xref: /openbmc/linux/drivers/net/fddi/Kconfig (revision 61414f5e)
133f810b2SJeff Kirsher#
233f810b2SJeff Kirsher# FDDI network device configuration
333f810b2SJeff Kirsher#
433f810b2SJeff Kirsher
533f810b2SJeff Kirsherconfig FDDI
633f810b2SJeff Kirsher	tristate "FDDI driver support"
733f810b2SJeff Kirsher	depends on PCI || EISA || TC
833f810b2SJeff Kirsher	---help---
933f810b2SJeff Kirsher	  Fiber Distributed Data Interface is a high speed local area network
1033f810b2SJeff Kirsher	  design; essentially a replacement for high speed Ethernet. FDDI can
1133f810b2SJeff Kirsher	  run over copper or fiber. If you are connected to such a network and
1233f810b2SJeff Kirsher	  want a driver for the FDDI card in your computer, say Y here (and
1333f810b2SJeff Kirsher	  then also Y to the driver for your FDDI card, below). Most people
1433f810b2SJeff Kirsher	  will say N.
1533f810b2SJeff Kirsher
1633f810b2SJeff Kirsherif FDDI
1733f810b2SJeff Kirsher
1861414f5eSMaciej W. Rozyckiconfig DEFZA
1961414f5eSMaciej W. Rozycki	tristate "DEC FDDIcontroller 700/700-C (DEFZA-xx) support"
2061414f5eSMaciej W. Rozycki	depends on FDDI && TC
2161414f5eSMaciej W. Rozycki	help
2261414f5eSMaciej W. Rozycki	  This is support for the DEC FDDIcontroller 700 (DEFZA-AA, fiber)
2361414f5eSMaciej W. Rozycki	  and 700-C (DEFZA-CA, copper) TURBOchannel network cards which
2461414f5eSMaciej W. Rozycki	  can connect you to a local FDDI network.
2561414f5eSMaciej W. Rozycki
2661414f5eSMaciej W. Rozycki	  To compile this driver as a module, choose M here: the module
2761414f5eSMaciej W. Rozycki	  will be called defza.  If unsure, say N.
2861414f5eSMaciej W. Rozycki
2933f810b2SJeff Kirsherconfig DEFXX
3033f810b2SJeff Kirsher	tristate "Digital DEFTA/DEFEA/DEFPA adapter support"
3133f810b2SJeff Kirsher	depends on FDDI && (PCI || EISA || TC)
3233f810b2SJeff Kirsher	---help---
3333f810b2SJeff Kirsher	  This is support for the DIGITAL series of TURBOchannel (DEFTA),
3433f810b2SJeff Kirsher	  EISA (DEFEA) and PCI (DEFPA) controllers which can connect you
3533f810b2SJeff Kirsher	  to a local FDDI network.
3633f810b2SJeff Kirsher
3733f810b2SJeff Kirsher	  To compile this driver as a module, choose M here: the module
3833f810b2SJeff Kirsher	  will be called defxx.  If unsure, say N.
3933f810b2SJeff Kirsher
4033f810b2SJeff Kirsherconfig DEFXX_MMIO
4133f810b2SJeff Kirsher	bool
4233f810b2SJeff Kirsher	prompt "Use MMIO instead of PIO" if PCI || EISA
4333f810b2SJeff Kirsher	depends on DEFXX
4433f810b2SJeff Kirsher	default n if PCI || EISA
4533f810b2SJeff Kirsher	default y
4633f810b2SJeff Kirsher	---help---
4733f810b2SJeff Kirsher	  This instructs the driver to use EISA or PCI memory-mapped I/O
4833f810b2SJeff Kirsher	  (MMIO) as appropriate instead of programmed I/O ports (PIO).
4933f810b2SJeff Kirsher	  Enabling this gives an improvement in processing time in parts
5033f810b2SJeff Kirsher	  of the driver, but it may cause problems with EISA (DEFEA)
5133f810b2SJeff Kirsher	  adapters.  TURBOchannel does not have the concept of I/O ports,
5233f810b2SJeff Kirsher	  so MMIO is always used for these (DEFTA) adapters.
5333f810b2SJeff Kirsher
5433f810b2SJeff Kirsher	  If unsure, say N.
5533f810b2SJeff Kirsher
5633f810b2SJeff Kirsherconfig SKFP
5733f810b2SJeff Kirsher	tristate "SysKonnect FDDI PCI support"
5833f810b2SJeff Kirsher	depends on FDDI && PCI
5933f810b2SJeff Kirsher	select BITREVERSE
6033f810b2SJeff Kirsher	---help---
6133f810b2SJeff Kirsher	  Say Y here if you have a SysKonnect FDDI PCI adapter.
6233f810b2SJeff Kirsher	  The following adapters are supported by this driver:
6333f810b2SJeff Kirsher	  - SK-5521 (SK-NET FDDI-UP)
6433f810b2SJeff Kirsher	  - SK-5522 (SK-NET FDDI-UP DAS)
6533f810b2SJeff Kirsher	  - SK-5541 (SK-NET FDDI-FP)
6633f810b2SJeff Kirsher	  - SK-5543 (SK-NET FDDI-LP)
6733f810b2SJeff Kirsher	  - SK-5544 (SK-NET FDDI-LP DAS)
6833f810b2SJeff Kirsher	  - SK-5821 (SK-NET FDDI-UP64)
6933f810b2SJeff Kirsher	  - SK-5822 (SK-NET FDDI-UP64 DAS)
7033f810b2SJeff Kirsher	  - SK-5841 (SK-NET FDDI-FP64)
7133f810b2SJeff Kirsher	  - SK-5843 (SK-NET FDDI-LP64)
7233f810b2SJeff Kirsher	  - SK-5844 (SK-NET FDDI-LP64 DAS)
7333f810b2SJeff Kirsher	  - Netelligent 100 FDDI DAS Fibre SC
7433f810b2SJeff Kirsher	  - Netelligent 100 FDDI SAS Fibre SC
7533f810b2SJeff Kirsher	  - Netelligent 100 FDDI DAS UTP
7633f810b2SJeff Kirsher	  - Netelligent 100 FDDI SAS UTP
7733f810b2SJeff Kirsher	  - Netelligent 100 FDDI SAS Fibre MIC
7833f810b2SJeff Kirsher
7933f810b2SJeff Kirsher	  Read <file:Documentation/networking/skfp.txt> for information about
8033f810b2SJeff Kirsher	  the driver.
8133f810b2SJeff Kirsher
8233f810b2SJeff Kirsher	  Questions concerning this driver can be addressed to:
8333f810b2SJeff Kirsher	  <linux@syskonnect.de>
8433f810b2SJeff Kirsher
8533f810b2SJeff Kirsher	  To compile this driver as a module, choose M here: the module
8633f810b2SJeff Kirsher	  will be called skfp.  This is recommended.
8733f810b2SJeff Kirsher
8833f810b2SJeff Kirsherendif # FDDI
89