1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * PS3 gelic network driver. 4 * 5 * Copyright (C) 2007 Sony Computer Entertainment Inc. 6 * Copyright 2006, 2007 Sony Corporation 7 * 8 * This file is based on: spider_net.c 9 * 10 * (C) Copyright IBM Corp. 2005 11 * 12 * Authors : Utz Bacher <utz.bacher@de.ibm.com> 13 * Jens Osterkamp <Jens.Osterkamp@de.ibm.com> 14 */ 15 16 #undef DEBUG 17 18 #include <linux/interrupt.h> 19 #include <linux/kernel.h> 20 #include <linux/module.h> 21 #include <linux/slab.h> 22 23 #include <linux/etherdevice.h> 24 #include <linux/ethtool.h> 25 #include <linux/if_vlan.h> 26 27 #include <linux/in.h> 28 #include <linux/ip.h> 29 #include <linux/tcp.h> 30 31 #include <linux/dma-mapping.h> 32 #include <net/checksum.h> 33 #include <asm/firmware.h> 34 #include <asm/ps3.h> 35 #include <asm/lv1call.h> 36 37 #include "ps3_gelic_net.h" 38 #include "ps3_gelic_wireless.h" 39 40 #define DRV_NAME "Gelic Network Driver" 41 #define DRV_VERSION "2.0" 42 43 MODULE_AUTHOR("SCE Inc."); 44 MODULE_DESCRIPTION("Gelic Network driver"); 45 MODULE_LICENSE("GPL"); 46 47 48 /* set irq_mask */ 49 int gelic_card_set_irq_mask(struct gelic_card *card, u64 mask) 50 { 51 int status; 52 53 status = lv1_net_set_interrupt_mask(bus_id(card), dev_id(card), 54 mask, 0); 55 if (status) 56 dev_info(ctodev(card), 57 "%s failed %d\n", __func__, status); 58 return status; 59 } 60 61 static void gelic_card_rx_irq_on(struct gelic_card *card) 62 { 63 card->irq_mask |= GELIC_CARD_RXINT; 64 gelic_card_set_irq_mask(card, card->irq_mask); 65 } 66 static void gelic_card_rx_irq_off(struct gelic_card *card) 67 { 68 card->irq_mask &= ~GELIC_CARD_RXINT; 69 gelic_card_set_irq_mask(card, card->irq_mask); 70 } 71 72 static void gelic_card_get_ether_port_status(struct gelic_card *card, 73 int inform) 74 { 75 u64 v2; 76 struct net_device *ether_netdev; 77 78 lv1_net_control(bus_id(card), dev_id(card), 79 GELIC_LV1_GET_ETH_PORT_STATUS, 80 GELIC_LV1_VLAN_TX_ETHERNET_0, 0, 0, 81 &card->ether_port_status, &v2); 82 83 if (inform) { 84 ether_netdev = card->netdev[GELIC_PORT_ETHERNET_0]; 85 if (card->ether_port_status & GELIC_LV1_ETHER_LINK_UP) 86 netif_carrier_on(ether_netdev); 87 else 88 netif_carrier_off(ether_netdev); 89 } 90 } 91 92 /** 93 * gelic_descr_get_status -- returns the status of a descriptor 94 * @descr: descriptor to look at 95 * 96 * returns the status as in the dmac_cmd_status field of the descriptor 97 */ 98 static enum gelic_descr_dma_status 99 gelic_descr_get_status(struct gelic_descr *descr) 100 { 101 return be32_to_cpu(descr->dmac_cmd_status) & GELIC_DESCR_DMA_STAT_MASK; 102 } 103 104 static int gelic_card_set_link_mode(struct gelic_card *card, int mode) 105 { 106 int status; 107 u64 v1, v2; 108 109 status = lv1_net_control(bus_id(card), dev_id(card), 110 GELIC_LV1_SET_NEGOTIATION_MODE, 111 GELIC_LV1_PHY_ETHERNET_0, mode, 0, &v1, &v2); 112 if (status) { 113 pr_info("%s: failed setting negotiation mode %d\n", __func__, 114 status); 115 return -EBUSY; 116 } 117 118 card->link_mode = mode; 119 return 0; 120 } 121 122 /** 123 * gelic_card_disable_txdmac - disables the transmit DMA controller 124 * @card: card structure 125 * 126 * gelic_card_disable_txdmac terminates processing on the DMA controller by 127 * turing off DMA and issuing a force end 128 */ 129 static void gelic_card_disable_txdmac(struct gelic_card *card) 130 { 131 int status; 132 133 /* this hvc blocks until the DMA in progress really stopped */ 134 status = lv1_net_stop_tx_dma(bus_id(card), dev_id(card)); 135 if (status) 136 dev_err(ctodev(card), 137 "lv1_net_stop_tx_dma failed, status=%d\n", status); 138 } 139 140 /** 141 * gelic_card_enable_rxdmac - enables the receive DMA controller 142 * @card: card structure 143 * 144 * gelic_card_enable_rxdmac enables the DMA controller by setting RX_DMA_EN 145 * in the GDADMACCNTR register 146 */ 147 static void gelic_card_enable_rxdmac(struct gelic_card *card) 148 { 149 int status; 150 151 #ifdef DEBUG 152 if (gelic_descr_get_status(card->rx_chain.head) != 153 GELIC_DESCR_DMA_CARDOWNED) { 154 printk(KERN_ERR "%s: status=%x\n", __func__, 155 be32_to_cpu(card->rx_chain.head->dmac_cmd_status)); 156 printk(KERN_ERR "%s: nextphy=%x\n", __func__, 157 be32_to_cpu(card->rx_chain.head->next_descr_addr)); 158 printk(KERN_ERR "%s: head=%p\n", __func__, 159 card->rx_chain.head); 160 } 161 #endif 162 status = lv1_net_start_rx_dma(bus_id(card), dev_id(card), 163 card->rx_chain.head->bus_addr, 0); 164 if (status) 165 dev_info(ctodev(card), 166 "lv1_net_start_rx_dma failed, status=%d\n", status); 167 } 168 169 /** 170 * gelic_card_disable_rxdmac - disables the receive DMA controller 171 * @card: card structure 172 * 173 * gelic_card_disable_rxdmac terminates processing on the DMA controller by 174 * turing off DMA and issuing a force end 175 */ 176 static void gelic_card_disable_rxdmac(struct gelic_card *card) 177 { 178 int status; 179 180 /* this hvc blocks until the DMA in progress really stopped */ 181 status = lv1_net_stop_rx_dma(bus_id(card), dev_id(card)); 182 if (status) 183 dev_err(ctodev(card), 184 "lv1_net_stop_rx_dma failed, %d\n", status); 185 } 186 187 /** 188 * gelic_descr_set_status -- sets the status of a descriptor 189 * @descr: descriptor to change 190 * @status: status to set in the descriptor 191 * 192 * changes the status to the specified value. Doesn't change other bits 193 * in the status 194 */ 195 static void gelic_descr_set_status(struct gelic_descr *descr, 196 enum gelic_descr_dma_status status) 197 { 198 descr->dmac_cmd_status = cpu_to_be32(status | 199 (be32_to_cpu(descr->dmac_cmd_status) & 200 ~GELIC_DESCR_DMA_STAT_MASK)); 201 /* 202 * dma_cmd_status field is used to indicate whether the descriptor 203 * is valid or not. 204 * Usually caller of this function wants to inform that to the 205 * hardware, so we assure here the hardware sees the change. 206 */ 207 wmb(); 208 } 209 210 /** 211 * gelic_card_reset_chain - reset status of a descriptor chain 212 * @card: card structure 213 * @chain: address of chain 214 * @start_descr: address of descriptor array 215 * 216 * Reset the status of dma descriptors to ready state 217 * and re-initialize the hardware chain for later use 218 */ 219 static void gelic_card_reset_chain(struct gelic_card *card, 220 struct gelic_descr_chain *chain, 221 struct gelic_descr *start_descr) 222 { 223 struct gelic_descr *descr; 224 225 for (descr = start_descr; start_descr != descr->next; descr++) { 226 gelic_descr_set_status(descr, GELIC_DESCR_DMA_CARDOWNED); 227 descr->next_descr_addr = cpu_to_be32(descr->next->bus_addr); 228 } 229 230 chain->head = start_descr; 231 chain->tail = (descr - 1); 232 233 (descr - 1)->next_descr_addr = 0; 234 } 235 236 void gelic_card_up(struct gelic_card *card) 237 { 238 pr_debug("%s: called\n", __func__); 239 mutex_lock(&card->updown_lock); 240 if (atomic_inc_return(&card->users) == 1) { 241 pr_debug("%s: real do\n", __func__); 242 /* enable irq */ 243 gelic_card_set_irq_mask(card, card->irq_mask); 244 /* start rx */ 245 gelic_card_enable_rxdmac(card); 246 247 napi_enable(&card->napi); 248 } 249 mutex_unlock(&card->updown_lock); 250 pr_debug("%s: done\n", __func__); 251 } 252 253 void gelic_card_down(struct gelic_card *card) 254 { 255 u64 mask; 256 pr_debug("%s: called\n", __func__); 257 mutex_lock(&card->updown_lock); 258 if (atomic_dec_if_positive(&card->users) == 0) { 259 pr_debug("%s: real do\n", __func__); 260 napi_disable(&card->napi); 261 /* 262 * Disable irq. Wireless interrupts will 263 * be disabled later if any 264 */ 265 mask = card->irq_mask & (GELIC_CARD_WLAN_EVENT_RECEIVED | 266 GELIC_CARD_WLAN_COMMAND_COMPLETED); 267 gelic_card_set_irq_mask(card, mask); 268 /* stop rx */ 269 gelic_card_disable_rxdmac(card); 270 gelic_card_reset_chain(card, &card->rx_chain, 271 card->descr + GELIC_NET_TX_DESCRIPTORS); 272 /* stop tx */ 273 gelic_card_disable_txdmac(card); 274 } 275 mutex_unlock(&card->updown_lock); 276 pr_debug("%s: done\n", __func__); 277 } 278 279 /** 280 * gelic_card_free_chain - free descriptor chain 281 * @card: card structure 282 * @descr_in: address of desc 283 */ 284 static void gelic_card_free_chain(struct gelic_card *card, 285 struct gelic_descr *descr_in) 286 { 287 struct gelic_descr *descr; 288 289 for (descr = descr_in; descr && descr->bus_addr; descr = descr->next) { 290 dma_unmap_single(ctodev(card), descr->bus_addr, 291 GELIC_DESCR_SIZE, DMA_BIDIRECTIONAL); 292 descr->bus_addr = 0; 293 } 294 } 295 296 /** 297 * gelic_card_init_chain - links descriptor chain 298 * @card: card structure 299 * @chain: address of chain 300 * @start_descr: address of descriptor array 301 * @no: number of descriptors 302 * 303 * we manage a circular list that mirrors the hardware structure, 304 * except that the hardware uses bus addresses. 305 * 306 * returns 0 on success, <0 on failure 307 */ 308 static int gelic_card_init_chain(struct gelic_card *card, 309 struct gelic_descr_chain *chain, 310 struct gelic_descr *start_descr, int no) 311 { 312 int i; 313 struct gelic_descr *descr; 314 315 descr = start_descr; 316 memset(descr, 0, sizeof(*descr) * no); 317 318 /* set up the hardware pointers in each descriptor */ 319 for (i = 0; i < no; i++, descr++) { 320 gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE); 321 descr->bus_addr = 322 dma_map_single(ctodev(card), descr, 323 GELIC_DESCR_SIZE, 324 DMA_BIDIRECTIONAL); 325 326 if (!descr->bus_addr) 327 goto iommu_error; 328 329 descr->next = descr + 1; 330 descr->prev = descr - 1; 331 } 332 /* make them as ring */ 333 (descr - 1)->next = start_descr; 334 start_descr->prev = (descr - 1); 335 336 /* chain bus addr of hw descriptor */ 337 descr = start_descr; 338 for (i = 0; i < no; i++, descr++) { 339 descr->next_descr_addr = cpu_to_be32(descr->next->bus_addr); 340 } 341 342 chain->head = start_descr; 343 chain->tail = start_descr; 344 345 /* do not chain last hw descriptor */ 346 (descr - 1)->next_descr_addr = 0; 347 348 return 0; 349 350 iommu_error: 351 for (i--, descr--; 0 <= i; i--, descr--) 352 if (descr->bus_addr) 353 dma_unmap_single(ctodev(card), descr->bus_addr, 354 GELIC_DESCR_SIZE, 355 DMA_BIDIRECTIONAL); 356 return -ENOMEM; 357 } 358 359 /** 360 * gelic_descr_prepare_rx - reinitializes a rx descriptor 361 * @card: card structure 362 * @descr: descriptor to re-init 363 * 364 * return 0 on success, <0 on failure 365 * 366 * allocates a new rx skb, iommu-maps it and attaches it to the descriptor. 367 * Activate the descriptor state-wise 368 */ 369 static int gelic_descr_prepare_rx(struct gelic_card *card, 370 struct gelic_descr *descr) 371 { 372 int offset; 373 unsigned int bufsize; 374 375 if (gelic_descr_get_status(descr) != GELIC_DESCR_DMA_NOT_IN_USE) 376 dev_info(ctodev(card), "%s: ERROR status\n", __func__); 377 /* we need to round up the buffer size to a multiple of 128 */ 378 bufsize = ALIGN(GELIC_NET_MAX_MTU, GELIC_NET_RXBUF_ALIGN); 379 380 /* and we need to have it 128 byte aligned, therefore we allocate a 381 * bit more */ 382 descr->skb = dev_alloc_skb(bufsize + GELIC_NET_RXBUF_ALIGN - 1); 383 if (!descr->skb) { 384 descr->buf_addr = 0; /* tell DMAC don't touch memory */ 385 return -ENOMEM; 386 } 387 descr->buf_size = cpu_to_be32(bufsize); 388 descr->dmac_cmd_status = 0; 389 descr->result_size = 0; 390 descr->valid_size = 0; 391 descr->data_error = 0; 392 393 offset = ((unsigned long)descr->skb->data) & 394 (GELIC_NET_RXBUF_ALIGN - 1); 395 if (offset) 396 skb_reserve(descr->skb, GELIC_NET_RXBUF_ALIGN - offset); 397 /* io-mmu-map the skb */ 398 descr->buf_addr = cpu_to_be32(dma_map_single(ctodev(card), 399 descr->skb->data, 400 GELIC_NET_MAX_MTU, 401 DMA_FROM_DEVICE)); 402 if (!descr->buf_addr) { 403 dev_kfree_skb_any(descr->skb); 404 descr->skb = NULL; 405 dev_info(ctodev(card), 406 "%s:Could not iommu-map rx buffer\n", __func__); 407 gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE); 408 return -ENOMEM; 409 } else { 410 gelic_descr_set_status(descr, GELIC_DESCR_DMA_CARDOWNED); 411 return 0; 412 } 413 } 414 415 /** 416 * gelic_card_release_rx_chain - free all skb of rx descr 417 * @card: card structure 418 * 419 */ 420 static void gelic_card_release_rx_chain(struct gelic_card *card) 421 { 422 struct gelic_descr *descr = card->rx_chain.head; 423 424 do { 425 if (descr->skb) { 426 dma_unmap_single(ctodev(card), 427 be32_to_cpu(descr->buf_addr), 428 descr->skb->len, 429 DMA_FROM_DEVICE); 430 descr->buf_addr = 0; 431 dev_kfree_skb_any(descr->skb); 432 descr->skb = NULL; 433 gelic_descr_set_status(descr, 434 GELIC_DESCR_DMA_NOT_IN_USE); 435 } 436 descr = descr->next; 437 } while (descr != card->rx_chain.head); 438 } 439 440 /** 441 * gelic_card_fill_rx_chain - fills descriptors/skbs in the rx chains 442 * @card: card structure 443 * 444 * fills all descriptors in the rx chain: allocates skbs 445 * and iommu-maps them. 446 * returns 0 on success, < 0 on failure 447 */ 448 static int gelic_card_fill_rx_chain(struct gelic_card *card) 449 { 450 struct gelic_descr *descr = card->rx_chain.head; 451 int ret; 452 453 do { 454 if (!descr->skb) { 455 ret = gelic_descr_prepare_rx(card, descr); 456 if (ret) 457 goto rewind; 458 } 459 descr = descr->next; 460 } while (descr != card->rx_chain.head); 461 462 return 0; 463 rewind: 464 gelic_card_release_rx_chain(card); 465 return ret; 466 } 467 468 /** 469 * gelic_card_alloc_rx_skbs - allocates rx skbs in rx descriptor chains 470 * @card: card structure 471 * 472 * returns 0 on success, < 0 on failure 473 */ 474 static int gelic_card_alloc_rx_skbs(struct gelic_card *card) 475 { 476 struct gelic_descr_chain *chain; 477 int ret; 478 chain = &card->rx_chain; 479 ret = gelic_card_fill_rx_chain(card); 480 chain->tail = card->rx_top->prev; /* point to the last */ 481 return ret; 482 } 483 484 /** 485 * gelic_descr_release_tx - processes a used tx descriptor 486 * @card: card structure 487 * @descr: descriptor to release 488 * 489 * releases a used tx descriptor (unmapping, freeing of skb) 490 */ 491 static void gelic_descr_release_tx(struct gelic_card *card, 492 struct gelic_descr *descr) 493 { 494 struct sk_buff *skb = descr->skb; 495 496 BUG_ON(!(be32_to_cpu(descr->data_status) & GELIC_DESCR_TX_TAIL)); 497 498 dma_unmap_single(ctodev(card), be32_to_cpu(descr->buf_addr), skb->len, 499 DMA_TO_DEVICE); 500 dev_kfree_skb_any(skb); 501 502 descr->buf_addr = 0; 503 descr->buf_size = 0; 504 descr->next_descr_addr = 0; 505 descr->result_size = 0; 506 descr->valid_size = 0; 507 descr->data_status = 0; 508 descr->data_error = 0; 509 descr->skb = NULL; 510 511 /* set descr status */ 512 gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE); 513 } 514 515 static void gelic_card_stop_queues(struct gelic_card *card) 516 { 517 netif_stop_queue(card->netdev[GELIC_PORT_ETHERNET_0]); 518 519 if (card->netdev[GELIC_PORT_WIRELESS]) 520 netif_stop_queue(card->netdev[GELIC_PORT_WIRELESS]); 521 } 522 static void gelic_card_wake_queues(struct gelic_card *card) 523 { 524 netif_wake_queue(card->netdev[GELIC_PORT_ETHERNET_0]); 525 526 if (card->netdev[GELIC_PORT_WIRELESS]) 527 netif_wake_queue(card->netdev[GELIC_PORT_WIRELESS]); 528 } 529 /** 530 * gelic_card_release_tx_chain - processes sent tx descriptors 531 * @card: adapter structure 532 * @stop: net_stop sequence 533 * 534 * releases the tx descriptors that gelic has finished with 535 */ 536 static void gelic_card_release_tx_chain(struct gelic_card *card, int stop) 537 { 538 struct gelic_descr_chain *tx_chain; 539 enum gelic_descr_dma_status status; 540 struct net_device *netdev; 541 int release = 0; 542 543 for (tx_chain = &card->tx_chain; 544 tx_chain->head != tx_chain->tail && tx_chain->tail; 545 tx_chain->tail = tx_chain->tail->next) { 546 status = gelic_descr_get_status(tx_chain->tail); 547 netdev = tx_chain->tail->skb->dev; 548 switch (status) { 549 case GELIC_DESCR_DMA_RESPONSE_ERROR: 550 case GELIC_DESCR_DMA_PROTECTION_ERROR: 551 case GELIC_DESCR_DMA_FORCE_END: 552 if (printk_ratelimit()) 553 dev_info(ctodev(card), 554 "%s: forcing end of tx descriptor " \ 555 "with status %x\n", 556 __func__, status); 557 netdev->stats.tx_dropped++; 558 break; 559 560 case GELIC_DESCR_DMA_COMPLETE: 561 if (tx_chain->tail->skb) { 562 netdev->stats.tx_packets++; 563 netdev->stats.tx_bytes += 564 tx_chain->tail->skb->len; 565 } 566 break; 567 568 case GELIC_DESCR_DMA_CARDOWNED: 569 /* pending tx request */ 570 default: 571 /* any other value (== GELIC_DESCR_DMA_NOT_IN_USE) */ 572 if (!stop) 573 goto out; 574 } 575 gelic_descr_release_tx(card, tx_chain->tail); 576 release ++; 577 } 578 out: 579 if (!stop && release) 580 gelic_card_wake_queues(card); 581 } 582 583 /** 584 * gelic_net_set_multi - sets multicast addresses and promisc flags 585 * @netdev: interface device structure 586 * 587 * gelic_net_set_multi configures multicast addresses as needed for the 588 * netdev interface. It also sets up multicast, allmulti and promisc 589 * flags appropriately 590 */ 591 void gelic_net_set_multi(struct net_device *netdev) 592 { 593 struct gelic_card *card = netdev_card(netdev); 594 struct netdev_hw_addr *ha; 595 unsigned int i; 596 uint8_t *p; 597 u64 addr; 598 int status; 599 600 /* clear all multicast address */ 601 status = lv1_net_remove_multicast_address(bus_id(card), dev_id(card), 602 0, 1); 603 if (status) 604 dev_err(ctodev(card), 605 "lv1_net_remove_multicast_address failed %d\n", 606 status); 607 /* set broadcast address */ 608 status = lv1_net_add_multicast_address(bus_id(card), dev_id(card), 609 GELIC_NET_BROADCAST_ADDR, 0); 610 if (status) 611 dev_err(ctodev(card), 612 "lv1_net_add_multicast_address failed, %d\n", 613 status); 614 615 if ((netdev->flags & IFF_ALLMULTI) || 616 (netdev_mc_count(netdev) > GELIC_NET_MC_COUNT_MAX)) { 617 status = lv1_net_add_multicast_address(bus_id(card), 618 dev_id(card), 619 0, 1); 620 if (status) 621 dev_err(ctodev(card), 622 "lv1_net_add_multicast_address failed, %d\n", 623 status); 624 return; 625 } 626 627 /* set multicast addresses */ 628 netdev_for_each_mc_addr(ha, netdev) { 629 addr = 0; 630 p = ha->addr; 631 for (i = 0; i < ETH_ALEN; i++) { 632 addr <<= 8; 633 addr |= *p++; 634 } 635 status = lv1_net_add_multicast_address(bus_id(card), 636 dev_id(card), 637 addr, 0); 638 if (status) 639 dev_err(ctodev(card), 640 "lv1_net_add_multicast_address failed, %d\n", 641 status); 642 } 643 } 644 645 /** 646 * gelic_net_stop - called upon ifconfig down 647 * @netdev: interface device structure 648 * 649 * always returns 0 650 */ 651 int gelic_net_stop(struct net_device *netdev) 652 { 653 struct gelic_card *card; 654 655 pr_debug("%s: start\n", __func__); 656 657 netif_stop_queue(netdev); 658 netif_carrier_off(netdev); 659 660 card = netdev_card(netdev); 661 gelic_card_down(card); 662 663 pr_debug("%s: done\n", __func__); 664 return 0; 665 } 666 667 /** 668 * gelic_card_get_next_tx_descr - returns the next available tx descriptor 669 * @card: device structure to get descriptor from 670 * 671 * returns the address of the next descriptor, or NULL if not available. 672 */ 673 static struct gelic_descr * 674 gelic_card_get_next_tx_descr(struct gelic_card *card) 675 { 676 if (!card->tx_chain.head) 677 return NULL; 678 /* see if the next descriptor is free */ 679 if (card->tx_chain.tail != card->tx_chain.head->next && 680 gelic_descr_get_status(card->tx_chain.head) == 681 GELIC_DESCR_DMA_NOT_IN_USE) 682 return card->tx_chain.head; 683 else 684 return NULL; 685 686 } 687 688 /** 689 * gelic_net_set_txdescr_cmdstat - sets the tx descriptor command field 690 * @descr: descriptor structure to fill out 691 * @skb: packet to consider 692 * 693 * fills out the command and status field of the descriptor structure, 694 * depending on hardware checksum settings. This function assumes a wmb() 695 * has executed before. 696 */ 697 static void gelic_descr_set_tx_cmdstat(struct gelic_descr *descr, 698 struct sk_buff *skb) 699 { 700 if (skb->ip_summed != CHECKSUM_PARTIAL) 701 descr->dmac_cmd_status = 702 cpu_to_be32(GELIC_DESCR_DMA_CMD_NO_CHKSUM | 703 GELIC_DESCR_TX_DMA_FRAME_TAIL); 704 else { 705 /* is packet ip? 706 * if yes: tcp? udp? */ 707 if (skb->protocol == htons(ETH_P_IP)) { 708 if (ip_hdr(skb)->protocol == IPPROTO_TCP) 709 descr->dmac_cmd_status = 710 cpu_to_be32(GELIC_DESCR_DMA_CMD_TCP_CHKSUM | 711 GELIC_DESCR_TX_DMA_FRAME_TAIL); 712 713 else if (ip_hdr(skb)->protocol == IPPROTO_UDP) 714 descr->dmac_cmd_status = 715 cpu_to_be32(GELIC_DESCR_DMA_CMD_UDP_CHKSUM | 716 GELIC_DESCR_TX_DMA_FRAME_TAIL); 717 else /* 718 * the stack should checksum non-tcp and non-udp 719 * packets on his own: NETIF_F_IP_CSUM 720 */ 721 descr->dmac_cmd_status = 722 cpu_to_be32(GELIC_DESCR_DMA_CMD_NO_CHKSUM | 723 GELIC_DESCR_TX_DMA_FRAME_TAIL); 724 } 725 } 726 } 727 728 static struct sk_buff *gelic_put_vlan_tag(struct sk_buff *skb, 729 unsigned short tag) 730 { 731 struct vlan_ethhdr *veth; 732 static unsigned int c; 733 734 if (skb_headroom(skb) < VLAN_HLEN) { 735 struct sk_buff *sk_tmp = skb; 736 pr_debug("%s: hd=%d c=%ud\n", __func__, skb_headroom(skb), c); 737 skb = skb_realloc_headroom(sk_tmp, VLAN_HLEN); 738 if (!skb) 739 return NULL; 740 dev_kfree_skb_any(sk_tmp); 741 } 742 veth = skb_push(skb, VLAN_HLEN); 743 744 /* Move the mac addresses to the top of buffer */ 745 memmove(skb->data, skb->data + VLAN_HLEN, 2 * ETH_ALEN); 746 747 veth->h_vlan_proto = cpu_to_be16(ETH_P_8021Q); 748 veth->h_vlan_TCI = htons(tag); 749 750 return skb; 751 } 752 753 /** 754 * gelic_descr_prepare_tx - setup a descriptor for sending packets 755 * @card: card structure 756 * @descr: descriptor structure 757 * @skb: packet to use 758 * 759 * returns 0 on success, <0 on failure. 760 * 761 */ 762 static int gelic_descr_prepare_tx(struct gelic_card *card, 763 struct gelic_descr *descr, 764 struct sk_buff *skb) 765 { 766 dma_addr_t buf; 767 768 if (card->vlan_required) { 769 struct sk_buff *skb_tmp; 770 enum gelic_port_type type; 771 772 type = netdev_port(skb->dev)->type; 773 skb_tmp = gelic_put_vlan_tag(skb, 774 card->vlan[type].tx); 775 if (!skb_tmp) 776 return -ENOMEM; 777 skb = skb_tmp; 778 } 779 780 buf = dma_map_single(ctodev(card), skb->data, skb->len, DMA_TO_DEVICE); 781 782 if (!buf) { 783 dev_err(ctodev(card), 784 "dma map 2 failed (%p, %i). Dropping packet\n", 785 skb->data, skb->len); 786 return -ENOMEM; 787 } 788 789 descr->buf_addr = cpu_to_be32(buf); 790 descr->buf_size = cpu_to_be32(skb->len); 791 descr->skb = skb; 792 descr->data_status = 0; 793 descr->next_descr_addr = 0; /* terminate hw descr */ 794 gelic_descr_set_tx_cmdstat(descr, skb); 795 796 /* bump free descriptor pointer */ 797 card->tx_chain.head = descr->next; 798 return 0; 799 } 800 801 /** 802 * gelic_card_kick_txdma - enables TX DMA processing 803 * @card: card structure 804 * @descr: descriptor address to enable TX processing at 805 * 806 */ 807 static int gelic_card_kick_txdma(struct gelic_card *card, 808 struct gelic_descr *descr) 809 { 810 int status = 0; 811 812 if (card->tx_dma_progress) 813 return 0; 814 815 if (gelic_descr_get_status(descr) == GELIC_DESCR_DMA_CARDOWNED) { 816 card->tx_dma_progress = 1; 817 status = lv1_net_start_tx_dma(bus_id(card), dev_id(card), 818 descr->bus_addr, 0); 819 if (status) { 820 card->tx_dma_progress = 0; 821 dev_info(ctodev(card), "lv1_net_start_txdma failed," \ 822 "status=%d\n", status); 823 } 824 } 825 return status; 826 } 827 828 /** 829 * gelic_net_xmit - transmits a frame over the device 830 * @skb: packet to send out 831 * @netdev: interface device structure 832 * 833 * returns NETDEV_TX_OK on success, NETDEV_TX_BUSY on failure 834 */ 835 netdev_tx_t gelic_net_xmit(struct sk_buff *skb, struct net_device *netdev) 836 { 837 struct gelic_card *card = netdev_card(netdev); 838 struct gelic_descr *descr; 839 int result; 840 unsigned long flags; 841 842 spin_lock_irqsave(&card->tx_lock, flags); 843 844 gelic_card_release_tx_chain(card, 0); 845 846 descr = gelic_card_get_next_tx_descr(card); 847 if (!descr) { 848 /* 849 * no more descriptors free 850 */ 851 gelic_card_stop_queues(card); 852 spin_unlock_irqrestore(&card->tx_lock, flags); 853 return NETDEV_TX_BUSY; 854 } 855 856 result = gelic_descr_prepare_tx(card, descr, skb); 857 if (result) { 858 /* 859 * DMA map failed. As chances are that failure 860 * would continue, just release skb and return 861 */ 862 netdev->stats.tx_dropped++; 863 dev_kfree_skb_any(skb); 864 spin_unlock_irqrestore(&card->tx_lock, flags); 865 return NETDEV_TX_OK; 866 } 867 /* 868 * link this prepared descriptor to previous one 869 * to achieve high performance 870 */ 871 descr->prev->next_descr_addr = cpu_to_be32(descr->bus_addr); 872 /* 873 * as hardware descriptor is modified in the above lines, 874 * ensure that the hardware sees it 875 */ 876 wmb(); 877 if (gelic_card_kick_txdma(card, descr)) { 878 /* 879 * kick failed. 880 * release descriptor which was just prepared 881 */ 882 netdev->stats.tx_dropped++; 883 /* don't trigger BUG_ON() in gelic_descr_release_tx */ 884 descr->data_status = cpu_to_be32(GELIC_DESCR_TX_TAIL); 885 gelic_descr_release_tx(card, descr); 886 /* reset head */ 887 card->tx_chain.head = descr; 888 /* reset hw termination */ 889 descr->prev->next_descr_addr = 0; 890 dev_info(ctodev(card), "%s: kick failure\n", __func__); 891 } 892 893 spin_unlock_irqrestore(&card->tx_lock, flags); 894 return NETDEV_TX_OK; 895 } 896 897 /** 898 * gelic_net_pass_skb_up - takes an skb from a descriptor and passes it on 899 * @descr: descriptor to process 900 * @card: card structure 901 * @netdev: net_device structure to be passed packet 902 * 903 * iommu-unmaps the skb, fills out skb structure and passes the data to the 904 * stack. The descriptor state is not changed. 905 */ 906 static void gelic_net_pass_skb_up(struct gelic_descr *descr, 907 struct gelic_card *card, 908 struct net_device *netdev) 909 910 { 911 struct sk_buff *skb = descr->skb; 912 u32 data_status, data_error; 913 914 data_status = be32_to_cpu(descr->data_status); 915 data_error = be32_to_cpu(descr->data_error); 916 /* unmap skb buffer */ 917 dma_unmap_single(ctodev(card), be32_to_cpu(descr->buf_addr), 918 GELIC_NET_MAX_MTU, 919 DMA_FROM_DEVICE); 920 921 skb_put(skb, be32_to_cpu(descr->valid_size)? 922 be32_to_cpu(descr->valid_size) : 923 be32_to_cpu(descr->result_size)); 924 if (!descr->valid_size) 925 dev_info(ctodev(card), "buffer full %x %x %x\n", 926 be32_to_cpu(descr->result_size), 927 be32_to_cpu(descr->buf_size), 928 be32_to_cpu(descr->dmac_cmd_status)); 929 930 descr->skb = NULL; 931 /* 932 * the card put 2 bytes vlan tag in front 933 * of the ethernet frame 934 */ 935 skb_pull(skb, 2); 936 skb->protocol = eth_type_trans(skb, netdev); 937 938 /* checksum offload */ 939 if (netdev->features & NETIF_F_RXCSUM) { 940 if ((data_status & GELIC_DESCR_DATA_STATUS_CHK_MASK) && 941 (!(data_error & GELIC_DESCR_DATA_ERROR_CHK_MASK))) 942 skb->ip_summed = CHECKSUM_UNNECESSARY; 943 else 944 skb_checksum_none_assert(skb); 945 } else 946 skb_checksum_none_assert(skb); 947 948 /* update netdevice statistics */ 949 netdev->stats.rx_packets++; 950 netdev->stats.rx_bytes += skb->len; 951 952 /* pass skb up to stack */ 953 netif_receive_skb(skb); 954 } 955 956 /** 957 * gelic_card_decode_one_descr - processes an rx descriptor 958 * @card: card structure 959 * 960 * returns 1 if a packet has been sent to the stack, otherwise 0 961 * 962 * processes an rx descriptor by iommu-unmapping the data buffer and passing 963 * the packet up to the stack 964 */ 965 static int gelic_card_decode_one_descr(struct gelic_card *card) 966 { 967 enum gelic_descr_dma_status status; 968 struct gelic_descr_chain *chain = &card->rx_chain; 969 struct gelic_descr *descr = chain->head; 970 struct net_device *netdev = NULL; 971 int dmac_chain_ended; 972 973 status = gelic_descr_get_status(descr); 974 975 if (status == GELIC_DESCR_DMA_CARDOWNED) 976 return 0; 977 978 if (status == GELIC_DESCR_DMA_NOT_IN_USE) { 979 dev_dbg(ctodev(card), "dormant descr? %p\n", descr); 980 return 0; 981 } 982 983 /* netdevice select */ 984 if (card->vlan_required) { 985 unsigned int i; 986 u16 vid; 987 vid = *(u16 *)(descr->skb->data) & VLAN_VID_MASK; 988 for (i = 0; i < GELIC_PORT_MAX; i++) { 989 if (card->vlan[i].rx == vid) { 990 netdev = card->netdev[i]; 991 break; 992 } 993 } 994 if (GELIC_PORT_MAX <= i) { 995 pr_info("%s: unknown packet vid=%x\n", __func__, vid); 996 goto refill; 997 } 998 } else 999 netdev = card->netdev[GELIC_PORT_ETHERNET_0]; 1000 1001 if ((status == GELIC_DESCR_DMA_RESPONSE_ERROR) || 1002 (status == GELIC_DESCR_DMA_PROTECTION_ERROR) || 1003 (status == GELIC_DESCR_DMA_FORCE_END)) { 1004 dev_info(ctodev(card), "dropping RX descriptor with state %x\n", 1005 status); 1006 netdev->stats.rx_dropped++; 1007 goto refill; 1008 } 1009 1010 if (status == GELIC_DESCR_DMA_BUFFER_FULL) { 1011 /* 1012 * Buffer full would occur if and only if 1013 * the frame length was longer than the size of this 1014 * descriptor's buffer. If the frame length was equal 1015 * to or shorter than buffer'size, FRAME_END condition 1016 * would occur. 1017 * Anyway this frame was longer than the MTU, 1018 * just drop it. 1019 */ 1020 dev_info(ctodev(card), "overlength frame\n"); 1021 goto refill; 1022 } 1023 /* 1024 * descriptors any other than FRAME_END here should 1025 * be treated as error. 1026 */ 1027 if (status != GELIC_DESCR_DMA_FRAME_END) { 1028 dev_dbg(ctodev(card), "RX descriptor with state %x\n", 1029 status); 1030 goto refill; 1031 } 1032 1033 /* ok, we've got a packet in descr */ 1034 gelic_net_pass_skb_up(descr, card, netdev); 1035 refill: 1036 1037 /* is the current descriptor terminated with next_descr == NULL? */ 1038 dmac_chain_ended = 1039 be32_to_cpu(descr->dmac_cmd_status) & 1040 GELIC_DESCR_RX_DMA_CHAIN_END; 1041 /* 1042 * So that always DMAC can see the end 1043 * of the descriptor chain to avoid 1044 * from unwanted DMAC overrun. 1045 */ 1046 descr->next_descr_addr = 0; 1047 1048 /* change the descriptor state: */ 1049 gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE); 1050 1051 /* 1052 * this call can fail, but for now, just leave this 1053 * descriptor without skb 1054 */ 1055 gelic_descr_prepare_rx(card, descr); 1056 1057 chain->tail = descr; 1058 chain->head = descr->next; 1059 1060 /* 1061 * Set this descriptor the end of the chain. 1062 */ 1063 descr->prev->next_descr_addr = cpu_to_be32(descr->bus_addr); 1064 1065 /* 1066 * If dmac chain was met, DMAC stopped. 1067 * thus re-enable it 1068 */ 1069 1070 if (dmac_chain_ended) 1071 gelic_card_enable_rxdmac(card); 1072 1073 return 1; 1074 } 1075 1076 /** 1077 * gelic_net_poll - NAPI poll function called by the stack to return packets 1078 * @napi: napi structure 1079 * @budget: number of packets we can pass to the stack at most 1080 * 1081 * returns the number of the processed packets 1082 * 1083 */ 1084 static int gelic_net_poll(struct napi_struct *napi, int budget) 1085 { 1086 struct gelic_card *card = container_of(napi, struct gelic_card, napi); 1087 int packets_done = 0; 1088 1089 while (packets_done < budget) { 1090 if (!gelic_card_decode_one_descr(card)) 1091 break; 1092 1093 packets_done++; 1094 } 1095 1096 if (packets_done < budget) { 1097 napi_complete_done(napi, packets_done); 1098 gelic_card_rx_irq_on(card); 1099 } 1100 return packets_done; 1101 } 1102 1103 /* 1104 * gelic_card_interrupt - event handler for gelic_net 1105 */ 1106 static irqreturn_t gelic_card_interrupt(int irq, void *ptr) 1107 { 1108 unsigned long flags; 1109 struct gelic_card *card = ptr; 1110 u64 status; 1111 1112 status = card->irq_status; 1113 1114 if (!status) 1115 return IRQ_NONE; 1116 1117 status &= card->irq_mask; 1118 1119 if (status & GELIC_CARD_RXINT) { 1120 gelic_card_rx_irq_off(card); 1121 napi_schedule(&card->napi); 1122 } 1123 1124 if (status & GELIC_CARD_TXINT) { 1125 spin_lock_irqsave(&card->tx_lock, flags); 1126 card->tx_dma_progress = 0; 1127 gelic_card_release_tx_chain(card, 0); 1128 /* kick outstanding tx descriptor if any */ 1129 gelic_card_kick_txdma(card, card->tx_chain.tail); 1130 spin_unlock_irqrestore(&card->tx_lock, flags); 1131 } 1132 1133 /* ether port status changed */ 1134 if (status & GELIC_CARD_PORT_STATUS_CHANGED) 1135 gelic_card_get_ether_port_status(card, 1); 1136 1137 #ifdef CONFIG_GELIC_WIRELESS 1138 if (status & (GELIC_CARD_WLAN_EVENT_RECEIVED | 1139 GELIC_CARD_WLAN_COMMAND_COMPLETED)) 1140 gelic_wl_interrupt(card->netdev[GELIC_PORT_WIRELESS], status); 1141 #endif 1142 1143 return IRQ_HANDLED; 1144 } 1145 1146 #ifdef CONFIG_NET_POLL_CONTROLLER 1147 /** 1148 * gelic_net_poll_controller - artificial interrupt for netconsole etc. 1149 * @netdev: interface device structure 1150 * 1151 * see Documentation/networking/netconsole.rst 1152 */ 1153 void gelic_net_poll_controller(struct net_device *netdev) 1154 { 1155 struct gelic_card *card = netdev_card(netdev); 1156 1157 gelic_card_set_irq_mask(card, 0); 1158 gelic_card_interrupt(netdev->irq, netdev); 1159 gelic_card_set_irq_mask(card, card->irq_mask); 1160 } 1161 #endif /* CONFIG_NET_POLL_CONTROLLER */ 1162 1163 /** 1164 * gelic_net_open - called upon ifconfig up 1165 * @netdev: interface device structure 1166 * 1167 * returns 0 on success, <0 on failure 1168 * 1169 * gelic_net_open allocates all the descriptors and memory needed for 1170 * operation, sets up multicast list and enables interrupts 1171 */ 1172 int gelic_net_open(struct net_device *netdev) 1173 { 1174 struct gelic_card *card = netdev_card(netdev); 1175 1176 dev_dbg(ctodev(card), " -> %s %p\n", __func__, netdev); 1177 1178 gelic_card_up(card); 1179 1180 netif_start_queue(netdev); 1181 gelic_card_get_ether_port_status(card, 1); 1182 1183 dev_dbg(ctodev(card), " <- %s\n", __func__); 1184 return 0; 1185 } 1186 1187 void gelic_net_get_drvinfo(struct net_device *netdev, 1188 struct ethtool_drvinfo *info) 1189 { 1190 strscpy(info->driver, DRV_NAME, sizeof(info->driver)); 1191 strscpy(info->version, DRV_VERSION, sizeof(info->version)); 1192 } 1193 1194 static int gelic_ether_get_link_ksettings(struct net_device *netdev, 1195 struct ethtool_link_ksettings *cmd) 1196 { 1197 struct gelic_card *card = netdev_card(netdev); 1198 u32 supported, advertising; 1199 1200 gelic_card_get_ether_port_status(card, 0); 1201 1202 if (card->ether_port_status & GELIC_LV1_ETHER_FULL_DUPLEX) 1203 cmd->base.duplex = DUPLEX_FULL; 1204 else 1205 cmd->base.duplex = DUPLEX_HALF; 1206 1207 switch (card->ether_port_status & GELIC_LV1_ETHER_SPEED_MASK) { 1208 case GELIC_LV1_ETHER_SPEED_10: 1209 cmd->base.speed = SPEED_10; 1210 break; 1211 case GELIC_LV1_ETHER_SPEED_100: 1212 cmd->base.speed = SPEED_100; 1213 break; 1214 case GELIC_LV1_ETHER_SPEED_1000: 1215 cmd->base.speed = SPEED_1000; 1216 break; 1217 default: 1218 pr_info("%s: speed unknown\n", __func__); 1219 cmd->base.speed = SPEED_10; 1220 break; 1221 } 1222 1223 supported = SUPPORTED_TP | SUPPORTED_Autoneg | 1224 SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | 1225 SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | 1226 SUPPORTED_1000baseT_Full; 1227 advertising = supported; 1228 if (card->link_mode & GELIC_LV1_ETHER_AUTO_NEG) { 1229 cmd->base.autoneg = AUTONEG_ENABLE; 1230 } else { 1231 cmd->base.autoneg = AUTONEG_DISABLE; 1232 advertising &= ~ADVERTISED_Autoneg; 1233 } 1234 cmd->base.port = PORT_TP; 1235 1236 ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported, 1237 supported); 1238 ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising, 1239 advertising); 1240 1241 return 0; 1242 } 1243 1244 static int 1245 gelic_ether_set_link_ksettings(struct net_device *netdev, 1246 const struct ethtool_link_ksettings *cmd) 1247 { 1248 struct gelic_card *card = netdev_card(netdev); 1249 u64 mode; 1250 int ret; 1251 1252 if (cmd->base.autoneg == AUTONEG_ENABLE) { 1253 mode = GELIC_LV1_ETHER_AUTO_NEG; 1254 } else { 1255 switch (cmd->base.speed) { 1256 case SPEED_10: 1257 mode = GELIC_LV1_ETHER_SPEED_10; 1258 break; 1259 case SPEED_100: 1260 mode = GELIC_LV1_ETHER_SPEED_100; 1261 break; 1262 case SPEED_1000: 1263 mode = GELIC_LV1_ETHER_SPEED_1000; 1264 break; 1265 default: 1266 return -EINVAL; 1267 } 1268 if (cmd->base.duplex == DUPLEX_FULL) { 1269 mode |= GELIC_LV1_ETHER_FULL_DUPLEX; 1270 } else if (cmd->base.speed == SPEED_1000) { 1271 pr_info("1000 half duplex is not supported.\n"); 1272 return -EINVAL; 1273 } 1274 } 1275 1276 ret = gelic_card_set_link_mode(card, mode); 1277 1278 if (ret) 1279 return ret; 1280 1281 return 0; 1282 } 1283 1284 static void gelic_net_get_wol(struct net_device *netdev, 1285 struct ethtool_wolinfo *wol) 1286 { 1287 if (0 <= ps3_compare_firmware_version(2, 2, 0)) 1288 wol->supported = WAKE_MAGIC; 1289 else 1290 wol->supported = 0; 1291 1292 wol->wolopts = ps3_sys_manager_get_wol() ? wol->supported : 0; 1293 memset(&wol->sopass, 0, sizeof(wol->sopass)); 1294 } 1295 static int gelic_net_set_wol(struct net_device *netdev, 1296 struct ethtool_wolinfo *wol) 1297 { 1298 int status; 1299 struct gelic_card *card; 1300 u64 v1, v2; 1301 1302 if (ps3_compare_firmware_version(2, 2, 0) < 0 || 1303 !capable(CAP_NET_ADMIN)) 1304 return -EPERM; 1305 1306 if (wol->wolopts & ~WAKE_MAGIC) 1307 return -EINVAL; 1308 1309 card = netdev_card(netdev); 1310 if (wol->wolopts & WAKE_MAGIC) { 1311 status = lv1_net_control(bus_id(card), dev_id(card), 1312 GELIC_LV1_SET_WOL, 1313 GELIC_LV1_WOL_MAGIC_PACKET, 1314 0, GELIC_LV1_WOL_MP_ENABLE, 1315 &v1, &v2); 1316 if (status) { 1317 pr_info("%s: enabling WOL failed %d\n", __func__, 1318 status); 1319 status = -EIO; 1320 goto done; 1321 } 1322 status = lv1_net_control(bus_id(card), dev_id(card), 1323 GELIC_LV1_SET_WOL, 1324 GELIC_LV1_WOL_ADD_MATCH_ADDR, 1325 0, GELIC_LV1_WOL_MATCH_ALL, 1326 &v1, &v2); 1327 if (!status) 1328 ps3_sys_manager_set_wol(1); 1329 else { 1330 pr_info("%s: enabling WOL filter failed %d\n", 1331 __func__, status); 1332 status = -EIO; 1333 } 1334 } else { 1335 status = lv1_net_control(bus_id(card), dev_id(card), 1336 GELIC_LV1_SET_WOL, 1337 GELIC_LV1_WOL_MAGIC_PACKET, 1338 0, GELIC_LV1_WOL_MP_DISABLE, 1339 &v1, &v2); 1340 if (status) { 1341 pr_info("%s: disabling WOL failed %d\n", __func__, 1342 status); 1343 status = -EIO; 1344 goto done; 1345 } 1346 status = lv1_net_control(bus_id(card), dev_id(card), 1347 GELIC_LV1_SET_WOL, 1348 GELIC_LV1_WOL_DELETE_MATCH_ADDR, 1349 0, GELIC_LV1_WOL_MATCH_ALL, 1350 &v1, &v2); 1351 if (!status) 1352 ps3_sys_manager_set_wol(0); 1353 else { 1354 pr_info("%s: removing WOL filter failed %d\n", 1355 __func__, status); 1356 status = -EIO; 1357 } 1358 } 1359 done: 1360 return status; 1361 } 1362 1363 static const struct ethtool_ops gelic_ether_ethtool_ops = { 1364 .get_drvinfo = gelic_net_get_drvinfo, 1365 .get_link = ethtool_op_get_link, 1366 .get_wol = gelic_net_get_wol, 1367 .set_wol = gelic_net_set_wol, 1368 .get_link_ksettings = gelic_ether_get_link_ksettings, 1369 .set_link_ksettings = gelic_ether_set_link_ksettings, 1370 }; 1371 1372 /** 1373 * gelic_net_tx_timeout_task - task scheduled by the watchdog timeout 1374 * function (to be called not under interrupt status) 1375 * @work: work is context of tx timout task 1376 * 1377 * called as task when tx hangs, resets interface (if interface is up) 1378 */ 1379 static void gelic_net_tx_timeout_task(struct work_struct *work) 1380 { 1381 struct gelic_card *card = 1382 container_of(work, struct gelic_card, tx_timeout_task); 1383 struct net_device *netdev = card->netdev[GELIC_PORT_ETHERNET_0]; 1384 1385 dev_info(ctodev(card), "%s:Timed out. Restarting...\n", __func__); 1386 1387 if (!(netdev->flags & IFF_UP)) 1388 goto out; 1389 1390 netif_device_detach(netdev); 1391 gelic_net_stop(netdev); 1392 1393 gelic_net_open(netdev); 1394 netif_device_attach(netdev); 1395 1396 out: 1397 atomic_dec(&card->tx_timeout_task_counter); 1398 } 1399 1400 /** 1401 * gelic_net_tx_timeout - called when the tx timeout watchdog kicks in. 1402 * @netdev: interface device structure 1403 * @txqueue: unused 1404 * 1405 * called, if tx hangs. Schedules a task that resets the interface 1406 */ 1407 void gelic_net_tx_timeout(struct net_device *netdev, unsigned int txqueue) 1408 { 1409 struct gelic_card *card; 1410 1411 card = netdev_card(netdev); 1412 atomic_inc(&card->tx_timeout_task_counter); 1413 if (netdev->flags & IFF_UP) 1414 schedule_work(&card->tx_timeout_task); 1415 else 1416 atomic_dec(&card->tx_timeout_task_counter); 1417 } 1418 1419 static const struct net_device_ops gelic_netdevice_ops = { 1420 .ndo_open = gelic_net_open, 1421 .ndo_stop = gelic_net_stop, 1422 .ndo_start_xmit = gelic_net_xmit, 1423 .ndo_set_rx_mode = gelic_net_set_multi, 1424 .ndo_tx_timeout = gelic_net_tx_timeout, 1425 .ndo_set_mac_address = eth_mac_addr, 1426 .ndo_validate_addr = eth_validate_addr, 1427 #ifdef CONFIG_NET_POLL_CONTROLLER 1428 .ndo_poll_controller = gelic_net_poll_controller, 1429 #endif 1430 }; 1431 1432 /** 1433 * gelic_ether_setup_netdev_ops - initialization of net_device operations 1434 * @netdev: net_device structure 1435 * @napi: napi structure 1436 * 1437 * fills out function pointers in the net_device structure 1438 */ 1439 static void gelic_ether_setup_netdev_ops(struct net_device *netdev, 1440 struct napi_struct *napi) 1441 { 1442 netdev->watchdog_timeo = GELIC_NET_WATCHDOG_TIMEOUT; 1443 /* NAPI */ 1444 netif_napi_add(netdev, napi, gelic_net_poll); 1445 netdev->ethtool_ops = &gelic_ether_ethtool_ops; 1446 netdev->netdev_ops = &gelic_netdevice_ops; 1447 } 1448 1449 /** 1450 * gelic_ether_setup_netdev - initialization of net_device 1451 * @netdev: net_device structure 1452 * @card: card structure 1453 * 1454 * Returns 0 on success or <0 on failure 1455 * 1456 * gelic_ether_setup_netdev initializes the net_device structure 1457 * and register it. 1458 **/ 1459 int gelic_net_setup_netdev(struct net_device *netdev, struct gelic_card *card) 1460 { 1461 int status; 1462 u64 v1, v2; 1463 1464 netdev->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM; 1465 1466 netdev->features = NETIF_F_IP_CSUM; 1467 if (GELIC_CARD_RX_CSUM_DEFAULT) 1468 netdev->features |= NETIF_F_RXCSUM; 1469 1470 status = lv1_net_control(bus_id(card), dev_id(card), 1471 GELIC_LV1_GET_MAC_ADDRESS, 1472 0, 0, 0, &v1, &v2); 1473 v1 <<= 16; 1474 if (status || !is_valid_ether_addr((u8 *)&v1)) { 1475 dev_info(ctodev(card), 1476 "%s:lv1_net_control GET_MAC_ADDR failed %d\n", 1477 __func__, status); 1478 return -EINVAL; 1479 } 1480 eth_hw_addr_set(netdev, (u8 *)&v1); 1481 1482 if (card->vlan_required) { 1483 netdev->hard_header_len += VLAN_HLEN; 1484 /* 1485 * As vlan is internally used, 1486 * we can not receive vlan packets 1487 */ 1488 netdev->features |= NETIF_F_VLAN_CHALLENGED; 1489 } 1490 1491 /* MTU range: 64 - 1518 */ 1492 netdev->min_mtu = GELIC_NET_MIN_MTU; 1493 netdev->max_mtu = GELIC_NET_MAX_MTU; 1494 1495 status = register_netdev(netdev); 1496 if (status) { 1497 dev_err(ctodev(card), "%s:Couldn't register %s %d\n", 1498 __func__, netdev->name, status); 1499 return status; 1500 } 1501 dev_info(ctodev(card), "%s: MAC addr %pM\n", 1502 netdev->name, netdev->dev_addr); 1503 1504 return 0; 1505 } 1506 1507 /** 1508 * gelic_alloc_card_net - allocates net_device and card structure 1509 * 1510 * returns the card structure or NULL in case of errors 1511 * 1512 * the card and net_device structures are linked to each other 1513 */ 1514 #define GELIC_ALIGN (32) 1515 static struct gelic_card *gelic_alloc_card_net(struct net_device **netdev) 1516 { 1517 struct gelic_card *card; 1518 struct gelic_port *port; 1519 void *p; 1520 size_t alloc_size; 1521 /* 1522 * gelic requires dma descriptor is 32 bytes aligned and 1523 * the hypervisor requires irq_status is 8 bytes aligned. 1524 */ 1525 BUILD_BUG_ON(offsetof(struct gelic_card, irq_status) % 8); 1526 BUILD_BUG_ON(offsetof(struct gelic_card, descr) % 32); 1527 alloc_size = 1528 sizeof(struct gelic_card) + 1529 sizeof(struct gelic_descr) * GELIC_NET_RX_DESCRIPTORS + 1530 sizeof(struct gelic_descr) * GELIC_NET_TX_DESCRIPTORS + 1531 GELIC_ALIGN - 1; 1532 1533 p = kzalloc(alloc_size, GFP_KERNEL); 1534 if (!p) 1535 return NULL; 1536 card = PTR_ALIGN(p, GELIC_ALIGN); 1537 card->unalign = p; 1538 1539 /* 1540 * alloc netdev 1541 */ 1542 *netdev = alloc_etherdev(sizeof(struct gelic_port)); 1543 if (!*netdev) { 1544 kfree(card->unalign); 1545 return NULL; 1546 } 1547 port = netdev_priv(*netdev); 1548 1549 /* gelic_port */ 1550 port->netdev = *netdev; 1551 port->card = card; 1552 port->type = GELIC_PORT_ETHERNET_0; 1553 1554 /* gelic_card */ 1555 card->netdev[GELIC_PORT_ETHERNET_0] = *netdev; 1556 1557 INIT_WORK(&card->tx_timeout_task, gelic_net_tx_timeout_task); 1558 init_waitqueue_head(&card->waitq); 1559 atomic_set(&card->tx_timeout_task_counter, 0); 1560 mutex_init(&card->updown_lock); 1561 atomic_set(&card->users, 0); 1562 1563 return card; 1564 } 1565 1566 static void gelic_card_get_vlan_info(struct gelic_card *card) 1567 { 1568 u64 v1, v2; 1569 int status; 1570 unsigned int i; 1571 struct { 1572 int tx; 1573 int rx; 1574 } vlan_id_ix[2] = { 1575 [GELIC_PORT_ETHERNET_0] = { 1576 .tx = GELIC_LV1_VLAN_TX_ETHERNET_0, 1577 .rx = GELIC_LV1_VLAN_RX_ETHERNET_0 1578 }, 1579 [GELIC_PORT_WIRELESS] = { 1580 .tx = GELIC_LV1_VLAN_TX_WIRELESS, 1581 .rx = GELIC_LV1_VLAN_RX_WIRELESS 1582 } 1583 }; 1584 1585 for (i = 0; i < ARRAY_SIZE(vlan_id_ix); i++) { 1586 /* tx tag */ 1587 status = lv1_net_control(bus_id(card), dev_id(card), 1588 GELIC_LV1_GET_VLAN_ID, 1589 vlan_id_ix[i].tx, 1590 0, 0, &v1, &v2); 1591 if (status || !v1) { 1592 if (status != LV1_NO_ENTRY) 1593 dev_dbg(ctodev(card), 1594 "get vlan id for tx(%d) failed(%d)\n", 1595 vlan_id_ix[i].tx, status); 1596 card->vlan[i].tx = 0; 1597 card->vlan[i].rx = 0; 1598 continue; 1599 } 1600 card->vlan[i].tx = (u16)v1; 1601 1602 /* rx tag */ 1603 status = lv1_net_control(bus_id(card), dev_id(card), 1604 GELIC_LV1_GET_VLAN_ID, 1605 vlan_id_ix[i].rx, 1606 0, 0, &v1, &v2); 1607 if (status || !v1) { 1608 if (status != LV1_NO_ENTRY) 1609 dev_info(ctodev(card), 1610 "get vlan id for rx(%d) failed(%d)\n", 1611 vlan_id_ix[i].rx, status); 1612 card->vlan[i].tx = 0; 1613 card->vlan[i].rx = 0; 1614 continue; 1615 } 1616 card->vlan[i].rx = (u16)v1; 1617 1618 dev_dbg(ctodev(card), "vlan_id[%d] tx=%02x rx=%02x\n", 1619 i, card->vlan[i].tx, card->vlan[i].rx); 1620 } 1621 1622 if (card->vlan[GELIC_PORT_ETHERNET_0].tx) { 1623 BUG_ON(!card->vlan[GELIC_PORT_WIRELESS].tx); 1624 card->vlan_required = 1; 1625 } else 1626 card->vlan_required = 0; 1627 1628 /* check wirelss capable firmware */ 1629 if (ps3_compare_firmware_version(1, 6, 0) < 0) { 1630 card->vlan[GELIC_PORT_WIRELESS].tx = 0; 1631 card->vlan[GELIC_PORT_WIRELESS].rx = 0; 1632 } 1633 1634 dev_info(ctodev(card), "internal vlan %s\n", 1635 card->vlan_required? "enabled" : "disabled"); 1636 } 1637 /* 1638 * ps3_gelic_driver_probe - add a device to the control of this driver 1639 */ 1640 static int ps3_gelic_driver_probe(struct ps3_system_bus_device *dev) 1641 { 1642 struct gelic_card *card; 1643 struct net_device *netdev; 1644 int result; 1645 1646 pr_debug("%s: called\n", __func__); 1647 1648 udbg_shutdown_ps3gelic(); 1649 1650 result = ps3_open_hv_device(dev); 1651 1652 if (result) { 1653 dev_dbg(&dev->core, "%s:ps3_open_hv_device failed\n", 1654 __func__); 1655 goto fail_open; 1656 } 1657 1658 result = ps3_dma_region_create(dev->d_region); 1659 1660 if (result) { 1661 dev_dbg(&dev->core, "%s:ps3_dma_region_create failed(%d)\n", 1662 __func__, result); 1663 BUG_ON("check region type"); 1664 goto fail_dma_region; 1665 } 1666 1667 /* alloc card/netdevice */ 1668 card = gelic_alloc_card_net(&netdev); 1669 if (!card) { 1670 dev_info(&dev->core, "%s:gelic_net_alloc_card failed\n", 1671 __func__); 1672 result = -ENOMEM; 1673 goto fail_alloc_card; 1674 } 1675 ps3_system_bus_set_drvdata(dev, card); 1676 card->dev = dev; 1677 1678 /* get internal vlan info */ 1679 gelic_card_get_vlan_info(card); 1680 1681 card->link_mode = GELIC_LV1_ETHER_AUTO_NEG; 1682 1683 /* setup interrupt */ 1684 result = lv1_net_set_interrupt_status_indicator(bus_id(card), 1685 dev_id(card), 1686 ps3_mm_phys_to_lpar(__pa(&card->irq_status)), 1687 0); 1688 1689 if (result) { 1690 dev_dbg(&dev->core, 1691 "%s:set_interrupt_status_indicator failed: %s\n", 1692 __func__, ps3_result(result)); 1693 result = -EIO; 1694 goto fail_status_indicator; 1695 } 1696 1697 result = ps3_sb_event_receive_port_setup(dev, PS3_BINDING_CPU_ANY, 1698 &card->irq); 1699 1700 if (result) { 1701 dev_info(ctodev(card), 1702 "%s:gelic_net_open_device failed (%d)\n", 1703 __func__, result); 1704 result = -EPERM; 1705 goto fail_alloc_irq; 1706 } 1707 result = request_irq(card->irq, gelic_card_interrupt, 1708 0, netdev->name, card); 1709 1710 if (result) { 1711 dev_info(ctodev(card), "%s:request_irq failed (%d)\n", 1712 __func__, result); 1713 goto fail_request_irq; 1714 } 1715 1716 /* setup card structure */ 1717 card->irq_mask = GELIC_CARD_RXINT | GELIC_CARD_TXINT | 1718 GELIC_CARD_PORT_STATUS_CHANGED; 1719 1720 1721 result = gelic_card_init_chain(card, &card->tx_chain, 1722 card->descr, GELIC_NET_TX_DESCRIPTORS); 1723 if (result) 1724 goto fail_alloc_tx; 1725 result = gelic_card_init_chain(card, &card->rx_chain, 1726 card->descr + GELIC_NET_TX_DESCRIPTORS, 1727 GELIC_NET_RX_DESCRIPTORS); 1728 if (result) 1729 goto fail_alloc_rx; 1730 1731 /* head of chain */ 1732 card->tx_top = card->tx_chain.head; 1733 card->rx_top = card->rx_chain.head; 1734 dev_dbg(ctodev(card), "descr rx %p, tx %p, size %#lx, num %#x\n", 1735 card->rx_top, card->tx_top, sizeof(struct gelic_descr), 1736 GELIC_NET_RX_DESCRIPTORS); 1737 /* allocate rx skbs */ 1738 result = gelic_card_alloc_rx_skbs(card); 1739 if (result) 1740 goto fail_alloc_skbs; 1741 1742 spin_lock_init(&card->tx_lock); 1743 card->tx_dma_progress = 0; 1744 1745 /* setup net_device structure */ 1746 netdev->irq = card->irq; 1747 SET_NETDEV_DEV(netdev, &card->dev->core); 1748 gelic_ether_setup_netdev_ops(netdev, &card->napi); 1749 result = gelic_net_setup_netdev(netdev, card); 1750 if (result) { 1751 dev_dbg(&dev->core, "%s: setup_netdev failed %d\n", 1752 __func__, result); 1753 goto fail_setup_netdev; 1754 } 1755 1756 #ifdef CONFIG_GELIC_WIRELESS 1757 result = gelic_wl_driver_probe(card); 1758 if (result) { 1759 dev_dbg(&dev->core, "%s: WL init failed\n", __func__); 1760 goto fail_setup_netdev; 1761 } 1762 #endif 1763 pr_debug("%s: done\n", __func__); 1764 return 0; 1765 1766 fail_setup_netdev: 1767 fail_alloc_skbs: 1768 gelic_card_free_chain(card, card->rx_chain.head); 1769 fail_alloc_rx: 1770 gelic_card_free_chain(card, card->tx_chain.head); 1771 fail_alloc_tx: 1772 free_irq(card->irq, card); 1773 netdev->irq = 0; 1774 fail_request_irq: 1775 ps3_sb_event_receive_port_destroy(dev, card->irq); 1776 fail_alloc_irq: 1777 lv1_net_set_interrupt_status_indicator(bus_id(card), 1778 bus_id(card), 1779 0, 0); 1780 fail_status_indicator: 1781 ps3_system_bus_set_drvdata(dev, NULL); 1782 kfree(netdev_card(netdev)->unalign); 1783 free_netdev(netdev); 1784 fail_alloc_card: 1785 ps3_dma_region_free(dev->d_region); 1786 fail_dma_region: 1787 ps3_close_hv_device(dev); 1788 fail_open: 1789 return result; 1790 } 1791 1792 /* 1793 * ps3_gelic_driver_remove - remove a device from the control of this driver 1794 */ 1795 1796 static void ps3_gelic_driver_remove(struct ps3_system_bus_device *dev) 1797 { 1798 struct gelic_card *card = ps3_system_bus_get_drvdata(dev); 1799 struct net_device *netdev0; 1800 pr_debug("%s: called\n", __func__); 1801 1802 /* set auto-negotiation */ 1803 gelic_card_set_link_mode(card, GELIC_LV1_ETHER_AUTO_NEG); 1804 1805 #ifdef CONFIG_GELIC_WIRELESS 1806 gelic_wl_driver_remove(card); 1807 #endif 1808 /* stop interrupt */ 1809 gelic_card_set_irq_mask(card, 0); 1810 1811 /* turn off DMA, force end */ 1812 gelic_card_disable_rxdmac(card); 1813 gelic_card_disable_txdmac(card); 1814 1815 /* release chains */ 1816 gelic_card_release_tx_chain(card, 1); 1817 gelic_card_release_rx_chain(card); 1818 1819 gelic_card_free_chain(card, card->tx_top); 1820 gelic_card_free_chain(card, card->rx_top); 1821 1822 netdev0 = card->netdev[GELIC_PORT_ETHERNET_0]; 1823 /* disconnect event port */ 1824 free_irq(card->irq, card); 1825 netdev0->irq = 0; 1826 ps3_sb_event_receive_port_destroy(card->dev, card->irq); 1827 1828 wait_event(card->waitq, 1829 atomic_read(&card->tx_timeout_task_counter) == 0); 1830 1831 lv1_net_set_interrupt_status_indicator(bus_id(card), dev_id(card), 1832 0 , 0); 1833 1834 unregister_netdev(netdev0); 1835 kfree(netdev_card(netdev0)->unalign); 1836 free_netdev(netdev0); 1837 1838 ps3_system_bus_set_drvdata(dev, NULL); 1839 1840 ps3_dma_region_free(dev->d_region); 1841 1842 ps3_close_hv_device(dev); 1843 1844 pr_debug("%s: done\n", __func__); 1845 } 1846 1847 static struct ps3_system_bus_driver ps3_gelic_driver = { 1848 .match_id = PS3_MATCH_ID_GELIC, 1849 .probe = ps3_gelic_driver_probe, 1850 .remove = ps3_gelic_driver_remove, 1851 .shutdown = ps3_gelic_driver_remove, 1852 .core.name = "ps3_gelic_driver", 1853 .core.owner = THIS_MODULE, 1854 }; 1855 1856 static int __init ps3_gelic_driver_init (void) 1857 { 1858 return firmware_has_feature(FW_FEATURE_PS3_LV1) 1859 ? ps3_system_bus_driver_register(&ps3_gelic_driver) 1860 : -ENODEV; 1861 } 1862 1863 static void __exit ps3_gelic_driver_exit (void) 1864 { 1865 ps3_system_bus_driver_unregister(&ps3_gelic_driver); 1866 } 1867 1868 module_init(ps3_gelic_driver_init); 1869 module_exit(ps3_gelic_driver_exit); 1870 1871 MODULE_ALIAS(PS3_MODULE_ALIAS_GELIC); 1872 1873