1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* Xilinx EmacLite Linux driver for the Xilinx Ethernet MAC Lite device. 3 * 4 * This is a new flat driver which is based on the original emac_lite 5 * driver from John Williams <john.williams@xilinx.com>. 6 * 7 * Copyright (c) 2007 - 2013 Xilinx, Inc. 8 */ 9 10 #include <linux/module.h> 11 #include <linux/uaccess.h> 12 #include <linux/netdevice.h> 13 #include <linux/etherdevice.h> 14 #include <linux/skbuff.h> 15 #include <linux/ethtool.h> 16 #include <linux/io.h> 17 #include <linux/slab.h> 18 #include <linux/of_address.h> 19 #include <linux/of_device.h> 20 #include <linux/of_platform.h> 21 #include <linux/of_mdio.h> 22 #include <linux/of_net.h> 23 #include <linux/phy.h> 24 #include <linux/interrupt.h> 25 #include <linux/iopoll.h> 26 27 #define DRIVER_NAME "xilinx_emaclite" 28 29 /* Register offsets for the EmacLite Core */ 30 #define XEL_TXBUFF_OFFSET 0x0 /* Transmit Buffer */ 31 #define XEL_MDIOADDR_OFFSET 0x07E4 /* MDIO Address Register */ 32 #define XEL_MDIOWR_OFFSET 0x07E8 /* MDIO Write Data Register */ 33 #define XEL_MDIORD_OFFSET 0x07EC /* MDIO Read Data Register */ 34 #define XEL_MDIOCTRL_OFFSET 0x07F0 /* MDIO Control Register */ 35 #define XEL_GIER_OFFSET 0x07F8 /* GIE Register */ 36 #define XEL_TSR_OFFSET 0x07FC /* Tx status */ 37 #define XEL_TPLR_OFFSET 0x07F4 /* Tx packet length */ 38 39 #define XEL_RXBUFF_OFFSET 0x1000 /* Receive Buffer */ 40 #define XEL_RPLR_OFFSET 0x100C /* Rx packet length */ 41 #define XEL_RSR_OFFSET 0x17FC /* Rx status */ 42 43 #define XEL_BUFFER_OFFSET 0x0800 /* Next Tx/Rx buffer's offset */ 44 45 /* MDIO Address Register Bit Masks */ 46 #define XEL_MDIOADDR_REGADR_MASK 0x0000001F /* Register Address */ 47 #define XEL_MDIOADDR_PHYADR_MASK 0x000003E0 /* PHY Address */ 48 #define XEL_MDIOADDR_PHYADR_SHIFT 5 49 #define XEL_MDIOADDR_OP_MASK 0x00000400 /* RD/WR Operation */ 50 51 /* MDIO Write Data Register Bit Masks */ 52 #define XEL_MDIOWR_WRDATA_MASK 0x0000FFFF /* Data to be Written */ 53 54 /* MDIO Read Data Register Bit Masks */ 55 #define XEL_MDIORD_RDDATA_MASK 0x0000FFFF /* Data to be Read */ 56 57 /* MDIO Control Register Bit Masks */ 58 #define XEL_MDIOCTRL_MDIOSTS_MASK 0x00000001 /* MDIO Status Mask */ 59 #define XEL_MDIOCTRL_MDIOEN_MASK 0x00000008 /* MDIO Enable */ 60 61 /* Global Interrupt Enable Register (GIER) Bit Masks */ 62 #define XEL_GIER_GIE_MASK 0x80000000 /* Global Enable */ 63 64 /* Transmit Status Register (TSR) Bit Masks */ 65 #define XEL_TSR_XMIT_BUSY_MASK 0x00000001 /* Tx complete */ 66 #define XEL_TSR_PROGRAM_MASK 0x00000002 /* Program the MAC address */ 67 #define XEL_TSR_XMIT_IE_MASK 0x00000008 /* Tx interrupt enable bit */ 68 #define XEL_TSR_XMIT_ACTIVE_MASK 0x80000000 /* Buffer is active, SW bit 69 * only. This is not documented 70 * in the HW spec 71 */ 72 73 /* Define for programming the MAC address into the EmacLite */ 74 #define XEL_TSR_PROG_MAC_ADDR (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_PROGRAM_MASK) 75 76 /* Receive Status Register (RSR) */ 77 #define XEL_RSR_RECV_DONE_MASK 0x00000001 /* Rx complete */ 78 #define XEL_RSR_RECV_IE_MASK 0x00000008 /* Rx interrupt enable bit */ 79 80 /* Transmit Packet Length Register (TPLR) */ 81 #define XEL_TPLR_LENGTH_MASK 0x0000FFFF /* Tx packet length */ 82 83 /* Receive Packet Length Register (RPLR) */ 84 #define XEL_RPLR_LENGTH_MASK 0x0000FFFF /* Rx packet length */ 85 86 #define XEL_HEADER_OFFSET 12 /* Offset to length field */ 87 #define XEL_HEADER_SHIFT 16 /* Shift value for length */ 88 89 /* General Ethernet Definitions */ 90 #define XEL_ARP_PACKET_SIZE 28 /* Max ARP packet size */ 91 #define XEL_HEADER_IP_LENGTH_OFFSET 16 /* IP Length Offset */ 92 93 #define TX_TIMEOUT (60 * HZ) /* Tx timeout is 60 seconds. */ 94 95 #ifdef __BIG_ENDIAN 96 #define xemaclite_readl ioread32be 97 #define xemaclite_writel iowrite32be 98 #else 99 #define xemaclite_readl ioread32 100 #define xemaclite_writel iowrite32 101 #endif 102 103 /** 104 * struct net_local - Our private per device data 105 * @ndev: instance of the network device 106 * @tx_ping_pong: indicates whether Tx Pong buffer is configured in HW 107 * @rx_ping_pong: indicates whether Rx Pong buffer is configured in HW 108 * @next_tx_buf_to_use: next Tx buffer to write to 109 * @next_rx_buf_to_use: next Rx buffer to read from 110 * @base_addr: base address of the Emaclite device 111 * @reset_lock: lock used for synchronization 112 * @deferred_skb: holds an skb (for transmission at a later time) when the 113 * Tx buffer is not free 114 * @phy_dev: pointer to the PHY device 115 * @phy_node: pointer to the PHY device node 116 * @mii_bus: pointer to the MII bus 117 * @last_link: last link status 118 */ 119 struct net_local { 120 struct net_device *ndev; 121 122 bool tx_ping_pong; 123 bool rx_ping_pong; 124 u32 next_tx_buf_to_use; 125 u32 next_rx_buf_to_use; 126 void __iomem *base_addr; 127 128 spinlock_t reset_lock; /* serialize xmit and tx_timeout execution */ 129 struct sk_buff *deferred_skb; 130 131 struct phy_device *phy_dev; 132 struct device_node *phy_node; 133 134 struct mii_bus *mii_bus; 135 136 int last_link; 137 }; 138 139 /*************************/ 140 /* EmacLite driver calls */ 141 /*************************/ 142 143 /** 144 * xemaclite_enable_interrupts - Enable the interrupts for the EmacLite device 145 * @drvdata: Pointer to the Emaclite device private data 146 * 147 * This function enables the Tx and Rx interrupts for the Emaclite device along 148 * with the Global Interrupt Enable. 149 */ 150 static void xemaclite_enable_interrupts(struct net_local *drvdata) 151 { 152 u32 reg_data; 153 154 /* Enable the Tx interrupts for the first Buffer */ 155 reg_data = xemaclite_readl(drvdata->base_addr + XEL_TSR_OFFSET); 156 xemaclite_writel(reg_data | XEL_TSR_XMIT_IE_MASK, 157 drvdata->base_addr + XEL_TSR_OFFSET); 158 159 /* Enable the Rx interrupts for the first buffer */ 160 xemaclite_writel(XEL_RSR_RECV_IE_MASK, drvdata->base_addr + XEL_RSR_OFFSET); 161 162 /* Enable the Global Interrupt Enable */ 163 xemaclite_writel(XEL_GIER_GIE_MASK, drvdata->base_addr + XEL_GIER_OFFSET); 164 } 165 166 /** 167 * xemaclite_disable_interrupts - Disable the interrupts for the EmacLite device 168 * @drvdata: Pointer to the Emaclite device private data 169 * 170 * This function disables the Tx and Rx interrupts for the Emaclite device, 171 * along with the Global Interrupt Enable. 172 */ 173 static void xemaclite_disable_interrupts(struct net_local *drvdata) 174 { 175 u32 reg_data; 176 177 /* Disable the Global Interrupt Enable */ 178 xemaclite_writel(XEL_GIER_GIE_MASK, drvdata->base_addr + XEL_GIER_OFFSET); 179 180 /* Disable the Tx interrupts for the first buffer */ 181 reg_data = xemaclite_readl(drvdata->base_addr + XEL_TSR_OFFSET); 182 xemaclite_writel(reg_data & (~XEL_TSR_XMIT_IE_MASK), 183 drvdata->base_addr + XEL_TSR_OFFSET); 184 185 /* Disable the Rx interrupts for the first buffer */ 186 reg_data = xemaclite_readl(drvdata->base_addr + XEL_RSR_OFFSET); 187 xemaclite_writel(reg_data & (~XEL_RSR_RECV_IE_MASK), 188 drvdata->base_addr + XEL_RSR_OFFSET); 189 } 190 191 /** 192 * xemaclite_aligned_write - Write from 16-bit aligned to 32-bit aligned address 193 * @src_ptr: Void pointer to the 16-bit aligned source address 194 * @dest_ptr: Pointer to the 32-bit aligned destination address 195 * @length: Number bytes to write from source to destination 196 * 197 * This function writes data from a 16-bit aligned buffer to a 32-bit aligned 198 * address in the EmacLite device. 199 */ 200 static void xemaclite_aligned_write(const void *src_ptr, u32 *dest_ptr, 201 unsigned int length) 202 { 203 const u16 *from_u16_ptr; 204 u32 align_buffer; 205 u32 *to_u32_ptr; 206 u16 *to_u16_ptr; 207 208 to_u32_ptr = dest_ptr; 209 from_u16_ptr = src_ptr; 210 align_buffer = 0; 211 212 for (; length > 3; length -= 4) { 213 to_u16_ptr = (u16 *)&align_buffer; 214 *to_u16_ptr++ = *from_u16_ptr++; 215 *to_u16_ptr++ = *from_u16_ptr++; 216 217 /* This barrier resolves occasional issues seen around 218 * cases where the data is not properly flushed out 219 * from the processor store buffers to the destination 220 * memory locations. 221 */ 222 wmb(); 223 224 /* Output a word */ 225 *to_u32_ptr++ = align_buffer; 226 } 227 if (length) { 228 u8 *from_u8_ptr, *to_u8_ptr; 229 230 /* Set up to output the remaining data */ 231 align_buffer = 0; 232 to_u8_ptr = (u8 *)&align_buffer; 233 from_u8_ptr = (u8 *)from_u16_ptr; 234 235 /* Output the remaining data */ 236 for (; length > 0; length--) 237 *to_u8_ptr++ = *from_u8_ptr++; 238 239 /* This barrier resolves occasional issues seen around 240 * cases where the data is not properly flushed out 241 * from the processor store buffers to the destination 242 * memory locations. 243 */ 244 wmb(); 245 *to_u32_ptr = align_buffer; 246 } 247 } 248 249 /** 250 * xemaclite_aligned_read - Read from 32-bit aligned to 16-bit aligned buffer 251 * @src_ptr: Pointer to the 32-bit aligned source address 252 * @dest_ptr: Pointer to the 16-bit aligned destination address 253 * @length: Number bytes to read from source to destination 254 * 255 * This function reads data from a 32-bit aligned address in the EmacLite device 256 * to a 16-bit aligned buffer. 257 */ 258 static void xemaclite_aligned_read(u32 *src_ptr, u8 *dest_ptr, 259 unsigned int length) 260 { 261 u16 *to_u16_ptr, *from_u16_ptr; 262 u32 *from_u32_ptr; 263 u32 align_buffer; 264 265 from_u32_ptr = src_ptr; 266 to_u16_ptr = (u16 *)dest_ptr; 267 268 for (; length > 3; length -= 4) { 269 /* Copy each word into the temporary buffer */ 270 align_buffer = *from_u32_ptr++; 271 from_u16_ptr = (u16 *)&align_buffer; 272 273 /* Read data from source */ 274 *to_u16_ptr++ = *from_u16_ptr++; 275 *to_u16_ptr++ = *from_u16_ptr++; 276 } 277 278 if (length) { 279 u8 *to_u8_ptr, *from_u8_ptr; 280 281 /* Set up to read the remaining data */ 282 to_u8_ptr = (u8 *)to_u16_ptr; 283 align_buffer = *from_u32_ptr++; 284 from_u8_ptr = (u8 *)&align_buffer; 285 286 /* Read the remaining data */ 287 for (; length > 0; length--) 288 *to_u8_ptr = *from_u8_ptr; 289 } 290 } 291 292 /** 293 * xemaclite_send_data - Send an Ethernet frame 294 * @drvdata: Pointer to the Emaclite device private data 295 * @data: Pointer to the data to be sent 296 * @byte_count: Total frame size, including header 297 * 298 * This function checks if the Tx buffer of the Emaclite device is free to send 299 * data. If so, it fills the Tx buffer with data for transmission. Otherwise, it 300 * returns an error. 301 * 302 * Return: 0 upon success or -1 if the buffer(s) are full. 303 * 304 * Note: The maximum Tx packet size can not be more than Ethernet header 305 * (14 Bytes) + Maximum MTU (1500 bytes). This is excluding FCS. 306 */ 307 static int xemaclite_send_data(struct net_local *drvdata, u8 *data, 308 unsigned int byte_count) 309 { 310 u32 reg_data; 311 void __iomem *addr; 312 313 /* Determine the expected Tx buffer address */ 314 addr = drvdata->base_addr + drvdata->next_tx_buf_to_use; 315 316 /* If the length is too large, truncate it */ 317 if (byte_count > ETH_FRAME_LEN) 318 byte_count = ETH_FRAME_LEN; 319 320 /* Check if the expected buffer is available */ 321 reg_data = xemaclite_readl(addr + XEL_TSR_OFFSET); 322 if ((reg_data & (XEL_TSR_XMIT_BUSY_MASK | 323 XEL_TSR_XMIT_ACTIVE_MASK)) == 0) { 324 /* Switch to next buffer if configured */ 325 if (drvdata->tx_ping_pong != 0) 326 drvdata->next_tx_buf_to_use ^= XEL_BUFFER_OFFSET; 327 } else if (drvdata->tx_ping_pong != 0) { 328 /* If the expected buffer is full, try the other buffer, 329 * if it is configured in HW 330 */ 331 332 addr = (void __iomem __force *)((uintptr_t __force)addr ^ 333 XEL_BUFFER_OFFSET); 334 reg_data = xemaclite_readl(addr + XEL_TSR_OFFSET); 335 336 if ((reg_data & (XEL_TSR_XMIT_BUSY_MASK | 337 XEL_TSR_XMIT_ACTIVE_MASK)) != 0) 338 return -1; /* Buffers were full, return failure */ 339 } else { 340 return -1; /* Buffer was full, return failure */ 341 } 342 343 /* Write the frame to the buffer */ 344 xemaclite_aligned_write(data, (u32 __force *)addr, byte_count); 345 346 xemaclite_writel((byte_count & XEL_TPLR_LENGTH_MASK), 347 addr + XEL_TPLR_OFFSET); 348 349 /* Update the Tx Status Register to indicate that there is a 350 * frame to send. Set the XEL_TSR_XMIT_ACTIVE_MASK flag which 351 * is used by the interrupt handler to check whether a frame 352 * has been transmitted 353 */ 354 reg_data = xemaclite_readl(addr + XEL_TSR_OFFSET); 355 reg_data |= (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_XMIT_ACTIVE_MASK); 356 xemaclite_writel(reg_data, addr + XEL_TSR_OFFSET); 357 358 return 0; 359 } 360 361 /** 362 * xemaclite_recv_data - Receive a frame 363 * @drvdata: Pointer to the Emaclite device private data 364 * @data: Address where the data is to be received 365 * @maxlen: Maximum supported ethernet packet length 366 * 367 * This function is intended to be called from the interrupt context or 368 * with a wrapper which waits for the receive frame to be available. 369 * 370 * Return: Total number of bytes received 371 */ 372 static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data, int maxlen) 373 { 374 void __iomem *addr; 375 u16 length, proto_type; 376 u32 reg_data; 377 378 /* Determine the expected buffer address */ 379 addr = (drvdata->base_addr + drvdata->next_rx_buf_to_use); 380 381 /* Verify which buffer has valid data */ 382 reg_data = xemaclite_readl(addr + XEL_RSR_OFFSET); 383 384 if ((reg_data & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) { 385 if (drvdata->rx_ping_pong != 0) 386 drvdata->next_rx_buf_to_use ^= XEL_BUFFER_OFFSET; 387 } else { 388 /* The instance is out of sync, try other buffer if other 389 * buffer is configured, return 0 otherwise. If the instance is 390 * out of sync, do not update the 'next_rx_buf_to_use' since it 391 * will correct on subsequent calls 392 */ 393 if (drvdata->rx_ping_pong != 0) 394 addr = (void __iomem __force *) 395 ((uintptr_t __force)addr ^ 396 XEL_BUFFER_OFFSET); 397 else 398 return 0; /* No data was available */ 399 400 /* Verify that buffer has valid data */ 401 reg_data = xemaclite_readl(addr + XEL_RSR_OFFSET); 402 if ((reg_data & XEL_RSR_RECV_DONE_MASK) != 403 XEL_RSR_RECV_DONE_MASK) 404 return 0; /* No data was available */ 405 } 406 407 /* Get the protocol type of the ethernet frame that arrived 408 */ 409 proto_type = ((ntohl(xemaclite_readl(addr + XEL_HEADER_OFFSET + 410 XEL_RXBUFF_OFFSET)) >> XEL_HEADER_SHIFT) & 411 XEL_RPLR_LENGTH_MASK); 412 413 /* Check if received ethernet frame is a raw ethernet frame 414 * or an IP packet or an ARP packet 415 */ 416 if (proto_type > ETH_DATA_LEN) { 417 if (proto_type == ETH_P_IP) { 418 length = ((ntohl(xemaclite_readl(addr + 419 XEL_HEADER_IP_LENGTH_OFFSET + 420 XEL_RXBUFF_OFFSET)) >> 421 XEL_HEADER_SHIFT) & 422 XEL_RPLR_LENGTH_MASK); 423 length = min_t(u16, length, ETH_DATA_LEN); 424 length += ETH_HLEN + ETH_FCS_LEN; 425 426 } else if (proto_type == ETH_P_ARP) { 427 length = XEL_ARP_PACKET_SIZE + ETH_HLEN + ETH_FCS_LEN; 428 } else { 429 /* Field contains type other than IP or ARP, use max 430 * frame size and let user parse it 431 */ 432 length = ETH_FRAME_LEN + ETH_FCS_LEN; 433 } 434 } else { 435 /* Use the length in the frame, plus the header and trailer */ 436 length = proto_type + ETH_HLEN + ETH_FCS_LEN; 437 } 438 439 if (WARN_ON(length > maxlen)) 440 length = maxlen; 441 442 /* Read from the EmacLite device */ 443 xemaclite_aligned_read((u32 __force *)(addr + XEL_RXBUFF_OFFSET), 444 data, length); 445 446 /* Acknowledge the frame */ 447 reg_data = xemaclite_readl(addr + XEL_RSR_OFFSET); 448 reg_data &= ~XEL_RSR_RECV_DONE_MASK; 449 xemaclite_writel(reg_data, addr + XEL_RSR_OFFSET); 450 451 return length; 452 } 453 454 /** 455 * xemaclite_update_address - Update the MAC address in the device 456 * @drvdata: Pointer to the Emaclite device private data 457 * @address_ptr:Pointer to the MAC address (MAC address is a 48-bit value) 458 * 459 * Tx must be idle and Rx should be idle for deterministic results. 460 * It is recommended that this function should be called after the 461 * initialization and before transmission of any packets from the device. 462 * The MAC address can be programmed using any of the two transmit 463 * buffers (if configured). 464 */ 465 static void xemaclite_update_address(struct net_local *drvdata, 466 const u8 *address_ptr) 467 { 468 void __iomem *addr; 469 u32 reg_data; 470 471 /* Determine the expected Tx buffer address */ 472 addr = drvdata->base_addr + drvdata->next_tx_buf_to_use; 473 474 xemaclite_aligned_write(address_ptr, (u32 __force *)addr, ETH_ALEN); 475 476 xemaclite_writel(ETH_ALEN, addr + XEL_TPLR_OFFSET); 477 478 /* Update the MAC address in the EmacLite */ 479 reg_data = xemaclite_readl(addr + XEL_TSR_OFFSET); 480 xemaclite_writel(reg_data | XEL_TSR_PROG_MAC_ADDR, addr + XEL_TSR_OFFSET); 481 482 /* Wait for EmacLite to finish with the MAC address update */ 483 while ((xemaclite_readl(addr + XEL_TSR_OFFSET) & 484 XEL_TSR_PROG_MAC_ADDR) != 0) 485 ; 486 } 487 488 /** 489 * xemaclite_set_mac_address - Set the MAC address for this device 490 * @dev: Pointer to the network device instance 491 * @address: Void pointer to the sockaddr structure 492 * 493 * This function copies the HW address from the sockaddr structure to the 494 * net_device structure and updates the address in HW. 495 * 496 * Return: Error if the net device is busy or 0 if the addr is set 497 * successfully 498 */ 499 static int xemaclite_set_mac_address(struct net_device *dev, void *address) 500 { 501 struct net_local *lp = netdev_priv(dev); 502 struct sockaddr *addr = address; 503 504 if (netif_running(dev)) 505 return -EBUSY; 506 507 eth_hw_addr_set(dev, addr->sa_data); 508 xemaclite_update_address(lp, dev->dev_addr); 509 return 0; 510 } 511 512 /** 513 * xemaclite_tx_timeout - Callback for Tx Timeout 514 * @dev: Pointer to the network device 515 * @txqueue: Unused 516 * 517 * This function is called when Tx time out occurs for Emaclite device. 518 */ 519 static void xemaclite_tx_timeout(struct net_device *dev, unsigned int txqueue) 520 { 521 struct net_local *lp = netdev_priv(dev); 522 unsigned long flags; 523 524 dev_err(&lp->ndev->dev, "Exceeded transmit timeout of %lu ms\n", 525 TX_TIMEOUT * 1000UL / HZ); 526 527 dev->stats.tx_errors++; 528 529 /* Reset the device */ 530 spin_lock_irqsave(&lp->reset_lock, flags); 531 532 /* Shouldn't really be necessary, but shouldn't hurt */ 533 netif_stop_queue(dev); 534 535 xemaclite_disable_interrupts(lp); 536 xemaclite_enable_interrupts(lp); 537 538 if (lp->deferred_skb) { 539 dev_kfree_skb(lp->deferred_skb); 540 lp->deferred_skb = NULL; 541 dev->stats.tx_errors++; 542 } 543 544 /* To exclude tx timeout */ 545 netif_trans_update(dev); /* prevent tx timeout */ 546 547 /* We're all ready to go. Start the queue */ 548 netif_wake_queue(dev); 549 spin_unlock_irqrestore(&lp->reset_lock, flags); 550 } 551 552 /**********************/ 553 /* Interrupt Handlers */ 554 /**********************/ 555 556 /** 557 * xemaclite_tx_handler - Interrupt handler for frames sent 558 * @dev: Pointer to the network device 559 * 560 * This function updates the number of packets transmitted and handles the 561 * deferred skb, if there is one. 562 */ 563 static void xemaclite_tx_handler(struct net_device *dev) 564 { 565 struct net_local *lp = netdev_priv(dev); 566 567 dev->stats.tx_packets++; 568 569 if (!lp->deferred_skb) 570 return; 571 572 if (xemaclite_send_data(lp, (u8 *)lp->deferred_skb->data, 573 lp->deferred_skb->len)) 574 return; 575 576 dev->stats.tx_bytes += lp->deferred_skb->len; 577 dev_consume_skb_irq(lp->deferred_skb); 578 lp->deferred_skb = NULL; 579 netif_trans_update(dev); /* prevent tx timeout */ 580 netif_wake_queue(dev); 581 } 582 583 /** 584 * xemaclite_rx_handler- Interrupt handler for frames received 585 * @dev: Pointer to the network device 586 * 587 * This function allocates memory for a socket buffer, fills it with data 588 * received and hands it over to the TCP/IP stack. 589 */ 590 static void xemaclite_rx_handler(struct net_device *dev) 591 { 592 struct net_local *lp = netdev_priv(dev); 593 struct sk_buff *skb; 594 u32 len; 595 596 len = ETH_FRAME_LEN + ETH_FCS_LEN; 597 skb = netdev_alloc_skb(dev, len + NET_IP_ALIGN); 598 if (!skb) { 599 /* Couldn't get memory. */ 600 dev->stats.rx_dropped++; 601 dev_err(&lp->ndev->dev, "Could not allocate receive buffer\n"); 602 return; 603 } 604 605 skb_reserve(skb, NET_IP_ALIGN); 606 607 len = xemaclite_recv_data(lp, (u8 *)skb->data, len); 608 609 if (!len) { 610 dev->stats.rx_errors++; 611 dev_kfree_skb_irq(skb); 612 return; 613 } 614 615 skb_put(skb, len); /* Tell the skb how much data we got */ 616 617 skb->protocol = eth_type_trans(skb, dev); 618 skb_checksum_none_assert(skb); 619 620 dev->stats.rx_packets++; 621 dev->stats.rx_bytes += len; 622 623 if (!skb_defer_rx_timestamp(skb)) 624 netif_rx(skb); /* Send the packet upstream */ 625 } 626 627 /** 628 * xemaclite_interrupt - Interrupt handler for this driver 629 * @irq: Irq of the Emaclite device 630 * @dev_id: Void pointer to the network device instance used as callback 631 * reference 632 * 633 * Return: IRQ_HANDLED 634 * 635 * This function handles the Tx and Rx interrupts of the EmacLite device. 636 */ 637 static irqreturn_t xemaclite_interrupt(int irq, void *dev_id) 638 { 639 bool tx_complete = false; 640 struct net_device *dev = dev_id; 641 struct net_local *lp = netdev_priv(dev); 642 void __iomem *base_addr = lp->base_addr; 643 u32 tx_status; 644 645 /* Check if there is Rx Data available */ 646 if ((xemaclite_readl(base_addr + XEL_RSR_OFFSET) & 647 XEL_RSR_RECV_DONE_MASK) || 648 (xemaclite_readl(base_addr + XEL_BUFFER_OFFSET + XEL_RSR_OFFSET) 649 & XEL_RSR_RECV_DONE_MASK)) 650 651 xemaclite_rx_handler(dev); 652 653 /* Check if the Transmission for the first buffer is completed */ 654 tx_status = xemaclite_readl(base_addr + XEL_TSR_OFFSET); 655 if (((tx_status & XEL_TSR_XMIT_BUSY_MASK) == 0) && 656 (tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) { 657 tx_status &= ~XEL_TSR_XMIT_ACTIVE_MASK; 658 xemaclite_writel(tx_status, base_addr + XEL_TSR_OFFSET); 659 660 tx_complete = true; 661 } 662 663 /* Check if the Transmission for the second buffer is completed */ 664 tx_status = xemaclite_readl(base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET); 665 if (((tx_status & XEL_TSR_XMIT_BUSY_MASK) == 0) && 666 (tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) { 667 tx_status &= ~XEL_TSR_XMIT_ACTIVE_MASK; 668 xemaclite_writel(tx_status, base_addr + XEL_BUFFER_OFFSET + 669 XEL_TSR_OFFSET); 670 671 tx_complete = true; 672 } 673 674 /* If there was a Tx interrupt, call the Tx Handler */ 675 if (tx_complete != 0) 676 xemaclite_tx_handler(dev); 677 678 return IRQ_HANDLED; 679 } 680 681 /**********************/ 682 /* MDIO Bus functions */ 683 /**********************/ 684 685 /** 686 * xemaclite_mdio_wait - Wait for the MDIO to be ready to use 687 * @lp: Pointer to the Emaclite device private data 688 * 689 * This function waits till the device is ready to accept a new MDIO 690 * request. 691 * 692 * Return: 0 for success or ETIMEDOUT for a timeout 693 */ 694 695 static int xemaclite_mdio_wait(struct net_local *lp) 696 { 697 u32 val; 698 699 /* wait for the MDIO interface to not be busy or timeout 700 * after some time. 701 */ 702 return readx_poll_timeout(xemaclite_readl, 703 lp->base_addr + XEL_MDIOCTRL_OFFSET, 704 val, !(val & XEL_MDIOCTRL_MDIOSTS_MASK), 705 1000, 20000); 706 } 707 708 /** 709 * xemaclite_mdio_read - Read from a given MII management register 710 * @bus: the mii_bus struct 711 * @phy_id: the phy address 712 * @reg: register number to read from 713 * 714 * This function waits till the device is ready to accept a new MDIO 715 * request and then writes the phy address to the MDIO Address register 716 * and reads data from MDIO Read Data register, when its available. 717 * 718 * Return: Value read from the MII management register 719 */ 720 static int xemaclite_mdio_read(struct mii_bus *bus, int phy_id, int reg) 721 { 722 struct net_local *lp = bus->priv; 723 u32 ctrl_reg; 724 u32 rc; 725 726 if (xemaclite_mdio_wait(lp)) 727 return -ETIMEDOUT; 728 729 /* Write the PHY address, register number and set the OP bit in the 730 * MDIO Address register. Set the Status bit in the MDIO Control 731 * register to start a MDIO read transaction. 732 */ 733 ctrl_reg = xemaclite_readl(lp->base_addr + XEL_MDIOCTRL_OFFSET); 734 xemaclite_writel(XEL_MDIOADDR_OP_MASK | 735 ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg), 736 lp->base_addr + XEL_MDIOADDR_OFFSET); 737 xemaclite_writel(ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK, 738 lp->base_addr + XEL_MDIOCTRL_OFFSET); 739 740 if (xemaclite_mdio_wait(lp)) 741 return -ETIMEDOUT; 742 743 rc = xemaclite_readl(lp->base_addr + XEL_MDIORD_OFFSET); 744 745 dev_dbg(&lp->ndev->dev, 746 "%s(phy_id=%i, reg=%x) == %x\n", __func__, 747 phy_id, reg, rc); 748 749 return rc; 750 } 751 752 /** 753 * xemaclite_mdio_write - Write to a given MII management register 754 * @bus: the mii_bus struct 755 * @phy_id: the phy address 756 * @reg: register number to write to 757 * @val: value to write to the register number specified by reg 758 * 759 * This function waits till the device is ready to accept a new MDIO 760 * request and then writes the val to the MDIO Write Data register. 761 * 762 * Return: 0 upon success or a negative error upon failure 763 */ 764 static int xemaclite_mdio_write(struct mii_bus *bus, int phy_id, int reg, 765 u16 val) 766 { 767 struct net_local *lp = bus->priv; 768 u32 ctrl_reg; 769 770 dev_dbg(&lp->ndev->dev, 771 "%s(phy_id=%i, reg=%x, val=%x)\n", __func__, 772 phy_id, reg, val); 773 774 if (xemaclite_mdio_wait(lp)) 775 return -ETIMEDOUT; 776 777 /* Write the PHY address, register number and clear the OP bit in the 778 * MDIO Address register and then write the value into the MDIO Write 779 * Data register. Finally, set the Status bit in the MDIO Control 780 * register to start a MDIO write transaction. 781 */ 782 ctrl_reg = xemaclite_readl(lp->base_addr + XEL_MDIOCTRL_OFFSET); 783 xemaclite_writel(~XEL_MDIOADDR_OP_MASK & 784 ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg), 785 lp->base_addr + XEL_MDIOADDR_OFFSET); 786 xemaclite_writel(val, lp->base_addr + XEL_MDIOWR_OFFSET); 787 xemaclite_writel(ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK, 788 lp->base_addr + XEL_MDIOCTRL_OFFSET); 789 790 return 0; 791 } 792 793 /** 794 * xemaclite_mdio_setup - Register mii_bus for the Emaclite device 795 * @lp: Pointer to the Emaclite device private data 796 * @dev: Pointer to OF device structure 797 * 798 * This function enables MDIO bus in the Emaclite device and registers a 799 * mii_bus. 800 * 801 * Return: 0 upon success or a negative error upon failure 802 */ 803 static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev) 804 { 805 struct mii_bus *bus; 806 struct resource res; 807 struct device_node *np = of_get_parent(lp->phy_node); 808 struct device_node *npp; 809 int rc, ret; 810 811 /* Don't register the MDIO bus if the phy_node or its parent node 812 * can't be found. 813 */ 814 if (!np) { 815 dev_err(dev, "Failed to register mdio bus.\n"); 816 return -ENODEV; 817 } 818 npp = of_get_parent(np); 819 ret = of_address_to_resource(npp, 0, &res); 820 of_node_put(npp); 821 if (ret) { 822 dev_err(dev, "%s resource error!\n", 823 dev->of_node->full_name); 824 of_node_put(np); 825 return ret; 826 } 827 if (lp->ndev->mem_start != res.start) { 828 struct phy_device *phydev; 829 830 phydev = of_phy_find_device(lp->phy_node); 831 if (!phydev) 832 dev_info(dev, 833 "MDIO of the phy is not registered yet\n"); 834 else 835 put_device(&phydev->mdio.dev); 836 of_node_put(np); 837 return 0; 838 } 839 840 /* Enable the MDIO bus by asserting the enable bit in MDIO Control 841 * register. 842 */ 843 xemaclite_writel(XEL_MDIOCTRL_MDIOEN_MASK, 844 lp->base_addr + XEL_MDIOCTRL_OFFSET); 845 846 bus = mdiobus_alloc(); 847 if (!bus) { 848 dev_err(dev, "Failed to allocate mdiobus\n"); 849 of_node_put(np); 850 return -ENOMEM; 851 } 852 853 snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx", 854 (unsigned long long)res.start); 855 bus->priv = lp; 856 bus->name = "Xilinx Emaclite MDIO"; 857 bus->read = xemaclite_mdio_read; 858 bus->write = xemaclite_mdio_write; 859 bus->parent = dev; 860 861 rc = of_mdiobus_register(bus, np); 862 of_node_put(np); 863 if (rc) { 864 dev_err(dev, "Failed to register mdio bus.\n"); 865 goto err_register; 866 } 867 868 lp->mii_bus = bus; 869 870 return 0; 871 872 err_register: 873 mdiobus_free(bus); 874 return rc; 875 } 876 877 /** 878 * xemaclite_adjust_link - Link state callback for the Emaclite device 879 * @ndev: pointer to net_device struct 880 * 881 * There's nothing in the Emaclite device to be configured when the link 882 * state changes. We just print the status. 883 */ 884 static void xemaclite_adjust_link(struct net_device *ndev) 885 { 886 struct net_local *lp = netdev_priv(ndev); 887 struct phy_device *phy = lp->phy_dev; 888 int link_state; 889 890 /* hash together the state values to decide if something has changed */ 891 link_state = phy->speed | (phy->duplex << 1) | phy->link; 892 893 if (lp->last_link != link_state) { 894 lp->last_link = link_state; 895 phy_print_status(phy); 896 } 897 } 898 899 /** 900 * xemaclite_open - Open the network device 901 * @dev: Pointer to the network device 902 * 903 * This function sets the MAC address, requests an IRQ and enables interrupts 904 * for the Emaclite device and starts the Tx queue. 905 * It also connects to the phy device, if MDIO is included in Emaclite device. 906 * 907 * Return: 0 on success. -ENODEV, if PHY cannot be connected. 908 * Non-zero error value on failure. 909 */ 910 static int xemaclite_open(struct net_device *dev) 911 { 912 struct net_local *lp = netdev_priv(dev); 913 int retval; 914 915 /* Just to be safe, stop the device first */ 916 xemaclite_disable_interrupts(lp); 917 918 if (lp->phy_node) { 919 lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node, 920 xemaclite_adjust_link, 0, 921 PHY_INTERFACE_MODE_MII); 922 if (!lp->phy_dev) { 923 dev_err(&lp->ndev->dev, "of_phy_connect() failed\n"); 924 return -ENODEV; 925 } 926 927 /* EmacLite doesn't support giga-bit speeds */ 928 phy_set_max_speed(lp->phy_dev, SPEED_100); 929 phy_start(lp->phy_dev); 930 } 931 932 /* Set the MAC address each time opened */ 933 xemaclite_update_address(lp, dev->dev_addr); 934 935 /* Grab the IRQ */ 936 retval = request_irq(dev->irq, xemaclite_interrupt, 0, dev->name, dev); 937 if (retval) { 938 dev_err(&lp->ndev->dev, "Could not allocate interrupt %d\n", 939 dev->irq); 940 if (lp->phy_dev) 941 phy_disconnect(lp->phy_dev); 942 lp->phy_dev = NULL; 943 944 return retval; 945 } 946 947 /* Enable Interrupts */ 948 xemaclite_enable_interrupts(lp); 949 950 /* We're ready to go */ 951 netif_start_queue(dev); 952 953 return 0; 954 } 955 956 /** 957 * xemaclite_close - Close the network device 958 * @dev: Pointer to the network device 959 * 960 * This function stops the Tx queue, disables interrupts and frees the IRQ for 961 * the Emaclite device. 962 * It also disconnects the phy device associated with the Emaclite device. 963 * 964 * Return: 0, always. 965 */ 966 static int xemaclite_close(struct net_device *dev) 967 { 968 struct net_local *lp = netdev_priv(dev); 969 970 netif_stop_queue(dev); 971 xemaclite_disable_interrupts(lp); 972 free_irq(dev->irq, dev); 973 974 if (lp->phy_dev) 975 phy_disconnect(lp->phy_dev); 976 lp->phy_dev = NULL; 977 978 return 0; 979 } 980 981 /** 982 * xemaclite_send - Transmit a frame 983 * @orig_skb: Pointer to the socket buffer to be transmitted 984 * @dev: Pointer to the network device 985 * 986 * This function checks if the Tx buffer of the Emaclite device is free to send 987 * data. If so, it fills the Tx buffer with data from socket buffer data, 988 * updates the stats and frees the socket buffer. The Tx completion is signaled 989 * by an interrupt. If the Tx buffer isn't free, then the socket buffer is 990 * deferred and the Tx queue is stopped so that the deferred socket buffer can 991 * be transmitted when the Emaclite device is free to transmit data. 992 * 993 * Return: NETDEV_TX_OK, always. 994 */ 995 static netdev_tx_t 996 xemaclite_send(struct sk_buff *orig_skb, struct net_device *dev) 997 { 998 struct net_local *lp = netdev_priv(dev); 999 struct sk_buff *new_skb; 1000 unsigned int len; 1001 unsigned long flags; 1002 1003 len = orig_skb->len; 1004 1005 new_skb = orig_skb; 1006 1007 spin_lock_irqsave(&lp->reset_lock, flags); 1008 if (xemaclite_send_data(lp, (u8 *)new_skb->data, len) != 0) { 1009 /* If the Emaclite Tx buffer is busy, stop the Tx queue and 1010 * defer the skb for transmission during the ISR, after the 1011 * current transmission is complete 1012 */ 1013 netif_stop_queue(dev); 1014 lp->deferred_skb = new_skb; 1015 /* Take the time stamp now, since we can't do this in an ISR. */ 1016 skb_tx_timestamp(new_skb); 1017 spin_unlock_irqrestore(&lp->reset_lock, flags); 1018 return NETDEV_TX_OK; 1019 } 1020 spin_unlock_irqrestore(&lp->reset_lock, flags); 1021 1022 skb_tx_timestamp(new_skb); 1023 1024 dev->stats.tx_bytes += len; 1025 dev_consume_skb_any(new_skb); 1026 1027 return NETDEV_TX_OK; 1028 } 1029 1030 /** 1031 * get_bool - Get a parameter from the OF device 1032 * @ofdev: Pointer to OF device structure 1033 * @s: Property to be retrieved 1034 * 1035 * This function looks for a property in the device node and returns the value 1036 * of the property if its found or 0 if the property is not found. 1037 * 1038 * Return: Value of the parameter if the parameter is found, or 0 otherwise 1039 */ 1040 static bool get_bool(struct platform_device *ofdev, const char *s) 1041 { 1042 u32 *p = (u32 *)of_get_property(ofdev->dev.of_node, s, NULL); 1043 1044 if (!p) { 1045 dev_warn(&ofdev->dev, "Parameter %s not found, defaulting to false\n", s); 1046 return false; 1047 } 1048 1049 return (bool)*p; 1050 } 1051 1052 /** 1053 * xemaclite_ethtools_get_drvinfo - Get various Axi Emac Lite driver info 1054 * @ndev: Pointer to net_device structure 1055 * @ed: Pointer to ethtool_drvinfo structure 1056 * 1057 * This implements ethtool command for getting the driver information. 1058 * Issue "ethtool -i ethX" under linux prompt to execute this function. 1059 */ 1060 static void xemaclite_ethtools_get_drvinfo(struct net_device *ndev, 1061 struct ethtool_drvinfo *ed) 1062 { 1063 strscpy(ed->driver, DRIVER_NAME, sizeof(ed->driver)); 1064 } 1065 1066 static const struct ethtool_ops xemaclite_ethtool_ops = { 1067 .get_drvinfo = xemaclite_ethtools_get_drvinfo, 1068 .get_link = ethtool_op_get_link, 1069 .get_link_ksettings = phy_ethtool_get_link_ksettings, 1070 .set_link_ksettings = phy_ethtool_set_link_ksettings, 1071 }; 1072 1073 static const struct net_device_ops xemaclite_netdev_ops; 1074 1075 /** 1076 * xemaclite_of_probe - Probe method for the Emaclite device. 1077 * @ofdev: Pointer to OF device structure 1078 * 1079 * This function probes for the Emaclite device in the device tree. 1080 * It initializes the driver data structure and the hardware, sets the MAC 1081 * address and registers the network device. 1082 * It also registers a mii_bus for the Emaclite device, if MDIO is included 1083 * in the device. 1084 * 1085 * Return: 0, if the driver is bound to the Emaclite device, or 1086 * a negative error if there is failure. 1087 */ 1088 static int xemaclite_of_probe(struct platform_device *ofdev) 1089 { 1090 struct resource *res; 1091 struct net_device *ndev = NULL; 1092 struct net_local *lp = NULL; 1093 struct device *dev = &ofdev->dev; 1094 1095 int rc = 0; 1096 1097 dev_info(dev, "Device Tree Probing\n"); 1098 1099 /* Create an ethernet device instance */ 1100 ndev = alloc_etherdev(sizeof(struct net_local)); 1101 if (!ndev) 1102 return -ENOMEM; 1103 1104 dev_set_drvdata(dev, ndev); 1105 SET_NETDEV_DEV(ndev, &ofdev->dev); 1106 1107 lp = netdev_priv(ndev); 1108 lp->ndev = ndev; 1109 1110 /* Get IRQ for the device */ 1111 rc = platform_get_irq(ofdev, 0); 1112 if (rc < 0) 1113 goto error; 1114 1115 ndev->irq = rc; 1116 1117 res = platform_get_resource(ofdev, IORESOURCE_MEM, 0); 1118 lp->base_addr = devm_ioremap_resource(&ofdev->dev, res); 1119 if (IS_ERR(lp->base_addr)) { 1120 rc = PTR_ERR(lp->base_addr); 1121 goto error; 1122 } 1123 1124 ndev->mem_start = res->start; 1125 ndev->mem_end = res->end; 1126 1127 spin_lock_init(&lp->reset_lock); 1128 lp->next_tx_buf_to_use = 0x0; 1129 lp->next_rx_buf_to_use = 0x0; 1130 lp->tx_ping_pong = get_bool(ofdev, "xlnx,tx-ping-pong"); 1131 lp->rx_ping_pong = get_bool(ofdev, "xlnx,rx-ping-pong"); 1132 1133 rc = of_get_ethdev_address(ofdev->dev.of_node, ndev); 1134 if (rc) { 1135 dev_warn(dev, "No MAC address found, using random\n"); 1136 eth_hw_addr_random(ndev); 1137 } 1138 1139 /* Clear the Tx CSR's in case this is a restart */ 1140 xemaclite_writel(0, lp->base_addr + XEL_TSR_OFFSET); 1141 xemaclite_writel(0, lp->base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET); 1142 1143 /* Set the MAC address in the EmacLite device */ 1144 xemaclite_update_address(lp, ndev->dev_addr); 1145 1146 lp->phy_node = of_parse_phandle(ofdev->dev.of_node, "phy-handle", 0); 1147 xemaclite_mdio_setup(lp, &ofdev->dev); 1148 1149 dev_info(dev, "MAC address is now %pM\n", ndev->dev_addr); 1150 1151 ndev->netdev_ops = &xemaclite_netdev_ops; 1152 ndev->ethtool_ops = &xemaclite_ethtool_ops; 1153 ndev->flags &= ~IFF_MULTICAST; 1154 ndev->watchdog_timeo = TX_TIMEOUT; 1155 1156 /* Finally, register the device */ 1157 rc = register_netdev(ndev); 1158 if (rc) { 1159 dev_err(dev, 1160 "Cannot register network device, aborting\n"); 1161 goto put_node; 1162 } 1163 1164 dev_info(dev, 1165 "Xilinx EmacLite at 0x%08lX mapped to 0x%p, irq=%d\n", 1166 (unsigned long __force)ndev->mem_start, lp->base_addr, ndev->irq); 1167 return 0; 1168 1169 put_node: 1170 of_node_put(lp->phy_node); 1171 error: 1172 free_netdev(ndev); 1173 return rc; 1174 } 1175 1176 /** 1177 * xemaclite_of_remove - Unbind the driver from the Emaclite device. 1178 * @of_dev: Pointer to OF device structure 1179 * 1180 * This function is called if a device is physically removed from the system or 1181 * if the driver module is being unloaded. It frees any resources allocated to 1182 * the device. 1183 * 1184 * Return: 0, always. 1185 */ 1186 static int xemaclite_of_remove(struct platform_device *of_dev) 1187 { 1188 struct net_device *ndev = platform_get_drvdata(of_dev); 1189 1190 struct net_local *lp = netdev_priv(ndev); 1191 1192 /* Un-register the mii_bus, if configured */ 1193 if (lp->mii_bus) { 1194 mdiobus_unregister(lp->mii_bus); 1195 mdiobus_free(lp->mii_bus); 1196 lp->mii_bus = NULL; 1197 } 1198 1199 unregister_netdev(ndev); 1200 1201 of_node_put(lp->phy_node); 1202 lp->phy_node = NULL; 1203 1204 free_netdev(ndev); 1205 1206 return 0; 1207 } 1208 1209 #ifdef CONFIG_NET_POLL_CONTROLLER 1210 static void 1211 xemaclite_poll_controller(struct net_device *ndev) 1212 { 1213 disable_irq(ndev->irq); 1214 xemaclite_interrupt(ndev->irq, ndev); 1215 enable_irq(ndev->irq); 1216 } 1217 #endif 1218 1219 /* Ioctl MII Interface */ 1220 static int xemaclite_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) 1221 { 1222 if (!dev->phydev || !netif_running(dev)) 1223 return -EINVAL; 1224 1225 switch (cmd) { 1226 case SIOCGMIIPHY: 1227 case SIOCGMIIREG: 1228 case SIOCSMIIREG: 1229 return phy_mii_ioctl(dev->phydev, rq, cmd); 1230 default: 1231 return -EOPNOTSUPP; 1232 } 1233 } 1234 1235 static const struct net_device_ops xemaclite_netdev_ops = { 1236 .ndo_open = xemaclite_open, 1237 .ndo_stop = xemaclite_close, 1238 .ndo_start_xmit = xemaclite_send, 1239 .ndo_set_mac_address = xemaclite_set_mac_address, 1240 .ndo_tx_timeout = xemaclite_tx_timeout, 1241 .ndo_eth_ioctl = xemaclite_ioctl, 1242 #ifdef CONFIG_NET_POLL_CONTROLLER 1243 .ndo_poll_controller = xemaclite_poll_controller, 1244 #endif 1245 }; 1246 1247 /* Match table for OF platform binding */ 1248 static const struct of_device_id xemaclite_of_match[] = { 1249 { .compatible = "xlnx,opb-ethernetlite-1.01.a", }, 1250 { .compatible = "xlnx,opb-ethernetlite-1.01.b", }, 1251 { .compatible = "xlnx,xps-ethernetlite-1.00.a", }, 1252 { .compatible = "xlnx,xps-ethernetlite-2.00.a", }, 1253 { .compatible = "xlnx,xps-ethernetlite-2.01.a", }, 1254 { .compatible = "xlnx,xps-ethernetlite-3.00.a", }, 1255 { /* end of list */ }, 1256 }; 1257 MODULE_DEVICE_TABLE(of, xemaclite_of_match); 1258 1259 static struct platform_driver xemaclite_of_driver = { 1260 .driver = { 1261 .name = DRIVER_NAME, 1262 .of_match_table = xemaclite_of_match, 1263 }, 1264 .probe = xemaclite_of_probe, 1265 .remove = xemaclite_of_remove, 1266 }; 1267 1268 module_platform_driver(xemaclite_of_driver); 1269 1270 MODULE_AUTHOR("Xilinx, Inc."); 1271 MODULE_DESCRIPTION("Xilinx Ethernet MAC Lite driver"); 1272 MODULE_LICENSE("GPL"); 1273