1# SPDX-License-Identifier: GPL-2.0-only 2# 3# FDDI network device configuration 4# 5 6config FDDI 7 tristate "FDDI driver support" 8 depends on PCI || EISA || TC 9 help 10 Fiber Distributed Data Interface is a high speed local area network 11 design; essentially a replacement for high speed Ethernet. FDDI can 12 run over copper or fiber. If you are connected to such a network and 13 want a driver for the FDDI card in your computer, say Y here (and 14 then also Y to the driver for your FDDI card, below). Most people 15 will say N. 16 17if FDDI 18 19config DEFZA 20 tristate "DEC FDDIcontroller 700/700-C (DEFZA-xx) support" 21 depends on FDDI && TC 22 help 23 This is support for the DEC FDDIcontroller 700 (DEFZA-AA, fiber) 24 and 700-C (DEFZA-CA, copper) TURBOchannel network cards which 25 can connect you to a local FDDI network. 26 27 To compile this driver as a module, choose M here: the module 28 will be called defza. If unsure, say N. 29 30config DEFXX 31 tristate "Digital DEFTA/DEFEA/DEFPA adapter support" 32 depends on FDDI && (PCI || EISA || TC) 33 help 34 This is support for the DIGITAL series of TURBOchannel (DEFTA), 35 EISA (DEFEA) and PCI (DEFPA) controllers which can connect you 36 to a local FDDI network. 37 38 To compile this driver as a module, choose M here: the module 39 will be called defxx. If unsure, say N. 40 41config DEFXX_MMIO 42 bool 43 prompt "Use MMIO instead of PIO" if PCI || EISA 44 depends on DEFXX 45 default n if PCI || EISA 46 default y 47 help 48 This instructs the driver to use EISA or PCI memory-mapped I/O 49 (MMIO) as appropriate instead of programmed I/O ports (PIO). 50 Enabling this gives an improvement in processing time in parts 51 of the driver, but it may cause problems with EISA (DEFEA) 52 adapters. TURBOchannel does not have the concept of I/O ports, 53 so MMIO is always used for these (DEFTA) adapters. 54 55 If unsure, say N. 56 57config SKFP 58 tristate "SysKonnect FDDI PCI support" 59 depends on FDDI && PCI 60 select BITREVERSE 61 help 62 Say Y here if you have a SysKonnect FDDI PCI adapter. 63 The following adapters are supported by this driver: 64 - SK-5521 (SK-NET FDDI-UP) 65 - SK-5522 (SK-NET FDDI-UP DAS) 66 - SK-5541 (SK-NET FDDI-FP) 67 - SK-5543 (SK-NET FDDI-LP) 68 - SK-5544 (SK-NET FDDI-LP DAS) 69 - SK-5821 (SK-NET FDDI-UP64) 70 - SK-5822 (SK-NET FDDI-UP64 DAS) 71 - SK-5841 (SK-NET FDDI-FP64) 72 - SK-5843 (SK-NET FDDI-LP64) 73 - SK-5844 (SK-NET FDDI-LP64 DAS) 74 - Netelligent 100 FDDI DAS Fibre SC 75 - Netelligent 100 FDDI SAS Fibre SC 76 - Netelligent 100 FDDI DAS UTP 77 - Netelligent 100 FDDI SAS UTP 78 - Netelligent 100 FDDI SAS Fibre MIC 79 80 Read <file:Documentation/networking/skfp.rst> for information about 81 the driver. 82 83 Questions concerning this driver can be addressed to: 84 <linux@syskonnect.de> 85 86 To compile this driver as a module, choose M here: the module 87 will be called skfp. This is recommended. 88 89endif # FDDI 90