1 /* 2 * Xilinx EmacLite Linux driver for the Xilinx Ethernet MAC Lite device. 3 * 4 * This is a new flat driver which is based on the original emac_lite 5 * driver from John Williams <john.williams@xilinx.com>. 6 * 7 * 2007 - 2013 (c) Xilinx, Inc. 8 * 9 * This program is free software; you can redistribute it and/or modify it 10 * under the terms of the GNU General Public License as published by the 11 * Free Software Foundation; either version 2 of the License, or (at your 12 * option) any later version. 13 */ 14 15 #include <linux/module.h> 16 #include <linux/uaccess.h> 17 #include <linux/netdevice.h> 18 #include <linux/etherdevice.h> 19 #include <linux/skbuff.h> 20 #include <linux/io.h> 21 #include <linux/slab.h> 22 #include <linux/of_address.h> 23 #include <linux/of_device.h> 24 #include <linux/of_platform.h> 25 #include <linux/of_mdio.h> 26 #include <linux/of_net.h> 27 #include <linux/phy.h> 28 #include <linux/interrupt.h> 29 30 #define DRIVER_NAME "xilinx_emaclite" 31 32 /* Register offsets for the EmacLite Core */ 33 #define XEL_TXBUFF_OFFSET 0x0 /* Transmit Buffer */ 34 #define XEL_MDIOADDR_OFFSET 0x07E4 /* MDIO Address Register */ 35 #define XEL_MDIOWR_OFFSET 0x07E8 /* MDIO Write Data Register */ 36 #define XEL_MDIORD_OFFSET 0x07EC /* MDIO Read Data Register */ 37 #define XEL_MDIOCTRL_OFFSET 0x07F0 /* MDIO Control Register */ 38 #define XEL_GIER_OFFSET 0x07F8 /* GIE Register */ 39 #define XEL_TSR_OFFSET 0x07FC /* Tx status */ 40 #define XEL_TPLR_OFFSET 0x07F4 /* Tx packet length */ 41 42 #define XEL_RXBUFF_OFFSET 0x1000 /* Receive Buffer */ 43 #define XEL_RPLR_OFFSET 0x100C /* Rx packet length */ 44 #define XEL_RSR_OFFSET 0x17FC /* Rx status */ 45 46 #define XEL_BUFFER_OFFSET 0x0800 /* Next Tx/Rx buffer's offset */ 47 48 /* MDIO Address Register Bit Masks */ 49 #define XEL_MDIOADDR_REGADR_MASK 0x0000001F /* Register Address */ 50 #define XEL_MDIOADDR_PHYADR_MASK 0x000003E0 /* PHY Address */ 51 #define XEL_MDIOADDR_PHYADR_SHIFT 5 52 #define XEL_MDIOADDR_OP_MASK 0x00000400 /* RD/WR Operation */ 53 54 /* MDIO Write Data Register Bit Masks */ 55 #define XEL_MDIOWR_WRDATA_MASK 0x0000FFFF /* Data to be Written */ 56 57 /* MDIO Read Data Register Bit Masks */ 58 #define XEL_MDIORD_RDDATA_MASK 0x0000FFFF /* Data to be Read */ 59 60 /* MDIO Control Register Bit Masks */ 61 #define XEL_MDIOCTRL_MDIOSTS_MASK 0x00000001 /* MDIO Status Mask */ 62 #define XEL_MDIOCTRL_MDIOEN_MASK 0x00000008 /* MDIO Enable */ 63 64 /* Global Interrupt Enable Register (GIER) Bit Masks */ 65 #define XEL_GIER_GIE_MASK 0x80000000 /* Global Enable */ 66 67 /* Transmit Status Register (TSR) Bit Masks */ 68 #define XEL_TSR_XMIT_BUSY_MASK 0x00000001 /* Tx complete */ 69 #define XEL_TSR_PROGRAM_MASK 0x00000002 /* Program the MAC address */ 70 #define XEL_TSR_XMIT_IE_MASK 0x00000008 /* Tx interrupt enable bit */ 71 #define XEL_TSR_XMIT_ACTIVE_MASK 0x80000000 /* Buffer is active, SW bit 72 * only. This is not documented 73 * in the HW spec */ 74 75 /* Define for programming the MAC address into the EmacLite */ 76 #define XEL_TSR_PROG_MAC_ADDR (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_PROGRAM_MASK) 77 78 /* Receive Status Register (RSR) */ 79 #define XEL_RSR_RECV_DONE_MASK 0x00000001 /* Rx complete */ 80 #define XEL_RSR_RECV_IE_MASK 0x00000008 /* Rx interrupt enable bit */ 81 82 /* Transmit Packet Length Register (TPLR) */ 83 #define XEL_TPLR_LENGTH_MASK 0x0000FFFF /* Tx packet length */ 84 85 /* Receive Packet Length Register (RPLR) */ 86 #define XEL_RPLR_LENGTH_MASK 0x0000FFFF /* Rx packet length */ 87 88 #define XEL_HEADER_OFFSET 12 /* Offset to length field */ 89 #define XEL_HEADER_SHIFT 16 /* Shift value for length */ 90 91 /* General Ethernet Definitions */ 92 #define XEL_ARP_PACKET_SIZE 28 /* Max ARP packet size */ 93 #define XEL_HEADER_IP_LENGTH_OFFSET 16 /* IP Length Offset */ 94 95 96 97 #define TX_TIMEOUT (60*HZ) /* Tx timeout is 60 seconds. */ 98 #define ALIGNMENT 4 99 100 /* BUFFER_ALIGN(adr) calculates the number of bytes to the next alignment. */ 101 #define BUFFER_ALIGN(adr) ((ALIGNMENT - ((u32) adr)) % ALIGNMENT) 102 103 /** 104 * struct net_local - Our private per device data 105 * @ndev: instance of the network device 106 * @tx_ping_pong: indicates whether Tx Pong buffer is configured in HW 107 * @rx_ping_pong: indicates whether Rx Pong buffer is configured in HW 108 * @next_tx_buf_to_use: next Tx buffer to write to 109 * @next_rx_buf_to_use: next Rx buffer to read from 110 * @base_addr: base address of the Emaclite device 111 * @reset_lock: lock used for synchronization 112 * @deferred_skb: holds an skb (for transmission at a later time) when the 113 * Tx buffer is not free 114 * @phy_dev: pointer to the PHY device 115 * @phy_node: pointer to the PHY device node 116 * @mii_bus: pointer to the MII bus 117 * @mdio_irqs: IRQs table for MDIO bus 118 * @last_link: last link status 119 * @has_mdio: indicates whether MDIO is included in the HW 120 */ 121 struct net_local { 122 123 struct net_device *ndev; 124 125 bool tx_ping_pong; 126 bool rx_ping_pong; 127 u32 next_tx_buf_to_use; 128 u32 next_rx_buf_to_use; 129 void __iomem *base_addr; 130 131 spinlock_t reset_lock; 132 struct sk_buff *deferred_skb; 133 134 struct phy_device *phy_dev; 135 struct device_node *phy_node; 136 137 struct mii_bus *mii_bus; 138 int mdio_irqs[PHY_MAX_ADDR]; 139 140 int last_link; 141 bool has_mdio; 142 }; 143 144 145 /*************************/ 146 /* EmacLite driver calls */ 147 /*************************/ 148 149 /** 150 * xemaclite_enable_interrupts - Enable the interrupts for the EmacLite device 151 * @drvdata: Pointer to the Emaclite device private data 152 * 153 * This function enables the Tx and Rx interrupts for the Emaclite device along 154 * with the Global Interrupt Enable. 155 */ 156 static void xemaclite_enable_interrupts(struct net_local *drvdata) 157 { 158 u32 reg_data; 159 160 /* Enable the Tx interrupts for the first Buffer */ 161 reg_data = __raw_readl(drvdata->base_addr + XEL_TSR_OFFSET); 162 __raw_writel(reg_data | XEL_TSR_XMIT_IE_MASK, 163 drvdata->base_addr + XEL_TSR_OFFSET); 164 165 /* Enable the Rx interrupts for the first buffer */ 166 __raw_writel(XEL_RSR_RECV_IE_MASK, drvdata->base_addr + XEL_RSR_OFFSET); 167 168 /* Enable the Global Interrupt Enable */ 169 __raw_writel(XEL_GIER_GIE_MASK, drvdata->base_addr + XEL_GIER_OFFSET); 170 } 171 172 /** 173 * xemaclite_disable_interrupts - Disable the interrupts for the EmacLite device 174 * @drvdata: Pointer to the Emaclite device private data 175 * 176 * This function disables the Tx and Rx interrupts for the Emaclite device, 177 * along with the Global Interrupt Enable. 178 */ 179 static void xemaclite_disable_interrupts(struct net_local *drvdata) 180 { 181 u32 reg_data; 182 183 /* Disable the Global Interrupt Enable */ 184 __raw_writel(XEL_GIER_GIE_MASK, drvdata->base_addr + XEL_GIER_OFFSET); 185 186 /* Disable the Tx interrupts for the first buffer */ 187 reg_data = __raw_readl(drvdata->base_addr + XEL_TSR_OFFSET); 188 __raw_writel(reg_data & (~XEL_TSR_XMIT_IE_MASK), 189 drvdata->base_addr + XEL_TSR_OFFSET); 190 191 /* Disable the Rx interrupts for the first buffer */ 192 reg_data = __raw_readl(drvdata->base_addr + XEL_RSR_OFFSET); 193 __raw_writel(reg_data & (~XEL_RSR_RECV_IE_MASK), 194 drvdata->base_addr + XEL_RSR_OFFSET); 195 } 196 197 /** 198 * xemaclite_aligned_write - Write from 16-bit aligned to 32-bit aligned address 199 * @src_ptr: Void pointer to the 16-bit aligned source address 200 * @dest_ptr: Pointer to the 32-bit aligned destination address 201 * @length: Number bytes to write from source to destination 202 * 203 * This function writes data from a 16-bit aligned buffer to a 32-bit aligned 204 * address in the EmacLite device. 205 */ 206 static void xemaclite_aligned_write(void *src_ptr, u32 *dest_ptr, 207 unsigned length) 208 { 209 u32 align_buffer; 210 u32 *to_u32_ptr; 211 u16 *from_u16_ptr, *to_u16_ptr; 212 213 to_u32_ptr = dest_ptr; 214 from_u16_ptr = src_ptr; 215 align_buffer = 0; 216 217 for (; length > 3; length -= 4) { 218 to_u16_ptr = (u16 *)&align_buffer; 219 *to_u16_ptr++ = *from_u16_ptr++; 220 *to_u16_ptr++ = *from_u16_ptr++; 221 222 /* This barrier resolves occasional issues seen around 223 * cases where the data is not properly flushed out 224 * from the processor store buffers to the destination 225 * memory locations. 226 */ 227 wmb(); 228 229 /* Output a word */ 230 *to_u32_ptr++ = align_buffer; 231 } 232 if (length) { 233 u8 *from_u8_ptr, *to_u8_ptr; 234 235 /* Set up to output the remaining data */ 236 align_buffer = 0; 237 to_u8_ptr = (u8 *) &align_buffer; 238 from_u8_ptr = (u8 *) from_u16_ptr; 239 240 /* Output the remaining data */ 241 for (; length > 0; length--) 242 *to_u8_ptr++ = *from_u8_ptr++; 243 244 /* This barrier resolves occasional issues seen around 245 * cases where the data is not properly flushed out 246 * from the processor store buffers to the destination 247 * memory locations. 248 */ 249 wmb(); 250 *to_u32_ptr = align_buffer; 251 } 252 } 253 254 /** 255 * xemaclite_aligned_read - Read from 32-bit aligned to 16-bit aligned buffer 256 * @src_ptr: Pointer to the 32-bit aligned source address 257 * @dest_ptr: Pointer to the 16-bit aligned destination address 258 * @length: Number bytes to read from source to destination 259 * 260 * This function reads data from a 32-bit aligned address in the EmacLite device 261 * to a 16-bit aligned buffer. 262 */ 263 static void xemaclite_aligned_read(u32 *src_ptr, u8 *dest_ptr, 264 unsigned length) 265 { 266 u16 *to_u16_ptr, *from_u16_ptr; 267 u32 *from_u32_ptr; 268 u32 align_buffer; 269 270 from_u32_ptr = src_ptr; 271 to_u16_ptr = (u16 *) dest_ptr; 272 273 for (; length > 3; length -= 4) { 274 /* Copy each word into the temporary buffer */ 275 align_buffer = *from_u32_ptr++; 276 from_u16_ptr = (u16 *)&align_buffer; 277 278 /* Read data from source */ 279 *to_u16_ptr++ = *from_u16_ptr++; 280 *to_u16_ptr++ = *from_u16_ptr++; 281 } 282 283 if (length) { 284 u8 *to_u8_ptr, *from_u8_ptr; 285 286 /* Set up to read the remaining data */ 287 to_u8_ptr = (u8 *) to_u16_ptr; 288 align_buffer = *from_u32_ptr++; 289 from_u8_ptr = (u8 *) &align_buffer; 290 291 /* Read the remaining data */ 292 for (; length > 0; length--) 293 *to_u8_ptr = *from_u8_ptr; 294 } 295 } 296 297 /** 298 * xemaclite_send_data - Send an Ethernet frame 299 * @drvdata: Pointer to the Emaclite device private data 300 * @data: Pointer to the data to be sent 301 * @byte_count: Total frame size, including header 302 * 303 * This function checks if the Tx buffer of the Emaclite device is free to send 304 * data. If so, it fills the Tx buffer with data for transmission. Otherwise, it 305 * returns an error. 306 * 307 * Return: 0 upon success or -1 if the buffer(s) are full. 308 * 309 * Note: The maximum Tx packet size can not be more than Ethernet header 310 * (14 Bytes) + Maximum MTU (1500 bytes). This is excluding FCS. 311 */ 312 static int xemaclite_send_data(struct net_local *drvdata, u8 *data, 313 unsigned int byte_count) 314 { 315 u32 reg_data; 316 void __iomem *addr; 317 318 /* Determine the expected Tx buffer address */ 319 addr = drvdata->base_addr + drvdata->next_tx_buf_to_use; 320 321 /* If the length is too large, truncate it */ 322 if (byte_count > ETH_FRAME_LEN) 323 byte_count = ETH_FRAME_LEN; 324 325 /* Check if the expected buffer is available */ 326 reg_data = __raw_readl(addr + XEL_TSR_OFFSET); 327 if ((reg_data & (XEL_TSR_XMIT_BUSY_MASK | 328 XEL_TSR_XMIT_ACTIVE_MASK)) == 0) { 329 330 /* Switch to next buffer if configured */ 331 if (drvdata->tx_ping_pong != 0) 332 drvdata->next_tx_buf_to_use ^= XEL_BUFFER_OFFSET; 333 } else if (drvdata->tx_ping_pong != 0) { 334 /* If the expected buffer is full, try the other buffer, 335 * if it is configured in HW */ 336 337 addr = (void __iomem __force *)((u32 __force)addr ^ 338 XEL_BUFFER_OFFSET); 339 reg_data = __raw_readl(addr + XEL_TSR_OFFSET); 340 341 if ((reg_data & (XEL_TSR_XMIT_BUSY_MASK | 342 XEL_TSR_XMIT_ACTIVE_MASK)) != 0) 343 return -1; /* Buffers were full, return failure */ 344 } else 345 return -1; /* Buffer was full, return failure */ 346 347 /* Write the frame to the buffer */ 348 xemaclite_aligned_write(data, (u32 __force *) addr, byte_count); 349 350 __raw_writel((byte_count & XEL_TPLR_LENGTH_MASK), 351 addr + XEL_TPLR_OFFSET); 352 353 /* Update the Tx Status Register to indicate that there is a 354 * frame to send. Set the XEL_TSR_XMIT_ACTIVE_MASK flag which 355 * is used by the interrupt handler to check whether a frame 356 * has been transmitted */ 357 reg_data = __raw_readl(addr + XEL_TSR_OFFSET); 358 reg_data |= (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_XMIT_ACTIVE_MASK); 359 __raw_writel(reg_data, addr + XEL_TSR_OFFSET); 360 361 return 0; 362 } 363 364 /** 365 * xemaclite_recv_data - Receive a frame 366 * @drvdata: Pointer to the Emaclite device private data 367 * @data: Address where the data is to be received 368 * 369 * This function is intended to be called from the interrupt context or 370 * with a wrapper which waits for the receive frame to be available. 371 * 372 * Return: Total number of bytes received 373 */ 374 static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data) 375 { 376 void __iomem *addr; 377 u16 length, proto_type; 378 u32 reg_data; 379 380 /* Determine the expected buffer address */ 381 addr = (drvdata->base_addr + drvdata->next_rx_buf_to_use); 382 383 /* Verify which buffer has valid data */ 384 reg_data = __raw_readl(addr + XEL_RSR_OFFSET); 385 386 if ((reg_data & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) { 387 if (drvdata->rx_ping_pong != 0) 388 drvdata->next_rx_buf_to_use ^= XEL_BUFFER_OFFSET; 389 } else { 390 /* The instance is out of sync, try other buffer if other 391 * buffer is configured, return 0 otherwise. If the instance is 392 * out of sync, do not update the 'next_rx_buf_to_use' since it 393 * will correct on subsequent calls */ 394 if (drvdata->rx_ping_pong != 0) 395 addr = (void __iomem __force *)((u32 __force)addr ^ 396 XEL_BUFFER_OFFSET); 397 else 398 return 0; /* No data was available */ 399 400 /* Verify that buffer has valid data */ 401 reg_data = __raw_readl(addr + XEL_RSR_OFFSET); 402 if ((reg_data & XEL_RSR_RECV_DONE_MASK) != 403 XEL_RSR_RECV_DONE_MASK) 404 return 0; /* No data was available */ 405 } 406 407 /* Get the protocol type of the ethernet frame that arrived */ 408 proto_type = ((ntohl(__raw_readl(addr + XEL_HEADER_OFFSET + 409 XEL_RXBUFF_OFFSET)) >> XEL_HEADER_SHIFT) & 410 XEL_RPLR_LENGTH_MASK); 411 412 /* Check if received ethernet frame is a raw ethernet frame 413 * or an IP packet or an ARP packet */ 414 if (proto_type > (ETH_FRAME_LEN + ETH_FCS_LEN)) { 415 416 if (proto_type == ETH_P_IP) { 417 length = ((ntohl(__raw_readl(addr + 418 XEL_HEADER_IP_LENGTH_OFFSET + 419 XEL_RXBUFF_OFFSET)) >> 420 XEL_HEADER_SHIFT) & 421 XEL_RPLR_LENGTH_MASK); 422 length += ETH_HLEN + ETH_FCS_LEN; 423 424 } else if (proto_type == ETH_P_ARP) 425 length = XEL_ARP_PACKET_SIZE + ETH_HLEN + ETH_FCS_LEN; 426 else 427 /* Field contains type other than IP or ARP, use max 428 * frame size and let user parse it */ 429 length = ETH_FRAME_LEN + ETH_FCS_LEN; 430 } else 431 /* Use the length in the frame, plus the header and trailer */ 432 length = proto_type + ETH_HLEN + ETH_FCS_LEN; 433 434 /* Read from the EmacLite device */ 435 xemaclite_aligned_read((u32 __force *) (addr + XEL_RXBUFF_OFFSET), 436 data, length); 437 438 /* Acknowledge the frame */ 439 reg_data = __raw_readl(addr + XEL_RSR_OFFSET); 440 reg_data &= ~XEL_RSR_RECV_DONE_MASK; 441 __raw_writel(reg_data, addr + XEL_RSR_OFFSET); 442 443 return length; 444 } 445 446 /** 447 * xemaclite_update_address - Update the MAC address in the device 448 * @drvdata: Pointer to the Emaclite device private data 449 * @address_ptr:Pointer to the MAC address (MAC address is a 48-bit value) 450 * 451 * Tx must be idle and Rx should be idle for deterministic results. 452 * It is recommended that this function should be called after the 453 * initialization and before transmission of any packets from the device. 454 * The MAC address can be programmed using any of the two transmit 455 * buffers (if configured). 456 */ 457 static void xemaclite_update_address(struct net_local *drvdata, 458 u8 *address_ptr) 459 { 460 void __iomem *addr; 461 u32 reg_data; 462 463 /* Determine the expected Tx buffer address */ 464 addr = drvdata->base_addr + drvdata->next_tx_buf_to_use; 465 466 xemaclite_aligned_write(address_ptr, (u32 __force *) addr, ETH_ALEN); 467 468 __raw_writel(ETH_ALEN, addr + XEL_TPLR_OFFSET); 469 470 /* Update the MAC address in the EmacLite */ 471 reg_data = __raw_readl(addr + XEL_TSR_OFFSET); 472 __raw_writel(reg_data | XEL_TSR_PROG_MAC_ADDR, addr + XEL_TSR_OFFSET); 473 474 /* Wait for EmacLite to finish with the MAC address update */ 475 while ((__raw_readl(addr + XEL_TSR_OFFSET) & 476 XEL_TSR_PROG_MAC_ADDR) != 0) 477 ; 478 } 479 480 /** 481 * xemaclite_set_mac_address - Set the MAC address for this device 482 * @dev: Pointer to the network device instance 483 * @addr: Void pointer to the sockaddr structure 484 * 485 * This function copies the HW address from the sockaddr strucutre to the 486 * net_device structure and updates the address in HW. 487 * 488 * Return: Error if the net device is busy or 0 if the addr is set 489 * successfully 490 */ 491 static int xemaclite_set_mac_address(struct net_device *dev, void *address) 492 { 493 struct net_local *lp = netdev_priv(dev); 494 struct sockaddr *addr = address; 495 496 if (netif_running(dev)) 497 return -EBUSY; 498 499 memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); 500 xemaclite_update_address(lp, dev->dev_addr); 501 return 0; 502 } 503 504 /** 505 * xemaclite_tx_timeout - Callback for Tx Timeout 506 * @dev: Pointer to the network device 507 * 508 * This function is called when Tx time out occurs for Emaclite device. 509 */ 510 static void xemaclite_tx_timeout(struct net_device *dev) 511 { 512 struct net_local *lp = netdev_priv(dev); 513 unsigned long flags; 514 515 dev_err(&lp->ndev->dev, "Exceeded transmit timeout of %lu ms\n", 516 TX_TIMEOUT * 1000UL / HZ); 517 518 dev->stats.tx_errors++; 519 520 /* Reset the device */ 521 spin_lock_irqsave(&lp->reset_lock, flags); 522 523 /* Shouldn't really be necessary, but shouldn't hurt */ 524 netif_stop_queue(dev); 525 526 xemaclite_disable_interrupts(lp); 527 xemaclite_enable_interrupts(lp); 528 529 if (lp->deferred_skb) { 530 dev_kfree_skb(lp->deferred_skb); 531 lp->deferred_skb = NULL; 532 dev->stats.tx_errors++; 533 } 534 535 /* To exclude tx timeout */ 536 dev->trans_start = jiffies; /* prevent tx timeout */ 537 538 /* We're all ready to go. Start the queue */ 539 netif_wake_queue(dev); 540 spin_unlock_irqrestore(&lp->reset_lock, flags); 541 } 542 543 /**********************/ 544 /* Interrupt Handlers */ 545 /**********************/ 546 547 /** 548 * xemaclite_tx_handler - Interrupt handler for frames sent 549 * @dev: Pointer to the network device 550 * 551 * This function updates the number of packets transmitted and handles the 552 * deferred skb, if there is one. 553 */ 554 static void xemaclite_tx_handler(struct net_device *dev) 555 { 556 struct net_local *lp = netdev_priv(dev); 557 558 dev->stats.tx_packets++; 559 if (lp->deferred_skb) { 560 if (xemaclite_send_data(lp, 561 (u8 *) lp->deferred_skb->data, 562 lp->deferred_skb->len) != 0) 563 return; 564 else { 565 dev->stats.tx_bytes += lp->deferred_skb->len; 566 dev_kfree_skb_irq(lp->deferred_skb); 567 lp->deferred_skb = NULL; 568 dev->trans_start = jiffies; /* prevent tx timeout */ 569 netif_wake_queue(dev); 570 } 571 } 572 } 573 574 /** 575 * xemaclite_rx_handler- Interrupt handler for frames received 576 * @dev: Pointer to the network device 577 * 578 * This function allocates memory for a socket buffer, fills it with data 579 * received and hands it over to the TCP/IP stack. 580 */ 581 static void xemaclite_rx_handler(struct net_device *dev) 582 { 583 struct net_local *lp = netdev_priv(dev); 584 struct sk_buff *skb; 585 unsigned int align; 586 u32 len; 587 588 len = ETH_FRAME_LEN + ETH_FCS_LEN; 589 skb = netdev_alloc_skb(dev, len + ALIGNMENT); 590 if (!skb) { 591 /* Couldn't get memory. */ 592 dev->stats.rx_dropped++; 593 dev_err(&lp->ndev->dev, "Could not allocate receive buffer\n"); 594 return; 595 } 596 597 /* 598 * A new skb should have the data halfword aligned, but this code is 599 * here just in case that isn't true. Calculate how many 600 * bytes we should reserve to get the data to start on a word 601 * boundary */ 602 align = BUFFER_ALIGN(skb->data); 603 if (align) 604 skb_reserve(skb, align); 605 606 skb_reserve(skb, 2); 607 608 len = xemaclite_recv_data(lp, (u8 *) skb->data); 609 610 if (!len) { 611 dev->stats.rx_errors++; 612 dev_kfree_skb_irq(skb); 613 return; 614 } 615 616 skb_put(skb, len); /* Tell the skb how much data we got */ 617 618 skb->protocol = eth_type_trans(skb, dev); 619 skb_checksum_none_assert(skb); 620 621 dev->stats.rx_packets++; 622 dev->stats.rx_bytes += len; 623 624 if (!skb_defer_rx_timestamp(skb)) 625 netif_rx(skb); /* Send the packet upstream */ 626 } 627 628 /** 629 * xemaclite_interrupt - Interrupt handler for this driver 630 * @irq: Irq of the Emaclite device 631 * @dev_id: Void pointer to the network device instance used as callback 632 * reference 633 * 634 * This function handles the Tx and Rx interrupts of the EmacLite device. 635 */ 636 static irqreturn_t xemaclite_interrupt(int irq, void *dev_id) 637 { 638 bool tx_complete = false; 639 struct net_device *dev = dev_id; 640 struct net_local *lp = netdev_priv(dev); 641 void __iomem *base_addr = lp->base_addr; 642 u32 tx_status; 643 644 /* Check if there is Rx Data available */ 645 if ((__raw_readl(base_addr + XEL_RSR_OFFSET) & 646 XEL_RSR_RECV_DONE_MASK) || 647 (__raw_readl(base_addr + XEL_BUFFER_OFFSET + XEL_RSR_OFFSET) 648 & XEL_RSR_RECV_DONE_MASK)) 649 650 xemaclite_rx_handler(dev); 651 652 /* Check if the Transmission for the first buffer is completed */ 653 tx_status = __raw_readl(base_addr + XEL_TSR_OFFSET); 654 if (((tx_status & XEL_TSR_XMIT_BUSY_MASK) == 0) && 655 (tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) { 656 657 tx_status &= ~XEL_TSR_XMIT_ACTIVE_MASK; 658 __raw_writel(tx_status, base_addr + XEL_TSR_OFFSET); 659 660 tx_complete = true; 661 } 662 663 /* Check if the Transmission for the second buffer is completed */ 664 tx_status = __raw_readl(base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET); 665 if (((tx_status & XEL_TSR_XMIT_BUSY_MASK) == 0) && 666 (tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) { 667 668 tx_status &= ~XEL_TSR_XMIT_ACTIVE_MASK; 669 __raw_writel(tx_status, base_addr + XEL_BUFFER_OFFSET + 670 XEL_TSR_OFFSET); 671 672 tx_complete = true; 673 } 674 675 /* If there was a Tx interrupt, call the Tx Handler */ 676 if (tx_complete != 0) 677 xemaclite_tx_handler(dev); 678 679 return IRQ_HANDLED; 680 } 681 682 /**********************/ 683 /* MDIO Bus functions */ 684 /**********************/ 685 686 /** 687 * xemaclite_mdio_wait - Wait for the MDIO to be ready to use 688 * @lp: Pointer to the Emaclite device private data 689 * 690 * This function waits till the device is ready to accept a new MDIO 691 * request. 692 * 693 * Return: 0 for success or ETIMEDOUT for a timeout 694 */ 695 696 static int xemaclite_mdio_wait(struct net_local *lp) 697 { 698 unsigned long end = jiffies + 2; 699 700 /* wait for the MDIO interface to not be busy or timeout 701 after some time. 702 */ 703 while (__raw_readl(lp->base_addr + XEL_MDIOCTRL_OFFSET) & 704 XEL_MDIOCTRL_MDIOSTS_MASK) { 705 if (time_before_eq(end, jiffies)) { 706 WARN_ON(1); 707 return -ETIMEDOUT; 708 } 709 msleep(1); 710 } 711 return 0; 712 } 713 714 /** 715 * xemaclite_mdio_read - Read from a given MII management register 716 * @bus: the mii_bus struct 717 * @phy_id: the phy address 718 * @reg: register number to read from 719 * 720 * This function waits till the device is ready to accept a new MDIO 721 * request and then writes the phy address to the MDIO Address register 722 * and reads data from MDIO Read Data register, when its available. 723 * 724 * Return: Value read from the MII management register 725 */ 726 static int xemaclite_mdio_read(struct mii_bus *bus, int phy_id, int reg) 727 { 728 struct net_local *lp = bus->priv; 729 u32 ctrl_reg; 730 u32 rc; 731 732 if (xemaclite_mdio_wait(lp)) 733 return -ETIMEDOUT; 734 735 /* Write the PHY address, register number and set the OP bit in the 736 * MDIO Address register. Set the Status bit in the MDIO Control 737 * register to start a MDIO read transaction. 738 */ 739 ctrl_reg = __raw_readl(lp->base_addr + XEL_MDIOCTRL_OFFSET); 740 __raw_writel(XEL_MDIOADDR_OP_MASK | 741 ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg), 742 lp->base_addr + XEL_MDIOADDR_OFFSET); 743 __raw_writel(ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK, 744 lp->base_addr + XEL_MDIOCTRL_OFFSET); 745 746 if (xemaclite_mdio_wait(lp)) 747 return -ETIMEDOUT; 748 749 rc = __raw_readl(lp->base_addr + XEL_MDIORD_OFFSET); 750 751 dev_dbg(&lp->ndev->dev, 752 "xemaclite_mdio_read(phy_id=%i, reg=%x) == %x\n", 753 phy_id, reg, rc); 754 755 return rc; 756 } 757 758 /** 759 * xemaclite_mdio_write - Write to a given MII management register 760 * @bus: the mii_bus struct 761 * @phy_id: the phy address 762 * @reg: register number to write to 763 * @val: value to write to the register number specified by reg 764 * 765 * This function waits till the device is ready to accept a new MDIO 766 * request and then writes the val to the MDIO Write Data register. 767 */ 768 static int xemaclite_mdio_write(struct mii_bus *bus, int phy_id, int reg, 769 u16 val) 770 { 771 struct net_local *lp = bus->priv; 772 u32 ctrl_reg; 773 774 dev_dbg(&lp->ndev->dev, 775 "xemaclite_mdio_write(phy_id=%i, reg=%x, val=%x)\n", 776 phy_id, reg, val); 777 778 if (xemaclite_mdio_wait(lp)) 779 return -ETIMEDOUT; 780 781 /* Write the PHY address, register number and clear the OP bit in the 782 * MDIO Address register and then write the value into the MDIO Write 783 * Data register. Finally, set the Status bit in the MDIO Control 784 * register to start a MDIO write transaction. 785 */ 786 ctrl_reg = __raw_readl(lp->base_addr + XEL_MDIOCTRL_OFFSET); 787 __raw_writel(~XEL_MDIOADDR_OP_MASK & 788 ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg), 789 lp->base_addr + XEL_MDIOADDR_OFFSET); 790 __raw_writel(val, lp->base_addr + XEL_MDIOWR_OFFSET); 791 __raw_writel(ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK, 792 lp->base_addr + XEL_MDIOCTRL_OFFSET); 793 794 return 0; 795 } 796 797 /** 798 * xemaclite_mdio_setup - Register mii_bus for the Emaclite device 799 * @lp: Pointer to the Emaclite device private data 800 * @ofdev: Pointer to OF device structure 801 * 802 * This function enables MDIO bus in the Emaclite device and registers a 803 * mii_bus. 804 * 805 * Return: 0 upon success or a negative error upon failure 806 */ 807 static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev) 808 { 809 struct mii_bus *bus; 810 int rc; 811 struct resource res; 812 struct device_node *np = of_get_parent(lp->phy_node); 813 struct device_node *npp; 814 815 /* Don't register the MDIO bus if the phy_node or its parent node 816 * can't be found. 817 */ 818 if (!np) { 819 dev_err(dev, "Failed to register mdio bus.\n"); 820 return -ENODEV; 821 } 822 npp = of_get_parent(np); 823 824 of_address_to_resource(npp, 0, &res); 825 if (lp->ndev->mem_start != res.start) { 826 struct phy_device *phydev; 827 phydev = of_phy_find_device(lp->phy_node); 828 if (!phydev) 829 dev_info(dev, 830 "MDIO of the phy is not registered yet\n"); 831 else 832 put_device(&phydev->dev); 833 return 0; 834 } 835 836 /* Enable the MDIO bus by asserting the enable bit in MDIO Control 837 * register. 838 */ 839 __raw_writel(XEL_MDIOCTRL_MDIOEN_MASK, 840 lp->base_addr + XEL_MDIOCTRL_OFFSET); 841 842 bus = mdiobus_alloc(); 843 if (!bus) { 844 dev_err(dev, "Failed to allocate mdiobus\n"); 845 return -ENOMEM; 846 } 847 848 snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx", 849 (unsigned long long)res.start); 850 bus->priv = lp; 851 bus->name = "Xilinx Emaclite MDIO"; 852 bus->read = xemaclite_mdio_read; 853 bus->write = xemaclite_mdio_write; 854 bus->parent = dev; 855 bus->irq = lp->mdio_irqs; /* preallocated IRQ table */ 856 857 lp->mii_bus = bus; 858 859 rc = of_mdiobus_register(bus, np); 860 if (rc) { 861 dev_err(dev, "Failed to register mdio bus.\n"); 862 goto err_register; 863 } 864 865 return 0; 866 867 err_register: 868 mdiobus_free(bus); 869 return rc; 870 } 871 872 /** 873 * xemaclite_adjust_link - Link state callback for the Emaclite device 874 * @ndev: pointer to net_device struct 875 * 876 * There's nothing in the Emaclite device to be configured when the link 877 * state changes. We just print the status. 878 */ 879 static void xemaclite_adjust_link(struct net_device *ndev) 880 { 881 struct net_local *lp = netdev_priv(ndev); 882 struct phy_device *phy = lp->phy_dev; 883 int link_state; 884 885 /* hash together the state values to decide if something has changed */ 886 link_state = phy->speed | (phy->duplex << 1) | phy->link; 887 888 if (lp->last_link != link_state) { 889 lp->last_link = link_state; 890 phy_print_status(phy); 891 } 892 } 893 894 /** 895 * xemaclite_open - Open the network device 896 * @dev: Pointer to the network device 897 * 898 * This function sets the MAC address, requests an IRQ and enables interrupts 899 * for the Emaclite device and starts the Tx queue. 900 * It also connects to the phy device, if MDIO is included in Emaclite device. 901 */ 902 static int xemaclite_open(struct net_device *dev) 903 { 904 struct net_local *lp = netdev_priv(dev); 905 int retval; 906 907 /* Just to be safe, stop the device first */ 908 xemaclite_disable_interrupts(lp); 909 910 if (lp->phy_node) { 911 u32 bmcr; 912 913 lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node, 914 xemaclite_adjust_link, 0, 915 PHY_INTERFACE_MODE_MII); 916 if (!lp->phy_dev) { 917 dev_err(&lp->ndev->dev, "of_phy_connect() failed\n"); 918 return -ENODEV; 919 } 920 921 /* EmacLite doesn't support giga-bit speeds */ 922 lp->phy_dev->supported &= (PHY_BASIC_FEATURES); 923 lp->phy_dev->advertising = lp->phy_dev->supported; 924 925 /* Don't advertise 1000BASE-T Full/Half duplex speeds */ 926 phy_write(lp->phy_dev, MII_CTRL1000, 0); 927 928 /* Advertise only 10 and 100mbps full/half duplex speeds */ 929 phy_write(lp->phy_dev, MII_ADVERTISE, ADVERTISE_ALL | 930 ADVERTISE_CSMA); 931 932 /* Restart auto negotiation */ 933 bmcr = phy_read(lp->phy_dev, MII_BMCR); 934 bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART); 935 phy_write(lp->phy_dev, MII_BMCR, bmcr); 936 937 phy_start(lp->phy_dev); 938 } 939 940 /* Set the MAC address each time opened */ 941 xemaclite_update_address(lp, dev->dev_addr); 942 943 /* Grab the IRQ */ 944 retval = request_irq(dev->irq, xemaclite_interrupt, 0, dev->name, dev); 945 if (retval) { 946 dev_err(&lp->ndev->dev, "Could not allocate interrupt %d\n", 947 dev->irq); 948 if (lp->phy_dev) 949 phy_disconnect(lp->phy_dev); 950 lp->phy_dev = NULL; 951 952 return retval; 953 } 954 955 /* Enable Interrupts */ 956 xemaclite_enable_interrupts(lp); 957 958 /* We're ready to go */ 959 netif_start_queue(dev); 960 961 return 0; 962 } 963 964 /** 965 * xemaclite_close - Close the network device 966 * @dev: Pointer to the network device 967 * 968 * This function stops the Tx queue, disables interrupts and frees the IRQ for 969 * the Emaclite device. 970 * It also disconnects the phy device associated with the Emaclite device. 971 */ 972 static int xemaclite_close(struct net_device *dev) 973 { 974 struct net_local *lp = netdev_priv(dev); 975 976 netif_stop_queue(dev); 977 xemaclite_disable_interrupts(lp); 978 free_irq(dev->irq, dev); 979 980 if (lp->phy_dev) 981 phy_disconnect(lp->phy_dev); 982 lp->phy_dev = NULL; 983 984 return 0; 985 } 986 987 /** 988 * xemaclite_send - Transmit a frame 989 * @orig_skb: Pointer to the socket buffer to be transmitted 990 * @dev: Pointer to the network device 991 * 992 * This function checks if the Tx buffer of the Emaclite device is free to send 993 * data. If so, it fills the Tx buffer with data from socket buffer data, 994 * updates the stats and frees the socket buffer. The Tx completion is signaled 995 * by an interrupt. If the Tx buffer isn't free, then the socket buffer is 996 * deferred and the Tx queue is stopped so that the deferred socket buffer can 997 * be transmitted when the Emaclite device is free to transmit data. 998 * 999 * Return: 0, always. 1000 */ 1001 static int xemaclite_send(struct sk_buff *orig_skb, struct net_device *dev) 1002 { 1003 struct net_local *lp = netdev_priv(dev); 1004 struct sk_buff *new_skb; 1005 unsigned int len; 1006 unsigned long flags; 1007 1008 len = orig_skb->len; 1009 1010 new_skb = orig_skb; 1011 1012 spin_lock_irqsave(&lp->reset_lock, flags); 1013 if (xemaclite_send_data(lp, (u8 *) new_skb->data, len) != 0) { 1014 /* If the Emaclite Tx buffer is busy, stop the Tx queue and 1015 * defer the skb for transmission during the ISR, after the 1016 * current transmission is complete */ 1017 netif_stop_queue(dev); 1018 lp->deferred_skb = new_skb; 1019 /* Take the time stamp now, since we can't do this in an ISR. */ 1020 skb_tx_timestamp(new_skb); 1021 spin_unlock_irqrestore(&lp->reset_lock, flags); 1022 return 0; 1023 } 1024 spin_unlock_irqrestore(&lp->reset_lock, flags); 1025 1026 skb_tx_timestamp(new_skb); 1027 1028 dev->stats.tx_bytes += len; 1029 dev_consume_skb_any(new_skb); 1030 1031 return 0; 1032 } 1033 1034 /** 1035 * xemaclite_remove_ndev - Free the network device 1036 * @ndev: Pointer to the network device to be freed 1037 * 1038 * This function un maps the IO region of the Emaclite device and frees the net 1039 * device. 1040 */ 1041 static void xemaclite_remove_ndev(struct net_device *ndev) 1042 { 1043 if (ndev) { 1044 free_netdev(ndev); 1045 } 1046 } 1047 1048 /** 1049 * get_bool - Get a parameter from the OF device 1050 * @ofdev: Pointer to OF device structure 1051 * @s: Property to be retrieved 1052 * 1053 * This function looks for a property in the device node and returns the value 1054 * of the property if its found or 0 if the property is not found. 1055 * 1056 * Return: Value of the parameter if the parameter is found, or 0 otherwise 1057 */ 1058 static bool get_bool(struct platform_device *ofdev, const char *s) 1059 { 1060 u32 *p = (u32 *)of_get_property(ofdev->dev.of_node, s, NULL); 1061 1062 if (p) { 1063 return (bool)*p; 1064 } else { 1065 dev_warn(&ofdev->dev, "Parameter %s not found," 1066 "defaulting to false\n", s); 1067 return false; 1068 } 1069 } 1070 1071 static struct net_device_ops xemaclite_netdev_ops; 1072 1073 /** 1074 * xemaclite_of_probe - Probe method for the Emaclite device. 1075 * @ofdev: Pointer to OF device structure 1076 * @match: Pointer to the structure used for matching a device 1077 * 1078 * This function probes for the Emaclite device in the device tree. 1079 * It initializes the driver data structure and the hardware, sets the MAC 1080 * address and registers the network device. 1081 * It also registers a mii_bus for the Emaclite device, if MDIO is included 1082 * in the device. 1083 * 1084 * Return: 0, if the driver is bound to the Emaclite device, or 1085 * a negative error if there is failure. 1086 */ 1087 static int xemaclite_of_probe(struct platform_device *ofdev) 1088 { 1089 struct resource *res; 1090 struct net_device *ndev = NULL; 1091 struct net_local *lp = NULL; 1092 struct device *dev = &ofdev->dev; 1093 const void *mac_address; 1094 1095 int rc = 0; 1096 1097 dev_info(dev, "Device Tree Probing\n"); 1098 1099 /* Create an ethernet device instance */ 1100 ndev = alloc_etherdev(sizeof(struct net_local)); 1101 if (!ndev) 1102 return -ENOMEM; 1103 1104 dev_set_drvdata(dev, ndev); 1105 SET_NETDEV_DEV(ndev, &ofdev->dev); 1106 1107 lp = netdev_priv(ndev); 1108 lp->ndev = ndev; 1109 1110 /* Get IRQ for the device */ 1111 res = platform_get_resource(ofdev, IORESOURCE_IRQ, 0); 1112 if (!res) { 1113 dev_err(dev, "no IRQ found\n"); 1114 rc = -ENXIO; 1115 goto error; 1116 } 1117 1118 ndev->irq = res->start; 1119 1120 res = platform_get_resource(ofdev, IORESOURCE_MEM, 0); 1121 lp->base_addr = devm_ioremap_resource(&ofdev->dev, res); 1122 if (IS_ERR(lp->base_addr)) { 1123 rc = PTR_ERR(lp->base_addr); 1124 goto error; 1125 } 1126 1127 ndev->mem_start = res->start; 1128 ndev->mem_end = res->end; 1129 1130 spin_lock_init(&lp->reset_lock); 1131 lp->next_tx_buf_to_use = 0x0; 1132 lp->next_rx_buf_to_use = 0x0; 1133 lp->tx_ping_pong = get_bool(ofdev, "xlnx,tx-ping-pong"); 1134 lp->rx_ping_pong = get_bool(ofdev, "xlnx,rx-ping-pong"); 1135 mac_address = of_get_mac_address(ofdev->dev.of_node); 1136 1137 if (mac_address) 1138 /* Set the MAC address. */ 1139 memcpy(ndev->dev_addr, mac_address, ETH_ALEN); 1140 else 1141 dev_warn(dev, "No MAC address found\n"); 1142 1143 /* Clear the Tx CSR's in case this is a restart */ 1144 __raw_writel(0, lp->base_addr + XEL_TSR_OFFSET); 1145 __raw_writel(0, lp->base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET); 1146 1147 /* Set the MAC address in the EmacLite device */ 1148 xemaclite_update_address(lp, ndev->dev_addr); 1149 1150 lp->phy_node = of_parse_phandle(ofdev->dev.of_node, "phy-handle", 0); 1151 rc = xemaclite_mdio_setup(lp, &ofdev->dev); 1152 if (rc) 1153 dev_warn(&ofdev->dev, "error registering MDIO bus\n"); 1154 1155 dev_info(dev, "MAC address is now %pM\n", ndev->dev_addr); 1156 1157 ndev->netdev_ops = &xemaclite_netdev_ops; 1158 ndev->flags &= ~IFF_MULTICAST; 1159 ndev->watchdog_timeo = TX_TIMEOUT; 1160 1161 /* Finally, register the device */ 1162 rc = register_netdev(ndev); 1163 if (rc) { 1164 dev_err(dev, 1165 "Cannot register network device, aborting\n"); 1166 goto error; 1167 } 1168 1169 dev_info(dev, 1170 "Xilinx EmacLite at 0x%08X mapped to 0x%08X, irq=%d\n", 1171 (unsigned int __force)ndev->mem_start, 1172 (unsigned int __force)lp->base_addr, ndev->irq); 1173 return 0; 1174 1175 error: 1176 xemaclite_remove_ndev(ndev); 1177 return rc; 1178 } 1179 1180 /** 1181 * xemaclite_of_remove - Unbind the driver from the Emaclite device. 1182 * @of_dev: Pointer to OF device structure 1183 * 1184 * This function is called if a device is physically removed from the system or 1185 * if the driver module is being unloaded. It frees any resources allocated to 1186 * the device. 1187 * 1188 * Return: 0, always. 1189 */ 1190 static int xemaclite_of_remove(struct platform_device *of_dev) 1191 { 1192 struct net_device *ndev = platform_get_drvdata(of_dev); 1193 1194 struct net_local *lp = netdev_priv(ndev); 1195 1196 /* Un-register the mii_bus, if configured */ 1197 if (lp->has_mdio) { 1198 mdiobus_unregister(lp->mii_bus); 1199 kfree(lp->mii_bus->irq); 1200 mdiobus_free(lp->mii_bus); 1201 lp->mii_bus = NULL; 1202 } 1203 1204 unregister_netdev(ndev); 1205 1206 of_node_put(lp->phy_node); 1207 lp->phy_node = NULL; 1208 1209 xemaclite_remove_ndev(ndev); 1210 1211 return 0; 1212 } 1213 1214 #ifdef CONFIG_NET_POLL_CONTROLLER 1215 static void 1216 xemaclite_poll_controller(struct net_device *ndev) 1217 { 1218 disable_irq(ndev->irq); 1219 xemaclite_interrupt(ndev->irq, ndev); 1220 enable_irq(ndev->irq); 1221 } 1222 #endif 1223 1224 static struct net_device_ops xemaclite_netdev_ops = { 1225 .ndo_open = xemaclite_open, 1226 .ndo_stop = xemaclite_close, 1227 .ndo_start_xmit = xemaclite_send, 1228 .ndo_set_mac_address = xemaclite_set_mac_address, 1229 .ndo_tx_timeout = xemaclite_tx_timeout, 1230 #ifdef CONFIG_NET_POLL_CONTROLLER 1231 .ndo_poll_controller = xemaclite_poll_controller, 1232 #endif 1233 }; 1234 1235 /* Match table for OF platform binding */ 1236 static const struct of_device_id xemaclite_of_match[] = { 1237 { .compatible = "xlnx,opb-ethernetlite-1.01.a", }, 1238 { .compatible = "xlnx,opb-ethernetlite-1.01.b", }, 1239 { .compatible = "xlnx,xps-ethernetlite-1.00.a", }, 1240 { .compatible = "xlnx,xps-ethernetlite-2.00.a", }, 1241 { .compatible = "xlnx,xps-ethernetlite-2.01.a", }, 1242 { .compatible = "xlnx,xps-ethernetlite-3.00.a", }, 1243 { /* end of list */ }, 1244 }; 1245 MODULE_DEVICE_TABLE(of, xemaclite_of_match); 1246 1247 static struct platform_driver xemaclite_of_driver = { 1248 .driver = { 1249 .name = DRIVER_NAME, 1250 .of_match_table = xemaclite_of_match, 1251 }, 1252 .probe = xemaclite_of_probe, 1253 .remove = xemaclite_of_remove, 1254 }; 1255 1256 module_platform_driver(xemaclite_of_driver); 1257 1258 MODULE_AUTHOR("Xilinx, Inc."); 1259 MODULE_DESCRIPTION("Xilinx Ethernet MAC Lite driver"); 1260 MODULE_LICENSE("GPL"); 1261