" 71 {0} 72 }; 73 #define OEMID(smc,i) smc->hw.oem_id->oi_id[i] 74 #endif /* MULT_OEM */ 75 76 /* Prototypes of external functions */ 77 #ifdef AIX 78 extern int AIX_vpdReadByte() ; 79 #endif 80 81 82 /* Prototype of a local function. */ 83 static void smt_stop_watchdog(struct s_smc *smc); 84 85 /* 86 * FDDI card reset 87 */ 88 static void card_start(struct s_smc *smc) 89 { 90 int i ; 91 #ifdef PCI 92 u_char rev_id ; 93 u_short word; 94 #endif 95 96 smt_stop_watchdog(smc) ; 97 98 #ifdef PCI 99 /* 100 * make sure no transfer activity is pending 101 */ 102 outpw(FM_A(FM_MDREG1),FM_MINIT) ; 103 outp(ADDR(B0_CTRL), CTRL_HPI_SET) ; 104 hwt_wait_time(smc,hwt_quick_read(smc),MS2BCLK(10)) ; 105 /* 106 * now reset everything 107 */ 108 outp(ADDR(B0_CTRL),CTRL_RST_SET) ; /* reset for all chips */ 109 i = (int) inp(ADDR(B0_CTRL)) ; /* do dummy read */ 110 SK_UNUSED(i) ; /* Make LINT happy. */ 111 outp(ADDR(B0_CTRL), CTRL_RST_CLR) ; 112 113 /* 114 * Reset all bits in the PCI STATUS register 115 */ 116 outp(ADDR(B0_TST_CTRL), TST_CFG_WRITE_ON) ; /* enable for writes */ 117 word = inpw(PCI_C(PCI_STATUS)) ; 118 outpw(PCI_C(PCI_STATUS), word | PCI_ERRBITS) ; 119 outp(ADDR(B0_TST_CTRL), TST_CFG_WRITE_OFF) ; /* disable writes */ 120 121 /* 122 * Release the reset of all the State machines 123 * Release Master_Reset 124 * Release HPI_SM_Reset 125 */ 126 outp(ADDR(B0_CTRL), CTRL_MRST_CLR|CTRL_HPI_CLR) ; 127 128 /* 129 * determine the adapter type 130 * Note: Do it here, because some drivers may call card_start() once 131 * at very first before any other initialization functions is 132 * executed. 133 */ 134 rev_id = inp(PCI_C(PCI_REV_ID)) ; 135 if ((rev_id & 0xf0) == SK_ML_ID_1 || (rev_id & 0xf0) == SK_ML_ID_2) { 136 smc->hw.hw_is_64bit = TRUE ; 137 } else { 138 smc->hw.hw_is_64bit = FALSE ; 139 } 140 141 /* 142 * Watermark initialization 143 */ 144 if (!smc->hw.hw_is_64bit) { 145 outpd(ADDR(B4_R1_F), RX_WATERMARK) ; 146 outpd(ADDR(B5_XA_F), TX_WATERMARK) ; 147 outpd(ADDR(B5_XS_F), TX_WATERMARK) ; 148 } 149 150 outp(ADDR(B0_CTRL),CTRL_RST_CLR) ; /* clear the reset chips */ 151 outp(ADDR(B0_LED),LED_GA_OFF|LED_MY_ON|LED_GB_OFF) ; /* ye LED on */ 152 153 /* init the timer value for the watch dog 2,5 minutes */ 154 outpd(ADDR(B2_WDOG_INI),0x6FC23AC0) ; 155 156 /* initialize the ISR mask */ 157 smc->hw.is_imask = ISR_MASK ; 158 smc->hw.hw_state = STOPPED ; 159 #endif 160 GET_PAGE(0) ; /* necessary for BOOT */ 161 } 162 163 void card_stop(struct s_smc *smc) 164 { 165 smt_stop_watchdog(smc) ; 166 smc->hw.mac_ring_is_up = 0 ; /* ring down */ 167 168 #ifdef PCI 169 /* 170 * make sure no transfer activity is pending 171 */ 172 outpw(FM_A(FM_MDREG1),FM_MINIT) ; 173 outp(ADDR(B0_CTRL), CTRL_HPI_SET) ; 174 hwt_wait_time(smc,hwt_quick_read(smc),MS2BCLK(10)) ; 175 /* 176 * now reset everything 177 */ 178 outp(ADDR(B0_CTRL),CTRL_RST_SET) ; /* reset for all chips */ 179 outp(ADDR(B0_CTRL),CTRL_RST_CLR) ; /* reset for all chips */ 180 outp(ADDR(B0_LED),LED_GA_OFF|LED_MY_OFF|LED_GB_OFF) ; /* all LEDs off */ 181 smc->hw.hw_state = STOPPED ; 182 #endif 183 } 184 /*--------------------------- ISR handling ----------------------------------*/ 185 186 void mac1_irq(struct s_smc *smc, u_short stu, u_short stl) 187 { 188 int restart_tx = 0 ; 189 again: 190 191 /* 192 * parity error: note encoding error is not possible in tag mode 193 */ 194 if (stl & (FM_SPCEPDS | /* parity err. syn.q.*/ 195 FM_SPCEPDA0 | /* parity err. a.q.0 */ 196 FM_SPCEPDA1)) { /* parity err. a.q.1 */ 197 SMT_PANIC(smc,SMT_E0134, SMT_E0134_MSG) ; 198 } 199 /* 200 * buffer underrun: can only occur if a tx threshold is specified 201 */ 202 if (stl & (FM_STBURS | /* tx buffer underrun syn.q.*/ 203 FM_STBURA0 | /* tx buffer underrun a.q.0 */ 204 FM_STBURA1)) { /* tx buffer underrun a.q.2 */ 205 SMT_PANIC(smc,SMT_E0133, SMT_E0133_MSG) ; 206 } 207 208 if ( (stu & (FM_SXMTABT | /* transmit abort */ 209 FM_STXABRS | /* syn. tx abort */ 210 FM_STXABRA0)) || /* asyn. tx abort */ 211 (stl & (FM_SQLCKS | /* lock for syn. q. */ 212 FM_SQLCKA0)) ) { /* lock for asyn. q. */ 213 formac_tx_restart(smc) ; /* init tx */ 214 restart_tx = 1 ; 215 stu = inpw(FM_A(FM_ST1U)) ; 216 stl = inpw(FM_A(FM_ST1L)) ; 217 stu &= ~ (FM_STECFRMA0 | FM_STEFRMA0 | FM_STEFRMS) ; 218 if (stu || stl) 219 goto again ; 220 } 221 222 if (stu & (FM_STEFRMA0 | /* end of asyn tx */ 223 FM_STEFRMS)) { /* end of sync tx */ 224 restart_tx = 1 ; 225 } 226 227 if (restart_tx) 228 llc_restart_tx(smc) ; 229 } 230 231 /* 232 * interrupt source= plc1 233 * this function is called in nwfbisr.asm 234 */ 235 void plc1_irq(struct s_smc *smc) 236 { 237 u_short st = inpw(PLC(PB,PL_INTR_EVENT)) ; 238 239 plc_irq(smc,PB,st) ; 240 } 241 242 /* 243 * interrupt source= plc2 244 * this function is called in nwfbisr.asm 245 */ 246 void plc2_irq(struct s_smc *smc) 247 { 248 u_short st = inpw(PLC(PA,PL_INTR_EVENT)) ; 249 250 plc_irq(smc,PA,st) ; 251 } 252 253 254 /* 255 * interrupt source= timer 256 */ 257 void timer_irq(struct s_smc *smc) 258 { 259 hwt_restart(smc); 260 smc->hw.t_stop = smc->hw.t_start; 261 smt_timer_done(smc) ; 262 } 263 264 /* 265 * return S-port (PA or PB) 266 */ 267 int pcm_get_s_port(struct s_smc *smc) 268 { 269 SK_UNUSED(smc) ; 270 return PS; 271 } 272 273 /* 274 * Station Label = "FDDI-XYZ" where 275 * 276 * X = connector type 277 * Y = PMD type 278 * Z = port type 279 */ 280 #define STATION_LABEL_CONNECTOR_OFFSET 5 281 #define STATION_LABEL_PMD_OFFSET 6 282 #define STATION_LABEL_PORT_OFFSET 7 283 284 void read_address(struct s_smc *smc, u_char *mac_addr) 285 { 286 char ConnectorType ; 287 char PmdType ; 288 int i ; 289 290 #ifdef PCI 291 for (i = 0; i < 6; i++) { /* read mac address from board */ 292 smc->hw.fddi_phys_addr.a[i] = 293 bitrev8(inp(ADDR(B2_MAC_0+i))); 294 } 295 #endif 296 297 ConnectorType = inp(ADDR(B2_CONN_TYP)) ; 298 PmdType = inp(ADDR(B2_PMD_TYP)) ; 299 300 smc->y[PA].pmd_type[PMD_SK_CONN] = 301 smc->y[PB].pmd_type[PMD_SK_CONN] = ConnectorType ; 302 smc->y[PA].pmd_type[PMD_SK_PMD ] = 303 smc->y[PB].pmd_type[PMD_SK_PMD ] = PmdType ; 304 305 if (mac_addr) { 306 for (i = 0; i < 6 ;i++) { 307 smc->hw.fddi_canon_addr.a[i] = mac_addr[i] ; 308 smc->hw.fddi_home_addr.a[i] = bitrev8(mac_addr[i]); 309 } 310 return ; 311 } 312 smc->hw.fddi_home_addr = smc->hw.fddi_phys_addr ; 313 314 for (i = 0; i < 6 ;i++) { 315 smc->hw.fddi_canon_addr.a[i] = 316 bitrev8(smc->hw.fddi_phys_addr.a[i]); 317 } 318 } 319 320 /* 321 * FDDI card soft reset 322 */ 323 void init_board(struct s_smc *smc, u_char *mac_addr) 324 { 325 card_start(smc) ; 326 read_address(smc,mac_addr) ; 327 328 if (!(inp(ADDR(B0_DAS)) & DAS_AVAIL)) 329 smc->s.sas = SMT_SAS ; /* Single att. station */ 330 else 331 smc->s.sas = SMT_DAS ; /* Dual att. station */ 332 333 if (!(inp(ADDR(B0_DAS)) & DAS_BYP_ST)) 334 smc->mib.fddiSMTBypassPresent = 0 ; 335 /* without opt. bypass */ 336 else 337 smc->mib.fddiSMTBypassPresent = 1 ; 338 /* with opt. bypass */ 339 } 340 341 /* 342 * insert or deinsert optical bypass (called by ECM) 343 */ 344 void sm_pm_bypass_req(struct s_smc *smc, int mode) 345 { 346 DB_ECMN(1,"ECM : sm_pm_bypass_req(%s)\n",(mode == BP_INSERT) ? 347 "BP_INSERT" : "BP_DEINSERT",0) ; 348 349 if (smc->s.sas != SMT_DAS) 350 return ; 351 352 #ifdef PCI 353 switch(mode) { 354 case BP_INSERT : 355 outp(ADDR(B0_DAS),DAS_BYP_INS) ; /* insert station */ 356 break ; 357 case BP_DEINSERT : 358 outp(ADDR(B0_DAS),DAS_BYP_RMV) ; /* bypass station */ 359 break ; 360 } 361 #endif 362 } 363 364 /* 365 * check if bypass connected 366 */ 367 int sm_pm_bypass_present(struct s_smc *smc) 368 { 369 return (inp(ADDR(B0_DAS)) & DAS_BYP_ST) ? TRUE : FALSE; 370 } 371 372 void plc_clear_irq(struct s_smc *smc, int p) 373 { 374 SK_UNUSED(p) ; 375 376 SK_UNUSED(smc) ; 377 } 378 379 380 /* 381 * led_indication called by rmt_indication() and 382 * pcm_state_change() 383 * 384 * Input: 385 * smc: SMT context 386 * led_event: 387 * 0 Only switch green LEDs according to their respective PCM state 388 * LED_Y_OFF just switch yellow LED off 389 * LED_Y_ON just switch yello LED on 390 */ 391 static void led_indication(struct s_smc *smc, int led_event) 392 { 393 /* use smc->hw.mac_ring_is_up == TRUE 394 * as indication for Ring Operational 395 */ 396 u_short led_state ; 397 struct s_phy *phy ; 398 struct fddi_mib_p *mib_a ; 399 struct fddi_mib_p *mib_b ; 400 401 phy = &smc->y[PA] ; 402 mib_a = phy->mib ; 403 phy = &smc->y[PB] ; 404 mib_b = phy->mib ; 405 406 #ifdef PCI 407 led_state = 0 ; 408 409 /* Ring up = yellow led OFF*/ 410 if (led_event == LED_Y_ON) { 411 led_state |= LED_MY_ON ; 412 } 413 else if (led_event == LED_Y_OFF) { 414 led_state |= LED_MY_OFF ; 415 } 416 else { /* PCM state changed */ 417 /* Link at Port A/S = green led A ON */ 418 if (mib_a->fddiPORTPCMState == PC8_ACTIVE) { 419 led_state |= LED_GA_ON ; 420 } 421 else { 422 led_state |= LED_GA_OFF ; 423 } 424 425 /* Link at Port B = green led B ON */ 426 if (mib_b->fddiPORTPCMState == PC8_ACTIVE) { 427 led_state |= LED_GB_ON ; 428 } 429 else { 430 led_state |= LED_GB_OFF ; 431 } 432 } 433 434 outp(ADDR(B0_LED), led_state) ; 435 #endif /* PCI */ 436 437 } 438 439 440 void pcm_state_change(struct s_smc *smc, int plc, int p_state) 441 { 442 /* 443 * the current implementation of pcm_state_change() in the driver 444 * parts must be renamed to drv_pcm_state_change() which will be called 445 * now after led_indication. 446 */ 447 DRV_PCM_STATE_CHANGE(smc,plc,p_state) ; 448 449 led_indication(smc,0) ; 450 } 451 452 453 void rmt_indication(struct s_smc *smc, int i) 454 { 455 /* Call a driver special function if defined */ 456 DRV_RMT_INDICATION(smc,i) ; 457 458 led_indication(smc, i ? LED_Y_OFF : LED_Y_ON) ; 459 } 460 461 462 /* 463 * llc_recover_tx called by init_tx (fplus.c) 464 */ 465 void llc_recover_tx(struct s_smc *smc) 466 { 467 #ifdef LOAD_GEN 468 extern int load_gen_flag ; 469 470 load_gen_flag = 0 ; 471 #endif 472 #ifndef SYNC 473 smc->hw.n_a_send= 0 ; 474 #else 475 SK_UNUSED(smc) ; 476 #endif 477 } 478 479 #ifdef MULT_OEM 480 static int is_equal_num(char comp1[], char comp2[], int num) 481 { 482 int i ; 483 484 for (i = 0 ; i < num ; i++) { 485 if (comp1[i] != comp2[i]) 486 return 0; 487 } 488 return 1; 489 } /* is_equal_num */ 490 491 492 /* 493 * set the OEM ID defaults, and test the contents of the OEM data base 494 * The default OEM is the first ACTIVE entry in the OEM data base 495 * 496 * returns: 0 success 497 * 1 error in data base 498 * 2 data base empty 499 * 3 no active entry 500 */ 501 int set_oi_id_def(struct s_smc *smc) 502 { 503 int sel_id ; 504 int i ; 505 int act_entries ; 506 507 i = 0 ; 508 sel_id = -1 ; 509 act_entries = FALSE ; 510 smc->hw.oem_id = 0 ; 511 smc->hw.oem_min_status = OI_STAT_ACTIVE ; 512 513 /* check OEM data base */ 514 while (oem_ids[i].oi_status) { 515 switch (oem_ids[i].oi_status) { 516 case OI_STAT_ACTIVE: 517 act_entries = TRUE ; /* we have active IDs */ 518 if (sel_id == -1) 519 sel_id = i ; /* save the first active ID */ 520 case OI_STAT_VALID: 521 case OI_STAT_PRESENT: 522 i++ ; 523 break ; /* entry ok */ 524 default: 525 return 1; /* invalid oi_status */ 526 } 527 } 528 529 if (i == 0) 530 return 2; 531 if (!act_entries) 532 return 3; 533 534 /* ok, we have a valid OEM data base with an active entry */ 535 smc->hw.oem_id = (struct s_oem_ids *) &oem_ids[sel_id] ; 536 return 0; 537 } 538 #endif /* MULT_OEM */ 539 540 void driver_get_bia(struct s_smc *smc, struct fddi_addr *bia_addr) 541 { 542 int i ; 543 544 for (i = 0 ; i < 6 ; i++) 545 bia_addr->a[i] = bitrev8(smc->hw.fddi_phys_addr.a[i]); 546 } 547 548 void smt_start_watchdog(struct s_smc *smc) 549 { 550 SK_UNUSED(smc) ; /* Make LINT happy. */ 551 552 #ifndef DEBUG 553 554 #ifdef PCI 555 if (smc->hw.wdog_used) { 556 outpw(ADDR(B2_WDOG_CRTL),TIM_START) ; /* Start timer. */ 557 } 558 #endif 559 560 #endif /* DEBUG */ 561 } 562 563 static void smt_stop_watchdog(struct s_smc *smc) 564 { 565 SK_UNUSED(smc) ; /* Make LINT happy. */ 566 #ifndef DEBUG 567 568 #ifdef PCI 569 if (smc->hw.wdog_used) { 570 outpw(ADDR(B2_WDOG_CRTL),TIM_STOP) ; /* Stop timer. */ 571 } 572 #endif 573 574 #endif /* DEBUG */ 575 } 576 577 #ifdef PCI 578 579 void mac_do_pci_fix(struct s_smc *smc) 580 { 581 SK_UNUSED(smc) ; 582 } 583 #endif /* PCI */ 584 585