1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * MDIO bus driver for the Xilinx Axi Ethernet device 4 * 5 * Copyright (c) 2009 Secret Lab Technologies, Ltd. 6 * Copyright (c) 2010 - 2011 Michal Simek <monstr@monstr.eu> 7 * Copyright (c) 2010 - 2011 PetaLogix 8 * Copyright (c) 2019 SED Systems, a division of Calian Ltd. 9 * Copyright (c) 2010 - 2012 Xilinx, Inc. All rights reserved. 10 */ 11 12 #include <linux/clk.h> 13 #include <linux/of_address.h> 14 #include <linux/of_mdio.h> 15 #include <linux/jiffies.h> 16 #include <linux/iopoll.h> 17 18 #include "xilinx_axienet.h" 19 20 #define MAX_MDIO_FREQ 2500000 /* 2.5 MHz */ 21 #define DEFAULT_HOST_CLOCK 150000000 /* 150 MHz */ 22 23 /* Wait till MDIO interface is ready to accept a new transaction.*/ 24 static int axienet_mdio_wait_until_ready(struct axienet_local *lp) 25 { 26 u32 val; 27 28 return readx_poll_timeout(axinet_ior_read_mcr, lp, 29 val, val & XAE_MDIO_MCR_READY_MASK, 30 1, 20000); 31 } 32 33 /* Enable the MDIO MDC. Called prior to a read/write operation */ 34 static void axienet_mdio_mdc_enable(struct axienet_local *lp) 35 { 36 axienet_iow(lp, XAE_MDIO_MC_OFFSET, 37 ((u32)lp->mii_clk_div | XAE_MDIO_MC_MDIOEN_MASK)); 38 } 39 40 /* Disable the MDIO MDC. Called after a read/write operation*/ 41 static void axienet_mdio_mdc_disable(struct axienet_local *lp) 42 { 43 u32 mc_reg; 44 45 mc_reg = axienet_ior(lp, XAE_MDIO_MC_OFFSET); 46 axienet_iow(lp, XAE_MDIO_MC_OFFSET, 47 (mc_reg & ~XAE_MDIO_MC_MDIOEN_MASK)); 48 } 49 50 /** 51 * axienet_mdio_read - MDIO interface read function 52 * @bus: Pointer to mii bus structure 53 * @phy_id: Address of the PHY device 54 * @reg: PHY register to read 55 * 56 * Return: The register contents on success, -ETIMEDOUT on a timeout 57 * 58 * Reads the contents of the requested register from the requested PHY 59 * address by first writing the details into MCR register. After a while 60 * the register MRD is read to obtain the PHY register content. 61 */ 62 static int axienet_mdio_read(struct mii_bus *bus, int phy_id, int reg) 63 { 64 u32 rc; 65 int ret; 66 struct axienet_local *lp = bus->priv; 67 68 axienet_mdio_mdc_enable(lp); 69 70 ret = axienet_mdio_wait_until_ready(lp); 71 if (ret < 0) { 72 axienet_mdio_mdc_disable(lp); 73 return ret; 74 } 75 76 axienet_iow(lp, XAE_MDIO_MCR_OFFSET, 77 (((phy_id << XAE_MDIO_MCR_PHYAD_SHIFT) & 78 XAE_MDIO_MCR_PHYAD_MASK) | 79 ((reg << XAE_MDIO_MCR_REGAD_SHIFT) & 80 XAE_MDIO_MCR_REGAD_MASK) | 81 XAE_MDIO_MCR_INITIATE_MASK | 82 XAE_MDIO_MCR_OP_READ_MASK)); 83 84 ret = axienet_mdio_wait_until_ready(lp); 85 if (ret < 0) { 86 axienet_mdio_mdc_disable(lp); 87 return ret; 88 } 89 90 rc = axienet_ior(lp, XAE_MDIO_MRD_OFFSET) & 0x0000FFFF; 91 92 dev_dbg(lp->dev, "axienet_mdio_read(phy_id=%i, reg=%x) == %x\n", 93 phy_id, reg, rc); 94 95 axienet_mdio_mdc_disable(lp); 96 return rc; 97 } 98 99 /** 100 * axienet_mdio_write - MDIO interface write function 101 * @bus: Pointer to mii bus structure 102 * @phy_id: Address of the PHY device 103 * @reg: PHY register to write to 104 * @val: Value to be written into the register 105 * 106 * Return: 0 on success, -ETIMEDOUT on a timeout 107 * 108 * Writes the value to the requested register by first writing the value 109 * into MWD register. The MCR register is then appropriately setup 110 * to finish the write operation. 111 */ 112 static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg, 113 u16 val) 114 { 115 int ret; 116 struct axienet_local *lp = bus->priv; 117 118 dev_dbg(lp->dev, "axienet_mdio_write(phy_id=%i, reg=%x, val=%x)\n", 119 phy_id, reg, val); 120 121 axienet_mdio_mdc_enable(lp); 122 123 ret = axienet_mdio_wait_until_ready(lp); 124 if (ret < 0) { 125 axienet_mdio_mdc_disable(lp); 126 return ret; 127 } 128 129 axienet_iow(lp, XAE_MDIO_MWD_OFFSET, (u32)val); 130 axienet_iow(lp, XAE_MDIO_MCR_OFFSET, 131 (((phy_id << XAE_MDIO_MCR_PHYAD_SHIFT) & 132 XAE_MDIO_MCR_PHYAD_MASK) | 133 ((reg << XAE_MDIO_MCR_REGAD_SHIFT) & 134 XAE_MDIO_MCR_REGAD_MASK) | 135 XAE_MDIO_MCR_INITIATE_MASK | 136 XAE_MDIO_MCR_OP_WRITE_MASK)); 137 138 ret = axienet_mdio_wait_until_ready(lp); 139 if (ret < 0) { 140 axienet_mdio_mdc_disable(lp); 141 return ret; 142 } 143 axienet_mdio_mdc_disable(lp); 144 return 0; 145 } 146 147 /** 148 * axienet_mdio_enable - MDIO hardware setup function 149 * @lp: Pointer to axienet local data structure. 150 * 151 * Return: 0 on success, -ETIMEDOUT on a timeout. 152 * 153 * Sets up the MDIO interface by initializing the MDIO clock and enabling the 154 * MDIO interface in hardware. 155 **/ 156 int axienet_mdio_enable(struct axienet_local *lp) 157 { 158 u32 host_clock; 159 160 lp->mii_clk_div = 0; 161 162 if (lp->axi_clk) { 163 host_clock = clk_get_rate(lp->axi_clk); 164 } else { 165 struct device_node *np1; 166 167 /* Legacy fallback: detect CPU clock frequency and use as AXI 168 * bus clock frequency. This only works on certain platforms. 169 */ 170 np1 = of_find_node_by_name(NULL, "cpu"); 171 if (!np1) { 172 netdev_warn(lp->ndev, "Could not find CPU device node.\n"); 173 host_clock = DEFAULT_HOST_CLOCK; 174 } else { 175 int ret = of_property_read_u32(np1, "clock-frequency", 176 &host_clock); 177 if (ret) { 178 netdev_warn(lp->ndev, "CPU clock-frequency property not found.\n"); 179 host_clock = DEFAULT_HOST_CLOCK; 180 } 181 of_node_put(np1); 182 } 183 netdev_info(lp->ndev, "Setting assumed host clock to %u\n", 184 host_clock); 185 } 186 187 /* clk_div can be calculated by deriving it from the equation: 188 * fMDIO = fHOST / ((1 + clk_div) * 2) 189 * 190 * Where fMDIO <= 2500000, so we get: 191 * fHOST / ((1 + clk_div) * 2) <= 2500000 192 * 193 * Then we get: 194 * 1 / ((1 + clk_div) * 2) <= (2500000 / fHOST) 195 * 196 * Then we get: 197 * 1 / (1 + clk_div) <= ((2500000 * 2) / fHOST) 198 * 199 * Then we get: 200 * 1 / (1 + clk_div) <= (5000000 / fHOST) 201 * 202 * So: 203 * (1 + clk_div) >= (fHOST / 5000000) 204 * 205 * And finally: 206 * clk_div >= (fHOST / 5000000) - 1 207 * 208 * fHOST can be read from the flattened device tree as property 209 * "clock-frequency" from the CPU 210 */ 211 212 lp->mii_clk_div = (host_clock / (MAX_MDIO_FREQ * 2)) - 1; 213 /* If there is any remainder from the division of 214 * fHOST / (MAX_MDIO_FREQ * 2), then we need to add 215 * 1 to the clock divisor or we will surely be above 2.5 MHz 216 */ 217 if (host_clock % (MAX_MDIO_FREQ * 2)) 218 lp->mii_clk_div++; 219 220 netdev_dbg(lp->ndev, 221 "Setting MDIO clock divisor to %u/%u Hz host clock.\n", 222 lp->mii_clk_div, host_clock); 223 224 axienet_iow(lp, XAE_MDIO_MC_OFFSET, lp->mii_clk_div | XAE_MDIO_MC_MDIOEN_MASK); 225 226 return axienet_mdio_wait_until_ready(lp); 227 } 228 229 /** 230 * axienet_mdio_disable - MDIO hardware disable function 231 * @lp: Pointer to axienet local data structure. 232 * 233 * Disable the MDIO interface in hardware. 234 **/ 235 void axienet_mdio_disable(struct axienet_local *lp) 236 { 237 axienet_iow(lp, XAE_MDIO_MC_OFFSET, 0); 238 } 239 240 /** 241 * axienet_mdio_setup - MDIO setup function 242 * @lp: Pointer to axienet local data structure. 243 * 244 * Return: 0 on success, -ETIMEDOUT on a timeout, -ENOMEM when 245 * mdiobus_alloc (to allocate memory for mii bus structure) fails. 246 * 247 * Sets up the MDIO interface by initializing the MDIO clock. 248 * Register the MDIO interface. 249 **/ 250 int axienet_mdio_setup(struct axienet_local *lp) 251 { 252 struct device_node *mdio_node; 253 struct mii_bus *bus; 254 int ret; 255 256 ret = axienet_mdio_enable(lp); 257 if (ret < 0) 258 return ret; 259 260 bus = mdiobus_alloc(); 261 if (!bus) 262 return -ENOMEM; 263 264 snprintf(bus->id, MII_BUS_ID_SIZE, "axienet-%.8llx", 265 (unsigned long long)lp->regs_start); 266 267 bus->priv = lp; 268 bus->name = "Xilinx Axi Ethernet MDIO"; 269 bus->read = axienet_mdio_read; 270 bus->write = axienet_mdio_write; 271 bus->parent = lp->dev; 272 lp->mii_bus = bus; 273 274 mdio_node = of_get_child_by_name(lp->dev->of_node, "mdio"); 275 ret = of_mdiobus_register(bus, mdio_node); 276 of_node_put(mdio_node); 277 if (ret) { 278 mdiobus_free(bus); 279 lp->mii_bus = NULL; 280 return ret; 281 } 282 axienet_mdio_mdc_disable(lp); 283 return 0; 284 } 285 286 /** 287 * axienet_mdio_teardown - MDIO remove function 288 * @lp: Pointer to axienet local data structure. 289 * 290 * Unregisters the MDIO and frees any associate memory for mii bus. 291 */ 292 void axienet_mdio_teardown(struct axienet_local *lp) 293 { 294 mdiobus_unregister(lp->mii_bus); 295 mdiobus_free(lp->mii_bus); 296 lp->mii_bus = NULL; 297 } 298