1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* 3 * Definitions for Xilinx Axi Ethernet device driver. 4 * 5 * Copyright (c) 2009 Secret Lab Technologies, Ltd. 6 * Copyright (c) 2010 - 2012 Xilinx, Inc. All rights reserved. 7 */ 8 9 #ifndef XILINX_AXIENET_H 10 #define XILINX_AXIENET_H 11 12 #include <linux/netdevice.h> 13 #include <linux/spinlock.h> 14 #include <linux/interrupt.h> 15 #include <linux/if_vlan.h> 16 17 /* Packet size info */ 18 #define XAE_HDR_SIZE 14 /* Size of Ethernet header */ 19 #define XAE_TRL_SIZE 4 /* Size of Ethernet trailer (FCS) */ 20 #define XAE_MTU 1500 /* Max MTU of an Ethernet frame */ 21 #define XAE_JUMBO_MTU 9000 /* Max MTU of a jumbo Eth. frame */ 22 23 #define XAE_MAX_FRAME_SIZE (XAE_MTU + XAE_HDR_SIZE + XAE_TRL_SIZE) 24 #define XAE_MAX_VLAN_FRAME_SIZE (XAE_MTU + VLAN_ETH_HLEN + XAE_TRL_SIZE) 25 #define XAE_MAX_JUMBO_FRAME_SIZE (XAE_JUMBO_MTU + XAE_HDR_SIZE + XAE_TRL_SIZE) 26 27 /* Configuration options */ 28 29 /* Accept all incoming packets. Default: disabled (cleared) */ 30 #define XAE_OPTION_PROMISC (1 << 0) 31 32 /* Jumbo frame support for Tx & Rx. Default: disabled (cleared) */ 33 #define XAE_OPTION_JUMBO (1 << 1) 34 35 /* VLAN Rx & Tx frame support. Default: disabled (cleared) */ 36 #define XAE_OPTION_VLAN (1 << 2) 37 38 /* Enable recognition of flow control frames on Rx. Default: enabled (set) */ 39 #define XAE_OPTION_FLOW_CONTROL (1 << 4) 40 41 /* Strip FCS and PAD from incoming frames. Note: PAD from VLAN frames is not 42 * stripped. Default: disabled (set) 43 */ 44 #define XAE_OPTION_FCS_STRIP (1 << 5) 45 46 /* Generate FCS field and add PAD automatically for outgoing frames. 47 * Default: enabled (set) 48 */ 49 #define XAE_OPTION_FCS_INSERT (1 << 6) 50 51 /* Enable Length/Type error checking for incoming frames. When this option is 52 * set, the MAC will filter frames that have a mismatched type/length field 53 * and if XAE_OPTION_REPORT_RXERR is set, the user is notified when these 54 * types of frames are encountered. When this option is cleared, the MAC will 55 * allow these types of frames to be received. Default: enabled (set) 56 */ 57 #define XAE_OPTION_LENTYPE_ERR (1 << 7) 58 59 /* Enable the transmitter. Default: enabled (set) */ 60 #define XAE_OPTION_TXEN (1 << 11) 61 62 /* Enable the receiver. Default: enabled (set) */ 63 #define XAE_OPTION_RXEN (1 << 12) 64 65 /* Default options set when device is initialized or reset */ 66 #define XAE_OPTION_DEFAULTS \ 67 (XAE_OPTION_TXEN | \ 68 XAE_OPTION_FLOW_CONTROL | \ 69 XAE_OPTION_RXEN) 70 71 /* Axi DMA Register definitions */ 72 73 #define XAXIDMA_TX_CR_OFFSET 0x00000000 /* Channel control */ 74 #define XAXIDMA_TX_SR_OFFSET 0x00000004 /* Status */ 75 #define XAXIDMA_TX_CDESC_OFFSET 0x00000008 /* Current descriptor pointer */ 76 #define XAXIDMA_TX_TDESC_OFFSET 0x00000010 /* Tail descriptor pointer */ 77 78 #define XAXIDMA_RX_CR_OFFSET 0x00000030 /* Channel control */ 79 #define XAXIDMA_RX_SR_OFFSET 0x00000034 /* Status */ 80 #define XAXIDMA_RX_CDESC_OFFSET 0x00000038 /* Current descriptor pointer */ 81 #define XAXIDMA_RX_TDESC_OFFSET 0x00000040 /* Tail descriptor pointer */ 82 83 #define XAXIDMA_CR_RUNSTOP_MASK 0x00000001 /* Start/stop DMA channel */ 84 #define XAXIDMA_CR_RESET_MASK 0x00000004 /* Reset DMA engine */ 85 86 #define XAXIDMA_BD_NDESC_OFFSET 0x00 /* Next descriptor pointer */ 87 #define XAXIDMA_BD_BUFA_OFFSET 0x08 /* Buffer address */ 88 #define XAXIDMA_BD_CTRL_LEN_OFFSET 0x18 /* Control/buffer length */ 89 #define XAXIDMA_BD_STS_OFFSET 0x1C /* Status */ 90 #define XAXIDMA_BD_USR0_OFFSET 0x20 /* User IP specific word0 */ 91 #define XAXIDMA_BD_USR1_OFFSET 0x24 /* User IP specific word1 */ 92 #define XAXIDMA_BD_USR2_OFFSET 0x28 /* User IP specific word2 */ 93 #define XAXIDMA_BD_USR3_OFFSET 0x2C /* User IP specific word3 */ 94 #define XAXIDMA_BD_USR4_OFFSET 0x30 /* User IP specific word4 */ 95 #define XAXIDMA_BD_ID_OFFSET 0x34 /* Sw ID */ 96 #define XAXIDMA_BD_HAS_STSCNTRL_OFFSET 0x38 /* Whether has stscntrl strm */ 97 #define XAXIDMA_BD_HAS_DRE_OFFSET 0x3C /* Whether has DRE */ 98 99 #define XAXIDMA_BD_HAS_DRE_SHIFT 8 /* Whether has DRE shift */ 100 #define XAXIDMA_BD_HAS_DRE_MASK 0xF00 /* Whether has DRE mask */ 101 #define XAXIDMA_BD_WORDLEN_MASK 0xFF /* Whether has DRE mask */ 102 103 #define XAXIDMA_BD_CTRL_LENGTH_MASK 0x007FFFFF /* Requested len */ 104 #define XAXIDMA_BD_CTRL_TXSOF_MASK 0x08000000 /* First tx packet */ 105 #define XAXIDMA_BD_CTRL_TXEOF_MASK 0x04000000 /* Last tx packet */ 106 #define XAXIDMA_BD_CTRL_ALL_MASK 0x0C000000 /* All control bits */ 107 108 #define XAXIDMA_DELAY_MASK 0xFF000000 /* Delay timeout counter */ 109 #define XAXIDMA_COALESCE_MASK 0x00FF0000 /* Coalesce counter */ 110 111 #define XAXIDMA_DELAY_SHIFT 24 112 #define XAXIDMA_COALESCE_SHIFT 16 113 114 #define XAXIDMA_IRQ_IOC_MASK 0x00001000 /* Completion intr */ 115 #define XAXIDMA_IRQ_DELAY_MASK 0x00002000 /* Delay interrupt */ 116 #define XAXIDMA_IRQ_ERROR_MASK 0x00004000 /* Error interrupt */ 117 #define XAXIDMA_IRQ_ALL_MASK 0x00007000 /* All interrupts */ 118 119 /* Default TX/RX Threshold and waitbound values for SGDMA mode */ 120 #define XAXIDMA_DFT_TX_THRESHOLD 24 121 #define XAXIDMA_DFT_TX_WAITBOUND 254 122 #define XAXIDMA_DFT_RX_THRESHOLD 24 123 #define XAXIDMA_DFT_RX_WAITBOUND 254 124 125 #define XAXIDMA_BD_CTRL_TXSOF_MASK 0x08000000 /* First tx packet */ 126 #define XAXIDMA_BD_CTRL_TXEOF_MASK 0x04000000 /* Last tx packet */ 127 #define XAXIDMA_BD_CTRL_ALL_MASK 0x0C000000 /* All control bits */ 128 129 #define XAXIDMA_BD_STS_ACTUAL_LEN_MASK 0x007FFFFF /* Actual len */ 130 #define XAXIDMA_BD_STS_COMPLETE_MASK 0x80000000 /* Completed */ 131 #define XAXIDMA_BD_STS_DEC_ERR_MASK 0x40000000 /* Decode error */ 132 #define XAXIDMA_BD_STS_SLV_ERR_MASK 0x20000000 /* Slave error */ 133 #define XAXIDMA_BD_STS_INT_ERR_MASK 0x10000000 /* Internal err */ 134 #define XAXIDMA_BD_STS_ALL_ERR_MASK 0x70000000 /* All errors */ 135 #define XAXIDMA_BD_STS_RXSOF_MASK 0x08000000 /* First rx pkt */ 136 #define XAXIDMA_BD_STS_RXEOF_MASK 0x04000000 /* Last rx pkt */ 137 #define XAXIDMA_BD_STS_ALL_MASK 0xFC000000 /* All status bits */ 138 139 #define XAXIDMA_BD_MINIMUM_ALIGNMENT 0x40 140 141 /* Axi Ethernet registers definition */ 142 #define XAE_RAF_OFFSET 0x00000000 /* Reset and Address filter */ 143 #define XAE_TPF_OFFSET 0x00000004 /* Tx Pause Frame */ 144 #define XAE_IFGP_OFFSET 0x00000008 /* Tx Inter-frame gap adjustment*/ 145 #define XAE_IS_OFFSET 0x0000000C /* Interrupt status */ 146 #define XAE_IP_OFFSET 0x00000010 /* Interrupt pending */ 147 #define XAE_IE_OFFSET 0x00000014 /* Interrupt enable */ 148 #define XAE_TTAG_OFFSET 0x00000018 /* Tx VLAN TAG */ 149 #define XAE_RTAG_OFFSET 0x0000001C /* Rx VLAN TAG */ 150 #define XAE_UAWL_OFFSET 0x00000020 /* Unicast address word lower */ 151 #define XAE_UAWU_OFFSET 0x00000024 /* Unicast address word upper */ 152 #define XAE_TPID0_OFFSET 0x00000028 /* VLAN TPID0 register */ 153 #define XAE_TPID1_OFFSET 0x0000002C /* VLAN TPID1 register */ 154 #define XAE_PPST_OFFSET 0x00000030 /* PCS PMA Soft Temac Status Reg */ 155 #define XAE_RCW0_OFFSET 0x00000400 /* Rx Configuration Word 0 */ 156 #define XAE_RCW1_OFFSET 0x00000404 /* Rx Configuration Word 1 */ 157 #define XAE_TC_OFFSET 0x00000408 /* Tx Configuration */ 158 #define XAE_FCC_OFFSET 0x0000040C /* Flow Control Configuration */ 159 #define XAE_EMMC_OFFSET 0x00000410 /* EMAC mode configuration */ 160 #define XAE_PHYC_OFFSET 0x00000414 /* RGMII/SGMII configuration */ 161 #define XAE_MDIO_MC_OFFSET 0x00000500 /* MII Management Config */ 162 #define XAE_MDIO_MCR_OFFSET 0x00000504 /* MII Management Control */ 163 #define XAE_MDIO_MWD_OFFSET 0x00000508 /* MII Management Write Data */ 164 #define XAE_MDIO_MRD_OFFSET 0x0000050C /* MII Management Read Data */ 165 #define XAE_MDIO_MIS_OFFSET 0x00000600 /* MII Management Interrupt Status */ 166 /* MII Mgmt Interrupt Pending register offset */ 167 #define XAE_MDIO_MIP_OFFSET 0x00000620 168 /* MII Management Interrupt Enable register offset */ 169 #define XAE_MDIO_MIE_OFFSET 0x00000640 170 /* MII Management Interrupt Clear register offset. */ 171 #define XAE_MDIO_MIC_OFFSET 0x00000660 172 #define XAE_UAW0_OFFSET 0x00000700 /* Unicast address word 0 */ 173 #define XAE_UAW1_OFFSET 0x00000704 /* Unicast address word 1 */ 174 #define XAE_FMI_OFFSET 0x00000708 /* Filter Mask Index */ 175 #define XAE_AF0_OFFSET 0x00000710 /* Address Filter 0 */ 176 #define XAE_AF1_OFFSET 0x00000714 /* Address Filter 1 */ 177 178 #define XAE_TX_VLAN_DATA_OFFSET 0x00004000 /* TX VLAN data table address */ 179 #define XAE_RX_VLAN_DATA_OFFSET 0x00008000 /* RX VLAN data table address */ 180 #define XAE_MCAST_TABLE_OFFSET 0x00020000 /* Multicast table address */ 181 182 /* Bit Masks for Axi Ethernet RAF register */ 183 /* Reject receive multicast destination address */ 184 #define XAE_RAF_MCSTREJ_MASK 0x00000002 185 /* Reject receive broadcast destination address */ 186 #define XAE_RAF_BCSTREJ_MASK 0x00000004 187 #define XAE_RAF_TXVTAGMODE_MASK 0x00000018 /* Tx VLAN TAG mode */ 188 #define XAE_RAF_RXVTAGMODE_MASK 0x00000060 /* Rx VLAN TAG mode */ 189 #define XAE_RAF_TXVSTRPMODE_MASK 0x00000180 /* Tx VLAN STRIP mode */ 190 #define XAE_RAF_RXVSTRPMODE_MASK 0x00000600 /* Rx VLAN STRIP mode */ 191 #define XAE_RAF_NEWFNCENBL_MASK 0x00000800 /* New function mode */ 192 /* Exteneded Multicast Filtering mode */ 193 #define XAE_RAF_EMULTIFLTRENBL_MASK 0x00001000 194 #define XAE_RAF_STATSRST_MASK 0x00002000 /* Stats. Counter Reset */ 195 #define XAE_RAF_RXBADFRMEN_MASK 0x00004000 /* Recv Bad Frame Enable */ 196 #define XAE_RAF_TXVTAGMODE_SHIFT 3 /* Tx Tag mode shift bits */ 197 #define XAE_RAF_RXVTAGMODE_SHIFT 5 /* Rx Tag mode shift bits */ 198 #define XAE_RAF_TXVSTRPMODE_SHIFT 7 /* Tx strip mode shift bits*/ 199 #define XAE_RAF_RXVSTRPMODE_SHIFT 9 /* Rx Strip mode shift bits*/ 200 201 /* Bit Masks for Axi Ethernet TPF and IFGP registers */ 202 #define XAE_TPF_TPFV_MASK 0x0000FFFF /* Tx pause frame value */ 203 /* Transmit inter-frame gap adjustment value */ 204 #define XAE_IFGP0_IFGP_MASK 0x0000007F 205 206 /* Bit Masks for Axi Ethernet IS, IE and IP registers, Same masks apply 207 * for all 3 registers. 208 */ 209 /* Hard register access complete */ 210 #define XAE_INT_HARDACSCMPLT_MASK 0x00000001 211 /* Auto negotiation complete */ 212 #define XAE_INT_AUTONEG_MASK 0x00000002 213 #define XAE_INT_RXCMPIT_MASK 0x00000004 /* Rx complete */ 214 #define XAE_INT_RXRJECT_MASK 0x00000008 /* Rx frame rejected */ 215 #define XAE_INT_RXFIFOOVR_MASK 0x00000010 /* Rx fifo overrun */ 216 #define XAE_INT_TXCMPIT_MASK 0x00000020 /* Tx complete */ 217 #define XAE_INT_RXDCMLOCK_MASK 0x00000040 /* Rx Dcm Lock */ 218 #define XAE_INT_MGTRDY_MASK 0x00000080 /* MGT clock Lock */ 219 #define XAE_INT_PHYRSTCMPLT_MASK 0x00000100 /* Phy Reset complete */ 220 #define XAE_INT_ALL_MASK 0x0000003F /* All the ints */ 221 222 /* INT bits that indicate receive errors */ 223 #define XAE_INT_RECV_ERROR_MASK \ 224 (XAE_INT_RXRJECT_MASK | XAE_INT_RXFIFOOVR_MASK) 225 226 /* Bit masks for Axi Ethernet VLAN TPID Word 0 register */ 227 #define XAE_TPID_0_MASK 0x0000FFFF /* TPID 0 */ 228 #define XAE_TPID_1_MASK 0xFFFF0000 /* TPID 1 */ 229 230 /* Bit masks for Axi Ethernet VLAN TPID Word 1 register */ 231 #define XAE_TPID_2_MASK 0x0000FFFF /* TPID 0 */ 232 #define XAE_TPID_3_MASK 0xFFFF0000 /* TPID 1 */ 233 234 /* Bit masks for Axi Ethernet RCW1 register */ 235 #define XAE_RCW1_RST_MASK 0x80000000 /* Reset */ 236 #define XAE_RCW1_JUM_MASK 0x40000000 /* Jumbo frame enable */ 237 /* In-Band FCS enable (FCS not stripped) */ 238 #define XAE_RCW1_FCS_MASK 0x20000000 239 #define XAE_RCW1_RX_MASK 0x10000000 /* Receiver enable */ 240 #define XAE_RCW1_VLAN_MASK 0x08000000 /* VLAN frame enable */ 241 /* Length/type field valid check disable */ 242 #define XAE_RCW1_LT_DIS_MASK 0x02000000 243 /* Control frame Length check disable */ 244 #define XAE_RCW1_CL_DIS_MASK 0x01000000 245 /* Pause frame source address bits [47:32]. Bits [31:0] are 246 * stored in register RCW0 247 */ 248 #define XAE_RCW1_PAUSEADDR_MASK 0x0000FFFF 249 250 /* Bit masks for Axi Ethernet TC register */ 251 #define XAE_TC_RST_MASK 0x80000000 /* Reset */ 252 #define XAE_TC_JUM_MASK 0x40000000 /* Jumbo frame enable */ 253 /* In-Band FCS enable (FCS not generated) */ 254 #define XAE_TC_FCS_MASK 0x20000000 255 #define XAE_TC_TX_MASK 0x10000000 /* Transmitter enable */ 256 #define XAE_TC_VLAN_MASK 0x08000000 /* VLAN frame enable */ 257 /* Inter-frame gap adjustment enable */ 258 #define XAE_TC_IFG_MASK 0x02000000 259 260 /* Bit masks for Axi Ethernet FCC register */ 261 #define XAE_FCC_FCRX_MASK 0x20000000 /* Rx flow control enable */ 262 #define XAE_FCC_FCTX_MASK 0x40000000 /* Tx flow control enable */ 263 264 /* Bit masks for Axi Ethernet EMMC register */ 265 #define XAE_EMMC_LINKSPEED_MASK 0xC0000000 /* Link speed */ 266 #define XAE_EMMC_RGMII_MASK 0x20000000 /* RGMII mode enable */ 267 #define XAE_EMMC_SGMII_MASK 0x10000000 /* SGMII mode enable */ 268 #define XAE_EMMC_GPCS_MASK 0x08000000 /* 1000BaseX mode enable */ 269 #define XAE_EMMC_HOST_MASK 0x04000000 /* Host interface enable */ 270 #define XAE_EMMC_TX16BIT 0x02000000 /* 16 bit Tx client enable */ 271 #define XAE_EMMC_RX16BIT 0x01000000 /* 16 bit Rx client enable */ 272 #define XAE_EMMC_LINKSPD_10 0x00000000 /* Link Speed mask for 10 Mbit */ 273 #define XAE_EMMC_LINKSPD_100 0x40000000 /* Link Speed mask for 100 Mbit */ 274 #define XAE_EMMC_LINKSPD_1000 0x80000000 /* Link Speed mask for 1000 Mbit */ 275 276 /* Bit masks for Axi Ethernet PHYC register */ 277 #define XAE_PHYC_SGMIILINKSPEED_MASK 0xC0000000 /* SGMII link speed mask*/ 278 #define XAE_PHYC_RGMIILINKSPEED_MASK 0x0000000C /* RGMII link speed */ 279 #define XAE_PHYC_RGMIIHD_MASK 0x00000002 /* RGMII Half-duplex */ 280 #define XAE_PHYC_RGMIILINK_MASK 0x00000001 /* RGMII link status */ 281 #define XAE_PHYC_RGLINKSPD_10 0x00000000 /* RGMII link 10 Mbit */ 282 #define XAE_PHYC_RGLINKSPD_100 0x00000004 /* RGMII link 100 Mbit */ 283 #define XAE_PHYC_RGLINKSPD_1000 0x00000008 /* RGMII link 1000 Mbit */ 284 #define XAE_PHYC_SGLINKSPD_10 0x00000000 /* SGMII link 10 Mbit */ 285 #define XAE_PHYC_SGLINKSPD_100 0x40000000 /* SGMII link 100 Mbit */ 286 #define XAE_PHYC_SGLINKSPD_1000 0x80000000 /* SGMII link 1000 Mbit */ 287 288 /* Bit masks for Axi Ethernet MDIO interface MC register */ 289 #define XAE_MDIO_MC_MDIOEN_MASK 0x00000040 /* MII management enable */ 290 #define XAE_MDIO_MC_CLOCK_DIVIDE_MAX 0x3F /* Maximum MDIO divisor */ 291 292 /* Bit masks for Axi Ethernet MDIO interface MCR register */ 293 #define XAE_MDIO_MCR_PHYAD_MASK 0x1F000000 /* Phy Address Mask */ 294 #define XAE_MDIO_MCR_PHYAD_SHIFT 24 /* Phy Address Shift */ 295 #define XAE_MDIO_MCR_REGAD_MASK 0x001F0000 /* Reg Address Mask */ 296 #define XAE_MDIO_MCR_REGAD_SHIFT 16 /* Reg Address Shift */ 297 #define XAE_MDIO_MCR_OP_MASK 0x0000C000 /* Operation Code Mask */ 298 #define XAE_MDIO_MCR_OP_SHIFT 13 /* Operation Code Shift */ 299 #define XAE_MDIO_MCR_OP_READ_MASK 0x00008000 /* Op Code Read Mask */ 300 #define XAE_MDIO_MCR_OP_WRITE_MASK 0x00004000 /* Op Code Write Mask */ 301 #define XAE_MDIO_MCR_INITIATE_MASK 0x00000800 /* Ready Mask */ 302 #define XAE_MDIO_MCR_READY_MASK 0x00000080 /* Ready Mask */ 303 304 /* Bit masks for Axi Ethernet MDIO interface MIS, MIP, MIE, MIC registers */ 305 #define XAE_MDIO_INT_MIIM_RDY_MASK 0x00000001 /* MIIM Interrupt */ 306 307 /* Bit masks for Axi Ethernet UAW1 register */ 308 /* Station address bits [47:32]; Station address 309 * bits [31:0] are stored in register UAW0 310 */ 311 #define XAE_UAW1_UNICASTADDR_MASK 0x0000FFFF 312 313 /* Bit masks for Axi Ethernet FMI register */ 314 #define XAE_FMI_PM_MASK 0x80000000 /* Promis. mode enable */ 315 #define XAE_FMI_IND_MASK 0x00000003 /* Index Mask */ 316 317 #define XAE_MDIO_DIV_DFT 29 /* Default MDIO clock divisor */ 318 319 /* Defines for different options for C_PHY_TYPE parameter in Axi Ethernet IP */ 320 #define XAE_PHY_TYPE_MII 0 321 #define XAE_PHY_TYPE_GMII 1 322 #define XAE_PHY_TYPE_RGMII_1_3 2 323 #define XAE_PHY_TYPE_RGMII_2_0 3 324 #define XAE_PHY_TYPE_SGMII 4 325 #define XAE_PHY_TYPE_1000BASE_X 5 326 327 /* Total number of entries in the hardware multicast table. */ 328 #define XAE_MULTICAST_CAM_TABLE_NUM 4 329 330 /* Axi Ethernet Synthesis features */ 331 #define XAE_FEATURE_PARTIAL_RX_CSUM (1 << 0) 332 #define XAE_FEATURE_PARTIAL_TX_CSUM (1 << 1) 333 #define XAE_FEATURE_FULL_RX_CSUM (1 << 2) 334 #define XAE_FEATURE_FULL_TX_CSUM (1 << 3) 335 336 #define XAE_NO_CSUM_OFFLOAD 0 337 338 #define XAE_FULL_CSUM_STATUS_MASK 0x00000038 339 #define XAE_IP_UDP_CSUM_VALIDATED 0x00000003 340 #define XAE_IP_TCP_CSUM_VALIDATED 0x00000002 341 342 #define DELAY_OF_ONE_MILLISEC 1000 343 344 /** 345 * struct axidma_bd - Axi Dma buffer descriptor layout 346 * @next: MM2S/S2MM Next Descriptor Pointer 347 * @reserved1: Reserved and not used 348 * @phys: MM2S/S2MM Buffer Address 349 * @reserved2: Reserved and not used 350 * @reserved3: Reserved and not used 351 * @reserved4: Reserved and not used 352 * @cntrl: MM2S/S2MM Control value 353 * @status: MM2S/S2MM Status value 354 * @app0: MM2S/S2MM User Application Field 0. 355 * @app1: MM2S/S2MM User Application Field 1. 356 * @app2: MM2S/S2MM User Application Field 2. 357 * @app3: MM2S/S2MM User Application Field 3. 358 * @app4: MM2S/S2MM User Application Field 4. 359 * @sw_id_offset: MM2S/S2MM Sw ID 360 * @reserved5: Reserved and not used 361 * @reserved6: Reserved and not used 362 */ 363 struct axidma_bd { 364 u32 next; /* Physical address of next buffer descriptor */ 365 u32 reserved1; 366 u32 phys; 367 u32 reserved2; 368 u32 reserved3; 369 u32 reserved4; 370 u32 cntrl; 371 u32 status; 372 u32 app0; 373 u32 app1; /* TX start << 16 | insert */ 374 u32 app2; /* TX csum seed */ 375 u32 app3; 376 u32 app4; 377 u32 sw_id_offset; 378 u32 reserved5; 379 u32 reserved6; 380 }; 381 382 /** 383 * struct axienet_local - axienet private per device data 384 * @ndev: Pointer for net_device to which it will be attached. 385 * @dev: Pointer to device structure 386 * @phy_node: Pointer to device node structure 387 * @mii_bus: Pointer to MII bus structure 388 * @regs: Base address for the axienet_local device address space 389 * @dma_regs: Base address for the axidma device address space 390 * @dma_err_tasklet: Tasklet structure to process Axi DMA errors 391 * @tx_irq: Axidma TX IRQ number 392 * @rx_irq: Axidma RX IRQ number 393 * @phy_mode: Phy type to identify between MII/GMII/RGMII/SGMII/1000 Base-X 394 * @options: AxiEthernet option word 395 * @last_link: Phy link state in which the PHY was negotiated earlier 396 * @features: Stores the extended features supported by the axienet hw 397 * @tx_bd_v: Virtual address of the TX buffer descriptor ring 398 * @tx_bd_p: Physical address(start address) of the TX buffer descr. ring 399 * @rx_bd_v: Virtual address of the RX buffer descriptor ring 400 * @rx_bd_p: Physical address(start address) of the RX buffer descr. ring 401 * @tx_bd_ci: Stores the index of the Tx buffer descriptor in the ring being 402 * accessed currently. Used while alloc. BDs before a TX starts 403 * @tx_bd_tail: Stores the index of the Tx buffer descriptor in the ring being 404 * accessed currently. Used while processing BDs after the TX 405 * completed. 406 * @rx_bd_ci: Stores the index of the Rx buffer descriptor in the ring being 407 * accessed currently. 408 * @max_frm_size: Stores the maximum size of the frame that can be that 409 * Txed/Rxed in the existing hardware. If jumbo option is 410 * supported, the maximum frame size would be 9k. Else it is 411 * 1522 bytes (assuming support for basic VLAN) 412 * @rxmem: Stores rx memory size for jumbo frame handling. 413 * @csum_offload_on_tx_path: Stores the checksum selection on TX side. 414 * @csum_offload_on_rx_path: Stores the checksum selection on RX side. 415 * @coalesce_count_rx: Store the irq coalesce on RX side. 416 * @coalesce_count_tx: Store the irq coalesce on TX side. 417 */ 418 struct axienet_local { 419 struct net_device *ndev; 420 struct device *dev; 421 422 /* Connection to PHY device */ 423 struct device_node *phy_node; 424 425 /* MDIO bus data */ 426 struct mii_bus *mii_bus; /* MII bus reference */ 427 428 /* IO registers, dma functions and IRQs */ 429 void __iomem *regs; 430 void __iomem *dma_regs; 431 432 struct tasklet_struct dma_err_tasklet; 433 434 int tx_irq; 435 int rx_irq; 436 phy_interface_t phy_mode; 437 438 u32 options; /* Current options word */ 439 u32 last_link; 440 u32 features; 441 442 /* Buffer descriptors */ 443 struct axidma_bd *tx_bd_v; 444 dma_addr_t tx_bd_p; 445 struct axidma_bd *rx_bd_v; 446 dma_addr_t rx_bd_p; 447 u32 tx_bd_ci; 448 u32 tx_bd_tail; 449 u32 rx_bd_ci; 450 451 u32 max_frm_size; 452 u32 rxmem; 453 454 int csum_offload_on_tx_path; 455 int csum_offload_on_rx_path; 456 457 u32 coalesce_count_rx; 458 u32 coalesce_count_tx; 459 }; 460 461 /** 462 * struct axiethernet_option - Used to set axi ethernet hardware options 463 * @opt: Option to be set. 464 * @reg: Register offset to be written for setting the option 465 * @m_or: Mask to be ORed for setting the option in the register 466 */ 467 struct axienet_option { 468 u32 opt; 469 u32 reg; 470 u32 m_or; 471 }; 472 473 /** 474 * axienet_ior - Memory mapped Axi Ethernet register read 475 * @lp: Pointer to axienet local structure 476 * @offset: Address offset from the base address of Axi Ethernet core 477 * 478 * Return: The contents of the Axi Ethernet register 479 * 480 * This function returns the contents of the corresponding register. 481 */ 482 static inline u32 axienet_ior(struct axienet_local *lp, off_t offset) 483 { 484 return in_be32(lp->regs + offset); 485 } 486 487 /** 488 * axienet_iow - Memory mapped Axi Ethernet register write 489 * @lp: Pointer to axienet local structure 490 * @offset: Address offset from the base address of Axi Ethernet core 491 * @value: Value to be written into the Axi Ethernet register 492 * 493 * This function writes the desired value into the corresponding Axi Ethernet 494 * register. 495 */ 496 static inline void axienet_iow(struct axienet_local *lp, off_t offset, 497 u32 value) 498 { 499 out_be32((lp->regs + offset), value); 500 } 501 502 /* Function prototypes visible in xilinx_axienet_mdio.c for other files */ 503 int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np); 504 int axienet_mdio_wait_until_ready(struct axienet_local *lp); 505 void axienet_mdio_teardown(struct axienet_local *lp); 506 507 #endif /* XILINX_AXI_ENET_H */ 508