1 // SPDX-License-Identifier: GPL-2.0
2 /* ICSSG Ethernet driver
3  *
4  * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com
5  */
6 
7 #include <linux/iopoll.h>
8 #include <linux/regmap.h>
9 #include <uapi/linux/if_ether.h>
10 #include "icssg_config.h"
11 #include "icssg_prueth.h"
12 #include "icssg_switch_map.h"
13 #include "icssg_mii_rt.h"
14 
15 /* TX IPG Values to be set for 100M link speed. These values are
16  * in ocp_clk cycles. So need change if ocp_clk is changed for a specific
17  * h/w design.
18  */
19 
20 /* IPG is in core_clk cycles */
21 #define MII_RT_TX_IPG_100M	0x17
22 #define MII_RT_TX_IPG_1G	0xb
23 
24 #define	ICSSG_QUEUES_MAX		64
25 #define	ICSSG_QUEUE_OFFSET		0xd00
26 #define	ICSSG_QUEUE_PEEK_OFFSET		0xe00
27 #define	ICSSG_QUEUE_CNT_OFFSET		0xe40
28 #define	ICSSG_QUEUE_RESET_OFFSET	0xf40
29 
30 #define	ICSSG_NUM_TX_QUEUES	8
31 
32 #define	RECYCLE_Q_SLICE0	16
33 #define	RECYCLE_Q_SLICE1	17
34 
35 #define	ICSSG_NUM_OTHER_QUEUES	5	/* port, host and special queues */
36 
37 #define	PORT_HI_Q_SLICE0	32
38 #define	PORT_LO_Q_SLICE0	33
39 #define	HOST_HI_Q_SLICE0	34
40 #define	HOST_LO_Q_SLICE0	35
41 #define	HOST_SPL_Q_SLICE0	40	/* Special Queue */
42 
43 #define	PORT_HI_Q_SLICE1	36
44 #define	PORT_LO_Q_SLICE1	37
45 #define	HOST_HI_Q_SLICE1	38
46 #define	HOST_LO_Q_SLICE1	39
47 #define	HOST_SPL_Q_SLICE1	41	/* Special Queue */
48 
49 #define MII_RXCFG_DEFAULT	(PRUSS_MII_RT_RXCFG_RX_ENABLE | \
50 				 PRUSS_MII_RT_RXCFG_RX_DATA_RDY_MODE_DIS | \
51 				 PRUSS_MII_RT_RXCFG_RX_L2_EN | \
52 				 PRUSS_MII_RT_RXCFG_RX_L2_EOF_SCLR_DIS)
53 
54 #define MII_TXCFG_DEFAULT	(PRUSS_MII_RT_TXCFG_TX_ENABLE | \
55 				 PRUSS_MII_RT_TXCFG_TX_AUTO_PREAMBLE | \
56 				 PRUSS_MII_RT_TXCFG_TX_32_MODE_EN | \
57 				 PRUSS_MII_RT_TXCFG_TX_IPG_WIRE_CLK_EN)
58 
59 #define ICSSG_CFG_DEFAULT	(ICSSG_CFG_TX_L1_EN | \
60 				 ICSSG_CFG_TX_L2_EN | ICSSG_CFG_RX_L2_G_EN | \
61 				 ICSSG_CFG_TX_PRU_EN | \
62 				 ICSSG_CFG_SGMII_MODE)
63 
64 #define FDB_GEN_CFG1		0x60
65 #define SMEM_VLAN_OFFSET	8
66 #define SMEM_VLAN_OFFSET_MASK	GENMASK(25, 8)
67 
68 #define FDB_GEN_CFG2		0x64
69 #define FDB_VLAN_EN		BIT(6)
70 #define FDB_HOST_EN		BIT(2)
71 #define FDB_PRU1_EN		BIT(1)
72 #define FDB_PRU0_EN		BIT(0)
73 #define FDB_EN_ALL		(FDB_PRU0_EN | FDB_PRU1_EN | \
74 				 FDB_HOST_EN | FDB_VLAN_EN)
75 
76 /**
77  * struct map - ICSSG Queue Map
78  * @queue: Queue number
79  * @pd_addr_start: Packet descriptor queue reserved memory
80  * @flags: Flags
81  * @special: Indicates whether this queue is a special queue or not
82  */
83 struct map {
84 	int queue;
85 	u32 pd_addr_start;
86 	u32 flags;
87 	bool special;
88 };
89 
90 /* Hardware queue map for ICSSG */
91 static const struct map hwq_map[2][ICSSG_NUM_OTHER_QUEUES] = {
92 	{
93 		{ PORT_HI_Q_SLICE0, PORT_DESC0_HI, 0x200000, 0 },
94 		{ PORT_LO_Q_SLICE0, PORT_DESC0_LO, 0, 0 },
95 		{ HOST_HI_Q_SLICE0, HOST_DESC0_HI, 0x200000, 0 },
96 		{ HOST_LO_Q_SLICE0, HOST_DESC0_LO, 0, 0 },
97 		{ HOST_SPL_Q_SLICE0, HOST_SPPD0, 0x400000, 1 },
98 	},
99 	{
100 		{ PORT_HI_Q_SLICE1, PORT_DESC1_HI, 0xa00000, 0 },
101 		{ PORT_LO_Q_SLICE1, PORT_DESC1_LO, 0x800000, 0 },
102 		{ HOST_HI_Q_SLICE1, HOST_DESC1_HI, 0xa00000, 0 },
103 		{ HOST_LO_Q_SLICE1, HOST_DESC1_LO, 0x800000, 0 },
104 		{ HOST_SPL_Q_SLICE1, HOST_SPPD1, 0xc00000, 1 },
105 	},
106 };
107 
108 static void icssg_config_mii_init(struct prueth_emac *emac)
109 {
110 	u32 rxcfg, txcfg, rxcfg_reg, txcfg_reg, pcnt_reg;
111 	struct prueth *prueth = emac->prueth;
112 	int slice = prueth_emac_slice(emac);
113 	struct regmap *mii_rt;
114 
115 	mii_rt = prueth->mii_rt;
116 
117 	rxcfg_reg = (slice == ICSS_MII0) ? PRUSS_MII_RT_RXCFG0 :
118 				       PRUSS_MII_RT_RXCFG1;
119 	txcfg_reg = (slice == ICSS_MII0) ? PRUSS_MII_RT_TXCFG0 :
120 				       PRUSS_MII_RT_TXCFG1;
121 	pcnt_reg = (slice == ICSS_MII0) ? PRUSS_MII_RT_RX_PCNT0 :
122 				       PRUSS_MII_RT_RX_PCNT1;
123 
124 	rxcfg = MII_RXCFG_DEFAULT;
125 	txcfg = MII_TXCFG_DEFAULT;
126 
127 	if (slice == ICSS_MII1)
128 		rxcfg |= PRUSS_MII_RT_RXCFG_RX_MUX_SEL;
129 
130 	/* In MII mode TX lines swapped inside ICSSG, so TX_MUX_SEL cfg need
131 	 * to be swapped also comparing to RGMII mode.
132 	 */
133 	if (emac->phy_if == PHY_INTERFACE_MODE_MII && slice == ICSS_MII0)
134 		txcfg |= PRUSS_MII_RT_TXCFG_TX_MUX_SEL;
135 	else if (emac->phy_if != PHY_INTERFACE_MODE_MII && slice == ICSS_MII1)
136 		txcfg |= PRUSS_MII_RT_TXCFG_TX_MUX_SEL;
137 
138 	regmap_write(mii_rt, rxcfg_reg, rxcfg);
139 	regmap_write(mii_rt, txcfg_reg, txcfg);
140 	regmap_write(mii_rt, pcnt_reg, 0x1);
141 }
142 
143 static void icssg_miig_queues_init(struct prueth *prueth, int slice)
144 {
145 	struct regmap *miig_rt = prueth->miig_rt;
146 	void __iomem *smem = prueth->shram.va;
147 	u8 pd[ICSSG_SPECIAL_PD_SIZE];
148 	int queue = 0, i, j;
149 	u32 *pdword;
150 
151 	/* reset hwqueues */
152 	if (slice)
153 		queue = ICSSG_NUM_TX_QUEUES;
154 
155 	for (i = 0; i < ICSSG_NUM_TX_QUEUES; i++) {
156 		regmap_write(miig_rt, ICSSG_QUEUE_RESET_OFFSET, queue);
157 		queue++;
158 	}
159 
160 	queue = slice ? RECYCLE_Q_SLICE1 : RECYCLE_Q_SLICE0;
161 	regmap_write(miig_rt, ICSSG_QUEUE_RESET_OFFSET, queue);
162 
163 	for (i = 0; i < ICSSG_NUM_OTHER_QUEUES; i++) {
164 		regmap_write(miig_rt, ICSSG_QUEUE_RESET_OFFSET,
165 			     hwq_map[slice][i].queue);
166 	}
167 
168 	/* initialize packet descriptors in SMEM */
169 	/* push pakcet descriptors to hwqueues */
170 
171 	pdword = (u32 *)pd;
172 	for (j = 0; j < ICSSG_NUM_OTHER_QUEUES; j++) {
173 		const struct map *mp;
174 		int pd_size, num_pds;
175 		u32 pdaddr;
176 
177 		mp = &hwq_map[slice][j];
178 		if (mp->special) {
179 			pd_size = ICSSG_SPECIAL_PD_SIZE;
180 			num_pds = ICSSG_NUM_SPECIAL_PDS;
181 		} else	{
182 			pd_size = ICSSG_NORMAL_PD_SIZE;
183 			num_pds = ICSSG_NUM_NORMAL_PDS;
184 		}
185 
186 		for (i = 0; i < num_pds; i++) {
187 			memset(pd, 0, pd_size);
188 
189 			pdword[0] &= ICSSG_FLAG_MASK;
190 			pdword[0] |= mp->flags;
191 			pdaddr = mp->pd_addr_start + i * pd_size;
192 
193 			memcpy_toio(smem + pdaddr, pd, pd_size);
194 			queue = mp->queue;
195 			regmap_write(miig_rt, ICSSG_QUEUE_OFFSET + 4 * queue,
196 				     pdaddr);
197 		}
198 	}
199 }
200 
201 void icssg_config_ipg(struct prueth_emac *emac)
202 {
203 	struct prueth *prueth = emac->prueth;
204 	int slice = prueth_emac_slice(emac);
205 
206 	switch (emac->speed) {
207 	case SPEED_1000:
208 		icssg_mii_update_ipg(prueth->mii_rt, slice, MII_RT_TX_IPG_1G);
209 		break;
210 	case SPEED_100:
211 		icssg_mii_update_ipg(prueth->mii_rt, slice, MII_RT_TX_IPG_100M);
212 		break;
213 	case SPEED_10:
214 		/* IPG for 10M is same as 100M */
215 		icssg_mii_update_ipg(prueth->mii_rt, slice, MII_RT_TX_IPG_100M);
216 		break;
217 	default:
218 		/* Other links speeds not supported */
219 		netdev_err(emac->ndev, "Unsupported link speed\n");
220 		return;
221 	}
222 }
223 
224 static void emac_r30_cmd_init(struct prueth_emac *emac)
225 {
226 	struct icssg_r30_cmd __iomem *p;
227 	int i;
228 
229 	p = emac->dram.va + MGR_R30_CMD_OFFSET;
230 
231 	for (i = 0; i < 4; i++)
232 		writel(EMAC_NONE, &p->cmd[i]);
233 }
234 
235 static int emac_r30_is_done(struct prueth_emac *emac)
236 {
237 	const struct icssg_r30_cmd __iomem *p;
238 	u32 cmd;
239 	int i;
240 
241 	p = emac->dram.va + MGR_R30_CMD_OFFSET;
242 
243 	for (i = 0; i < 4; i++) {
244 		cmd = readl(&p->cmd[i]);
245 		if (cmd != EMAC_NONE)
246 			return 0;
247 	}
248 
249 	return 1;
250 }
251 
252 static int prueth_emac_buffer_setup(struct prueth_emac *emac)
253 {
254 	struct icssg_buffer_pool_cfg __iomem *bpool_cfg;
255 	struct icssg_rxq_ctx __iomem *rxq_ctx;
256 	struct prueth *prueth = emac->prueth;
257 	int slice = prueth_emac_slice(emac);
258 	u32 addr;
259 	int i;
260 
261 	/* Layout to have 64KB aligned buffer pool
262 	 * |BPOOL0|BPOOL1|RX_CTX0|RX_CTX1|
263 	 */
264 
265 	addr = lower_32_bits(prueth->msmcram.pa);
266 	if (slice)
267 		addr += PRUETH_NUM_BUF_POOLS * PRUETH_EMAC_BUF_POOL_SIZE;
268 
269 	if (addr % SZ_64K) {
270 		dev_warn(prueth->dev, "buffer pool needs to be 64KB aligned\n");
271 		return -EINVAL;
272 	}
273 
274 	bpool_cfg = emac->dram.va + BUFFER_POOL_0_ADDR_OFFSET;
275 	/* workaround for f/w bug. bpool 0 needs to be initilalized */
276 	writel(addr, &bpool_cfg[0].addr);
277 	writel(0, &bpool_cfg[0].len);
278 
279 	for (i = PRUETH_EMAC_BUF_POOL_START;
280 	     i < PRUETH_EMAC_BUF_POOL_START + PRUETH_NUM_BUF_POOLS;
281 	     i++) {
282 		writel(addr, &bpool_cfg[i].addr);
283 		writel(PRUETH_EMAC_BUF_POOL_SIZE, &bpool_cfg[i].len);
284 		addr += PRUETH_EMAC_BUF_POOL_SIZE;
285 	}
286 
287 	if (!slice)
288 		addr += PRUETH_NUM_BUF_POOLS * PRUETH_EMAC_BUF_POOL_SIZE;
289 	else
290 		addr += PRUETH_EMAC_RX_CTX_BUF_SIZE * 2;
291 
292 	/* Pre-emptible RX buffer queue */
293 	rxq_ctx = emac->dram.va + HOST_RX_Q_PRE_CONTEXT_OFFSET;
294 	for (i = 0; i < 3; i++)
295 		writel(addr, &rxq_ctx->start[i]);
296 
297 	addr += PRUETH_EMAC_RX_CTX_BUF_SIZE;
298 	writel(addr, &rxq_ctx->end);
299 
300 	/* Express RX buffer queue */
301 	rxq_ctx = emac->dram.va + HOST_RX_Q_EXP_CONTEXT_OFFSET;
302 	for (i = 0; i < 3; i++)
303 		writel(addr, &rxq_ctx->start[i]);
304 
305 	addr += PRUETH_EMAC_RX_CTX_BUF_SIZE;
306 	writel(addr, &rxq_ctx->end);
307 
308 	return 0;
309 }
310 
311 static void icssg_init_emac_mode(struct prueth *prueth)
312 {
313 	/* When the device is configured as a bridge and it is being brought
314 	 * back to the emac mode, the host mac address has to be set as 0.
315 	 */
316 	u8 mac[ETH_ALEN] = { 0 };
317 
318 	if (prueth->emacs_initialized)
319 		return;
320 
321 	regmap_update_bits(prueth->miig_rt, FDB_GEN_CFG1,
322 			   SMEM_VLAN_OFFSET_MASK, 0);
323 	regmap_write(prueth->miig_rt, FDB_GEN_CFG2, 0);
324 	/* Clear host MAC address */
325 	icssg_class_set_host_mac_addr(prueth->miig_rt, mac);
326 }
327 
328 int icssg_config(struct prueth *prueth, struct prueth_emac *emac, int slice)
329 {
330 	void __iomem *config = emac->dram.va + ICSSG_CONFIG_OFFSET;
331 	struct icssg_flow_cfg __iomem *flow_cfg;
332 	int ret;
333 
334 	icssg_init_emac_mode(prueth);
335 
336 	memset_io(config, 0, TAS_GATE_MASK_LIST0);
337 	icssg_miig_queues_init(prueth, slice);
338 
339 	emac->speed = SPEED_1000;
340 	emac->duplex = DUPLEX_FULL;
341 	if (!phy_interface_mode_is_rgmii(emac->phy_if)) {
342 		emac->speed = SPEED_100;
343 		emac->duplex = DUPLEX_FULL;
344 	}
345 	regmap_update_bits(prueth->miig_rt, ICSSG_CFG_OFFSET,
346 			   ICSSG_CFG_DEFAULT, ICSSG_CFG_DEFAULT);
347 	icssg_miig_set_interface_mode(prueth->miig_rt, slice, emac->phy_if);
348 	icssg_config_mii_init(emac);
349 	icssg_config_ipg(emac);
350 	icssg_update_rgmii_cfg(prueth->miig_rt, emac);
351 
352 	/* set GPI mode */
353 	pruss_cfg_gpimode(prueth->pruss, prueth->pru_id[slice],
354 			  PRUSS_GPI_MODE_MII);
355 
356 	/* enable XFR shift for PRU and RTU */
357 	pruss_cfg_xfr_enable(prueth->pruss, PRU_TYPE_PRU, true);
358 	pruss_cfg_xfr_enable(prueth->pruss, PRU_TYPE_RTU, true);
359 
360 	/* set C28 to 0x100 */
361 	pru_rproc_set_ctable(prueth->pru[slice], PRU_C28, 0x100 << 8);
362 	pru_rproc_set_ctable(prueth->rtu[slice], PRU_C28, 0x100 << 8);
363 	pru_rproc_set_ctable(prueth->txpru[slice], PRU_C28, 0x100 << 8);
364 
365 	flow_cfg = config + PSI_L_REGULAR_FLOW_ID_BASE_OFFSET;
366 	writew(emac->rx_flow_id_base, &flow_cfg->rx_base_flow);
367 	writew(0, &flow_cfg->mgm_base_flow);
368 	writeb(0, config + SPL_PKT_DEFAULT_PRIORITY);
369 	writeb(0, config + QUEUE_NUM_UNTAGGED);
370 
371 	ret = prueth_emac_buffer_setup(emac);
372 	if (ret)
373 		return ret;
374 
375 	emac_r30_cmd_init(emac);
376 
377 	return 0;
378 }
379 
380 /* Bitmask for ICSSG r30 commands */
381 static const struct icssg_r30_cmd emac_r32_bitmask[] = {
382 	{{0xffff0004, 0xffff0100, 0xffff0004, EMAC_NONE}},	/* EMAC_PORT_DISABLE */
383 	{{0xfffb0040, 0xfeff0200, 0xfeff0200, EMAC_NONE}},	/* EMAC_PORT_BLOCK */
384 	{{0xffbb0000, 0xfcff0000, 0xdcfb0000, EMAC_NONE}},	/* EMAC_PORT_FORWARD */
385 	{{0xffbb0000, 0xfcff0000, 0xfcff2000, EMAC_NONE}},	/* EMAC_PORT_FORWARD_WO_LEARNING */
386 	{{0xffff0001, EMAC_NONE,  EMAC_NONE, EMAC_NONE}},	/* ACCEPT ALL */
387 	{{0xfffe0002, EMAC_NONE,  EMAC_NONE, EMAC_NONE}},	/* ACCEPT TAGGED */
388 	{{0xfffc0000, EMAC_NONE,  EMAC_NONE, EMAC_NONE}},	/* ACCEPT UNTAGGED and PRIO */
389 	{{EMAC_NONE,  0xffff0020, EMAC_NONE, EMAC_NONE}},	/* TAS Trigger List change */
390 	{{EMAC_NONE,  0xdfff1000, EMAC_NONE, EMAC_NONE}},	/* TAS set state ENABLE*/
391 	{{EMAC_NONE,  0xefff2000, EMAC_NONE, EMAC_NONE}},	/* TAS set state RESET*/
392 	{{EMAC_NONE,  0xcfff0000, EMAC_NONE, EMAC_NONE}},	/* TAS set state DISABLE*/
393 	{{EMAC_NONE,  EMAC_NONE,  0xffff0400, EMAC_NONE}},	/* UC flooding ENABLE*/
394 	{{EMAC_NONE,  EMAC_NONE,  0xfbff0000, EMAC_NONE}},	/* UC flooding DISABLE*/
395 	{{EMAC_NONE,  EMAC_NONE,  0xffff0800, EMAC_NONE}},	/* MC flooding ENABLE*/
396 	{{EMAC_NONE,  EMAC_NONE,  0xf7ff0000, EMAC_NONE}},	/* MC flooding DISABLE*/
397 	{{EMAC_NONE,  0xffff4000, EMAC_NONE, EMAC_NONE}},	/* Preemption on Tx ENABLE*/
398 	{{EMAC_NONE,  0xbfff0000, EMAC_NONE, EMAC_NONE}},	/* Preemption on Tx DISABLE*/
399 	{{0xffff0010,  EMAC_NONE, 0xffff0010, EMAC_NONE}},	/* VLAN AWARE*/
400 	{{0xffef0000,  EMAC_NONE, 0xffef0000, EMAC_NONE}}	/* VLAN UNWARE*/
401 };
402 
403 int emac_set_port_state(struct prueth_emac *emac,
404 			enum icssg_port_state_cmd cmd)
405 {
406 	struct icssg_r30_cmd __iomem *p;
407 	int ret = -ETIMEDOUT;
408 	int done = 0;
409 	int i;
410 
411 	p = emac->dram.va + MGR_R30_CMD_OFFSET;
412 
413 	if (cmd >= ICSSG_EMAC_PORT_MAX_COMMANDS) {
414 		netdev_err(emac->ndev, "invalid port command\n");
415 		return -EINVAL;
416 	}
417 
418 	/* only one command at a time allowed to firmware */
419 	mutex_lock(&emac->cmd_lock);
420 
421 	for (i = 0; i < 4; i++)
422 		writel(emac_r32_bitmask[cmd].cmd[i], &p->cmd[i]);
423 
424 	/* wait for done */
425 	ret = read_poll_timeout(emac_r30_is_done, done, done == 1,
426 				1000, 10000, false, emac);
427 
428 	if (ret == -ETIMEDOUT)
429 		netdev_err(emac->ndev, "timeout waiting for command done\n");
430 
431 	mutex_unlock(&emac->cmd_lock);
432 
433 	return ret;
434 }
435 
436 void icssg_config_set_speed(struct prueth_emac *emac)
437 {
438 	u8 fw_speed;
439 
440 	switch (emac->speed) {
441 	case SPEED_1000:
442 		fw_speed = FW_LINK_SPEED_1G;
443 		break;
444 	case SPEED_100:
445 		fw_speed = FW_LINK_SPEED_100M;
446 		break;
447 	case SPEED_10:
448 		fw_speed = FW_LINK_SPEED_10M;
449 		break;
450 	default:
451 		/* Other links speeds not supported */
452 		netdev_err(emac->ndev, "Unsupported link speed\n");
453 		return;
454 	}
455 
456 	writeb(fw_speed, emac->dram.va + PORT_LINK_SPEED_OFFSET);
457 }
458