1 /* [xirc2ps_cs.c wk 03.11.99] (1.40 1999/11/18 00:06:03)
2  * Xircom CreditCard Ethernet Adapter IIps driver
3  * Xircom Realport 10/100 (RE-100) driver
4  *
5  * This driver supports various Xircom CreditCard Ethernet adapters
6  * including the CE2, CE IIps, RE-10, CEM28, CEM33, CE33, CEM56,
7  * CE3-100, CE3B, RE-100, REM10BT, and REM56G-100.
8  *
9  * 2000-09-24 <psheer@icon.co.za> The Xircom CE3B-100 may not
10  * autodetect the media properly. In this case use the
11  * if_port=1 (for 10BaseT) or if_port=4 (for 100BaseT) options
12  * to force the media type.
13  *
14  * Written originally by Werner Koch based on David Hinds' skeleton of the
15  * PCMCIA driver.
16  *
17  * Copyright (c) 1997,1998 Werner Koch (dd9jn)
18  *
19  * This driver is free software; you can redistribute it and/or modify
20  * it under the terms of the GNU General Public License as published by
21  * the Free Software Foundation; either version 2 of the License, or
22  * (at your option) any later version.
23  *
24  * It is distributed in the hope that it will be useful,
25  * but WITHOUT ANY WARRANTY; without even the implied warranty of
26  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
27  * GNU General Public License for more details.
28  *
29  * You should have received a copy of the GNU General Public License
30  * along with this program; if not, see <http://www.gnu.org/licenses/>.
31  *
32  *
33  * ALTERNATIVELY, this driver may be distributed under the terms of
34  * the following license, in which case the provisions of this license
35  * are required INSTEAD OF the GNU General Public License.  (This clause
36  * is necessary due to a potential bad interaction between the GPL and
37  * the restrictions contained in a BSD-style copyright.)
38  *
39  * Redistribution and use in source and binary forms, with or without
40  * modification, are permitted provided that the following conditions
41  * are met:
42  * 1. Redistributions of source code must retain the above copyright
43  *    notice, and the entire permission notice in its entirety,
44  *    including the disclaimer of warranties.
45  * 2. Redistributions in binary form must reproduce the above copyright
46  *    notice, this list of conditions and the following disclaimer in the
47  *    documentation and/or other materials provided with the distribution.
48  * 3. The name of the author may not be used to endorse or promote
49  *    products derived from this software without specific prior
50  *    written permission.
51  *
52  * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
53  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
54  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
55  * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
56  * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
57  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
58  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
59  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
60  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
61  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
62  * OF THE POSSIBILITY OF SUCH DAMAGE.
63  */
64 
65 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
66 
67 #include <linux/module.h>
68 #include <linux/kernel.h>
69 #include <linux/init.h>
70 #include <linux/ptrace.h>
71 #include <linux/slab.h>
72 #include <linux/string.h>
73 #include <linux/timer.h>
74 #include <linux/interrupt.h>
75 #include <linux/in.h>
76 #include <linux/delay.h>
77 #include <linux/ethtool.h>
78 #include <linux/netdevice.h>
79 #include <linux/etherdevice.h>
80 #include <linux/skbuff.h>
81 #include <linux/if_arp.h>
82 #include <linux/ioport.h>
83 #include <linux/bitops.h>
84 #include <linux/mii.h>
85 
86 #include <pcmcia/cistpl.h>
87 #include <pcmcia/cisreg.h>
88 #include <pcmcia/ciscode.h>
89 
90 #include <asm/io.h>
91 #include <linux/uaccess.h>
92 
93 #ifndef MANFID_COMPAQ
94   #define MANFID_COMPAQ 	   0x0138
95   #define MANFID_COMPAQ2	   0x0183  /* is this correct? */
96 #endif
97 
98 #include <pcmcia/ds.h>
99 
100 /* Time in jiffies before concluding Tx hung */
101 #define TX_TIMEOUT	((400*HZ)/1000)
102 
103 /****************
104  * Some constants used to access the hardware
105  */
106 
107 /* Register offsets and value constans */
108 #define XIRCREG_CR  0	/* Command register (wr) */
109 enum xirc_cr {
110     TransmitPacket = 0x01,
111     SoftReset = 0x02,
112     EnableIntr = 0x04,
113     ForceIntr  = 0x08,
114     ClearTxFIFO = 0x10,
115     ClearRxOvrun = 0x20,
116     RestartTx	 = 0x40
117 };
118 #define XIRCREG_ESR 0	/* Ethernet status register (rd) */
119 enum xirc_esr {
120     FullPktRcvd = 0x01, /* full packet in receive buffer */
121     PktRejected = 0x04, /* a packet has been rejected */
122     TxPktPend = 0x08,	/* TX Packet Pending */
123     IncorPolarity = 0x10,
124     MediaSelect = 0x20	/* set if TP, clear if AUI */
125 };
126 #define XIRCREG_PR  1	/* Page Register select */
127 #define XIRCREG_EDP 4	/* Ethernet Data Port Register */
128 #define XIRCREG_ISR 6	/* Ethernet Interrupt Status Register */
129 enum xirc_isr {
130     TxBufOvr = 0x01,	/* TX Buffer Overflow */
131     PktTxed  = 0x02,	/* Packet Transmitted */
132     MACIntr  = 0x04,	/* MAC Interrupt occurred */
133     TxResGrant = 0x08,	/* Tx Reservation Granted */
134     RxFullPkt = 0x20,	/* Rx Full Packet */
135     RxPktRej  = 0x40,	/* Rx Packet Rejected */
136     ForcedIntr= 0x80	/* Forced Interrupt */
137 };
138 #define XIRCREG1_IMR0 12 /* Ethernet Interrupt Mask Register (on page 1)*/
139 #define XIRCREG1_IMR1 13
140 #define XIRCREG0_TSO  8  /* Transmit Space Open Register (on page 0)*/
141 #define XIRCREG0_TRS  10 /* Transmit reservation Size Register (page 0)*/
142 #define XIRCREG0_DO   12 /* Data Offset Register (page 0) (wr) */
143 #define XIRCREG0_RSR  12 /* Receive Status Register (page 0) (rd) */
144 enum xirc_rsr {
145     PhyPkt = 0x01,	/* set:physical packet, clear: multicast packet */
146     BrdcstPkt = 0x02,	/* set if it is a broadcast packet */
147     PktTooLong = 0x04,	/* set if packet length > 1518 */
148     AlignErr = 0x10,	/* incorrect CRC and last octet not complete */
149     CRCErr = 0x20,	/* incorrect CRC and last octet is complete */
150     PktRxOk = 0x80	/* received ok */
151 };
152 #define XIRCREG0_PTR 13 /* packets transmitted register (rd) */
153 #define XIRCREG0_RBC 14 /* receive byte count regsister (rd) */
154 #define XIRCREG1_ECR 14 /* ethernet configurationn register */
155 enum xirc_ecr {
156     FullDuplex = 0x04,	/* enable full duplex mode */
157     LongTPMode = 0x08,	/* adjust for longer lengths of TP cable */
158     DisablePolCor = 0x10,/* disable auto polarity correction */
159     DisableLinkPulse = 0x20, /* disable link pulse generation */
160     DisableAutoTx = 0x40, /* disable auto-transmit */
161 };
162 #define XIRCREG2_RBS 8	/* receive buffer start register */
163 #define XIRCREG2_LED 10 /* LED Configuration register */
164 /* values for the leds:    Bits 2-0 for led 1
165  *  0 disabled		   Bits 5-3 for led 2
166  *  1 collision
167  *  2 noncollision
168  *  3 link_detected
169  *  4 incor_polarity
170  *  5 jabber
171  *  6 auto_assertion
172  *  7 rx_tx_activity
173  */
174 #define XIRCREG2_MSR 12 /* Mohawk specific register */
175 
176 #define XIRCREG4_GPR0 8 /* General Purpose Register 0 */
177 #define XIRCREG4_GPR1 9 /* General Purpose Register 1 */
178 #define XIRCREG2_GPR2 13 /* General Purpose Register 2 (page2!)*/
179 #define XIRCREG4_BOV 10 /* Bonding Version Register */
180 #define XIRCREG4_LMA 12 /* Local Memory Address Register */
181 #define XIRCREG4_LMD 14 /* Local Memory Data Port */
182 /* MAC register can only by accessed with 8 bit operations */
183 #define XIRCREG40_CMD0 8    /* Command Register (wr) */
184 enum xirc_cmd { 	    /* Commands */
185     Transmit = 0x01,
186     EnableRecv = 0x04,
187     DisableRecv = 0x08,
188     Abort = 0x10,
189     Online = 0x20,
190     IntrAck = 0x40,
191     Offline = 0x80
192 };
193 #define XIRCREG5_RHSA0	10  /* Rx Host Start Address */
194 #define XIRCREG40_RXST0 9   /* Receive Status Register */
195 #define XIRCREG40_TXST0 11  /* Transmit Status Register 0 */
196 #define XIRCREG40_TXST1 12  /* Transmit Status Register 10 */
197 #define XIRCREG40_RMASK0 13  /* Receive Mask Register */
198 #define XIRCREG40_TMASK0 14  /* Transmit Mask Register 0 */
199 #define XIRCREG40_TMASK1 15  /* Transmit Mask Register 0 */
200 #define XIRCREG42_SWC0	8   /* Software Configuration 0 */
201 #define XIRCREG42_SWC1	9   /* Software Configuration 1 */
202 #define XIRCREG42_BOC	10  /* Back-Off Configuration */
203 #define XIRCREG44_TDR0	8   /* Time Domain Reflectometry 0 */
204 #define XIRCREG44_TDR1	9   /* Time Domain Reflectometry 1 */
205 #define XIRCREG44_RXBC_LO 10 /* Rx Byte Count 0 (rd) */
206 #define XIRCREG44_RXBC_HI 11 /* Rx Byte Count 1 (rd) */
207 #define XIRCREG45_REV	 15 /* Revision Register (rd) */
208 #define XIRCREG50_IA	8   /* Individual Address (8-13) */
209 
210 static const char *if_names[] = { "Auto", "10BaseT", "10Base2", "AUI", "100BaseT" };
211 
212 /* card types */
213 #define XIR_UNKNOWN  0	/* unknown: not supported */
214 #define XIR_CE	     1	/* (prodid 1) different hardware: not supported */
215 #define XIR_CE2      2	/* (prodid 2) */
216 #define XIR_CE3      3	/* (prodid 3) */
217 #define XIR_CEM      4	/* (prodid 1) different hardware: not supported */
218 #define XIR_CEM2     5	/* (prodid 2) */
219 #define XIR_CEM3     6	/* (prodid 3) */
220 #define XIR_CEM33    7	/* (prodid 4) */
221 #define XIR_CEM56M   8	/* (prodid 5) */
222 #define XIR_CEM56    9	/* (prodid 6) */
223 #define XIR_CM28    10	/* (prodid 3) modem only: not supported here */
224 #define XIR_CM33    11	/* (prodid 4) modem only: not supported here */
225 #define XIR_CM56    12	/* (prodid 5) modem only: not supported here */
226 #define XIR_CG	    13	/* (prodid 1) GSM modem only: not supported */
227 #define XIR_CBE     14	/* (prodid 1) cardbus ethernet: not supported */
228 /*====================================================================*/
229 
230 /* Module parameters */
231 
232 MODULE_DESCRIPTION("Xircom PCMCIA ethernet driver");
233 MODULE_LICENSE("Dual MPL/GPL");
234 
235 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
236 
237 INT_MODULE_PARM(if_port,	0);
238 INT_MODULE_PARM(full_duplex,	0);
239 INT_MODULE_PARM(do_sound, 	1);
240 INT_MODULE_PARM(lockup_hack,	0);  /* anti lockup hack */
241 
242 /*====================================================================*/
243 
244 /* We do not process more than these number of bytes during one
245  * interrupt. (Of course we receive complete packets, so this is not
246  * an exact value).
247  * Something between 2000..22000; first value gives best interrupt latency,
248  * the second enables the usage of the complete on-chip buffer. We use the
249  * high value as the initial value.
250  */
251 static unsigned maxrx_bytes = 22000;
252 
253 /* MII management prototypes */
254 static void mii_idle(unsigned int ioaddr);
255 static void mii_putbit(unsigned int ioaddr, unsigned data);
256 static int  mii_getbit(unsigned int ioaddr);
257 static void mii_wbits(unsigned int ioaddr, unsigned data, int len);
258 static unsigned mii_rd(unsigned int ioaddr, u_char phyaddr, u_char phyreg);
259 static void mii_wr(unsigned int ioaddr, u_char phyaddr, u_char phyreg,
260 		   unsigned data, int len);
261 
262 static int has_ce2_string(struct pcmcia_device * link);
263 static int xirc2ps_config(struct pcmcia_device * link);
264 static void xirc2ps_release(struct pcmcia_device * link);
265 static void xirc2ps_detach(struct pcmcia_device *p_dev);
266 
267 static irqreturn_t xirc2ps_interrupt(int irq, void *dev_id);
268 
269 struct local_info {
270 	struct net_device	*dev;
271 	struct pcmcia_device	*p_dev;
272 
273     int card_type;
274     int probe_port;
275     int silicon; /* silicon revision. 0=old CE2, 1=Scipper, 4=Mohawk */
276     int mohawk;  /* a CE3 type card */
277     int dingo;	 /* a CEM56 type card */
278     int new_mii; /* has full 10baseT/100baseT MII */
279     int modem;	 /* is a multi function card (i.e with a modem) */
280     void __iomem *dingo_ccr; /* only used for CEM56 cards */
281     unsigned last_ptr_value; /* last packets transmitted value */
282     const char *manf_str;
283     struct work_struct tx_timeout_task;
284 };
285 
286 /****************
287  * Some more prototypes
288  */
289 static netdev_tx_t do_start_xmit(struct sk_buff *skb,
290 				       struct net_device *dev);
291 static void xirc_tx_timeout(struct net_device *dev, unsigned int txqueue);
292 static void xirc2ps_tx_timeout_task(struct work_struct *work);
293 static void set_addresses(struct net_device *dev);
294 static void set_multicast_list(struct net_device *dev);
295 static int set_card_type(struct pcmcia_device *link);
296 static int do_config(struct net_device *dev, struct ifmap *map);
297 static int do_open(struct net_device *dev);
298 static int do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
299 static const struct ethtool_ops netdev_ethtool_ops;
300 static void hardreset(struct net_device *dev);
301 static void do_reset(struct net_device *dev, int full);
302 static int init_mii(struct net_device *dev);
303 static void do_powerdown(struct net_device *dev);
304 static int do_stop(struct net_device *dev);
305 
306 /*=============== Helper functions =========================*/
307 #define SelectPage(pgnr)   outb((pgnr), ioaddr + XIRCREG_PR)
308 #define GetByte(reg)	   ((unsigned)inb(ioaddr + (reg)))
309 #define GetWord(reg)	   ((unsigned)inw(ioaddr + (reg)))
310 #define PutByte(reg,value) outb((value), ioaddr+(reg))
311 #define PutWord(reg,value) outw((value), ioaddr+(reg))
312 
313 /*====== Functions used for debugging =================================*/
314 #if 0 /* reading regs may change system status */
315 static void
316 PrintRegisters(struct net_device *dev)
317 {
318     unsigned int ioaddr = dev->base_addr;
319 
320     if (pc_debug > 1) {
321 	int i, page;
322 
323 	printk(KERN_DEBUG pr_fmt("Register  common: "));
324 	for (i = 0; i < 8; i++)
325 	    pr_cont(" %2.2x", GetByte(i));
326 	pr_cont("\n");
327 	for (page = 0; page <= 8; page++) {
328 	    printk(KERN_DEBUG pr_fmt("Register page %2x: "), page);
329 	    SelectPage(page);
330 	    for (i = 8; i < 16; i++)
331 		pr_cont(" %2.2x", GetByte(i));
332 	    pr_cont("\n");
333 	}
334 	for (page=0x40 ; page <= 0x5f; page++) {
335 		if (page == 0x43 || (page >= 0x46 && page <= 0x4f) ||
336 		    (page >= 0x51 && page <=0x5e))
337 			continue;
338 	    printk(KERN_DEBUG pr_fmt("Register page %2x: "), page);
339 	    SelectPage(page);
340 	    for (i = 8; i < 16; i++)
341 		pr_cont(" %2.2x", GetByte(i));
342 	    pr_cont("\n");
343 	}
344     }
345 }
346 #endif /* 0 */
347 
348 /*============== MII Management functions ===============*/
349 
350 /****************
351  * Turn around for read
352  */
353 static void
mii_idle(unsigned int ioaddr)354 mii_idle(unsigned int ioaddr)
355 {
356     PutByte(XIRCREG2_GPR2, 0x04|0); /* drive MDCK low */
357     udelay(1);
358     PutByte(XIRCREG2_GPR2, 0x04|1); /* and drive MDCK high */
359     udelay(1);
360 }
361 
362 /****************
363  * Write a bit to MDI/O
364  */
365 static void
mii_putbit(unsigned int ioaddr,unsigned data)366 mii_putbit(unsigned int ioaddr, unsigned data)
367 {
368   #if 1
369     if (data) {
370 	PutByte(XIRCREG2_GPR2, 0x0c|2|0); /* set MDIO */
371 	udelay(1);
372 	PutByte(XIRCREG2_GPR2, 0x0c|2|1); /* and drive MDCK high */
373 	udelay(1);
374     } else {
375 	PutByte(XIRCREG2_GPR2, 0x0c|0|0); /* clear MDIO */
376 	udelay(1);
377 	PutByte(XIRCREG2_GPR2, 0x0c|0|1); /* and drive MDCK high */
378 	udelay(1);
379     }
380   #else
381     if (data) {
382 	PutWord(XIRCREG2_GPR2-1, 0x0e0e);
383 	udelay(1);
384 	PutWord(XIRCREG2_GPR2-1, 0x0f0f);
385 	udelay(1);
386     } else {
387 	PutWord(XIRCREG2_GPR2-1, 0x0c0c);
388 	udelay(1);
389 	PutWord(XIRCREG2_GPR2-1, 0x0d0d);
390 	udelay(1);
391     }
392   #endif
393 }
394 
395 /****************
396  * Get a bit from MDI/O
397  */
398 static int
mii_getbit(unsigned int ioaddr)399 mii_getbit(unsigned int ioaddr)
400 {
401     unsigned d;
402 
403     PutByte(XIRCREG2_GPR2, 4|0); /* drive MDCK low */
404     udelay(1);
405     d = GetByte(XIRCREG2_GPR2); /* read MDIO */
406     PutByte(XIRCREG2_GPR2, 4|1); /* drive MDCK high again */
407     udelay(1);
408     return d & 0x20; /* read MDIO */
409 }
410 
411 static void
mii_wbits(unsigned int ioaddr,unsigned data,int len)412 mii_wbits(unsigned int ioaddr, unsigned data, int len)
413 {
414     unsigned m = 1 << (len-1);
415     for (; m; m >>= 1)
416 	mii_putbit(ioaddr, data & m);
417 }
418 
419 static unsigned
mii_rd(unsigned int ioaddr,u_char phyaddr,u_char phyreg)420 mii_rd(unsigned int ioaddr,	u_char phyaddr, u_char phyreg)
421 {
422     int i;
423     unsigned data=0, m;
424 
425     SelectPage(2);
426     for (i=0; i < 32; i++)		/* 32 bit preamble */
427 	mii_putbit(ioaddr, 1);
428     mii_wbits(ioaddr, 0x06, 4); 	/* Start and opcode for read */
429     mii_wbits(ioaddr, phyaddr, 5);	/* PHY address to be accessed */
430     mii_wbits(ioaddr, phyreg, 5);	/* PHY register to read */
431     mii_idle(ioaddr);			/* turn around */
432     mii_getbit(ioaddr);
433 
434     for (m = 1<<15; m; m >>= 1)
435 	if (mii_getbit(ioaddr))
436 	    data |= m;
437     mii_idle(ioaddr);
438     return data;
439 }
440 
441 static void
mii_wr(unsigned int ioaddr,u_char phyaddr,u_char phyreg,unsigned data,int len)442 mii_wr(unsigned int ioaddr, u_char phyaddr, u_char phyreg, unsigned data,
443        int len)
444 {
445     int i;
446 
447     SelectPage(2);
448     for (i=0; i < 32; i++)		/* 32 bit preamble */
449 	mii_putbit(ioaddr, 1);
450     mii_wbits(ioaddr, 0x05, 4); 	/* Start and opcode for write */
451     mii_wbits(ioaddr, phyaddr, 5);	/* PHY address to be accessed */
452     mii_wbits(ioaddr, phyreg, 5);	/* PHY Register to write */
453     mii_putbit(ioaddr, 1);		/* turn around */
454     mii_putbit(ioaddr, 0);
455     mii_wbits(ioaddr, data, len);	/* And write the data */
456     mii_idle(ioaddr);
457 }
458 
459 /*============= Main bulk of functions	=========================*/
460 
461 static const struct net_device_ops netdev_ops = {
462 	.ndo_open		= do_open,
463 	.ndo_stop		= do_stop,
464 	.ndo_start_xmit		= do_start_xmit,
465 	.ndo_tx_timeout 	= xirc_tx_timeout,
466 	.ndo_set_config		= do_config,
467 	.ndo_eth_ioctl		= do_ioctl,
468 	.ndo_set_rx_mode	= set_multicast_list,
469 	.ndo_set_mac_address 	= eth_mac_addr,
470 	.ndo_validate_addr	= eth_validate_addr,
471 };
472 
473 static int
xirc2ps_probe(struct pcmcia_device * link)474 xirc2ps_probe(struct pcmcia_device *link)
475 {
476     struct net_device *dev;
477     struct local_info *local;
478 
479     dev_dbg(&link->dev, "attach()\n");
480 
481     /* Allocate the device structure */
482     dev = alloc_etherdev(sizeof(struct local_info));
483     if (!dev)
484 	    return -ENOMEM;
485     local = netdev_priv(dev);
486     local->dev = dev;
487     local->p_dev = link;
488     link->priv = dev;
489 
490     /* General socket configuration */
491     link->config_index = 1;
492 
493     /* Fill in card specific entries */
494     dev->netdev_ops = &netdev_ops;
495     dev->ethtool_ops = &netdev_ethtool_ops;
496     dev->watchdog_timeo = TX_TIMEOUT;
497     INIT_WORK(&local->tx_timeout_task, xirc2ps_tx_timeout_task);
498 
499     return xirc2ps_config(link);
500 } /* xirc2ps_attach */
501 
502 static void
xirc2ps_detach(struct pcmcia_device * link)503 xirc2ps_detach(struct pcmcia_device *link)
504 {
505     struct net_device *dev = link->priv;
506     struct local_info *local = netdev_priv(dev);
507 
508     netif_carrier_off(dev);
509     netif_tx_disable(dev);
510     cancel_work_sync(&local->tx_timeout_task);
511 
512     dev_dbg(&link->dev, "detach\n");
513 
514     unregister_netdev(dev);
515 
516     xirc2ps_release(link);
517 
518     free_netdev(dev);
519 } /* xirc2ps_detach */
520 
521 /****************
522  * Detect the type of the card. s is the buffer with the data of tuple 0x20
523  * Returns: 0 := not supported
524  *		       mediaid=11 and prodid=47
525  * Media-Id bits:
526  *  Ethernet	    0x01
527  *  Tokenring	    0x02
528  *  Arcnet	    0x04
529  *  Wireless	    0x08
530  *  Modem	    0x10
531  *  GSM only	    0x20
532  * Prod-Id bits:
533  *  Pocket	    0x10
534  *  External	    0x20
535  *  Creditcard	    0x40
536  *  Cardbus	    0x80
537  *
538  */
539 static int
set_card_type(struct pcmcia_device * link)540 set_card_type(struct pcmcia_device *link)
541 {
542     struct net_device *dev = link->priv;
543     struct local_info *local = netdev_priv(dev);
544     u8 *buf;
545     unsigned int cisrev, mediaid, prodid;
546     size_t len;
547 
548     len = pcmcia_get_tuple(link, CISTPL_MANFID, &buf);
549     if (len < 5) {
550 	    dev_err(&link->dev, "invalid CIS -- sorry\n");
551 	    return 0;
552     }
553 
554     cisrev = buf[2];
555     mediaid = buf[3];
556     prodid = buf[4];
557 
558     dev_dbg(&link->dev, "cisrev=%02x mediaid=%02x prodid=%02x\n",
559 	  cisrev, mediaid, prodid);
560 
561     local->mohawk = 0;
562     local->dingo = 0;
563     local->modem = 0;
564     local->card_type = XIR_UNKNOWN;
565     if (!(prodid & 0x40)) {
566 	pr_notice("Oops: Not a creditcard\n");
567 	return 0;
568     }
569     if (!(mediaid & 0x01)) {
570 	pr_notice("Not an Ethernet card\n");
571 	return 0;
572     }
573     if (mediaid & 0x10) {
574 	local->modem = 1;
575 	switch(prodid & 15) {
576 	  case 1: local->card_type = XIR_CEM   ; break;
577 	  case 2: local->card_type = XIR_CEM2  ; break;
578 	  case 3: local->card_type = XIR_CEM3  ; break;
579 	  case 4: local->card_type = XIR_CEM33 ; break;
580 	  case 5: local->card_type = XIR_CEM56M;
581 		  local->mohawk = 1;
582 		  break;
583 	  case 6:
584 	  case 7: /* 7 is the RealPort 10/56 */
585 		  local->card_type = XIR_CEM56 ;
586 		  local->mohawk = 1;
587 		  local->dingo = 1;
588 		  break;
589 	}
590     } else {
591 	switch(prodid & 15) {
592 	  case 1: local->card_type = has_ce2_string(link)? XIR_CE2 : XIR_CE ;
593 		  break;
594 	  case 2: local->card_type = XIR_CE2; break;
595 	  case 3: local->card_type = XIR_CE3;
596 		  local->mohawk = 1;
597 		  break;
598 	}
599     }
600     if (local->card_type == XIR_CE || local->card_type == XIR_CEM) {
601 	pr_notice("Sorry, this is an old CE card\n");
602 	return 0;
603     }
604     if (local->card_type == XIR_UNKNOWN)
605 	pr_notice("unknown card (mediaid=%02x prodid=%02x)\n", mediaid, prodid);
606 
607     return 1;
608 }
609 
610 /****************
611  * There are some CE2 cards out which claim to be a CE card.
612  * This function looks for a "CE2" in the 3rd version field.
613  * Returns: true if this is a CE2
614  */
615 static int
has_ce2_string(struct pcmcia_device * p_dev)616 has_ce2_string(struct pcmcia_device * p_dev)
617 {
618 	if (p_dev->prod_id[2] && strstr(p_dev->prod_id[2], "CE2"))
619 		return 1;
620 	return 0;
621 }
622 
623 static int
xirc2ps_config_modem(struct pcmcia_device * p_dev,void * priv_data)624 xirc2ps_config_modem(struct pcmcia_device *p_dev, void *priv_data)
625 {
626 	unsigned int ioaddr;
627 
628 	if ((p_dev->resource[0]->start & 0xf) == 8)
629 		return -ENODEV;
630 
631 	p_dev->resource[0]->end = 16;
632 	p_dev->resource[1]->end = 8;
633 	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
634 	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
635 	p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
636 	p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
637 	p_dev->io_lines = 10;
638 
639 	p_dev->resource[1]->start = p_dev->resource[0]->start;
640 	for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
641 		p_dev->resource[0]->start = ioaddr;
642 		if (!pcmcia_request_io(p_dev))
643 			return 0;
644 	}
645 	return -ENODEV;
646 }
647 
648 static int
xirc2ps_config_check(struct pcmcia_device * p_dev,void * priv_data)649 xirc2ps_config_check(struct pcmcia_device *p_dev, void *priv_data)
650 {
651 	int *pass = priv_data;
652 	resource_size_t tmp = p_dev->resource[1]->start;
653 
654 	tmp += (*pass ? (p_dev->config_index & 0x20 ? -24 : 8)
655 		: (p_dev->config_index & 0x20 ?   8 : -24));
656 
657 	if ((p_dev->resource[0]->start & 0xf) == 8)
658 		return -ENODEV;
659 
660 	p_dev->resource[0]->end = 18;
661 	p_dev->resource[1]->end = 8;
662 	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
663 	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
664 	p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
665 	p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
666 	p_dev->io_lines = 10;
667 
668 	p_dev->resource[1]->start = p_dev->resource[0]->start;
669 	p_dev->resource[0]->start = tmp;
670 	return pcmcia_request_io(p_dev);
671 }
672 
673 
pcmcia_get_mac_ce(struct pcmcia_device * p_dev,tuple_t * tuple,void * priv)674 static int pcmcia_get_mac_ce(struct pcmcia_device *p_dev,
675 			     tuple_t *tuple,
676 			     void *priv)
677 {
678 	struct net_device *dev = priv;
679 
680 	if (tuple->TupleDataLen != 13)
681 		return -EINVAL;
682 	if ((tuple->TupleData[0] != 2) || (tuple->TupleData[1] != 1) ||
683 		(tuple->TupleData[2] != 6))
684 		return -EINVAL;
685 	/* another try	(James Lehmer's CE2 version 4.1)*/
686 	dev_addr_mod(dev, 2, &tuple->TupleData[2], 4);
687 	return 0;
688 };
689 
690 
691 static int
xirc2ps_config(struct pcmcia_device * link)692 xirc2ps_config(struct pcmcia_device * link)
693 {
694     struct net_device *dev = link->priv;
695     struct local_info *local = netdev_priv(dev);
696     unsigned int ioaddr;
697     int err;
698     u8 *buf;
699     size_t len;
700 
701     local->dingo_ccr = NULL;
702 
703     dev_dbg(&link->dev, "config\n");
704 
705     /* Is this a valid	card */
706     if (link->has_manf_id == 0) {
707 	pr_notice("manfid not found in CIS\n");
708 	goto failure;
709     }
710 
711     switch (link->manf_id) {
712       case MANFID_XIRCOM:
713 	local->manf_str = "Xircom";
714 	break;
715       case MANFID_ACCTON:
716 	local->manf_str = "Accton";
717 	break;
718       case MANFID_COMPAQ:
719       case MANFID_COMPAQ2:
720 	local->manf_str = "Compaq";
721 	break;
722       case MANFID_INTEL:
723 	local->manf_str = "Intel";
724 	break;
725       case MANFID_TOSHIBA:
726 	local->manf_str = "Toshiba";
727 	break;
728       default:
729 	pr_notice("Unknown Card Manufacturer ID: 0x%04x\n",
730 		  (unsigned)link->manf_id);
731 	goto failure;
732     }
733     dev_dbg(&link->dev, "found %s card\n", local->manf_str);
734 
735     if (!set_card_type(link)) {
736 	pr_notice("this card is not supported\n");
737 	goto failure;
738     }
739 
740     /* get the ethernet address from the CIS */
741     err = pcmcia_get_mac_from_cis(link, dev);
742 
743     /* not found: try to get the node-id from tuple 0x89 */
744     if (err) {
745 	    len = pcmcia_get_tuple(link, 0x89, &buf);
746 	    /* data layout looks like tuple 0x22 */
747 	    if (buf && len == 8) {
748 		    if (*buf == CISTPL_FUNCE_LAN_NODE_ID)
749 			    dev_addr_mod(dev, 2, &buf[2], 4);
750 		    else
751 			    err = -1;
752 	    }
753 	    kfree(buf);
754     }
755 
756     if (err)
757 	err = pcmcia_loop_tuple(link, CISTPL_FUNCE, pcmcia_get_mac_ce, dev);
758 
759     if (err) {
760 	pr_notice("node-id not found in CIS\n");
761 	goto failure;
762     }
763 
764     if (local->modem) {
765 	int pass;
766 	link->config_flags |= CONF_AUTO_SET_IO;
767 
768 	if (local->dingo) {
769 	    /* Take the Modem IO port from the CIS and scan for a free
770 	     * Ethernet port */
771 	    if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL))
772 		    goto port_found;
773 	} else {
774 	    /* We do 2 passes here: The first one uses the regular mapping and
775 	     * the second tries again, thereby considering that the 32 ports are
776 	     * mirrored every 32 bytes. Actually we use a mirrored port for
777 	     * the Mako if (on the first pass) the COR bit 5 is set.
778 	     */
779 	    for (pass=0; pass < 2; pass++)
780 		    if (!pcmcia_loop_config(link, xirc2ps_config_check,
781 						    &pass))
782 			    goto port_found;
783 	    /* if special option:
784 	     * try to configure as Ethernet only.
785 	     * .... */
786 	}
787 	pr_notice("no ports available\n");
788     } else {
789 	link->io_lines = 10;
790 	link->resource[0]->end = 16;
791 	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
792 	for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
793 	    link->resource[0]->start = ioaddr;
794 	    if (!(err = pcmcia_request_io(link)))
795 		goto port_found;
796 	}
797 	link->resource[0]->start = 0; /* let CS decide */
798 	if ((err = pcmcia_request_io(link)))
799 	    goto config_error;
800     }
801   port_found:
802 
803     /****************
804      * Now allocate an interrupt line.	Note that this does not
805      * actually assign a handler to the interrupt.
806      */
807     if ((err=pcmcia_request_irq(link, xirc2ps_interrupt)))
808 	goto config_error;
809 
810     link->config_flags |= CONF_ENABLE_IRQ;
811     if (do_sound)
812 	    link->config_flags |= CONF_ENABLE_SPKR;
813 
814     if ((err = pcmcia_enable_device(link)))
815 	goto config_error;
816 
817     if (local->dingo) {
818 	/* Reset the modem's BAR to the correct value
819 	 * This is necessary because in the RequestConfiguration call,
820 	 * the base address of the ethernet port (BasePort1) is written
821 	 * to the BAR registers of the modem.
822 	 */
823 	err = pcmcia_write_config_byte(link, CISREG_IOBASE_0, (u8)
824 				link->resource[1]->start & 0xff);
825 	if (err)
826 	    goto config_error;
827 
828 	err = pcmcia_write_config_byte(link, CISREG_IOBASE_1,
829 				(link->resource[1]->start >> 8) & 0xff);
830 	if (err)
831 	    goto config_error;
832 
833 	/* There is no config entry for the Ethernet part which
834 	 * is at 0x0800. So we allocate a window into the attribute
835 	 * memory and write direct to the CIS registers
836 	 */
837 	link->resource[2]->flags = WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_AM |
838 					WIN_ENABLE;
839 	link->resource[2]->start = link->resource[2]->end = 0;
840 	if ((err = pcmcia_request_window(link, link->resource[2], 0)))
841 	    goto config_error;
842 
843 	local->dingo_ccr = ioremap(link->resource[2]->start, 0x1000) + 0x0800;
844 	if ((err = pcmcia_map_mem_page(link, link->resource[2], 0)))
845 	    goto config_error;
846 
847 	/* Setup the CCRs; there are no infos in the CIS about the Ethernet
848 	 * part.
849 	 */
850 	writeb(0x47, local->dingo_ccr + CISREG_COR);
851 	ioaddr = link->resource[0]->start;
852 	writeb(ioaddr & 0xff	  , local->dingo_ccr + CISREG_IOBASE_0);
853 	writeb((ioaddr >> 8)&0xff , local->dingo_ccr + CISREG_IOBASE_1);
854 
855       #if 0
856 	{
857 	    u_char tmp;
858 	    pr_info("ECOR:");
859 	    for (i=0; i < 7; i++) {
860 		tmp = readb(local->dingo_ccr + i*2);
861 		pr_cont(" %02x", tmp);
862 	    }
863 	    pr_cont("\n");
864 	    pr_info("DCOR:");
865 	    for (i=0; i < 4; i++) {
866 		tmp = readb(local->dingo_ccr + 0x20 + i*2);
867 		pr_cont(" %02x", tmp);
868 	    }
869 	    pr_cont("\n");
870 	    pr_info("SCOR:");
871 	    for (i=0; i < 10; i++) {
872 		tmp = readb(local->dingo_ccr + 0x40 + i*2);
873 		pr_cont(" %02x", tmp);
874 	    }
875 	    pr_cont("\n");
876 	}
877       #endif
878 
879 	writeb(0x01, local->dingo_ccr + 0x20);
880 	writeb(0x0c, local->dingo_ccr + 0x22);
881 	writeb(0x00, local->dingo_ccr + 0x24);
882 	writeb(0x00, local->dingo_ccr + 0x26);
883 	writeb(0x00, local->dingo_ccr + 0x28);
884     }
885 
886     /* The if_port symbol can be set when the module is loaded */
887     local->probe_port=0;
888     if (!if_port) {
889 	local->probe_port = dev->if_port = 1;
890     } else if ((if_port >= 1 && if_port <= 2) ||
891 	       (local->mohawk && if_port==4))
892 	dev->if_port = if_port;
893     else
894 	pr_notice("invalid if_port requested\n");
895 
896     /* we can now register the device with the net subsystem */
897     dev->irq = link->irq;
898     dev->base_addr = link->resource[0]->start;
899 
900     if (local->dingo)
901 	do_reset(dev, 1); /* a kludge to make the cem56 work */
902 
903     SET_NETDEV_DEV(dev, &link->dev);
904 
905     if ((err=register_netdev(dev))) {
906 	pr_notice("register_netdev() failed\n");
907 	goto config_error;
908     }
909 
910     /* give some infos about the hardware */
911     netdev_info(dev, "%s: port %#3lx, irq %d, hwaddr %pM\n",
912 		local->manf_str, (u_long)dev->base_addr, (int)dev->irq,
913 		dev->dev_addr);
914 
915     return 0;
916 
917   config_error:
918     xirc2ps_release(link);
919     return -ENODEV;
920 
921   failure:
922     return -ENODEV;
923 } /* xirc2ps_config */
924 
925 static void
xirc2ps_release(struct pcmcia_device * link)926 xirc2ps_release(struct pcmcia_device *link)
927 {
928 	dev_dbg(&link->dev, "release\n");
929 
930 	if (link->resource[2]->end) {
931 		struct net_device *dev = link->priv;
932 		struct local_info *local = netdev_priv(dev);
933 		if (local->dingo)
934 			iounmap(local->dingo_ccr - 0x0800);
935 	}
936 	pcmcia_disable_device(link);
937 } /* xirc2ps_release */
938 
939 /*====================================================================*/
940 
941 
xirc2ps_suspend(struct pcmcia_device * link)942 static int xirc2ps_suspend(struct pcmcia_device *link)
943 {
944 	struct net_device *dev = link->priv;
945 
946 	if (link->open) {
947 		netif_device_detach(dev);
948 		do_powerdown(dev);
949 	}
950 
951 	return 0;
952 }
953 
xirc2ps_resume(struct pcmcia_device * link)954 static int xirc2ps_resume(struct pcmcia_device *link)
955 {
956 	struct net_device *dev = link->priv;
957 
958 	if (link->open) {
959 		do_reset(dev,1);
960 		netif_device_attach(dev);
961 	}
962 
963 	return 0;
964 }
965 
966 
967 /*====================================================================*/
968 
969 /****************
970  * This is the Interrupt service route.
971  */
972 static irqreturn_t
xirc2ps_interrupt(int irq,void * dev_id)973 xirc2ps_interrupt(int irq, void *dev_id)
974 {
975     struct net_device *dev = (struct net_device *)dev_id;
976     struct local_info *lp = netdev_priv(dev);
977     unsigned int ioaddr;
978     u_char saved_page;
979     unsigned bytes_rcvd;
980     unsigned int_status, eth_status, rx_status, tx_status;
981     unsigned rsr, pktlen;
982     ulong start_ticks = jiffies; /* fixme: jiffies rollover every 497 days
983 				  * is this something to worry about?
984 				  * -- on a laptop?
985 				  */
986 
987     if (!netif_device_present(dev))
988 	return IRQ_HANDLED;
989 
990     ioaddr = dev->base_addr;
991     if (lp->mohawk) { /* must disable the interrupt */
992 	PutByte(XIRCREG_CR, 0);
993     }
994 
995     pr_debug("%s: interrupt %d at %#x.\n", dev->name, irq, ioaddr);
996 
997     saved_page = GetByte(XIRCREG_PR);
998     /* Read the ISR to see whats the cause for the interrupt.
999      * This also clears the interrupt flags on CE2 cards
1000      */
1001     int_status = GetByte(XIRCREG_ISR);
1002     bytes_rcvd = 0;
1003   loop_entry:
1004     if (int_status == 0xff) { /* card may be ejected */
1005 	pr_debug("%s: interrupt %d for dead card\n", dev->name, irq);
1006 	goto leave;
1007     }
1008     eth_status = GetByte(XIRCREG_ESR);
1009 
1010     SelectPage(0x40);
1011     rx_status  = GetByte(XIRCREG40_RXST0);
1012     PutByte(XIRCREG40_RXST0, (~rx_status & 0xff));
1013     tx_status = GetByte(XIRCREG40_TXST0);
1014     tx_status |= GetByte(XIRCREG40_TXST1) << 8;
1015     PutByte(XIRCREG40_TXST0, 0);
1016     PutByte(XIRCREG40_TXST1, 0);
1017 
1018     pr_debug("%s: ISR=%#2.2x ESR=%#2.2x RSR=%#2.2x TSR=%#4.4x\n",
1019 	  dev->name, int_status, eth_status, rx_status, tx_status);
1020 
1021     /***** receive section ******/
1022     SelectPage(0);
1023     while (eth_status & FullPktRcvd) {
1024 	rsr = GetByte(XIRCREG0_RSR);
1025 	if (bytes_rcvd > maxrx_bytes && (rsr & PktRxOk)) {
1026 	    /* too many bytes received during this int, drop the rest of the
1027 	     * packets */
1028 	    dev->stats.rx_dropped++;
1029 	    pr_debug("%s: RX drop, too much done\n", dev->name);
1030 	} else if (rsr & PktRxOk) {
1031 	    struct sk_buff *skb;
1032 
1033 	    pktlen = GetWord(XIRCREG0_RBC);
1034 	    bytes_rcvd += pktlen;
1035 
1036 	    pr_debug("rsr=%#02x packet_length=%u\n", rsr, pktlen);
1037 
1038 	    /* 1 extra so we can use insw */
1039 	    skb = netdev_alloc_skb(dev, pktlen + 3);
1040 	    if (!skb) {
1041 		dev->stats.rx_dropped++;
1042 	    } else { /* okay get the packet */
1043 		skb_reserve(skb, 2);
1044 		if (lp->silicon == 0 ) { /* work around a hardware bug */
1045 		    unsigned rhsa; /* receive start address */
1046 
1047 		    SelectPage(5);
1048 		    rhsa = GetWord(XIRCREG5_RHSA0);
1049 		    SelectPage(0);
1050 		    rhsa += 3; /* skip control infos */
1051 		    if (rhsa >= 0x8000)
1052 			rhsa = 0;
1053 		    if (rhsa + pktlen > 0x8000) {
1054 			unsigned i;
1055 			u_char *buf = skb_put(skb, pktlen);
1056 			for (i=0; i < pktlen ; i++, rhsa++) {
1057 			    buf[i] = GetByte(XIRCREG_EDP);
1058 			    if (rhsa == 0x8000) {
1059 				rhsa = 0;
1060 				i--;
1061 			    }
1062 			}
1063 		    } else {
1064 			insw(ioaddr+XIRCREG_EDP,
1065 				skb_put(skb, pktlen), (pktlen+1)>>1);
1066 		    }
1067 		}
1068 	      #if 0
1069 		else if (lp->mohawk) {
1070 		    /* To use this 32 bit access we should use
1071 		     * a manual optimized loop
1072 		     * Also the words are swapped, we can get more
1073 		     * performance by using 32 bit access and swapping
1074 		     * the words in a register. Will need this for cardbus
1075 		     *
1076 		     * Note: don't forget to change the ALLOC_SKB to .. +3
1077 		     */
1078 		    unsigned i;
1079 		    u_long *p = skb_put(skb, pktlen);
1080 		    register u_long a;
1081 		    unsigned int edpreg = ioaddr+XIRCREG_EDP-2;
1082 		    for (i=0; i < len ; i += 4, p++) {
1083 			a = inl(edpreg);
1084 			__asm__("rorl $16,%0\n\t"
1085 				:"=q" (a)
1086 				: "0" (a));
1087 			*p = a;
1088 		    }
1089 		}
1090 	      #endif
1091 		else {
1092 		    insw(ioaddr+XIRCREG_EDP, skb_put(skb, pktlen),
1093 			    (pktlen+1)>>1);
1094 		}
1095 		skb->protocol = eth_type_trans(skb, dev);
1096 		netif_rx(skb);
1097 		dev->stats.rx_packets++;
1098 		dev->stats.rx_bytes += pktlen;
1099 		if (!(rsr & PhyPkt))
1100 		    dev->stats.multicast++;
1101 	    }
1102 	} else { /* bad packet */
1103 	    pr_debug("rsr=%#02x\n", rsr);
1104 	}
1105 	if (rsr & PktTooLong) {
1106 	    dev->stats.rx_frame_errors++;
1107 	    pr_debug("%s: Packet too long\n", dev->name);
1108 	}
1109 	if (rsr & CRCErr) {
1110 	    dev->stats.rx_crc_errors++;
1111 	    pr_debug("%s: CRC error\n", dev->name);
1112 	}
1113 	if (rsr & AlignErr) {
1114 	    dev->stats.rx_fifo_errors++; /* okay ? */
1115 	    pr_debug("%s: Alignment error\n", dev->name);
1116 	}
1117 
1118 	/* clear the received/dropped/error packet */
1119 	PutWord(XIRCREG0_DO, 0x8000); /* issue cmd: skip_rx_packet */
1120 
1121 	/* get the new ethernet status */
1122 	eth_status = GetByte(XIRCREG_ESR);
1123     }
1124     if (rx_status & 0x10) { /* Receive overrun */
1125 	dev->stats.rx_over_errors++;
1126 	PutByte(XIRCREG_CR, ClearRxOvrun);
1127 	pr_debug("receive overrun cleared\n");
1128     }
1129 
1130     /***** transmit section ******/
1131     if (int_status & PktTxed) {
1132 	unsigned n, nn;
1133 
1134 	n = lp->last_ptr_value;
1135 	nn = GetByte(XIRCREG0_PTR);
1136 	lp->last_ptr_value = nn;
1137 	if (nn < n) /* rollover */
1138 	    dev->stats.tx_packets += 256 - n;
1139 	else if (n == nn) { /* happens sometimes - don't know why */
1140 	    pr_debug("PTR not changed?\n");
1141 	} else
1142 	    dev->stats.tx_packets += lp->last_ptr_value - n;
1143 	netif_wake_queue(dev);
1144     }
1145     if (tx_status & 0x0002) {	/* Excessive collisions */
1146 	pr_debug("tx restarted due to excessive collisions\n");
1147 	PutByte(XIRCREG_CR, RestartTx);  /* restart transmitter process */
1148     }
1149     if (tx_status & 0x0040)
1150 	dev->stats.tx_aborted_errors++;
1151 
1152     /* recalculate our work chunk so that we limit the duration of this
1153      * ISR to about 1/10 of a second.
1154      * Calculate only if we received a reasonable amount of bytes.
1155      */
1156     if (bytes_rcvd > 1000) {
1157 	u_long duration = jiffies - start_ticks;
1158 
1159 	if (duration >= HZ/10) { /* if more than about 1/10 second */
1160 	    maxrx_bytes = (bytes_rcvd * (HZ/10)) / duration;
1161 	    if (maxrx_bytes < 2000)
1162 		maxrx_bytes = 2000;
1163 	    else if (maxrx_bytes > 22000)
1164 		maxrx_bytes = 22000;
1165 	    pr_debug("set maxrx=%u (rcvd=%u ticks=%lu)\n",
1166 		  maxrx_bytes, bytes_rcvd, duration);
1167 	} else if (!duration && maxrx_bytes < 22000) {
1168 	    /* now much faster */
1169 	    maxrx_bytes += 2000;
1170 	    if (maxrx_bytes > 22000)
1171 		maxrx_bytes = 22000;
1172 	    pr_debug("set maxrx=%u\n", maxrx_bytes);
1173 	}
1174     }
1175 
1176   leave:
1177     if (lockup_hack) {
1178 	if (int_status != 0xff && (int_status = GetByte(XIRCREG_ISR)) != 0)
1179 	    goto loop_entry;
1180     }
1181     SelectPage(saved_page);
1182     PutByte(XIRCREG_CR, EnableIntr);  /* re-enable interrupts */
1183     /* Instead of dropping packets during a receive, we could
1184      * force an interrupt with this command:
1185      *	  PutByte(XIRCREG_CR, EnableIntr|ForceIntr);
1186      */
1187     return IRQ_HANDLED;
1188 } /* xirc2ps_interrupt */
1189 
1190 /*====================================================================*/
1191 
1192 static void
xirc2ps_tx_timeout_task(struct work_struct * work)1193 xirc2ps_tx_timeout_task(struct work_struct *work)
1194 {
1195 	struct local_info *local =
1196 		container_of(work, struct local_info, tx_timeout_task);
1197 	struct net_device *dev = local->dev;
1198     /* reset the card */
1199     do_reset(dev,1);
1200     netif_trans_update(dev); /* prevent tx timeout */
1201     netif_wake_queue(dev);
1202 }
1203 
1204 static void
xirc_tx_timeout(struct net_device * dev,unsigned int txqueue)1205 xirc_tx_timeout(struct net_device *dev, unsigned int txqueue)
1206 {
1207     struct local_info *lp = netdev_priv(dev);
1208     dev->stats.tx_errors++;
1209     netdev_notice(dev, "transmit timed out\n");
1210     schedule_work(&lp->tx_timeout_task);
1211 }
1212 
1213 static netdev_tx_t
do_start_xmit(struct sk_buff * skb,struct net_device * dev)1214 do_start_xmit(struct sk_buff *skb, struct net_device *dev)
1215 {
1216     struct local_info *lp = netdev_priv(dev);
1217     unsigned int ioaddr = dev->base_addr;
1218     int okay;
1219     unsigned freespace;
1220     unsigned pktlen = skb->len;
1221 
1222     pr_debug("do_start_xmit(skb=%p, dev=%p) len=%u\n",
1223 	  skb, dev, pktlen);
1224 
1225 
1226     /* adjust the packet length to min. required
1227      * and hope that the buffer is large enough
1228      * to provide some random data.
1229      * fixme: For Mohawk we can change this by sending
1230      * a larger packetlen than we actually have; the chip will
1231      * pad this in his buffer with random bytes
1232      */
1233     if (pktlen < ETH_ZLEN)
1234     {
1235         if (skb_padto(skb, ETH_ZLEN))
1236 		return NETDEV_TX_OK;
1237 	pktlen = ETH_ZLEN;
1238     }
1239 
1240     netif_stop_queue(dev);
1241     SelectPage(0);
1242     PutWord(XIRCREG0_TRS, (u_short)pktlen+2);
1243     freespace = GetWord(XIRCREG0_TSO);
1244     okay = freespace & 0x8000;
1245     freespace &= 0x7fff;
1246     /* TRS doesn't work - (indeed it is eliminated with sil-rev 1) */
1247     okay = pktlen +2 < freespace;
1248     pr_debug("%s: avail. tx space=%u%s\n",
1249 	  dev->name, freespace, okay ? " (okay)":" (not enough)");
1250     if (!okay) { /* not enough space */
1251 	return NETDEV_TX_BUSY;  /* upper layer may decide to requeue this packet */
1252     }
1253     /* send the packet */
1254     PutWord(XIRCREG_EDP, (u_short)pktlen);
1255     outsw(ioaddr+XIRCREG_EDP, skb->data, pktlen>>1);
1256     if (pktlen & 1)
1257 	PutByte(XIRCREG_EDP, skb->data[pktlen-1]);
1258 
1259     if (lp->mohawk)
1260 	PutByte(XIRCREG_CR, TransmitPacket|EnableIntr);
1261 
1262     dev_kfree_skb (skb);
1263     dev->stats.tx_bytes += pktlen;
1264     netif_start_queue(dev);
1265     return NETDEV_TX_OK;
1266 }
1267 
1268 struct set_address_info {
1269 	int reg_nr;
1270 	int page_nr;
1271 	int mohawk;
1272 	unsigned int ioaddr;
1273 };
1274 
set_address(struct set_address_info * sa_info,const char * addr)1275 static void set_address(struct set_address_info *sa_info, const char *addr)
1276 {
1277 	unsigned int ioaddr = sa_info->ioaddr;
1278 	int i;
1279 
1280 	for (i = 0; i < 6; i++) {
1281 		if (sa_info->reg_nr > 15) {
1282 			sa_info->reg_nr = 8;
1283 			sa_info->page_nr++;
1284 			SelectPage(sa_info->page_nr);
1285 		}
1286 		if (sa_info->mohawk)
1287 			PutByte(sa_info->reg_nr++, addr[5 - i]);
1288 		else
1289 			PutByte(sa_info->reg_nr++, addr[i]);
1290 	}
1291 }
1292 
1293 /****************
1294  * Set all addresses: This first one is the individual address,
1295  * the next 9 addresses are taken from the multicast list and
1296  * the rest is filled with the individual address.
1297  */
set_addresses(struct net_device * dev)1298 static void set_addresses(struct net_device *dev)
1299 {
1300 	unsigned int ioaddr = dev->base_addr;
1301 	struct local_info *lp = netdev_priv(dev);
1302 	struct netdev_hw_addr *ha;
1303 	struct set_address_info sa_info;
1304 	int i;
1305 
1306 	/*
1307 	 * Setup the info structure so that by first set_address call it will do
1308 	 * SelectPage with the right page number. Hence these ones here.
1309 	 */
1310 	sa_info.reg_nr = 15 + 1;
1311 	sa_info.page_nr = 0x50 - 1;
1312 	sa_info.mohawk = lp->mohawk;
1313 	sa_info.ioaddr = ioaddr;
1314 
1315 	set_address(&sa_info, dev->dev_addr);
1316 	i = 0;
1317 	netdev_for_each_mc_addr(ha, dev) {
1318 		if (i++ == 9)
1319 			break;
1320 		set_address(&sa_info, ha->addr);
1321 	}
1322 	while (i++ < 9)
1323 		set_address(&sa_info, dev->dev_addr);
1324 	SelectPage(0);
1325 }
1326 
1327 /****************
1328  * Set or clear the multicast filter for this adaptor.
1329  * We can filter up to 9 addresses, if more are requested we set
1330  * multicast promiscuous mode.
1331  */
1332 
1333 static void
set_multicast_list(struct net_device * dev)1334 set_multicast_list(struct net_device *dev)
1335 {
1336     unsigned int ioaddr = dev->base_addr;
1337     unsigned value;
1338 
1339     SelectPage(0x42);
1340     value = GetByte(XIRCREG42_SWC1) & 0xC0;
1341 
1342     if (dev->flags & IFF_PROMISC) { /* snoop */
1343 	PutByte(XIRCREG42_SWC1, value | 0x06); /* set MPE and PME */
1344     } else if (netdev_mc_count(dev) > 9 || (dev->flags & IFF_ALLMULTI)) {
1345 	PutByte(XIRCREG42_SWC1, value | 0x02); /* set MPE */
1346     } else if (!netdev_mc_empty(dev)) {
1347 	/* the chip can filter 9 addresses perfectly */
1348 	PutByte(XIRCREG42_SWC1, value | 0x01);
1349 	SelectPage(0x40);
1350 	PutByte(XIRCREG40_CMD0, Offline);
1351 	set_addresses(dev);
1352 	SelectPage(0x40);
1353 	PutByte(XIRCREG40_CMD0, EnableRecv | Online);
1354     } else { /* standard usage */
1355 	PutByte(XIRCREG42_SWC1, value | 0x00);
1356     }
1357     SelectPage(0);
1358 }
1359 
1360 static int
do_config(struct net_device * dev,struct ifmap * map)1361 do_config(struct net_device *dev, struct ifmap *map)
1362 {
1363     struct local_info *local = netdev_priv(dev);
1364 
1365     pr_debug("do_config(%p)\n", dev);
1366     if (map->port != 255 && map->port != dev->if_port) {
1367 	if (map->port > 4)
1368 	    return -EINVAL;
1369 	if (!map->port) {
1370 	    local->probe_port = 1;
1371 	    dev->if_port = 1;
1372 	} else {
1373 	    local->probe_port = 0;
1374 	    dev->if_port = map->port;
1375 	}
1376 	netdev_info(dev, "switching to %s port\n", if_names[dev->if_port]);
1377 	do_reset(dev,1);  /* not the fine way :-) */
1378     }
1379     return 0;
1380 }
1381 
1382 /****************
1383  * Open the driver
1384  */
1385 static int
do_open(struct net_device * dev)1386 do_open(struct net_device *dev)
1387 {
1388     struct local_info *lp = netdev_priv(dev);
1389     struct pcmcia_device *link = lp->p_dev;
1390 
1391     dev_dbg(&link->dev, "do_open(%p)\n", dev);
1392 
1393     /* Check that the PCMCIA card is still here. */
1394     /* Physical device present signature. */
1395     if (!pcmcia_dev_present(link))
1396 	return -ENODEV;
1397 
1398     /* okay */
1399     link->open++;
1400 
1401     netif_start_queue(dev);
1402     do_reset(dev,1);
1403 
1404     return 0;
1405 }
1406 
netdev_get_drvinfo(struct net_device * dev,struct ethtool_drvinfo * info)1407 static void netdev_get_drvinfo(struct net_device *dev,
1408 			       struct ethtool_drvinfo *info)
1409 {
1410 	strscpy(info->driver, "xirc2ps_cs", sizeof(info->driver));
1411 	snprintf(info->bus_info, sizeof(info->bus_info), "PCMCIA 0x%lx",
1412 		 dev->base_addr);
1413 }
1414 
1415 static const struct ethtool_ops netdev_ethtool_ops = {
1416 	.get_drvinfo		= netdev_get_drvinfo,
1417 };
1418 
1419 static int
do_ioctl(struct net_device * dev,struct ifreq * rq,int cmd)1420 do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
1421 {
1422     struct local_info *local = netdev_priv(dev);
1423     unsigned int ioaddr = dev->base_addr;
1424     struct mii_ioctl_data *data = if_mii(rq);
1425 
1426     pr_debug("%s: ioctl(%-.6s, %#04x) %04x %04x %04x %04x\n",
1427 	  dev->name, rq->ifr_ifrn.ifrn_name, cmd,
1428 	  data->phy_id, data->reg_num, data->val_in, data->val_out);
1429 
1430     if (!local->mohawk)
1431 	return -EOPNOTSUPP;
1432 
1433     switch(cmd) {
1434       case SIOCGMIIPHY:		/* Get the address of the PHY in use. */
1435 	data->phy_id = 0;	/* we have only this address */
1436 	fallthrough;
1437       case SIOCGMIIREG:		/* Read the specified MII register. */
1438 	data->val_out = mii_rd(ioaddr, data->phy_id & 0x1f,
1439 			       data->reg_num & 0x1f);
1440 	break;
1441       case SIOCSMIIREG:		/* Write the specified MII register */
1442 	mii_wr(ioaddr, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in,
1443 	       16);
1444 	break;
1445       default:
1446 	return -EOPNOTSUPP;
1447     }
1448     return 0;
1449 }
1450 
1451 static void
hardreset(struct net_device * dev)1452 hardreset(struct net_device *dev)
1453 {
1454     struct local_info *local = netdev_priv(dev);
1455     unsigned int ioaddr = dev->base_addr;
1456 
1457     SelectPage(4);
1458     udelay(1);
1459     PutByte(XIRCREG4_GPR1, 0);	     /* clear bit 0: power down */
1460     msleep(40);				     /* wait 40 msec */
1461     if (local->mohawk)
1462 	PutByte(XIRCREG4_GPR1, 1);	 /* set bit 0: power up */
1463     else
1464 	PutByte(XIRCREG4_GPR1, 1 | 4);	 /* set bit 0: power up, bit 2: AIC */
1465     msleep(20);			     /* wait 20 msec */
1466 }
1467 
1468 static void
do_reset(struct net_device * dev,int full)1469 do_reset(struct net_device *dev, int full)
1470 {
1471     struct local_info *local = netdev_priv(dev);
1472     unsigned int ioaddr = dev->base_addr;
1473     unsigned value;
1474 
1475     pr_debug("%s: do_reset(%p,%d)\n", dev->name, dev, full);
1476 
1477     hardreset(dev);
1478     PutByte(XIRCREG_CR, SoftReset); /* set */
1479     msleep(20);			     /* wait 20 msec */
1480     PutByte(XIRCREG_CR, 0);	     /* clear */
1481     msleep(40);			     /* wait 40 msec */
1482     if (local->mohawk) {
1483 	SelectPage(4);
1484 	/* set pin GP1 and GP2 to output  (0x0c)
1485 	 * set GP1 to low to power up the ML6692 (0x00)
1486 	 * set GP2 to high to power up the 10Mhz chip  (0x02)
1487 	 */
1488 	PutByte(XIRCREG4_GPR0, 0x0e);
1489     }
1490 
1491     /* give the circuits some time to power up */
1492     msleep(500);			/* about 500ms */
1493 
1494     local->last_ptr_value = 0;
1495     local->silicon = local->mohawk ? (GetByte(XIRCREG4_BOV) & 0x70) >> 4
1496 				   : (GetByte(XIRCREG4_BOV) & 0x30) >> 4;
1497 
1498     if (local->probe_port) {
1499 	if (!local->mohawk) {
1500 	    SelectPage(4);
1501 	    PutByte(XIRCREG4_GPR0, 4);
1502 	    local->probe_port = 0;
1503 	}
1504     } else if (dev->if_port == 2) { /* enable 10Base2 */
1505 	SelectPage(0x42);
1506 	PutByte(XIRCREG42_SWC1, 0xC0);
1507     } else { /* enable 10BaseT */
1508 	SelectPage(0x42);
1509 	PutByte(XIRCREG42_SWC1, 0x80);
1510     }
1511     msleep(40);			     /* wait 40 msec to let it complete */
1512 
1513   #if 0
1514     {
1515 	SelectPage(0);
1516 	value = GetByte(XIRCREG_ESR);	 /* read the ESR */
1517 	pr_debug("%s: ESR is: %#02x\n", dev->name, value);
1518     }
1519   #endif
1520 
1521     /* setup the ECR */
1522     SelectPage(1);
1523     PutByte(XIRCREG1_IMR0, 0xff); /* allow all ints */
1524     PutByte(XIRCREG1_IMR1, 1	); /* and Set TxUnderrunDetect */
1525     value = GetByte(XIRCREG1_ECR);
1526   #if 0
1527     if (local->mohawk)
1528 	value |= DisableLinkPulse;
1529     PutByte(XIRCREG1_ECR, value);
1530   #endif
1531     pr_debug("%s: ECR is: %#02x\n", dev->name, value);
1532 
1533     SelectPage(0x42);
1534     PutByte(XIRCREG42_SWC0, 0x20); /* disable source insertion */
1535 
1536     if (local->silicon != 1) {
1537 	/* set the local memory dividing line.
1538 	 * The comments in the sample code say that this is only
1539 	 * settable with the scipper version 2 which is revision 0.
1540 	 * Always for CE3 cards
1541 	 */
1542 	SelectPage(2);
1543 	PutWord(XIRCREG2_RBS, 0x2000);
1544     }
1545 
1546     if (full)
1547 	set_addresses(dev);
1548 
1549     /* Hardware workaround:
1550      * The receive byte pointer after reset is off by 1 so we need
1551      * to move the offset pointer back to 0.
1552      */
1553     SelectPage(0);
1554     PutWord(XIRCREG0_DO, 0x2000); /* change offset command, off=0 */
1555 
1556     /* setup MAC IMRs and clear status registers */
1557     SelectPage(0x40);		     /* Bit 7 ... bit 0 */
1558     PutByte(XIRCREG40_RMASK0, 0xff); /* ROK, RAB, rsv, RO, CRC, AE, PTL, MP */
1559     PutByte(XIRCREG40_TMASK0, 0xff); /* TOK, TAB, SQE, LL, TU, JAB, EXC, CRS */
1560     PutByte(XIRCREG40_TMASK1, 0xb0); /* rsv, rsv, PTD, EXT, rsv,rsv,rsv, rsv*/
1561     PutByte(XIRCREG40_RXST0,  0x00); /* ROK, RAB, REN, RO, CRC, AE, PTL, MP */
1562     PutByte(XIRCREG40_TXST0,  0x00); /* TOK, TAB, SQE, LL, TU, JAB, EXC, CRS */
1563     PutByte(XIRCREG40_TXST1,  0x00); /* TEN, rsv, PTD, EXT, retry_counter:4  */
1564 
1565     if (full && local->mohawk && init_mii(dev)) {
1566 	if (dev->if_port == 4 || local->dingo || local->new_mii) {
1567 	    netdev_info(dev, "MII selected\n");
1568 	    SelectPage(2);
1569 	    PutByte(XIRCREG2_MSR, GetByte(XIRCREG2_MSR) | 0x08);
1570 	    msleep(20);
1571 	} else {
1572 	    netdev_info(dev, "MII detected; using 10mbs\n");
1573 	    SelectPage(0x42);
1574 	    if (dev->if_port == 2) /* enable 10Base2 */
1575 		PutByte(XIRCREG42_SWC1, 0xC0);
1576 	    else  /* enable 10BaseT */
1577 		PutByte(XIRCREG42_SWC1, 0x80);
1578 	    msleep(40);			/* wait 40 msec to let it complete */
1579 	}
1580 	if (full_duplex)
1581 	    PutByte(XIRCREG1_ECR, GetByte(XIRCREG1_ECR | FullDuplex));
1582     } else {  /* No MII */
1583 	SelectPage(0);
1584 	value = GetByte(XIRCREG_ESR);	 /* read the ESR */
1585 	dev->if_port = (value & MediaSelect) ? 1 : 2;
1586     }
1587 
1588     /* configure the LEDs */
1589     SelectPage(2);
1590     if (dev->if_port == 1 || dev->if_port == 4) /* TP: Link and Activity */
1591 	PutByte(XIRCREG2_LED, 0x3b);
1592     else			      /* Coax: Not-Collision and Activity */
1593 	PutByte(XIRCREG2_LED, 0x3a);
1594 
1595     if (local->dingo)
1596 	PutByte(0x0b, 0x04); /* 100 Mbit LED */
1597 
1598     /* enable receiver and put the mac online */
1599     if (full) {
1600 	set_multicast_list(dev);
1601 	SelectPage(0x40);
1602 	PutByte(XIRCREG40_CMD0, EnableRecv | Online);
1603     }
1604 
1605     /* setup Ethernet IMR and enable interrupts */
1606     SelectPage(1);
1607     PutByte(XIRCREG1_IMR0, 0xff);
1608     udelay(1);
1609     SelectPage(0);
1610     PutByte(XIRCREG_CR, EnableIntr);
1611     if (local->modem && !local->dingo) { /* do some magic */
1612 	if (!(GetByte(0x10) & 0x01))
1613 	    PutByte(0x10, 0x11); /* unmask master-int bit */
1614     }
1615 
1616     if (full)
1617 	netdev_info(dev, "media %s, silicon revision %d\n",
1618 		    if_names[dev->if_port], local->silicon);
1619     /* We should switch back to page 0 to avoid a bug in revision 0
1620      * where regs with offset below 8 can't be read after an access
1621      * to the MAC registers */
1622     SelectPage(0);
1623 }
1624 
1625 /****************
1626  * Initialize the Media-Independent-Interface
1627  * Returns: True if we have a good MII
1628  */
1629 static int
init_mii(struct net_device * dev)1630 init_mii(struct net_device *dev)
1631 {
1632     struct local_info *local = netdev_priv(dev);
1633     unsigned int ioaddr = dev->base_addr;
1634     unsigned control, status, linkpartner;
1635     int i;
1636 
1637     if (if_port == 4 || if_port == 1) { /* force 100BaseT or 10BaseT */
1638 	dev->if_port = if_port;
1639 	local->probe_port = 0;
1640 	return 1;
1641     }
1642 
1643     status = mii_rd(ioaddr,  0, 1);
1644     if ((status & 0xff00) != 0x7800)
1645 	return 0; /* No MII */
1646 
1647     local->new_mii = (mii_rd(ioaddr, 0, 2) != 0xffff);
1648 
1649     if (local->probe_port)
1650 	control = 0x1000; /* auto neg */
1651     else if (dev->if_port == 4)
1652 	control = 0x2000; /* no auto neg, 100mbs mode */
1653     else
1654 	control = 0x0000; /* no auto neg, 10mbs mode */
1655     mii_wr(ioaddr,  0, 0, control, 16);
1656     udelay(100);
1657     control = mii_rd(ioaddr, 0, 0);
1658 
1659     if (control & 0x0400) {
1660 	netdev_notice(dev, "can't take PHY out of isolation mode\n");
1661 	local->probe_port = 0;
1662 	return 0;
1663     }
1664 
1665     if (local->probe_port) {
1666 	/* according to the DP83840A specs the auto negotiation process
1667 	 * may take up to 3.5 sec, so we use this also for our ML6692
1668 	 * Fixme: Better to use a timer here!
1669 	 */
1670 	for (i=0; i < 35; i++) {
1671 	    msleep(100);	 /* wait 100 msec */
1672 	    status = mii_rd(ioaddr,  0, 1);
1673 	    if ((status & 0x0020) && (status & 0x0004))
1674 		break;
1675 	}
1676 
1677 	if (!(status & 0x0020)) {
1678 	    netdev_info(dev, "autonegotiation failed; using 10mbs\n");
1679 	    if (!local->new_mii) {
1680 		control = 0x0000;
1681 		mii_wr(ioaddr,  0, 0, control, 16);
1682 		udelay(100);
1683 		SelectPage(0);
1684 		dev->if_port = (GetByte(XIRCREG_ESR) & MediaSelect) ? 1 : 2;
1685 	    }
1686 	} else {
1687 	    linkpartner = mii_rd(ioaddr, 0, 5);
1688 	    netdev_info(dev, "MII link partner: %04x\n", linkpartner);
1689 	    if (linkpartner & 0x0080) {
1690 		dev->if_port = 4;
1691 	    } else
1692 		dev->if_port = 1;
1693 	}
1694     }
1695 
1696     return 1;
1697 }
1698 
1699 static void
do_powerdown(struct net_device * dev)1700 do_powerdown(struct net_device *dev)
1701 {
1702 
1703     unsigned int ioaddr = dev->base_addr;
1704 
1705     pr_debug("do_powerdown(%p)\n", dev);
1706 
1707     SelectPage(4);
1708     PutByte(XIRCREG4_GPR1, 0);	     /* clear bit 0: power down */
1709     SelectPage(0);
1710 }
1711 
1712 static int
do_stop(struct net_device * dev)1713 do_stop(struct net_device *dev)
1714 {
1715     unsigned int ioaddr = dev->base_addr;
1716     struct local_info *lp = netdev_priv(dev);
1717     struct pcmcia_device *link = lp->p_dev;
1718 
1719     dev_dbg(&link->dev, "do_stop(%p)\n", dev);
1720 
1721     if (!link)
1722 	return -ENODEV;
1723 
1724     netif_stop_queue(dev);
1725 
1726     SelectPage(0);
1727     PutByte(XIRCREG_CR, 0);  /* disable interrupts */
1728     SelectPage(0x01);
1729     PutByte(XIRCREG1_IMR0, 0x00); /* forbid all ints */
1730     SelectPage(4);
1731     PutByte(XIRCREG4_GPR1, 0);	/* clear bit 0: power down */
1732     SelectPage(0);
1733 
1734     link->open--;
1735     return 0;
1736 }
1737 
1738 static const struct pcmcia_device_id xirc2ps_ids[] = {
1739 	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0089, 0x110a),
1740 	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0138, 0x110a),
1741 	PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea),
1742 	PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM33", 0x2e3ee845, 0x80609023),
1743 	PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
1744 	PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
1745 	PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
1746 	PCMCIA_PFC_DEVICE_PROD_ID12(0, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
1747 	PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x010a),
1748 	PCMCIA_DEVICE_PROD_ID13("Toshiba Information Systems", "TPCENET", 0x1b3b94fe, 0xf381c1a2),
1749 	PCMCIA_DEVICE_PROD_ID13("Xircom", "CE3-10/100", 0x2e3ee845, 0x0ec0ac37),
1750 	PCMCIA_DEVICE_PROD_ID13("Xircom", "PS-CE2-10", 0x2e3ee845, 0x947d9073),
1751 	PCMCIA_DEVICE_PROD_ID13("Xircom", "R2E-100BTX", 0x2e3ee845, 0x2464a6e3),
1752 	PCMCIA_DEVICE_PROD_ID13("Xircom", "RE-10", 0x2e3ee845, 0x3e08d609),
1753 	PCMCIA_DEVICE_PROD_ID13("Xircom", "XE2000", 0x2e3ee845, 0xf7188e46),
1754 	PCMCIA_DEVICE_PROD_ID12("Compaq", "Ethernet LAN Card", 0x54f7c49c, 0x9fd2f0a2),
1755 	PCMCIA_DEVICE_PROD_ID12("Compaq", "Netelligent 10/100 PC Card", 0x54f7c49c, 0xefe96769),
1756 	PCMCIA_DEVICE_PROD_ID12("Intel", "EtherExpress(TM) PRO/100 PC Card Mobile Adapter16", 0x816cc815, 0x174397db),
1757 	PCMCIA_DEVICE_PROD_ID12("Toshiba", "10/100 Ethernet PC Card", 0x44a09d9c, 0xb44deecf),
1758 	/* also matches CFE-10 cards! */
1759 	/* PCMCIA_DEVICE_MANF_CARD(0x0105, 0x010a), */
1760 	PCMCIA_DEVICE_NULL,
1761 };
1762 MODULE_DEVICE_TABLE(pcmcia, xirc2ps_ids);
1763 
1764 
1765 static struct pcmcia_driver xirc2ps_cs_driver = {
1766 	.owner		= THIS_MODULE,
1767 	.name		= "xirc2ps_cs",
1768 	.probe		= xirc2ps_probe,
1769 	.remove		= xirc2ps_detach,
1770 	.id_table       = xirc2ps_ids,
1771 	.suspend	= xirc2ps_suspend,
1772 	.resume		= xirc2ps_resume,
1773 };
1774 module_pcmcia_driver(xirc2ps_cs_driver);
1775 
1776 #ifndef MODULE
setup_xirc2ps_cs(char * str)1777 static int __init setup_xirc2ps_cs(char *str)
1778 {
1779 	/* if_port, full_duplex, do_sound, lockup_hack
1780 	 */
1781 	int ints[10] = { -1 };
1782 
1783 	str = get_options(str, ARRAY_SIZE(ints), ints);
1784 
1785 #define MAYBE_SET(X,Y) if (ints[0] >= Y && ints[Y] != -1) { X = ints[Y]; }
1786 	MAYBE_SET(if_port, 3);
1787 	MAYBE_SET(full_duplex, 4);
1788 	MAYBE_SET(do_sound, 5);
1789 	MAYBE_SET(lockup_hack, 6);
1790 #undef  MAYBE_SET
1791 
1792 	return 1;
1793 }
1794 
1795 __setup("xirc2ps_cs=", setup_xirc2ps_cs);
1796 #endif
1797