1 /*
2  *  PS3 gelic network driver.
3  *
4  * Copyright (C) 2007 Sony Computer Entertainment Inc.
5  * Copyright 2006, 2007 Sony Corporation
6  *
7  * This file is based on: spider_net.c
8  *
9  * (C) Copyright IBM Corp. 2005
10  *
11  * Authors : Utz Bacher <utz.bacher@de.ibm.com>
12  *           Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
13  *
14  * This program is free software; you can redistribute it and/or modify
15  * it under the terms of the GNU General Public License as published by
16  * the Free Software Foundation; either version 2, or (at your option)
17  * any later version.
18  *
19  * This program is distributed in the hope that it will be useful,
20  * but WITHOUT ANY WARRANTY; without even the implied warranty of
21  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
22  * GNU General Public License for more details.
23  *
24  * You should have received a copy of the GNU General Public License
25  * along with this program; if not, write to the Free Software
26  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
27  */
28 
29 #undef DEBUG
30 
31 #include <linux/interrupt.h>
32 #include <linux/kernel.h>
33 #include <linux/module.h>
34 #include <linux/slab.h>
35 
36 #include <linux/etherdevice.h>
37 #include <linux/ethtool.h>
38 #include <linux/if_vlan.h>
39 
40 #include <linux/in.h>
41 #include <linux/ip.h>
42 #include <linux/tcp.h>
43 
44 #include <linux/dma-mapping.h>
45 #include <net/checksum.h>
46 #include <asm/firmware.h>
47 #include <asm/ps3.h>
48 #include <asm/lv1call.h>
49 
50 #include "ps3_gelic_net.h"
51 #include "ps3_gelic_wireless.h"
52 
53 #define DRV_NAME "Gelic Network Driver"
54 #define DRV_VERSION "2.0"
55 
56 MODULE_AUTHOR("SCE Inc.");
57 MODULE_DESCRIPTION("Gelic Network driver");
58 MODULE_LICENSE("GPL");
59 
60 
61 /* set irq_mask */
62 int gelic_card_set_irq_mask(struct gelic_card *card, u64 mask)
63 {
64 	int status;
65 
66 	status = lv1_net_set_interrupt_mask(bus_id(card), dev_id(card),
67 					    mask, 0);
68 	if (status)
69 		dev_info(ctodev(card),
70 			 "%s failed %d\n", __func__, status);
71 	return status;
72 }
73 
74 static void gelic_card_rx_irq_on(struct gelic_card *card)
75 {
76 	card->irq_mask |= GELIC_CARD_RXINT;
77 	gelic_card_set_irq_mask(card, card->irq_mask);
78 }
79 static void gelic_card_rx_irq_off(struct gelic_card *card)
80 {
81 	card->irq_mask &= ~GELIC_CARD_RXINT;
82 	gelic_card_set_irq_mask(card, card->irq_mask);
83 }
84 
85 static void gelic_card_get_ether_port_status(struct gelic_card *card,
86 					     int inform)
87 {
88 	u64 v2;
89 	struct net_device *ether_netdev;
90 
91 	lv1_net_control(bus_id(card), dev_id(card),
92 			GELIC_LV1_GET_ETH_PORT_STATUS,
93 			GELIC_LV1_VLAN_TX_ETHERNET_0, 0, 0,
94 			&card->ether_port_status, &v2);
95 
96 	if (inform) {
97 		ether_netdev = card->netdev[GELIC_PORT_ETHERNET_0];
98 		if (card->ether_port_status & GELIC_LV1_ETHER_LINK_UP)
99 			netif_carrier_on(ether_netdev);
100 		else
101 			netif_carrier_off(ether_netdev);
102 	}
103 }
104 
105 /**
106  * gelic_descr_get_status -- returns the status of a descriptor
107  * @descr: descriptor to look at
108  *
109  * returns the status as in the dmac_cmd_status field of the descriptor
110  */
111 static enum gelic_descr_dma_status
112 gelic_descr_get_status(struct gelic_descr *descr)
113 {
114 	return be32_to_cpu(descr->dmac_cmd_status) & GELIC_DESCR_DMA_STAT_MASK;
115 }
116 
117 static int gelic_card_set_link_mode(struct gelic_card *card, int mode)
118 {
119 	int status;
120 	u64 v1, v2;
121 
122 	status = lv1_net_control(bus_id(card), dev_id(card),
123 				 GELIC_LV1_SET_NEGOTIATION_MODE,
124 				 GELIC_LV1_PHY_ETHERNET_0, mode, 0, &v1, &v2);
125 	if (status) {
126 		pr_info("%s: failed setting negotiation mode %d\n", __func__,
127 			status);
128 		return -EBUSY;
129 	}
130 
131 	card->link_mode = mode;
132 	return 0;
133 }
134 
135 /**
136  * gelic_card_disable_txdmac - disables the transmit DMA controller
137  * @card: card structure
138  *
139  * gelic_card_disable_txdmac terminates processing on the DMA controller by
140  * turing off DMA and issuing a force end
141  */
142 static void gelic_card_disable_txdmac(struct gelic_card *card)
143 {
144 	int status;
145 
146 	/* this hvc blocks until the DMA in progress really stopped */
147 	status = lv1_net_stop_tx_dma(bus_id(card), dev_id(card));
148 	if (status)
149 		dev_err(ctodev(card),
150 			"lv1_net_stop_tx_dma failed, status=%d\n", status);
151 }
152 
153 /**
154  * gelic_card_enable_rxdmac - enables the receive DMA controller
155  * @card: card structure
156  *
157  * gelic_card_enable_rxdmac enables the DMA controller by setting RX_DMA_EN
158  * in the GDADMACCNTR register
159  */
160 static void gelic_card_enable_rxdmac(struct gelic_card *card)
161 {
162 	int status;
163 
164 #ifdef DEBUG
165 	if (gelic_descr_get_status(card->rx_chain.head) !=
166 	    GELIC_DESCR_DMA_CARDOWNED) {
167 		printk(KERN_ERR "%s: status=%x\n", __func__,
168 		       be32_to_cpu(card->rx_chain.head->dmac_cmd_status));
169 		printk(KERN_ERR "%s: nextphy=%x\n", __func__,
170 		       be32_to_cpu(card->rx_chain.head->next_descr_addr));
171 		printk(KERN_ERR "%s: head=%p\n", __func__,
172 		       card->rx_chain.head);
173 	}
174 #endif
175 	status = lv1_net_start_rx_dma(bus_id(card), dev_id(card),
176 				card->rx_chain.head->bus_addr, 0);
177 	if (status)
178 		dev_info(ctodev(card),
179 			 "lv1_net_start_rx_dma failed, status=%d\n", status);
180 }
181 
182 /**
183  * gelic_card_disable_rxdmac - disables the receive DMA controller
184  * @card: card structure
185  *
186  * gelic_card_disable_rxdmac terminates processing on the DMA controller by
187  * turing off DMA and issuing a force end
188  */
189 static void gelic_card_disable_rxdmac(struct gelic_card *card)
190 {
191 	int status;
192 
193 	/* this hvc blocks until the DMA in progress really stopped */
194 	status = lv1_net_stop_rx_dma(bus_id(card), dev_id(card));
195 	if (status)
196 		dev_err(ctodev(card),
197 			"lv1_net_stop_rx_dma failed, %d\n", status);
198 }
199 
200 /**
201  * gelic_descr_set_status -- sets the status of a descriptor
202  * @descr: descriptor to change
203  * @status: status to set in the descriptor
204  *
205  * changes the status to the specified value. Doesn't change other bits
206  * in the status
207  */
208 static void gelic_descr_set_status(struct gelic_descr *descr,
209 				   enum gelic_descr_dma_status status)
210 {
211 	descr->dmac_cmd_status = cpu_to_be32(status |
212 			(be32_to_cpu(descr->dmac_cmd_status) &
213 			 ~GELIC_DESCR_DMA_STAT_MASK));
214 	/*
215 	 * dma_cmd_status field is used to indicate whether the descriptor
216 	 * is valid or not.
217 	 * Usually caller of this function wants to inform that to the
218 	 * hardware, so we assure here the hardware sees the change.
219 	 */
220 	wmb();
221 }
222 
223 /**
224  * gelic_card_reset_chain - reset status of a descriptor chain
225  * @card: card structure
226  * @chain: address of chain
227  * @start_descr: address of descriptor array
228  *
229  * Reset the status of dma descriptors to ready state
230  * and re-initialize the hardware chain for later use
231  */
232 static void gelic_card_reset_chain(struct gelic_card *card,
233 				   struct gelic_descr_chain *chain,
234 				   struct gelic_descr *start_descr)
235 {
236 	struct gelic_descr *descr;
237 
238 	for (descr = start_descr; start_descr != descr->next; descr++) {
239 		gelic_descr_set_status(descr, GELIC_DESCR_DMA_CARDOWNED);
240 		descr->next_descr_addr = cpu_to_be32(descr->next->bus_addr);
241 	}
242 
243 	chain->head = start_descr;
244 	chain->tail = (descr - 1);
245 
246 	(descr - 1)->next_descr_addr = 0;
247 }
248 
249 void gelic_card_up(struct gelic_card *card)
250 {
251 	pr_debug("%s: called\n", __func__);
252 	mutex_lock(&card->updown_lock);
253 	if (atomic_inc_return(&card->users) == 1) {
254 		pr_debug("%s: real do\n", __func__);
255 		/* enable irq */
256 		gelic_card_set_irq_mask(card, card->irq_mask);
257 		/* start rx */
258 		gelic_card_enable_rxdmac(card);
259 
260 		napi_enable(&card->napi);
261 	}
262 	mutex_unlock(&card->updown_lock);
263 	pr_debug("%s: done\n", __func__);
264 }
265 
266 void gelic_card_down(struct gelic_card *card)
267 {
268 	u64 mask;
269 	pr_debug("%s: called\n", __func__);
270 	mutex_lock(&card->updown_lock);
271 	if (atomic_dec_if_positive(&card->users) == 0) {
272 		pr_debug("%s: real do\n", __func__);
273 		napi_disable(&card->napi);
274 		/*
275 		 * Disable irq. Wireless interrupts will
276 		 * be disabled later if any
277 		 */
278 		mask = card->irq_mask & (GELIC_CARD_WLAN_EVENT_RECEIVED |
279 					 GELIC_CARD_WLAN_COMMAND_COMPLETED);
280 		gelic_card_set_irq_mask(card, mask);
281 		/* stop rx */
282 		gelic_card_disable_rxdmac(card);
283 		gelic_card_reset_chain(card, &card->rx_chain,
284 				       card->descr + GELIC_NET_TX_DESCRIPTORS);
285 		/* stop tx */
286 		gelic_card_disable_txdmac(card);
287 	}
288 	mutex_unlock(&card->updown_lock);
289 	pr_debug("%s: done\n", __func__);
290 }
291 
292 /**
293  * gelic_card_free_chain - free descriptor chain
294  * @card: card structure
295  * @descr_in: address of desc
296  */
297 static void gelic_card_free_chain(struct gelic_card *card,
298 				  struct gelic_descr *descr_in)
299 {
300 	struct gelic_descr *descr;
301 
302 	for (descr = descr_in; descr && descr->bus_addr; descr = descr->next) {
303 		dma_unmap_single(ctodev(card), descr->bus_addr,
304 				 GELIC_DESCR_SIZE, DMA_BIDIRECTIONAL);
305 		descr->bus_addr = 0;
306 	}
307 }
308 
309 /**
310  * gelic_card_init_chain - links descriptor chain
311  * @card: card structure
312  * @chain: address of chain
313  * @start_descr: address of descriptor array
314  * @no: number of descriptors
315  *
316  * we manage a circular list that mirrors the hardware structure,
317  * except that the hardware uses bus addresses.
318  *
319  * returns 0 on success, <0 on failure
320  */
321 static int gelic_card_init_chain(struct gelic_card *card,
322 				 struct gelic_descr_chain *chain,
323 				 struct gelic_descr *start_descr, int no)
324 {
325 	int i;
326 	struct gelic_descr *descr;
327 
328 	descr = start_descr;
329 	memset(descr, 0, sizeof(*descr) * no);
330 
331 	/* set up the hardware pointers in each descriptor */
332 	for (i = 0; i < no; i++, descr++) {
333 		gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
334 		descr->bus_addr =
335 			dma_map_single(ctodev(card), descr,
336 				       GELIC_DESCR_SIZE,
337 				       DMA_BIDIRECTIONAL);
338 
339 		if (!descr->bus_addr)
340 			goto iommu_error;
341 
342 		descr->next = descr + 1;
343 		descr->prev = descr - 1;
344 	}
345 	/* make them as ring */
346 	(descr - 1)->next = start_descr;
347 	start_descr->prev = (descr - 1);
348 
349 	/* chain bus addr of hw descriptor */
350 	descr = start_descr;
351 	for (i = 0; i < no; i++, descr++) {
352 		descr->next_descr_addr = cpu_to_be32(descr->next->bus_addr);
353 	}
354 
355 	chain->head = start_descr;
356 	chain->tail = start_descr;
357 
358 	/* do not chain last hw descriptor */
359 	(descr - 1)->next_descr_addr = 0;
360 
361 	return 0;
362 
363 iommu_error:
364 	for (i--, descr--; 0 <= i; i--, descr--)
365 		if (descr->bus_addr)
366 			dma_unmap_single(ctodev(card), descr->bus_addr,
367 					 GELIC_DESCR_SIZE,
368 					 DMA_BIDIRECTIONAL);
369 	return -ENOMEM;
370 }
371 
372 /**
373  * gelic_descr_prepare_rx - reinitializes a rx descriptor
374  * @card: card structure
375  * @descr: descriptor to re-init
376  *
377  * return 0 on success, <0 on failure
378  *
379  * allocates a new rx skb, iommu-maps it and attaches it to the descriptor.
380  * Activate the descriptor state-wise
381  */
382 static int gelic_descr_prepare_rx(struct gelic_card *card,
383 				  struct gelic_descr *descr)
384 {
385 	int offset;
386 	unsigned int bufsize;
387 
388 	if (gelic_descr_get_status(descr) !=  GELIC_DESCR_DMA_NOT_IN_USE)
389 		dev_info(ctodev(card), "%s: ERROR status\n", __func__);
390 	/* we need to round up the buffer size to a multiple of 128 */
391 	bufsize = ALIGN(GELIC_NET_MAX_MTU, GELIC_NET_RXBUF_ALIGN);
392 
393 	/* and we need to have it 128 byte aligned, therefore we allocate a
394 	 * bit more */
395 	descr->skb = dev_alloc_skb(bufsize + GELIC_NET_RXBUF_ALIGN - 1);
396 	if (!descr->skb) {
397 		descr->buf_addr = 0; /* tell DMAC don't touch memory */
398 		dev_info(ctodev(card),
399 			 "%s:allocate skb failed !!\n", __func__);
400 		return -ENOMEM;
401 	}
402 	descr->buf_size = cpu_to_be32(bufsize);
403 	descr->dmac_cmd_status = 0;
404 	descr->result_size = 0;
405 	descr->valid_size = 0;
406 	descr->data_error = 0;
407 
408 	offset = ((unsigned long)descr->skb->data) &
409 		(GELIC_NET_RXBUF_ALIGN - 1);
410 	if (offset)
411 		skb_reserve(descr->skb, GELIC_NET_RXBUF_ALIGN - offset);
412 	/* io-mmu-map the skb */
413 	descr->buf_addr = cpu_to_be32(dma_map_single(ctodev(card),
414 						     descr->skb->data,
415 						     GELIC_NET_MAX_MTU,
416 						     DMA_FROM_DEVICE));
417 	if (!descr->buf_addr) {
418 		dev_kfree_skb_any(descr->skb);
419 		descr->skb = NULL;
420 		dev_info(ctodev(card),
421 			 "%s:Could not iommu-map rx buffer\n", __func__);
422 		gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
423 		return -ENOMEM;
424 	} else {
425 		gelic_descr_set_status(descr, GELIC_DESCR_DMA_CARDOWNED);
426 		return 0;
427 	}
428 }
429 
430 /**
431  * gelic_card_release_rx_chain - free all skb of rx descr
432  * @card: card structure
433  *
434  */
435 static void gelic_card_release_rx_chain(struct gelic_card *card)
436 {
437 	struct gelic_descr *descr = card->rx_chain.head;
438 
439 	do {
440 		if (descr->skb) {
441 			dma_unmap_single(ctodev(card),
442 					 be32_to_cpu(descr->buf_addr),
443 					 descr->skb->len,
444 					 DMA_FROM_DEVICE);
445 			descr->buf_addr = 0;
446 			dev_kfree_skb_any(descr->skb);
447 			descr->skb = NULL;
448 			gelic_descr_set_status(descr,
449 					       GELIC_DESCR_DMA_NOT_IN_USE);
450 		}
451 		descr = descr->next;
452 	} while (descr != card->rx_chain.head);
453 }
454 
455 /**
456  * gelic_card_fill_rx_chain - fills descriptors/skbs in the rx chains
457  * @card: card structure
458  *
459  * fills all descriptors in the rx chain: allocates skbs
460  * and iommu-maps them.
461  * returns 0 on success, < 0 on failure
462  */
463 static int gelic_card_fill_rx_chain(struct gelic_card *card)
464 {
465 	struct gelic_descr *descr = card->rx_chain.head;
466 	int ret;
467 
468 	do {
469 		if (!descr->skb) {
470 			ret = gelic_descr_prepare_rx(card, descr);
471 			if (ret)
472 				goto rewind;
473 		}
474 		descr = descr->next;
475 	} while (descr != card->rx_chain.head);
476 
477 	return 0;
478 rewind:
479 	gelic_card_release_rx_chain(card);
480 	return ret;
481 }
482 
483 /**
484  * gelic_card_alloc_rx_skbs - allocates rx skbs in rx descriptor chains
485  * @card: card structure
486  *
487  * returns 0 on success, < 0 on failure
488  */
489 static int gelic_card_alloc_rx_skbs(struct gelic_card *card)
490 {
491 	struct gelic_descr_chain *chain;
492 	int ret;
493 	chain = &card->rx_chain;
494 	ret = gelic_card_fill_rx_chain(card);
495 	chain->tail = card->rx_top->prev; /* point to the last */
496 	return ret;
497 }
498 
499 /**
500  * gelic_descr_release_tx - processes a used tx descriptor
501  * @card: card structure
502  * @descr: descriptor to release
503  *
504  * releases a used tx descriptor (unmapping, freeing of skb)
505  */
506 static void gelic_descr_release_tx(struct gelic_card *card,
507 				       struct gelic_descr *descr)
508 {
509 	struct sk_buff *skb = descr->skb;
510 
511 	BUG_ON(!(be32_to_cpu(descr->data_status) & GELIC_DESCR_TX_TAIL));
512 
513 	dma_unmap_single(ctodev(card), be32_to_cpu(descr->buf_addr), skb->len,
514 			 DMA_TO_DEVICE);
515 	dev_kfree_skb_any(skb);
516 
517 	descr->buf_addr = 0;
518 	descr->buf_size = 0;
519 	descr->next_descr_addr = 0;
520 	descr->result_size = 0;
521 	descr->valid_size = 0;
522 	descr->data_status = 0;
523 	descr->data_error = 0;
524 	descr->skb = NULL;
525 
526 	/* set descr status */
527 	gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
528 }
529 
530 static void gelic_card_stop_queues(struct gelic_card *card)
531 {
532 	netif_stop_queue(card->netdev[GELIC_PORT_ETHERNET_0]);
533 
534 	if (card->netdev[GELIC_PORT_WIRELESS])
535 		netif_stop_queue(card->netdev[GELIC_PORT_WIRELESS]);
536 }
537 static void gelic_card_wake_queues(struct gelic_card *card)
538 {
539 	netif_wake_queue(card->netdev[GELIC_PORT_ETHERNET_0]);
540 
541 	if (card->netdev[GELIC_PORT_WIRELESS])
542 		netif_wake_queue(card->netdev[GELIC_PORT_WIRELESS]);
543 }
544 /**
545  * gelic_card_release_tx_chain - processes sent tx descriptors
546  * @card: adapter structure
547  * @stop: net_stop sequence
548  *
549  * releases the tx descriptors that gelic has finished with
550  */
551 static void gelic_card_release_tx_chain(struct gelic_card *card, int stop)
552 {
553 	struct gelic_descr_chain *tx_chain;
554 	enum gelic_descr_dma_status status;
555 	struct net_device *netdev;
556 	int release = 0;
557 
558 	for (tx_chain = &card->tx_chain;
559 	     tx_chain->head != tx_chain->tail && tx_chain->tail;
560 	     tx_chain->tail = tx_chain->tail->next) {
561 		status = gelic_descr_get_status(tx_chain->tail);
562 		netdev = tx_chain->tail->skb->dev;
563 		switch (status) {
564 		case GELIC_DESCR_DMA_RESPONSE_ERROR:
565 		case GELIC_DESCR_DMA_PROTECTION_ERROR:
566 		case GELIC_DESCR_DMA_FORCE_END:
567 			if (printk_ratelimit())
568 				dev_info(ctodev(card),
569 					 "%s: forcing end of tx descriptor " \
570 					 "with status %x\n",
571 					 __func__, status);
572 			netdev->stats.tx_dropped++;
573 			break;
574 
575 		case GELIC_DESCR_DMA_COMPLETE:
576 			if (tx_chain->tail->skb) {
577 				netdev->stats.tx_packets++;
578 				netdev->stats.tx_bytes +=
579 					tx_chain->tail->skb->len;
580 			}
581 			break;
582 
583 		case GELIC_DESCR_DMA_CARDOWNED:
584 			/* pending tx request */
585 		default:
586 			/* any other value (== GELIC_DESCR_DMA_NOT_IN_USE) */
587 			if (!stop)
588 				goto out;
589 		}
590 		gelic_descr_release_tx(card, tx_chain->tail);
591 		release ++;
592 	}
593 out:
594 	if (!stop && release)
595 		gelic_card_wake_queues(card);
596 }
597 
598 /**
599  * gelic_net_set_multi - sets multicast addresses and promisc flags
600  * @netdev: interface device structure
601  *
602  * gelic_net_set_multi configures multicast addresses as needed for the
603  * netdev interface. It also sets up multicast, allmulti and promisc
604  * flags appropriately
605  */
606 void gelic_net_set_multi(struct net_device *netdev)
607 {
608 	struct gelic_card *card = netdev_card(netdev);
609 	struct netdev_hw_addr *ha;
610 	unsigned int i;
611 	uint8_t *p;
612 	u64 addr;
613 	int status;
614 
615 	/* clear all multicast address */
616 	status = lv1_net_remove_multicast_address(bus_id(card), dev_id(card),
617 						  0, 1);
618 	if (status)
619 		dev_err(ctodev(card),
620 			"lv1_net_remove_multicast_address failed %d\n",
621 			status);
622 	/* set broadcast address */
623 	status = lv1_net_add_multicast_address(bus_id(card), dev_id(card),
624 					       GELIC_NET_BROADCAST_ADDR, 0);
625 	if (status)
626 		dev_err(ctodev(card),
627 			"lv1_net_add_multicast_address failed, %d\n",
628 			status);
629 
630 	if ((netdev->flags & IFF_ALLMULTI) ||
631 	    (netdev_mc_count(netdev) > GELIC_NET_MC_COUNT_MAX)) {
632 		status = lv1_net_add_multicast_address(bus_id(card),
633 						       dev_id(card),
634 						       0, 1);
635 		if (status)
636 			dev_err(ctodev(card),
637 				"lv1_net_add_multicast_address failed, %d\n",
638 				status);
639 		return;
640 	}
641 
642 	/* set multicast addresses */
643 	netdev_for_each_mc_addr(ha, netdev) {
644 		addr = 0;
645 		p = ha->addr;
646 		for (i = 0; i < ETH_ALEN; i++) {
647 			addr <<= 8;
648 			addr |= *p++;
649 		}
650 		status = lv1_net_add_multicast_address(bus_id(card),
651 						       dev_id(card),
652 						       addr, 0);
653 		if (status)
654 			dev_err(ctodev(card),
655 				"lv1_net_add_multicast_address failed, %d\n",
656 				status);
657 	}
658 }
659 
660 /**
661  * gelic_net_stop - called upon ifconfig down
662  * @netdev: interface device structure
663  *
664  * always returns 0
665  */
666 int gelic_net_stop(struct net_device *netdev)
667 {
668 	struct gelic_card *card;
669 
670 	pr_debug("%s: start\n", __func__);
671 
672 	netif_stop_queue(netdev);
673 	netif_carrier_off(netdev);
674 
675 	card = netdev_card(netdev);
676 	gelic_card_down(card);
677 
678 	pr_debug("%s: done\n", __func__);
679 	return 0;
680 }
681 
682 /**
683  * gelic_card_get_next_tx_descr - returns the next available tx descriptor
684  * @card: device structure to get descriptor from
685  *
686  * returns the address of the next descriptor, or NULL if not available.
687  */
688 static struct gelic_descr *
689 gelic_card_get_next_tx_descr(struct gelic_card *card)
690 {
691 	if (!card->tx_chain.head)
692 		return NULL;
693 	/*  see if the next descriptor is free */
694 	if (card->tx_chain.tail != card->tx_chain.head->next &&
695 	    gelic_descr_get_status(card->tx_chain.head) ==
696 	    GELIC_DESCR_DMA_NOT_IN_USE)
697 		return card->tx_chain.head;
698 	else
699 		return NULL;
700 
701 }
702 
703 /**
704  * gelic_net_set_txdescr_cmdstat - sets the tx descriptor command field
705  * @descr: descriptor structure to fill out
706  * @skb: packet to consider
707  *
708  * fills out the command and status field of the descriptor structure,
709  * depending on hardware checksum settings. This function assumes a wmb()
710  * has executed before.
711  */
712 static void gelic_descr_set_tx_cmdstat(struct gelic_descr *descr,
713 				       struct sk_buff *skb)
714 {
715 	if (skb->ip_summed != CHECKSUM_PARTIAL)
716 		descr->dmac_cmd_status =
717 			cpu_to_be32(GELIC_DESCR_DMA_CMD_NO_CHKSUM |
718 				    GELIC_DESCR_TX_DMA_FRAME_TAIL);
719 	else {
720 		/* is packet ip?
721 		 * if yes: tcp? udp? */
722 		if (skb->protocol == htons(ETH_P_IP)) {
723 			if (ip_hdr(skb)->protocol == IPPROTO_TCP)
724 				descr->dmac_cmd_status =
725 				cpu_to_be32(GELIC_DESCR_DMA_CMD_TCP_CHKSUM |
726 					    GELIC_DESCR_TX_DMA_FRAME_TAIL);
727 
728 			else if (ip_hdr(skb)->protocol == IPPROTO_UDP)
729 				descr->dmac_cmd_status =
730 				cpu_to_be32(GELIC_DESCR_DMA_CMD_UDP_CHKSUM |
731 					    GELIC_DESCR_TX_DMA_FRAME_TAIL);
732 			else	/*
733 				 * the stack should checksum non-tcp and non-udp
734 				 * packets on his own: NETIF_F_IP_CSUM
735 				 */
736 				descr->dmac_cmd_status =
737 				cpu_to_be32(GELIC_DESCR_DMA_CMD_NO_CHKSUM |
738 					    GELIC_DESCR_TX_DMA_FRAME_TAIL);
739 		}
740 	}
741 }
742 
743 static struct sk_buff *gelic_put_vlan_tag(struct sk_buff *skb,
744 						 unsigned short tag)
745 {
746 	struct vlan_ethhdr *veth;
747 	static unsigned int c;
748 
749 	if (skb_headroom(skb) < VLAN_HLEN) {
750 		struct sk_buff *sk_tmp = skb;
751 		pr_debug("%s: hd=%d c=%ud\n", __func__, skb_headroom(skb), c);
752 		skb = skb_realloc_headroom(sk_tmp, VLAN_HLEN);
753 		if (!skb)
754 			return NULL;
755 		dev_kfree_skb_any(sk_tmp);
756 	}
757 	veth = skb_push(skb, VLAN_HLEN);
758 
759 	/* Move the mac addresses to the top of buffer */
760 	memmove(skb->data, skb->data + VLAN_HLEN, 2 * ETH_ALEN);
761 
762 	veth->h_vlan_proto = cpu_to_be16(ETH_P_8021Q);
763 	veth->h_vlan_TCI = htons(tag);
764 
765 	return skb;
766 }
767 
768 /**
769  * gelic_descr_prepare_tx - setup a descriptor for sending packets
770  * @card: card structure
771  * @descr: descriptor structure
772  * @skb: packet to use
773  *
774  * returns 0 on success, <0 on failure.
775  *
776  */
777 static int gelic_descr_prepare_tx(struct gelic_card *card,
778 				  struct gelic_descr *descr,
779 				  struct sk_buff *skb)
780 {
781 	dma_addr_t buf;
782 
783 	if (card->vlan_required) {
784 		struct sk_buff *skb_tmp;
785 		enum gelic_port_type type;
786 
787 		type = netdev_port(skb->dev)->type;
788 		skb_tmp = gelic_put_vlan_tag(skb,
789 					     card->vlan[type].tx);
790 		if (!skb_tmp)
791 			return -ENOMEM;
792 		skb = skb_tmp;
793 	}
794 
795 	buf = dma_map_single(ctodev(card), skb->data, skb->len, DMA_TO_DEVICE);
796 
797 	if (!buf) {
798 		dev_err(ctodev(card),
799 			"dma map 2 failed (%p, %i). Dropping packet\n",
800 			skb->data, skb->len);
801 		return -ENOMEM;
802 	}
803 
804 	descr->buf_addr = cpu_to_be32(buf);
805 	descr->buf_size = cpu_to_be32(skb->len);
806 	descr->skb = skb;
807 	descr->data_status = 0;
808 	descr->next_descr_addr = 0; /* terminate hw descr */
809 	gelic_descr_set_tx_cmdstat(descr, skb);
810 
811 	/* bump free descriptor pointer */
812 	card->tx_chain.head = descr->next;
813 	return 0;
814 }
815 
816 /**
817  * gelic_card_kick_txdma - enables TX DMA processing
818  * @card: card structure
819  * @descr: descriptor address to enable TX processing at
820  *
821  */
822 static int gelic_card_kick_txdma(struct gelic_card *card,
823 				 struct gelic_descr *descr)
824 {
825 	int status = 0;
826 
827 	if (card->tx_dma_progress)
828 		return 0;
829 
830 	if (gelic_descr_get_status(descr) == GELIC_DESCR_DMA_CARDOWNED) {
831 		card->tx_dma_progress = 1;
832 		status = lv1_net_start_tx_dma(bus_id(card), dev_id(card),
833 					      descr->bus_addr, 0);
834 		if (status) {
835 			card->tx_dma_progress = 0;
836 			dev_info(ctodev(card), "lv1_net_start_txdma failed," \
837 				 "status=%d\n", status);
838 		}
839 	}
840 	return status;
841 }
842 
843 /**
844  * gelic_net_xmit - transmits a frame over the device
845  * @skb: packet to send out
846  * @netdev: interface device structure
847  *
848  * returns NETDEV_TX_OK on success, NETDEV_TX_BUSY on failure
849  */
850 netdev_tx_t gelic_net_xmit(struct sk_buff *skb, struct net_device *netdev)
851 {
852 	struct gelic_card *card = netdev_card(netdev);
853 	struct gelic_descr *descr;
854 	int result;
855 	unsigned long flags;
856 
857 	spin_lock_irqsave(&card->tx_lock, flags);
858 
859 	gelic_card_release_tx_chain(card, 0);
860 
861 	descr = gelic_card_get_next_tx_descr(card);
862 	if (!descr) {
863 		/*
864 		 * no more descriptors free
865 		 */
866 		gelic_card_stop_queues(card);
867 		spin_unlock_irqrestore(&card->tx_lock, flags);
868 		return NETDEV_TX_BUSY;
869 	}
870 
871 	result = gelic_descr_prepare_tx(card, descr, skb);
872 	if (result) {
873 		/*
874 		 * DMA map failed.  As chances are that failure
875 		 * would continue, just release skb and return
876 		 */
877 		netdev->stats.tx_dropped++;
878 		dev_kfree_skb_any(skb);
879 		spin_unlock_irqrestore(&card->tx_lock, flags);
880 		return NETDEV_TX_OK;
881 	}
882 	/*
883 	 * link this prepared descriptor to previous one
884 	 * to achieve high performance
885 	 */
886 	descr->prev->next_descr_addr = cpu_to_be32(descr->bus_addr);
887 	/*
888 	 * as hardware descriptor is modified in the above lines,
889 	 * ensure that the hardware sees it
890 	 */
891 	wmb();
892 	if (gelic_card_kick_txdma(card, descr)) {
893 		/*
894 		 * kick failed.
895 		 * release descriptor which was just prepared
896 		 */
897 		netdev->stats.tx_dropped++;
898 		/* don't trigger BUG_ON() in gelic_descr_release_tx */
899 		descr->data_status = cpu_to_be32(GELIC_DESCR_TX_TAIL);
900 		gelic_descr_release_tx(card, descr);
901 		/* reset head */
902 		card->tx_chain.head = descr;
903 		/* reset hw termination */
904 		descr->prev->next_descr_addr = 0;
905 		dev_info(ctodev(card), "%s: kick failure\n", __func__);
906 	}
907 
908 	spin_unlock_irqrestore(&card->tx_lock, flags);
909 	return NETDEV_TX_OK;
910 }
911 
912 /**
913  * gelic_net_pass_skb_up - takes an skb from a descriptor and passes it on
914  * @descr: descriptor to process
915  * @card: card structure
916  * @netdev: net_device structure to be passed packet
917  *
918  * iommu-unmaps the skb, fills out skb structure and passes the data to the
919  * stack. The descriptor state is not changed.
920  */
921 static void gelic_net_pass_skb_up(struct gelic_descr *descr,
922 				  struct gelic_card *card,
923 				  struct net_device *netdev)
924 
925 {
926 	struct sk_buff *skb = descr->skb;
927 	u32 data_status, data_error;
928 
929 	data_status = be32_to_cpu(descr->data_status);
930 	data_error = be32_to_cpu(descr->data_error);
931 	/* unmap skb buffer */
932 	dma_unmap_single(ctodev(card), be32_to_cpu(descr->buf_addr),
933 			 GELIC_NET_MAX_MTU,
934 			 DMA_FROM_DEVICE);
935 
936 	skb_put(skb, be32_to_cpu(descr->valid_size)?
937 		be32_to_cpu(descr->valid_size) :
938 		be32_to_cpu(descr->result_size));
939 	if (!descr->valid_size)
940 		dev_info(ctodev(card), "buffer full %x %x %x\n",
941 			 be32_to_cpu(descr->result_size),
942 			 be32_to_cpu(descr->buf_size),
943 			 be32_to_cpu(descr->dmac_cmd_status));
944 
945 	descr->skb = NULL;
946 	/*
947 	 * the card put 2 bytes vlan tag in front
948 	 * of the ethernet frame
949 	 */
950 	skb_pull(skb, 2);
951 	skb->protocol = eth_type_trans(skb, netdev);
952 
953 	/* checksum offload */
954 	if (netdev->features & NETIF_F_RXCSUM) {
955 		if ((data_status & GELIC_DESCR_DATA_STATUS_CHK_MASK) &&
956 		    (!(data_error & GELIC_DESCR_DATA_ERROR_CHK_MASK)))
957 			skb->ip_summed = CHECKSUM_UNNECESSARY;
958 		else
959 			skb_checksum_none_assert(skb);
960 	} else
961 		skb_checksum_none_assert(skb);
962 
963 	/* update netdevice statistics */
964 	netdev->stats.rx_packets++;
965 	netdev->stats.rx_bytes += skb->len;
966 
967 	/* pass skb up to stack */
968 	netif_receive_skb(skb);
969 }
970 
971 /**
972  * gelic_card_decode_one_descr - processes an rx descriptor
973  * @card: card structure
974  *
975  * returns 1 if a packet has been sent to the stack, otherwise 0
976  *
977  * processes an rx descriptor by iommu-unmapping the data buffer and passing
978  * the packet up to the stack
979  */
980 static int gelic_card_decode_one_descr(struct gelic_card *card)
981 {
982 	enum gelic_descr_dma_status status;
983 	struct gelic_descr_chain *chain = &card->rx_chain;
984 	struct gelic_descr *descr = chain->head;
985 	struct net_device *netdev = NULL;
986 	int dmac_chain_ended;
987 
988 	status = gelic_descr_get_status(descr);
989 
990 	if (status == GELIC_DESCR_DMA_CARDOWNED)
991 		return 0;
992 
993 	if (status == GELIC_DESCR_DMA_NOT_IN_USE) {
994 		dev_dbg(ctodev(card), "dormant descr? %p\n", descr);
995 		return 0;
996 	}
997 
998 	/* netdevice select */
999 	if (card->vlan_required) {
1000 		unsigned int i;
1001 		u16 vid;
1002 		vid = *(u16 *)(descr->skb->data) & VLAN_VID_MASK;
1003 		for (i = 0; i < GELIC_PORT_MAX; i++) {
1004 			if (card->vlan[i].rx == vid) {
1005 				netdev = card->netdev[i];
1006 				break;
1007 			}
1008 		}
1009 		if (GELIC_PORT_MAX <= i) {
1010 			pr_info("%s: unknown packet vid=%x\n", __func__, vid);
1011 			goto refill;
1012 		}
1013 	} else
1014 		netdev = card->netdev[GELIC_PORT_ETHERNET_0];
1015 
1016 	if ((status == GELIC_DESCR_DMA_RESPONSE_ERROR) ||
1017 	    (status == GELIC_DESCR_DMA_PROTECTION_ERROR) ||
1018 	    (status == GELIC_DESCR_DMA_FORCE_END)) {
1019 		dev_info(ctodev(card), "dropping RX descriptor with state %x\n",
1020 			 status);
1021 		netdev->stats.rx_dropped++;
1022 		goto refill;
1023 	}
1024 
1025 	if (status == GELIC_DESCR_DMA_BUFFER_FULL) {
1026 		/*
1027 		 * Buffer full would occur if and only if
1028 		 * the frame length was longer than the size of this
1029 		 * descriptor's buffer.  If the frame length was equal
1030 		 * to or shorter than buffer'size, FRAME_END condition
1031 		 * would occur.
1032 		 * Anyway this frame was longer than the MTU,
1033 		 * just drop it.
1034 		 */
1035 		dev_info(ctodev(card), "overlength frame\n");
1036 		goto refill;
1037 	}
1038 	/*
1039 	 * descriptors any other than FRAME_END here should
1040 	 * be treated as error.
1041 	 */
1042 	if (status != GELIC_DESCR_DMA_FRAME_END) {
1043 		dev_dbg(ctodev(card), "RX descriptor with state %x\n",
1044 			status);
1045 		goto refill;
1046 	}
1047 
1048 	/* ok, we've got a packet in descr */
1049 	gelic_net_pass_skb_up(descr, card, netdev);
1050 refill:
1051 
1052 	/* is the current descriptor terminated with next_descr == NULL? */
1053 	dmac_chain_ended =
1054 		be32_to_cpu(descr->dmac_cmd_status) &
1055 		GELIC_DESCR_RX_DMA_CHAIN_END;
1056 	/*
1057 	 * So that always DMAC can see the end
1058 	 * of the descriptor chain to avoid
1059 	 * from unwanted DMAC overrun.
1060 	 */
1061 	descr->next_descr_addr = 0;
1062 
1063 	/* change the descriptor state: */
1064 	gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
1065 
1066 	/*
1067 	 * this call can fail, but for now, just leave this
1068 	 * descriptor without skb
1069 	 */
1070 	gelic_descr_prepare_rx(card, descr);
1071 
1072 	chain->tail = descr;
1073 	chain->head = descr->next;
1074 
1075 	/*
1076 	 * Set this descriptor the end of the chain.
1077 	 */
1078 	descr->prev->next_descr_addr = cpu_to_be32(descr->bus_addr);
1079 
1080 	/*
1081 	 * If dmac chain was met, DMAC stopped.
1082 	 * thus re-enable it
1083 	 */
1084 
1085 	if (dmac_chain_ended)
1086 		gelic_card_enable_rxdmac(card);
1087 
1088 	return 1;
1089 }
1090 
1091 /**
1092  * gelic_net_poll - NAPI poll function called by the stack to return packets
1093  * @napi: napi structure
1094  * @budget: number of packets we can pass to the stack at most
1095  *
1096  * returns the number of the processed packets
1097  *
1098  */
1099 static int gelic_net_poll(struct napi_struct *napi, int budget)
1100 {
1101 	struct gelic_card *card = container_of(napi, struct gelic_card, napi);
1102 	int packets_done = 0;
1103 
1104 	while (packets_done < budget) {
1105 		if (!gelic_card_decode_one_descr(card))
1106 			break;
1107 
1108 		packets_done++;
1109 	}
1110 
1111 	if (packets_done < budget) {
1112 		napi_complete_done(napi, packets_done);
1113 		gelic_card_rx_irq_on(card);
1114 	}
1115 	return packets_done;
1116 }
1117 
1118 /**
1119  * gelic_card_interrupt - event handler for gelic_net
1120  */
1121 static irqreturn_t gelic_card_interrupt(int irq, void *ptr)
1122 {
1123 	unsigned long flags;
1124 	struct gelic_card *card = ptr;
1125 	u64 status;
1126 
1127 	status = card->irq_status;
1128 
1129 	if (!status)
1130 		return IRQ_NONE;
1131 
1132 	status &= card->irq_mask;
1133 
1134 	if (status & GELIC_CARD_RXINT) {
1135 		gelic_card_rx_irq_off(card);
1136 		napi_schedule(&card->napi);
1137 	}
1138 
1139 	if (status & GELIC_CARD_TXINT) {
1140 		spin_lock_irqsave(&card->tx_lock, flags);
1141 		card->tx_dma_progress = 0;
1142 		gelic_card_release_tx_chain(card, 0);
1143 		/* kick outstanding tx descriptor if any */
1144 		gelic_card_kick_txdma(card, card->tx_chain.tail);
1145 		spin_unlock_irqrestore(&card->tx_lock, flags);
1146 	}
1147 
1148 	/* ether port status changed */
1149 	if (status & GELIC_CARD_PORT_STATUS_CHANGED)
1150 		gelic_card_get_ether_port_status(card, 1);
1151 
1152 #ifdef CONFIG_GELIC_WIRELESS
1153 	if (status & (GELIC_CARD_WLAN_EVENT_RECEIVED |
1154 		      GELIC_CARD_WLAN_COMMAND_COMPLETED))
1155 		gelic_wl_interrupt(card->netdev[GELIC_PORT_WIRELESS], status);
1156 #endif
1157 
1158 	return IRQ_HANDLED;
1159 }
1160 
1161 #ifdef CONFIG_NET_POLL_CONTROLLER
1162 /**
1163  * gelic_net_poll_controller - artificial interrupt for netconsole etc.
1164  * @netdev: interface device structure
1165  *
1166  * see Documentation/networking/netconsole.txt
1167  */
1168 void gelic_net_poll_controller(struct net_device *netdev)
1169 {
1170 	struct gelic_card *card = netdev_card(netdev);
1171 
1172 	gelic_card_set_irq_mask(card, 0);
1173 	gelic_card_interrupt(netdev->irq, netdev);
1174 	gelic_card_set_irq_mask(card, card->irq_mask);
1175 }
1176 #endif /* CONFIG_NET_POLL_CONTROLLER */
1177 
1178 /**
1179  * gelic_net_open - called upon ifconfig up
1180  * @netdev: interface device structure
1181  *
1182  * returns 0 on success, <0 on failure
1183  *
1184  * gelic_net_open allocates all the descriptors and memory needed for
1185  * operation, sets up multicast list and enables interrupts
1186  */
1187 int gelic_net_open(struct net_device *netdev)
1188 {
1189 	struct gelic_card *card = netdev_card(netdev);
1190 
1191 	dev_dbg(ctodev(card), " -> %s %p\n", __func__, netdev);
1192 
1193 	gelic_card_up(card);
1194 
1195 	netif_start_queue(netdev);
1196 	gelic_card_get_ether_port_status(card, 1);
1197 
1198 	dev_dbg(ctodev(card), " <- %s\n", __func__);
1199 	return 0;
1200 }
1201 
1202 void gelic_net_get_drvinfo(struct net_device *netdev,
1203 			   struct ethtool_drvinfo *info)
1204 {
1205 	strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
1206 	strlcpy(info->version, DRV_VERSION, sizeof(info->version));
1207 }
1208 
1209 static int gelic_ether_get_link_ksettings(struct net_device *netdev,
1210 					  struct ethtool_link_ksettings *cmd)
1211 {
1212 	struct gelic_card *card = netdev_card(netdev);
1213 	u32 supported, advertising;
1214 
1215 	gelic_card_get_ether_port_status(card, 0);
1216 
1217 	if (card->ether_port_status & GELIC_LV1_ETHER_FULL_DUPLEX)
1218 		cmd->base.duplex = DUPLEX_FULL;
1219 	else
1220 		cmd->base.duplex = DUPLEX_HALF;
1221 
1222 	switch (card->ether_port_status & GELIC_LV1_ETHER_SPEED_MASK) {
1223 	case GELIC_LV1_ETHER_SPEED_10:
1224 		cmd->base.speed = SPEED_10;
1225 		break;
1226 	case GELIC_LV1_ETHER_SPEED_100:
1227 		cmd->base.speed = SPEED_100;
1228 		break;
1229 	case GELIC_LV1_ETHER_SPEED_1000:
1230 		cmd->base.speed = SPEED_1000;
1231 		break;
1232 	default:
1233 		pr_info("%s: speed unknown\n", __func__);
1234 		cmd->base.speed = SPEED_10;
1235 		break;
1236 	}
1237 
1238 	supported = SUPPORTED_TP | SUPPORTED_Autoneg |
1239 			SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
1240 			SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
1241 			SUPPORTED_1000baseT_Full;
1242 	advertising = supported;
1243 	if (card->link_mode & GELIC_LV1_ETHER_AUTO_NEG) {
1244 		cmd->base.autoneg = AUTONEG_ENABLE;
1245 	} else {
1246 		cmd->base.autoneg = AUTONEG_DISABLE;
1247 		advertising &= ~ADVERTISED_Autoneg;
1248 	}
1249 	cmd->base.port = PORT_TP;
1250 
1251 	ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
1252 						supported);
1253 	ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
1254 						advertising);
1255 
1256 	return 0;
1257 }
1258 
1259 static int
1260 gelic_ether_set_link_ksettings(struct net_device *netdev,
1261 			       const struct ethtool_link_ksettings *cmd)
1262 {
1263 	struct gelic_card *card = netdev_card(netdev);
1264 	u64 mode;
1265 	int ret;
1266 
1267 	if (cmd->base.autoneg == AUTONEG_ENABLE) {
1268 		mode = GELIC_LV1_ETHER_AUTO_NEG;
1269 	} else {
1270 		switch (cmd->base.speed) {
1271 		case SPEED_10:
1272 			mode = GELIC_LV1_ETHER_SPEED_10;
1273 			break;
1274 		case SPEED_100:
1275 			mode = GELIC_LV1_ETHER_SPEED_100;
1276 			break;
1277 		case SPEED_1000:
1278 			mode = GELIC_LV1_ETHER_SPEED_1000;
1279 			break;
1280 		default:
1281 			return -EINVAL;
1282 		}
1283 		if (cmd->base.duplex == DUPLEX_FULL) {
1284 			mode |= GELIC_LV1_ETHER_FULL_DUPLEX;
1285 		} else if (cmd->base.speed == SPEED_1000) {
1286 			pr_info("1000 half duplex is not supported.\n");
1287 			return -EINVAL;
1288 		}
1289 	}
1290 
1291 	ret = gelic_card_set_link_mode(card, mode);
1292 
1293 	if (ret)
1294 		return ret;
1295 
1296 	return 0;
1297 }
1298 
1299 static void gelic_net_get_wol(struct net_device *netdev,
1300 			      struct ethtool_wolinfo *wol)
1301 {
1302 	if (0 <= ps3_compare_firmware_version(2, 2, 0))
1303 		wol->supported = WAKE_MAGIC;
1304 	else
1305 		wol->supported = 0;
1306 
1307 	wol->wolopts = ps3_sys_manager_get_wol() ? wol->supported : 0;
1308 	memset(&wol->sopass, 0, sizeof(wol->sopass));
1309 }
1310 static int gelic_net_set_wol(struct net_device *netdev,
1311 			     struct ethtool_wolinfo *wol)
1312 {
1313 	int status;
1314 	struct gelic_card *card;
1315 	u64 v1, v2;
1316 
1317 	if (ps3_compare_firmware_version(2, 2, 0) < 0 ||
1318 	    !capable(CAP_NET_ADMIN))
1319 		return -EPERM;
1320 
1321 	if (wol->wolopts & ~WAKE_MAGIC)
1322 		return -EINVAL;
1323 
1324 	card = netdev_card(netdev);
1325 	if (wol->wolopts & WAKE_MAGIC) {
1326 		status = lv1_net_control(bus_id(card), dev_id(card),
1327 					 GELIC_LV1_SET_WOL,
1328 					 GELIC_LV1_WOL_MAGIC_PACKET,
1329 					 0, GELIC_LV1_WOL_MP_ENABLE,
1330 					 &v1, &v2);
1331 		if (status) {
1332 			pr_info("%s: enabling WOL failed %d\n", __func__,
1333 				status);
1334 			status = -EIO;
1335 			goto done;
1336 		}
1337 		status = lv1_net_control(bus_id(card), dev_id(card),
1338 					 GELIC_LV1_SET_WOL,
1339 					 GELIC_LV1_WOL_ADD_MATCH_ADDR,
1340 					 0, GELIC_LV1_WOL_MATCH_ALL,
1341 					 &v1, &v2);
1342 		if (!status)
1343 			ps3_sys_manager_set_wol(1);
1344 		else {
1345 			pr_info("%s: enabling WOL filter failed %d\n",
1346 				__func__, status);
1347 			status = -EIO;
1348 		}
1349 	} else {
1350 		status = lv1_net_control(bus_id(card), dev_id(card),
1351 					 GELIC_LV1_SET_WOL,
1352 					 GELIC_LV1_WOL_MAGIC_PACKET,
1353 					 0, GELIC_LV1_WOL_MP_DISABLE,
1354 					 &v1, &v2);
1355 		if (status) {
1356 			pr_info("%s: disabling WOL failed %d\n", __func__,
1357 				status);
1358 			status = -EIO;
1359 			goto done;
1360 		}
1361 		status = lv1_net_control(bus_id(card), dev_id(card),
1362 					 GELIC_LV1_SET_WOL,
1363 					 GELIC_LV1_WOL_DELETE_MATCH_ADDR,
1364 					 0, GELIC_LV1_WOL_MATCH_ALL,
1365 					 &v1, &v2);
1366 		if (!status)
1367 			ps3_sys_manager_set_wol(0);
1368 		else {
1369 			pr_info("%s: removing WOL filter failed %d\n",
1370 				__func__, status);
1371 			status = -EIO;
1372 		}
1373 	}
1374 done:
1375 	return status;
1376 }
1377 
1378 static const struct ethtool_ops gelic_ether_ethtool_ops = {
1379 	.get_drvinfo	= gelic_net_get_drvinfo,
1380 	.get_link	= ethtool_op_get_link,
1381 	.get_wol	= gelic_net_get_wol,
1382 	.set_wol	= gelic_net_set_wol,
1383 	.get_link_ksettings = gelic_ether_get_link_ksettings,
1384 	.set_link_ksettings = gelic_ether_set_link_ksettings,
1385 };
1386 
1387 /**
1388  * gelic_net_tx_timeout_task - task scheduled by the watchdog timeout
1389  * function (to be called not under interrupt status)
1390  * @work: work is context of tx timout task
1391  *
1392  * called as task when tx hangs, resets interface (if interface is up)
1393  */
1394 static void gelic_net_tx_timeout_task(struct work_struct *work)
1395 {
1396 	struct gelic_card *card =
1397 		container_of(work, struct gelic_card, tx_timeout_task);
1398 	struct net_device *netdev = card->netdev[GELIC_PORT_ETHERNET_0];
1399 
1400 	dev_info(ctodev(card), "%s:Timed out. Restarting...\n", __func__);
1401 
1402 	if (!(netdev->flags & IFF_UP))
1403 		goto out;
1404 
1405 	netif_device_detach(netdev);
1406 	gelic_net_stop(netdev);
1407 
1408 	gelic_net_open(netdev);
1409 	netif_device_attach(netdev);
1410 
1411 out:
1412 	atomic_dec(&card->tx_timeout_task_counter);
1413 }
1414 
1415 /**
1416  * gelic_net_tx_timeout - called when the tx timeout watchdog kicks in.
1417  * @netdev: interface device structure
1418  *
1419  * called, if tx hangs. Schedules a task that resets the interface
1420  */
1421 void gelic_net_tx_timeout(struct net_device *netdev)
1422 {
1423 	struct gelic_card *card;
1424 
1425 	card = netdev_card(netdev);
1426 	atomic_inc(&card->tx_timeout_task_counter);
1427 	if (netdev->flags & IFF_UP)
1428 		schedule_work(&card->tx_timeout_task);
1429 	else
1430 		atomic_dec(&card->tx_timeout_task_counter);
1431 }
1432 
1433 static const struct net_device_ops gelic_netdevice_ops = {
1434 	.ndo_open = gelic_net_open,
1435 	.ndo_stop = gelic_net_stop,
1436 	.ndo_start_xmit = gelic_net_xmit,
1437 	.ndo_set_rx_mode = gelic_net_set_multi,
1438 	.ndo_tx_timeout = gelic_net_tx_timeout,
1439 	.ndo_set_mac_address = eth_mac_addr,
1440 	.ndo_validate_addr = eth_validate_addr,
1441 #ifdef CONFIG_NET_POLL_CONTROLLER
1442 	.ndo_poll_controller = gelic_net_poll_controller,
1443 #endif
1444 };
1445 
1446 /**
1447  * gelic_ether_setup_netdev_ops - initialization of net_device operations
1448  * @netdev: net_device structure
1449  *
1450  * fills out function pointers in the net_device structure
1451  */
1452 static void gelic_ether_setup_netdev_ops(struct net_device *netdev,
1453 					 struct napi_struct *napi)
1454 {
1455 	netdev->watchdog_timeo = GELIC_NET_WATCHDOG_TIMEOUT;
1456 	/* NAPI */
1457 	netif_napi_add(netdev, napi, gelic_net_poll, NAPI_POLL_WEIGHT);
1458 	netdev->ethtool_ops = &gelic_ether_ethtool_ops;
1459 	netdev->netdev_ops = &gelic_netdevice_ops;
1460 }
1461 
1462 /**
1463  * gelic_ether_setup_netdev - initialization of net_device
1464  * @netdev: net_device structure
1465  * @card: card structure
1466  *
1467  * Returns 0 on success or <0 on failure
1468  *
1469  * gelic_ether_setup_netdev initializes the net_device structure
1470  * and register it.
1471  **/
1472 int gelic_net_setup_netdev(struct net_device *netdev, struct gelic_card *card)
1473 {
1474 	int status;
1475 	u64 v1, v2;
1476 
1477 	netdev->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
1478 
1479 	netdev->features = NETIF_F_IP_CSUM;
1480 	if (GELIC_CARD_RX_CSUM_DEFAULT)
1481 		netdev->features |= NETIF_F_RXCSUM;
1482 
1483 	status = lv1_net_control(bus_id(card), dev_id(card),
1484 				 GELIC_LV1_GET_MAC_ADDRESS,
1485 				 0, 0, 0, &v1, &v2);
1486 	v1 <<= 16;
1487 	if (status || !is_valid_ether_addr((u8 *)&v1)) {
1488 		dev_info(ctodev(card),
1489 			 "%s:lv1_net_control GET_MAC_ADDR failed %d\n",
1490 			 __func__, status);
1491 		return -EINVAL;
1492 	}
1493 	memcpy(netdev->dev_addr, &v1, ETH_ALEN);
1494 
1495 	if (card->vlan_required) {
1496 		netdev->hard_header_len += VLAN_HLEN;
1497 		/*
1498 		 * As vlan is internally used,
1499 		 * we can not receive vlan packets
1500 		 */
1501 		netdev->features |= NETIF_F_VLAN_CHALLENGED;
1502 	}
1503 
1504 	/* MTU range: 64 - 1518 */
1505 	netdev->min_mtu = GELIC_NET_MIN_MTU;
1506 	netdev->max_mtu = GELIC_NET_MAX_MTU;
1507 
1508 	status = register_netdev(netdev);
1509 	if (status) {
1510 		dev_err(ctodev(card), "%s:Couldn't register %s %d\n",
1511 			__func__, netdev->name, status);
1512 		return status;
1513 	}
1514 	dev_info(ctodev(card), "%s: MAC addr %pM\n",
1515 		 netdev->name, netdev->dev_addr);
1516 
1517 	return 0;
1518 }
1519 
1520 /**
1521  * gelic_alloc_card_net - allocates net_device and card structure
1522  *
1523  * returns the card structure or NULL in case of errors
1524  *
1525  * the card and net_device structures are linked to each other
1526  */
1527 #define GELIC_ALIGN (32)
1528 static struct gelic_card *gelic_alloc_card_net(struct net_device **netdev)
1529 {
1530 	struct gelic_card *card;
1531 	struct gelic_port *port;
1532 	void *p;
1533 	size_t alloc_size;
1534 	/*
1535 	 * gelic requires dma descriptor is 32 bytes aligned and
1536 	 * the hypervisor requires irq_status is 8 bytes aligned.
1537 	 */
1538 	BUILD_BUG_ON(offsetof(struct gelic_card, irq_status) % 8);
1539 	BUILD_BUG_ON(offsetof(struct gelic_card, descr) % 32);
1540 	alloc_size =
1541 		sizeof(struct gelic_card) +
1542 		sizeof(struct gelic_descr) * GELIC_NET_RX_DESCRIPTORS +
1543 		sizeof(struct gelic_descr) * GELIC_NET_TX_DESCRIPTORS +
1544 		GELIC_ALIGN - 1;
1545 
1546 	p  = kzalloc(alloc_size, GFP_KERNEL);
1547 	if (!p)
1548 		return NULL;
1549 	card = PTR_ALIGN(p, GELIC_ALIGN);
1550 	card->unalign = p;
1551 
1552 	/*
1553 	 * alloc netdev
1554 	 */
1555 	*netdev = alloc_etherdev(sizeof(struct gelic_port));
1556 	if (!*netdev) {
1557 		kfree(card->unalign);
1558 		return NULL;
1559 	}
1560 	port = netdev_priv(*netdev);
1561 
1562 	/* gelic_port */
1563 	port->netdev = *netdev;
1564 	port->card = card;
1565 	port->type = GELIC_PORT_ETHERNET_0;
1566 
1567 	/* gelic_card */
1568 	card->netdev[GELIC_PORT_ETHERNET_0] = *netdev;
1569 
1570 	INIT_WORK(&card->tx_timeout_task, gelic_net_tx_timeout_task);
1571 	init_waitqueue_head(&card->waitq);
1572 	atomic_set(&card->tx_timeout_task_counter, 0);
1573 	mutex_init(&card->updown_lock);
1574 	atomic_set(&card->users, 0);
1575 
1576 	return card;
1577 }
1578 
1579 static void gelic_card_get_vlan_info(struct gelic_card *card)
1580 {
1581 	u64 v1, v2;
1582 	int status;
1583 	unsigned int i;
1584 	struct {
1585 		int tx;
1586 		int rx;
1587 	} vlan_id_ix[2] = {
1588 		[GELIC_PORT_ETHERNET_0] = {
1589 			.tx = GELIC_LV1_VLAN_TX_ETHERNET_0,
1590 			.rx = GELIC_LV1_VLAN_RX_ETHERNET_0
1591 		},
1592 		[GELIC_PORT_WIRELESS] = {
1593 			.tx = GELIC_LV1_VLAN_TX_WIRELESS,
1594 			.rx = GELIC_LV1_VLAN_RX_WIRELESS
1595 		}
1596 	};
1597 
1598 	for (i = 0; i < ARRAY_SIZE(vlan_id_ix); i++) {
1599 		/* tx tag */
1600 		status = lv1_net_control(bus_id(card), dev_id(card),
1601 					 GELIC_LV1_GET_VLAN_ID,
1602 					 vlan_id_ix[i].tx,
1603 					 0, 0, &v1, &v2);
1604 		if (status || !v1) {
1605 			if (status != LV1_NO_ENTRY)
1606 				dev_dbg(ctodev(card),
1607 					"get vlan id for tx(%d) failed(%d)\n",
1608 					vlan_id_ix[i].tx, status);
1609 			card->vlan[i].tx = 0;
1610 			card->vlan[i].rx = 0;
1611 			continue;
1612 		}
1613 		card->vlan[i].tx = (u16)v1;
1614 
1615 		/* rx tag */
1616 		status = lv1_net_control(bus_id(card), dev_id(card),
1617 					 GELIC_LV1_GET_VLAN_ID,
1618 					 vlan_id_ix[i].rx,
1619 					 0, 0, &v1, &v2);
1620 		if (status || !v1) {
1621 			if (status != LV1_NO_ENTRY)
1622 				dev_info(ctodev(card),
1623 					 "get vlan id for rx(%d) failed(%d)\n",
1624 					 vlan_id_ix[i].rx, status);
1625 			card->vlan[i].tx = 0;
1626 			card->vlan[i].rx = 0;
1627 			continue;
1628 		}
1629 		card->vlan[i].rx = (u16)v1;
1630 
1631 		dev_dbg(ctodev(card), "vlan_id[%d] tx=%02x rx=%02x\n",
1632 			i, card->vlan[i].tx, card->vlan[i].rx);
1633 	}
1634 
1635 	if (card->vlan[GELIC_PORT_ETHERNET_0].tx) {
1636 		BUG_ON(!card->vlan[GELIC_PORT_WIRELESS].tx);
1637 		card->vlan_required = 1;
1638 	} else
1639 		card->vlan_required = 0;
1640 
1641 	/* check wirelss capable firmware */
1642 	if (ps3_compare_firmware_version(1, 6, 0) < 0) {
1643 		card->vlan[GELIC_PORT_WIRELESS].tx = 0;
1644 		card->vlan[GELIC_PORT_WIRELESS].rx = 0;
1645 	}
1646 
1647 	dev_info(ctodev(card), "internal vlan %s\n",
1648 		 card->vlan_required? "enabled" : "disabled");
1649 }
1650 /**
1651  * ps3_gelic_driver_probe - add a device to the control of this driver
1652  */
1653 static int ps3_gelic_driver_probe(struct ps3_system_bus_device *dev)
1654 {
1655 	struct gelic_card *card;
1656 	struct net_device *netdev;
1657 	int result;
1658 
1659 	pr_debug("%s: called\n", __func__);
1660 
1661 	udbg_shutdown_ps3gelic();
1662 
1663 	result = ps3_open_hv_device(dev);
1664 
1665 	if (result) {
1666 		dev_dbg(&dev->core, "%s:ps3_open_hv_device failed\n",
1667 			__func__);
1668 		goto fail_open;
1669 	}
1670 
1671 	result = ps3_dma_region_create(dev->d_region);
1672 
1673 	if (result) {
1674 		dev_dbg(&dev->core, "%s:ps3_dma_region_create failed(%d)\n",
1675 			__func__, result);
1676 		BUG_ON("check region type");
1677 		goto fail_dma_region;
1678 	}
1679 
1680 	/* alloc card/netdevice */
1681 	card = gelic_alloc_card_net(&netdev);
1682 	if (!card) {
1683 		dev_info(&dev->core, "%s:gelic_net_alloc_card failed\n",
1684 			 __func__);
1685 		result = -ENOMEM;
1686 		goto fail_alloc_card;
1687 	}
1688 	ps3_system_bus_set_drvdata(dev, card);
1689 	card->dev = dev;
1690 
1691 	/* get internal vlan info */
1692 	gelic_card_get_vlan_info(card);
1693 
1694 	card->link_mode = GELIC_LV1_ETHER_AUTO_NEG;
1695 
1696 	/* setup interrupt */
1697 	result = lv1_net_set_interrupt_status_indicator(bus_id(card),
1698 							dev_id(card),
1699 		ps3_mm_phys_to_lpar(__pa(&card->irq_status)),
1700 		0);
1701 
1702 	if (result) {
1703 		dev_dbg(&dev->core,
1704 			"%s:set_interrupt_status_indicator failed: %s\n",
1705 			__func__, ps3_result(result));
1706 		result = -EIO;
1707 		goto fail_status_indicator;
1708 	}
1709 
1710 	result = ps3_sb_event_receive_port_setup(dev, PS3_BINDING_CPU_ANY,
1711 		&card->irq);
1712 
1713 	if (result) {
1714 		dev_info(ctodev(card),
1715 			 "%s:gelic_net_open_device failed (%d)\n",
1716 			 __func__, result);
1717 		result = -EPERM;
1718 		goto fail_alloc_irq;
1719 	}
1720 	result = request_irq(card->irq, gelic_card_interrupt,
1721 			     0, netdev->name, card);
1722 
1723 	if (result) {
1724 		dev_info(ctodev(card), "%s:request_irq failed (%d)\n",
1725 			__func__, result);
1726 		goto fail_request_irq;
1727 	}
1728 
1729 	/* setup card structure */
1730 	card->irq_mask = GELIC_CARD_RXINT | GELIC_CARD_TXINT |
1731 		GELIC_CARD_PORT_STATUS_CHANGED;
1732 
1733 
1734 	result = gelic_card_init_chain(card, &card->tx_chain,
1735 				       card->descr, GELIC_NET_TX_DESCRIPTORS);
1736 	if (result)
1737 		goto fail_alloc_tx;
1738 	result = gelic_card_init_chain(card, &card->rx_chain,
1739 				       card->descr + GELIC_NET_TX_DESCRIPTORS,
1740 				       GELIC_NET_RX_DESCRIPTORS);
1741 	if (result)
1742 		goto fail_alloc_rx;
1743 
1744 	/* head of chain */
1745 	card->tx_top = card->tx_chain.head;
1746 	card->rx_top = card->rx_chain.head;
1747 	dev_dbg(ctodev(card), "descr rx %p, tx %p, size %#lx, num %#x\n",
1748 		card->rx_top, card->tx_top, sizeof(struct gelic_descr),
1749 		GELIC_NET_RX_DESCRIPTORS);
1750 	/* allocate rx skbs */
1751 	result = gelic_card_alloc_rx_skbs(card);
1752 	if (result)
1753 		goto fail_alloc_skbs;
1754 
1755 	spin_lock_init(&card->tx_lock);
1756 	card->tx_dma_progress = 0;
1757 
1758 	/* setup net_device structure */
1759 	netdev->irq = card->irq;
1760 	SET_NETDEV_DEV(netdev, &card->dev->core);
1761 	gelic_ether_setup_netdev_ops(netdev, &card->napi);
1762 	result = gelic_net_setup_netdev(netdev, card);
1763 	if (result) {
1764 		dev_dbg(&dev->core, "%s: setup_netdev failed %d\n",
1765 			__func__, result);
1766 		goto fail_setup_netdev;
1767 	}
1768 
1769 #ifdef CONFIG_GELIC_WIRELESS
1770 	result = gelic_wl_driver_probe(card);
1771 	if (result) {
1772 		dev_dbg(&dev->core, "%s: WL init failed\n", __func__);
1773 		goto fail_setup_netdev;
1774 	}
1775 #endif
1776 	pr_debug("%s: done\n", __func__);
1777 	return 0;
1778 
1779 fail_setup_netdev:
1780 fail_alloc_skbs:
1781 	gelic_card_free_chain(card, card->rx_chain.head);
1782 fail_alloc_rx:
1783 	gelic_card_free_chain(card, card->tx_chain.head);
1784 fail_alloc_tx:
1785 	free_irq(card->irq, card);
1786 	netdev->irq = 0;
1787 fail_request_irq:
1788 	ps3_sb_event_receive_port_destroy(dev, card->irq);
1789 fail_alloc_irq:
1790 	lv1_net_set_interrupt_status_indicator(bus_id(card),
1791 					       bus_id(card),
1792 					       0, 0);
1793 fail_status_indicator:
1794 	ps3_system_bus_set_drvdata(dev, NULL);
1795 	kfree(netdev_card(netdev)->unalign);
1796 	free_netdev(netdev);
1797 fail_alloc_card:
1798 	ps3_dma_region_free(dev->d_region);
1799 fail_dma_region:
1800 	ps3_close_hv_device(dev);
1801 fail_open:
1802 	return result;
1803 }
1804 
1805 /**
1806  * ps3_gelic_driver_remove - remove a device from the control of this driver
1807  */
1808 
1809 static int ps3_gelic_driver_remove(struct ps3_system_bus_device *dev)
1810 {
1811 	struct gelic_card *card = ps3_system_bus_get_drvdata(dev);
1812 	struct net_device *netdev0;
1813 	pr_debug("%s: called\n", __func__);
1814 
1815 	/* set auto-negotiation */
1816 	gelic_card_set_link_mode(card, GELIC_LV1_ETHER_AUTO_NEG);
1817 
1818 #ifdef CONFIG_GELIC_WIRELESS
1819 	gelic_wl_driver_remove(card);
1820 #endif
1821 	/* stop interrupt */
1822 	gelic_card_set_irq_mask(card, 0);
1823 
1824 	/* turn off DMA, force end */
1825 	gelic_card_disable_rxdmac(card);
1826 	gelic_card_disable_txdmac(card);
1827 
1828 	/* release chains */
1829 	gelic_card_release_tx_chain(card, 1);
1830 	gelic_card_release_rx_chain(card);
1831 
1832 	gelic_card_free_chain(card, card->tx_top);
1833 	gelic_card_free_chain(card, card->rx_top);
1834 
1835 	netdev0 = card->netdev[GELIC_PORT_ETHERNET_0];
1836 	/* disconnect event port */
1837 	free_irq(card->irq, card);
1838 	netdev0->irq = 0;
1839 	ps3_sb_event_receive_port_destroy(card->dev, card->irq);
1840 
1841 	wait_event(card->waitq,
1842 		   atomic_read(&card->tx_timeout_task_counter) == 0);
1843 
1844 	lv1_net_set_interrupt_status_indicator(bus_id(card), dev_id(card),
1845 					       0 , 0);
1846 
1847 	unregister_netdev(netdev0);
1848 	kfree(netdev_card(netdev0)->unalign);
1849 	free_netdev(netdev0);
1850 
1851 	ps3_system_bus_set_drvdata(dev, NULL);
1852 
1853 	ps3_dma_region_free(dev->d_region);
1854 
1855 	ps3_close_hv_device(dev);
1856 
1857 	pr_debug("%s: done\n", __func__);
1858 	return 0;
1859 }
1860 
1861 static struct ps3_system_bus_driver ps3_gelic_driver = {
1862 	.match_id = PS3_MATCH_ID_GELIC,
1863 	.probe = ps3_gelic_driver_probe,
1864 	.remove = ps3_gelic_driver_remove,
1865 	.shutdown = ps3_gelic_driver_remove,
1866 	.core.name = "ps3_gelic_driver",
1867 	.core.owner = THIS_MODULE,
1868 };
1869 
1870 static int __init ps3_gelic_driver_init (void)
1871 {
1872 	return firmware_has_feature(FW_FEATURE_PS3_LV1)
1873 		? ps3_system_bus_driver_register(&ps3_gelic_driver)
1874 		: -ENODEV;
1875 }
1876 
1877 static void __exit ps3_gelic_driver_exit (void)
1878 {
1879 	ps3_system_bus_driver_unregister(&ps3_gelic_driver);
1880 }
1881 
1882 module_init(ps3_gelic_driver_init);
1883 module_exit(ps3_gelic_driver_exit);
1884 
1885 MODULE_ALIAS(PS3_MODULE_ALIAS_GELIC);
1886 
1887