1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * DaVinci Ethernet Medium Access Controller 4 * 5 * DaVinci EMAC is based upon CPPI 3.0 TI DMA engine 6 * 7 * Copyright (C) 2009 Texas Instruments. 8 * 9 * --------------------------------------------------------------------------- 10 * History: 11 * 0-5 A number of folks worked on this driver in bits and pieces but the major 12 * contribution came from Suraj Iyer and Anant Gole 13 * 6.0 Anant Gole - rewrote the driver as per Linux conventions 14 * 6.1 Chaithrika U S - added support for Gigabit and RMII features, 15 * PHY layer usage 16 */ 17 18 #include <linux/module.h> 19 #include <linux/kernel.h> 20 #include <linux/sched.h> 21 #include <linux/string.h> 22 #include <linux/timer.h> 23 #include <linux/errno.h> 24 #include <linux/in.h> 25 #include <linux/ioport.h> 26 #include <linux/slab.h> 27 #include <linux/mm.h> 28 #include <linux/interrupt.h> 29 #include <linux/init.h> 30 #include <linux/netdevice.h> 31 #include <linux/etherdevice.h> 32 #include <linux/skbuff.h> 33 #include <linux/ethtool.h> 34 #include <linux/highmem.h> 35 #include <linux/proc_fs.h> 36 #include <linux/ctype.h> 37 #include <linux/spinlock.h> 38 #include <linux/dma-mapping.h> 39 #include <linux/clk.h> 40 #include <linux/platform_device.h> 41 #include <linux/regmap.h> 42 #include <linux/semaphore.h> 43 #include <linux/phy.h> 44 #include <linux/bitops.h> 45 #include <linux/io.h> 46 #include <linux/uaccess.h> 47 #include <linux/pm_runtime.h> 48 #include <linux/davinci_emac.h> 49 #include <linux/of.h> 50 #include <linux/of_address.h> 51 #include <linux/of_device.h> 52 #include <linux/of_mdio.h> 53 #include <linux/of_irq.h> 54 #include <linux/of_net.h> 55 #include <linux/mfd/syscon.h> 56 57 #include <asm/irq.h> 58 #include <asm/page.h> 59 60 #include "cpsw.h" 61 #include "davinci_cpdma.h" 62 63 static int debug_level; 64 module_param(debug_level, int, 0); 65 MODULE_PARM_DESC(debug_level, "DaVinci EMAC debug level (NETIF_MSG bits)"); 66 67 /* Netif debug messages possible */ 68 #define DAVINCI_EMAC_DEBUG (NETIF_MSG_DRV | \ 69 NETIF_MSG_PROBE | \ 70 NETIF_MSG_LINK | \ 71 NETIF_MSG_TIMER | \ 72 NETIF_MSG_IFDOWN | \ 73 NETIF_MSG_IFUP | \ 74 NETIF_MSG_RX_ERR | \ 75 NETIF_MSG_TX_ERR | \ 76 NETIF_MSG_TX_QUEUED | \ 77 NETIF_MSG_INTR | \ 78 NETIF_MSG_TX_DONE | \ 79 NETIF_MSG_RX_STATUS | \ 80 NETIF_MSG_PKTDATA | \ 81 NETIF_MSG_HW | \ 82 NETIF_MSG_WOL) 83 84 /* version info */ 85 #define EMAC_MAJOR_VERSION 6 86 #define EMAC_MINOR_VERSION 1 87 #define EMAC_MODULE_VERSION "6.1" 88 MODULE_VERSION(EMAC_MODULE_VERSION); 89 static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1"; 90 91 /* Configuration items */ 92 #define EMAC_DEF_PASS_CRC (0) /* Do not pass CRC up to frames */ 93 #define EMAC_DEF_QOS_EN (0) /* EMAC proprietary QoS disabled */ 94 #define EMAC_DEF_NO_BUFF_CHAIN (0) /* No buffer chain */ 95 #define EMAC_DEF_MACCTRL_FRAME_EN (0) /* Discard Maccontrol frames */ 96 #define EMAC_DEF_SHORT_FRAME_EN (0) /* Discard short frames */ 97 #define EMAC_DEF_ERROR_FRAME_EN (0) /* Discard error frames */ 98 #define EMAC_DEF_PROM_EN (0) /* Promiscuous disabled */ 99 #define EMAC_DEF_PROM_CH (0) /* Promiscuous channel is 0 */ 100 #define EMAC_DEF_BCAST_EN (1) /* Broadcast enabled */ 101 #define EMAC_DEF_BCAST_CH (0) /* Broadcast channel is 0 */ 102 #define EMAC_DEF_MCAST_EN (1) /* Multicast enabled */ 103 #define EMAC_DEF_MCAST_CH (0) /* Multicast channel is 0 */ 104 105 #define EMAC_DEF_TXPRIO_FIXED (1) /* TX Priority is fixed */ 106 #define EMAC_DEF_TXPACING_EN (0) /* TX pacing NOT supported*/ 107 108 #define EMAC_DEF_BUFFER_OFFSET (0) /* Buffer offset to DMA (future) */ 109 #define EMAC_DEF_MIN_ETHPKTSIZE (60) /* Minimum ethernet pkt size */ 110 #define EMAC_DEF_MAX_FRAME_SIZE (1500 + 14 + 4 + 4) 111 #define EMAC_DEF_TX_CH (0) /* Default 0th channel */ 112 #define EMAC_DEF_RX_CH (0) /* Default 0th channel */ 113 #define EMAC_DEF_RX_NUM_DESC (128) 114 #define EMAC_DEF_MAX_TX_CH (1) /* Max TX channels configured */ 115 #define EMAC_DEF_MAX_RX_CH (1) /* Max RX channels configured */ 116 #define EMAC_POLL_WEIGHT (64) /* Default NAPI poll weight */ 117 118 /* Buffer descriptor parameters */ 119 #define EMAC_DEF_TX_MAX_SERVICE (32) /* TX max service BD's */ 120 #define EMAC_DEF_RX_MAX_SERVICE (64) /* should = netdev->weight */ 121 122 /* EMAC register related defines */ 123 #define EMAC_ALL_MULTI_REG_VALUE (0xFFFFFFFF) 124 #define EMAC_NUM_MULTICAST_BITS (64) 125 #define EMAC_TX_CONTROL_TX_ENABLE_VAL (0x1) 126 #define EMAC_RX_CONTROL_RX_ENABLE_VAL (0x1) 127 #define EMAC_MAC_HOST_ERR_INTMASK_VAL (0x2) 128 #define EMAC_RX_UNICAST_CLEAR_ALL (0xFF) 129 #define EMAC_INT_MASK_CLEAR (0xFF) 130 131 /* RX MBP register bit positions */ 132 #define EMAC_RXMBP_PASSCRC_MASK BIT(30) 133 #define EMAC_RXMBP_QOSEN_MASK BIT(29) 134 #define EMAC_RXMBP_NOCHAIN_MASK BIT(28) 135 #define EMAC_RXMBP_CMFEN_MASK BIT(24) 136 #define EMAC_RXMBP_CSFEN_MASK BIT(23) 137 #define EMAC_RXMBP_CEFEN_MASK BIT(22) 138 #define EMAC_RXMBP_CAFEN_MASK BIT(21) 139 #define EMAC_RXMBP_PROMCH_SHIFT (16) 140 #define EMAC_RXMBP_PROMCH_MASK (0x7 << 16) 141 #define EMAC_RXMBP_BROADEN_MASK BIT(13) 142 #define EMAC_RXMBP_BROADCH_SHIFT (8) 143 #define EMAC_RXMBP_BROADCH_MASK (0x7 << 8) 144 #define EMAC_RXMBP_MULTIEN_MASK BIT(5) 145 #define EMAC_RXMBP_MULTICH_SHIFT (0) 146 #define EMAC_RXMBP_MULTICH_MASK (0x7) 147 #define EMAC_RXMBP_CHMASK (0x7) 148 149 /* EMAC register definitions/bit maps used */ 150 # define EMAC_MBP_RXPROMISC (0x00200000) 151 # define EMAC_MBP_PROMISCCH(ch) (((ch) & 0x7) << 16) 152 # define EMAC_MBP_RXBCAST (0x00002000) 153 # define EMAC_MBP_BCASTCHAN(ch) (((ch) & 0x7) << 8) 154 # define EMAC_MBP_RXMCAST (0x00000020) 155 # define EMAC_MBP_MCASTCHAN(ch) ((ch) & 0x7) 156 157 /* EMAC mac_control register */ 158 #define EMAC_MACCONTROL_TXPTYPE BIT(9) 159 #define EMAC_MACCONTROL_TXPACEEN BIT(6) 160 #define EMAC_MACCONTROL_GMIIEN BIT(5) 161 #define EMAC_MACCONTROL_GIGABITEN BIT(7) 162 #define EMAC_MACCONTROL_FULLDUPLEXEN BIT(0) 163 #define EMAC_MACCONTROL_RMIISPEED_MASK BIT(15) 164 165 /* GIGABIT MODE related bits */ 166 #define EMAC_DM646X_MACCONTORL_GIG BIT(7) 167 #define EMAC_DM646X_MACCONTORL_GIGFORCE BIT(17) 168 169 /* EMAC mac_status register */ 170 #define EMAC_MACSTATUS_TXERRCODE_MASK (0xF00000) 171 #define EMAC_MACSTATUS_TXERRCODE_SHIFT (20) 172 #define EMAC_MACSTATUS_TXERRCH_MASK (0x70000) 173 #define EMAC_MACSTATUS_TXERRCH_SHIFT (16) 174 #define EMAC_MACSTATUS_RXERRCODE_MASK (0xF000) 175 #define EMAC_MACSTATUS_RXERRCODE_SHIFT (12) 176 #define EMAC_MACSTATUS_RXERRCH_MASK (0x700) 177 #define EMAC_MACSTATUS_RXERRCH_SHIFT (8) 178 179 /* EMAC RX register masks */ 180 #define EMAC_RX_MAX_LEN_MASK (0xFFFF) 181 #define EMAC_RX_BUFFER_OFFSET_MASK (0xFFFF) 182 183 /* MAC_IN_VECTOR (0x180) register bit fields */ 184 #define EMAC_DM644X_MAC_IN_VECTOR_HOST_INT BIT(17) 185 #define EMAC_DM644X_MAC_IN_VECTOR_STATPEND_INT BIT(16) 186 #define EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC BIT(8) 187 #define EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC BIT(0) 188 189 /** NOTE:: For DM646x the IN_VECTOR has changed */ 190 #define EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC BIT(EMAC_DEF_RX_CH) 191 #define EMAC_DM646X_MAC_IN_VECTOR_TX_INT_VEC BIT(16 + EMAC_DEF_TX_CH) 192 #define EMAC_DM646X_MAC_IN_VECTOR_HOST_INT BIT(26) 193 #define EMAC_DM646X_MAC_IN_VECTOR_STATPEND_INT BIT(27) 194 195 /* CPPI bit positions */ 196 #define EMAC_CPPI_SOP_BIT BIT(31) 197 #define EMAC_CPPI_EOP_BIT BIT(30) 198 #define EMAC_CPPI_OWNERSHIP_BIT BIT(29) 199 #define EMAC_CPPI_EOQ_BIT BIT(28) 200 #define EMAC_CPPI_TEARDOWN_COMPLETE_BIT BIT(27) 201 #define EMAC_CPPI_PASS_CRC_BIT BIT(26) 202 #define EMAC_RX_BD_BUF_SIZE (0xFFFF) 203 #define EMAC_BD_LENGTH_FOR_CACHE (16) /* only CPPI bytes */ 204 #define EMAC_RX_BD_PKT_LENGTH_MASK (0xFFFF) 205 206 /* Max hardware defines */ 207 #define EMAC_MAX_TXRX_CHANNELS (8) /* Max hardware channels */ 208 #define EMAC_DEF_MAX_MULTICAST_ADDRESSES (64) /* Max mcast addr's */ 209 210 /* EMAC Peripheral Device Register Memory Layout structure */ 211 #define EMAC_MACINVECTOR 0x90 212 213 #define EMAC_DM646X_MACEOIVECTOR 0x94 214 215 #define EMAC_MACINTSTATRAW 0xB0 216 #define EMAC_MACINTSTATMASKED 0xB4 217 #define EMAC_MACINTMASKSET 0xB8 218 #define EMAC_MACINTMASKCLEAR 0xBC 219 220 #define EMAC_RXMBPENABLE 0x100 221 #define EMAC_RXUNICASTSET 0x104 222 #define EMAC_RXUNICASTCLEAR 0x108 223 #define EMAC_RXMAXLEN 0x10C 224 #define EMAC_RXBUFFEROFFSET 0x110 225 #define EMAC_RXFILTERLOWTHRESH 0x114 226 227 #define EMAC_MACCONTROL 0x160 228 #define EMAC_MACSTATUS 0x164 229 #define EMAC_EMCONTROL 0x168 230 #define EMAC_FIFOCONTROL 0x16C 231 #define EMAC_MACCONFIG 0x170 232 #define EMAC_SOFTRESET 0x174 233 #define EMAC_MACSRCADDRLO 0x1D0 234 #define EMAC_MACSRCADDRHI 0x1D4 235 #define EMAC_MACHASH1 0x1D8 236 #define EMAC_MACHASH2 0x1DC 237 #define EMAC_MACADDRLO 0x500 238 #define EMAC_MACADDRHI 0x504 239 #define EMAC_MACINDEX 0x508 240 241 /* EMAC statistics registers */ 242 #define EMAC_RXGOODFRAMES 0x200 243 #define EMAC_RXBCASTFRAMES 0x204 244 #define EMAC_RXMCASTFRAMES 0x208 245 #define EMAC_RXPAUSEFRAMES 0x20C 246 #define EMAC_RXCRCERRORS 0x210 247 #define EMAC_RXALIGNCODEERRORS 0x214 248 #define EMAC_RXOVERSIZED 0x218 249 #define EMAC_RXJABBER 0x21C 250 #define EMAC_RXUNDERSIZED 0x220 251 #define EMAC_RXFRAGMENTS 0x224 252 #define EMAC_RXFILTERED 0x228 253 #define EMAC_RXQOSFILTERED 0x22C 254 #define EMAC_RXOCTETS 0x230 255 #define EMAC_TXGOODFRAMES 0x234 256 #define EMAC_TXBCASTFRAMES 0x238 257 #define EMAC_TXMCASTFRAMES 0x23C 258 #define EMAC_TXPAUSEFRAMES 0x240 259 #define EMAC_TXDEFERRED 0x244 260 #define EMAC_TXCOLLISION 0x248 261 #define EMAC_TXSINGLECOLL 0x24C 262 #define EMAC_TXMULTICOLL 0x250 263 #define EMAC_TXEXCESSIVECOLL 0x254 264 #define EMAC_TXLATECOLL 0x258 265 #define EMAC_TXUNDERRUN 0x25C 266 #define EMAC_TXCARRIERSENSE 0x260 267 #define EMAC_TXOCTETS 0x264 268 #define EMAC_NETOCTETS 0x280 269 #define EMAC_RXSOFOVERRUNS 0x284 270 #define EMAC_RXMOFOVERRUNS 0x288 271 #define EMAC_RXDMAOVERRUNS 0x28C 272 273 /* EMAC DM644x control registers */ 274 #define EMAC_CTRL_EWCTL (0x4) 275 #define EMAC_CTRL_EWINTTCNT (0x8) 276 277 /* EMAC DM644x control module masks */ 278 #define EMAC_DM644X_EWINTCNT_MASK 0x1FFFF 279 #define EMAC_DM644X_INTMIN_INTVL 0x1 280 #define EMAC_DM644X_INTMAX_INTVL (EMAC_DM644X_EWINTCNT_MASK) 281 282 /* EMAC DM646X control module registers */ 283 #define EMAC_DM646X_CMINTCTRL 0x0C 284 #define EMAC_DM646X_CMRXINTEN 0x14 285 #define EMAC_DM646X_CMTXINTEN 0x18 286 #define EMAC_DM646X_CMRXINTMAX 0x70 287 #define EMAC_DM646X_CMTXINTMAX 0x74 288 289 /* EMAC DM646X control module masks */ 290 #define EMAC_DM646X_INTPACEEN (0x3 << 16) 291 #define EMAC_DM646X_INTPRESCALE_MASK (0x7FF << 0) 292 #define EMAC_DM646X_CMINTMAX_CNT 63 293 #define EMAC_DM646X_CMINTMIN_CNT 2 294 #define EMAC_DM646X_CMINTMAX_INTVL (1000 / EMAC_DM646X_CMINTMIN_CNT) 295 #define EMAC_DM646X_CMINTMIN_INTVL ((1000 / EMAC_DM646X_CMINTMAX_CNT) + 1) 296 297 298 /* EMAC EOI codes for C0 */ 299 #define EMAC_DM646X_MAC_EOI_C0_RXEN (0x01) 300 #define EMAC_DM646X_MAC_EOI_C0_TXEN (0x02) 301 302 /* EMAC Stats Clear Mask */ 303 #define EMAC_STATS_CLR_MASK (0xFFFFFFFF) 304 305 /* emac_priv: EMAC private data structure 306 * 307 * EMAC adapter private data structure 308 */ 309 struct emac_priv { 310 u32 msg_enable; 311 struct net_device *ndev; 312 struct platform_device *pdev; 313 struct napi_struct napi; 314 char mac_addr[6]; 315 void __iomem *remap_addr; 316 u32 emac_base_phys; 317 void __iomem *emac_base; 318 void __iomem *ctrl_base; 319 struct cpdma_ctlr *dma; 320 struct cpdma_chan *txchan; 321 struct cpdma_chan *rxchan; 322 u32 link; /* 1=link on, 0=link off */ 323 u32 speed; /* 0=Auto Neg, 1=No PHY, 10,100, 1000 - mbps */ 324 u32 duplex; /* Link duplex: 0=Half, 1=Full */ 325 u32 rx_buf_size; 326 u32 isr_count; 327 u32 coal_intvl; 328 u32 bus_freq_mhz; 329 u8 rmii_en; 330 u8 version; 331 u32 mac_hash1; 332 u32 mac_hash2; 333 u32 multicast_hash_cnt[EMAC_NUM_MULTICAST_BITS]; 334 u32 rx_addr_type; 335 const char *phy_id; 336 struct device_node *phy_node; 337 spinlock_t lock; 338 /*platform specific members*/ 339 void (*int_enable) (void); 340 void (*int_disable) (void); 341 }; 342 343 /* EMAC TX Host Error description strings */ 344 static char *emac_txhost_errcodes[16] = { 345 "No error", "SOP error", "Ownership bit not set in SOP buffer", 346 "Zero Next Buffer Descriptor Pointer Without EOP", 347 "Zero Buffer Pointer", "Zero Buffer Length", "Packet Length Error", 348 "Reserved", "Reserved", "Reserved", "Reserved", "Reserved", 349 "Reserved", "Reserved", "Reserved", "Reserved" 350 }; 351 352 /* EMAC RX Host Error description strings */ 353 static char *emac_rxhost_errcodes[16] = { 354 "No error", "Reserved", "Ownership bit not set in input buffer", 355 "Reserved", "Zero Buffer Pointer", "Reserved", "Reserved", 356 "Reserved", "Reserved", "Reserved", "Reserved", "Reserved", 357 "Reserved", "Reserved", "Reserved", "Reserved" 358 }; 359 360 /* Helper macros */ 361 #define emac_read(reg) ioread32(priv->emac_base + (reg)) 362 #define emac_write(reg, val) iowrite32(val, priv->emac_base + (reg)) 363 364 #define emac_ctrl_read(reg) ioread32((priv->ctrl_base + (reg))) 365 #define emac_ctrl_write(reg, val) iowrite32(val, (priv->ctrl_base + (reg))) 366 367 /** 368 * emac_get_drvinfo - Get EMAC driver information 369 * @ndev: The DaVinci EMAC network adapter 370 * @info: ethtool info structure containing name and version 371 * 372 * Returns EMAC driver information (name and version) 373 * 374 */ 375 static void emac_get_drvinfo(struct net_device *ndev, 376 struct ethtool_drvinfo *info) 377 { 378 strlcpy(info->driver, emac_version_string, sizeof(info->driver)); 379 strlcpy(info->version, EMAC_MODULE_VERSION, sizeof(info->version)); 380 } 381 382 /** 383 * emac_get_coalesce - Get interrupt coalesce settings for this device 384 * @ndev : The DaVinci EMAC network adapter 385 * @coal : ethtool coalesce settings structure 386 * 387 * Fetch the current interrupt coalesce settings 388 * 389 */ 390 static int emac_get_coalesce(struct net_device *ndev, 391 struct ethtool_coalesce *coal) 392 { 393 struct emac_priv *priv = netdev_priv(ndev); 394 395 coal->rx_coalesce_usecs = priv->coal_intvl; 396 return 0; 397 398 } 399 400 /** 401 * emac_set_coalesce - Set interrupt coalesce settings for this device 402 * @ndev : The DaVinci EMAC network adapter 403 * @coal : ethtool coalesce settings structure 404 * 405 * Set interrupt coalesce parameters 406 * 407 */ 408 static int emac_set_coalesce(struct net_device *ndev, 409 struct ethtool_coalesce *coal) 410 { 411 struct emac_priv *priv = netdev_priv(ndev); 412 u32 int_ctrl, num_interrupts = 0; 413 u32 prescale = 0, addnl_dvdr = 1, coal_intvl = 0; 414 415 if (!coal->rx_coalesce_usecs) 416 return -EINVAL; 417 418 coal_intvl = coal->rx_coalesce_usecs; 419 420 switch (priv->version) { 421 case EMAC_VERSION_2: 422 int_ctrl = emac_ctrl_read(EMAC_DM646X_CMINTCTRL); 423 prescale = priv->bus_freq_mhz * 4; 424 425 if (coal_intvl < EMAC_DM646X_CMINTMIN_INTVL) 426 coal_intvl = EMAC_DM646X_CMINTMIN_INTVL; 427 428 if (coal_intvl > EMAC_DM646X_CMINTMAX_INTVL) { 429 /* 430 * Interrupt pacer works with 4us Pulse, we can 431 * throttle further by dilating the 4us pulse. 432 */ 433 addnl_dvdr = EMAC_DM646X_INTPRESCALE_MASK / prescale; 434 435 if (addnl_dvdr > 1) { 436 prescale *= addnl_dvdr; 437 if (coal_intvl > (EMAC_DM646X_CMINTMAX_INTVL 438 * addnl_dvdr)) 439 coal_intvl = (EMAC_DM646X_CMINTMAX_INTVL 440 * addnl_dvdr); 441 } else { 442 addnl_dvdr = 1; 443 coal_intvl = EMAC_DM646X_CMINTMAX_INTVL; 444 } 445 } 446 447 num_interrupts = (1000 * addnl_dvdr) / coal_intvl; 448 449 int_ctrl |= EMAC_DM646X_INTPACEEN; 450 int_ctrl &= (~EMAC_DM646X_INTPRESCALE_MASK); 451 int_ctrl |= (prescale & EMAC_DM646X_INTPRESCALE_MASK); 452 emac_ctrl_write(EMAC_DM646X_CMINTCTRL, int_ctrl); 453 454 emac_ctrl_write(EMAC_DM646X_CMRXINTMAX, num_interrupts); 455 emac_ctrl_write(EMAC_DM646X_CMTXINTMAX, num_interrupts); 456 457 break; 458 default: 459 int_ctrl = emac_ctrl_read(EMAC_CTRL_EWINTTCNT); 460 int_ctrl &= (~EMAC_DM644X_EWINTCNT_MASK); 461 prescale = coal_intvl * priv->bus_freq_mhz; 462 if (prescale > EMAC_DM644X_EWINTCNT_MASK) { 463 prescale = EMAC_DM644X_EWINTCNT_MASK; 464 coal_intvl = prescale / priv->bus_freq_mhz; 465 } 466 emac_ctrl_write(EMAC_CTRL_EWINTTCNT, (int_ctrl | prescale)); 467 468 break; 469 } 470 471 printk(KERN_INFO"Set coalesce to %d usecs.\n", coal_intvl); 472 priv->coal_intvl = coal_intvl; 473 474 return 0; 475 476 } 477 478 479 /* ethtool_ops: DaVinci EMAC Ethtool structure 480 * 481 * Ethtool support for EMAC adapter 482 */ 483 static const struct ethtool_ops ethtool_ops = { 484 .supported_coalesce_params = ETHTOOL_COALESCE_RX_USECS, 485 .get_drvinfo = emac_get_drvinfo, 486 .get_link = ethtool_op_get_link, 487 .get_coalesce = emac_get_coalesce, 488 .set_coalesce = emac_set_coalesce, 489 .get_ts_info = ethtool_op_get_ts_info, 490 .get_link_ksettings = phy_ethtool_get_link_ksettings, 491 .set_link_ksettings = phy_ethtool_set_link_ksettings, 492 }; 493 494 /** 495 * emac_update_phystatus - Update Phy status 496 * @priv: The DaVinci EMAC private adapter structure 497 * 498 * Updates phy status and takes action for network queue if required 499 * based upon link status 500 * 501 */ 502 static void emac_update_phystatus(struct emac_priv *priv) 503 { 504 u32 mac_control; 505 u32 new_duplex; 506 u32 cur_duplex; 507 struct net_device *ndev = priv->ndev; 508 509 mac_control = emac_read(EMAC_MACCONTROL); 510 cur_duplex = (mac_control & EMAC_MACCONTROL_FULLDUPLEXEN) ? 511 DUPLEX_FULL : DUPLEX_HALF; 512 if (ndev->phydev) 513 new_duplex = ndev->phydev->duplex; 514 else 515 new_duplex = DUPLEX_FULL; 516 517 /* We get called only if link has changed (speed/duplex/status) */ 518 if ((priv->link) && (new_duplex != cur_duplex)) { 519 priv->duplex = new_duplex; 520 if (DUPLEX_FULL == priv->duplex) 521 mac_control |= (EMAC_MACCONTROL_FULLDUPLEXEN); 522 else 523 mac_control &= ~(EMAC_MACCONTROL_FULLDUPLEXEN); 524 } 525 526 if (priv->speed == SPEED_1000 && (priv->version == EMAC_VERSION_2)) { 527 mac_control = emac_read(EMAC_MACCONTROL); 528 mac_control |= (EMAC_DM646X_MACCONTORL_GIG | 529 EMAC_DM646X_MACCONTORL_GIGFORCE); 530 } else { 531 /* Clear the GIG bit and GIGFORCE bit */ 532 mac_control &= ~(EMAC_DM646X_MACCONTORL_GIGFORCE | 533 EMAC_DM646X_MACCONTORL_GIG); 534 535 if (priv->rmii_en && (priv->speed == SPEED_100)) 536 mac_control |= EMAC_MACCONTROL_RMIISPEED_MASK; 537 else 538 mac_control &= ~EMAC_MACCONTROL_RMIISPEED_MASK; 539 } 540 541 /* Update mac_control if changed */ 542 emac_write(EMAC_MACCONTROL, mac_control); 543 544 if (priv->link) { 545 /* link ON */ 546 if (!netif_carrier_ok(ndev)) 547 netif_carrier_on(ndev); 548 /* reactivate the transmit queue if it is stopped */ 549 if (netif_running(ndev) && netif_queue_stopped(ndev)) 550 netif_wake_queue(ndev); 551 } else { 552 /* link OFF */ 553 if (netif_carrier_ok(ndev)) 554 netif_carrier_off(ndev); 555 if (!netif_queue_stopped(ndev)) 556 netif_stop_queue(ndev); 557 } 558 } 559 560 /** 561 * hash_get - Calculate hash value from mac address 562 * @addr: mac address to delete from hash table 563 * 564 * Calculates hash value from mac address 565 * 566 */ 567 static u32 hash_get(u8 *addr) 568 { 569 u32 hash; 570 u8 tmpval; 571 int cnt; 572 hash = 0; 573 574 for (cnt = 0; cnt < 2; cnt++) { 575 tmpval = *addr++; 576 hash ^= (tmpval >> 2) ^ (tmpval << 4); 577 tmpval = *addr++; 578 hash ^= (tmpval >> 4) ^ (tmpval << 2); 579 tmpval = *addr++; 580 hash ^= (tmpval >> 6) ^ (tmpval); 581 } 582 583 return hash & 0x3F; 584 } 585 586 /** 587 * emac_hash_add - Hash function to add mac addr from hash table 588 * @priv: The DaVinci EMAC private adapter structure 589 * @mac_addr: mac address to delete from hash table 590 * 591 * Adds mac address to the internal hash table 592 * 593 */ 594 static int emac_hash_add(struct emac_priv *priv, u8 *mac_addr) 595 { 596 struct device *emac_dev = &priv->ndev->dev; 597 u32 rc = 0; 598 u32 hash_bit; 599 u32 hash_value = hash_get(mac_addr); 600 601 if (hash_value >= EMAC_NUM_MULTICAST_BITS) { 602 if (netif_msg_drv(priv)) { 603 dev_err(emac_dev, "DaVinci EMAC: emac_hash_add(): Invalid "\ 604 "Hash %08x, should not be greater than %08x", 605 hash_value, (EMAC_NUM_MULTICAST_BITS - 1)); 606 } 607 return -1; 608 } 609 610 /* set the hash bit only if not previously set */ 611 if (priv->multicast_hash_cnt[hash_value] == 0) { 612 rc = 1; /* hash value changed */ 613 if (hash_value < 32) { 614 hash_bit = BIT(hash_value); 615 priv->mac_hash1 |= hash_bit; 616 } else { 617 hash_bit = BIT((hash_value - 32)); 618 priv->mac_hash2 |= hash_bit; 619 } 620 } 621 622 /* incr counter for num of mcast addr's mapped to "this" hash bit */ 623 ++priv->multicast_hash_cnt[hash_value]; 624 625 return rc; 626 } 627 628 /** 629 * emac_hash_del - Hash function to delete mac addr from hash table 630 * @priv: The DaVinci EMAC private adapter structure 631 * @mac_addr: mac address to delete from hash table 632 * 633 * Removes mac address from the internal hash table 634 * 635 */ 636 static int emac_hash_del(struct emac_priv *priv, u8 *mac_addr) 637 { 638 u32 hash_value; 639 u32 hash_bit; 640 641 hash_value = hash_get(mac_addr); 642 if (priv->multicast_hash_cnt[hash_value] > 0) { 643 /* dec cntr for num of mcast addr's mapped to this hash bit */ 644 --priv->multicast_hash_cnt[hash_value]; 645 } 646 647 /* if counter still > 0, at least one multicast address refers 648 * to this hash bit. so return 0 */ 649 if (priv->multicast_hash_cnt[hash_value] > 0) 650 return 0; 651 652 if (hash_value < 32) { 653 hash_bit = BIT(hash_value); 654 priv->mac_hash1 &= ~hash_bit; 655 } else { 656 hash_bit = BIT((hash_value - 32)); 657 priv->mac_hash2 &= ~hash_bit; 658 } 659 660 /* return 1 to indicate change in mac_hash registers reqd */ 661 return 1; 662 } 663 664 /* EMAC multicast operation */ 665 #define EMAC_MULTICAST_ADD 0 666 #define EMAC_MULTICAST_DEL 1 667 #define EMAC_ALL_MULTI_SET 2 668 #define EMAC_ALL_MULTI_CLR 3 669 670 /** 671 * emac_add_mcast - Set multicast address in the EMAC adapter (Internal) 672 * @priv: The DaVinci EMAC private adapter structure 673 * @action: multicast operation to perform 674 * @mac_addr: mac address to set 675 * 676 * Set multicast addresses in EMAC adapter - internal function 677 * 678 */ 679 static void emac_add_mcast(struct emac_priv *priv, u32 action, u8 *mac_addr) 680 { 681 struct device *emac_dev = &priv->ndev->dev; 682 int update = -1; 683 684 switch (action) { 685 case EMAC_MULTICAST_ADD: 686 update = emac_hash_add(priv, mac_addr); 687 break; 688 case EMAC_MULTICAST_DEL: 689 update = emac_hash_del(priv, mac_addr); 690 break; 691 case EMAC_ALL_MULTI_SET: 692 update = 1; 693 priv->mac_hash1 = EMAC_ALL_MULTI_REG_VALUE; 694 priv->mac_hash2 = EMAC_ALL_MULTI_REG_VALUE; 695 break; 696 case EMAC_ALL_MULTI_CLR: 697 update = 1; 698 priv->mac_hash1 = 0; 699 priv->mac_hash2 = 0; 700 memset(&(priv->multicast_hash_cnt[0]), 0, 701 sizeof(priv->multicast_hash_cnt[0]) * 702 EMAC_NUM_MULTICAST_BITS); 703 break; 704 default: 705 if (netif_msg_drv(priv)) 706 dev_err(emac_dev, "DaVinci EMAC: add_mcast"\ 707 ": bad operation %d", action); 708 break; 709 } 710 711 /* write to the hardware only if the register status chances */ 712 if (update > 0) { 713 emac_write(EMAC_MACHASH1, priv->mac_hash1); 714 emac_write(EMAC_MACHASH2, priv->mac_hash2); 715 } 716 } 717 718 /** 719 * emac_dev_mcast_set - Set multicast address in the EMAC adapter 720 * @ndev: The DaVinci EMAC network adapter 721 * 722 * Set multicast addresses in EMAC adapter 723 * 724 */ 725 static void emac_dev_mcast_set(struct net_device *ndev) 726 { 727 u32 mbp_enable; 728 struct emac_priv *priv = netdev_priv(ndev); 729 730 mbp_enable = emac_read(EMAC_RXMBPENABLE); 731 if (ndev->flags & IFF_PROMISC) { 732 mbp_enable &= (~EMAC_MBP_PROMISCCH(EMAC_DEF_PROM_CH)); 733 mbp_enable |= (EMAC_MBP_RXPROMISC); 734 } else { 735 mbp_enable = (mbp_enable & ~EMAC_MBP_RXPROMISC); 736 if ((ndev->flags & IFF_ALLMULTI) || 737 netdev_mc_count(ndev) > EMAC_DEF_MAX_MULTICAST_ADDRESSES) { 738 mbp_enable = (mbp_enable | EMAC_MBP_RXMCAST); 739 emac_add_mcast(priv, EMAC_ALL_MULTI_SET, NULL); 740 } else if (!netdev_mc_empty(ndev)) { 741 struct netdev_hw_addr *ha; 742 743 mbp_enable = (mbp_enable | EMAC_MBP_RXMCAST); 744 emac_add_mcast(priv, EMAC_ALL_MULTI_CLR, NULL); 745 /* program multicast address list into EMAC hardware */ 746 netdev_for_each_mc_addr(ha, ndev) { 747 emac_add_mcast(priv, EMAC_MULTICAST_ADD, 748 (u8 *) ha->addr); 749 } 750 } else { 751 mbp_enable = (mbp_enable & ~EMAC_MBP_RXMCAST); 752 emac_add_mcast(priv, EMAC_ALL_MULTI_CLR, NULL); 753 } 754 } 755 /* Set mbp config register */ 756 emac_write(EMAC_RXMBPENABLE, mbp_enable); 757 } 758 759 /************************************************************************* 760 * EMAC Hardware manipulation 761 *************************************************************************/ 762 763 /** 764 * emac_int_disable - Disable EMAC module interrupt (from adapter) 765 * @priv: The DaVinci EMAC private adapter structure 766 * 767 * Disable EMAC interrupt on the adapter 768 * 769 */ 770 static void emac_int_disable(struct emac_priv *priv) 771 { 772 if (priv->version == EMAC_VERSION_2) { 773 unsigned long flags; 774 775 local_irq_save(flags); 776 777 /* Program C0_Int_En to zero to turn off 778 * interrupts to the CPU */ 779 emac_ctrl_write(EMAC_DM646X_CMRXINTEN, 0x0); 780 emac_ctrl_write(EMAC_DM646X_CMTXINTEN, 0x0); 781 /* NOTE: Rx Threshold and Misc interrupts are not disabled */ 782 if (priv->int_disable) 783 priv->int_disable(); 784 785 /* NOTE: Rx Threshold and Misc interrupts are not enabled */ 786 787 /* ack rxen only then a new pulse will be generated */ 788 emac_write(EMAC_DM646X_MACEOIVECTOR, 789 EMAC_DM646X_MAC_EOI_C0_RXEN); 790 791 /* ack txen- only then a new pulse will be generated */ 792 emac_write(EMAC_DM646X_MACEOIVECTOR, 793 EMAC_DM646X_MAC_EOI_C0_TXEN); 794 795 local_irq_restore(flags); 796 797 } else { 798 /* Set DM644x control registers for interrupt control */ 799 emac_ctrl_write(EMAC_CTRL_EWCTL, 0x0); 800 } 801 } 802 803 /** 804 * emac_int_enable - Enable EMAC module interrupt (from adapter) 805 * @priv: The DaVinci EMAC private adapter structure 806 * 807 * Enable EMAC interrupt on the adapter 808 * 809 */ 810 static void emac_int_enable(struct emac_priv *priv) 811 { 812 if (priv->version == EMAC_VERSION_2) { 813 if (priv->int_enable) 814 priv->int_enable(); 815 816 emac_ctrl_write(EMAC_DM646X_CMRXINTEN, 0xff); 817 emac_ctrl_write(EMAC_DM646X_CMTXINTEN, 0xff); 818 819 /* In addition to turning on interrupt Enable, we need 820 * ack by writing appropriate values to the EOI 821 * register */ 822 823 /* NOTE: Rx Threshold and Misc interrupts are not enabled */ 824 } else { 825 /* Set DM644x control registers for interrupt control */ 826 emac_ctrl_write(EMAC_CTRL_EWCTL, 0x1); 827 } 828 } 829 830 /** 831 * emac_irq - EMAC interrupt handler 832 * @irq: interrupt number 833 * @dev_id: EMAC network adapter data structure ptr 834 * 835 * EMAC Interrupt handler - we only schedule NAPI and not process any packets 836 * here. EVen the interrupt status is checked (TX/RX/Err) in NAPI poll function 837 * 838 * Returns interrupt handled condition 839 */ 840 static irqreturn_t emac_irq(int irq, void *dev_id) 841 { 842 struct net_device *ndev = (struct net_device *)dev_id; 843 struct emac_priv *priv = netdev_priv(ndev); 844 845 ++priv->isr_count; 846 if (likely(netif_running(priv->ndev))) { 847 emac_int_disable(priv); 848 napi_schedule(&priv->napi); 849 } else { 850 /* we are closing down, so dont process anything */ 851 } 852 return IRQ_HANDLED; 853 } 854 855 static struct sk_buff *emac_rx_alloc(struct emac_priv *priv) 856 { 857 struct sk_buff *skb = netdev_alloc_skb(priv->ndev, priv->rx_buf_size); 858 if (WARN_ON(!skb)) 859 return NULL; 860 skb_reserve(skb, NET_IP_ALIGN); 861 return skb; 862 } 863 864 static void emac_rx_handler(void *token, int len, int status) 865 { 866 struct sk_buff *skb = token; 867 struct net_device *ndev = skb->dev; 868 struct emac_priv *priv = netdev_priv(ndev); 869 struct device *emac_dev = &ndev->dev; 870 int ret; 871 872 /* free and bail if we are shutting down */ 873 if (unlikely(!netif_running(ndev))) { 874 dev_kfree_skb_any(skb); 875 return; 876 } 877 878 /* recycle on receive error */ 879 if (status < 0) { 880 ndev->stats.rx_errors++; 881 goto recycle; 882 } 883 884 /* feed received packet up the stack */ 885 skb_put(skb, len); 886 skb->protocol = eth_type_trans(skb, ndev); 887 netif_receive_skb(skb); 888 ndev->stats.rx_bytes += len; 889 ndev->stats.rx_packets++; 890 891 /* alloc a new packet for receive */ 892 skb = emac_rx_alloc(priv); 893 if (!skb) { 894 if (netif_msg_rx_err(priv) && net_ratelimit()) 895 dev_err(emac_dev, "failed rx buffer alloc\n"); 896 return; 897 } 898 899 recycle: 900 ret = cpdma_chan_submit(priv->rxchan, skb, skb->data, 901 skb_tailroom(skb), 0); 902 903 WARN_ON(ret == -ENOMEM); 904 if (unlikely(ret < 0)) 905 dev_kfree_skb_any(skb); 906 } 907 908 static void emac_tx_handler(void *token, int len, int status) 909 { 910 struct sk_buff *skb = token; 911 struct net_device *ndev = skb->dev; 912 913 /* Check whether the queue is stopped due to stalled tx dma, if the 914 * queue is stopped then start the queue as we have free desc for tx 915 */ 916 if (unlikely(netif_queue_stopped(ndev))) 917 netif_wake_queue(ndev); 918 ndev->stats.tx_packets++; 919 ndev->stats.tx_bytes += len; 920 dev_kfree_skb_any(skb); 921 } 922 923 /** 924 * emac_dev_xmit - EMAC Transmit function 925 * @skb: SKB pointer 926 * @ndev: The DaVinci EMAC network adapter 927 * 928 * Called by the system to transmit a packet - we queue the packet in 929 * EMAC hardware transmit queue 930 * 931 * Returns success(NETDEV_TX_OK) or error code (typically out of desc's) 932 */ 933 static int emac_dev_xmit(struct sk_buff *skb, struct net_device *ndev) 934 { 935 struct device *emac_dev = &ndev->dev; 936 int ret_code; 937 struct emac_priv *priv = netdev_priv(ndev); 938 939 /* If no link, return */ 940 if (unlikely(!priv->link)) { 941 if (netif_msg_tx_err(priv) && net_ratelimit()) 942 dev_err(emac_dev, "DaVinci EMAC: No link to transmit"); 943 goto fail_tx; 944 } 945 946 ret_code = skb_padto(skb, EMAC_DEF_MIN_ETHPKTSIZE); 947 if (unlikely(ret_code < 0)) { 948 if (netif_msg_tx_err(priv) && net_ratelimit()) 949 dev_err(emac_dev, "DaVinci EMAC: packet pad failed"); 950 goto fail_tx; 951 } 952 953 skb_tx_timestamp(skb); 954 955 ret_code = cpdma_chan_submit(priv->txchan, skb, skb->data, skb->len, 956 0); 957 if (unlikely(ret_code != 0)) { 958 if (netif_msg_tx_err(priv) && net_ratelimit()) 959 dev_err(emac_dev, "DaVinci EMAC: desc submit failed"); 960 goto fail_tx; 961 } 962 963 /* If there is no more tx desc left free then we need to 964 * tell the kernel to stop sending us tx frames. 965 */ 966 if (unlikely(!cpdma_check_free_tx_desc(priv->txchan))) 967 netif_stop_queue(ndev); 968 969 return NETDEV_TX_OK; 970 971 fail_tx: 972 ndev->stats.tx_dropped++; 973 netif_stop_queue(ndev); 974 return NETDEV_TX_BUSY; 975 } 976 977 /** 978 * emac_dev_tx_timeout - EMAC Transmit timeout function 979 * @ndev: The DaVinci EMAC network adapter 980 * @txqueue: the index of the hung transmit queue 981 * 982 * Called when system detects that a skb timeout period has expired 983 * potentially due to a fault in the adapter in not being able to send 984 * it out on the wire. We teardown the TX channel assuming a hardware 985 * error and re-initialize the TX channel for hardware operation 986 * 987 */ 988 static void emac_dev_tx_timeout(struct net_device *ndev, unsigned int txqueue) 989 { 990 struct emac_priv *priv = netdev_priv(ndev); 991 struct device *emac_dev = &ndev->dev; 992 993 if (netif_msg_tx_err(priv)) 994 dev_err(emac_dev, "DaVinci EMAC: xmit timeout, restarting TX"); 995 996 ndev->stats.tx_errors++; 997 emac_int_disable(priv); 998 cpdma_chan_stop(priv->txchan); 999 cpdma_chan_start(priv->txchan); 1000 emac_int_enable(priv); 1001 } 1002 1003 /** 1004 * emac_set_type0addr - Set EMAC Type0 mac address 1005 * @priv: The DaVinci EMAC private adapter structure 1006 * @ch: RX channel number 1007 * @mac_addr: MAC address to set in device 1008 * 1009 * Called internally to set Type0 mac address of the adapter (Device) 1010 * 1011 * Returns success (0) or appropriate error code (none as of now) 1012 */ 1013 static void emac_set_type0addr(struct emac_priv *priv, u32 ch, char *mac_addr) 1014 { 1015 u32 val; 1016 val = ((mac_addr[5] << 8) | (mac_addr[4])); 1017 emac_write(EMAC_MACSRCADDRLO, val); 1018 1019 val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \ 1020 (mac_addr[1] << 8) | (mac_addr[0])); 1021 emac_write(EMAC_MACSRCADDRHI, val); 1022 val = emac_read(EMAC_RXUNICASTSET); 1023 val |= BIT(ch); 1024 emac_write(EMAC_RXUNICASTSET, val); 1025 val = emac_read(EMAC_RXUNICASTCLEAR); 1026 val &= ~BIT(ch); 1027 emac_write(EMAC_RXUNICASTCLEAR, val); 1028 } 1029 1030 /** 1031 * emac_set_type1addr - Set EMAC Type1 mac address 1032 * @priv: The DaVinci EMAC private adapter structure 1033 * @ch: RX channel number 1034 * @mac_addr: MAC address to set in device 1035 * 1036 * Called internally to set Type1 mac address of the adapter (Device) 1037 * 1038 * Returns success (0) or appropriate error code (none as of now) 1039 */ 1040 static void emac_set_type1addr(struct emac_priv *priv, u32 ch, char *mac_addr) 1041 { 1042 u32 val; 1043 emac_write(EMAC_MACINDEX, ch); 1044 val = ((mac_addr[5] << 8) | mac_addr[4]); 1045 emac_write(EMAC_MACADDRLO, val); 1046 val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \ 1047 (mac_addr[1] << 8) | (mac_addr[0])); 1048 emac_write(EMAC_MACADDRHI, val); 1049 emac_set_type0addr(priv, ch, mac_addr); 1050 } 1051 1052 /** 1053 * emac_set_type2addr - Set EMAC Type2 mac address 1054 * @priv: The DaVinci EMAC private adapter structure 1055 * @ch: RX channel number 1056 * @mac_addr: MAC address to set in device 1057 * @index: index into RX address entries 1058 * @match: match parameter for RX address matching logic 1059 * 1060 * Called internally to set Type2 mac address of the adapter (Device) 1061 * 1062 * Returns success (0) or appropriate error code (none as of now) 1063 */ 1064 static void emac_set_type2addr(struct emac_priv *priv, u32 ch, 1065 char *mac_addr, int index, int match) 1066 { 1067 u32 val; 1068 emac_write(EMAC_MACINDEX, index); 1069 val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \ 1070 (mac_addr[1] << 8) | (mac_addr[0])); 1071 emac_write(EMAC_MACADDRHI, val); 1072 val = ((mac_addr[5] << 8) | mac_addr[4] | ((ch & 0x7) << 16) | \ 1073 (match << 19) | BIT(20)); 1074 emac_write(EMAC_MACADDRLO, val); 1075 emac_set_type0addr(priv, ch, mac_addr); 1076 } 1077 1078 /** 1079 * emac_setmac - Set mac address in the adapter (internal function) 1080 * @priv: The DaVinci EMAC private adapter structure 1081 * @ch: RX channel number 1082 * @mac_addr: MAC address to set in device 1083 * 1084 * Called internally to set the mac address of the adapter (Device) 1085 * 1086 * Returns success (0) or appropriate error code (none as of now) 1087 */ 1088 static void emac_setmac(struct emac_priv *priv, u32 ch, char *mac_addr) 1089 { 1090 struct device *emac_dev = &priv->ndev->dev; 1091 1092 if (priv->rx_addr_type == 0) { 1093 emac_set_type0addr(priv, ch, mac_addr); 1094 } else if (priv->rx_addr_type == 1) { 1095 u32 cnt; 1096 for (cnt = 0; cnt < EMAC_MAX_TXRX_CHANNELS; cnt++) 1097 emac_set_type1addr(priv, ch, mac_addr); 1098 } else if (priv->rx_addr_type == 2) { 1099 emac_set_type2addr(priv, ch, mac_addr, ch, 1); 1100 emac_set_type0addr(priv, ch, mac_addr); 1101 } else { 1102 if (netif_msg_drv(priv)) 1103 dev_err(emac_dev, "DaVinci EMAC: Wrong addressing\n"); 1104 } 1105 } 1106 1107 /** 1108 * emac_dev_setmac_addr - Set mac address in the adapter 1109 * @ndev: The DaVinci EMAC network adapter 1110 * @addr: MAC address to set in device 1111 * 1112 * Called by the system to set the mac address of the adapter (Device) 1113 * 1114 * Returns success (0) or appropriate error code (none as of now) 1115 */ 1116 static int emac_dev_setmac_addr(struct net_device *ndev, void *addr) 1117 { 1118 struct emac_priv *priv = netdev_priv(ndev); 1119 struct device *emac_dev = &priv->ndev->dev; 1120 struct sockaddr *sa = addr; 1121 1122 if (!is_valid_ether_addr(sa->sa_data)) 1123 return -EADDRNOTAVAIL; 1124 1125 /* Store mac addr in priv and rx channel and set it in EMAC hw */ 1126 memcpy(priv->mac_addr, sa->sa_data, ndev->addr_len); 1127 memcpy(ndev->dev_addr, sa->sa_data, ndev->addr_len); 1128 1129 /* MAC address is configured only after the interface is enabled. */ 1130 if (netif_running(ndev)) { 1131 emac_setmac(priv, EMAC_DEF_RX_CH, priv->mac_addr); 1132 } 1133 1134 if (netif_msg_drv(priv)) 1135 dev_notice(emac_dev, "DaVinci EMAC: emac_dev_setmac_addr %pM\n", 1136 priv->mac_addr); 1137 1138 return 0; 1139 } 1140 1141 /** 1142 * emac_hw_enable - Enable EMAC hardware for packet transmission/reception 1143 * @priv: The DaVinci EMAC private adapter structure 1144 * 1145 * Enables EMAC hardware for packet processing - enables PHY, enables RX 1146 * for packet reception and enables device interrupts and then NAPI 1147 * 1148 * Returns success (0) or appropriate error code (none right now) 1149 */ 1150 static int emac_hw_enable(struct emac_priv *priv) 1151 { 1152 u32 val, mbp_enable, mac_control; 1153 1154 /* Soft reset */ 1155 emac_write(EMAC_SOFTRESET, 1); 1156 while (emac_read(EMAC_SOFTRESET)) 1157 cpu_relax(); 1158 1159 /* Disable interrupt & Set pacing for more interrupts initially */ 1160 emac_int_disable(priv); 1161 1162 /* Full duplex enable bit set when auto negotiation happens */ 1163 mac_control = 1164 (((EMAC_DEF_TXPRIO_FIXED) ? (EMAC_MACCONTROL_TXPTYPE) : 0x0) | 1165 ((priv->speed == 1000) ? EMAC_MACCONTROL_GIGABITEN : 0x0) | 1166 ((EMAC_DEF_TXPACING_EN) ? (EMAC_MACCONTROL_TXPACEEN) : 0x0) | 1167 ((priv->duplex == DUPLEX_FULL) ? 0x1 : 0)); 1168 emac_write(EMAC_MACCONTROL, mac_control); 1169 1170 mbp_enable = 1171 (((EMAC_DEF_PASS_CRC) ? (EMAC_RXMBP_PASSCRC_MASK) : 0x0) | 1172 ((EMAC_DEF_QOS_EN) ? (EMAC_RXMBP_QOSEN_MASK) : 0x0) | 1173 ((EMAC_DEF_NO_BUFF_CHAIN) ? (EMAC_RXMBP_NOCHAIN_MASK) : 0x0) | 1174 ((EMAC_DEF_MACCTRL_FRAME_EN) ? (EMAC_RXMBP_CMFEN_MASK) : 0x0) | 1175 ((EMAC_DEF_SHORT_FRAME_EN) ? (EMAC_RXMBP_CSFEN_MASK) : 0x0) | 1176 ((EMAC_DEF_ERROR_FRAME_EN) ? (EMAC_RXMBP_CEFEN_MASK) : 0x0) | 1177 ((EMAC_DEF_PROM_EN) ? (EMAC_RXMBP_CAFEN_MASK) : 0x0) | 1178 ((EMAC_DEF_PROM_CH & EMAC_RXMBP_CHMASK) << \ 1179 EMAC_RXMBP_PROMCH_SHIFT) | 1180 ((EMAC_DEF_BCAST_EN) ? (EMAC_RXMBP_BROADEN_MASK) : 0x0) | 1181 ((EMAC_DEF_BCAST_CH & EMAC_RXMBP_CHMASK) << \ 1182 EMAC_RXMBP_BROADCH_SHIFT) | 1183 ((EMAC_DEF_MCAST_EN) ? (EMAC_RXMBP_MULTIEN_MASK) : 0x0) | 1184 ((EMAC_DEF_MCAST_CH & EMAC_RXMBP_CHMASK) << \ 1185 EMAC_RXMBP_MULTICH_SHIFT)); 1186 emac_write(EMAC_RXMBPENABLE, mbp_enable); 1187 emac_write(EMAC_RXMAXLEN, (EMAC_DEF_MAX_FRAME_SIZE & 1188 EMAC_RX_MAX_LEN_MASK)); 1189 emac_write(EMAC_RXBUFFEROFFSET, (EMAC_DEF_BUFFER_OFFSET & 1190 EMAC_RX_BUFFER_OFFSET_MASK)); 1191 emac_write(EMAC_RXFILTERLOWTHRESH, 0); 1192 emac_write(EMAC_RXUNICASTCLEAR, EMAC_RX_UNICAST_CLEAR_ALL); 1193 priv->rx_addr_type = (emac_read(EMAC_MACCONFIG) >> 8) & 0xFF; 1194 1195 emac_write(EMAC_MACINTMASKSET, EMAC_MAC_HOST_ERR_INTMASK_VAL); 1196 1197 emac_setmac(priv, EMAC_DEF_RX_CH, priv->mac_addr); 1198 1199 /* Enable MII */ 1200 val = emac_read(EMAC_MACCONTROL); 1201 val |= (EMAC_MACCONTROL_GMIIEN); 1202 emac_write(EMAC_MACCONTROL, val); 1203 1204 /* Enable NAPI and interrupts */ 1205 napi_enable(&priv->napi); 1206 emac_int_enable(priv); 1207 return 0; 1208 1209 } 1210 1211 /** 1212 * emac_poll - EMAC NAPI Poll function 1213 * @napi: pointer to the napi_struct containing The DaVinci EMAC network adapter 1214 * @budget: Number of receive packets to process (as told by NAPI layer) 1215 * 1216 * NAPI Poll function implemented to process packets as per budget. We check 1217 * the type of interrupt on the device and accordingly call the TX or RX 1218 * packet processing functions. We follow the budget for RX processing and 1219 * also put a cap on number of TX pkts processed through config param. The 1220 * NAPI schedule function is called if more packets pending. 1221 * 1222 * Returns number of packets received (in most cases; else TX pkts - rarely) 1223 */ 1224 static int emac_poll(struct napi_struct *napi, int budget) 1225 { 1226 unsigned int mask; 1227 struct emac_priv *priv = container_of(napi, struct emac_priv, napi); 1228 struct net_device *ndev = priv->ndev; 1229 struct device *emac_dev = &ndev->dev; 1230 u32 status = 0; 1231 u32 num_rx_pkts = 0; 1232 1233 /* Check interrupt vectors and call packet processing */ 1234 status = emac_read(EMAC_MACINVECTOR); 1235 1236 mask = EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC; 1237 1238 if (priv->version == EMAC_VERSION_2) 1239 mask = EMAC_DM646X_MAC_IN_VECTOR_TX_INT_VEC; 1240 1241 if (status & mask) { 1242 cpdma_chan_process(priv->txchan, EMAC_DEF_TX_MAX_SERVICE); 1243 } /* TX processing */ 1244 1245 mask = EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC; 1246 1247 if (priv->version == EMAC_VERSION_2) 1248 mask = EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC; 1249 1250 if (status & mask) { 1251 num_rx_pkts = cpdma_chan_process(priv->rxchan, budget); 1252 } /* RX processing */ 1253 1254 mask = EMAC_DM644X_MAC_IN_VECTOR_HOST_INT; 1255 if (priv->version == EMAC_VERSION_2) 1256 mask = EMAC_DM646X_MAC_IN_VECTOR_HOST_INT; 1257 1258 if (unlikely(status & mask)) { 1259 u32 ch, cause; 1260 dev_err(emac_dev, "DaVinci EMAC: Fatal Hardware Error\n"); 1261 netif_stop_queue(ndev); 1262 napi_disable(&priv->napi); 1263 1264 status = emac_read(EMAC_MACSTATUS); 1265 cause = ((status & EMAC_MACSTATUS_TXERRCODE_MASK) >> 1266 EMAC_MACSTATUS_TXERRCODE_SHIFT); 1267 if (cause) { 1268 ch = ((status & EMAC_MACSTATUS_TXERRCH_MASK) >> 1269 EMAC_MACSTATUS_TXERRCH_SHIFT); 1270 if (net_ratelimit()) { 1271 dev_err(emac_dev, "TX Host error %s on ch=%d\n", 1272 &emac_txhost_errcodes[cause][0], ch); 1273 } 1274 } 1275 cause = ((status & EMAC_MACSTATUS_RXERRCODE_MASK) >> 1276 EMAC_MACSTATUS_RXERRCODE_SHIFT); 1277 if (cause) { 1278 ch = ((status & EMAC_MACSTATUS_RXERRCH_MASK) >> 1279 EMAC_MACSTATUS_RXERRCH_SHIFT); 1280 if (netif_msg_hw(priv) && net_ratelimit()) 1281 dev_err(emac_dev, "RX Host error %s on ch=%d\n", 1282 &emac_rxhost_errcodes[cause][0], ch); 1283 } 1284 } else if (num_rx_pkts < budget) { 1285 napi_complete_done(napi, num_rx_pkts); 1286 emac_int_enable(priv); 1287 } 1288 1289 return num_rx_pkts; 1290 } 1291 1292 #ifdef CONFIG_NET_POLL_CONTROLLER 1293 /** 1294 * emac_poll_controller - EMAC Poll controller function 1295 * @ndev: The DaVinci EMAC network adapter 1296 * 1297 * Polled functionality used by netconsole and others in non interrupt mode 1298 * 1299 */ 1300 static void emac_poll_controller(struct net_device *ndev) 1301 { 1302 struct emac_priv *priv = netdev_priv(ndev); 1303 1304 emac_int_disable(priv); 1305 emac_irq(ndev->irq, ndev); 1306 emac_int_enable(priv); 1307 } 1308 #endif 1309 1310 static void emac_adjust_link(struct net_device *ndev) 1311 { 1312 struct emac_priv *priv = netdev_priv(ndev); 1313 struct phy_device *phydev = ndev->phydev; 1314 unsigned long flags; 1315 int new_state = 0; 1316 1317 spin_lock_irqsave(&priv->lock, flags); 1318 1319 if (phydev->link) { 1320 /* check the mode of operation - full/half duplex */ 1321 if (phydev->duplex != priv->duplex) { 1322 new_state = 1; 1323 priv->duplex = phydev->duplex; 1324 } 1325 if (phydev->speed != priv->speed) { 1326 new_state = 1; 1327 priv->speed = phydev->speed; 1328 } 1329 if (!priv->link) { 1330 new_state = 1; 1331 priv->link = 1; 1332 } 1333 1334 } else if (priv->link) { 1335 new_state = 1; 1336 priv->link = 0; 1337 priv->speed = 0; 1338 priv->duplex = ~0; 1339 } 1340 if (new_state) { 1341 emac_update_phystatus(priv); 1342 phy_print_status(ndev->phydev); 1343 } 1344 1345 spin_unlock_irqrestore(&priv->lock, flags); 1346 } 1347 1348 /************************************************************************* 1349 * Linux Driver Model 1350 *************************************************************************/ 1351 1352 /** 1353 * emac_devioctl - EMAC adapter ioctl 1354 * @ndev: The DaVinci EMAC network adapter 1355 * @ifrq: request parameter 1356 * @cmd: command parameter 1357 * 1358 * EMAC driver ioctl function 1359 * 1360 * Returns success(0) or appropriate error code 1361 */ 1362 static int emac_devioctl(struct net_device *ndev, struct ifreq *ifrq, int cmd) 1363 { 1364 if (!(netif_running(ndev))) 1365 return -EINVAL; 1366 1367 /* TODO: Add phy read and write and private statistics get feature */ 1368 1369 if (ndev->phydev) 1370 return phy_mii_ioctl(ndev->phydev, ifrq, cmd); 1371 else 1372 return -EOPNOTSUPP; 1373 } 1374 1375 static int match_first_device(struct device *dev, const void *data) 1376 { 1377 if (dev->parent && dev->parent->of_node) 1378 return of_device_is_compatible(dev->parent->of_node, 1379 "ti,davinci_mdio"); 1380 1381 return !strncmp(dev_name(dev), "davinci_mdio", 12); 1382 } 1383 1384 /** 1385 * emac_dev_open - EMAC device open 1386 * @ndev: The DaVinci EMAC network adapter 1387 * 1388 * Called when system wants to start the interface. We init TX/RX channels 1389 * and enable the hardware for packet reception/transmission and start the 1390 * network queue. 1391 * 1392 * Returns 0 for a successful open, or appropriate error code 1393 */ 1394 static int emac_dev_open(struct net_device *ndev) 1395 { 1396 struct device *emac_dev = &ndev->dev; 1397 u32 cnt; 1398 struct resource *res; 1399 int q, m, ret; 1400 int res_num = 0, irq_num = 0; 1401 int i = 0; 1402 struct emac_priv *priv = netdev_priv(ndev); 1403 struct phy_device *phydev = NULL; 1404 struct device *phy = NULL; 1405 1406 ret = pm_runtime_get_sync(&priv->pdev->dev); 1407 if (ret < 0) { 1408 pm_runtime_put_noidle(&priv->pdev->dev); 1409 dev_err(&priv->pdev->dev, "%s: failed to get_sync(%d)\n", 1410 __func__, ret); 1411 return ret; 1412 } 1413 1414 netif_carrier_off(ndev); 1415 for (cnt = 0; cnt < ETH_ALEN; cnt++) 1416 ndev->dev_addr[cnt] = priv->mac_addr[cnt]; 1417 1418 /* Configuration items */ 1419 priv->rx_buf_size = EMAC_DEF_MAX_FRAME_SIZE + NET_IP_ALIGN; 1420 1421 priv->mac_hash1 = 0; 1422 priv->mac_hash2 = 0; 1423 emac_write(EMAC_MACHASH1, 0); 1424 emac_write(EMAC_MACHASH2, 0); 1425 1426 for (i = 0; i < EMAC_DEF_RX_NUM_DESC; i++) { 1427 struct sk_buff *skb = emac_rx_alloc(priv); 1428 1429 if (!skb) 1430 break; 1431 1432 ret = cpdma_chan_idle_submit(priv->rxchan, skb, skb->data, 1433 skb_tailroom(skb), 0); 1434 if (WARN_ON(ret < 0)) 1435 break; 1436 } 1437 1438 /* Request IRQ */ 1439 while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, 1440 res_num))) { 1441 for (irq_num = res->start; irq_num <= res->end; irq_num++) { 1442 if (request_irq(irq_num, emac_irq, 0, ndev->name, 1443 ndev)) { 1444 dev_err(emac_dev, 1445 "DaVinci EMAC: request_irq() failed\n"); 1446 ret = -EBUSY; 1447 1448 goto rollback; 1449 } 1450 } 1451 res_num++; 1452 } 1453 /* prepare counters for rollback in case of an error */ 1454 res_num--; 1455 irq_num--; 1456 1457 /* Start/Enable EMAC hardware */ 1458 emac_hw_enable(priv); 1459 1460 /* Enable Interrupt pacing if configured */ 1461 if (priv->coal_intvl != 0) { 1462 struct ethtool_coalesce coal; 1463 1464 coal.rx_coalesce_usecs = (priv->coal_intvl << 4); 1465 emac_set_coalesce(ndev, &coal); 1466 } 1467 1468 cpdma_ctlr_start(priv->dma); 1469 1470 if (priv->phy_node) { 1471 phydev = of_phy_connect(ndev, priv->phy_node, 1472 &emac_adjust_link, 0, 0); 1473 if (!phydev) { 1474 dev_err(emac_dev, "could not connect to phy %pOF\n", 1475 priv->phy_node); 1476 ret = -ENODEV; 1477 goto err; 1478 } 1479 } 1480 1481 /* use the first phy on the bus if pdata did not give us a phy id */ 1482 if (!phydev && !priv->phy_id) { 1483 /* NOTE: we can't use bus_find_device_by_name() here because 1484 * the device name is not guaranteed to be 'davinci_mdio'. On 1485 * some systems it can be 'davinci_mdio.0' so we need to use 1486 * strncmp() against the first part of the string to correctly 1487 * match it. 1488 */ 1489 phy = bus_find_device(&mdio_bus_type, NULL, NULL, 1490 match_first_device); 1491 if (phy) { 1492 priv->phy_id = dev_name(phy); 1493 if (!priv->phy_id || !*priv->phy_id) 1494 put_device(phy); 1495 } 1496 } 1497 1498 if (!phydev && priv->phy_id && *priv->phy_id) { 1499 phydev = phy_connect(ndev, priv->phy_id, 1500 &emac_adjust_link, 1501 PHY_INTERFACE_MODE_MII); 1502 put_device(phy); /* reference taken by bus_find_device */ 1503 if (IS_ERR(phydev)) { 1504 dev_err(emac_dev, "could not connect to phy %s\n", 1505 priv->phy_id); 1506 ret = PTR_ERR(phydev); 1507 goto err; 1508 } 1509 1510 priv->link = 0; 1511 priv->speed = 0; 1512 priv->duplex = ~0; 1513 1514 phy_attached_info(phydev); 1515 } 1516 1517 if (!phydev) { 1518 /* No PHY , fix the link, speed and duplex settings */ 1519 dev_notice(emac_dev, "no phy, defaulting to 100/full\n"); 1520 priv->link = 1; 1521 priv->speed = SPEED_100; 1522 priv->duplex = DUPLEX_FULL; 1523 emac_update_phystatus(priv); 1524 } 1525 1526 if (netif_msg_drv(priv)) 1527 dev_notice(emac_dev, "DaVinci EMAC: Opened %s\n", ndev->name); 1528 1529 if (phydev) 1530 phy_start(phydev); 1531 1532 return 0; 1533 1534 err: 1535 emac_int_disable(priv); 1536 napi_disable(&priv->napi); 1537 1538 rollback: 1539 for (q = res_num; q >= 0; q--) { 1540 res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, q); 1541 /* at the first iteration, irq_num is already set to the 1542 * right value 1543 */ 1544 if (q != res_num) 1545 irq_num = res->end; 1546 1547 for (m = irq_num; m >= res->start; m--) 1548 free_irq(m, ndev); 1549 } 1550 cpdma_ctlr_stop(priv->dma); 1551 pm_runtime_put(&priv->pdev->dev); 1552 return ret; 1553 } 1554 1555 /** 1556 * emac_dev_stop - EMAC device stop 1557 * @ndev: The DaVinci EMAC network adapter 1558 * 1559 * Called when system wants to stop or down the interface. We stop the network 1560 * queue, disable interrupts and cleanup TX/RX channels. 1561 * 1562 * We return the statistics in net_device_stats structure pulled from emac 1563 */ 1564 static int emac_dev_stop(struct net_device *ndev) 1565 { 1566 struct resource *res; 1567 int i = 0; 1568 int irq_num; 1569 struct emac_priv *priv = netdev_priv(ndev); 1570 struct device *emac_dev = &ndev->dev; 1571 1572 /* inform the upper layers. */ 1573 netif_stop_queue(ndev); 1574 napi_disable(&priv->napi); 1575 1576 netif_carrier_off(ndev); 1577 emac_int_disable(priv); 1578 cpdma_ctlr_stop(priv->dma); 1579 emac_write(EMAC_SOFTRESET, 1); 1580 1581 if (ndev->phydev) 1582 phy_disconnect(ndev->phydev); 1583 1584 /* Free IRQ */ 1585 while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, i))) { 1586 for (irq_num = res->start; irq_num <= res->end; irq_num++) 1587 free_irq(irq_num, priv->ndev); 1588 i++; 1589 } 1590 1591 if (netif_msg_drv(priv)) 1592 dev_notice(emac_dev, "DaVinci EMAC: %s stopped\n", ndev->name); 1593 1594 pm_runtime_put(&priv->pdev->dev); 1595 return 0; 1596 } 1597 1598 /** 1599 * emac_dev_getnetstats - EMAC get statistics function 1600 * @ndev: The DaVinci EMAC network adapter 1601 * 1602 * Called when system wants to get statistics from the device. 1603 * 1604 * We return the statistics in net_device_stats structure pulled from emac 1605 */ 1606 static struct net_device_stats *emac_dev_getnetstats(struct net_device *ndev) 1607 { 1608 struct emac_priv *priv = netdev_priv(ndev); 1609 u32 mac_control; 1610 u32 stats_clear_mask; 1611 int err; 1612 1613 err = pm_runtime_get_sync(&priv->pdev->dev); 1614 if (err < 0) { 1615 pm_runtime_put_noidle(&priv->pdev->dev); 1616 dev_err(&priv->pdev->dev, "%s: failed to get_sync(%d)\n", 1617 __func__, err); 1618 return &ndev->stats; 1619 } 1620 1621 /* update emac hardware stats and reset the registers*/ 1622 1623 mac_control = emac_read(EMAC_MACCONTROL); 1624 1625 if (mac_control & EMAC_MACCONTROL_GMIIEN) 1626 stats_clear_mask = EMAC_STATS_CLR_MASK; 1627 else 1628 stats_clear_mask = 0; 1629 1630 ndev->stats.multicast += emac_read(EMAC_RXMCASTFRAMES); 1631 emac_write(EMAC_RXMCASTFRAMES, stats_clear_mask); 1632 1633 ndev->stats.collisions += (emac_read(EMAC_TXCOLLISION) + 1634 emac_read(EMAC_TXSINGLECOLL) + 1635 emac_read(EMAC_TXMULTICOLL)); 1636 emac_write(EMAC_TXCOLLISION, stats_clear_mask); 1637 emac_write(EMAC_TXSINGLECOLL, stats_clear_mask); 1638 emac_write(EMAC_TXMULTICOLL, stats_clear_mask); 1639 1640 ndev->stats.rx_length_errors += (emac_read(EMAC_RXOVERSIZED) + 1641 emac_read(EMAC_RXJABBER) + 1642 emac_read(EMAC_RXUNDERSIZED)); 1643 emac_write(EMAC_RXOVERSIZED, stats_clear_mask); 1644 emac_write(EMAC_RXJABBER, stats_clear_mask); 1645 emac_write(EMAC_RXUNDERSIZED, stats_clear_mask); 1646 1647 ndev->stats.rx_over_errors += (emac_read(EMAC_RXSOFOVERRUNS) + 1648 emac_read(EMAC_RXMOFOVERRUNS)); 1649 emac_write(EMAC_RXSOFOVERRUNS, stats_clear_mask); 1650 emac_write(EMAC_RXMOFOVERRUNS, stats_clear_mask); 1651 1652 ndev->stats.rx_fifo_errors += emac_read(EMAC_RXDMAOVERRUNS); 1653 emac_write(EMAC_RXDMAOVERRUNS, stats_clear_mask); 1654 1655 ndev->stats.tx_carrier_errors += 1656 emac_read(EMAC_TXCARRIERSENSE); 1657 emac_write(EMAC_TXCARRIERSENSE, stats_clear_mask); 1658 1659 ndev->stats.tx_fifo_errors += emac_read(EMAC_TXUNDERRUN); 1660 emac_write(EMAC_TXUNDERRUN, stats_clear_mask); 1661 1662 pm_runtime_put(&priv->pdev->dev); 1663 1664 return &ndev->stats; 1665 } 1666 1667 static const struct net_device_ops emac_netdev_ops = { 1668 .ndo_open = emac_dev_open, 1669 .ndo_stop = emac_dev_stop, 1670 .ndo_start_xmit = emac_dev_xmit, 1671 .ndo_set_rx_mode = emac_dev_mcast_set, 1672 .ndo_set_mac_address = emac_dev_setmac_addr, 1673 .ndo_do_ioctl = emac_devioctl, 1674 .ndo_tx_timeout = emac_dev_tx_timeout, 1675 .ndo_get_stats = emac_dev_getnetstats, 1676 #ifdef CONFIG_NET_POLL_CONTROLLER 1677 .ndo_poll_controller = emac_poll_controller, 1678 #endif 1679 }; 1680 1681 static const struct of_device_id davinci_emac_of_match[]; 1682 1683 static struct emac_platform_data * 1684 davinci_emac_of_get_pdata(struct platform_device *pdev, struct emac_priv *priv) 1685 { 1686 struct device_node *np; 1687 const struct of_device_id *match; 1688 const struct emac_platform_data *auxdata; 1689 struct emac_platform_data *pdata = NULL; 1690 1691 if (!IS_ENABLED(CONFIG_OF) || !pdev->dev.of_node) 1692 return dev_get_platdata(&pdev->dev); 1693 1694 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); 1695 if (!pdata) 1696 return NULL; 1697 1698 np = pdev->dev.of_node; 1699 pdata->version = EMAC_VERSION_2; 1700 1701 if (!is_valid_ether_addr(pdata->mac_addr)) 1702 of_get_mac_address(np, pdata->mac_addr); 1703 1704 of_property_read_u32(np, "ti,davinci-ctrl-reg-offset", 1705 &pdata->ctrl_reg_offset); 1706 1707 of_property_read_u32(np, "ti,davinci-ctrl-mod-reg-offset", 1708 &pdata->ctrl_mod_reg_offset); 1709 1710 of_property_read_u32(np, "ti,davinci-ctrl-ram-offset", 1711 &pdata->ctrl_ram_offset); 1712 1713 of_property_read_u32(np, "ti,davinci-ctrl-ram-size", 1714 &pdata->ctrl_ram_size); 1715 1716 of_property_read_u8(np, "ti,davinci-rmii-en", &pdata->rmii_en); 1717 1718 pdata->no_bd_ram = of_property_read_bool(np, "ti,davinci-no-bd-ram"); 1719 1720 priv->phy_node = of_parse_phandle(np, "phy-handle", 0); 1721 if (!priv->phy_node) { 1722 if (!of_phy_is_fixed_link(np)) 1723 pdata->phy_id = NULL; 1724 else if (of_phy_register_fixed_link(np) >= 0) 1725 priv->phy_node = of_node_get(np); 1726 } 1727 1728 auxdata = pdev->dev.platform_data; 1729 if (auxdata) { 1730 pdata->interrupt_enable = auxdata->interrupt_enable; 1731 pdata->interrupt_disable = auxdata->interrupt_disable; 1732 } 1733 1734 match = of_match_device(davinci_emac_of_match, &pdev->dev); 1735 if (match && match->data) { 1736 auxdata = match->data; 1737 pdata->version = auxdata->version; 1738 pdata->hw_ram_addr = auxdata->hw_ram_addr; 1739 } 1740 1741 return pdata; 1742 } 1743 1744 static int davinci_emac_try_get_mac(struct platform_device *pdev, 1745 int instance, u8 *mac_addr) 1746 { 1747 if (!pdev->dev.of_node) 1748 return -EINVAL; 1749 1750 return ti_cm_get_macid(&pdev->dev, instance, mac_addr); 1751 } 1752 1753 /** 1754 * davinci_emac_probe - EMAC device probe 1755 * @pdev: The DaVinci EMAC device that we are removing 1756 * 1757 * Called when probing for emac devicesr. We get details of instances and 1758 * resource information from platform init and register a network device 1759 * and allocate resources necessary for driver to perform 1760 */ 1761 static int davinci_emac_probe(struct platform_device *pdev) 1762 { 1763 struct device_node *np = pdev->dev.of_node; 1764 int rc = 0; 1765 struct resource *res, *res_ctrl; 1766 struct net_device *ndev; 1767 struct emac_priv *priv; 1768 unsigned long hw_ram_addr; 1769 struct emac_platform_data *pdata; 1770 struct cpdma_params dma_params; 1771 struct clk *emac_clk; 1772 unsigned long emac_bus_frequency; 1773 1774 1775 /* obtain emac clock from kernel */ 1776 emac_clk = devm_clk_get(&pdev->dev, NULL); 1777 if (IS_ERR(emac_clk)) { 1778 dev_err(&pdev->dev, "failed to get EMAC clock\n"); 1779 return -EBUSY; 1780 } 1781 emac_bus_frequency = clk_get_rate(emac_clk); 1782 devm_clk_put(&pdev->dev, emac_clk); 1783 1784 /* TODO: Probe PHY here if possible */ 1785 1786 ndev = alloc_etherdev(sizeof(struct emac_priv)); 1787 if (!ndev) 1788 return -ENOMEM; 1789 1790 platform_set_drvdata(pdev, ndev); 1791 priv = netdev_priv(ndev); 1792 priv->pdev = pdev; 1793 priv->ndev = ndev; 1794 priv->msg_enable = netif_msg_init(debug_level, DAVINCI_EMAC_DEBUG); 1795 1796 spin_lock_init(&priv->lock); 1797 1798 pdata = davinci_emac_of_get_pdata(pdev, priv); 1799 if (!pdata) { 1800 dev_err(&pdev->dev, "no platform data\n"); 1801 rc = -ENODEV; 1802 goto err_free_netdev; 1803 } 1804 1805 /* MAC addr and PHY mask , RMII enable info from platform_data */ 1806 memcpy(priv->mac_addr, pdata->mac_addr, ETH_ALEN); 1807 priv->phy_id = pdata->phy_id; 1808 priv->rmii_en = pdata->rmii_en; 1809 priv->version = pdata->version; 1810 priv->int_enable = pdata->interrupt_enable; 1811 priv->int_disable = pdata->interrupt_disable; 1812 1813 priv->coal_intvl = 0; 1814 priv->bus_freq_mhz = (u32)(emac_bus_frequency / 1000000); 1815 1816 /* Get EMAC platform data */ 1817 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 1818 priv->emac_base_phys = res->start + pdata->ctrl_reg_offset; 1819 priv->remap_addr = devm_ioremap_resource(&pdev->dev, res); 1820 if (IS_ERR(priv->remap_addr)) { 1821 rc = PTR_ERR(priv->remap_addr); 1822 goto no_pdata; 1823 } 1824 1825 res_ctrl = platform_get_resource(pdev, IORESOURCE_MEM, 1); 1826 if (res_ctrl) { 1827 priv->ctrl_base = 1828 devm_ioremap_resource(&pdev->dev, res_ctrl); 1829 if (IS_ERR(priv->ctrl_base)) { 1830 rc = PTR_ERR(priv->ctrl_base); 1831 goto no_pdata; 1832 } 1833 } else { 1834 priv->ctrl_base = priv->remap_addr + pdata->ctrl_mod_reg_offset; 1835 } 1836 1837 priv->emac_base = priv->remap_addr + pdata->ctrl_reg_offset; 1838 ndev->base_addr = (unsigned long)priv->remap_addr; 1839 1840 hw_ram_addr = pdata->hw_ram_addr; 1841 if (!hw_ram_addr) 1842 hw_ram_addr = (u32 __force)res->start + pdata->ctrl_ram_offset; 1843 1844 memset(&dma_params, 0, sizeof(dma_params)); 1845 dma_params.dev = &pdev->dev; 1846 dma_params.dmaregs = priv->emac_base; 1847 dma_params.rxthresh = priv->emac_base + 0x120; 1848 dma_params.rxfree = priv->emac_base + 0x140; 1849 dma_params.txhdp = priv->emac_base + 0x600; 1850 dma_params.rxhdp = priv->emac_base + 0x620; 1851 dma_params.txcp = priv->emac_base + 0x640; 1852 dma_params.rxcp = priv->emac_base + 0x660; 1853 dma_params.num_chan = EMAC_MAX_TXRX_CHANNELS; 1854 dma_params.min_packet_size = EMAC_DEF_MIN_ETHPKTSIZE; 1855 dma_params.desc_hw_addr = hw_ram_addr; 1856 dma_params.desc_mem_size = pdata->ctrl_ram_size; 1857 dma_params.desc_align = 16; 1858 1859 dma_params.desc_mem_phys = pdata->no_bd_ram ? 0 : 1860 (u32 __force)res->start + pdata->ctrl_ram_offset; 1861 1862 priv->dma = cpdma_ctlr_create(&dma_params); 1863 if (!priv->dma) { 1864 dev_err(&pdev->dev, "error initializing DMA\n"); 1865 rc = -ENOMEM; 1866 goto no_pdata; 1867 } 1868 1869 priv->txchan = cpdma_chan_create(priv->dma, EMAC_DEF_TX_CH, 1870 emac_tx_handler, 0); 1871 if (IS_ERR(priv->txchan)) { 1872 dev_err(&pdev->dev, "error initializing tx dma channel\n"); 1873 rc = PTR_ERR(priv->txchan); 1874 goto err_free_dma; 1875 } 1876 1877 priv->rxchan = cpdma_chan_create(priv->dma, EMAC_DEF_RX_CH, 1878 emac_rx_handler, 1); 1879 if (IS_ERR(priv->rxchan)) { 1880 dev_err(&pdev->dev, "error initializing rx dma channel\n"); 1881 rc = PTR_ERR(priv->rxchan); 1882 goto err_free_txchan; 1883 } 1884 1885 res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); 1886 if (!res) { 1887 dev_err(&pdev->dev, "error getting irq res\n"); 1888 rc = -ENOENT; 1889 goto err_free_rxchan; 1890 } 1891 ndev->irq = res->start; 1892 1893 rc = davinci_emac_try_get_mac(pdev, res_ctrl ? 0 : 1, priv->mac_addr); 1894 if (!rc) 1895 ether_addr_copy(ndev->dev_addr, priv->mac_addr); 1896 1897 if (!is_valid_ether_addr(priv->mac_addr)) { 1898 /* Use random MAC if still none obtained. */ 1899 eth_hw_addr_random(ndev); 1900 memcpy(priv->mac_addr, ndev->dev_addr, ndev->addr_len); 1901 dev_warn(&pdev->dev, "using random MAC addr: %pM\n", 1902 priv->mac_addr); 1903 } 1904 1905 ndev->netdev_ops = &emac_netdev_ops; 1906 ndev->ethtool_ops = ðtool_ops; 1907 netif_napi_add(ndev, &priv->napi, emac_poll, EMAC_POLL_WEIGHT); 1908 1909 pm_runtime_enable(&pdev->dev); 1910 rc = pm_runtime_get_sync(&pdev->dev); 1911 if (rc < 0) { 1912 pm_runtime_put_noidle(&pdev->dev); 1913 dev_err(&pdev->dev, "%s: failed to get_sync(%d)\n", 1914 __func__, rc); 1915 goto err_napi_del; 1916 } 1917 1918 /* register the network device */ 1919 SET_NETDEV_DEV(ndev, &pdev->dev); 1920 rc = register_netdev(ndev); 1921 if (rc) { 1922 dev_err(&pdev->dev, "error in register_netdev\n"); 1923 rc = -ENODEV; 1924 pm_runtime_put(&pdev->dev); 1925 goto err_napi_del; 1926 } 1927 1928 1929 if (netif_msg_probe(priv)) { 1930 dev_notice(&pdev->dev, "DaVinci EMAC Probe found device " 1931 "(regs: %pa, irq: %d)\n", 1932 &priv->emac_base_phys, ndev->irq); 1933 } 1934 pm_runtime_put(&pdev->dev); 1935 1936 return 0; 1937 1938 err_napi_del: 1939 netif_napi_del(&priv->napi); 1940 err_free_rxchan: 1941 cpdma_chan_destroy(priv->rxchan); 1942 err_free_txchan: 1943 cpdma_chan_destroy(priv->txchan); 1944 err_free_dma: 1945 cpdma_ctlr_destroy(priv->dma); 1946 no_pdata: 1947 if (of_phy_is_fixed_link(np)) 1948 of_phy_deregister_fixed_link(np); 1949 of_node_put(priv->phy_node); 1950 err_free_netdev: 1951 free_netdev(ndev); 1952 return rc; 1953 } 1954 1955 /** 1956 * davinci_emac_remove - EMAC device remove 1957 * @pdev: The DaVinci EMAC device that we are removing 1958 * 1959 * Called when removing the device driver. We disable clock usage and release 1960 * the resources taken up by the driver and unregister network device 1961 */ 1962 static int davinci_emac_remove(struct platform_device *pdev) 1963 { 1964 struct net_device *ndev = platform_get_drvdata(pdev); 1965 struct emac_priv *priv = netdev_priv(ndev); 1966 struct device_node *np = pdev->dev.of_node; 1967 1968 dev_notice(&ndev->dev, "DaVinci EMAC: davinci_emac_remove()\n"); 1969 1970 if (priv->txchan) 1971 cpdma_chan_destroy(priv->txchan); 1972 if (priv->rxchan) 1973 cpdma_chan_destroy(priv->rxchan); 1974 cpdma_ctlr_destroy(priv->dma); 1975 1976 unregister_netdev(ndev); 1977 of_node_put(priv->phy_node); 1978 pm_runtime_disable(&pdev->dev); 1979 if (of_phy_is_fixed_link(np)) 1980 of_phy_deregister_fixed_link(np); 1981 free_netdev(ndev); 1982 1983 return 0; 1984 } 1985 1986 static int davinci_emac_suspend(struct device *dev) 1987 { 1988 struct net_device *ndev = dev_get_drvdata(dev); 1989 1990 if (netif_running(ndev)) 1991 emac_dev_stop(ndev); 1992 1993 return 0; 1994 } 1995 1996 static int davinci_emac_resume(struct device *dev) 1997 { 1998 struct net_device *ndev = dev_get_drvdata(dev); 1999 2000 if (netif_running(ndev)) 2001 emac_dev_open(ndev); 2002 2003 return 0; 2004 } 2005 2006 static const struct dev_pm_ops davinci_emac_pm_ops = { 2007 .suspend = davinci_emac_suspend, 2008 .resume = davinci_emac_resume, 2009 }; 2010 2011 static const struct emac_platform_data am3517_emac_data = { 2012 .version = EMAC_VERSION_2, 2013 .hw_ram_addr = 0x01e20000, 2014 }; 2015 2016 static const struct emac_platform_data dm816_emac_data = { 2017 .version = EMAC_VERSION_2, 2018 }; 2019 2020 static const struct of_device_id davinci_emac_of_match[] = { 2021 {.compatible = "ti,davinci-dm6467-emac", }, 2022 {.compatible = "ti,am3517-emac", .data = &am3517_emac_data, }, 2023 {.compatible = "ti,dm816-emac", .data = &dm816_emac_data, }, 2024 {}, 2025 }; 2026 MODULE_DEVICE_TABLE(of, davinci_emac_of_match); 2027 2028 /* davinci_emac_driver: EMAC platform driver structure */ 2029 static struct platform_driver davinci_emac_driver = { 2030 .driver = { 2031 .name = "davinci_emac", 2032 .pm = &davinci_emac_pm_ops, 2033 .of_match_table = davinci_emac_of_match, 2034 }, 2035 .probe = davinci_emac_probe, 2036 .remove = davinci_emac_remove, 2037 }; 2038 2039 /** 2040 * davinci_emac_init - EMAC driver module init 2041 * 2042 * Called when initializing the driver. We register the driver with 2043 * the platform. 2044 */ 2045 static int __init davinci_emac_init(void) 2046 { 2047 return platform_driver_register(&davinci_emac_driver); 2048 } 2049 late_initcall(davinci_emac_init); 2050 2051 /** 2052 * davinci_emac_exit - EMAC driver module exit 2053 * 2054 * Called when exiting the driver completely. We unregister the driver with 2055 * the platform and exit 2056 */ 2057 static void __exit davinci_emac_exit(void) 2058 { 2059 platform_driver_unregister(&davinci_emac_driver); 2060 } 2061 module_exit(davinci_emac_exit); 2062 2063 MODULE_LICENSE("GPL"); 2064 MODULE_AUTHOR("DaVinci EMAC Maintainer: Anant Gole <anantgole@ti.com>"); 2065 MODULE_AUTHOR("DaVinci EMAC Maintainer: Chaithrika U S <chaithrika@ti.com>"); 2066 MODULE_DESCRIPTION("DaVinci EMAC Ethernet driver"); 2067