1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Xilinx EmacLite Linux driver for the Xilinx Ethernet MAC Lite device. 4 * 5 * This is a new flat driver which is based on the original emac_lite 6 * driver from John Williams <john.williams@xilinx.com>. 7 * 8 * 2007 - 2013 (c) Xilinx, Inc. 9 */ 10 11 #include <linux/module.h> 12 #include <linux/uaccess.h> 13 #include <linux/netdevice.h> 14 #include <linux/etherdevice.h> 15 #include <linux/skbuff.h> 16 #include <linux/ethtool.h> 17 #include <linux/io.h> 18 #include <linux/slab.h> 19 #include <linux/of_address.h> 20 #include <linux/of_device.h> 21 #include <linux/of_platform.h> 22 #include <linux/of_mdio.h> 23 #include <linux/of_net.h> 24 #include <linux/phy.h> 25 #include <linux/interrupt.h> 26 #include <linux/iopoll.h> 27 28 #define DRIVER_NAME "xilinx_emaclite" 29 30 /* Register offsets for the EmacLite Core */ 31 #define XEL_TXBUFF_OFFSET 0x0 /* Transmit Buffer */ 32 #define XEL_MDIOADDR_OFFSET 0x07E4 /* MDIO Address Register */ 33 #define XEL_MDIOWR_OFFSET 0x07E8 /* MDIO Write Data Register */ 34 #define XEL_MDIORD_OFFSET 0x07EC /* MDIO Read Data Register */ 35 #define XEL_MDIOCTRL_OFFSET 0x07F0 /* MDIO Control Register */ 36 #define XEL_GIER_OFFSET 0x07F8 /* GIE Register */ 37 #define XEL_TSR_OFFSET 0x07FC /* Tx status */ 38 #define XEL_TPLR_OFFSET 0x07F4 /* Tx packet length */ 39 40 #define XEL_RXBUFF_OFFSET 0x1000 /* Receive Buffer */ 41 #define XEL_RPLR_OFFSET 0x100C /* Rx packet length */ 42 #define XEL_RSR_OFFSET 0x17FC /* Rx status */ 43 44 #define XEL_BUFFER_OFFSET 0x0800 /* Next Tx/Rx buffer's offset */ 45 46 /* MDIO Address Register Bit Masks */ 47 #define XEL_MDIOADDR_REGADR_MASK 0x0000001F /* Register Address */ 48 #define XEL_MDIOADDR_PHYADR_MASK 0x000003E0 /* PHY Address */ 49 #define XEL_MDIOADDR_PHYADR_SHIFT 5 50 #define XEL_MDIOADDR_OP_MASK 0x00000400 /* RD/WR Operation */ 51 52 /* MDIO Write Data Register Bit Masks */ 53 #define XEL_MDIOWR_WRDATA_MASK 0x0000FFFF /* Data to be Written */ 54 55 /* MDIO Read Data Register Bit Masks */ 56 #define XEL_MDIORD_RDDATA_MASK 0x0000FFFF /* Data to be Read */ 57 58 /* MDIO Control Register Bit Masks */ 59 #define XEL_MDIOCTRL_MDIOSTS_MASK 0x00000001 /* MDIO Status Mask */ 60 #define XEL_MDIOCTRL_MDIOEN_MASK 0x00000008 /* MDIO Enable */ 61 62 /* Global Interrupt Enable Register (GIER) Bit Masks */ 63 #define XEL_GIER_GIE_MASK 0x80000000 /* Global Enable */ 64 65 /* Transmit Status Register (TSR) Bit Masks */ 66 #define XEL_TSR_XMIT_BUSY_MASK 0x00000001 /* Tx complete */ 67 #define XEL_TSR_PROGRAM_MASK 0x00000002 /* Program the MAC address */ 68 #define XEL_TSR_XMIT_IE_MASK 0x00000008 /* Tx interrupt enable bit */ 69 #define XEL_TSR_XMIT_ACTIVE_MASK 0x80000000 /* Buffer is active, SW bit 70 * only. This is not documented 71 * in the HW spec 72 */ 73 74 /* Define for programming the MAC address into the EmacLite */ 75 #define XEL_TSR_PROG_MAC_ADDR (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_PROGRAM_MASK) 76 77 /* Receive Status Register (RSR) */ 78 #define XEL_RSR_RECV_DONE_MASK 0x00000001 /* Rx complete */ 79 #define XEL_RSR_RECV_IE_MASK 0x00000008 /* Rx interrupt enable bit */ 80 81 /* Transmit Packet Length Register (TPLR) */ 82 #define XEL_TPLR_LENGTH_MASK 0x0000FFFF /* Tx packet length */ 83 84 /* Receive Packet Length Register (RPLR) */ 85 #define XEL_RPLR_LENGTH_MASK 0x0000FFFF /* Rx packet length */ 86 87 #define XEL_HEADER_OFFSET 12 /* Offset to length field */ 88 #define XEL_HEADER_SHIFT 16 /* Shift value for length */ 89 90 /* General Ethernet Definitions */ 91 #define XEL_ARP_PACKET_SIZE 28 /* Max ARP packet size */ 92 #define XEL_HEADER_IP_LENGTH_OFFSET 16 /* IP Length Offset */ 93 94 95 96 #define TX_TIMEOUT (60 * HZ) /* Tx timeout is 60 seconds. */ 97 #define ALIGNMENT 4 98 99 /* BUFFER_ALIGN(adr) calculates the number of bytes to the next alignment. */ 100 #define BUFFER_ALIGN(adr) ((ALIGNMENT - ((uintptr_t)adr)) % ALIGNMENT) 101 102 #ifdef __BIG_ENDIAN 103 #define xemaclite_readl ioread32be 104 #define xemaclite_writel iowrite32be 105 #else 106 #define xemaclite_readl ioread32 107 #define xemaclite_writel iowrite32 108 #endif 109 110 /** 111 * struct net_local - Our private per device data 112 * @ndev: instance of the network device 113 * @tx_ping_pong: indicates whether Tx Pong buffer is configured in HW 114 * @rx_ping_pong: indicates whether Rx Pong buffer is configured in HW 115 * @next_tx_buf_to_use: next Tx buffer to write to 116 * @next_rx_buf_to_use: next Rx buffer to read from 117 * @base_addr: base address of the Emaclite device 118 * @reset_lock: lock used for synchronization 119 * @deferred_skb: holds an skb (for transmission at a later time) when the 120 * Tx buffer is not free 121 * @phy_dev: pointer to the PHY device 122 * @phy_node: pointer to the PHY device node 123 * @mii_bus: pointer to the MII bus 124 * @last_link: last link status 125 */ 126 struct net_local { 127 128 struct net_device *ndev; 129 130 bool tx_ping_pong; 131 bool rx_ping_pong; 132 u32 next_tx_buf_to_use; 133 u32 next_rx_buf_to_use; 134 void __iomem *base_addr; 135 136 spinlock_t reset_lock; 137 struct sk_buff *deferred_skb; 138 139 struct phy_device *phy_dev; 140 struct device_node *phy_node; 141 142 struct mii_bus *mii_bus; 143 144 int last_link; 145 }; 146 147 148 /*************************/ 149 /* EmacLite driver calls */ 150 /*************************/ 151 152 /** 153 * xemaclite_enable_interrupts - Enable the interrupts for the EmacLite device 154 * @drvdata: Pointer to the Emaclite device private data 155 * 156 * This function enables the Tx and Rx interrupts for the Emaclite device along 157 * with the Global Interrupt Enable. 158 */ 159 static void xemaclite_enable_interrupts(struct net_local *drvdata) 160 { 161 u32 reg_data; 162 163 /* Enable the Tx interrupts for the first Buffer */ 164 reg_data = xemaclite_readl(drvdata->base_addr + XEL_TSR_OFFSET); 165 xemaclite_writel(reg_data | XEL_TSR_XMIT_IE_MASK, 166 drvdata->base_addr + XEL_TSR_OFFSET); 167 168 /* Enable the Rx interrupts for the first buffer */ 169 xemaclite_writel(XEL_RSR_RECV_IE_MASK, drvdata->base_addr + XEL_RSR_OFFSET); 170 171 /* Enable the Global Interrupt Enable */ 172 xemaclite_writel(XEL_GIER_GIE_MASK, drvdata->base_addr + XEL_GIER_OFFSET); 173 } 174 175 /** 176 * xemaclite_disable_interrupts - Disable the interrupts for the EmacLite device 177 * @drvdata: Pointer to the Emaclite device private data 178 * 179 * This function disables the Tx and Rx interrupts for the Emaclite device, 180 * along with the Global Interrupt Enable. 181 */ 182 static void xemaclite_disable_interrupts(struct net_local *drvdata) 183 { 184 u32 reg_data; 185 186 /* Disable the Global Interrupt Enable */ 187 xemaclite_writel(XEL_GIER_GIE_MASK, drvdata->base_addr + XEL_GIER_OFFSET); 188 189 /* Disable the Tx interrupts for the first buffer */ 190 reg_data = xemaclite_readl(drvdata->base_addr + XEL_TSR_OFFSET); 191 xemaclite_writel(reg_data & (~XEL_TSR_XMIT_IE_MASK), 192 drvdata->base_addr + XEL_TSR_OFFSET); 193 194 /* Disable the Rx interrupts for the first buffer */ 195 reg_data = xemaclite_readl(drvdata->base_addr + XEL_RSR_OFFSET); 196 xemaclite_writel(reg_data & (~XEL_RSR_RECV_IE_MASK), 197 drvdata->base_addr + XEL_RSR_OFFSET); 198 } 199 200 /** 201 * xemaclite_aligned_write - Write from 16-bit aligned to 32-bit aligned address 202 * @src_ptr: Void pointer to the 16-bit aligned source address 203 * @dest_ptr: Pointer to the 32-bit aligned destination address 204 * @length: Number bytes to write from source to destination 205 * 206 * This function writes data from a 16-bit aligned buffer to a 32-bit aligned 207 * address in the EmacLite device. 208 */ 209 static void xemaclite_aligned_write(void *src_ptr, u32 *dest_ptr, 210 unsigned length) 211 { 212 u32 align_buffer; 213 u32 *to_u32_ptr; 214 u16 *from_u16_ptr, *to_u16_ptr; 215 216 to_u32_ptr = dest_ptr; 217 from_u16_ptr = src_ptr; 218 align_buffer = 0; 219 220 for (; length > 3; length -= 4) { 221 to_u16_ptr = (u16 *)&align_buffer; 222 *to_u16_ptr++ = *from_u16_ptr++; 223 *to_u16_ptr++ = *from_u16_ptr++; 224 225 /* This barrier resolves occasional issues seen around 226 * cases where the data is not properly flushed out 227 * from the processor store buffers to the destination 228 * memory locations. 229 */ 230 wmb(); 231 232 /* Output a word */ 233 *to_u32_ptr++ = align_buffer; 234 } 235 if (length) { 236 u8 *from_u8_ptr, *to_u8_ptr; 237 238 /* Set up to output the remaining data */ 239 align_buffer = 0; 240 to_u8_ptr = (u8 *)&align_buffer; 241 from_u8_ptr = (u8 *)from_u16_ptr; 242 243 /* Output the remaining data */ 244 for (; length > 0; length--) 245 *to_u8_ptr++ = *from_u8_ptr++; 246 247 /* This barrier resolves occasional issues seen around 248 * cases where the data is not properly flushed out 249 * from the processor store buffers to the destination 250 * memory locations. 251 */ 252 wmb(); 253 *to_u32_ptr = align_buffer; 254 } 255 } 256 257 /** 258 * xemaclite_aligned_read - Read from 32-bit aligned to 16-bit aligned buffer 259 * @src_ptr: Pointer to the 32-bit aligned source address 260 * @dest_ptr: Pointer to the 16-bit aligned destination address 261 * @length: Number bytes to read from source to destination 262 * 263 * This function reads data from a 32-bit aligned address in the EmacLite device 264 * to a 16-bit aligned buffer. 265 */ 266 static void xemaclite_aligned_read(u32 *src_ptr, u8 *dest_ptr, 267 unsigned length) 268 { 269 u16 *to_u16_ptr, *from_u16_ptr; 270 u32 *from_u32_ptr; 271 u32 align_buffer; 272 273 from_u32_ptr = src_ptr; 274 to_u16_ptr = (u16 *)dest_ptr; 275 276 for (; length > 3; length -= 4) { 277 /* Copy each word into the temporary buffer */ 278 align_buffer = *from_u32_ptr++; 279 from_u16_ptr = (u16 *)&align_buffer; 280 281 /* Read data from source */ 282 *to_u16_ptr++ = *from_u16_ptr++; 283 *to_u16_ptr++ = *from_u16_ptr++; 284 } 285 286 if (length) { 287 u8 *to_u8_ptr, *from_u8_ptr; 288 289 /* Set up to read the remaining data */ 290 to_u8_ptr = (u8 *)to_u16_ptr; 291 align_buffer = *from_u32_ptr++; 292 from_u8_ptr = (u8 *)&align_buffer; 293 294 /* Read the remaining data */ 295 for (; length > 0; length--) 296 *to_u8_ptr = *from_u8_ptr; 297 } 298 } 299 300 /** 301 * xemaclite_send_data - Send an Ethernet frame 302 * @drvdata: Pointer to the Emaclite device private data 303 * @data: Pointer to the data to be sent 304 * @byte_count: Total frame size, including header 305 * 306 * This function checks if the Tx buffer of the Emaclite device is free to send 307 * data. If so, it fills the Tx buffer with data for transmission. Otherwise, it 308 * returns an error. 309 * 310 * Return: 0 upon success or -1 if the buffer(s) are full. 311 * 312 * Note: The maximum Tx packet size can not be more than Ethernet header 313 * (14 Bytes) + Maximum MTU (1500 bytes). This is excluding FCS. 314 */ 315 static int xemaclite_send_data(struct net_local *drvdata, u8 *data, 316 unsigned int byte_count) 317 { 318 u32 reg_data; 319 void __iomem *addr; 320 321 /* Determine the expected Tx buffer address */ 322 addr = drvdata->base_addr + drvdata->next_tx_buf_to_use; 323 324 /* If the length is too large, truncate it */ 325 if (byte_count > ETH_FRAME_LEN) 326 byte_count = ETH_FRAME_LEN; 327 328 /* Check if the expected buffer is available */ 329 reg_data = xemaclite_readl(addr + XEL_TSR_OFFSET); 330 if ((reg_data & (XEL_TSR_XMIT_BUSY_MASK | 331 XEL_TSR_XMIT_ACTIVE_MASK)) == 0) { 332 333 /* Switch to next buffer if configured */ 334 if (drvdata->tx_ping_pong != 0) 335 drvdata->next_tx_buf_to_use ^= XEL_BUFFER_OFFSET; 336 } else if (drvdata->tx_ping_pong != 0) { 337 /* If the expected buffer is full, try the other buffer, 338 * if it is configured in HW 339 */ 340 341 addr = (void __iomem __force *)((uintptr_t __force)addr ^ 342 XEL_BUFFER_OFFSET); 343 reg_data = xemaclite_readl(addr + XEL_TSR_OFFSET); 344 345 if ((reg_data & (XEL_TSR_XMIT_BUSY_MASK | 346 XEL_TSR_XMIT_ACTIVE_MASK)) != 0) 347 return -1; /* Buffers were full, return failure */ 348 } else 349 return -1; /* Buffer was full, return failure */ 350 351 /* Write the frame to the buffer */ 352 xemaclite_aligned_write(data, (u32 __force *)addr, byte_count); 353 354 xemaclite_writel((byte_count & XEL_TPLR_LENGTH_MASK), 355 addr + XEL_TPLR_OFFSET); 356 357 /* Update the Tx Status Register to indicate that there is a 358 * frame to send. Set the XEL_TSR_XMIT_ACTIVE_MASK flag which 359 * is used by the interrupt handler to check whether a frame 360 * has been transmitted 361 */ 362 reg_data = xemaclite_readl(addr + XEL_TSR_OFFSET); 363 reg_data |= (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_XMIT_ACTIVE_MASK); 364 xemaclite_writel(reg_data, addr + XEL_TSR_OFFSET); 365 366 return 0; 367 } 368 369 /** 370 * xemaclite_recv_data - Receive a frame 371 * @drvdata: Pointer to the Emaclite device private data 372 * @data: Address where the data is to be received 373 * @maxlen: Maximum supported ethernet packet length 374 * 375 * This function is intended to be called from the interrupt context or 376 * with a wrapper which waits for the receive frame to be available. 377 * 378 * Return: Total number of bytes received 379 */ 380 static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data, int maxlen) 381 { 382 void __iomem *addr; 383 u16 length, proto_type; 384 u32 reg_data; 385 386 /* Determine the expected buffer address */ 387 addr = (drvdata->base_addr + drvdata->next_rx_buf_to_use); 388 389 /* Verify which buffer has valid data */ 390 reg_data = xemaclite_readl(addr + XEL_RSR_OFFSET); 391 392 if ((reg_data & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) { 393 if (drvdata->rx_ping_pong != 0) 394 drvdata->next_rx_buf_to_use ^= XEL_BUFFER_OFFSET; 395 } else { 396 /* The instance is out of sync, try other buffer if other 397 * buffer is configured, return 0 otherwise. If the instance is 398 * out of sync, do not update the 'next_rx_buf_to_use' since it 399 * will correct on subsequent calls 400 */ 401 if (drvdata->rx_ping_pong != 0) 402 addr = (void __iomem __force *) 403 ((uintptr_t __force)addr ^ 404 XEL_BUFFER_OFFSET); 405 else 406 return 0; /* No data was available */ 407 408 /* Verify that buffer has valid data */ 409 reg_data = xemaclite_readl(addr + XEL_RSR_OFFSET); 410 if ((reg_data & XEL_RSR_RECV_DONE_MASK) != 411 XEL_RSR_RECV_DONE_MASK) 412 return 0; /* No data was available */ 413 } 414 415 /* Get the protocol type of the ethernet frame that arrived 416 */ 417 proto_type = ((ntohl(xemaclite_readl(addr + XEL_HEADER_OFFSET + 418 XEL_RXBUFF_OFFSET)) >> XEL_HEADER_SHIFT) & 419 XEL_RPLR_LENGTH_MASK); 420 421 /* Check if received ethernet frame is a raw ethernet frame 422 * or an IP packet or an ARP packet 423 */ 424 if (proto_type > ETH_DATA_LEN) { 425 426 if (proto_type == ETH_P_IP) { 427 length = ((ntohl(xemaclite_readl(addr + 428 XEL_HEADER_IP_LENGTH_OFFSET + 429 XEL_RXBUFF_OFFSET)) >> 430 XEL_HEADER_SHIFT) & 431 XEL_RPLR_LENGTH_MASK); 432 length = min_t(u16, length, ETH_DATA_LEN); 433 length += ETH_HLEN + ETH_FCS_LEN; 434 435 } else if (proto_type == ETH_P_ARP) 436 length = XEL_ARP_PACKET_SIZE + ETH_HLEN + ETH_FCS_LEN; 437 else 438 /* Field contains type other than IP or ARP, use max 439 * frame size and let user parse it 440 */ 441 length = ETH_FRAME_LEN + ETH_FCS_LEN; 442 } else 443 /* Use the length in the frame, plus the header and trailer */ 444 length = proto_type + ETH_HLEN + ETH_FCS_LEN; 445 446 if (WARN_ON(length > maxlen)) 447 length = maxlen; 448 449 /* Read from the EmacLite device */ 450 xemaclite_aligned_read((u32 __force *)(addr + XEL_RXBUFF_OFFSET), 451 data, length); 452 453 /* Acknowledge the frame */ 454 reg_data = xemaclite_readl(addr + XEL_RSR_OFFSET); 455 reg_data &= ~XEL_RSR_RECV_DONE_MASK; 456 xemaclite_writel(reg_data, addr + XEL_RSR_OFFSET); 457 458 return length; 459 } 460 461 /** 462 * xemaclite_update_address - Update the MAC address in the device 463 * @drvdata: Pointer to the Emaclite device private data 464 * @address_ptr:Pointer to the MAC address (MAC address is a 48-bit value) 465 * 466 * Tx must be idle and Rx should be idle for deterministic results. 467 * It is recommended that this function should be called after the 468 * initialization and before transmission of any packets from the device. 469 * The MAC address can be programmed using any of the two transmit 470 * buffers (if configured). 471 */ 472 static void xemaclite_update_address(struct net_local *drvdata, 473 u8 *address_ptr) 474 { 475 void __iomem *addr; 476 u32 reg_data; 477 478 /* Determine the expected Tx buffer address */ 479 addr = drvdata->base_addr + drvdata->next_tx_buf_to_use; 480 481 xemaclite_aligned_write(address_ptr, (u32 __force *)addr, ETH_ALEN); 482 483 xemaclite_writel(ETH_ALEN, addr + XEL_TPLR_OFFSET); 484 485 /* Update the MAC address in the EmacLite */ 486 reg_data = xemaclite_readl(addr + XEL_TSR_OFFSET); 487 xemaclite_writel(reg_data | XEL_TSR_PROG_MAC_ADDR, addr + XEL_TSR_OFFSET); 488 489 /* Wait for EmacLite to finish with the MAC address update */ 490 while ((xemaclite_readl(addr + XEL_TSR_OFFSET) & 491 XEL_TSR_PROG_MAC_ADDR) != 0) 492 ; 493 } 494 495 /** 496 * xemaclite_set_mac_address - Set the MAC address for this device 497 * @dev: Pointer to the network device instance 498 * @address: Void pointer to the sockaddr structure 499 * 500 * This function copies the HW address from the sockaddr strucutre to the 501 * net_device structure and updates the address in HW. 502 * 503 * Return: Error if the net device is busy or 0 if the addr is set 504 * successfully 505 */ 506 static int xemaclite_set_mac_address(struct net_device *dev, void *address) 507 { 508 struct net_local *lp = netdev_priv(dev); 509 struct sockaddr *addr = address; 510 511 if (netif_running(dev)) 512 return -EBUSY; 513 514 memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); 515 xemaclite_update_address(lp, dev->dev_addr); 516 return 0; 517 } 518 519 /** 520 * xemaclite_tx_timeout - Callback for Tx Timeout 521 * @dev: Pointer to the network device 522 * @txqueue: Unused 523 * 524 * This function is called when Tx time out occurs for Emaclite device. 525 */ 526 static void xemaclite_tx_timeout(struct net_device *dev, unsigned int txqueue) 527 { 528 struct net_local *lp = netdev_priv(dev); 529 unsigned long flags; 530 531 dev_err(&lp->ndev->dev, "Exceeded transmit timeout of %lu ms\n", 532 TX_TIMEOUT * 1000UL / HZ); 533 534 dev->stats.tx_errors++; 535 536 /* Reset the device */ 537 spin_lock_irqsave(&lp->reset_lock, flags); 538 539 /* Shouldn't really be necessary, but shouldn't hurt */ 540 netif_stop_queue(dev); 541 542 xemaclite_disable_interrupts(lp); 543 xemaclite_enable_interrupts(lp); 544 545 if (lp->deferred_skb) { 546 dev_kfree_skb(lp->deferred_skb); 547 lp->deferred_skb = NULL; 548 dev->stats.tx_errors++; 549 } 550 551 /* To exclude tx timeout */ 552 netif_trans_update(dev); /* prevent tx timeout */ 553 554 /* We're all ready to go. Start the queue */ 555 netif_wake_queue(dev); 556 spin_unlock_irqrestore(&lp->reset_lock, flags); 557 } 558 559 /**********************/ 560 /* Interrupt Handlers */ 561 /**********************/ 562 563 /** 564 * xemaclite_tx_handler - Interrupt handler for frames sent 565 * @dev: Pointer to the network device 566 * 567 * This function updates the number of packets transmitted and handles the 568 * deferred skb, if there is one. 569 */ 570 static void xemaclite_tx_handler(struct net_device *dev) 571 { 572 struct net_local *lp = netdev_priv(dev); 573 574 dev->stats.tx_packets++; 575 576 if (!lp->deferred_skb) 577 return; 578 579 if (xemaclite_send_data(lp, (u8 *)lp->deferred_skb->data, 580 lp->deferred_skb->len)) 581 return; 582 583 dev->stats.tx_bytes += lp->deferred_skb->len; 584 dev_consume_skb_irq(lp->deferred_skb); 585 lp->deferred_skb = NULL; 586 netif_trans_update(dev); /* prevent tx timeout */ 587 netif_wake_queue(dev); 588 } 589 590 /** 591 * xemaclite_rx_handler- Interrupt handler for frames received 592 * @dev: Pointer to the network device 593 * 594 * This function allocates memory for a socket buffer, fills it with data 595 * received and hands it over to the TCP/IP stack. 596 */ 597 static void xemaclite_rx_handler(struct net_device *dev) 598 { 599 struct net_local *lp = netdev_priv(dev); 600 struct sk_buff *skb; 601 unsigned int align; 602 u32 len; 603 604 len = ETH_FRAME_LEN + ETH_FCS_LEN; 605 skb = netdev_alloc_skb(dev, len + ALIGNMENT); 606 if (!skb) { 607 /* Couldn't get memory. */ 608 dev->stats.rx_dropped++; 609 dev_err(&lp->ndev->dev, "Could not allocate receive buffer\n"); 610 return; 611 } 612 613 /* A new skb should have the data halfword aligned, but this code is 614 * here just in case that isn't true. Calculate how many 615 * bytes we should reserve to get the data to start on a word 616 * boundary 617 */ 618 align = BUFFER_ALIGN(skb->data); 619 if (align) 620 skb_reserve(skb, align); 621 622 skb_reserve(skb, 2); 623 624 len = xemaclite_recv_data(lp, (u8 *)skb->data, len); 625 626 if (!len) { 627 dev->stats.rx_errors++; 628 dev_kfree_skb_irq(skb); 629 return; 630 } 631 632 skb_put(skb, len); /* Tell the skb how much data we got */ 633 634 skb->protocol = eth_type_trans(skb, dev); 635 skb_checksum_none_assert(skb); 636 637 dev->stats.rx_packets++; 638 dev->stats.rx_bytes += len; 639 640 if (!skb_defer_rx_timestamp(skb)) 641 netif_rx(skb); /* Send the packet upstream */ 642 } 643 644 /** 645 * xemaclite_interrupt - Interrupt handler for this driver 646 * @irq: Irq of the Emaclite device 647 * @dev_id: Void pointer to the network device instance used as callback 648 * reference 649 * 650 * Return: IRQ_HANDLED 651 * 652 * This function handles the Tx and Rx interrupts of the EmacLite device. 653 */ 654 static irqreturn_t xemaclite_interrupt(int irq, void *dev_id) 655 { 656 bool tx_complete = false; 657 struct net_device *dev = dev_id; 658 struct net_local *lp = netdev_priv(dev); 659 void __iomem *base_addr = lp->base_addr; 660 u32 tx_status; 661 662 /* Check if there is Rx Data available */ 663 if ((xemaclite_readl(base_addr + XEL_RSR_OFFSET) & 664 XEL_RSR_RECV_DONE_MASK) || 665 (xemaclite_readl(base_addr + XEL_BUFFER_OFFSET + XEL_RSR_OFFSET) 666 & XEL_RSR_RECV_DONE_MASK)) 667 668 xemaclite_rx_handler(dev); 669 670 /* Check if the Transmission for the first buffer is completed */ 671 tx_status = xemaclite_readl(base_addr + XEL_TSR_OFFSET); 672 if (((tx_status & XEL_TSR_XMIT_BUSY_MASK) == 0) && 673 (tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) { 674 675 tx_status &= ~XEL_TSR_XMIT_ACTIVE_MASK; 676 xemaclite_writel(tx_status, base_addr + XEL_TSR_OFFSET); 677 678 tx_complete = true; 679 } 680 681 /* Check if the Transmission for the second buffer is completed */ 682 tx_status = xemaclite_readl(base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET); 683 if (((tx_status & XEL_TSR_XMIT_BUSY_MASK) == 0) && 684 (tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) { 685 686 tx_status &= ~XEL_TSR_XMIT_ACTIVE_MASK; 687 xemaclite_writel(tx_status, base_addr + XEL_BUFFER_OFFSET + 688 XEL_TSR_OFFSET); 689 690 tx_complete = true; 691 } 692 693 /* If there was a Tx interrupt, call the Tx Handler */ 694 if (tx_complete != 0) 695 xemaclite_tx_handler(dev); 696 697 return IRQ_HANDLED; 698 } 699 700 /**********************/ 701 /* MDIO Bus functions */ 702 /**********************/ 703 704 /** 705 * xemaclite_mdio_wait - Wait for the MDIO to be ready to use 706 * @lp: Pointer to the Emaclite device private data 707 * 708 * This function waits till the device is ready to accept a new MDIO 709 * request. 710 * 711 * Return: 0 for success or ETIMEDOUT for a timeout 712 */ 713 714 static int xemaclite_mdio_wait(struct net_local *lp) 715 { 716 u32 val; 717 718 /* wait for the MDIO interface to not be busy or timeout 719 * after some time. 720 */ 721 return readx_poll_timeout(xemaclite_readl, 722 lp->base_addr + XEL_MDIOCTRL_OFFSET, 723 val, !(val & XEL_MDIOCTRL_MDIOSTS_MASK), 724 1000, 20000); 725 } 726 727 /** 728 * xemaclite_mdio_read - Read from a given MII management register 729 * @bus: the mii_bus struct 730 * @phy_id: the phy address 731 * @reg: register number to read from 732 * 733 * This function waits till the device is ready to accept a new MDIO 734 * request and then writes the phy address to the MDIO Address register 735 * and reads data from MDIO Read Data register, when its available. 736 * 737 * Return: Value read from the MII management register 738 */ 739 static int xemaclite_mdio_read(struct mii_bus *bus, int phy_id, int reg) 740 { 741 struct net_local *lp = bus->priv; 742 u32 ctrl_reg; 743 u32 rc; 744 745 if (xemaclite_mdio_wait(lp)) 746 return -ETIMEDOUT; 747 748 /* Write the PHY address, register number and set the OP bit in the 749 * MDIO Address register. Set the Status bit in the MDIO Control 750 * register to start a MDIO read transaction. 751 */ 752 ctrl_reg = xemaclite_readl(lp->base_addr + XEL_MDIOCTRL_OFFSET); 753 xemaclite_writel(XEL_MDIOADDR_OP_MASK | 754 ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg), 755 lp->base_addr + XEL_MDIOADDR_OFFSET); 756 xemaclite_writel(ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK, 757 lp->base_addr + XEL_MDIOCTRL_OFFSET); 758 759 if (xemaclite_mdio_wait(lp)) 760 return -ETIMEDOUT; 761 762 rc = xemaclite_readl(lp->base_addr + XEL_MDIORD_OFFSET); 763 764 dev_dbg(&lp->ndev->dev, 765 "%s(phy_id=%i, reg=%x) == %x\n", __func__, 766 phy_id, reg, rc); 767 768 return rc; 769 } 770 771 /** 772 * xemaclite_mdio_write - Write to a given MII management register 773 * @bus: the mii_bus struct 774 * @phy_id: the phy address 775 * @reg: register number to write to 776 * @val: value to write to the register number specified by reg 777 * 778 * This function waits till the device is ready to accept a new MDIO 779 * request and then writes the val to the MDIO Write Data register. 780 * 781 * Return: 0 upon success or a negative error upon failure 782 */ 783 static int xemaclite_mdio_write(struct mii_bus *bus, int phy_id, int reg, 784 u16 val) 785 { 786 struct net_local *lp = bus->priv; 787 u32 ctrl_reg; 788 789 dev_dbg(&lp->ndev->dev, 790 "%s(phy_id=%i, reg=%x, val=%x)\n", __func__, 791 phy_id, reg, val); 792 793 if (xemaclite_mdio_wait(lp)) 794 return -ETIMEDOUT; 795 796 /* Write the PHY address, register number and clear the OP bit in the 797 * MDIO Address register and then write the value into the MDIO Write 798 * Data register. Finally, set the Status bit in the MDIO Control 799 * register to start a MDIO write transaction. 800 */ 801 ctrl_reg = xemaclite_readl(lp->base_addr + XEL_MDIOCTRL_OFFSET); 802 xemaclite_writel(~XEL_MDIOADDR_OP_MASK & 803 ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg), 804 lp->base_addr + XEL_MDIOADDR_OFFSET); 805 xemaclite_writel(val, lp->base_addr + XEL_MDIOWR_OFFSET); 806 xemaclite_writel(ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK, 807 lp->base_addr + XEL_MDIOCTRL_OFFSET); 808 809 return 0; 810 } 811 812 /** 813 * xemaclite_mdio_setup - Register mii_bus for the Emaclite device 814 * @lp: Pointer to the Emaclite device private data 815 * @dev: Pointer to OF device structure 816 * 817 * This function enables MDIO bus in the Emaclite device and registers a 818 * mii_bus. 819 * 820 * Return: 0 upon success or a negative error upon failure 821 */ 822 static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev) 823 { 824 struct mii_bus *bus; 825 int rc; 826 struct resource res; 827 struct device_node *np = of_get_parent(lp->phy_node); 828 struct device_node *npp; 829 830 /* Don't register the MDIO bus if the phy_node or its parent node 831 * can't be found. 832 */ 833 if (!np) { 834 dev_err(dev, "Failed to register mdio bus.\n"); 835 return -ENODEV; 836 } 837 npp = of_get_parent(np); 838 839 of_address_to_resource(npp, 0, &res); 840 if (lp->ndev->mem_start != res.start) { 841 struct phy_device *phydev; 842 phydev = of_phy_find_device(lp->phy_node); 843 if (!phydev) 844 dev_info(dev, 845 "MDIO of the phy is not registered yet\n"); 846 else 847 put_device(&phydev->mdio.dev); 848 return 0; 849 } 850 851 /* Enable the MDIO bus by asserting the enable bit in MDIO Control 852 * register. 853 */ 854 xemaclite_writel(XEL_MDIOCTRL_MDIOEN_MASK, 855 lp->base_addr + XEL_MDIOCTRL_OFFSET); 856 857 bus = mdiobus_alloc(); 858 if (!bus) { 859 dev_err(dev, "Failed to allocate mdiobus\n"); 860 return -ENOMEM; 861 } 862 863 snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx", 864 (unsigned long long)res.start); 865 bus->priv = lp; 866 bus->name = "Xilinx Emaclite MDIO"; 867 bus->read = xemaclite_mdio_read; 868 bus->write = xemaclite_mdio_write; 869 bus->parent = dev; 870 871 rc = of_mdiobus_register(bus, np); 872 if (rc) { 873 dev_err(dev, "Failed to register mdio bus.\n"); 874 goto err_register; 875 } 876 877 lp->mii_bus = bus; 878 879 return 0; 880 881 err_register: 882 mdiobus_free(bus); 883 return rc; 884 } 885 886 /** 887 * xemaclite_adjust_link - Link state callback for the Emaclite device 888 * @ndev: pointer to net_device struct 889 * 890 * There's nothing in the Emaclite device to be configured when the link 891 * state changes. We just print the status. 892 */ 893 static void xemaclite_adjust_link(struct net_device *ndev) 894 { 895 struct net_local *lp = netdev_priv(ndev); 896 struct phy_device *phy = lp->phy_dev; 897 int link_state; 898 899 /* hash together the state values to decide if something has changed */ 900 link_state = phy->speed | (phy->duplex << 1) | phy->link; 901 902 if (lp->last_link != link_state) { 903 lp->last_link = link_state; 904 phy_print_status(phy); 905 } 906 } 907 908 /** 909 * xemaclite_open - Open the network device 910 * @dev: Pointer to the network device 911 * 912 * This function sets the MAC address, requests an IRQ and enables interrupts 913 * for the Emaclite device and starts the Tx queue. 914 * It also connects to the phy device, if MDIO is included in Emaclite device. 915 * 916 * Return: 0 on success. -ENODEV, if PHY cannot be connected. 917 * Non-zero error value on failure. 918 */ 919 static int xemaclite_open(struct net_device *dev) 920 { 921 struct net_local *lp = netdev_priv(dev); 922 int retval; 923 924 /* Just to be safe, stop the device first */ 925 xemaclite_disable_interrupts(lp); 926 927 if (lp->phy_node) { 928 u32 bmcr; 929 930 lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node, 931 xemaclite_adjust_link, 0, 932 PHY_INTERFACE_MODE_MII); 933 if (!lp->phy_dev) { 934 dev_err(&lp->ndev->dev, "of_phy_connect() failed\n"); 935 return -ENODEV; 936 } 937 938 /* EmacLite doesn't support giga-bit speeds */ 939 phy_set_max_speed(lp->phy_dev, SPEED_100); 940 941 /* Don't advertise 1000BASE-T Full/Half duplex speeds */ 942 phy_write(lp->phy_dev, MII_CTRL1000, 0); 943 944 /* Advertise only 10 and 100mbps full/half duplex speeds */ 945 phy_write(lp->phy_dev, MII_ADVERTISE, ADVERTISE_ALL | 946 ADVERTISE_CSMA); 947 948 /* Restart auto negotiation */ 949 bmcr = phy_read(lp->phy_dev, MII_BMCR); 950 bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART); 951 phy_write(lp->phy_dev, MII_BMCR, bmcr); 952 953 phy_start(lp->phy_dev); 954 } 955 956 /* Set the MAC address each time opened */ 957 xemaclite_update_address(lp, dev->dev_addr); 958 959 /* Grab the IRQ */ 960 retval = request_irq(dev->irq, xemaclite_interrupt, 0, dev->name, dev); 961 if (retval) { 962 dev_err(&lp->ndev->dev, "Could not allocate interrupt %d\n", 963 dev->irq); 964 if (lp->phy_dev) 965 phy_disconnect(lp->phy_dev); 966 lp->phy_dev = NULL; 967 968 return retval; 969 } 970 971 /* Enable Interrupts */ 972 xemaclite_enable_interrupts(lp); 973 974 /* We're ready to go */ 975 netif_start_queue(dev); 976 977 return 0; 978 } 979 980 /** 981 * xemaclite_close - Close the network device 982 * @dev: Pointer to the network device 983 * 984 * This function stops the Tx queue, disables interrupts and frees the IRQ for 985 * the Emaclite device. 986 * It also disconnects the phy device associated with the Emaclite device. 987 * 988 * Return: 0, always. 989 */ 990 static int xemaclite_close(struct net_device *dev) 991 { 992 struct net_local *lp = netdev_priv(dev); 993 994 netif_stop_queue(dev); 995 xemaclite_disable_interrupts(lp); 996 free_irq(dev->irq, dev); 997 998 if (lp->phy_dev) 999 phy_disconnect(lp->phy_dev); 1000 lp->phy_dev = NULL; 1001 1002 return 0; 1003 } 1004 1005 /** 1006 * xemaclite_send - Transmit a frame 1007 * @orig_skb: Pointer to the socket buffer to be transmitted 1008 * @dev: Pointer to the network device 1009 * 1010 * This function checks if the Tx buffer of the Emaclite device is free to send 1011 * data. If so, it fills the Tx buffer with data from socket buffer data, 1012 * updates the stats and frees the socket buffer. The Tx completion is signaled 1013 * by an interrupt. If the Tx buffer isn't free, then the socket buffer is 1014 * deferred and the Tx queue is stopped so that the deferred socket buffer can 1015 * be transmitted when the Emaclite device is free to transmit data. 1016 * 1017 * Return: NETDEV_TX_OK, always. 1018 */ 1019 static netdev_tx_t 1020 xemaclite_send(struct sk_buff *orig_skb, struct net_device *dev) 1021 { 1022 struct net_local *lp = netdev_priv(dev); 1023 struct sk_buff *new_skb; 1024 unsigned int len; 1025 unsigned long flags; 1026 1027 len = orig_skb->len; 1028 1029 new_skb = orig_skb; 1030 1031 spin_lock_irqsave(&lp->reset_lock, flags); 1032 if (xemaclite_send_data(lp, (u8 *)new_skb->data, len) != 0) { 1033 /* If the Emaclite Tx buffer is busy, stop the Tx queue and 1034 * defer the skb for transmission during the ISR, after the 1035 * current transmission is complete 1036 */ 1037 netif_stop_queue(dev); 1038 lp->deferred_skb = new_skb; 1039 /* Take the time stamp now, since we can't do this in an ISR. */ 1040 skb_tx_timestamp(new_skb); 1041 spin_unlock_irqrestore(&lp->reset_lock, flags); 1042 return NETDEV_TX_OK; 1043 } 1044 spin_unlock_irqrestore(&lp->reset_lock, flags); 1045 1046 skb_tx_timestamp(new_skb); 1047 1048 dev->stats.tx_bytes += len; 1049 dev_consume_skb_any(new_skb); 1050 1051 return NETDEV_TX_OK; 1052 } 1053 1054 /** 1055 * get_bool - Get a parameter from the OF device 1056 * @ofdev: Pointer to OF device structure 1057 * @s: Property to be retrieved 1058 * 1059 * This function looks for a property in the device node and returns the value 1060 * of the property if its found or 0 if the property is not found. 1061 * 1062 * Return: Value of the parameter if the parameter is found, or 0 otherwise 1063 */ 1064 static bool get_bool(struct platform_device *ofdev, const char *s) 1065 { 1066 u32 *p = (u32 *)of_get_property(ofdev->dev.of_node, s, NULL); 1067 1068 if (!p) { 1069 dev_warn(&ofdev->dev, "Parameter %s not found, defaulting to false\n", s); 1070 return false; 1071 } 1072 1073 return (bool)*p; 1074 } 1075 1076 /** 1077 * xemaclite_ethtools_get_drvinfo - Get various Axi Emac Lite driver info 1078 * @ndev: Pointer to net_device structure 1079 * @ed: Pointer to ethtool_drvinfo structure 1080 * 1081 * This implements ethtool command for getting the driver information. 1082 * Issue "ethtool -i ethX" under linux prompt to execute this function. 1083 */ 1084 static void xemaclite_ethtools_get_drvinfo(struct net_device *ndev, 1085 struct ethtool_drvinfo *ed) 1086 { 1087 strlcpy(ed->driver, DRIVER_NAME, sizeof(ed->driver)); 1088 } 1089 1090 static const struct ethtool_ops xemaclite_ethtool_ops = { 1091 .get_drvinfo = xemaclite_ethtools_get_drvinfo, 1092 .get_link = ethtool_op_get_link, 1093 .get_link_ksettings = phy_ethtool_get_link_ksettings, 1094 .set_link_ksettings = phy_ethtool_set_link_ksettings, 1095 }; 1096 1097 static const struct net_device_ops xemaclite_netdev_ops; 1098 1099 /** 1100 * xemaclite_of_probe - Probe method for the Emaclite device. 1101 * @ofdev: Pointer to OF device structure 1102 * 1103 * This function probes for the Emaclite device in the device tree. 1104 * It initializes the driver data structure and the hardware, sets the MAC 1105 * address and registers the network device. 1106 * It also registers a mii_bus for the Emaclite device, if MDIO is included 1107 * in the device. 1108 * 1109 * Return: 0, if the driver is bound to the Emaclite device, or 1110 * a negative error if there is failure. 1111 */ 1112 static int xemaclite_of_probe(struct platform_device *ofdev) 1113 { 1114 struct resource *res; 1115 struct net_device *ndev = NULL; 1116 struct net_local *lp = NULL; 1117 struct device *dev = &ofdev->dev; 1118 1119 int rc = 0; 1120 1121 dev_info(dev, "Device Tree Probing\n"); 1122 1123 /* Create an ethernet device instance */ 1124 ndev = alloc_etherdev(sizeof(struct net_local)); 1125 if (!ndev) 1126 return -ENOMEM; 1127 1128 dev_set_drvdata(dev, ndev); 1129 SET_NETDEV_DEV(ndev, &ofdev->dev); 1130 1131 lp = netdev_priv(ndev); 1132 lp->ndev = ndev; 1133 1134 /* Get IRQ for the device */ 1135 res = platform_get_resource(ofdev, IORESOURCE_IRQ, 0); 1136 if (!res) { 1137 dev_err(dev, "no IRQ found\n"); 1138 rc = -ENXIO; 1139 goto error; 1140 } 1141 1142 ndev->irq = res->start; 1143 1144 res = platform_get_resource(ofdev, IORESOURCE_MEM, 0); 1145 lp->base_addr = devm_ioremap_resource(&ofdev->dev, res); 1146 if (IS_ERR(lp->base_addr)) { 1147 rc = PTR_ERR(lp->base_addr); 1148 goto error; 1149 } 1150 1151 ndev->mem_start = res->start; 1152 ndev->mem_end = res->end; 1153 1154 spin_lock_init(&lp->reset_lock); 1155 lp->next_tx_buf_to_use = 0x0; 1156 lp->next_rx_buf_to_use = 0x0; 1157 lp->tx_ping_pong = get_bool(ofdev, "xlnx,tx-ping-pong"); 1158 lp->rx_ping_pong = get_bool(ofdev, "xlnx,rx-ping-pong"); 1159 1160 rc = of_get_mac_address(ofdev->dev.of_node, ndev->dev_addr); 1161 if (rc) { 1162 dev_warn(dev, "No MAC address found, using random\n"); 1163 eth_hw_addr_random(ndev); 1164 } 1165 1166 /* Clear the Tx CSR's in case this is a restart */ 1167 xemaclite_writel(0, lp->base_addr + XEL_TSR_OFFSET); 1168 xemaclite_writel(0, lp->base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET); 1169 1170 /* Set the MAC address in the EmacLite device */ 1171 xemaclite_update_address(lp, ndev->dev_addr); 1172 1173 lp->phy_node = of_parse_phandle(ofdev->dev.of_node, "phy-handle", 0); 1174 xemaclite_mdio_setup(lp, &ofdev->dev); 1175 1176 dev_info(dev, "MAC address is now %pM\n", ndev->dev_addr); 1177 1178 ndev->netdev_ops = &xemaclite_netdev_ops; 1179 ndev->ethtool_ops = &xemaclite_ethtool_ops; 1180 ndev->flags &= ~IFF_MULTICAST; 1181 ndev->watchdog_timeo = TX_TIMEOUT; 1182 1183 /* Finally, register the device */ 1184 rc = register_netdev(ndev); 1185 if (rc) { 1186 dev_err(dev, 1187 "Cannot register network device, aborting\n"); 1188 goto error; 1189 } 1190 1191 dev_info(dev, 1192 "Xilinx EmacLite at 0x%08lX mapped to 0x%p, irq=%d\n", 1193 (unsigned long __force)ndev->mem_start, lp->base_addr, ndev->irq); 1194 return 0; 1195 1196 error: 1197 free_netdev(ndev); 1198 return rc; 1199 } 1200 1201 /** 1202 * xemaclite_of_remove - Unbind the driver from the Emaclite device. 1203 * @of_dev: Pointer to OF device structure 1204 * 1205 * This function is called if a device is physically removed from the system or 1206 * if the driver module is being unloaded. It frees any resources allocated to 1207 * the device. 1208 * 1209 * Return: 0, always. 1210 */ 1211 static int xemaclite_of_remove(struct platform_device *of_dev) 1212 { 1213 struct net_device *ndev = platform_get_drvdata(of_dev); 1214 1215 struct net_local *lp = netdev_priv(ndev); 1216 1217 /* Un-register the mii_bus, if configured */ 1218 if (lp->mii_bus) { 1219 mdiobus_unregister(lp->mii_bus); 1220 mdiobus_free(lp->mii_bus); 1221 lp->mii_bus = NULL; 1222 } 1223 1224 unregister_netdev(ndev); 1225 1226 of_node_put(lp->phy_node); 1227 lp->phy_node = NULL; 1228 1229 free_netdev(ndev); 1230 1231 return 0; 1232 } 1233 1234 #ifdef CONFIG_NET_POLL_CONTROLLER 1235 static void 1236 xemaclite_poll_controller(struct net_device *ndev) 1237 { 1238 disable_irq(ndev->irq); 1239 xemaclite_interrupt(ndev->irq, ndev); 1240 enable_irq(ndev->irq); 1241 } 1242 #endif 1243 1244 /* Ioctl MII Interface */ 1245 static int xemaclite_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) 1246 { 1247 if (!dev->phydev || !netif_running(dev)) 1248 return -EINVAL; 1249 1250 switch (cmd) { 1251 case SIOCGMIIPHY: 1252 case SIOCGMIIREG: 1253 case SIOCSMIIREG: 1254 return phy_mii_ioctl(dev->phydev, rq, cmd); 1255 default: 1256 return -EOPNOTSUPP; 1257 } 1258 } 1259 1260 static const struct net_device_ops xemaclite_netdev_ops = { 1261 .ndo_open = xemaclite_open, 1262 .ndo_stop = xemaclite_close, 1263 .ndo_start_xmit = xemaclite_send, 1264 .ndo_set_mac_address = xemaclite_set_mac_address, 1265 .ndo_tx_timeout = xemaclite_tx_timeout, 1266 .ndo_eth_ioctl = xemaclite_ioctl, 1267 #ifdef CONFIG_NET_POLL_CONTROLLER 1268 .ndo_poll_controller = xemaclite_poll_controller, 1269 #endif 1270 }; 1271 1272 /* Match table for OF platform binding */ 1273 static const struct of_device_id xemaclite_of_match[] = { 1274 { .compatible = "xlnx,opb-ethernetlite-1.01.a", }, 1275 { .compatible = "xlnx,opb-ethernetlite-1.01.b", }, 1276 { .compatible = "xlnx,xps-ethernetlite-1.00.a", }, 1277 { .compatible = "xlnx,xps-ethernetlite-2.00.a", }, 1278 { .compatible = "xlnx,xps-ethernetlite-2.01.a", }, 1279 { .compatible = "xlnx,xps-ethernetlite-3.00.a", }, 1280 { /* end of list */ }, 1281 }; 1282 MODULE_DEVICE_TABLE(of, xemaclite_of_match); 1283 1284 static struct platform_driver xemaclite_of_driver = { 1285 .driver = { 1286 .name = DRIVER_NAME, 1287 .of_match_table = xemaclite_of_match, 1288 }, 1289 .probe = xemaclite_of_probe, 1290 .remove = xemaclite_of_remove, 1291 }; 1292 1293 module_platform_driver(xemaclite_of_driver); 1294 1295 MODULE_AUTHOR("Xilinx, Inc."); 1296 MODULE_DESCRIPTION("Xilinx Ethernet MAC Lite driver"); 1297 MODULE_LICENSE("GPL"); 1298