1 /*
2  * MDIO bus driver for the Xilinx TEMAC device
3  *
4  * Copyright (c) 2009 Secret Lab Technologies, Ltd.
5  */
6 
7 #include <linux/io.h>
8 #include <linux/netdevice.h>
9 #include <linux/mutex.h>
10 #include <linux/phy.h>
11 #include <linux/of.h>
12 #include <linux/of_device.h>
13 #include <linux/of_address.h>
14 #include <linux/slab.h>
15 #include <linux/of_mdio.h>
16 
17 #include "ll_temac.h"
18 
19 /* ---------------------------------------------------------------------
20  * MDIO Bus functions
21  */
22 static int temac_mdio_read(struct mii_bus *bus, int phy_id, int reg)
23 {
24 	struct temac_local *lp = bus->priv;
25 	u32 rc;
26 
27 	/* Write the PHY address to the MIIM Access Initiator register.
28 	 * When the transfer completes, the PHY register value will appear
29 	 * in the LSW0 register */
30 	mutex_lock(&lp->indirect_mutex);
31 	temac_iow(lp, XTE_LSW0_OFFSET, (phy_id << 5) | reg);
32 	rc = temac_indirect_in32(lp, XTE_MIIMAI_OFFSET);
33 	mutex_unlock(&lp->indirect_mutex);
34 
35 	dev_dbg(lp->dev, "temac_mdio_read(phy_id=%i, reg=%x) == %x\n",
36 		phy_id, reg, rc);
37 
38 	return rc;
39 }
40 
41 static int temac_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 val)
42 {
43 	struct temac_local *lp = bus->priv;
44 
45 	dev_dbg(lp->dev, "temac_mdio_write(phy_id=%i, reg=%x, val=%x)\n",
46 		phy_id, reg, val);
47 
48 	/* First write the desired value into the write data register
49 	 * and then write the address into the access initiator register
50 	 */
51 	mutex_lock(&lp->indirect_mutex);
52 	temac_indirect_out32(lp, XTE_MGTDR_OFFSET, val);
53 	temac_indirect_out32(lp, XTE_MIIMAI_OFFSET, (phy_id << 5) | reg);
54 	mutex_unlock(&lp->indirect_mutex);
55 
56 	return 0;
57 }
58 
59 int temac_mdio_setup(struct temac_local *lp, struct device_node *np)
60 {
61 	struct mii_bus *bus;
62 	const u32 *bus_hz;
63 	int clk_div;
64 	int rc, size;
65 	struct resource res;
66 
67 	/* Calculate a reasonable divisor for the clock rate */
68 	clk_div = 0x3f; /* worst-case default setting */
69 	bus_hz = of_get_property(np, "clock-frequency", &size);
70 	if (bus_hz && size >= sizeof(*bus_hz)) {
71 		clk_div = (*bus_hz) / (2500 * 1000 * 2) - 1;
72 		if (clk_div < 1)
73 			clk_div = 1;
74 		if (clk_div > 0x3f)
75 			clk_div = 0x3f;
76 	}
77 
78 	/* Enable the MDIO bus by asserting the enable bit and writing
79 	 * in the clock config */
80 	mutex_lock(&lp->indirect_mutex);
81 	temac_indirect_out32(lp, XTE_MC_OFFSET, 1 << 6 | clk_div);
82 	mutex_unlock(&lp->indirect_mutex);
83 
84 	bus = mdiobus_alloc();
85 	if (!bus)
86 		return -ENOMEM;
87 
88 	of_address_to_resource(np, 0, &res);
89 	snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx",
90 		 (unsigned long long)res.start);
91 	bus->priv = lp;
92 	bus->name = "Xilinx TEMAC MDIO";
93 	bus->read = temac_mdio_read;
94 	bus->write = temac_mdio_write;
95 	bus->parent = lp->dev;
96 	bus->irq = lp->mdio_irqs; /* preallocated IRQ table */
97 
98 	lp->mii_bus = bus;
99 
100 	rc = of_mdiobus_register(bus, np);
101 	if (rc)
102 		goto err_register;
103 
104 	mutex_lock(&lp->indirect_mutex);
105 	dev_dbg(lp->dev, "MDIO bus registered;  MC:%x\n",
106 		temac_indirect_in32(lp, XTE_MC_OFFSET));
107 	mutex_unlock(&lp->indirect_mutex);
108 	return 0;
109 
110  err_register:
111 	mdiobus_free(bus);
112 	return rc;
113 }
114 
115 void temac_mdio_teardown(struct temac_local *lp)
116 {
117 	mdiobus_unregister(lp->mii_bus);
118 	kfree(lp->mii_bus->irq);
119 	mdiobus_free(lp->mii_bus);
120 	lp->mii_bus = NULL;
121 }
122 
123