1 /******************************************************************************* 2 * 3 * Linux ThunderLAN Driver 4 * 5 * tlan.c 6 * by James Banks 7 * 8 * (C) 1997-1998 Caldera, Inc. 9 * (C) 1998 James Banks 10 * (C) 1999-2001 Torben Mathiasen 11 * (C) 2002 Samuel Chessman 12 * 13 * This software may be used and distributed according to the terms 14 * of the GNU General Public License, incorporated herein by reference. 15 * 16 ** Useful (if not required) reading: 17 * 18 * Texas Instruments, ThunderLAN Programmer's Guide, 19 * TI Literature Number SPWU013A 20 * available in PDF format from www.ti.com 21 * Level One, LXT901 and LXT970 Data Sheets 22 * available in PDF format from www.level1.com 23 * National Semiconductor, DP83840A Data Sheet 24 * available in PDF format from www.national.com 25 * Microchip Technology, 24C01A/02A/04A Data Sheet 26 * available in PDF format from www.microchip.com 27 * 28 ******************************************************************************/ 29 30 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 31 32 #include <linux/hardirq.h> 33 #include <linux/module.h> 34 #include <linux/init.h> 35 #include <linux/interrupt.h> 36 #include <linux/ioport.h> 37 #include <linux/eisa.h> 38 #include <linux/pci.h> 39 #include <linux/dma-mapping.h> 40 #include <linux/netdevice.h> 41 #include <linux/etherdevice.h> 42 #include <linux/delay.h> 43 #include <linux/spinlock.h> 44 #include <linux/workqueue.h> 45 #include <linux/mii.h> 46 47 #include "tlan.h" 48 49 50 /* For removing EISA devices */ 51 static struct net_device *tlan_eisa_devices; 52 53 static int tlan_devices_installed; 54 55 /* Set speed, duplex and aui settings */ 56 static int aui[MAX_TLAN_BOARDS]; 57 static int duplex[MAX_TLAN_BOARDS]; 58 static int speed[MAX_TLAN_BOARDS]; 59 static int boards_found; 60 module_param_array(aui, int, NULL, 0); 61 module_param_array(duplex, int, NULL, 0); 62 module_param_array(speed, int, NULL, 0); 63 MODULE_PARM_DESC(aui, "ThunderLAN use AUI port(s) (0-1)"); 64 MODULE_PARM_DESC(duplex, 65 "ThunderLAN duplex setting(s) (0-default, 1-half, 2-full)"); 66 MODULE_PARM_DESC(speed, "ThunderLAN port speed setting(s) (0,10,100)"); 67 68 MODULE_AUTHOR("Maintainer: Samuel Chessman <chessman@tux.org>"); 69 MODULE_DESCRIPTION("Driver for TI ThunderLAN based ethernet PCI adapters"); 70 MODULE_LICENSE("GPL"); 71 72 /* Turn on debugging. See Documentation/networking/tlan.txt for details */ 73 static int debug; 74 module_param(debug, int, 0); 75 MODULE_PARM_DESC(debug, "ThunderLAN debug mask"); 76 77 static const char tlan_signature[] = "TLAN"; 78 static const char tlan_banner[] = "ThunderLAN driver v1.17\n"; 79 static int tlan_have_pci; 80 static int tlan_have_eisa; 81 82 static const char * const media[] = { 83 "10BaseT-HD", "10BaseT-FD", "100baseTx-HD", 84 "100BaseTx-FD", "100BaseT4", NULL 85 }; 86 87 static struct board { 88 const char *device_label; 89 u32 flags; 90 u16 addr_ofs; 91 } board_info[] = { 92 { "Compaq Netelligent 10 T PCI UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 }, 93 { "Compaq Netelligent 10/100 TX PCI UTP", 94 TLAN_ADAPTER_ACTIVITY_LED, 0x83 }, 95 { "Compaq Integrated NetFlex-3/P", TLAN_ADAPTER_NONE, 0x83 }, 96 { "Compaq NetFlex-3/P", 97 TLAN_ADAPTER_UNMANAGED_PHY | TLAN_ADAPTER_BIT_RATE_PHY, 0x83 }, 98 { "Compaq NetFlex-3/P", TLAN_ADAPTER_NONE, 0x83 }, 99 { "Compaq Netelligent Integrated 10/100 TX UTP", 100 TLAN_ADAPTER_ACTIVITY_LED, 0x83 }, 101 { "Compaq Netelligent Dual 10/100 TX PCI UTP", 102 TLAN_ADAPTER_NONE, 0x83 }, 103 { "Compaq Netelligent 10/100 TX Embedded UTP", 104 TLAN_ADAPTER_NONE, 0x83 }, 105 { "Olicom OC-2183/2185", TLAN_ADAPTER_USE_INTERN_10, 0x83 }, 106 { "Olicom OC-2325", TLAN_ADAPTER_ACTIVITY_LED | 107 TLAN_ADAPTER_UNMANAGED_PHY, 0xf8 }, 108 { "Olicom OC-2326", TLAN_ADAPTER_ACTIVITY_LED | 109 TLAN_ADAPTER_USE_INTERN_10, 0xf8 }, 110 { "Compaq Netelligent 10/100 TX UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 }, 111 { "Compaq Netelligent 10 T/2 PCI UTP/coax", TLAN_ADAPTER_NONE, 0x83 }, 112 { "Compaq NetFlex-3/E", 113 TLAN_ADAPTER_ACTIVITY_LED | /* EISA card */ 114 TLAN_ADAPTER_UNMANAGED_PHY | TLAN_ADAPTER_BIT_RATE_PHY, 0x83 }, 115 { "Compaq NetFlex-3/E", 116 TLAN_ADAPTER_ACTIVITY_LED, 0x83 }, /* EISA card */ 117 }; 118 119 static const struct pci_device_id tlan_pci_tbl[] = { 120 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL10, 121 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, 122 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100, 123 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, 124 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETFLEX3I, 125 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 }, 126 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_THUNDER, 127 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 }, 128 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETFLEX3B, 129 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, 130 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100PI, 131 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5 }, 132 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100D, 133 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6 }, 134 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100I, 135 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 7 }, 136 { PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2183, 137 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 }, 138 { PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2325, 139 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 9 }, 140 { PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2326, 141 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 10 }, 142 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_NETELLIGENT_10_100_WS_5100, 143 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 11 }, 144 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_NETELLIGENT_10_T2, 145 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12 }, 146 { 0,} 147 }; 148 MODULE_DEVICE_TABLE(pci, tlan_pci_tbl); 149 150 static void tlan_eisa_probe(void); 151 static void tlan_eisa_cleanup(void); 152 static int tlan_init(struct net_device *); 153 static int tlan_open(struct net_device *dev); 154 static netdev_tx_t tlan_start_tx(struct sk_buff *, struct net_device *); 155 static irqreturn_t tlan_handle_interrupt(int, void *); 156 static int tlan_close(struct net_device *); 157 static struct net_device_stats *tlan_get_stats(struct net_device *); 158 static void tlan_set_multicast_list(struct net_device *); 159 static int tlan_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); 160 static int tlan_probe1(struct pci_dev *pdev, long ioaddr, 161 int irq, int rev, const struct pci_device_id *ent); 162 static void tlan_tx_timeout(struct net_device *dev); 163 static void tlan_tx_timeout_work(struct work_struct *work); 164 static int tlan_init_one(struct pci_dev *pdev, 165 const struct pci_device_id *ent); 166 167 static u32 tlan_handle_tx_eof(struct net_device *, u16); 168 static u32 tlan_handle_stat_overflow(struct net_device *, u16); 169 static u32 tlan_handle_rx_eof(struct net_device *, u16); 170 static u32 tlan_handle_dummy(struct net_device *, u16); 171 static u32 tlan_handle_tx_eoc(struct net_device *, u16); 172 static u32 tlan_handle_status_check(struct net_device *, u16); 173 static u32 tlan_handle_rx_eoc(struct net_device *, u16); 174 175 static void tlan_timer(struct timer_list *t); 176 static void tlan_phy_monitor(struct timer_list *t); 177 178 static void tlan_reset_lists(struct net_device *); 179 static void tlan_free_lists(struct net_device *); 180 static void tlan_print_dio(u16); 181 static void tlan_print_list(struct tlan_list *, char *, int); 182 static void tlan_read_and_clear_stats(struct net_device *, int); 183 static void tlan_reset_adapter(struct net_device *); 184 static void tlan_finish_reset(struct net_device *); 185 static void tlan_set_mac(struct net_device *, int areg, char *mac); 186 187 static void tlan_phy_print(struct net_device *); 188 static void tlan_phy_detect(struct net_device *); 189 static void tlan_phy_power_down(struct net_device *); 190 static void tlan_phy_power_up(struct net_device *); 191 static void tlan_phy_reset(struct net_device *); 192 static void tlan_phy_start_link(struct net_device *); 193 static void tlan_phy_finish_auto_neg(struct net_device *); 194 195 /* 196 static int tlan_phy_nop(struct net_device *); 197 static int tlan_phy_internal_check(struct net_device *); 198 static int tlan_phy_internal_service(struct net_device *); 199 static int tlan_phy_dp83840a_check(struct net_device *); 200 */ 201 202 static bool tlan_mii_read_reg(struct net_device *, u16, u16, u16 *); 203 static void tlan_mii_send_data(u16, u32, unsigned); 204 static void tlan_mii_sync(u16); 205 static void tlan_mii_write_reg(struct net_device *, u16, u16, u16); 206 207 static void tlan_ee_send_start(u16); 208 static int tlan_ee_send_byte(u16, u8, int); 209 static void tlan_ee_receive_byte(u16, u8 *, int); 210 static int tlan_ee_read_byte(struct net_device *, u8, u8 *); 211 212 213 static inline void 214 tlan_store_skb(struct tlan_list *tag, struct sk_buff *skb) 215 { 216 unsigned long addr = (unsigned long)skb; 217 tag->buffer[9].address = addr; 218 tag->buffer[8].address = upper_32_bits(addr); 219 } 220 221 static inline struct sk_buff * 222 tlan_get_skb(const struct tlan_list *tag) 223 { 224 unsigned long addr; 225 226 addr = tag->buffer[9].address; 227 addr |= ((unsigned long) tag->buffer[8].address << 16) << 16; 228 return (struct sk_buff *) addr; 229 } 230 231 static u32 232 (*tlan_int_vector[TLAN_INT_NUMBER_OF_INTS])(struct net_device *, u16) = { 233 NULL, 234 tlan_handle_tx_eof, 235 tlan_handle_stat_overflow, 236 tlan_handle_rx_eof, 237 tlan_handle_dummy, 238 tlan_handle_tx_eoc, 239 tlan_handle_status_check, 240 tlan_handle_rx_eoc 241 }; 242 243 static inline void 244 tlan_set_timer(struct net_device *dev, u32 ticks, u32 type) 245 { 246 struct tlan_priv *priv = netdev_priv(dev); 247 unsigned long flags = 0; 248 249 if (!in_irq()) 250 spin_lock_irqsave(&priv->lock, flags); 251 if (priv->timer.function != NULL && 252 priv->timer_type != TLAN_TIMER_ACTIVITY) { 253 if (!in_irq()) 254 spin_unlock_irqrestore(&priv->lock, flags); 255 return; 256 } 257 priv->timer.function = tlan_timer; 258 if (!in_irq()) 259 spin_unlock_irqrestore(&priv->lock, flags); 260 261 priv->timer_set_at = jiffies; 262 priv->timer_type = type; 263 mod_timer(&priv->timer, jiffies + ticks); 264 265 } 266 267 268 /***************************************************************************** 269 ****************************************************************************** 270 271 ThunderLAN driver primary functions 272 273 these functions are more or less common to all linux network drivers. 274 275 ****************************************************************************** 276 *****************************************************************************/ 277 278 279 280 281 282 /*************************************************************** 283 * tlan_remove_one 284 * 285 * Returns: 286 * Nothing 287 * Parms: 288 * None 289 * 290 * Goes through the TLanDevices list and frees the device 291 * structs and memory associated with each device (lists 292 * and buffers). It also ureserves the IO port regions 293 * associated with this device. 294 * 295 **************************************************************/ 296 297 298 static void tlan_remove_one(struct pci_dev *pdev) 299 { 300 struct net_device *dev = pci_get_drvdata(pdev); 301 struct tlan_priv *priv = netdev_priv(dev); 302 303 unregister_netdev(dev); 304 305 if (priv->dma_storage) { 306 pci_free_consistent(priv->pci_dev, 307 priv->dma_size, priv->dma_storage, 308 priv->dma_storage_dma); 309 } 310 311 #ifdef CONFIG_PCI 312 pci_release_regions(pdev); 313 #endif 314 315 free_netdev(dev); 316 317 cancel_work_sync(&priv->tlan_tqueue); 318 } 319 320 static void tlan_start(struct net_device *dev) 321 { 322 tlan_reset_lists(dev); 323 /* NOTE: It might not be necessary to read the stats before a 324 reset if you don't care what the values are. 325 */ 326 tlan_read_and_clear_stats(dev, TLAN_IGNORE); 327 tlan_reset_adapter(dev); 328 netif_wake_queue(dev); 329 } 330 331 static void tlan_stop(struct net_device *dev) 332 { 333 struct tlan_priv *priv = netdev_priv(dev); 334 335 del_timer_sync(&priv->media_timer); 336 tlan_read_and_clear_stats(dev, TLAN_RECORD); 337 outl(TLAN_HC_AD_RST, dev->base_addr + TLAN_HOST_CMD); 338 /* Reset and power down phy */ 339 tlan_reset_adapter(dev); 340 if (priv->timer.function != NULL) { 341 del_timer_sync(&priv->timer); 342 priv->timer.function = NULL; 343 } 344 } 345 346 #ifdef CONFIG_PM 347 348 static int tlan_suspend(struct pci_dev *pdev, pm_message_t state) 349 { 350 struct net_device *dev = pci_get_drvdata(pdev); 351 352 if (netif_running(dev)) 353 tlan_stop(dev); 354 355 netif_device_detach(dev); 356 pci_save_state(pdev); 357 pci_disable_device(pdev); 358 pci_wake_from_d3(pdev, false); 359 pci_set_power_state(pdev, PCI_D3hot); 360 361 return 0; 362 } 363 364 static int tlan_resume(struct pci_dev *pdev) 365 { 366 struct net_device *dev = pci_get_drvdata(pdev); 367 int rc = pci_enable_device(pdev); 368 369 if (rc) 370 return rc; 371 pci_restore_state(pdev); 372 pci_enable_wake(pdev, PCI_D0, 0); 373 netif_device_attach(dev); 374 375 if (netif_running(dev)) 376 tlan_start(dev); 377 378 return 0; 379 } 380 381 #else /* CONFIG_PM */ 382 383 #define tlan_suspend NULL 384 #define tlan_resume NULL 385 386 #endif /* CONFIG_PM */ 387 388 389 static struct pci_driver tlan_driver = { 390 .name = "tlan", 391 .id_table = tlan_pci_tbl, 392 .probe = tlan_init_one, 393 .remove = tlan_remove_one, 394 .suspend = tlan_suspend, 395 .resume = tlan_resume, 396 }; 397 398 static int __init tlan_probe(void) 399 { 400 int rc = -ENODEV; 401 402 pr_info("%s", tlan_banner); 403 404 TLAN_DBG(TLAN_DEBUG_PROBE, "Starting PCI Probe....\n"); 405 406 /* Use new style PCI probing. Now the kernel will 407 do most of this for us */ 408 rc = pci_register_driver(&tlan_driver); 409 410 if (rc != 0) { 411 pr_err("Could not register pci driver\n"); 412 goto err_out_pci_free; 413 } 414 415 TLAN_DBG(TLAN_DEBUG_PROBE, "Starting EISA Probe....\n"); 416 tlan_eisa_probe(); 417 418 pr_info("%d device%s installed, PCI: %d EISA: %d\n", 419 tlan_devices_installed, tlan_devices_installed == 1 ? "" : "s", 420 tlan_have_pci, tlan_have_eisa); 421 422 if (tlan_devices_installed == 0) { 423 rc = -ENODEV; 424 goto err_out_pci_unreg; 425 } 426 return 0; 427 428 err_out_pci_unreg: 429 pci_unregister_driver(&tlan_driver); 430 err_out_pci_free: 431 return rc; 432 } 433 434 435 static int tlan_init_one(struct pci_dev *pdev, 436 const struct pci_device_id *ent) 437 { 438 return tlan_probe1(pdev, -1, -1, 0, ent); 439 } 440 441 442 /* 443 *************************************************************** 444 * tlan_probe1 445 * 446 * Returns: 447 * 0 on success, error code on error 448 * Parms: 449 * none 450 * 451 * The name is lower case to fit in with all the rest of 452 * the netcard_probe names. This function looks for 453 * another TLan based adapter, setting it up with the 454 * allocated device struct if one is found. 455 * tlan_probe has been ported to the new net API and 456 * now allocates its own device structure. This function 457 * is also used by modules. 458 * 459 **************************************************************/ 460 461 static int tlan_probe1(struct pci_dev *pdev, long ioaddr, int irq, int rev, 462 const struct pci_device_id *ent) 463 { 464 465 struct net_device *dev; 466 struct tlan_priv *priv; 467 u16 device_id; 468 int reg, rc = -ENODEV; 469 470 #ifdef CONFIG_PCI 471 if (pdev) { 472 rc = pci_enable_device(pdev); 473 if (rc) 474 return rc; 475 476 rc = pci_request_regions(pdev, tlan_signature); 477 if (rc) { 478 pr_err("Could not reserve IO regions\n"); 479 goto err_out; 480 } 481 } 482 #endif /* CONFIG_PCI */ 483 484 dev = alloc_etherdev(sizeof(struct tlan_priv)); 485 if (dev == NULL) { 486 rc = -ENOMEM; 487 goto err_out_regions; 488 } 489 SET_NETDEV_DEV(dev, &pdev->dev); 490 491 priv = netdev_priv(dev); 492 493 priv->pci_dev = pdev; 494 priv->dev = dev; 495 496 /* Is this a PCI device? */ 497 if (pdev) { 498 u32 pci_io_base = 0; 499 500 priv->adapter = &board_info[ent->driver_data]; 501 502 rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); 503 if (rc) { 504 pr_err("No suitable PCI mapping available\n"); 505 goto err_out_free_dev; 506 } 507 508 for (reg = 0; reg <= 5; reg++) { 509 if (pci_resource_flags(pdev, reg) & IORESOURCE_IO) { 510 pci_io_base = pci_resource_start(pdev, reg); 511 TLAN_DBG(TLAN_DEBUG_GNRL, 512 "IO mapping is available at %x.\n", 513 pci_io_base); 514 break; 515 } 516 } 517 if (!pci_io_base) { 518 pr_err("No IO mappings available\n"); 519 rc = -EIO; 520 goto err_out_free_dev; 521 } 522 523 dev->base_addr = pci_io_base; 524 dev->irq = pdev->irq; 525 priv->adapter_rev = pdev->revision; 526 pci_set_master(pdev); 527 pci_set_drvdata(pdev, dev); 528 529 } else { /* EISA card */ 530 /* This is a hack. We need to know which board structure 531 * is suited for this adapter */ 532 device_id = inw(ioaddr + EISA_ID2); 533 if (device_id == 0x20F1) { 534 priv->adapter = &board_info[13]; /* NetFlex-3/E */ 535 priv->adapter_rev = 23; /* TLAN 2.3 */ 536 } else { 537 priv->adapter = &board_info[14]; 538 priv->adapter_rev = 10; /* TLAN 1.0 */ 539 } 540 dev->base_addr = ioaddr; 541 dev->irq = irq; 542 } 543 544 /* Kernel parameters */ 545 if (dev->mem_start) { 546 priv->aui = dev->mem_start & 0x01; 547 priv->duplex = ((dev->mem_start & 0x06) == 0x06) ? 0 548 : (dev->mem_start & 0x06) >> 1; 549 priv->speed = ((dev->mem_start & 0x18) == 0x18) ? 0 550 : (dev->mem_start & 0x18) >> 3; 551 552 if (priv->speed == 0x1) 553 priv->speed = TLAN_SPEED_10; 554 else if (priv->speed == 0x2) 555 priv->speed = TLAN_SPEED_100; 556 557 debug = priv->debug = dev->mem_end; 558 } else { 559 priv->aui = aui[boards_found]; 560 priv->speed = speed[boards_found]; 561 priv->duplex = duplex[boards_found]; 562 priv->debug = debug; 563 } 564 565 /* This will be used when we get an adapter error from 566 * within our irq handler */ 567 INIT_WORK(&priv->tlan_tqueue, tlan_tx_timeout_work); 568 569 spin_lock_init(&priv->lock); 570 571 rc = tlan_init(dev); 572 if (rc) { 573 pr_err("Could not set up device\n"); 574 goto err_out_free_dev; 575 } 576 577 rc = register_netdev(dev); 578 if (rc) { 579 pr_err("Could not register device\n"); 580 goto err_out_uninit; 581 } 582 583 584 tlan_devices_installed++; 585 boards_found++; 586 587 /* pdev is NULL if this is an EISA device */ 588 if (pdev) 589 tlan_have_pci++; 590 else { 591 priv->next_device = tlan_eisa_devices; 592 tlan_eisa_devices = dev; 593 tlan_have_eisa++; 594 } 595 596 netdev_info(dev, "irq=%2d, io=%04x, %s, Rev. %d\n", 597 (int)dev->irq, 598 (int)dev->base_addr, 599 priv->adapter->device_label, 600 priv->adapter_rev); 601 return 0; 602 603 err_out_uninit: 604 pci_free_consistent(priv->pci_dev, priv->dma_size, priv->dma_storage, 605 priv->dma_storage_dma); 606 err_out_free_dev: 607 free_netdev(dev); 608 err_out_regions: 609 #ifdef CONFIG_PCI 610 if (pdev) 611 pci_release_regions(pdev); 612 err_out: 613 #endif 614 if (pdev) 615 pci_disable_device(pdev); 616 return rc; 617 } 618 619 620 static void tlan_eisa_cleanup(void) 621 { 622 struct net_device *dev; 623 struct tlan_priv *priv; 624 625 while (tlan_have_eisa) { 626 dev = tlan_eisa_devices; 627 priv = netdev_priv(dev); 628 if (priv->dma_storage) { 629 pci_free_consistent(priv->pci_dev, priv->dma_size, 630 priv->dma_storage, 631 priv->dma_storage_dma); 632 } 633 release_region(dev->base_addr, 0x10); 634 unregister_netdev(dev); 635 tlan_eisa_devices = priv->next_device; 636 free_netdev(dev); 637 tlan_have_eisa--; 638 } 639 } 640 641 642 static void __exit tlan_exit(void) 643 { 644 pci_unregister_driver(&tlan_driver); 645 646 if (tlan_have_eisa) 647 tlan_eisa_cleanup(); 648 649 } 650 651 652 /* Module loading/unloading */ 653 module_init(tlan_probe); 654 module_exit(tlan_exit); 655 656 657 658 /************************************************************** 659 * tlan_eisa_probe 660 * 661 * Returns: 0 on success, 1 otherwise 662 * 663 * Parms: None 664 * 665 * 666 * This functions probes for EISA devices and calls 667 * TLan_probe1 when one is found. 668 * 669 *************************************************************/ 670 671 static void __init tlan_eisa_probe(void) 672 { 673 long ioaddr; 674 int rc = -ENODEV; 675 int irq; 676 u16 device_id; 677 678 if (!EISA_bus) { 679 TLAN_DBG(TLAN_DEBUG_PROBE, "No EISA bus present\n"); 680 return; 681 } 682 683 /* Loop through all slots of the EISA bus */ 684 for (ioaddr = 0x1000; ioaddr < 0x9000; ioaddr += 0x1000) { 685 686 TLAN_DBG(TLAN_DEBUG_PROBE, "EISA_ID 0x%4x: 0x%4x\n", 687 (int) ioaddr + 0xc80, inw(ioaddr + EISA_ID)); 688 TLAN_DBG(TLAN_DEBUG_PROBE, "EISA_ID 0x%4x: 0x%4x\n", 689 (int) ioaddr + 0xc82, inw(ioaddr + EISA_ID2)); 690 691 692 TLAN_DBG(TLAN_DEBUG_PROBE, 693 "Probing for EISA adapter at IO: 0x%4x : ", 694 (int) ioaddr); 695 if (request_region(ioaddr, 0x10, tlan_signature) == NULL) 696 goto out; 697 698 if (inw(ioaddr + EISA_ID) != 0x110E) { 699 release_region(ioaddr, 0x10); 700 goto out; 701 } 702 703 device_id = inw(ioaddr + EISA_ID2); 704 if (device_id != 0x20F1 && device_id != 0x40F1) { 705 release_region(ioaddr, 0x10); 706 goto out; 707 } 708 709 /* check if adapter is enabled */ 710 if (inb(ioaddr + EISA_CR) != 0x1) { 711 release_region(ioaddr, 0x10); 712 goto out2; 713 } 714 715 if (debug == 0x10) 716 pr_info("Found one\n"); 717 718 719 /* Get irq from board */ 720 switch (inb(ioaddr + 0xcc0)) { 721 case(0x10): 722 irq = 5; 723 break; 724 case(0x20): 725 irq = 9; 726 break; 727 case(0x40): 728 irq = 10; 729 break; 730 case(0x80): 731 irq = 11; 732 break; 733 default: 734 goto out; 735 } 736 737 738 /* Setup the newly found eisa adapter */ 739 rc = tlan_probe1(NULL, ioaddr, irq, 740 12, NULL); 741 continue; 742 743 out: 744 if (debug == 0x10) 745 pr_info("None found\n"); 746 continue; 747 748 out2: 749 if (debug == 0x10) 750 pr_info("Card found but it is not enabled, skipping\n"); 751 continue; 752 753 } 754 755 } 756 757 #ifdef CONFIG_NET_POLL_CONTROLLER 758 static void tlan_poll(struct net_device *dev) 759 { 760 disable_irq(dev->irq); 761 tlan_handle_interrupt(dev->irq, dev); 762 enable_irq(dev->irq); 763 } 764 #endif 765 766 static const struct net_device_ops tlan_netdev_ops = { 767 .ndo_open = tlan_open, 768 .ndo_stop = tlan_close, 769 .ndo_start_xmit = tlan_start_tx, 770 .ndo_tx_timeout = tlan_tx_timeout, 771 .ndo_get_stats = tlan_get_stats, 772 .ndo_set_rx_mode = tlan_set_multicast_list, 773 .ndo_do_ioctl = tlan_ioctl, 774 .ndo_set_mac_address = eth_mac_addr, 775 .ndo_validate_addr = eth_validate_addr, 776 #ifdef CONFIG_NET_POLL_CONTROLLER 777 .ndo_poll_controller = tlan_poll, 778 #endif 779 }; 780 781 static void tlan_get_drvinfo(struct net_device *dev, 782 struct ethtool_drvinfo *info) 783 { 784 struct tlan_priv *priv = netdev_priv(dev); 785 786 strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver)); 787 if (priv->pci_dev) 788 strlcpy(info->bus_info, pci_name(priv->pci_dev), 789 sizeof(info->bus_info)); 790 else 791 strlcpy(info->bus_info, "EISA", sizeof(info->bus_info)); 792 } 793 794 static int tlan_get_eeprom_len(struct net_device *dev) 795 { 796 return TLAN_EEPROM_SIZE; 797 } 798 799 static int tlan_get_eeprom(struct net_device *dev, 800 struct ethtool_eeprom *eeprom, u8 *data) 801 { 802 int i; 803 804 for (i = 0; i < TLAN_EEPROM_SIZE; i++) 805 if (tlan_ee_read_byte(dev, i, &data[i])) 806 return -EIO; 807 808 return 0; 809 } 810 811 static const struct ethtool_ops tlan_ethtool_ops = { 812 .get_drvinfo = tlan_get_drvinfo, 813 .get_link = ethtool_op_get_link, 814 .get_eeprom_len = tlan_get_eeprom_len, 815 .get_eeprom = tlan_get_eeprom, 816 }; 817 818 /*************************************************************** 819 * tlan_init 820 * 821 * Returns: 822 * 0 on success, error code otherwise. 823 * Parms: 824 * dev The structure of the device to be 825 * init'ed. 826 * 827 * This function completes the initialization of the 828 * device structure and driver. It reserves the IO 829 * addresses, allocates memory for the lists and bounce 830 * buffers, retrieves the MAC address from the eeprom 831 * and assignes the device's methods. 832 * 833 **************************************************************/ 834 835 static int tlan_init(struct net_device *dev) 836 { 837 int dma_size; 838 int err; 839 int i; 840 struct tlan_priv *priv; 841 842 priv = netdev_priv(dev); 843 844 dma_size = (TLAN_NUM_RX_LISTS + TLAN_NUM_TX_LISTS) 845 * (sizeof(struct tlan_list)); 846 priv->dma_storage = pci_alloc_consistent(priv->pci_dev, 847 dma_size, 848 &priv->dma_storage_dma); 849 priv->dma_size = dma_size; 850 851 if (priv->dma_storage == NULL) { 852 pr_err("Could not allocate lists and buffers for %s\n", 853 dev->name); 854 return -ENOMEM; 855 } 856 memset(priv->dma_storage, 0, dma_size); 857 priv->rx_list = (struct tlan_list *) 858 ALIGN((unsigned long)priv->dma_storage, 8); 859 priv->rx_list_dma = ALIGN(priv->dma_storage_dma, 8); 860 priv->tx_list = priv->rx_list + TLAN_NUM_RX_LISTS; 861 priv->tx_list_dma = 862 priv->rx_list_dma + sizeof(struct tlan_list)*TLAN_NUM_RX_LISTS; 863 864 err = 0; 865 for (i = 0; i < ETH_ALEN; i++) 866 err |= tlan_ee_read_byte(dev, 867 (u8) priv->adapter->addr_ofs + i, 868 (u8 *) &dev->dev_addr[i]); 869 if (err) { 870 pr_err("%s: Error reading MAC from eeprom: %d\n", 871 dev->name, err); 872 } 873 /* Olicom OC-2325/OC-2326 have the address byte-swapped */ 874 if (priv->adapter->addr_ofs == 0xf8) { 875 for (i = 0; i < ETH_ALEN; i += 2) { 876 char tmp = dev->dev_addr[i]; 877 dev->dev_addr[i] = dev->dev_addr[i + 1]; 878 dev->dev_addr[i + 1] = tmp; 879 } 880 } 881 882 netif_carrier_off(dev); 883 884 /* Device methods */ 885 dev->netdev_ops = &tlan_netdev_ops; 886 dev->ethtool_ops = &tlan_ethtool_ops; 887 dev->watchdog_timeo = TX_TIMEOUT; 888 889 return 0; 890 891 } 892 893 894 895 896 /*************************************************************** 897 * tlan_open 898 * 899 * Returns: 900 * 0 on success, error code otherwise. 901 * Parms: 902 * dev Structure of device to be opened. 903 * 904 * This routine puts the driver and TLAN adapter in a 905 * state where it is ready to send and receive packets. 906 * It allocates the IRQ, resets and brings the adapter 907 * out of reset, and allows interrupts. It also delays 908 * the startup for autonegotiation or sends a Rx GO 909 * command to the adapter, as appropriate. 910 * 911 **************************************************************/ 912 913 static int tlan_open(struct net_device *dev) 914 { 915 struct tlan_priv *priv = netdev_priv(dev); 916 int err; 917 918 priv->tlan_rev = tlan_dio_read8(dev->base_addr, TLAN_DEF_REVISION); 919 err = request_irq(dev->irq, tlan_handle_interrupt, IRQF_SHARED, 920 dev->name, dev); 921 922 if (err) { 923 netdev_err(dev, "Cannot open because IRQ %d is already in use\n", 924 dev->irq); 925 return err; 926 } 927 928 timer_setup(&priv->timer, NULL, 0); 929 timer_setup(&priv->media_timer, tlan_phy_monitor, 0); 930 931 tlan_start(dev); 932 933 TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Opened. TLAN Chip Rev: %x\n", 934 dev->name, priv->tlan_rev); 935 936 return 0; 937 938 } 939 940 941 942 /************************************************************** 943 * tlan_ioctl 944 * 945 * Returns: 946 * 0 on success, error code otherwise 947 * Params: 948 * dev structure of device to receive ioctl. 949 * 950 * rq ifreq structure to hold userspace data. 951 * 952 * cmd ioctl command. 953 * 954 * 955 *************************************************************/ 956 957 static int tlan_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) 958 { 959 struct tlan_priv *priv = netdev_priv(dev); 960 struct mii_ioctl_data *data = if_mii(rq); 961 u32 phy = priv->phy[priv->phy_num]; 962 963 if (!priv->phy_online) 964 return -EAGAIN; 965 966 switch (cmd) { 967 case SIOCGMIIPHY: /* get address of MII PHY in use. */ 968 data->phy_id = phy; 969 /* fall through */ 970 971 972 case SIOCGMIIREG: /* read MII PHY register. */ 973 tlan_mii_read_reg(dev, data->phy_id & 0x1f, 974 data->reg_num & 0x1f, &data->val_out); 975 return 0; 976 977 978 case SIOCSMIIREG: /* write MII PHY register. */ 979 tlan_mii_write_reg(dev, data->phy_id & 0x1f, 980 data->reg_num & 0x1f, data->val_in); 981 return 0; 982 default: 983 return -EOPNOTSUPP; 984 } 985 } 986 987 988 /*************************************************************** 989 * tlan_tx_timeout 990 * 991 * Returns: nothing 992 * 993 * Params: 994 * dev structure of device which timed out 995 * during transmit. 996 * 997 **************************************************************/ 998 999 static void tlan_tx_timeout(struct net_device *dev) 1000 { 1001 1002 TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Transmit timed out.\n", dev->name); 1003 1004 /* Ok so we timed out, lets see what we can do about it...*/ 1005 tlan_free_lists(dev); 1006 tlan_reset_lists(dev); 1007 tlan_read_and_clear_stats(dev, TLAN_IGNORE); 1008 tlan_reset_adapter(dev); 1009 netif_trans_update(dev); /* prevent tx timeout */ 1010 netif_wake_queue(dev); 1011 1012 } 1013 1014 1015 /*************************************************************** 1016 * tlan_tx_timeout_work 1017 * 1018 * Returns: nothing 1019 * 1020 * Params: 1021 * work work item of device which timed out 1022 * 1023 **************************************************************/ 1024 1025 static void tlan_tx_timeout_work(struct work_struct *work) 1026 { 1027 struct tlan_priv *priv = 1028 container_of(work, struct tlan_priv, tlan_tqueue); 1029 1030 tlan_tx_timeout(priv->dev); 1031 } 1032 1033 1034 1035 /*************************************************************** 1036 * tlan_start_tx 1037 * 1038 * Returns: 1039 * 0 on success, non-zero on failure. 1040 * Parms: 1041 * skb A pointer to the sk_buff containing the 1042 * frame to be sent. 1043 * dev The device to send the data on. 1044 * 1045 * This function adds a frame to the Tx list to be sent 1046 * ASAP. First it verifies that the adapter is ready and 1047 * there is room in the queue. Then it sets up the next 1048 * available list, copies the frame to the corresponding 1049 * buffer. If the adapter Tx channel is idle, it gives 1050 * the adapter a Tx Go command on the list, otherwise it 1051 * sets the forward address of the previous list to point 1052 * to this one. Then it frees the sk_buff. 1053 * 1054 **************************************************************/ 1055 1056 static netdev_tx_t tlan_start_tx(struct sk_buff *skb, struct net_device *dev) 1057 { 1058 struct tlan_priv *priv = netdev_priv(dev); 1059 dma_addr_t tail_list_phys; 1060 struct tlan_list *tail_list; 1061 unsigned long flags; 1062 unsigned int txlen; 1063 1064 if (!priv->phy_online) { 1065 TLAN_DBG(TLAN_DEBUG_TX, "TRANSMIT: %s PHY is not ready\n", 1066 dev->name); 1067 dev_kfree_skb_any(skb); 1068 return NETDEV_TX_OK; 1069 } 1070 1071 if (skb_padto(skb, TLAN_MIN_FRAME_SIZE)) 1072 return NETDEV_TX_OK; 1073 txlen = max(skb->len, (unsigned int)TLAN_MIN_FRAME_SIZE); 1074 1075 tail_list = priv->tx_list + priv->tx_tail; 1076 tail_list_phys = 1077 priv->tx_list_dma + sizeof(struct tlan_list)*priv->tx_tail; 1078 1079 if (tail_list->c_stat != TLAN_CSTAT_UNUSED) { 1080 TLAN_DBG(TLAN_DEBUG_TX, 1081 "TRANSMIT: %s is busy (Head=%d Tail=%d)\n", 1082 dev->name, priv->tx_head, priv->tx_tail); 1083 netif_stop_queue(dev); 1084 priv->tx_busy_count++; 1085 return NETDEV_TX_BUSY; 1086 } 1087 1088 tail_list->forward = 0; 1089 1090 tail_list->buffer[0].address = pci_map_single(priv->pci_dev, 1091 skb->data, txlen, 1092 PCI_DMA_TODEVICE); 1093 tlan_store_skb(tail_list, skb); 1094 1095 tail_list->frame_size = (u16) txlen; 1096 tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) txlen; 1097 tail_list->buffer[1].count = 0; 1098 tail_list->buffer[1].address = 0; 1099 1100 spin_lock_irqsave(&priv->lock, flags); 1101 tail_list->c_stat = TLAN_CSTAT_READY; 1102 if (!priv->tx_in_progress) { 1103 priv->tx_in_progress = 1; 1104 TLAN_DBG(TLAN_DEBUG_TX, 1105 "TRANSMIT: Starting TX on buffer %d\n", 1106 priv->tx_tail); 1107 outl(tail_list_phys, dev->base_addr + TLAN_CH_PARM); 1108 outl(TLAN_HC_GO, dev->base_addr + TLAN_HOST_CMD); 1109 } else { 1110 TLAN_DBG(TLAN_DEBUG_TX, 1111 "TRANSMIT: Adding buffer %d to TX channel\n", 1112 priv->tx_tail); 1113 if (priv->tx_tail == 0) { 1114 (priv->tx_list + (TLAN_NUM_TX_LISTS - 1))->forward 1115 = tail_list_phys; 1116 } else { 1117 (priv->tx_list + (priv->tx_tail - 1))->forward 1118 = tail_list_phys; 1119 } 1120 } 1121 spin_unlock_irqrestore(&priv->lock, flags); 1122 1123 CIRC_INC(priv->tx_tail, TLAN_NUM_TX_LISTS); 1124 1125 return NETDEV_TX_OK; 1126 1127 } 1128 1129 1130 1131 1132 /*************************************************************** 1133 * tlan_handle_interrupt 1134 * 1135 * Returns: 1136 * Nothing 1137 * Parms: 1138 * irq The line on which the interrupt 1139 * occurred. 1140 * dev_id A pointer to the device assigned to 1141 * this irq line. 1142 * 1143 * This function handles an interrupt generated by its 1144 * assigned TLAN adapter. The function deactivates 1145 * interrupts on its adapter, records the type of 1146 * interrupt, executes the appropriate subhandler, and 1147 * acknowdges the interrupt to the adapter (thus 1148 * re-enabling adapter interrupts. 1149 * 1150 **************************************************************/ 1151 1152 static irqreturn_t tlan_handle_interrupt(int irq, void *dev_id) 1153 { 1154 struct net_device *dev = dev_id; 1155 struct tlan_priv *priv = netdev_priv(dev); 1156 u16 host_int; 1157 u16 type; 1158 1159 spin_lock(&priv->lock); 1160 1161 host_int = inw(dev->base_addr + TLAN_HOST_INT); 1162 type = (host_int & TLAN_HI_IT_MASK) >> 2; 1163 if (type) { 1164 u32 ack; 1165 u32 host_cmd; 1166 1167 outw(host_int, dev->base_addr + TLAN_HOST_INT); 1168 ack = tlan_int_vector[type](dev, host_int); 1169 1170 if (ack) { 1171 host_cmd = TLAN_HC_ACK | ack | (type << 18); 1172 outl(host_cmd, dev->base_addr + TLAN_HOST_CMD); 1173 } 1174 } 1175 1176 spin_unlock(&priv->lock); 1177 1178 return IRQ_RETVAL(type); 1179 } 1180 1181 1182 1183 1184 /*************************************************************** 1185 * tlan_close 1186 * 1187 * Returns: 1188 * An error code. 1189 * Parms: 1190 * dev The device structure of the device to 1191 * close. 1192 * 1193 * This function shuts down the adapter. It records any 1194 * stats, puts the adapter into reset state, deactivates 1195 * its time as needed, and frees the irq it is using. 1196 * 1197 **************************************************************/ 1198 1199 static int tlan_close(struct net_device *dev) 1200 { 1201 tlan_stop(dev); 1202 1203 free_irq(dev->irq, dev); 1204 tlan_free_lists(dev); 1205 TLAN_DBG(TLAN_DEBUG_GNRL, "Device %s closed.\n", dev->name); 1206 1207 return 0; 1208 1209 } 1210 1211 1212 1213 1214 /*************************************************************** 1215 * tlan_get_stats 1216 * 1217 * Returns: 1218 * A pointer to the device's statistics structure. 1219 * Parms: 1220 * dev The device structure to return the 1221 * stats for. 1222 * 1223 * This function updates the devices statistics by reading 1224 * the TLAN chip's onboard registers. Then it returns the 1225 * address of the statistics structure. 1226 * 1227 **************************************************************/ 1228 1229 static struct net_device_stats *tlan_get_stats(struct net_device *dev) 1230 { 1231 struct tlan_priv *priv = netdev_priv(dev); 1232 int i; 1233 1234 /* Should only read stats if open ? */ 1235 tlan_read_and_clear_stats(dev, TLAN_RECORD); 1236 1237 TLAN_DBG(TLAN_DEBUG_RX, "RECEIVE: %s EOC count = %d\n", dev->name, 1238 priv->rx_eoc_count); 1239 TLAN_DBG(TLAN_DEBUG_TX, "TRANSMIT: %s Busy count = %d\n", dev->name, 1240 priv->tx_busy_count); 1241 if (debug & TLAN_DEBUG_GNRL) { 1242 tlan_print_dio(dev->base_addr); 1243 tlan_phy_print(dev); 1244 } 1245 if (debug & TLAN_DEBUG_LIST) { 1246 for (i = 0; i < TLAN_NUM_RX_LISTS; i++) 1247 tlan_print_list(priv->rx_list + i, "RX", i); 1248 for (i = 0; i < TLAN_NUM_TX_LISTS; i++) 1249 tlan_print_list(priv->tx_list + i, "TX", i); 1250 } 1251 1252 return &dev->stats; 1253 1254 } 1255 1256 1257 1258 1259 /*************************************************************** 1260 * tlan_set_multicast_list 1261 * 1262 * Returns: 1263 * Nothing 1264 * Parms: 1265 * dev The device structure to set the 1266 * multicast list for. 1267 * 1268 * This function sets the TLAN adaptor to various receive 1269 * modes. If the IFF_PROMISC flag is set, promiscuous 1270 * mode is acitviated. Otherwise, promiscuous mode is 1271 * turned off. If the IFF_ALLMULTI flag is set, then 1272 * the hash table is set to receive all group addresses. 1273 * Otherwise, the first three multicast addresses are 1274 * stored in AREG_1-3, and the rest are selected via the 1275 * hash table, as necessary. 1276 * 1277 **************************************************************/ 1278 1279 static void tlan_set_multicast_list(struct net_device *dev) 1280 { 1281 struct netdev_hw_addr *ha; 1282 u32 hash1 = 0; 1283 u32 hash2 = 0; 1284 int i; 1285 u32 offset; 1286 u8 tmp; 1287 1288 if (dev->flags & IFF_PROMISC) { 1289 tmp = tlan_dio_read8(dev->base_addr, TLAN_NET_CMD); 1290 tlan_dio_write8(dev->base_addr, 1291 TLAN_NET_CMD, tmp | TLAN_NET_CMD_CAF); 1292 } else { 1293 tmp = tlan_dio_read8(dev->base_addr, TLAN_NET_CMD); 1294 tlan_dio_write8(dev->base_addr, 1295 TLAN_NET_CMD, tmp & ~TLAN_NET_CMD_CAF); 1296 if (dev->flags & IFF_ALLMULTI) { 1297 for (i = 0; i < 3; i++) 1298 tlan_set_mac(dev, i + 1, NULL); 1299 tlan_dio_write32(dev->base_addr, TLAN_HASH_1, 1300 0xffffffff); 1301 tlan_dio_write32(dev->base_addr, TLAN_HASH_2, 1302 0xffffffff); 1303 } else { 1304 i = 0; 1305 netdev_for_each_mc_addr(ha, dev) { 1306 if (i < 3) { 1307 tlan_set_mac(dev, i + 1, 1308 (char *) &ha->addr); 1309 } else { 1310 offset = 1311 tlan_hash_func((u8 *)&ha->addr); 1312 if (offset < 32) 1313 hash1 |= (1 << offset); 1314 else 1315 hash2 |= (1 << (offset - 32)); 1316 } 1317 i++; 1318 } 1319 for ( ; i < 3; i++) 1320 tlan_set_mac(dev, i + 1, NULL); 1321 tlan_dio_write32(dev->base_addr, TLAN_HASH_1, hash1); 1322 tlan_dio_write32(dev->base_addr, TLAN_HASH_2, hash2); 1323 } 1324 } 1325 1326 } 1327 1328 1329 1330 /***************************************************************************** 1331 ****************************************************************************** 1332 1333 ThunderLAN driver interrupt vectors and table 1334 1335 please see chap. 4, "Interrupt Handling" of the "ThunderLAN 1336 Programmer's Guide" for more informations on handling interrupts 1337 generated by TLAN based adapters. 1338 1339 ****************************************************************************** 1340 *****************************************************************************/ 1341 1342 1343 1344 1345 /*************************************************************** 1346 * tlan_handle_tx_eof 1347 * 1348 * Returns: 1349 * 1 1350 * Parms: 1351 * dev Device assigned the IRQ that was 1352 * raised. 1353 * host_int The contents of the HOST_INT 1354 * port. 1355 * 1356 * This function handles Tx EOF interrupts which are raised 1357 * by the adapter when it has completed sending the 1358 * contents of a buffer. If detemines which list/buffer 1359 * was completed and resets it. If the buffer was the last 1360 * in the channel (EOC), then the function checks to see if 1361 * another buffer is ready to send, and if so, sends a Tx 1362 * Go command. Finally, the driver activates/continues the 1363 * activity LED. 1364 * 1365 **************************************************************/ 1366 1367 static u32 tlan_handle_tx_eof(struct net_device *dev, u16 host_int) 1368 { 1369 struct tlan_priv *priv = netdev_priv(dev); 1370 int eoc = 0; 1371 struct tlan_list *head_list; 1372 dma_addr_t head_list_phys; 1373 u32 ack = 0; 1374 u16 tmp_c_stat; 1375 1376 TLAN_DBG(TLAN_DEBUG_TX, 1377 "TRANSMIT: Handling TX EOF (Head=%d Tail=%d)\n", 1378 priv->tx_head, priv->tx_tail); 1379 head_list = priv->tx_list + priv->tx_head; 1380 1381 while (((tmp_c_stat = head_list->c_stat) & TLAN_CSTAT_FRM_CMP) 1382 && (ack < 255)) { 1383 struct sk_buff *skb = tlan_get_skb(head_list); 1384 1385 ack++; 1386 pci_unmap_single(priv->pci_dev, head_list->buffer[0].address, 1387 max(skb->len, 1388 (unsigned int)TLAN_MIN_FRAME_SIZE), 1389 PCI_DMA_TODEVICE); 1390 dev_kfree_skb_any(skb); 1391 head_list->buffer[8].address = 0; 1392 head_list->buffer[9].address = 0; 1393 1394 if (tmp_c_stat & TLAN_CSTAT_EOC) 1395 eoc = 1; 1396 1397 dev->stats.tx_bytes += head_list->frame_size; 1398 1399 head_list->c_stat = TLAN_CSTAT_UNUSED; 1400 netif_start_queue(dev); 1401 CIRC_INC(priv->tx_head, TLAN_NUM_TX_LISTS); 1402 head_list = priv->tx_list + priv->tx_head; 1403 } 1404 1405 if (!ack) 1406 netdev_info(dev, 1407 "Received interrupt for uncompleted TX frame\n"); 1408 1409 if (eoc) { 1410 TLAN_DBG(TLAN_DEBUG_TX, 1411 "TRANSMIT: handling TX EOC (Head=%d Tail=%d)\n", 1412 priv->tx_head, priv->tx_tail); 1413 head_list = priv->tx_list + priv->tx_head; 1414 head_list_phys = priv->tx_list_dma 1415 + sizeof(struct tlan_list)*priv->tx_head; 1416 if ((head_list->c_stat & TLAN_CSTAT_READY) 1417 == TLAN_CSTAT_READY) { 1418 outl(head_list_phys, dev->base_addr + TLAN_CH_PARM); 1419 ack |= TLAN_HC_GO; 1420 } else { 1421 priv->tx_in_progress = 0; 1422 } 1423 } 1424 1425 if (priv->adapter->flags & TLAN_ADAPTER_ACTIVITY_LED) { 1426 tlan_dio_write8(dev->base_addr, 1427 TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT); 1428 if (priv->timer.function == NULL) { 1429 priv->timer.function = tlan_timer; 1430 priv->timer.expires = jiffies + TLAN_TIMER_ACT_DELAY; 1431 priv->timer_set_at = jiffies; 1432 priv->timer_type = TLAN_TIMER_ACTIVITY; 1433 add_timer(&priv->timer); 1434 } else if (priv->timer_type == TLAN_TIMER_ACTIVITY) { 1435 priv->timer_set_at = jiffies; 1436 } 1437 } 1438 1439 return ack; 1440 1441 } 1442 1443 1444 1445 1446 /*************************************************************** 1447 * TLan_HandleStatOverflow 1448 * 1449 * Returns: 1450 * 1 1451 * Parms: 1452 * dev Device assigned the IRQ that was 1453 * raised. 1454 * host_int The contents of the HOST_INT 1455 * port. 1456 * 1457 * This function handles the Statistics Overflow interrupt 1458 * which means that one or more of the TLAN statistics 1459 * registers has reached 1/2 capacity and needs to be read. 1460 * 1461 **************************************************************/ 1462 1463 static u32 tlan_handle_stat_overflow(struct net_device *dev, u16 host_int) 1464 { 1465 tlan_read_and_clear_stats(dev, TLAN_RECORD); 1466 1467 return 1; 1468 1469 } 1470 1471 1472 1473 1474 /*************************************************************** 1475 * TLan_HandleRxEOF 1476 * 1477 * Returns: 1478 * 1 1479 * Parms: 1480 * dev Device assigned the IRQ that was 1481 * raised. 1482 * host_int The contents of the HOST_INT 1483 * port. 1484 * 1485 * This function handles the Rx EOF interrupt which 1486 * indicates a frame has been received by the adapter from 1487 * the net and the frame has been transferred to memory. 1488 * The function determines the bounce buffer the frame has 1489 * been loaded into, creates a new sk_buff big enough to 1490 * hold the frame, and sends it to protocol stack. It 1491 * then resets the used buffer and appends it to the end 1492 * of the list. If the frame was the last in the Rx 1493 * channel (EOC), the function restarts the receive channel 1494 * by sending an Rx Go command to the adapter. Then it 1495 * activates/continues the activity LED. 1496 * 1497 **************************************************************/ 1498 1499 static u32 tlan_handle_rx_eof(struct net_device *dev, u16 host_int) 1500 { 1501 struct tlan_priv *priv = netdev_priv(dev); 1502 u32 ack = 0; 1503 int eoc = 0; 1504 struct tlan_list *head_list; 1505 struct sk_buff *skb; 1506 struct tlan_list *tail_list; 1507 u16 tmp_c_stat; 1508 dma_addr_t head_list_phys; 1509 1510 TLAN_DBG(TLAN_DEBUG_RX, "RECEIVE: handling RX EOF (Head=%d Tail=%d)\n", 1511 priv->rx_head, priv->rx_tail); 1512 head_list = priv->rx_list + priv->rx_head; 1513 head_list_phys = 1514 priv->rx_list_dma + sizeof(struct tlan_list)*priv->rx_head; 1515 1516 while (((tmp_c_stat = head_list->c_stat) & TLAN_CSTAT_FRM_CMP) 1517 && (ack < 255)) { 1518 dma_addr_t frame_dma = head_list->buffer[0].address; 1519 u32 frame_size = head_list->frame_size; 1520 struct sk_buff *new_skb; 1521 1522 ack++; 1523 if (tmp_c_stat & TLAN_CSTAT_EOC) 1524 eoc = 1; 1525 1526 new_skb = netdev_alloc_skb_ip_align(dev, 1527 TLAN_MAX_FRAME_SIZE + 5); 1528 if (!new_skb) 1529 goto drop_and_reuse; 1530 1531 skb = tlan_get_skb(head_list); 1532 pci_unmap_single(priv->pci_dev, frame_dma, 1533 TLAN_MAX_FRAME_SIZE, PCI_DMA_FROMDEVICE); 1534 skb_put(skb, frame_size); 1535 1536 dev->stats.rx_bytes += frame_size; 1537 1538 skb->protocol = eth_type_trans(skb, dev); 1539 netif_rx(skb); 1540 1541 head_list->buffer[0].address = 1542 pci_map_single(priv->pci_dev, new_skb->data, 1543 TLAN_MAX_FRAME_SIZE, PCI_DMA_FROMDEVICE); 1544 1545 tlan_store_skb(head_list, new_skb); 1546 drop_and_reuse: 1547 head_list->forward = 0; 1548 head_list->c_stat = 0; 1549 tail_list = priv->rx_list + priv->rx_tail; 1550 tail_list->forward = head_list_phys; 1551 1552 CIRC_INC(priv->rx_head, TLAN_NUM_RX_LISTS); 1553 CIRC_INC(priv->rx_tail, TLAN_NUM_RX_LISTS); 1554 head_list = priv->rx_list + priv->rx_head; 1555 head_list_phys = priv->rx_list_dma 1556 + sizeof(struct tlan_list)*priv->rx_head; 1557 } 1558 1559 if (!ack) 1560 netdev_info(dev, 1561 "Received interrupt for uncompleted RX frame\n"); 1562 1563 1564 if (eoc) { 1565 TLAN_DBG(TLAN_DEBUG_RX, 1566 "RECEIVE: handling RX EOC (Head=%d Tail=%d)\n", 1567 priv->rx_head, priv->rx_tail); 1568 head_list = priv->rx_list + priv->rx_head; 1569 head_list_phys = priv->rx_list_dma 1570 + sizeof(struct tlan_list)*priv->rx_head; 1571 outl(head_list_phys, dev->base_addr + TLAN_CH_PARM); 1572 ack |= TLAN_HC_GO | TLAN_HC_RT; 1573 priv->rx_eoc_count++; 1574 } 1575 1576 if (priv->adapter->flags & TLAN_ADAPTER_ACTIVITY_LED) { 1577 tlan_dio_write8(dev->base_addr, 1578 TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT); 1579 if (priv->timer.function == NULL) { 1580 priv->timer.function = tlan_timer; 1581 priv->timer.expires = jiffies + TLAN_TIMER_ACT_DELAY; 1582 priv->timer_set_at = jiffies; 1583 priv->timer_type = TLAN_TIMER_ACTIVITY; 1584 add_timer(&priv->timer); 1585 } else if (priv->timer_type == TLAN_TIMER_ACTIVITY) { 1586 priv->timer_set_at = jiffies; 1587 } 1588 } 1589 1590 return ack; 1591 1592 } 1593 1594 1595 1596 1597 /*************************************************************** 1598 * tlan_handle_dummy 1599 * 1600 * Returns: 1601 * 1 1602 * Parms: 1603 * dev Device assigned the IRQ that was 1604 * raised. 1605 * host_int The contents of the HOST_INT 1606 * port. 1607 * 1608 * This function handles the Dummy interrupt, which is 1609 * raised whenever a test interrupt is generated by setting 1610 * the Req_Int bit of HOST_CMD to 1. 1611 * 1612 **************************************************************/ 1613 1614 static u32 tlan_handle_dummy(struct net_device *dev, u16 host_int) 1615 { 1616 netdev_info(dev, "Test interrupt\n"); 1617 return 1; 1618 1619 } 1620 1621 1622 1623 1624 /*************************************************************** 1625 * tlan_handle_tx_eoc 1626 * 1627 * Returns: 1628 * 1 1629 * Parms: 1630 * dev Device assigned the IRQ that was 1631 * raised. 1632 * host_int The contents of the HOST_INT 1633 * port. 1634 * 1635 * This driver is structured to determine EOC occurrences by 1636 * reading the CSTAT member of the list structure. Tx EOC 1637 * interrupts are disabled via the DIO INTDIS register. 1638 * However, TLAN chips before revision 3.0 didn't have this 1639 * functionality, so process EOC events if this is the 1640 * case. 1641 * 1642 **************************************************************/ 1643 1644 static u32 tlan_handle_tx_eoc(struct net_device *dev, u16 host_int) 1645 { 1646 struct tlan_priv *priv = netdev_priv(dev); 1647 struct tlan_list *head_list; 1648 dma_addr_t head_list_phys; 1649 u32 ack = 1; 1650 1651 if (priv->tlan_rev < 0x30) { 1652 TLAN_DBG(TLAN_DEBUG_TX, 1653 "TRANSMIT: handling TX EOC (Head=%d Tail=%d) -- IRQ\n", 1654 priv->tx_head, priv->tx_tail); 1655 head_list = priv->tx_list + priv->tx_head; 1656 head_list_phys = priv->tx_list_dma 1657 + sizeof(struct tlan_list)*priv->tx_head; 1658 if ((head_list->c_stat & TLAN_CSTAT_READY) 1659 == TLAN_CSTAT_READY) { 1660 netif_stop_queue(dev); 1661 outl(head_list_phys, dev->base_addr + TLAN_CH_PARM); 1662 ack |= TLAN_HC_GO; 1663 } else { 1664 priv->tx_in_progress = 0; 1665 } 1666 } 1667 1668 return ack; 1669 1670 } 1671 1672 1673 1674 1675 /*************************************************************** 1676 * tlan_handle_status_check 1677 * 1678 * Returns: 1679 * 0 if Adapter check, 1 if Network Status check. 1680 * Parms: 1681 * dev Device assigned the IRQ that was 1682 * raised. 1683 * host_int The contents of the HOST_INT 1684 * port. 1685 * 1686 * This function handles Adapter Check/Network Status 1687 * interrupts generated by the adapter. It checks the 1688 * vector in the HOST_INT register to determine if it is 1689 * an Adapter Check interrupt. If so, it resets the 1690 * adapter. Otherwise it clears the status registers 1691 * and services the PHY. 1692 * 1693 **************************************************************/ 1694 1695 static u32 tlan_handle_status_check(struct net_device *dev, u16 host_int) 1696 { 1697 struct tlan_priv *priv = netdev_priv(dev); 1698 u32 ack; 1699 u32 error; 1700 u8 net_sts; 1701 u32 phy; 1702 u16 tlphy_ctl; 1703 u16 tlphy_sts; 1704 1705 ack = 1; 1706 if (host_int & TLAN_HI_IV_MASK) { 1707 netif_stop_queue(dev); 1708 error = inl(dev->base_addr + TLAN_CH_PARM); 1709 netdev_info(dev, "Adaptor Error = 0x%x\n", error); 1710 tlan_read_and_clear_stats(dev, TLAN_RECORD); 1711 outl(TLAN_HC_AD_RST, dev->base_addr + TLAN_HOST_CMD); 1712 1713 schedule_work(&priv->tlan_tqueue); 1714 1715 netif_wake_queue(dev); 1716 ack = 0; 1717 } else { 1718 TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Status Check\n", dev->name); 1719 phy = priv->phy[priv->phy_num]; 1720 1721 net_sts = tlan_dio_read8(dev->base_addr, TLAN_NET_STS); 1722 if (net_sts) { 1723 tlan_dio_write8(dev->base_addr, TLAN_NET_STS, net_sts); 1724 TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Net_Sts = %x\n", 1725 dev->name, (unsigned) net_sts); 1726 } 1727 if ((net_sts & TLAN_NET_STS_MIRQ) && (priv->phy_num == 0)) { 1728 tlan_mii_read_reg(dev, phy, TLAN_TLPHY_STS, &tlphy_sts); 1729 tlan_mii_read_reg(dev, phy, TLAN_TLPHY_CTL, &tlphy_ctl); 1730 if (!(tlphy_sts & TLAN_TS_POLOK) && 1731 !(tlphy_ctl & TLAN_TC_SWAPOL)) { 1732 tlphy_ctl |= TLAN_TC_SWAPOL; 1733 tlan_mii_write_reg(dev, phy, TLAN_TLPHY_CTL, 1734 tlphy_ctl); 1735 } else if ((tlphy_sts & TLAN_TS_POLOK) && 1736 (tlphy_ctl & TLAN_TC_SWAPOL)) { 1737 tlphy_ctl &= ~TLAN_TC_SWAPOL; 1738 tlan_mii_write_reg(dev, phy, TLAN_TLPHY_CTL, 1739 tlphy_ctl); 1740 } 1741 1742 if (debug) 1743 tlan_phy_print(dev); 1744 } 1745 } 1746 1747 return ack; 1748 1749 } 1750 1751 1752 1753 1754 /*************************************************************** 1755 * tlan_handle_rx_eoc 1756 * 1757 * Returns: 1758 * 1 1759 * Parms: 1760 * dev Device assigned the IRQ that was 1761 * raised. 1762 * host_int The contents of the HOST_INT 1763 * port. 1764 * 1765 * This driver is structured to determine EOC occurrences by 1766 * reading the CSTAT member of the list structure. Rx EOC 1767 * interrupts are disabled via the DIO INTDIS register. 1768 * However, TLAN chips before revision 3.0 didn't have this 1769 * CSTAT member or a INTDIS register, so if this chip is 1770 * pre-3.0, process EOC interrupts normally. 1771 * 1772 **************************************************************/ 1773 1774 static u32 tlan_handle_rx_eoc(struct net_device *dev, u16 host_int) 1775 { 1776 struct tlan_priv *priv = netdev_priv(dev); 1777 dma_addr_t head_list_phys; 1778 u32 ack = 1; 1779 1780 if (priv->tlan_rev < 0x30) { 1781 TLAN_DBG(TLAN_DEBUG_RX, 1782 "RECEIVE: Handling RX EOC (head=%d tail=%d) -- IRQ\n", 1783 priv->rx_head, priv->rx_tail); 1784 head_list_phys = priv->rx_list_dma 1785 + sizeof(struct tlan_list)*priv->rx_head; 1786 outl(head_list_phys, dev->base_addr + TLAN_CH_PARM); 1787 ack |= TLAN_HC_GO | TLAN_HC_RT; 1788 priv->rx_eoc_count++; 1789 } 1790 1791 return ack; 1792 1793 } 1794 1795 1796 1797 1798 /***************************************************************************** 1799 ****************************************************************************** 1800 1801 ThunderLAN driver timer function 1802 1803 ****************************************************************************** 1804 *****************************************************************************/ 1805 1806 1807 /*************************************************************** 1808 * tlan_timer 1809 * 1810 * Returns: 1811 * Nothing 1812 * Parms: 1813 * data A value given to add timer when 1814 * add_timer was called. 1815 * 1816 * This function handles timed functionality for the 1817 * TLAN driver. The two current timer uses are for 1818 * delaying for autonegotionation and driving the ACT LED. 1819 * - Autonegotiation requires being allowed about 1820 * 2 1/2 seconds before attempting to transmit a 1821 * packet. It would be a very bad thing to hang 1822 * the kernel this long, so the driver doesn't 1823 * allow transmission 'til after this time, for 1824 * certain PHYs. It would be much nicer if all 1825 * PHYs were interrupt-capable like the internal 1826 * PHY. 1827 * - The ACT LED, which shows adapter activity, is 1828 * driven by the driver, and so must be left on 1829 * for a short period to power up the LED so it 1830 * can be seen. This delay can be changed by 1831 * changing the TLAN_TIMER_ACT_DELAY in tlan.h, 1832 * if desired. 100 ms produces a slightly 1833 * sluggish response. 1834 * 1835 **************************************************************/ 1836 1837 static void tlan_timer(struct timer_list *t) 1838 { 1839 struct tlan_priv *priv = from_timer(priv, t, timer); 1840 struct net_device *dev = priv->dev; 1841 u32 elapsed; 1842 unsigned long flags = 0; 1843 1844 priv->timer.function = NULL; 1845 1846 switch (priv->timer_type) { 1847 case TLAN_TIMER_PHY_PDOWN: 1848 tlan_phy_power_down(dev); 1849 break; 1850 case TLAN_TIMER_PHY_PUP: 1851 tlan_phy_power_up(dev); 1852 break; 1853 case TLAN_TIMER_PHY_RESET: 1854 tlan_phy_reset(dev); 1855 break; 1856 case TLAN_TIMER_PHY_START_LINK: 1857 tlan_phy_start_link(dev); 1858 break; 1859 case TLAN_TIMER_PHY_FINISH_AN: 1860 tlan_phy_finish_auto_neg(dev); 1861 break; 1862 case TLAN_TIMER_FINISH_RESET: 1863 tlan_finish_reset(dev); 1864 break; 1865 case TLAN_TIMER_ACTIVITY: 1866 spin_lock_irqsave(&priv->lock, flags); 1867 if (priv->timer.function == NULL) { 1868 elapsed = jiffies - priv->timer_set_at; 1869 if (elapsed >= TLAN_TIMER_ACT_DELAY) { 1870 tlan_dio_write8(dev->base_addr, 1871 TLAN_LED_REG, TLAN_LED_LINK); 1872 } else { 1873 priv->timer.expires = priv->timer_set_at 1874 + TLAN_TIMER_ACT_DELAY; 1875 spin_unlock_irqrestore(&priv->lock, flags); 1876 add_timer(&priv->timer); 1877 break; 1878 } 1879 } 1880 spin_unlock_irqrestore(&priv->lock, flags); 1881 break; 1882 default: 1883 break; 1884 } 1885 1886 } 1887 1888 1889 /***************************************************************************** 1890 ****************************************************************************** 1891 1892 ThunderLAN driver adapter related routines 1893 1894 ****************************************************************************** 1895 *****************************************************************************/ 1896 1897 1898 /*************************************************************** 1899 * tlan_reset_lists 1900 * 1901 * Returns: 1902 * Nothing 1903 * Parms: 1904 * dev The device structure with the list 1905 * structures to be reset. 1906 * 1907 * This routine sets the variables associated with managing 1908 * the TLAN lists to their initial values. 1909 * 1910 **************************************************************/ 1911 1912 static void tlan_reset_lists(struct net_device *dev) 1913 { 1914 struct tlan_priv *priv = netdev_priv(dev); 1915 int i; 1916 struct tlan_list *list; 1917 dma_addr_t list_phys; 1918 struct sk_buff *skb; 1919 1920 priv->tx_head = 0; 1921 priv->tx_tail = 0; 1922 for (i = 0; i < TLAN_NUM_TX_LISTS; i++) { 1923 list = priv->tx_list + i; 1924 list->c_stat = TLAN_CSTAT_UNUSED; 1925 list->buffer[0].address = 0; 1926 list->buffer[2].count = 0; 1927 list->buffer[2].address = 0; 1928 list->buffer[8].address = 0; 1929 list->buffer[9].address = 0; 1930 } 1931 1932 priv->rx_head = 0; 1933 priv->rx_tail = TLAN_NUM_RX_LISTS - 1; 1934 for (i = 0; i < TLAN_NUM_RX_LISTS; i++) { 1935 list = priv->rx_list + i; 1936 list_phys = priv->rx_list_dma + sizeof(struct tlan_list)*i; 1937 list->c_stat = TLAN_CSTAT_READY; 1938 list->frame_size = TLAN_MAX_FRAME_SIZE; 1939 list->buffer[0].count = TLAN_MAX_FRAME_SIZE | TLAN_LAST_BUFFER; 1940 skb = netdev_alloc_skb_ip_align(dev, TLAN_MAX_FRAME_SIZE + 5); 1941 if (!skb) 1942 break; 1943 1944 list->buffer[0].address = pci_map_single(priv->pci_dev, 1945 skb->data, 1946 TLAN_MAX_FRAME_SIZE, 1947 PCI_DMA_FROMDEVICE); 1948 tlan_store_skb(list, skb); 1949 list->buffer[1].count = 0; 1950 list->buffer[1].address = 0; 1951 list->forward = list_phys + sizeof(struct tlan_list); 1952 } 1953 1954 /* in case ran out of memory early, clear bits */ 1955 while (i < TLAN_NUM_RX_LISTS) { 1956 tlan_store_skb(priv->rx_list + i, NULL); 1957 ++i; 1958 } 1959 list->forward = 0; 1960 1961 } 1962 1963 1964 static void tlan_free_lists(struct net_device *dev) 1965 { 1966 struct tlan_priv *priv = netdev_priv(dev); 1967 int i; 1968 struct tlan_list *list; 1969 struct sk_buff *skb; 1970 1971 for (i = 0; i < TLAN_NUM_TX_LISTS; i++) { 1972 list = priv->tx_list + i; 1973 skb = tlan_get_skb(list); 1974 if (skb) { 1975 pci_unmap_single( 1976 priv->pci_dev, 1977 list->buffer[0].address, 1978 max(skb->len, 1979 (unsigned int)TLAN_MIN_FRAME_SIZE), 1980 PCI_DMA_TODEVICE); 1981 dev_kfree_skb_any(skb); 1982 list->buffer[8].address = 0; 1983 list->buffer[9].address = 0; 1984 } 1985 } 1986 1987 for (i = 0; i < TLAN_NUM_RX_LISTS; i++) { 1988 list = priv->rx_list + i; 1989 skb = tlan_get_skb(list); 1990 if (skb) { 1991 pci_unmap_single(priv->pci_dev, 1992 list->buffer[0].address, 1993 TLAN_MAX_FRAME_SIZE, 1994 PCI_DMA_FROMDEVICE); 1995 dev_kfree_skb_any(skb); 1996 list->buffer[8].address = 0; 1997 list->buffer[9].address = 0; 1998 } 1999 } 2000 } 2001 2002 2003 2004 2005 /*************************************************************** 2006 * tlan_print_dio 2007 * 2008 * Returns: 2009 * Nothing 2010 * Parms: 2011 * io_base Base IO port of the device of 2012 * which to print DIO registers. 2013 * 2014 * This function prints out all the internal (DIO) 2015 * registers of a TLAN chip. 2016 * 2017 **************************************************************/ 2018 2019 static void tlan_print_dio(u16 io_base) 2020 { 2021 u32 data0, data1; 2022 int i; 2023 2024 pr_info("Contents of internal registers for io base 0x%04hx\n", 2025 io_base); 2026 pr_info("Off. +0 +4\n"); 2027 for (i = 0; i < 0x4C; i += 8) { 2028 data0 = tlan_dio_read32(io_base, i); 2029 data1 = tlan_dio_read32(io_base, i + 0x4); 2030 pr_info("0x%02x 0x%08x 0x%08x\n", i, data0, data1); 2031 } 2032 2033 } 2034 2035 2036 2037 2038 /*************************************************************** 2039 * TLan_PrintList 2040 * 2041 * Returns: 2042 * Nothing 2043 * Parms: 2044 * list A pointer to the struct tlan_list structure to 2045 * be printed. 2046 * type A string to designate type of list, 2047 * "Rx" or "Tx". 2048 * num The index of the list. 2049 * 2050 * This function prints out the contents of the list 2051 * pointed to by the list parameter. 2052 * 2053 **************************************************************/ 2054 2055 static void tlan_print_list(struct tlan_list *list, char *type, int num) 2056 { 2057 int i; 2058 2059 pr_info("%s List %d at %p\n", type, num, list); 2060 pr_info(" Forward = 0x%08x\n", list->forward); 2061 pr_info(" CSTAT = 0x%04hx\n", list->c_stat); 2062 pr_info(" Frame Size = 0x%04hx\n", list->frame_size); 2063 /* for (i = 0; i < 10; i++) { */ 2064 for (i = 0; i < 2; i++) { 2065 pr_info(" Buffer[%d].count, addr = 0x%08x, 0x%08x\n", 2066 i, list->buffer[i].count, list->buffer[i].address); 2067 } 2068 2069 } 2070 2071 2072 2073 2074 /*************************************************************** 2075 * tlan_read_and_clear_stats 2076 * 2077 * Returns: 2078 * Nothing 2079 * Parms: 2080 * dev Pointer to device structure of adapter 2081 * to which to read stats. 2082 * record Flag indicating whether to add 2083 * 2084 * This functions reads all the internal status registers 2085 * of the TLAN chip, which clears them as a side effect. 2086 * It then either adds the values to the device's status 2087 * struct, or discards them, depending on whether record 2088 * is TLAN_RECORD (!=0) or TLAN_IGNORE (==0). 2089 * 2090 **************************************************************/ 2091 2092 static void tlan_read_and_clear_stats(struct net_device *dev, int record) 2093 { 2094 u32 tx_good, tx_under; 2095 u32 rx_good, rx_over; 2096 u32 def_tx, crc, code; 2097 u32 multi_col, single_col; 2098 u32 excess_col, late_col, loss; 2099 2100 outw(TLAN_GOOD_TX_FRMS, dev->base_addr + TLAN_DIO_ADR); 2101 tx_good = inb(dev->base_addr + TLAN_DIO_DATA); 2102 tx_good += inb(dev->base_addr + TLAN_DIO_DATA + 1) << 8; 2103 tx_good += inb(dev->base_addr + TLAN_DIO_DATA + 2) << 16; 2104 tx_under = inb(dev->base_addr + TLAN_DIO_DATA + 3); 2105 2106 outw(TLAN_GOOD_RX_FRMS, dev->base_addr + TLAN_DIO_ADR); 2107 rx_good = inb(dev->base_addr + TLAN_DIO_DATA); 2108 rx_good += inb(dev->base_addr + TLAN_DIO_DATA + 1) << 8; 2109 rx_good += inb(dev->base_addr + TLAN_DIO_DATA + 2) << 16; 2110 rx_over = inb(dev->base_addr + TLAN_DIO_DATA + 3); 2111 2112 outw(TLAN_DEFERRED_TX, dev->base_addr + TLAN_DIO_ADR); 2113 def_tx = inb(dev->base_addr + TLAN_DIO_DATA); 2114 def_tx += inb(dev->base_addr + TLAN_DIO_DATA + 1) << 8; 2115 crc = inb(dev->base_addr + TLAN_DIO_DATA + 2); 2116 code = inb(dev->base_addr + TLAN_DIO_DATA + 3); 2117 2118 outw(TLAN_MULTICOL_FRMS, dev->base_addr + TLAN_DIO_ADR); 2119 multi_col = inb(dev->base_addr + TLAN_DIO_DATA); 2120 multi_col += inb(dev->base_addr + TLAN_DIO_DATA + 1) << 8; 2121 single_col = inb(dev->base_addr + TLAN_DIO_DATA + 2); 2122 single_col += inb(dev->base_addr + TLAN_DIO_DATA + 3) << 8; 2123 2124 outw(TLAN_EXCESSCOL_FRMS, dev->base_addr + TLAN_DIO_ADR); 2125 excess_col = inb(dev->base_addr + TLAN_DIO_DATA); 2126 late_col = inb(dev->base_addr + TLAN_DIO_DATA + 1); 2127 loss = inb(dev->base_addr + TLAN_DIO_DATA + 2); 2128 2129 if (record) { 2130 dev->stats.rx_packets += rx_good; 2131 dev->stats.rx_errors += rx_over + crc + code; 2132 dev->stats.tx_packets += tx_good; 2133 dev->stats.tx_errors += tx_under + loss; 2134 dev->stats.collisions += multi_col 2135 + single_col + excess_col + late_col; 2136 2137 dev->stats.rx_over_errors += rx_over; 2138 dev->stats.rx_crc_errors += crc; 2139 dev->stats.rx_frame_errors += code; 2140 2141 dev->stats.tx_aborted_errors += tx_under; 2142 dev->stats.tx_carrier_errors += loss; 2143 } 2144 2145 } 2146 2147 2148 2149 2150 /*************************************************************** 2151 * TLan_Reset 2152 * 2153 * Returns: 2154 * 0 2155 * Parms: 2156 * dev Pointer to device structure of adapter 2157 * to be reset. 2158 * 2159 * This function resets the adapter and it's physical 2160 * device. See Chap. 3, pp. 9-10 of the "ThunderLAN 2161 * Programmer's Guide" for details. The routine tries to 2162 * implement what is detailed there, though adjustments 2163 * have been made. 2164 * 2165 **************************************************************/ 2166 2167 static void 2168 tlan_reset_adapter(struct net_device *dev) 2169 { 2170 struct tlan_priv *priv = netdev_priv(dev); 2171 int i; 2172 u32 addr; 2173 u32 data; 2174 u8 data8; 2175 2176 priv->tlan_full_duplex = false; 2177 priv->phy_online = 0; 2178 netif_carrier_off(dev); 2179 2180 /* 1. Assert reset bit. */ 2181 2182 data = inl(dev->base_addr + TLAN_HOST_CMD); 2183 data |= TLAN_HC_AD_RST; 2184 outl(data, dev->base_addr + TLAN_HOST_CMD); 2185 2186 udelay(1000); 2187 2188 /* 2. Turn off interrupts. (Probably isn't necessary) */ 2189 2190 data = inl(dev->base_addr + TLAN_HOST_CMD); 2191 data |= TLAN_HC_INT_OFF; 2192 outl(data, dev->base_addr + TLAN_HOST_CMD); 2193 2194 /* 3. Clear AREGs and HASHs. */ 2195 2196 for (i = TLAN_AREG_0; i <= TLAN_HASH_2; i += 4) 2197 tlan_dio_write32(dev->base_addr, (u16) i, 0); 2198 2199 /* 4. Setup NetConfig register. */ 2200 2201 data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN | TLAN_NET_CFG_PHY_EN; 2202 tlan_dio_write16(dev->base_addr, TLAN_NET_CONFIG, (u16) data); 2203 2204 /* 5. Load Ld_Tmr and Ld_Thr in HOST_CMD. */ 2205 2206 outl(TLAN_HC_LD_TMR | 0x3f, dev->base_addr + TLAN_HOST_CMD); 2207 outl(TLAN_HC_LD_THR | 0x9, dev->base_addr + TLAN_HOST_CMD); 2208 2209 /* 6. Unreset the MII by setting NMRST (in NetSio) to 1. */ 2210 2211 outw(TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR); 2212 addr = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO; 2213 tlan_set_bit(TLAN_NET_SIO_NMRST, addr); 2214 2215 /* 7. Setup the remaining registers. */ 2216 2217 if (priv->tlan_rev >= 0x30) { 2218 data8 = TLAN_ID_TX_EOC | TLAN_ID_RX_EOC; 2219 tlan_dio_write8(dev->base_addr, TLAN_INT_DIS, data8); 2220 } 2221 tlan_phy_detect(dev); 2222 data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN; 2223 2224 if (priv->adapter->flags & TLAN_ADAPTER_BIT_RATE_PHY) { 2225 data |= TLAN_NET_CFG_BIT; 2226 if (priv->aui == 1) { 2227 tlan_dio_write8(dev->base_addr, TLAN_ACOMMIT, 0x0a); 2228 } else if (priv->duplex == TLAN_DUPLEX_FULL) { 2229 tlan_dio_write8(dev->base_addr, TLAN_ACOMMIT, 0x00); 2230 priv->tlan_full_duplex = true; 2231 } else { 2232 tlan_dio_write8(dev->base_addr, TLAN_ACOMMIT, 0x08); 2233 } 2234 } 2235 2236 /* don't power down internal PHY if we're going to use it */ 2237 if (priv->phy_num == 0 || 2238 (priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10)) 2239 data |= TLAN_NET_CFG_PHY_EN; 2240 tlan_dio_write16(dev->base_addr, TLAN_NET_CONFIG, (u16) data); 2241 2242 if (priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY) 2243 tlan_finish_reset(dev); 2244 else 2245 tlan_phy_power_down(dev); 2246 2247 } 2248 2249 2250 2251 2252 static void 2253 tlan_finish_reset(struct net_device *dev) 2254 { 2255 struct tlan_priv *priv = netdev_priv(dev); 2256 u8 data; 2257 u32 phy; 2258 u8 sio; 2259 u16 status; 2260 u16 partner; 2261 u16 tlphy_ctl; 2262 u16 tlphy_par; 2263 u16 tlphy_id1, tlphy_id2; 2264 int i; 2265 2266 phy = priv->phy[priv->phy_num]; 2267 2268 data = TLAN_NET_CMD_NRESET | TLAN_NET_CMD_NWRAP; 2269 if (priv->tlan_full_duplex) 2270 data |= TLAN_NET_CMD_DUPLEX; 2271 tlan_dio_write8(dev->base_addr, TLAN_NET_CMD, data); 2272 data = TLAN_NET_MASK_MASK4 | TLAN_NET_MASK_MASK5; 2273 if (priv->phy_num == 0) 2274 data |= TLAN_NET_MASK_MASK7; 2275 tlan_dio_write8(dev->base_addr, TLAN_NET_MASK, data); 2276 tlan_dio_write16(dev->base_addr, TLAN_MAX_RX, ((1536)+7)&~7); 2277 tlan_mii_read_reg(dev, phy, MII_GEN_ID_HI, &tlphy_id1); 2278 tlan_mii_read_reg(dev, phy, MII_GEN_ID_LO, &tlphy_id2); 2279 2280 if ((priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY) || 2281 (priv->aui)) { 2282 status = MII_GS_LINK; 2283 netdev_info(dev, "Link forced\n"); 2284 } else { 2285 tlan_mii_read_reg(dev, phy, MII_GEN_STS, &status); 2286 udelay(1000); 2287 tlan_mii_read_reg(dev, phy, MII_GEN_STS, &status); 2288 if (status & MII_GS_LINK) { 2289 /* We only support link info on Nat.Sem. PHY's */ 2290 if ((tlphy_id1 == NAT_SEM_ID1) && 2291 (tlphy_id2 == NAT_SEM_ID2)) { 2292 tlan_mii_read_reg(dev, phy, MII_AN_LPA, 2293 &partner); 2294 tlan_mii_read_reg(dev, phy, TLAN_TLPHY_PAR, 2295 &tlphy_par); 2296 2297 netdev_info(dev, 2298 "Link active, %s %uMbps %s-Duplex\n", 2299 !(tlphy_par & TLAN_PHY_AN_EN_STAT) 2300 ? "forced" : "Autonegotiation enabled,", 2301 tlphy_par & TLAN_PHY_SPEED_100 2302 ? 100 : 10, 2303 tlphy_par & TLAN_PHY_DUPLEX_FULL 2304 ? "Full" : "Half"); 2305 2306 if (tlphy_par & TLAN_PHY_AN_EN_STAT) { 2307 netdev_info(dev, "Partner capability:"); 2308 for (i = 5; i < 10; i++) 2309 if (partner & (1 << i)) 2310 pr_cont(" %s", 2311 media[i-5]); 2312 pr_cont("\n"); 2313 } 2314 } else 2315 netdev_info(dev, "Link active\n"); 2316 /* Enabling link beat monitoring */ 2317 priv->media_timer.expires = jiffies + HZ; 2318 add_timer(&priv->media_timer); 2319 } 2320 } 2321 2322 if (priv->phy_num == 0) { 2323 tlan_mii_read_reg(dev, phy, TLAN_TLPHY_CTL, &tlphy_ctl); 2324 tlphy_ctl |= TLAN_TC_INTEN; 2325 tlan_mii_write_reg(dev, phy, TLAN_TLPHY_CTL, tlphy_ctl); 2326 sio = tlan_dio_read8(dev->base_addr, TLAN_NET_SIO); 2327 sio |= TLAN_NET_SIO_MINTEN; 2328 tlan_dio_write8(dev->base_addr, TLAN_NET_SIO, sio); 2329 } 2330 2331 if (status & MII_GS_LINK) { 2332 tlan_set_mac(dev, 0, dev->dev_addr); 2333 priv->phy_online = 1; 2334 outb((TLAN_HC_INT_ON >> 8), dev->base_addr + TLAN_HOST_CMD + 1); 2335 if (debug >= 1 && debug != TLAN_DEBUG_PROBE) 2336 outb((TLAN_HC_REQ_INT >> 8), 2337 dev->base_addr + TLAN_HOST_CMD + 1); 2338 outl(priv->rx_list_dma, dev->base_addr + TLAN_CH_PARM); 2339 outl(TLAN_HC_GO | TLAN_HC_RT, dev->base_addr + TLAN_HOST_CMD); 2340 tlan_dio_write8(dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK); 2341 netif_carrier_on(dev); 2342 } else { 2343 netdev_info(dev, "Link inactive, will retry in 10 secs...\n"); 2344 tlan_set_timer(dev, (10*HZ), TLAN_TIMER_FINISH_RESET); 2345 return; 2346 } 2347 tlan_set_multicast_list(dev); 2348 2349 } 2350 2351 2352 2353 2354 /*************************************************************** 2355 * tlan_set_mac 2356 * 2357 * Returns: 2358 * Nothing 2359 * Parms: 2360 * dev Pointer to device structure of adapter 2361 * on which to change the AREG. 2362 * areg The AREG to set the address in (0 - 3). 2363 * mac A pointer to an array of chars. Each 2364 * element stores one byte of the address. 2365 * IE, it isn't in ascii. 2366 * 2367 * This function transfers a MAC address to one of the 2368 * TLAN AREGs (address registers). The TLAN chip locks 2369 * the register on writing to offset 0 and unlocks the 2370 * register after writing to offset 5. If NULL is passed 2371 * in mac, then the AREG is filled with 0's. 2372 * 2373 **************************************************************/ 2374 2375 static void tlan_set_mac(struct net_device *dev, int areg, char *mac) 2376 { 2377 int i; 2378 2379 areg *= 6; 2380 2381 if (mac != NULL) { 2382 for (i = 0; i < 6; i++) 2383 tlan_dio_write8(dev->base_addr, 2384 TLAN_AREG_0 + areg + i, mac[i]); 2385 } else { 2386 for (i = 0; i < 6; i++) 2387 tlan_dio_write8(dev->base_addr, 2388 TLAN_AREG_0 + areg + i, 0); 2389 } 2390 2391 } 2392 2393 2394 2395 2396 /***************************************************************************** 2397 ****************************************************************************** 2398 2399 ThunderLAN driver PHY layer routines 2400 2401 ****************************************************************************** 2402 *****************************************************************************/ 2403 2404 2405 2406 /********************************************************************* 2407 * tlan_phy_print 2408 * 2409 * Returns: 2410 * Nothing 2411 * Parms: 2412 * dev A pointer to the device structure of the 2413 * TLAN device having the PHYs to be detailed. 2414 * 2415 * This function prints the registers a PHY (aka transceiver). 2416 * 2417 ********************************************************************/ 2418 2419 static void tlan_phy_print(struct net_device *dev) 2420 { 2421 struct tlan_priv *priv = netdev_priv(dev); 2422 u16 i, data0, data1, data2, data3, phy; 2423 2424 phy = priv->phy[priv->phy_num]; 2425 2426 if (priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY) { 2427 netdev_info(dev, "Unmanaged PHY\n"); 2428 } else if (phy <= TLAN_PHY_MAX_ADDR) { 2429 netdev_info(dev, "PHY 0x%02x\n", phy); 2430 pr_info(" Off. +0 +1 +2 +3\n"); 2431 for (i = 0; i < 0x20; i += 4) { 2432 tlan_mii_read_reg(dev, phy, i, &data0); 2433 tlan_mii_read_reg(dev, phy, i + 1, &data1); 2434 tlan_mii_read_reg(dev, phy, i + 2, &data2); 2435 tlan_mii_read_reg(dev, phy, i + 3, &data3); 2436 pr_info(" 0x%02x 0x%04hx 0x%04hx 0x%04hx 0x%04hx\n", 2437 i, data0, data1, data2, data3); 2438 } 2439 } else { 2440 netdev_info(dev, "Invalid PHY\n"); 2441 } 2442 2443 } 2444 2445 2446 2447 2448 /********************************************************************* 2449 * tlan_phy_detect 2450 * 2451 * Returns: 2452 * Nothing 2453 * Parms: 2454 * dev A pointer to the device structure of the adapter 2455 * for which the PHY needs determined. 2456 * 2457 * So far I've found that adapters which have external PHYs 2458 * may also use the internal PHY for part of the functionality. 2459 * (eg, AUI/Thinnet). This function finds out if this TLAN 2460 * chip has an internal PHY, and then finds the first external 2461 * PHY (starting from address 0) if it exists). 2462 * 2463 ********************************************************************/ 2464 2465 static void tlan_phy_detect(struct net_device *dev) 2466 { 2467 struct tlan_priv *priv = netdev_priv(dev); 2468 u16 control; 2469 u16 hi; 2470 u16 lo; 2471 u32 phy; 2472 2473 if (priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY) { 2474 priv->phy_num = 0xffff; 2475 return; 2476 } 2477 2478 tlan_mii_read_reg(dev, TLAN_PHY_MAX_ADDR, MII_GEN_ID_HI, &hi); 2479 2480 if (hi != 0xffff) 2481 priv->phy[0] = TLAN_PHY_MAX_ADDR; 2482 else 2483 priv->phy[0] = TLAN_PHY_NONE; 2484 2485 priv->phy[1] = TLAN_PHY_NONE; 2486 for (phy = 0; phy <= TLAN_PHY_MAX_ADDR; phy++) { 2487 tlan_mii_read_reg(dev, phy, MII_GEN_CTL, &control); 2488 tlan_mii_read_reg(dev, phy, MII_GEN_ID_HI, &hi); 2489 tlan_mii_read_reg(dev, phy, MII_GEN_ID_LO, &lo); 2490 if ((control != 0xffff) || 2491 (hi != 0xffff) || (lo != 0xffff)) { 2492 TLAN_DBG(TLAN_DEBUG_GNRL, 2493 "PHY found at %02x %04x %04x %04x\n", 2494 phy, control, hi, lo); 2495 if ((priv->phy[1] == TLAN_PHY_NONE) && 2496 (phy != TLAN_PHY_MAX_ADDR)) { 2497 priv->phy[1] = phy; 2498 } 2499 } 2500 } 2501 2502 if (priv->phy[1] != TLAN_PHY_NONE) 2503 priv->phy_num = 1; 2504 else if (priv->phy[0] != TLAN_PHY_NONE) 2505 priv->phy_num = 0; 2506 else 2507 netdev_info(dev, "Cannot initialize device, no PHY was found!\n"); 2508 2509 } 2510 2511 2512 2513 2514 static void tlan_phy_power_down(struct net_device *dev) 2515 { 2516 struct tlan_priv *priv = netdev_priv(dev); 2517 u16 value; 2518 2519 TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Powering down PHY(s).\n", dev->name); 2520 value = MII_GC_PDOWN | MII_GC_LOOPBK | MII_GC_ISOLATE; 2521 tlan_mii_sync(dev->base_addr); 2522 tlan_mii_write_reg(dev, priv->phy[priv->phy_num], MII_GEN_CTL, value); 2523 if ((priv->phy_num == 0) && (priv->phy[1] != TLAN_PHY_NONE)) { 2524 /* if using internal PHY, the external PHY must be powered on */ 2525 if (priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10) 2526 value = MII_GC_ISOLATE; /* just isolate it from MII */ 2527 tlan_mii_sync(dev->base_addr); 2528 tlan_mii_write_reg(dev, priv->phy[1], MII_GEN_CTL, value); 2529 } 2530 2531 /* Wait for 50 ms and powerup 2532 * This is abitrary. It is intended to make sure the 2533 * transceiver settles. 2534 */ 2535 tlan_set_timer(dev, msecs_to_jiffies(50), TLAN_TIMER_PHY_PUP); 2536 2537 } 2538 2539 2540 2541 2542 static void tlan_phy_power_up(struct net_device *dev) 2543 { 2544 struct tlan_priv *priv = netdev_priv(dev); 2545 u16 value; 2546 2547 TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Powering up PHY.\n", dev->name); 2548 tlan_mii_sync(dev->base_addr); 2549 value = MII_GC_LOOPBK; 2550 tlan_mii_write_reg(dev, priv->phy[priv->phy_num], MII_GEN_CTL, value); 2551 tlan_mii_sync(dev->base_addr); 2552 /* Wait for 500 ms and reset the 2553 * transceiver. The TLAN docs say both 50 ms and 2554 * 500 ms, so do the longer, just in case. 2555 */ 2556 tlan_set_timer(dev, msecs_to_jiffies(500), TLAN_TIMER_PHY_RESET); 2557 2558 } 2559 2560 2561 2562 2563 static void tlan_phy_reset(struct net_device *dev) 2564 { 2565 struct tlan_priv *priv = netdev_priv(dev); 2566 u16 phy; 2567 u16 value; 2568 unsigned long timeout = jiffies + HZ; 2569 2570 phy = priv->phy[priv->phy_num]; 2571 2572 TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Resetting PHY.\n", dev->name); 2573 tlan_mii_sync(dev->base_addr); 2574 value = MII_GC_LOOPBK | MII_GC_RESET; 2575 tlan_mii_write_reg(dev, phy, MII_GEN_CTL, value); 2576 do { 2577 tlan_mii_read_reg(dev, phy, MII_GEN_CTL, &value); 2578 if (time_after(jiffies, timeout)) { 2579 netdev_err(dev, "PHY reset timeout\n"); 2580 return; 2581 } 2582 } while (value & MII_GC_RESET); 2583 2584 /* Wait for 500 ms and initialize. 2585 * I don't remember why I wait this long. 2586 * I've changed this to 50ms, as it seems long enough. 2587 */ 2588 tlan_set_timer(dev, msecs_to_jiffies(50), TLAN_TIMER_PHY_START_LINK); 2589 2590 } 2591 2592 2593 2594 2595 static void tlan_phy_start_link(struct net_device *dev) 2596 { 2597 struct tlan_priv *priv = netdev_priv(dev); 2598 u16 ability; 2599 u16 control; 2600 u16 data; 2601 u16 phy; 2602 u16 status; 2603 u16 tctl; 2604 2605 phy = priv->phy[priv->phy_num]; 2606 TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Trying to activate link.\n", dev->name); 2607 tlan_mii_read_reg(dev, phy, MII_GEN_STS, &status); 2608 tlan_mii_read_reg(dev, phy, MII_GEN_STS, &ability); 2609 2610 if ((status & MII_GS_AUTONEG) && 2611 (!priv->aui)) { 2612 ability = status >> 11; 2613 if (priv->speed == TLAN_SPEED_10 && 2614 priv->duplex == TLAN_DUPLEX_HALF) { 2615 tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x0000); 2616 } else if (priv->speed == TLAN_SPEED_10 && 2617 priv->duplex == TLAN_DUPLEX_FULL) { 2618 priv->tlan_full_duplex = true; 2619 tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x0100); 2620 } else if (priv->speed == TLAN_SPEED_100 && 2621 priv->duplex == TLAN_DUPLEX_HALF) { 2622 tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x2000); 2623 } else if (priv->speed == TLAN_SPEED_100 && 2624 priv->duplex == TLAN_DUPLEX_FULL) { 2625 priv->tlan_full_duplex = true; 2626 tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x2100); 2627 } else { 2628 2629 /* Set Auto-Neg advertisement */ 2630 tlan_mii_write_reg(dev, phy, MII_AN_ADV, 2631 (ability << 5) | 1); 2632 /* Enablee Auto-Neg */ 2633 tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x1000); 2634 /* Restart Auto-Neg */ 2635 tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x1200); 2636 /* Wait for 4 sec for autonegotiation 2637 * to complete. The max spec time is less than this 2638 * but the card need additional time to start AN. 2639 * .5 sec should be plenty extra. 2640 */ 2641 netdev_info(dev, "Starting autonegotiation\n"); 2642 tlan_set_timer(dev, (2*HZ), TLAN_TIMER_PHY_FINISH_AN); 2643 return; 2644 } 2645 2646 } 2647 2648 if ((priv->aui) && (priv->phy_num != 0)) { 2649 priv->phy_num = 0; 2650 data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN 2651 | TLAN_NET_CFG_PHY_EN; 2652 tlan_dio_write16(dev->base_addr, TLAN_NET_CONFIG, data); 2653 tlan_set_timer(dev, msecs_to_jiffies(40), TLAN_TIMER_PHY_PDOWN); 2654 return; 2655 } else if (priv->phy_num == 0) { 2656 control = 0; 2657 tlan_mii_read_reg(dev, phy, TLAN_TLPHY_CTL, &tctl); 2658 if (priv->aui) { 2659 tctl |= TLAN_TC_AUISEL; 2660 } else { 2661 tctl &= ~TLAN_TC_AUISEL; 2662 if (priv->duplex == TLAN_DUPLEX_FULL) { 2663 control |= MII_GC_DUPLEX; 2664 priv->tlan_full_duplex = true; 2665 } 2666 if (priv->speed == TLAN_SPEED_100) 2667 control |= MII_GC_SPEEDSEL; 2668 } 2669 tlan_mii_write_reg(dev, phy, MII_GEN_CTL, control); 2670 tlan_mii_write_reg(dev, phy, TLAN_TLPHY_CTL, tctl); 2671 } 2672 2673 /* Wait for 2 sec to give the transceiver time 2674 * to establish link. 2675 */ 2676 tlan_set_timer(dev, (4*HZ), TLAN_TIMER_FINISH_RESET); 2677 2678 } 2679 2680 2681 2682 2683 static void tlan_phy_finish_auto_neg(struct net_device *dev) 2684 { 2685 struct tlan_priv *priv = netdev_priv(dev); 2686 u16 an_adv; 2687 u16 an_lpa; 2688 u16 mode; 2689 u16 phy; 2690 u16 status; 2691 2692 phy = priv->phy[priv->phy_num]; 2693 2694 tlan_mii_read_reg(dev, phy, MII_GEN_STS, &status); 2695 udelay(1000); 2696 tlan_mii_read_reg(dev, phy, MII_GEN_STS, &status); 2697 2698 if (!(status & MII_GS_AUTOCMPLT)) { 2699 /* Wait for 8 sec to give the process 2700 * more time. Perhaps we should fail after a while. 2701 */ 2702 tlan_set_timer(dev, 2 * HZ, TLAN_TIMER_PHY_FINISH_AN); 2703 return; 2704 } 2705 2706 netdev_info(dev, "Autonegotiation complete\n"); 2707 tlan_mii_read_reg(dev, phy, MII_AN_ADV, &an_adv); 2708 tlan_mii_read_reg(dev, phy, MII_AN_LPA, &an_lpa); 2709 mode = an_adv & an_lpa & 0x03E0; 2710 if (mode & 0x0100) 2711 priv->tlan_full_duplex = true; 2712 else if (!(mode & 0x0080) && (mode & 0x0040)) 2713 priv->tlan_full_duplex = true; 2714 2715 /* switch to internal PHY for 10 Mbps */ 2716 if ((!(mode & 0x0180)) && 2717 (priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10) && 2718 (priv->phy_num != 0)) { 2719 priv->phy_num = 0; 2720 tlan_set_timer(dev, msecs_to_jiffies(400), TLAN_TIMER_PHY_PDOWN); 2721 return; 2722 } 2723 2724 if (priv->phy_num == 0) { 2725 if ((priv->duplex == TLAN_DUPLEX_FULL) || 2726 (an_adv & an_lpa & 0x0040)) { 2727 tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 2728 MII_GC_AUTOENB | MII_GC_DUPLEX); 2729 netdev_info(dev, "Starting internal PHY with FULL-DUPLEX\n"); 2730 } else { 2731 tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 2732 MII_GC_AUTOENB); 2733 netdev_info(dev, "Starting internal PHY with HALF-DUPLEX\n"); 2734 } 2735 } 2736 2737 /* Wait for 100 ms. No reason in partiticular. 2738 */ 2739 tlan_set_timer(dev, msecs_to_jiffies(100), TLAN_TIMER_FINISH_RESET); 2740 2741 } 2742 2743 2744 /********************************************************************* 2745 * 2746 * tlan_phy_monitor 2747 * 2748 * Returns: 2749 * None 2750 * 2751 * Params: 2752 * data The device structure of this device. 2753 * 2754 * 2755 * This function monitors PHY condition by reading the status 2756 * register via the MII bus, controls LINK LED and notifies the 2757 * kernel about link state. 2758 * 2759 *******************************************************************/ 2760 2761 static void tlan_phy_monitor(struct timer_list *t) 2762 { 2763 struct tlan_priv *priv = from_timer(priv, t, media_timer); 2764 struct net_device *dev = priv->dev; 2765 u16 phy; 2766 u16 phy_status; 2767 2768 phy = priv->phy[priv->phy_num]; 2769 2770 /* Get PHY status register */ 2771 tlan_mii_read_reg(dev, phy, MII_GEN_STS, &phy_status); 2772 2773 /* Check if link has been lost */ 2774 if (!(phy_status & MII_GS_LINK)) { 2775 if (netif_carrier_ok(dev)) { 2776 printk(KERN_DEBUG "TLAN: %s has lost link\n", 2777 dev->name); 2778 tlan_dio_write8(dev->base_addr, TLAN_LED_REG, 0); 2779 netif_carrier_off(dev); 2780 if (priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10) { 2781 /* power down internal PHY */ 2782 u16 data = MII_GC_PDOWN | MII_GC_LOOPBK | 2783 MII_GC_ISOLATE; 2784 2785 tlan_mii_sync(dev->base_addr); 2786 tlan_mii_write_reg(dev, priv->phy[0], 2787 MII_GEN_CTL, data); 2788 /* set to external PHY */ 2789 priv->phy_num = 1; 2790 /* restart autonegotiation */ 2791 tlan_set_timer(dev, msecs_to_jiffies(400), 2792 TLAN_TIMER_PHY_PDOWN); 2793 return; 2794 } 2795 } 2796 } 2797 2798 /* Link restablished? */ 2799 if ((phy_status & MII_GS_LINK) && !netif_carrier_ok(dev)) { 2800 tlan_dio_write8(dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK); 2801 printk(KERN_DEBUG "TLAN: %s has reestablished link\n", 2802 dev->name); 2803 netif_carrier_on(dev); 2804 } 2805 priv->media_timer.expires = jiffies + HZ; 2806 add_timer(&priv->media_timer); 2807 } 2808 2809 2810 /***************************************************************************** 2811 ****************************************************************************** 2812 2813 ThunderLAN driver MII routines 2814 2815 these routines are based on the information in chap. 2 of the 2816 "ThunderLAN Programmer's Guide", pp. 15-24. 2817 2818 ****************************************************************************** 2819 *****************************************************************************/ 2820 2821 2822 /*************************************************************** 2823 * tlan_mii_read_reg 2824 * 2825 * Returns: 2826 * false if ack received ok 2827 * true if no ack received or other error 2828 * 2829 * Parms: 2830 * dev The device structure containing 2831 * The io address and interrupt count 2832 * for this device. 2833 * phy The address of the PHY to be queried. 2834 * reg The register whose contents are to be 2835 * retrieved. 2836 * val A pointer to a variable to store the 2837 * retrieved value. 2838 * 2839 * This function uses the TLAN's MII bus to retrieve the contents 2840 * of a given register on a PHY. It sends the appropriate info 2841 * and then reads the 16-bit register value from the MII bus via 2842 * the TLAN SIO register. 2843 * 2844 **************************************************************/ 2845 2846 static bool 2847 tlan_mii_read_reg(struct net_device *dev, u16 phy, u16 reg, u16 *val) 2848 { 2849 u8 nack; 2850 u16 sio, tmp; 2851 u32 i; 2852 bool err; 2853 int minten; 2854 struct tlan_priv *priv = netdev_priv(dev); 2855 unsigned long flags = 0; 2856 2857 err = false; 2858 outw(TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR); 2859 sio = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO; 2860 2861 if (!in_irq()) 2862 spin_lock_irqsave(&priv->lock, flags); 2863 2864 tlan_mii_sync(dev->base_addr); 2865 2866 minten = tlan_get_bit(TLAN_NET_SIO_MINTEN, sio); 2867 if (minten) 2868 tlan_clear_bit(TLAN_NET_SIO_MINTEN, sio); 2869 2870 tlan_mii_send_data(dev->base_addr, 0x1, 2); /* start (01b) */ 2871 tlan_mii_send_data(dev->base_addr, 0x2, 2); /* read (10b) */ 2872 tlan_mii_send_data(dev->base_addr, phy, 5); /* device # */ 2873 tlan_mii_send_data(dev->base_addr, reg, 5); /* register # */ 2874 2875 2876 tlan_clear_bit(TLAN_NET_SIO_MTXEN, sio); /* change direction */ 2877 2878 tlan_clear_bit(TLAN_NET_SIO_MCLK, sio); /* clock idle bit */ 2879 tlan_set_bit(TLAN_NET_SIO_MCLK, sio); 2880 tlan_clear_bit(TLAN_NET_SIO_MCLK, sio); /* wait 300ns */ 2881 2882 nack = tlan_get_bit(TLAN_NET_SIO_MDATA, sio); /* check for ACK */ 2883 tlan_set_bit(TLAN_NET_SIO_MCLK, sio); /* finish ACK */ 2884 if (nack) { /* no ACK, so fake it */ 2885 for (i = 0; i < 16; i++) { 2886 tlan_clear_bit(TLAN_NET_SIO_MCLK, sio); 2887 tlan_set_bit(TLAN_NET_SIO_MCLK, sio); 2888 } 2889 tmp = 0xffff; 2890 err = true; 2891 } else { /* ACK, so read data */ 2892 for (tmp = 0, i = 0x8000; i; i >>= 1) { 2893 tlan_clear_bit(TLAN_NET_SIO_MCLK, sio); 2894 if (tlan_get_bit(TLAN_NET_SIO_MDATA, sio)) 2895 tmp |= i; 2896 tlan_set_bit(TLAN_NET_SIO_MCLK, sio); 2897 } 2898 } 2899 2900 2901 tlan_clear_bit(TLAN_NET_SIO_MCLK, sio); /* idle cycle */ 2902 tlan_set_bit(TLAN_NET_SIO_MCLK, sio); 2903 2904 if (minten) 2905 tlan_set_bit(TLAN_NET_SIO_MINTEN, sio); 2906 2907 *val = tmp; 2908 2909 if (!in_irq()) 2910 spin_unlock_irqrestore(&priv->lock, flags); 2911 2912 return err; 2913 2914 } 2915 2916 2917 2918 2919 /*************************************************************** 2920 * tlan_mii_send_data 2921 * 2922 * Returns: 2923 * Nothing 2924 * Parms: 2925 * base_port The base IO port of the adapter in 2926 * question. 2927 * dev The address of the PHY to be queried. 2928 * data The value to be placed on the MII bus. 2929 * num_bits The number of bits in data that are to 2930 * be placed on the MII bus. 2931 * 2932 * This function sends on sequence of bits on the MII 2933 * configuration bus. 2934 * 2935 **************************************************************/ 2936 2937 static void tlan_mii_send_data(u16 base_port, u32 data, unsigned num_bits) 2938 { 2939 u16 sio; 2940 u32 i; 2941 2942 if (num_bits == 0) 2943 return; 2944 2945 outw(TLAN_NET_SIO, base_port + TLAN_DIO_ADR); 2946 sio = base_port + TLAN_DIO_DATA + TLAN_NET_SIO; 2947 tlan_set_bit(TLAN_NET_SIO_MTXEN, sio); 2948 2949 for (i = (0x1 << (num_bits - 1)); i; i >>= 1) { 2950 tlan_clear_bit(TLAN_NET_SIO_MCLK, sio); 2951 (void) tlan_get_bit(TLAN_NET_SIO_MCLK, sio); 2952 if (data & i) 2953 tlan_set_bit(TLAN_NET_SIO_MDATA, sio); 2954 else 2955 tlan_clear_bit(TLAN_NET_SIO_MDATA, sio); 2956 tlan_set_bit(TLAN_NET_SIO_MCLK, sio); 2957 (void) tlan_get_bit(TLAN_NET_SIO_MCLK, sio); 2958 } 2959 2960 } 2961 2962 2963 2964 2965 /*************************************************************** 2966 * TLan_MiiSync 2967 * 2968 * Returns: 2969 * Nothing 2970 * Parms: 2971 * base_port The base IO port of the adapter in 2972 * question. 2973 * 2974 * This functions syncs all PHYs in terms of the MII configuration 2975 * bus. 2976 * 2977 **************************************************************/ 2978 2979 static void tlan_mii_sync(u16 base_port) 2980 { 2981 int i; 2982 u16 sio; 2983 2984 outw(TLAN_NET_SIO, base_port + TLAN_DIO_ADR); 2985 sio = base_port + TLAN_DIO_DATA + TLAN_NET_SIO; 2986 2987 tlan_clear_bit(TLAN_NET_SIO_MTXEN, sio); 2988 for (i = 0; i < 32; i++) { 2989 tlan_clear_bit(TLAN_NET_SIO_MCLK, sio); 2990 tlan_set_bit(TLAN_NET_SIO_MCLK, sio); 2991 } 2992 2993 } 2994 2995 2996 2997 2998 /*************************************************************** 2999 * tlan_mii_write_reg 3000 * 3001 * Returns: 3002 * Nothing 3003 * Parms: 3004 * dev The device structure for the device 3005 * to write to. 3006 * phy The address of the PHY to be written to. 3007 * reg The register whose contents are to be 3008 * written. 3009 * val The value to be written to the register. 3010 * 3011 * This function uses the TLAN's MII bus to write the contents of a 3012 * given register on a PHY. It sends the appropriate info and then 3013 * writes the 16-bit register value from the MII configuration bus 3014 * via the TLAN SIO register. 3015 * 3016 **************************************************************/ 3017 3018 static void 3019 tlan_mii_write_reg(struct net_device *dev, u16 phy, u16 reg, u16 val) 3020 { 3021 u16 sio; 3022 int minten; 3023 unsigned long flags = 0; 3024 struct tlan_priv *priv = netdev_priv(dev); 3025 3026 outw(TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR); 3027 sio = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO; 3028 3029 if (!in_irq()) 3030 spin_lock_irqsave(&priv->lock, flags); 3031 3032 tlan_mii_sync(dev->base_addr); 3033 3034 minten = tlan_get_bit(TLAN_NET_SIO_MINTEN, sio); 3035 if (minten) 3036 tlan_clear_bit(TLAN_NET_SIO_MINTEN, sio); 3037 3038 tlan_mii_send_data(dev->base_addr, 0x1, 2); /* start (01b) */ 3039 tlan_mii_send_data(dev->base_addr, 0x1, 2); /* write (01b) */ 3040 tlan_mii_send_data(dev->base_addr, phy, 5); /* device # */ 3041 tlan_mii_send_data(dev->base_addr, reg, 5); /* register # */ 3042 3043 tlan_mii_send_data(dev->base_addr, 0x2, 2); /* send ACK */ 3044 tlan_mii_send_data(dev->base_addr, val, 16); /* send data */ 3045 3046 tlan_clear_bit(TLAN_NET_SIO_MCLK, sio); /* idle cycle */ 3047 tlan_set_bit(TLAN_NET_SIO_MCLK, sio); 3048 3049 if (minten) 3050 tlan_set_bit(TLAN_NET_SIO_MINTEN, sio); 3051 3052 if (!in_irq()) 3053 spin_unlock_irqrestore(&priv->lock, flags); 3054 3055 } 3056 3057 3058 3059 3060 /***************************************************************************** 3061 ****************************************************************************** 3062 3063 ThunderLAN driver eeprom routines 3064 3065 the Compaq netelligent 10 and 10/100 cards use a microchip 24C02A 3066 EEPROM. these functions are based on information in microchip's 3067 data sheet. I don't know how well this functions will work with 3068 other Eeproms. 3069 3070 ****************************************************************************** 3071 *****************************************************************************/ 3072 3073 3074 /*************************************************************** 3075 * tlan_ee_send_start 3076 * 3077 * Returns: 3078 * Nothing 3079 * Parms: 3080 * io_base The IO port base address for the 3081 * TLAN device with the EEPROM to 3082 * use. 3083 * 3084 * This function sends a start cycle to an EEPROM attached 3085 * to a TLAN chip. 3086 * 3087 **************************************************************/ 3088 3089 static void tlan_ee_send_start(u16 io_base) 3090 { 3091 u16 sio; 3092 3093 outw(TLAN_NET_SIO, io_base + TLAN_DIO_ADR); 3094 sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO; 3095 3096 tlan_set_bit(TLAN_NET_SIO_ECLOK, sio); 3097 tlan_set_bit(TLAN_NET_SIO_EDATA, sio); 3098 tlan_set_bit(TLAN_NET_SIO_ETXEN, sio); 3099 tlan_clear_bit(TLAN_NET_SIO_EDATA, sio); 3100 tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio); 3101 3102 } 3103 3104 3105 3106 3107 /*************************************************************** 3108 * tlan_ee_send_byte 3109 * 3110 * Returns: 3111 * If the correct ack was received, 0, otherwise 1 3112 * Parms: io_base The IO port base address for the 3113 * TLAN device with the EEPROM to 3114 * use. 3115 * data The 8 bits of information to 3116 * send to the EEPROM. 3117 * stop If TLAN_EEPROM_STOP is passed, a 3118 * stop cycle is sent after the 3119 * byte is sent after the ack is 3120 * read. 3121 * 3122 * This function sends a byte on the serial EEPROM line, 3123 * driving the clock to send each bit. The function then 3124 * reverses transmission direction and reads an acknowledge 3125 * bit. 3126 * 3127 **************************************************************/ 3128 3129 static int tlan_ee_send_byte(u16 io_base, u8 data, int stop) 3130 { 3131 int err; 3132 u8 place; 3133 u16 sio; 3134 3135 outw(TLAN_NET_SIO, io_base + TLAN_DIO_ADR); 3136 sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO; 3137 3138 /* Assume clock is low, tx is enabled; */ 3139 for (place = 0x80; place != 0; place >>= 1) { 3140 if (place & data) 3141 tlan_set_bit(TLAN_NET_SIO_EDATA, sio); 3142 else 3143 tlan_clear_bit(TLAN_NET_SIO_EDATA, sio); 3144 tlan_set_bit(TLAN_NET_SIO_ECLOK, sio); 3145 tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio); 3146 } 3147 tlan_clear_bit(TLAN_NET_SIO_ETXEN, sio); 3148 tlan_set_bit(TLAN_NET_SIO_ECLOK, sio); 3149 err = tlan_get_bit(TLAN_NET_SIO_EDATA, sio); 3150 tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio); 3151 tlan_set_bit(TLAN_NET_SIO_ETXEN, sio); 3152 3153 if ((!err) && stop) { 3154 /* STOP, raise data while clock is high */ 3155 tlan_clear_bit(TLAN_NET_SIO_EDATA, sio); 3156 tlan_set_bit(TLAN_NET_SIO_ECLOK, sio); 3157 tlan_set_bit(TLAN_NET_SIO_EDATA, sio); 3158 } 3159 3160 return err; 3161 3162 } 3163 3164 3165 3166 3167 /*************************************************************** 3168 * tlan_ee_receive_byte 3169 * 3170 * Returns: 3171 * Nothing 3172 * Parms: 3173 * io_base The IO port base address for the 3174 * TLAN device with the EEPROM to 3175 * use. 3176 * data An address to a char to hold the 3177 * data sent from the EEPROM. 3178 * stop If TLAN_EEPROM_STOP is passed, a 3179 * stop cycle is sent after the 3180 * byte is received, and no ack is 3181 * sent. 3182 * 3183 * This function receives 8 bits of data from the EEPROM 3184 * over the serial link. It then sends and ack bit, or no 3185 * ack and a stop bit. This function is used to retrieve 3186 * data after the address of a byte in the EEPROM has been 3187 * sent. 3188 * 3189 **************************************************************/ 3190 3191 static void tlan_ee_receive_byte(u16 io_base, u8 *data, int stop) 3192 { 3193 u8 place; 3194 u16 sio; 3195 3196 outw(TLAN_NET_SIO, io_base + TLAN_DIO_ADR); 3197 sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO; 3198 *data = 0; 3199 3200 /* Assume clock is low, tx is enabled; */ 3201 tlan_clear_bit(TLAN_NET_SIO_ETXEN, sio); 3202 for (place = 0x80; place; place >>= 1) { 3203 tlan_set_bit(TLAN_NET_SIO_ECLOK, sio); 3204 if (tlan_get_bit(TLAN_NET_SIO_EDATA, sio)) 3205 *data |= place; 3206 tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio); 3207 } 3208 3209 tlan_set_bit(TLAN_NET_SIO_ETXEN, sio); 3210 if (!stop) { 3211 tlan_clear_bit(TLAN_NET_SIO_EDATA, sio); /* ack = 0 */ 3212 tlan_set_bit(TLAN_NET_SIO_ECLOK, sio); 3213 tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio); 3214 } else { 3215 tlan_set_bit(TLAN_NET_SIO_EDATA, sio); /* no ack = 1 (?) */ 3216 tlan_set_bit(TLAN_NET_SIO_ECLOK, sio); 3217 tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio); 3218 /* STOP, raise data while clock is high */ 3219 tlan_clear_bit(TLAN_NET_SIO_EDATA, sio); 3220 tlan_set_bit(TLAN_NET_SIO_ECLOK, sio); 3221 tlan_set_bit(TLAN_NET_SIO_EDATA, sio); 3222 } 3223 3224 } 3225 3226 3227 3228 3229 /*************************************************************** 3230 * tlan_ee_read_byte 3231 * 3232 * Returns: 3233 * No error = 0, else, the stage at which the error 3234 * occurred. 3235 * Parms: 3236 * io_base The IO port base address for the 3237 * TLAN device with the EEPROM to 3238 * use. 3239 * ee_addr The address of the byte in the 3240 * EEPROM whose contents are to be 3241 * retrieved. 3242 * data An address to a char to hold the 3243 * data obtained from the EEPROM. 3244 * 3245 * This function reads a byte of information from an byte 3246 * cell in the EEPROM. 3247 * 3248 **************************************************************/ 3249 3250 static int tlan_ee_read_byte(struct net_device *dev, u8 ee_addr, u8 *data) 3251 { 3252 int err; 3253 struct tlan_priv *priv = netdev_priv(dev); 3254 unsigned long flags = 0; 3255 int ret = 0; 3256 3257 spin_lock_irqsave(&priv->lock, flags); 3258 3259 tlan_ee_send_start(dev->base_addr); 3260 err = tlan_ee_send_byte(dev->base_addr, 0xa0, TLAN_EEPROM_ACK); 3261 if (err) { 3262 ret = 1; 3263 goto fail; 3264 } 3265 err = tlan_ee_send_byte(dev->base_addr, ee_addr, TLAN_EEPROM_ACK); 3266 if (err) { 3267 ret = 2; 3268 goto fail; 3269 } 3270 tlan_ee_send_start(dev->base_addr); 3271 err = tlan_ee_send_byte(dev->base_addr, 0xa1, TLAN_EEPROM_ACK); 3272 if (err) { 3273 ret = 3; 3274 goto fail; 3275 } 3276 tlan_ee_receive_byte(dev->base_addr, data, TLAN_EEPROM_STOP); 3277 fail: 3278 spin_unlock_irqrestore(&priv->lock, flags); 3279 3280 return ret; 3281 3282 } 3283 3284 3285 3286