1 /*
2  * DaVinci MDIO Module driver
3  *
4  * Copyright (C) 2010 Texas Instruments.
5  *
6  * Shamelessly ripped out of davinci_emac.c, original copyrights follow:
7  *
8  * Copyright (C) 2009 Texas Instruments.
9  *
10  * ---------------------------------------------------------------------------
11  *
12  * This program is free software; you can redistribute it and/or modify
13  * it under the terms of the GNU General Public License as published by
14  * the Free Software Foundation; either version 2 of the License, or
15  * (at your option) any later version.
16  *
17  * This program is distributed in the hope that it will be useful,
18  * but WITHOUT ANY WARRANTY; without even the implied warranty of
19  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
20  * GNU General Public License for more details.
21  *
22  * You should have received a copy of the GNU General Public License
23  * along with this program; if not, write to the Free Software
24  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25  * ---------------------------------------------------------------------------
26  */
27 #include <linux/module.h>
28 #include <linux/kernel.h>
29 #include <linux/platform_device.h>
30 #include <linux/delay.h>
31 #include <linux/sched.h>
32 #include <linux/slab.h>
33 #include <linux/phy.h>
34 #include <linux/clk.h>
35 #include <linux/err.h>
36 #include <linux/io.h>
37 #include <linux/iopoll.h>
38 #include <linux/pm_runtime.h>
39 #include <linux/davinci_emac.h>
40 #include <linux/of.h>
41 #include <linux/of_device.h>
42 #include <linux/of_mdio.h>
43 #include <linux/pinctrl/consumer.h>
44 
45 /*
46  * This timeout definition is a worst-case ultra defensive measure against
47  * unexpected controller lock ups.  Ideally, we should never ever hit this
48  * scenario in practice.
49  */
50 #define MDIO_TIMEOUT		100 /* msecs */
51 
52 #define PHY_REG_MASK		0x1f
53 #define PHY_ID_MASK		0x1f
54 
55 #define DEF_OUT_FREQ		2200000		/* 2.2 MHz */
56 
57 struct davinci_mdio_of_param {
58 	int autosuspend_delay_ms;
59 };
60 
61 struct davinci_mdio_regs {
62 	u32	version;
63 	u32	control;
64 #define CONTROL_IDLE		BIT(31)
65 #define CONTROL_ENABLE		BIT(30)
66 #define CONTROL_MAX_DIV		(0xffff)
67 
68 	u32	alive;
69 	u32	link;
70 	u32	linkintraw;
71 	u32	linkintmasked;
72 	u32	__reserved_0[2];
73 	u32	userintraw;
74 	u32	userintmasked;
75 	u32	userintmaskset;
76 	u32	userintmaskclr;
77 	u32	__reserved_1[20];
78 
79 	struct {
80 		u32	access;
81 #define USERACCESS_GO		BIT(31)
82 #define USERACCESS_WRITE	BIT(30)
83 #define USERACCESS_ACK		BIT(29)
84 #define USERACCESS_READ		(0)
85 #define USERACCESS_DATA		(0xffff)
86 
87 		u32	physel;
88 	}	user[0];
89 };
90 
91 static const struct mdio_platform_data default_pdata = {
92 	.bus_freq = DEF_OUT_FREQ,
93 };
94 
95 struct davinci_mdio_data {
96 	struct mdio_platform_data pdata;
97 	struct davinci_mdio_regs __iomem *regs;
98 	struct clk	*clk;
99 	struct device	*dev;
100 	struct mii_bus	*bus;
101 	bool            active_in_suspend;
102 	unsigned long	access_time; /* jiffies */
103 	/* Indicates that driver shouldn't modify phy_mask in case
104 	 * if MDIO bus is registered from DT.
105 	 */
106 	bool		skip_scan;
107 	u32		clk_div;
108 };
109 
110 static void davinci_mdio_init_clk(struct davinci_mdio_data *data)
111 {
112 	u32 mdio_in, div, mdio_out_khz, access_time;
113 
114 	mdio_in = clk_get_rate(data->clk);
115 	div = (mdio_in / data->pdata.bus_freq) - 1;
116 	if (div > CONTROL_MAX_DIV)
117 		div = CONTROL_MAX_DIV;
118 
119 	data->clk_div = div;
120 	/*
121 	 * One mdio transaction consists of:
122 	 *	32 bits of preamble
123 	 *	32 bits of transferred data
124 	 *	24 bits of bus yield (not needed unless shared?)
125 	 */
126 	mdio_out_khz = mdio_in / (1000 * (div + 1));
127 	access_time  = (88 * 1000) / mdio_out_khz;
128 
129 	/*
130 	 * In the worst case, we could be kicking off a user-access immediately
131 	 * after the mdio bus scan state-machine triggered its own read.  If
132 	 * so, our request could get deferred by one access cycle.  We
133 	 * defensively allow for 4 access cycles.
134 	 */
135 	data->access_time = usecs_to_jiffies(access_time * 4);
136 	if (!data->access_time)
137 		data->access_time = 1;
138 }
139 
140 static void davinci_mdio_enable(struct davinci_mdio_data *data)
141 {
142 	/* set enable and clock divider */
143 	__raw_writel(data->clk_div | CONTROL_ENABLE, &data->regs->control);
144 }
145 
146 static int davinci_mdio_reset(struct mii_bus *bus)
147 {
148 	struct davinci_mdio_data *data = bus->priv;
149 	u32 phy_mask, ver;
150 	int ret;
151 
152 	ret = pm_runtime_get_sync(data->dev);
153 	if (ret < 0) {
154 		pm_runtime_put_noidle(data->dev);
155 		return ret;
156 	}
157 
158 	/* wait for scan logic to settle */
159 	msleep(PHY_MAX_ADDR * data->access_time);
160 
161 	/* dump hardware version info */
162 	ver = __raw_readl(&data->regs->version);
163 	dev_info(data->dev,
164 		 "davinci mdio revision %d.%d, bus freq %ld\n",
165 		 (ver >> 8) & 0xff, ver & 0xff,
166 		 data->pdata.bus_freq);
167 
168 	if (data->skip_scan)
169 		goto done;
170 
171 	/* get phy mask from the alive register */
172 	phy_mask = __raw_readl(&data->regs->alive);
173 	if (phy_mask) {
174 		/* restrict mdio bus to live phys only */
175 		dev_info(data->dev, "detected phy mask %x\n", ~phy_mask);
176 		phy_mask = ~phy_mask;
177 	} else {
178 		/* desperately scan all phys */
179 		dev_warn(data->dev, "no live phy, scanning all\n");
180 		phy_mask = 0;
181 	}
182 	data->bus->phy_mask = phy_mask;
183 
184 done:
185 	pm_runtime_mark_last_busy(data->dev);
186 	pm_runtime_put_autosuspend(data->dev);
187 
188 	return 0;
189 }
190 
191 /* wait until hardware is ready for another user access */
192 static inline int wait_for_user_access(struct davinci_mdio_data *data)
193 {
194 	struct davinci_mdio_regs __iomem *regs = data->regs;
195 	unsigned long timeout = jiffies + msecs_to_jiffies(MDIO_TIMEOUT);
196 	u32 reg;
197 
198 	while (time_after(timeout, jiffies)) {
199 		reg = __raw_readl(&regs->user[0].access);
200 		if ((reg & USERACCESS_GO) == 0)
201 			return 0;
202 
203 		reg = __raw_readl(&regs->control);
204 		if ((reg & CONTROL_IDLE) == 0) {
205 			usleep_range(100, 200);
206 			continue;
207 		}
208 
209 		/*
210 		 * An emac soft_reset may have clobbered the mdio controller's
211 		 * state machine.  We need to reset and retry the current
212 		 * operation
213 		 */
214 		dev_warn(data->dev, "resetting idled controller\n");
215 		davinci_mdio_enable(data);
216 		return -EAGAIN;
217 	}
218 
219 	reg = __raw_readl(&regs->user[0].access);
220 	if ((reg & USERACCESS_GO) == 0)
221 		return 0;
222 
223 	dev_err(data->dev, "timed out waiting for user access\n");
224 	return -ETIMEDOUT;
225 }
226 
227 /* wait until hardware state machine is idle */
228 static inline int wait_for_idle(struct davinci_mdio_data *data)
229 {
230 	struct davinci_mdio_regs __iomem *regs = data->regs;
231 	u32 val, ret;
232 
233 	ret = readl_poll_timeout(&regs->control, val, val & CONTROL_IDLE,
234 				 0, MDIO_TIMEOUT * 1000);
235 	if (ret)
236 		dev_err(data->dev, "timed out waiting for idle\n");
237 
238 	return ret;
239 }
240 
241 static int davinci_mdio_read(struct mii_bus *bus, int phy_id, int phy_reg)
242 {
243 	struct davinci_mdio_data *data = bus->priv;
244 	u32 reg;
245 	int ret;
246 
247 	if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK)
248 		return -EINVAL;
249 
250 	ret = pm_runtime_get_sync(data->dev);
251 	if (ret < 0) {
252 		pm_runtime_put_noidle(data->dev);
253 		return ret;
254 	}
255 
256 	reg = (USERACCESS_GO | USERACCESS_READ | (phy_reg << 21) |
257 	       (phy_id << 16));
258 
259 	while (1) {
260 		ret = wait_for_user_access(data);
261 		if (ret == -EAGAIN)
262 			continue;
263 		if (ret < 0)
264 			break;
265 
266 		__raw_writel(reg, &data->regs->user[0].access);
267 
268 		ret = wait_for_user_access(data);
269 		if (ret == -EAGAIN)
270 			continue;
271 		if (ret < 0)
272 			break;
273 
274 		reg = __raw_readl(&data->regs->user[0].access);
275 		ret = (reg & USERACCESS_ACK) ? (reg & USERACCESS_DATA) : -EIO;
276 		break;
277 	}
278 
279 	pm_runtime_mark_last_busy(data->dev);
280 	pm_runtime_put_autosuspend(data->dev);
281 	return ret;
282 }
283 
284 static int davinci_mdio_write(struct mii_bus *bus, int phy_id,
285 			      int phy_reg, u16 phy_data)
286 {
287 	struct davinci_mdio_data *data = bus->priv;
288 	u32 reg;
289 	int ret;
290 
291 	if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK)
292 		return -EINVAL;
293 
294 	ret = pm_runtime_get_sync(data->dev);
295 	if (ret < 0) {
296 		pm_runtime_put_noidle(data->dev);
297 		return ret;
298 	}
299 
300 	reg = (USERACCESS_GO | USERACCESS_WRITE | (phy_reg << 21) |
301 		   (phy_id << 16) | (phy_data & USERACCESS_DATA));
302 
303 	while (1) {
304 		ret = wait_for_user_access(data);
305 		if (ret == -EAGAIN)
306 			continue;
307 		if (ret < 0)
308 			break;
309 
310 		__raw_writel(reg, &data->regs->user[0].access);
311 
312 		ret = wait_for_user_access(data);
313 		if (ret == -EAGAIN)
314 			continue;
315 		break;
316 	}
317 
318 	pm_runtime_mark_last_busy(data->dev);
319 	pm_runtime_put_autosuspend(data->dev);
320 
321 	return ret;
322 }
323 
324 static int davinci_mdio_probe_dt(struct mdio_platform_data *data,
325 			 struct platform_device *pdev)
326 {
327 	struct device_node *node = pdev->dev.of_node;
328 	u32 prop;
329 
330 	if (!node)
331 		return -EINVAL;
332 
333 	if (of_property_read_u32(node, "bus_freq", &prop)) {
334 		dev_err(&pdev->dev, "Missing bus_freq property in the DT.\n");
335 		return -EINVAL;
336 	}
337 	data->bus_freq = prop;
338 
339 	return 0;
340 }
341 
342 #if IS_ENABLED(CONFIG_OF)
343 static const struct davinci_mdio_of_param of_cpsw_mdio_data = {
344 	.autosuspend_delay_ms = 100,
345 };
346 
347 static const struct of_device_id davinci_mdio_of_mtable[] = {
348 	{ .compatible = "ti,davinci_mdio", },
349 	{ .compatible = "ti,cpsw-mdio", .data = &of_cpsw_mdio_data},
350 	{ /* sentinel */ },
351 };
352 MODULE_DEVICE_TABLE(of, davinci_mdio_of_mtable);
353 #endif
354 
355 static int davinci_mdio_probe(struct platform_device *pdev)
356 {
357 	struct mdio_platform_data *pdata = dev_get_platdata(&pdev->dev);
358 	struct device *dev = &pdev->dev;
359 	struct davinci_mdio_data *data;
360 	struct resource *res;
361 	struct phy_device *phy;
362 	int ret, addr;
363 	int autosuspend_delay_ms = -1;
364 
365 	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
366 	if (!data)
367 		return -ENOMEM;
368 
369 	data->bus = devm_mdiobus_alloc(dev);
370 	if (!data->bus) {
371 		dev_err(dev, "failed to alloc mii bus\n");
372 		return -ENOMEM;
373 	}
374 
375 	if (IS_ENABLED(CONFIG_OF) && dev->of_node) {
376 		const struct of_device_id	*of_id;
377 
378 		ret = davinci_mdio_probe_dt(&data->pdata, pdev);
379 		if (ret)
380 			return ret;
381 		snprintf(data->bus->id, MII_BUS_ID_SIZE, "%s", pdev->name);
382 
383 		of_id = of_match_device(davinci_mdio_of_mtable, &pdev->dev);
384 		if (of_id) {
385 			const struct davinci_mdio_of_param *of_mdio_data;
386 
387 			of_mdio_data = of_id->data;
388 			if (of_mdio_data)
389 				autosuspend_delay_ms =
390 					of_mdio_data->autosuspend_delay_ms;
391 		}
392 	} else {
393 		data->pdata = pdata ? (*pdata) : default_pdata;
394 		snprintf(data->bus->id, MII_BUS_ID_SIZE, "%s-%x",
395 			 pdev->name, pdev->id);
396 	}
397 
398 	data->bus->name		= dev_name(dev);
399 	data->bus->read		= davinci_mdio_read,
400 	data->bus->write	= davinci_mdio_write,
401 	data->bus->reset	= davinci_mdio_reset,
402 	data->bus->parent	= dev;
403 	data->bus->priv		= data;
404 
405 	data->clk = devm_clk_get(dev, "fck");
406 	if (IS_ERR(data->clk)) {
407 		dev_err(dev, "failed to get device clock\n");
408 		return PTR_ERR(data->clk);
409 	}
410 
411 	dev_set_drvdata(dev, data);
412 	data->dev = dev;
413 
414 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
415 	data->regs = devm_ioremap_resource(dev, res);
416 	if (IS_ERR(data->regs))
417 		return PTR_ERR(data->regs);
418 
419 	davinci_mdio_init_clk(data);
420 
421 	pm_runtime_set_autosuspend_delay(&pdev->dev, autosuspend_delay_ms);
422 	pm_runtime_use_autosuspend(&pdev->dev);
423 	pm_runtime_enable(&pdev->dev);
424 
425 	/* register the mii bus
426 	 * Create PHYs from DT only in case if PHY child nodes are explicitly
427 	 * defined to support backward compatibility with DTs which assume that
428 	 * Davinci MDIO will always scan the bus for PHYs detection.
429 	 */
430 	if (dev->of_node && of_get_child_count(dev->of_node))
431 		data->skip_scan = true;
432 
433 	ret = of_mdiobus_register(data->bus, dev->of_node);
434 	if (ret)
435 		goto bail_out;
436 
437 	/* scan and dump the bus */
438 	for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
439 		phy = mdiobus_get_phy(data->bus, addr);
440 		if (phy) {
441 			dev_info(dev, "phy[%d]: device %s, driver %s\n",
442 				 phy->mdio.addr, phydev_name(phy),
443 				 phy->drv ? phy->drv->name : "unknown");
444 		}
445 	}
446 
447 	return 0;
448 
449 bail_out:
450 	pm_runtime_dont_use_autosuspend(&pdev->dev);
451 	pm_runtime_disable(&pdev->dev);
452 	return ret;
453 }
454 
455 static int davinci_mdio_remove(struct platform_device *pdev)
456 {
457 	struct davinci_mdio_data *data = platform_get_drvdata(pdev);
458 
459 	if (data->bus)
460 		mdiobus_unregister(data->bus);
461 
462 	pm_runtime_dont_use_autosuspend(&pdev->dev);
463 	pm_runtime_disable(&pdev->dev);
464 
465 	return 0;
466 }
467 
468 #ifdef CONFIG_PM
469 static int davinci_mdio_runtime_suspend(struct device *dev)
470 {
471 	struct davinci_mdio_data *data = dev_get_drvdata(dev);
472 	u32 ctrl;
473 
474 	/* shutdown the scan state machine */
475 	ctrl = __raw_readl(&data->regs->control);
476 	ctrl &= ~CONTROL_ENABLE;
477 	__raw_writel(ctrl, &data->regs->control);
478 	wait_for_idle(data);
479 
480 	return 0;
481 }
482 
483 static int davinci_mdio_runtime_resume(struct device *dev)
484 {
485 	struct davinci_mdio_data *data = dev_get_drvdata(dev);
486 
487 	davinci_mdio_enable(data);
488 	return 0;
489 }
490 #endif
491 
492 #ifdef CONFIG_PM_SLEEP
493 static int davinci_mdio_suspend(struct device *dev)
494 {
495 	struct davinci_mdio_data *data = dev_get_drvdata(dev);
496 	int ret = 0;
497 
498 	data->active_in_suspend = !pm_runtime_status_suspended(dev);
499 	if (data->active_in_suspend)
500 		ret = pm_runtime_force_suspend(dev);
501 	if (ret < 0)
502 		return ret;
503 
504 	/* Select sleep pin state */
505 	pinctrl_pm_select_sleep_state(dev);
506 
507 	return 0;
508 }
509 
510 static int davinci_mdio_resume(struct device *dev)
511 {
512 	struct davinci_mdio_data *data = dev_get_drvdata(dev);
513 
514 	/* Select default pin state */
515 	pinctrl_pm_select_default_state(dev);
516 
517 	if (data->active_in_suspend)
518 		pm_runtime_force_resume(dev);
519 
520 	return 0;
521 }
522 #endif
523 
524 static const struct dev_pm_ops davinci_mdio_pm_ops = {
525 	SET_RUNTIME_PM_OPS(davinci_mdio_runtime_suspend,
526 			   davinci_mdio_runtime_resume, NULL)
527 	SET_LATE_SYSTEM_SLEEP_PM_OPS(davinci_mdio_suspend, davinci_mdio_resume)
528 };
529 
530 static struct platform_driver davinci_mdio_driver = {
531 	.driver = {
532 		.name	 = "davinci_mdio",
533 		.pm	 = &davinci_mdio_pm_ops,
534 		.of_match_table = of_match_ptr(davinci_mdio_of_mtable),
535 	},
536 	.probe = davinci_mdio_probe,
537 	.remove = davinci_mdio_remove,
538 };
539 
540 static int __init davinci_mdio_init(void)
541 {
542 	return platform_driver_register(&davinci_mdio_driver);
543 }
544 device_initcall(davinci_mdio_init);
545 
546 static void __exit davinci_mdio_exit(void)
547 {
548 	platform_driver_unregister(&davinci_mdio_driver);
549 }
550 module_exit(davinci_mdio_exit);
551 
552 MODULE_LICENSE("GPL");
553 MODULE_DESCRIPTION("DaVinci MDIO driver");
554