1 /******************************************************************************* 2 3 Copyright(c) 2006 Tundra Semiconductor Corporation. 4 5 This program is free software; you can redistribute it and/or modify it 6 under the terms of the GNU General Public License as published by the Free 7 Software Foundation; either version 2 of the License, or (at your option) 8 any later version. 9 10 This program is distributed in the hope that it will be useful, but WITHOUT 11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 13 more details. 14 15 You should have received a copy of the GNU General Public License along with 16 this program; if not, write to the Free Software Foundation, Inc., 59 17 Temple Place - Suite 330, Boston, MA 02111-1307, USA. 18 19 *******************************************************************************/ 20 21 /* This driver is based on the driver code originally developed 22 * for the Intel IOC80314 (ForestLake) Gigabit Ethernet by 23 * scott.wood@timesys.com * Copyright (C) 2003 TimeSys Corporation 24 * 25 * Currently changes from original version are: 26 * - porting to Tsi108-based platform and kernel 2.6 (kong.lai@tundra.com) 27 * - modifications to handle two ports independently and support for 28 * additional PHY devices (alexandre.bounine@tundra.com) 29 * - Get hardware information from platform device. (tie-fei.zang@freescale.com) 30 * 31 */ 32 33 #include <linux/module.h> 34 #include <linux/types.h> 35 #include <linux/interrupt.h> 36 #include <linux/net.h> 37 #include <linux/netdevice.h> 38 #include <linux/etherdevice.h> 39 #include <linux/ethtool.h> 40 #include <linux/skbuff.h> 41 #include <linux/spinlock.h> 42 #include <linux/delay.h> 43 #include <linux/crc32.h> 44 #include <linux/mii.h> 45 #include <linux/device.h> 46 #include <linux/pci.h> 47 #include <linux/rtnetlink.h> 48 #include <linux/timer.h> 49 #include <linux/platform_device.h> 50 #include <linux/gfp.h> 51 52 #include <asm/io.h> 53 #include <asm/tsi108.h> 54 55 #include "tsi108_eth.h" 56 57 #define MII_READ_DELAY 10000 /* max link wait time in msec */ 58 59 #define TSI108_RXRING_LEN 256 60 61 /* NOTE: The driver currently does not support receiving packets 62 * larger than the buffer size, so don't decrease this (unless you 63 * want to add such support). 64 */ 65 #define TSI108_RXBUF_SIZE 1536 66 67 #define TSI108_TXRING_LEN 256 68 69 #define TSI108_TX_INT_FREQ 64 70 71 /* Check the phy status every half a second. */ 72 #define CHECK_PHY_INTERVAL (HZ/2) 73 74 static int tsi108_init_one(struct platform_device *pdev); 75 static int tsi108_ether_remove(struct platform_device *pdev); 76 77 struct tsi108_prv_data { 78 void __iomem *regs; /* Base of normal regs */ 79 void __iomem *phyregs; /* Base of register bank used for PHY access */ 80 81 struct net_device *dev; 82 struct napi_struct napi; 83 84 unsigned int phy; /* Index of PHY for this interface */ 85 unsigned int irq_num; 86 unsigned int id; 87 unsigned int phy_type; 88 89 struct timer_list timer;/* Timer that triggers the check phy function */ 90 unsigned int rxtail; /* Next entry in rxring to read */ 91 unsigned int rxhead; /* Next entry in rxring to give a new buffer */ 92 unsigned int rxfree; /* Number of free, allocated RX buffers */ 93 94 unsigned int rxpending; /* Non-zero if there are still descriptors 95 * to be processed from a previous descriptor 96 * interrupt condition that has been cleared */ 97 98 unsigned int txtail; /* Next TX descriptor to check status on */ 99 unsigned int txhead; /* Next TX descriptor to use */ 100 101 /* Number of free TX descriptors. This could be calculated from 102 * rxhead and rxtail if one descriptor were left unused to disambiguate 103 * full and empty conditions, but it's simpler to just keep track 104 * explicitly. */ 105 106 unsigned int txfree; 107 108 unsigned int phy_ok; /* The PHY is currently powered on. */ 109 110 /* PHY status (duplex is 1 for half, 2 for full, 111 * so that the default 0 indicates that neither has 112 * yet been configured). */ 113 114 unsigned int link_up; 115 unsigned int speed; 116 unsigned int duplex; 117 118 tx_desc *txring; 119 rx_desc *rxring; 120 struct sk_buff *txskbs[TSI108_TXRING_LEN]; 121 struct sk_buff *rxskbs[TSI108_RXRING_LEN]; 122 123 dma_addr_t txdma, rxdma; 124 125 /* txlock nests in misclock and phy_lock */ 126 127 spinlock_t txlock, misclock; 128 129 /* stats is used to hold the upper bits of each hardware counter, 130 * and tmpstats is used to hold the full values for returning 131 * to the caller of get_stats(). They must be separate in case 132 * an overflow interrupt occurs before the stats are consumed. 133 */ 134 135 struct net_device_stats stats; 136 struct net_device_stats tmpstats; 137 138 /* These stats are kept separate in hardware, thus require individual 139 * fields for handling carry. They are combined in get_stats. 140 */ 141 142 unsigned long rx_fcs; /* Add to rx_frame_errors */ 143 unsigned long rx_short_fcs; /* Add to rx_frame_errors */ 144 unsigned long rx_long_fcs; /* Add to rx_frame_errors */ 145 unsigned long rx_underruns; /* Add to rx_length_errors */ 146 unsigned long rx_overruns; /* Add to rx_length_errors */ 147 148 unsigned long tx_coll_abort; /* Add to tx_aborted_errors/collisions */ 149 unsigned long tx_pause_drop; /* Add to tx_aborted_errors */ 150 151 unsigned long mc_hash[16]; 152 u32 msg_enable; /* debug message level */ 153 struct mii_if_info mii_if; 154 unsigned int init_media; 155 }; 156 157 /* Structure for a device driver */ 158 159 static struct platform_driver tsi_eth_driver = { 160 .probe = tsi108_init_one, 161 .remove = tsi108_ether_remove, 162 .driver = { 163 .name = "tsi-ethernet", 164 }, 165 }; 166 167 static void tsi108_timed_checker(unsigned long dev_ptr); 168 169 static void dump_eth_one(struct net_device *dev) 170 { 171 struct tsi108_prv_data *data = netdev_priv(dev); 172 173 printk("Dumping %s...\n", dev->name); 174 printk("intstat %x intmask %x phy_ok %d" 175 " link %d speed %d duplex %d\n", 176 TSI_READ(TSI108_EC_INTSTAT), 177 TSI_READ(TSI108_EC_INTMASK), data->phy_ok, 178 data->link_up, data->speed, data->duplex); 179 180 printk("TX: head %d, tail %d, free %d, stat %x, estat %x, err %x\n", 181 data->txhead, data->txtail, data->txfree, 182 TSI_READ(TSI108_EC_TXSTAT), 183 TSI_READ(TSI108_EC_TXESTAT), 184 TSI_READ(TSI108_EC_TXERR)); 185 186 printk("RX: head %d, tail %d, free %d, stat %x," 187 " estat %x, err %x, pending %d\n\n", 188 data->rxhead, data->rxtail, data->rxfree, 189 TSI_READ(TSI108_EC_RXSTAT), 190 TSI_READ(TSI108_EC_RXESTAT), 191 TSI_READ(TSI108_EC_RXERR), data->rxpending); 192 } 193 194 /* Synchronization is needed between the thread and up/down events. 195 * Note that the PHY is accessed through the same registers for both 196 * interfaces, so this can't be made interface-specific. 197 */ 198 199 static DEFINE_SPINLOCK(phy_lock); 200 201 static int tsi108_read_mii(struct tsi108_prv_data *data, int reg) 202 { 203 unsigned i; 204 205 TSI_WRITE_PHY(TSI108_MAC_MII_ADDR, 206 (data->phy << TSI108_MAC_MII_ADDR_PHY) | 207 (reg << TSI108_MAC_MII_ADDR_REG)); 208 TSI_WRITE_PHY(TSI108_MAC_MII_CMD, 0); 209 TSI_WRITE_PHY(TSI108_MAC_MII_CMD, TSI108_MAC_MII_CMD_READ); 210 for (i = 0; i < 100; i++) { 211 if (!(TSI_READ_PHY(TSI108_MAC_MII_IND) & 212 (TSI108_MAC_MII_IND_NOTVALID | TSI108_MAC_MII_IND_BUSY))) 213 break; 214 udelay(10); 215 } 216 217 if (i == 100) 218 return 0xffff; 219 else 220 return TSI_READ_PHY(TSI108_MAC_MII_DATAIN); 221 } 222 223 static void tsi108_write_mii(struct tsi108_prv_data *data, 224 int reg, u16 val) 225 { 226 unsigned i = 100; 227 TSI_WRITE_PHY(TSI108_MAC_MII_ADDR, 228 (data->phy << TSI108_MAC_MII_ADDR_PHY) | 229 (reg << TSI108_MAC_MII_ADDR_REG)); 230 TSI_WRITE_PHY(TSI108_MAC_MII_DATAOUT, val); 231 while (i--) { 232 if(!(TSI_READ_PHY(TSI108_MAC_MII_IND) & 233 TSI108_MAC_MII_IND_BUSY)) 234 break; 235 udelay(10); 236 } 237 } 238 239 static int tsi108_mdio_read(struct net_device *dev, int addr, int reg) 240 { 241 struct tsi108_prv_data *data = netdev_priv(dev); 242 return tsi108_read_mii(data, reg); 243 } 244 245 static void tsi108_mdio_write(struct net_device *dev, int addr, int reg, int val) 246 { 247 struct tsi108_prv_data *data = netdev_priv(dev); 248 tsi108_write_mii(data, reg, val); 249 } 250 251 static inline void tsi108_write_tbi(struct tsi108_prv_data *data, 252 int reg, u16 val) 253 { 254 unsigned i = 1000; 255 TSI_WRITE(TSI108_MAC_MII_ADDR, 256 (0x1e << TSI108_MAC_MII_ADDR_PHY) 257 | (reg << TSI108_MAC_MII_ADDR_REG)); 258 TSI_WRITE(TSI108_MAC_MII_DATAOUT, val); 259 while(i--) { 260 if(!(TSI_READ(TSI108_MAC_MII_IND) & TSI108_MAC_MII_IND_BUSY)) 261 return; 262 udelay(10); 263 } 264 printk(KERN_ERR "%s function time out\n", __func__); 265 } 266 267 static int mii_speed(struct mii_if_info *mii) 268 { 269 int advert, lpa, val, media; 270 int lpa2 = 0; 271 int speed; 272 273 if (!mii_link_ok(mii)) 274 return 0; 275 276 val = (*mii->mdio_read) (mii->dev, mii->phy_id, MII_BMSR); 277 if ((val & BMSR_ANEGCOMPLETE) == 0) 278 return 0; 279 280 advert = (*mii->mdio_read) (mii->dev, mii->phy_id, MII_ADVERTISE); 281 lpa = (*mii->mdio_read) (mii->dev, mii->phy_id, MII_LPA); 282 media = mii_nway_result(advert & lpa); 283 284 if (mii->supports_gmii) 285 lpa2 = mii->mdio_read(mii->dev, mii->phy_id, MII_STAT1000); 286 287 speed = lpa2 & (LPA_1000FULL | LPA_1000HALF) ? 1000 : 288 (media & (ADVERTISE_100FULL | ADVERTISE_100HALF) ? 100 : 10); 289 return speed; 290 } 291 292 static void tsi108_check_phy(struct net_device *dev) 293 { 294 struct tsi108_prv_data *data = netdev_priv(dev); 295 u32 mac_cfg2_reg, portctrl_reg; 296 u32 duplex; 297 u32 speed; 298 unsigned long flags; 299 300 spin_lock_irqsave(&phy_lock, flags); 301 302 if (!data->phy_ok) 303 goto out; 304 305 duplex = mii_check_media(&data->mii_if, netif_msg_link(data), data->init_media); 306 data->init_media = 0; 307 308 if (netif_carrier_ok(dev)) { 309 310 speed = mii_speed(&data->mii_if); 311 312 if ((speed != data->speed) || duplex) { 313 314 mac_cfg2_reg = TSI_READ(TSI108_MAC_CFG2); 315 portctrl_reg = TSI_READ(TSI108_EC_PORTCTRL); 316 317 mac_cfg2_reg &= ~TSI108_MAC_CFG2_IFACE_MASK; 318 319 if (speed == 1000) { 320 mac_cfg2_reg |= TSI108_MAC_CFG2_GIG; 321 portctrl_reg &= ~TSI108_EC_PORTCTRL_NOGIG; 322 } else { 323 mac_cfg2_reg |= TSI108_MAC_CFG2_NOGIG; 324 portctrl_reg |= TSI108_EC_PORTCTRL_NOGIG; 325 } 326 327 data->speed = speed; 328 329 if (data->mii_if.full_duplex) { 330 mac_cfg2_reg |= TSI108_MAC_CFG2_FULLDUPLEX; 331 portctrl_reg &= ~TSI108_EC_PORTCTRL_HALFDUPLEX; 332 data->duplex = 2; 333 } else { 334 mac_cfg2_reg &= ~TSI108_MAC_CFG2_FULLDUPLEX; 335 portctrl_reg |= TSI108_EC_PORTCTRL_HALFDUPLEX; 336 data->duplex = 1; 337 } 338 339 TSI_WRITE(TSI108_MAC_CFG2, mac_cfg2_reg); 340 TSI_WRITE(TSI108_EC_PORTCTRL, portctrl_reg); 341 } 342 343 if (data->link_up == 0) { 344 /* The manual says it can take 3-4 usecs for the speed change 345 * to take effect. 346 */ 347 udelay(5); 348 349 spin_lock(&data->txlock); 350 if (is_valid_ether_addr(dev->dev_addr) && data->txfree) 351 netif_wake_queue(dev); 352 353 data->link_up = 1; 354 spin_unlock(&data->txlock); 355 } 356 } else { 357 if (data->link_up == 1) { 358 netif_stop_queue(dev); 359 data->link_up = 0; 360 printk(KERN_NOTICE "%s : link is down\n", dev->name); 361 } 362 363 goto out; 364 } 365 366 367 out: 368 spin_unlock_irqrestore(&phy_lock, flags); 369 } 370 371 static inline void 372 tsi108_stat_carry_one(int carry, int carry_bit, int carry_shift, 373 unsigned long *upper) 374 { 375 if (carry & carry_bit) 376 *upper += carry_shift; 377 } 378 379 static void tsi108_stat_carry(struct net_device *dev) 380 { 381 struct tsi108_prv_data *data = netdev_priv(dev); 382 u32 carry1, carry2; 383 384 spin_lock_irq(&data->misclock); 385 386 carry1 = TSI_READ(TSI108_STAT_CARRY1); 387 carry2 = TSI_READ(TSI108_STAT_CARRY2); 388 389 TSI_WRITE(TSI108_STAT_CARRY1, carry1); 390 TSI_WRITE(TSI108_STAT_CARRY2, carry2); 391 392 tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXBYTES, 393 TSI108_STAT_RXBYTES_CARRY, &data->stats.rx_bytes); 394 395 tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXPKTS, 396 TSI108_STAT_RXPKTS_CARRY, 397 &data->stats.rx_packets); 398 399 tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXFCS, 400 TSI108_STAT_RXFCS_CARRY, &data->rx_fcs); 401 402 tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXMCAST, 403 TSI108_STAT_RXMCAST_CARRY, 404 &data->stats.multicast); 405 406 tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXALIGN, 407 TSI108_STAT_RXALIGN_CARRY, 408 &data->stats.rx_frame_errors); 409 410 tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXLENGTH, 411 TSI108_STAT_RXLENGTH_CARRY, 412 &data->stats.rx_length_errors); 413 414 tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXRUNT, 415 TSI108_STAT_RXRUNT_CARRY, &data->rx_underruns); 416 417 tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXJUMBO, 418 TSI108_STAT_RXJUMBO_CARRY, &data->rx_overruns); 419 420 tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXFRAG, 421 TSI108_STAT_RXFRAG_CARRY, &data->rx_short_fcs); 422 423 tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXJABBER, 424 TSI108_STAT_RXJABBER_CARRY, &data->rx_long_fcs); 425 426 tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXDROP, 427 TSI108_STAT_RXDROP_CARRY, 428 &data->stats.rx_missed_errors); 429 430 tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXBYTES, 431 TSI108_STAT_TXBYTES_CARRY, &data->stats.tx_bytes); 432 433 tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXPKTS, 434 TSI108_STAT_TXPKTS_CARRY, 435 &data->stats.tx_packets); 436 437 tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXEXDEF, 438 TSI108_STAT_TXEXDEF_CARRY, 439 &data->stats.tx_aborted_errors); 440 441 tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXEXCOL, 442 TSI108_STAT_TXEXCOL_CARRY, &data->tx_coll_abort); 443 444 tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXTCOL, 445 TSI108_STAT_TXTCOL_CARRY, 446 &data->stats.collisions); 447 448 tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXPAUSE, 449 TSI108_STAT_TXPAUSEDROP_CARRY, 450 &data->tx_pause_drop); 451 452 spin_unlock_irq(&data->misclock); 453 } 454 455 /* Read a stat counter atomically with respect to carries. 456 * data->misclock must be held. 457 */ 458 static inline unsigned long 459 tsi108_read_stat(struct tsi108_prv_data * data, int reg, int carry_bit, 460 int carry_shift, unsigned long *upper) 461 { 462 int carryreg; 463 unsigned long val; 464 465 if (reg < 0xb0) 466 carryreg = TSI108_STAT_CARRY1; 467 else 468 carryreg = TSI108_STAT_CARRY2; 469 470 again: 471 val = TSI_READ(reg) | *upper; 472 473 /* Check to see if it overflowed, but the interrupt hasn't 474 * been serviced yet. If so, handle the carry here, and 475 * try again. 476 */ 477 478 if (unlikely(TSI_READ(carryreg) & carry_bit)) { 479 *upper += carry_shift; 480 TSI_WRITE(carryreg, carry_bit); 481 goto again; 482 } 483 484 return val; 485 } 486 487 static struct net_device_stats *tsi108_get_stats(struct net_device *dev) 488 { 489 unsigned long excol; 490 491 struct tsi108_prv_data *data = netdev_priv(dev); 492 spin_lock_irq(&data->misclock); 493 494 data->tmpstats.rx_packets = 495 tsi108_read_stat(data, TSI108_STAT_RXPKTS, 496 TSI108_STAT_CARRY1_RXPKTS, 497 TSI108_STAT_RXPKTS_CARRY, &data->stats.rx_packets); 498 499 data->tmpstats.tx_packets = 500 tsi108_read_stat(data, TSI108_STAT_TXPKTS, 501 TSI108_STAT_CARRY2_TXPKTS, 502 TSI108_STAT_TXPKTS_CARRY, &data->stats.tx_packets); 503 504 data->tmpstats.rx_bytes = 505 tsi108_read_stat(data, TSI108_STAT_RXBYTES, 506 TSI108_STAT_CARRY1_RXBYTES, 507 TSI108_STAT_RXBYTES_CARRY, &data->stats.rx_bytes); 508 509 data->tmpstats.tx_bytes = 510 tsi108_read_stat(data, TSI108_STAT_TXBYTES, 511 TSI108_STAT_CARRY2_TXBYTES, 512 TSI108_STAT_TXBYTES_CARRY, &data->stats.tx_bytes); 513 514 data->tmpstats.multicast = 515 tsi108_read_stat(data, TSI108_STAT_RXMCAST, 516 TSI108_STAT_CARRY1_RXMCAST, 517 TSI108_STAT_RXMCAST_CARRY, &data->stats.multicast); 518 519 excol = tsi108_read_stat(data, TSI108_STAT_TXEXCOL, 520 TSI108_STAT_CARRY2_TXEXCOL, 521 TSI108_STAT_TXEXCOL_CARRY, 522 &data->tx_coll_abort); 523 524 data->tmpstats.collisions = 525 tsi108_read_stat(data, TSI108_STAT_TXTCOL, 526 TSI108_STAT_CARRY2_TXTCOL, 527 TSI108_STAT_TXTCOL_CARRY, &data->stats.collisions); 528 529 data->tmpstats.collisions += excol; 530 531 data->tmpstats.rx_length_errors = 532 tsi108_read_stat(data, TSI108_STAT_RXLENGTH, 533 TSI108_STAT_CARRY1_RXLENGTH, 534 TSI108_STAT_RXLENGTH_CARRY, 535 &data->stats.rx_length_errors); 536 537 data->tmpstats.rx_length_errors += 538 tsi108_read_stat(data, TSI108_STAT_RXRUNT, 539 TSI108_STAT_CARRY1_RXRUNT, 540 TSI108_STAT_RXRUNT_CARRY, &data->rx_underruns); 541 542 data->tmpstats.rx_length_errors += 543 tsi108_read_stat(data, TSI108_STAT_RXJUMBO, 544 TSI108_STAT_CARRY1_RXJUMBO, 545 TSI108_STAT_RXJUMBO_CARRY, &data->rx_overruns); 546 547 data->tmpstats.rx_frame_errors = 548 tsi108_read_stat(data, TSI108_STAT_RXALIGN, 549 TSI108_STAT_CARRY1_RXALIGN, 550 TSI108_STAT_RXALIGN_CARRY, 551 &data->stats.rx_frame_errors); 552 553 data->tmpstats.rx_frame_errors += 554 tsi108_read_stat(data, TSI108_STAT_RXFCS, 555 TSI108_STAT_CARRY1_RXFCS, TSI108_STAT_RXFCS_CARRY, 556 &data->rx_fcs); 557 558 data->tmpstats.rx_frame_errors += 559 tsi108_read_stat(data, TSI108_STAT_RXFRAG, 560 TSI108_STAT_CARRY1_RXFRAG, 561 TSI108_STAT_RXFRAG_CARRY, &data->rx_short_fcs); 562 563 data->tmpstats.rx_missed_errors = 564 tsi108_read_stat(data, TSI108_STAT_RXDROP, 565 TSI108_STAT_CARRY1_RXDROP, 566 TSI108_STAT_RXDROP_CARRY, 567 &data->stats.rx_missed_errors); 568 569 /* These three are maintained by software. */ 570 data->tmpstats.rx_fifo_errors = data->stats.rx_fifo_errors; 571 data->tmpstats.rx_crc_errors = data->stats.rx_crc_errors; 572 573 data->tmpstats.tx_aborted_errors = 574 tsi108_read_stat(data, TSI108_STAT_TXEXDEF, 575 TSI108_STAT_CARRY2_TXEXDEF, 576 TSI108_STAT_TXEXDEF_CARRY, 577 &data->stats.tx_aborted_errors); 578 579 data->tmpstats.tx_aborted_errors += 580 tsi108_read_stat(data, TSI108_STAT_TXPAUSEDROP, 581 TSI108_STAT_CARRY2_TXPAUSE, 582 TSI108_STAT_TXPAUSEDROP_CARRY, 583 &data->tx_pause_drop); 584 585 data->tmpstats.tx_aborted_errors += excol; 586 587 data->tmpstats.tx_errors = data->tmpstats.tx_aborted_errors; 588 data->tmpstats.rx_errors = data->tmpstats.rx_length_errors + 589 data->tmpstats.rx_crc_errors + 590 data->tmpstats.rx_frame_errors + 591 data->tmpstats.rx_fifo_errors + data->tmpstats.rx_missed_errors; 592 593 spin_unlock_irq(&data->misclock); 594 return &data->tmpstats; 595 } 596 597 static void tsi108_restart_rx(struct tsi108_prv_data * data, struct net_device *dev) 598 { 599 TSI_WRITE(TSI108_EC_RXQ_PTRHIGH, 600 TSI108_EC_RXQ_PTRHIGH_VALID); 601 602 TSI_WRITE(TSI108_EC_RXCTRL, TSI108_EC_RXCTRL_GO 603 | TSI108_EC_RXCTRL_QUEUE0); 604 } 605 606 static void tsi108_restart_tx(struct tsi108_prv_data * data) 607 { 608 TSI_WRITE(TSI108_EC_TXQ_PTRHIGH, 609 TSI108_EC_TXQ_PTRHIGH_VALID); 610 611 TSI_WRITE(TSI108_EC_TXCTRL, TSI108_EC_TXCTRL_IDLEINT | 612 TSI108_EC_TXCTRL_GO | TSI108_EC_TXCTRL_QUEUE0); 613 } 614 615 /* txlock must be held by caller, with IRQs disabled, and 616 * with permission to re-enable them when the lock is dropped. 617 */ 618 static void tsi108_complete_tx(struct net_device *dev) 619 { 620 struct tsi108_prv_data *data = netdev_priv(dev); 621 int tx; 622 struct sk_buff *skb; 623 int release = 0; 624 625 while (!data->txfree || data->txhead != data->txtail) { 626 tx = data->txtail; 627 628 if (data->txring[tx].misc & TSI108_TX_OWN) 629 break; 630 631 skb = data->txskbs[tx]; 632 633 if (!(data->txring[tx].misc & TSI108_TX_OK)) 634 printk("%s: bad tx packet, misc %x\n", 635 dev->name, data->txring[tx].misc); 636 637 data->txtail = (data->txtail + 1) % TSI108_TXRING_LEN; 638 data->txfree++; 639 640 if (data->txring[tx].misc & TSI108_TX_EOF) { 641 dev_kfree_skb_any(skb); 642 release++; 643 } 644 } 645 646 if (release) { 647 if (is_valid_ether_addr(dev->dev_addr) && data->link_up) 648 netif_wake_queue(dev); 649 } 650 } 651 652 static int tsi108_send_packet(struct sk_buff * skb, struct net_device *dev) 653 { 654 struct tsi108_prv_data *data = netdev_priv(dev); 655 int frags = skb_shinfo(skb)->nr_frags + 1; 656 int i; 657 658 if (!data->phy_ok && net_ratelimit()) 659 printk(KERN_ERR "%s: Transmit while PHY is down!\n", dev->name); 660 661 if (!data->link_up) { 662 printk(KERN_ERR "%s: Transmit while link is down!\n", 663 dev->name); 664 netif_stop_queue(dev); 665 return NETDEV_TX_BUSY; 666 } 667 668 if (data->txfree < MAX_SKB_FRAGS + 1) { 669 netif_stop_queue(dev); 670 671 if (net_ratelimit()) 672 printk(KERN_ERR "%s: Transmit with full tx ring!\n", 673 dev->name); 674 return NETDEV_TX_BUSY; 675 } 676 677 if (data->txfree - frags < MAX_SKB_FRAGS + 1) { 678 netif_stop_queue(dev); 679 } 680 681 spin_lock_irq(&data->txlock); 682 683 for (i = 0; i < frags; i++) { 684 int misc = 0; 685 int tx = data->txhead; 686 687 /* This is done to mark every TSI108_TX_INT_FREQ tx buffers with 688 * the interrupt bit. TX descriptor-complete interrupts are 689 * enabled when the queue fills up, and masked when there is 690 * still free space. This way, when saturating the outbound 691 * link, the tx interrupts are kept to a reasonable level. 692 * When the queue is not full, reclamation of skbs still occurs 693 * as new packets are transmitted, or on a queue-empty 694 * interrupt. 695 */ 696 697 if ((tx % TSI108_TX_INT_FREQ == 0) && 698 ((TSI108_TXRING_LEN - data->txfree) >= TSI108_TX_INT_FREQ)) 699 misc = TSI108_TX_INT; 700 701 data->txskbs[tx] = skb; 702 703 if (i == 0) { 704 data->txring[tx].buf0 = dma_map_single(NULL, skb->data, 705 skb_headlen(skb), DMA_TO_DEVICE); 706 data->txring[tx].len = skb_headlen(skb); 707 misc |= TSI108_TX_SOF; 708 } else { 709 const skb_frag_t *frag = &skb_shinfo(skb)->frags[i - 1]; 710 711 data->txring[tx].buf0 = skb_frag_dma_map(NULL, frag, 712 0, 713 skb_frag_size(frag), 714 DMA_TO_DEVICE); 715 data->txring[tx].len = skb_frag_size(frag); 716 } 717 718 if (i == frags - 1) 719 misc |= TSI108_TX_EOF; 720 721 if (netif_msg_pktdata(data)) { 722 int i; 723 printk("%s: Tx Frame contents (%d)\n", dev->name, 724 skb->len); 725 for (i = 0; i < skb->len; i++) 726 printk(" %2.2x", skb->data[i]); 727 printk(".\n"); 728 } 729 data->txring[tx].misc = misc | TSI108_TX_OWN; 730 731 data->txhead = (data->txhead + 1) % TSI108_TXRING_LEN; 732 data->txfree--; 733 } 734 735 tsi108_complete_tx(dev); 736 737 /* This must be done after the check for completed tx descriptors, 738 * so that the tail pointer is correct. 739 */ 740 741 if (!(TSI_READ(TSI108_EC_TXSTAT) & TSI108_EC_TXSTAT_QUEUE0)) 742 tsi108_restart_tx(data); 743 744 spin_unlock_irq(&data->txlock); 745 return NETDEV_TX_OK; 746 } 747 748 static int tsi108_complete_rx(struct net_device *dev, int budget) 749 { 750 struct tsi108_prv_data *data = netdev_priv(dev); 751 int done = 0; 752 753 while (data->rxfree && done != budget) { 754 int rx = data->rxtail; 755 struct sk_buff *skb; 756 757 if (data->rxring[rx].misc & TSI108_RX_OWN) 758 break; 759 760 skb = data->rxskbs[rx]; 761 data->rxtail = (data->rxtail + 1) % TSI108_RXRING_LEN; 762 data->rxfree--; 763 done++; 764 765 if (data->rxring[rx].misc & TSI108_RX_BAD) { 766 spin_lock_irq(&data->misclock); 767 768 if (data->rxring[rx].misc & TSI108_RX_CRC) 769 data->stats.rx_crc_errors++; 770 if (data->rxring[rx].misc & TSI108_RX_OVER) 771 data->stats.rx_fifo_errors++; 772 773 spin_unlock_irq(&data->misclock); 774 775 dev_kfree_skb_any(skb); 776 continue; 777 } 778 if (netif_msg_pktdata(data)) { 779 int i; 780 printk("%s: Rx Frame contents (%d)\n", 781 dev->name, data->rxring[rx].len); 782 for (i = 0; i < data->rxring[rx].len; i++) 783 printk(" %2.2x", skb->data[i]); 784 printk(".\n"); 785 } 786 787 skb_put(skb, data->rxring[rx].len); 788 skb->protocol = eth_type_trans(skb, dev); 789 netif_receive_skb(skb); 790 } 791 792 return done; 793 } 794 795 static int tsi108_refill_rx(struct net_device *dev, int budget) 796 { 797 struct tsi108_prv_data *data = netdev_priv(dev); 798 int done = 0; 799 800 while (data->rxfree != TSI108_RXRING_LEN && done != budget) { 801 int rx = data->rxhead; 802 struct sk_buff *skb; 803 804 skb = netdev_alloc_skb_ip_align(dev, TSI108_RXBUF_SIZE); 805 data->rxskbs[rx] = skb; 806 if (!skb) 807 break; 808 809 data->rxring[rx].buf0 = dma_map_single(NULL, skb->data, 810 TSI108_RX_SKB_SIZE, 811 DMA_FROM_DEVICE); 812 813 /* Sometimes the hardware sets blen to zero after packet 814 * reception, even though the manual says that it's only ever 815 * modified by the driver. 816 */ 817 818 data->rxring[rx].blen = TSI108_RX_SKB_SIZE; 819 data->rxring[rx].misc = TSI108_RX_OWN | TSI108_RX_INT; 820 821 data->rxhead = (data->rxhead + 1) % TSI108_RXRING_LEN; 822 data->rxfree++; 823 done++; 824 } 825 826 if (done != 0 && !(TSI_READ(TSI108_EC_RXSTAT) & 827 TSI108_EC_RXSTAT_QUEUE0)) 828 tsi108_restart_rx(data, dev); 829 830 return done; 831 } 832 833 static int tsi108_poll(struct napi_struct *napi, int budget) 834 { 835 struct tsi108_prv_data *data = container_of(napi, struct tsi108_prv_data, napi); 836 struct net_device *dev = data->dev; 837 u32 estat = TSI_READ(TSI108_EC_RXESTAT); 838 u32 intstat = TSI_READ(TSI108_EC_INTSTAT); 839 int num_received = 0, num_filled = 0; 840 841 intstat &= TSI108_INT_RXQUEUE0 | TSI108_INT_RXTHRESH | 842 TSI108_INT_RXOVERRUN | TSI108_INT_RXERROR | TSI108_INT_RXWAIT; 843 844 TSI_WRITE(TSI108_EC_RXESTAT, estat); 845 TSI_WRITE(TSI108_EC_INTSTAT, intstat); 846 847 if (data->rxpending || (estat & TSI108_EC_RXESTAT_Q0_DESCINT)) 848 num_received = tsi108_complete_rx(dev, budget); 849 850 /* This should normally fill no more slots than the number of 851 * packets received in tsi108_complete_rx(). The exception 852 * is when we previously ran out of memory for RX SKBs. In that 853 * case, it's helpful to obey the budget, not only so that the 854 * CPU isn't hogged, but so that memory (which may still be low) 855 * is not hogged by one device. 856 * 857 * A work unit is considered to be two SKBs to allow us to catch 858 * up when the ring has shrunk due to out-of-memory but we're 859 * still removing the full budget's worth of packets each time. 860 */ 861 862 if (data->rxfree < TSI108_RXRING_LEN) 863 num_filled = tsi108_refill_rx(dev, budget * 2); 864 865 if (intstat & TSI108_INT_RXERROR) { 866 u32 err = TSI_READ(TSI108_EC_RXERR); 867 TSI_WRITE(TSI108_EC_RXERR, err); 868 869 if (err) { 870 if (net_ratelimit()) 871 printk(KERN_DEBUG "%s: RX error %x\n", 872 dev->name, err); 873 874 if (!(TSI_READ(TSI108_EC_RXSTAT) & 875 TSI108_EC_RXSTAT_QUEUE0)) 876 tsi108_restart_rx(data, dev); 877 } 878 } 879 880 if (intstat & TSI108_INT_RXOVERRUN) { 881 spin_lock_irq(&data->misclock); 882 data->stats.rx_fifo_errors++; 883 spin_unlock_irq(&data->misclock); 884 } 885 886 if (num_received < budget) { 887 data->rxpending = 0; 888 napi_complete(napi); 889 890 TSI_WRITE(TSI108_EC_INTMASK, 891 TSI_READ(TSI108_EC_INTMASK) 892 & ~(TSI108_INT_RXQUEUE0 893 | TSI108_INT_RXTHRESH | 894 TSI108_INT_RXOVERRUN | 895 TSI108_INT_RXERROR | 896 TSI108_INT_RXWAIT)); 897 } else { 898 data->rxpending = 1; 899 } 900 901 return num_received; 902 } 903 904 static void tsi108_rx_int(struct net_device *dev) 905 { 906 struct tsi108_prv_data *data = netdev_priv(dev); 907 908 /* A race could cause dev to already be scheduled, so it's not an 909 * error if that happens (and interrupts shouldn't be re-masked, 910 * because that can cause harmful races, if poll has already 911 * unmasked them but not cleared LINK_STATE_SCHED). 912 * 913 * This can happen if this code races with tsi108_poll(), which masks 914 * the interrupts after tsi108_irq_one() read the mask, but before 915 * napi_schedule is called. It could also happen due to calls 916 * from tsi108_check_rxring(). 917 */ 918 919 if (napi_schedule_prep(&data->napi)) { 920 /* Mask, rather than ack, the receive interrupts. The ack 921 * will happen in tsi108_poll(). 922 */ 923 924 TSI_WRITE(TSI108_EC_INTMASK, 925 TSI_READ(TSI108_EC_INTMASK) | 926 TSI108_INT_RXQUEUE0 927 | TSI108_INT_RXTHRESH | 928 TSI108_INT_RXOVERRUN | TSI108_INT_RXERROR | 929 TSI108_INT_RXWAIT); 930 __napi_schedule(&data->napi); 931 } else { 932 if (!netif_running(dev)) { 933 /* This can happen if an interrupt occurs while the 934 * interface is being brought down, as the START 935 * bit is cleared before the stop function is called. 936 * 937 * In this case, the interrupts must be masked, or 938 * they will continue indefinitely. 939 * 940 * There's a race here if the interface is brought down 941 * and then up in rapid succession, as the device could 942 * be made running after the above check and before 943 * the masking below. This will only happen if the IRQ 944 * thread has a lower priority than the task brining 945 * up the interface. Fixing this race would likely 946 * require changes in generic code. 947 */ 948 949 TSI_WRITE(TSI108_EC_INTMASK, 950 TSI_READ 951 (TSI108_EC_INTMASK) | 952 TSI108_INT_RXQUEUE0 | 953 TSI108_INT_RXTHRESH | 954 TSI108_INT_RXOVERRUN | 955 TSI108_INT_RXERROR | 956 TSI108_INT_RXWAIT); 957 } 958 } 959 } 960 961 /* If the RX ring has run out of memory, try periodically 962 * to allocate some more, as otherwise poll would never 963 * get called (apart from the initial end-of-queue condition). 964 * 965 * This is called once per second (by default) from the thread. 966 */ 967 968 static void tsi108_check_rxring(struct net_device *dev) 969 { 970 struct tsi108_prv_data *data = netdev_priv(dev); 971 972 /* A poll is scheduled, as opposed to caling tsi108_refill_rx 973 * directly, so as to keep the receive path single-threaded 974 * (and thus not needing a lock). 975 */ 976 977 if (netif_running(dev) && data->rxfree < TSI108_RXRING_LEN / 4) 978 tsi108_rx_int(dev); 979 } 980 981 static void tsi108_tx_int(struct net_device *dev) 982 { 983 struct tsi108_prv_data *data = netdev_priv(dev); 984 u32 estat = TSI_READ(TSI108_EC_TXESTAT); 985 986 TSI_WRITE(TSI108_EC_TXESTAT, estat); 987 TSI_WRITE(TSI108_EC_INTSTAT, TSI108_INT_TXQUEUE0 | 988 TSI108_INT_TXIDLE | TSI108_INT_TXERROR); 989 if (estat & TSI108_EC_TXESTAT_Q0_ERR) { 990 u32 err = TSI_READ(TSI108_EC_TXERR); 991 TSI_WRITE(TSI108_EC_TXERR, err); 992 993 if (err && net_ratelimit()) 994 printk(KERN_ERR "%s: TX error %x\n", dev->name, err); 995 } 996 997 if (estat & (TSI108_EC_TXESTAT_Q0_DESCINT | TSI108_EC_TXESTAT_Q0_EOQ)) { 998 spin_lock(&data->txlock); 999 tsi108_complete_tx(dev); 1000 spin_unlock(&data->txlock); 1001 } 1002 } 1003 1004 1005 static irqreturn_t tsi108_irq(int irq, void *dev_id) 1006 { 1007 struct net_device *dev = dev_id; 1008 struct tsi108_prv_data *data = netdev_priv(dev); 1009 u32 stat = TSI_READ(TSI108_EC_INTSTAT); 1010 1011 if (!(stat & TSI108_INT_ANY)) 1012 return IRQ_NONE; /* Not our interrupt */ 1013 1014 stat &= ~TSI_READ(TSI108_EC_INTMASK); 1015 1016 if (stat & (TSI108_INT_TXQUEUE0 | TSI108_INT_TXIDLE | 1017 TSI108_INT_TXERROR)) 1018 tsi108_tx_int(dev); 1019 if (stat & (TSI108_INT_RXQUEUE0 | TSI108_INT_RXTHRESH | 1020 TSI108_INT_RXWAIT | TSI108_INT_RXOVERRUN | 1021 TSI108_INT_RXERROR)) 1022 tsi108_rx_int(dev); 1023 1024 if (stat & TSI108_INT_SFN) { 1025 if (net_ratelimit()) 1026 printk(KERN_DEBUG "%s: SFN error\n", dev->name); 1027 TSI_WRITE(TSI108_EC_INTSTAT, TSI108_INT_SFN); 1028 } 1029 1030 if (stat & TSI108_INT_STATCARRY) { 1031 tsi108_stat_carry(dev); 1032 TSI_WRITE(TSI108_EC_INTSTAT, TSI108_INT_STATCARRY); 1033 } 1034 1035 return IRQ_HANDLED; 1036 } 1037 1038 static void tsi108_stop_ethernet(struct net_device *dev) 1039 { 1040 struct tsi108_prv_data *data = netdev_priv(dev); 1041 int i = 1000; 1042 /* Disable all TX and RX queues ... */ 1043 TSI_WRITE(TSI108_EC_TXCTRL, 0); 1044 TSI_WRITE(TSI108_EC_RXCTRL, 0); 1045 1046 /* ...and wait for them to become idle */ 1047 while(i--) { 1048 if(!(TSI_READ(TSI108_EC_TXSTAT) & TSI108_EC_TXSTAT_ACTIVE)) 1049 break; 1050 udelay(10); 1051 } 1052 i = 1000; 1053 while(i--){ 1054 if(!(TSI_READ(TSI108_EC_RXSTAT) & TSI108_EC_RXSTAT_ACTIVE)) 1055 return; 1056 udelay(10); 1057 } 1058 printk(KERN_ERR "%s function time out\n", __func__); 1059 } 1060 1061 static void tsi108_reset_ether(struct tsi108_prv_data * data) 1062 { 1063 TSI_WRITE(TSI108_MAC_CFG1, TSI108_MAC_CFG1_SOFTRST); 1064 udelay(100); 1065 TSI_WRITE(TSI108_MAC_CFG1, 0); 1066 1067 TSI_WRITE(TSI108_EC_PORTCTRL, TSI108_EC_PORTCTRL_STATRST); 1068 udelay(100); 1069 TSI_WRITE(TSI108_EC_PORTCTRL, 1070 TSI_READ(TSI108_EC_PORTCTRL) & 1071 ~TSI108_EC_PORTCTRL_STATRST); 1072 1073 TSI_WRITE(TSI108_EC_TXCFG, TSI108_EC_TXCFG_RST); 1074 udelay(100); 1075 TSI_WRITE(TSI108_EC_TXCFG, 1076 TSI_READ(TSI108_EC_TXCFG) & 1077 ~TSI108_EC_TXCFG_RST); 1078 1079 TSI_WRITE(TSI108_EC_RXCFG, TSI108_EC_RXCFG_RST); 1080 udelay(100); 1081 TSI_WRITE(TSI108_EC_RXCFG, 1082 TSI_READ(TSI108_EC_RXCFG) & 1083 ~TSI108_EC_RXCFG_RST); 1084 1085 TSI_WRITE(TSI108_MAC_MII_MGMT_CFG, 1086 TSI_READ(TSI108_MAC_MII_MGMT_CFG) | 1087 TSI108_MAC_MII_MGMT_RST); 1088 udelay(100); 1089 TSI_WRITE(TSI108_MAC_MII_MGMT_CFG, 1090 (TSI_READ(TSI108_MAC_MII_MGMT_CFG) & 1091 ~(TSI108_MAC_MII_MGMT_RST | 1092 TSI108_MAC_MII_MGMT_CLK)) | 0x07); 1093 } 1094 1095 static int tsi108_get_mac(struct net_device *dev) 1096 { 1097 struct tsi108_prv_data *data = netdev_priv(dev); 1098 u32 word1 = TSI_READ(TSI108_MAC_ADDR1); 1099 u32 word2 = TSI_READ(TSI108_MAC_ADDR2); 1100 1101 /* Note that the octets are reversed from what the manual says, 1102 * producing an even weirder ordering... 1103 */ 1104 if (word2 == 0 && word1 == 0) { 1105 dev->dev_addr[0] = 0x00; 1106 dev->dev_addr[1] = 0x06; 1107 dev->dev_addr[2] = 0xd2; 1108 dev->dev_addr[3] = 0x00; 1109 dev->dev_addr[4] = 0x00; 1110 if (0x8 == data->phy) 1111 dev->dev_addr[5] = 0x01; 1112 else 1113 dev->dev_addr[5] = 0x02; 1114 1115 word2 = (dev->dev_addr[0] << 16) | (dev->dev_addr[1] << 24); 1116 1117 word1 = (dev->dev_addr[2] << 0) | (dev->dev_addr[3] << 8) | 1118 (dev->dev_addr[4] << 16) | (dev->dev_addr[5] << 24); 1119 1120 TSI_WRITE(TSI108_MAC_ADDR1, word1); 1121 TSI_WRITE(TSI108_MAC_ADDR2, word2); 1122 } else { 1123 dev->dev_addr[0] = (word2 >> 16) & 0xff; 1124 dev->dev_addr[1] = (word2 >> 24) & 0xff; 1125 dev->dev_addr[2] = (word1 >> 0) & 0xff; 1126 dev->dev_addr[3] = (word1 >> 8) & 0xff; 1127 dev->dev_addr[4] = (word1 >> 16) & 0xff; 1128 dev->dev_addr[5] = (word1 >> 24) & 0xff; 1129 } 1130 1131 if (!is_valid_ether_addr(dev->dev_addr)) { 1132 printk(KERN_ERR 1133 "%s: Invalid MAC address. word1: %08x, word2: %08x\n", 1134 dev->name, word1, word2); 1135 return -EINVAL; 1136 } 1137 1138 return 0; 1139 } 1140 1141 static int tsi108_set_mac(struct net_device *dev, void *addr) 1142 { 1143 struct tsi108_prv_data *data = netdev_priv(dev); 1144 u32 word1, word2; 1145 int i; 1146 1147 if (!is_valid_ether_addr(addr)) 1148 return -EADDRNOTAVAIL; 1149 1150 for (i = 0; i < 6; i++) 1151 /* +2 is for the offset of the HW addr type */ 1152 dev->dev_addr[i] = ((unsigned char *)addr)[i + 2]; 1153 1154 word2 = (dev->dev_addr[0] << 16) | (dev->dev_addr[1] << 24); 1155 1156 word1 = (dev->dev_addr[2] << 0) | (dev->dev_addr[3] << 8) | 1157 (dev->dev_addr[4] << 16) | (dev->dev_addr[5] << 24); 1158 1159 spin_lock_irq(&data->misclock); 1160 TSI_WRITE(TSI108_MAC_ADDR1, word1); 1161 TSI_WRITE(TSI108_MAC_ADDR2, word2); 1162 spin_lock(&data->txlock); 1163 1164 if (data->txfree && data->link_up) 1165 netif_wake_queue(dev); 1166 1167 spin_unlock(&data->txlock); 1168 spin_unlock_irq(&data->misclock); 1169 return 0; 1170 } 1171 1172 /* Protected by dev->xmit_lock. */ 1173 static void tsi108_set_rx_mode(struct net_device *dev) 1174 { 1175 struct tsi108_prv_data *data = netdev_priv(dev); 1176 u32 rxcfg = TSI_READ(TSI108_EC_RXCFG); 1177 1178 if (dev->flags & IFF_PROMISC) { 1179 rxcfg &= ~(TSI108_EC_RXCFG_UC_HASH | TSI108_EC_RXCFG_MC_HASH); 1180 rxcfg |= TSI108_EC_RXCFG_UFE | TSI108_EC_RXCFG_MFE; 1181 goto out; 1182 } 1183 1184 rxcfg &= ~(TSI108_EC_RXCFG_UFE | TSI108_EC_RXCFG_MFE); 1185 1186 if (dev->flags & IFF_ALLMULTI || !netdev_mc_empty(dev)) { 1187 int i; 1188 struct netdev_hw_addr *ha; 1189 rxcfg |= TSI108_EC_RXCFG_MFE | TSI108_EC_RXCFG_MC_HASH; 1190 1191 memset(data->mc_hash, 0, sizeof(data->mc_hash)); 1192 1193 netdev_for_each_mc_addr(ha, dev) { 1194 u32 hash, crc; 1195 1196 crc = ether_crc(6, ha->addr); 1197 hash = crc >> 23; 1198 __set_bit(hash, &data->mc_hash[0]); 1199 } 1200 1201 TSI_WRITE(TSI108_EC_HASHADDR, 1202 TSI108_EC_HASHADDR_AUTOINC | 1203 TSI108_EC_HASHADDR_MCAST); 1204 1205 for (i = 0; i < 16; i++) { 1206 /* The manual says that the hardware may drop 1207 * back-to-back writes to the data register. 1208 */ 1209 udelay(1); 1210 TSI_WRITE(TSI108_EC_HASHDATA, 1211 data->mc_hash[i]); 1212 } 1213 } 1214 1215 out: 1216 TSI_WRITE(TSI108_EC_RXCFG, rxcfg); 1217 } 1218 1219 static void tsi108_init_phy(struct net_device *dev) 1220 { 1221 struct tsi108_prv_data *data = netdev_priv(dev); 1222 u32 i = 0; 1223 u16 phyval = 0; 1224 unsigned long flags; 1225 1226 spin_lock_irqsave(&phy_lock, flags); 1227 1228 tsi108_write_mii(data, MII_BMCR, BMCR_RESET); 1229 while (--i) { 1230 if(!(tsi108_read_mii(data, MII_BMCR) & BMCR_RESET)) 1231 break; 1232 udelay(10); 1233 } 1234 if (i == 0) 1235 printk(KERN_ERR "%s function time out\n", __func__); 1236 1237 if (data->phy_type == TSI108_PHY_BCM54XX) { 1238 tsi108_write_mii(data, 0x09, 0x0300); 1239 tsi108_write_mii(data, 0x10, 0x1020); 1240 tsi108_write_mii(data, 0x1c, 0x8c00); 1241 } 1242 1243 tsi108_write_mii(data, 1244 MII_BMCR, 1245 BMCR_ANENABLE | BMCR_ANRESTART); 1246 while (tsi108_read_mii(data, MII_BMCR) & BMCR_ANRESTART) 1247 cpu_relax(); 1248 1249 /* Set G/MII mode and receive clock select in TBI control #2. The 1250 * second port won't work if this isn't done, even though we don't 1251 * use TBI mode. 1252 */ 1253 1254 tsi108_write_tbi(data, 0x11, 0x30); 1255 1256 /* FIXME: It seems to take more than 2 back-to-back reads to the 1257 * PHY_STAT register before the link up status bit is set. 1258 */ 1259 1260 data->link_up = 0; 1261 1262 while (!((phyval = tsi108_read_mii(data, MII_BMSR)) & 1263 BMSR_LSTATUS)) { 1264 if (i++ > (MII_READ_DELAY / 10)) { 1265 break; 1266 } 1267 spin_unlock_irqrestore(&phy_lock, flags); 1268 msleep(10); 1269 spin_lock_irqsave(&phy_lock, flags); 1270 } 1271 1272 data->mii_if.supports_gmii = mii_check_gmii_support(&data->mii_if); 1273 printk(KERN_DEBUG "PHY_STAT reg contains %08x\n", phyval); 1274 data->phy_ok = 1; 1275 data->init_media = 1; 1276 spin_unlock_irqrestore(&phy_lock, flags); 1277 } 1278 1279 static void tsi108_kill_phy(struct net_device *dev) 1280 { 1281 struct tsi108_prv_data *data = netdev_priv(dev); 1282 unsigned long flags; 1283 1284 spin_lock_irqsave(&phy_lock, flags); 1285 tsi108_write_mii(data, MII_BMCR, BMCR_PDOWN); 1286 data->phy_ok = 0; 1287 spin_unlock_irqrestore(&phy_lock, flags); 1288 } 1289 1290 static int tsi108_open(struct net_device *dev) 1291 { 1292 int i; 1293 struct tsi108_prv_data *data = netdev_priv(dev); 1294 unsigned int rxring_size = TSI108_RXRING_LEN * sizeof(rx_desc); 1295 unsigned int txring_size = TSI108_TXRING_LEN * sizeof(tx_desc); 1296 1297 i = request_irq(data->irq_num, tsi108_irq, 0, dev->name, dev); 1298 if (i != 0) { 1299 printk(KERN_ERR "tsi108_eth%d: Could not allocate IRQ%d.\n", 1300 data->id, data->irq_num); 1301 return i; 1302 } else { 1303 dev->irq = data->irq_num; 1304 printk(KERN_NOTICE 1305 "tsi108_open : Port %d Assigned IRQ %d to %s\n", 1306 data->id, dev->irq, dev->name); 1307 } 1308 1309 data->rxring = dma_zalloc_coherent(NULL, rxring_size, &data->rxdma, 1310 GFP_KERNEL); 1311 if (!data->rxring) 1312 return -ENOMEM; 1313 1314 data->txring = dma_zalloc_coherent(NULL, txring_size, &data->txdma, 1315 GFP_KERNEL); 1316 if (!data->txring) { 1317 pci_free_consistent(NULL, rxring_size, data->rxring, 1318 data->rxdma); 1319 return -ENOMEM; 1320 } 1321 1322 for (i = 0; i < TSI108_RXRING_LEN; i++) { 1323 data->rxring[i].next0 = data->rxdma + (i + 1) * sizeof(rx_desc); 1324 data->rxring[i].blen = TSI108_RXBUF_SIZE; 1325 data->rxring[i].vlan = 0; 1326 } 1327 1328 data->rxring[TSI108_RXRING_LEN - 1].next0 = data->rxdma; 1329 1330 data->rxtail = 0; 1331 data->rxhead = 0; 1332 1333 for (i = 0; i < TSI108_RXRING_LEN; i++) { 1334 struct sk_buff *skb; 1335 1336 skb = netdev_alloc_skb_ip_align(dev, TSI108_RXBUF_SIZE); 1337 if (!skb) { 1338 /* Bah. No memory for now, but maybe we'll get 1339 * some more later. 1340 * For now, we'll live with the smaller ring. 1341 */ 1342 printk(KERN_WARNING 1343 "%s: Could only allocate %d receive skb(s).\n", 1344 dev->name, i); 1345 data->rxhead = i; 1346 break; 1347 } 1348 1349 data->rxskbs[i] = skb; 1350 data->rxring[i].buf0 = virt_to_phys(data->rxskbs[i]->data); 1351 data->rxring[i].misc = TSI108_RX_OWN | TSI108_RX_INT; 1352 } 1353 1354 data->rxfree = i; 1355 TSI_WRITE(TSI108_EC_RXQ_PTRLOW, data->rxdma); 1356 1357 for (i = 0; i < TSI108_TXRING_LEN; i++) { 1358 data->txring[i].next0 = data->txdma + (i + 1) * sizeof(tx_desc); 1359 data->txring[i].misc = 0; 1360 } 1361 1362 data->txring[TSI108_TXRING_LEN - 1].next0 = data->txdma; 1363 data->txtail = 0; 1364 data->txhead = 0; 1365 data->txfree = TSI108_TXRING_LEN; 1366 TSI_WRITE(TSI108_EC_TXQ_PTRLOW, data->txdma); 1367 tsi108_init_phy(dev); 1368 1369 napi_enable(&data->napi); 1370 1371 setup_timer(&data->timer, tsi108_timed_checker, (unsigned long)dev); 1372 mod_timer(&data->timer, jiffies + 1); 1373 1374 tsi108_restart_rx(data, dev); 1375 1376 TSI_WRITE(TSI108_EC_INTSTAT, ~0); 1377 1378 TSI_WRITE(TSI108_EC_INTMASK, 1379 ~(TSI108_INT_TXQUEUE0 | TSI108_INT_RXERROR | 1380 TSI108_INT_RXTHRESH | TSI108_INT_RXQUEUE0 | 1381 TSI108_INT_RXOVERRUN | TSI108_INT_RXWAIT | 1382 TSI108_INT_SFN | TSI108_INT_STATCARRY)); 1383 1384 TSI_WRITE(TSI108_MAC_CFG1, 1385 TSI108_MAC_CFG1_RXEN | TSI108_MAC_CFG1_TXEN); 1386 netif_start_queue(dev); 1387 return 0; 1388 } 1389 1390 static int tsi108_close(struct net_device *dev) 1391 { 1392 struct tsi108_prv_data *data = netdev_priv(dev); 1393 1394 netif_stop_queue(dev); 1395 napi_disable(&data->napi); 1396 1397 del_timer_sync(&data->timer); 1398 1399 tsi108_stop_ethernet(dev); 1400 tsi108_kill_phy(dev); 1401 TSI_WRITE(TSI108_EC_INTMASK, ~0); 1402 TSI_WRITE(TSI108_MAC_CFG1, 0); 1403 1404 /* Check for any pending TX packets, and drop them. */ 1405 1406 while (!data->txfree || data->txhead != data->txtail) { 1407 int tx = data->txtail; 1408 struct sk_buff *skb; 1409 skb = data->txskbs[tx]; 1410 data->txtail = (data->txtail + 1) % TSI108_TXRING_LEN; 1411 data->txfree++; 1412 dev_kfree_skb(skb); 1413 } 1414 1415 free_irq(data->irq_num, dev); 1416 1417 /* Discard the RX ring. */ 1418 1419 while (data->rxfree) { 1420 int rx = data->rxtail; 1421 struct sk_buff *skb; 1422 1423 skb = data->rxskbs[rx]; 1424 data->rxtail = (data->rxtail + 1) % TSI108_RXRING_LEN; 1425 data->rxfree--; 1426 dev_kfree_skb(skb); 1427 } 1428 1429 dma_free_coherent(0, 1430 TSI108_RXRING_LEN * sizeof(rx_desc), 1431 data->rxring, data->rxdma); 1432 dma_free_coherent(0, 1433 TSI108_TXRING_LEN * sizeof(tx_desc), 1434 data->txring, data->txdma); 1435 1436 return 0; 1437 } 1438 1439 static void tsi108_init_mac(struct net_device *dev) 1440 { 1441 struct tsi108_prv_data *data = netdev_priv(dev); 1442 1443 TSI_WRITE(TSI108_MAC_CFG2, TSI108_MAC_CFG2_DFLT_PREAMBLE | 1444 TSI108_MAC_CFG2_PADCRC); 1445 1446 TSI_WRITE(TSI108_EC_TXTHRESH, 1447 (192 << TSI108_EC_TXTHRESH_STARTFILL) | 1448 (192 << TSI108_EC_TXTHRESH_STOPFILL)); 1449 1450 TSI_WRITE(TSI108_STAT_CARRYMASK1, 1451 ~(TSI108_STAT_CARRY1_RXBYTES | 1452 TSI108_STAT_CARRY1_RXPKTS | 1453 TSI108_STAT_CARRY1_RXFCS | 1454 TSI108_STAT_CARRY1_RXMCAST | 1455 TSI108_STAT_CARRY1_RXALIGN | 1456 TSI108_STAT_CARRY1_RXLENGTH | 1457 TSI108_STAT_CARRY1_RXRUNT | 1458 TSI108_STAT_CARRY1_RXJUMBO | 1459 TSI108_STAT_CARRY1_RXFRAG | 1460 TSI108_STAT_CARRY1_RXJABBER | 1461 TSI108_STAT_CARRY1_RXDROP)); 1462 1463 TSI_WRITE(TSI108_STAT_CARRYMASK2, 1464 ~(TSI108_STAT_CARRY2_TXBYTES | 1465 TSI108_STAT_CARRY2_TXPKTS | 1466 TSI108_STAT_CARRY2_TXEXDEF | 1467 TSI108_STAT_CARRY2_TXEXCOL | 1468 TSI108_STAT_CARRY2_TXTCOL | 1469 TSI108_STAT_CARRY2_TXPAUSE)); 1470 1471 TSI_WRITE(TSI108_EC_PORTCTRL, TSI108_EC_PORTCTRL_STATEN); 1472 TSI_WRITE(TSI108_MAC_CFG1, 0); 1473 1474 TSI_WRITE(TSI108_EC_RXCFG, 1475 TSI108_EC_RXCFG_SE | TSI108_EC_RXCFG_BFE); 1476 1477 TSI_WRITE(TSI108_EC_TXQ_CFG, TSI108_EC_TXQ_CFG_DESC_INT | 1478 TSI108_EC_TXQ_CFG_EOQ_OWN_INT | 1479 TSI108_EC_TXQ_CFG_WSWP | (TSI108_PBM_PORT << 1480 TSI108_EC_TXQ_CFG_SFNPORT)); 1481 1482 TSI_WRITE(TSI108_EC_RXQ_CFG, TSI108_EC_RXQ_CFG_DESC_INT | 1483 TSI108_EC_RXQ_CFG_EOQ_OWN_INT | 1484 TSI108_EC_RXQ_CFG_WSWP | (TSI108_PBM_PORT << 1485 TSI108_EC_RXQ_CFG_SFNPORT)); 1486 1487 TSI_WRITE(TSI108_EC_TXQ_BUFCFG, 1488 TSI108_EC_TXQ_BUFCFG_BURST256 | 1489 TSI108_EC_TXQ_BUFCFG_BSWP | (TSI108_PBM_PORT << 1490 TSI108_EC_TXQ_BUFCFG_SFNPORT)); 1491 1492 TSI_WRITE(TSI108_EC_RXQ_BUFCFG, 1493 TSI108_EC_RXQ_BUFCFG_BURST256 | 1494 TSI108_EC_RXQ_BUFCFG_BSWP | (TSI108_PBM_PORT << 1495 TSI108_EC_RXQ_BUFCFG_SFNPORT)); 1496 1497 TSI_WRITE(TSI108_EC_INTMASK, ~0); 1498 } 1499 1500 static int tsi108_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) 1501 { 1502 struct tsi108_prv_data *data = netdev_priv(dev); 1503 unsigned long flags; 1504 int rc; 1505 1506 spin_lock_irqsave(&data->txlock, flags); 1507 rc = mii_ethtool_gset(&data->mii_if, cmd); 1508 spin_unlock_irqrestore(&data->txlock, flags); 1509 1510 return rc; 1511 } 1512 1513 static int tsi108_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) 1514 { 1515 struct tsi108_prv_data *data = netdev_priv(dev); 1516 unsigned long flags; 1517 int rc; 1518 1519 spin_lock_irqsave(&data->txlock, flags); 1520 rc = mii_ethtool_sset(&data->mii_if, cmd); 1521 spin_unlock_irqrestore(&data->txlock, flags); 1522 1523 return rc; 1524 } 1525 1526 static int tsi108_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) 1527 { 1528 struct tsi108_prv_data *data = netdev_priv(dev); 1529 if (!netif_running(dev)) 1530 return -EINVAL; 1531 return generic_mii_ioctl(&data->mii_if, if_mii(rq), cmd, NULL); 1532 } 1533 1534 static const struct ethtool_ops tsi108_ethtool_ops = { 1535 .get_link = ethtool_op_get_link, 1536 .get_settings = tsi108_get_settings, 1537 .set_settings = tsi108_set_settings, 1538 }; 1539 1540 static const struct net_device_ops tsi108_netdev_ops = { 1541 .ndo_open = tsi108_open, 1542 .ndo_stop = tsi108_close, 1543 .ndo_start_xmit = tsi108_send_packet, 1544 .ndo_set_rx_mode = tsi108_set_rx_mode, 1545 .ndo_get_stats = tsi108_get_stats, 1546 .ndo_do_ioctl = tsi108_do_ioctl, 1547 .ndo_set_mac_address = tsi108_set_mac, 1548 .ndo_validate_addr = eth_validate_addr, 1549 .ndo_change_mtu = eth_change_mtu, 1550 }; 1551 1552 static int 1553 tsi108_init_one(struct platform_device *pdev) 1554 { 1555 struct net_device *dev = NULL; 1556 struct tsi108_prv_data *data = NULL; 1557 hw_info *einfo; 1558 int err = 0; 1559 1560 einfo = dev_get_platdata(&pdev->dev); 1561 1562 if (NULL == einfo) { 1563 printk(KERN_ERR "tsi-eth %d: Missing additional data!\n", 1564 pdev->id); 1565 return -ENODEV; 1566 } 1567 1568 /* Create an ethernet device instance */ 1569 1570 dev = alloc_etherdev(sizeof(struct tsi108_prv_data)); 1571 if (!dev) 1572 return -ENOMEM; 1573 1574 printk("tsi108_eth%d: probe...\n", pdev->id); 1575 data = netdev_priv(dev); 1576 data->dev = dev; 1577 1578 pr_debug("tsi108_eth%d:regs:phyresgs:phy:irq_num=0x%x:0x%x:0x%x:0x%x\n", 1579 pdev->id, einfo->regs, einfo->phyregs, 1580 einfo->phy, einfo->irq_num); 1581 1582 data->regs = ioremap(einfo->regs, 0x400); 1583 if (NULL == data->regs) { 1584 err = -ENOMEM; 1585 goto regs_fail; 1586 } 1587 1588 data->phyregs = ioremap(einfo->phyregs, 0x400); 1589 if (NULL == data->phyregs) { 1590 err = -ENOMEM; 1591 goto phyregs_fail; 1592 } 1593 /* MII setup */ 1594 data->mii_if.dev = dev; 1595 data->mii_if.mdio_read = tsi108_mdio_read; 1596 data->mii_if.mdio_write = tsi108_mdio_write; 1597 data->mii_if.phy_id = einfo->phy; 1598 data->mii_if.phy_id_mask = 0x1f; 1599 data->mii_if.reg_num_mask = 0x1f; 1600 1601 data->phy = einfo->phy; 1602 data->phy_type = einfo->phy_type; 1603 data->irq_num = einfo->irq_num; 1604 data->id = pdev->id; 1605 netif_napi_add(dev, &data->napi, tsi108_poll, 64); 1606 dev->netdev_ops = &tsi108_netdev_ops; 1607 dev->ethtool_ops = &tsi108_ethtool_ops; 1608 1609 /* Apparently, the Linux networking code won't use scatter-gather 1610 * if the hardware doesn't do checksums. However, it's faster 1611 * to checksum in place and use SG, as (among other reasons) 1612 * the cache won't be dirtied (which then has to be flushed 1613 * before DMA). The checksumming is done by the driver (via 1614 * a new function skb_csum_dev() in net/core/skbuff.c). 1615 */ 1616 1617 dev->features = NETIF_F_HIGHDMA; 1618 1619 spin_lock_init(&data->txlock); 1620 spin_lock_init(&data->misclock); 1621 1622 tsi108_reset_ether(data); 1623 tsi108_kill_phy(dev); 1624 1625 if ((err = tsi108_get_mac(dev)) != 0) { 1626 printk(KERN_ERR "%s: Invalid MAC address. Please correct.\n", 1627 dev->name); 1628 goto register_fail; 1629 } 1630 1631 tsi108_init_mac(dev); 1632 err = register_netdev(dev); 1633 if (err) { 1634 printk(KERN_ERR "%s: Cannot register net device, aborting.\n", 1635 dev->name); 1636 goto register_fail; 1637 } 1638 1639 platform_set_drvdata(pdev, dev); 1640 printk(KERN_INFO "%s: Tsi108 Gigabit Ethernet, MAC: %pM\n", 1641 dev->name, dev->dev_addr); 1642 #ifdef DEBUG 1643 data->msg_enable = DEBUG; 1644 dump_eth_one(dev); 1645 #endif 1646 1647 return 0; 1648 1649 register_fail: 1650 iounmap(data->phyregs); 1651 1652 phyregs_fail: 1653 iounmap(data->regs); 1654 1655 regs_fail: 1656 free_netdev(dev); 1657 return err; 1658 } 1659 1660 /* There's no way to either get interrupts from the PHY when 1661 * something changes, or to have the Tsi108 automatically communicate 1662 * with the PHY to reconfigure itself. 1663 * 1664 * Thus, we have to do it using a timer. 1665 */ 1666 1667 static void tsi108_timed_checker(unsigned long dev_ptr) 1668 { 1669 struct net_device *dev = (struct net_device *)dev_ptr; 1670 struct tsi108_prv_data *data = netdev_priv(dev); 1671 1672 tsi108_check_phy(dev); 1673 tsi108_check_rxring(dev); 1674 mod_timer(&data->timer, jiffies + CHECK_PHY_INTERVAL); 1675 } 1676 1677 static int tsi108_ether_remove(struct platform_device *pdev) 1678 { 1679 struct net_device *dev = platform_get_drvdata(pdev); 1680 struct tsi108_prv_data *priv = netdev_priv(dev); 1681 1682 unregister_netdev(dev); 1683 tsi108_stop_ethernet(dev); 1684 iounmap(priv->regs); 1685 iounmap(priv->phyregs); 1686 free_netdev(dev); 1687 1688 return 0; 1689 } 1690 module_platform_driver(tsi_eth_driver); 1691 1692 MODULE_AUTHOR("Tundra Semiconductor Corporation"); 1693 MODULE_DESCRIPTION("Tsi108 Gigabit Ethernet driver"); 1694 MODULE_LICENSE("GPL"); 1695 MODULE_ALIAS("platform:tsi-ethernet"); 1696