1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * DaVinci Ethernet Medium Access Controller 4 * 5 * DaVinci EMAC is based upon CPPI 3.0 TI DMA engine 6 * 7 * Copyright (C) 2009 Texas Instruments. 8 * 9 * --------------------------------------------------------------------------- 10 * History: 11 * 0-5 A number of folks worked on this driver in bits and pieces but the major 12 * contribution came from Suraj Iyer and Anant Gole 13 * 6.0 Anant Gole - rewrote the driver as per Linux conventions 14 * 6.1 Chaithrika U S - added support for Gigabit and RMII features, 15 * PHY layer usage 16 */ 17 18 #include <linux/module.h> 19 #include <linux/kernel.h> 20 #include <linux/sched.h> 21 #include <linux/string.h> 22 #include <linux/timer.h> 23 #include <linux/errno.h> 24 #include <linux/in.h> 25 #include <linux/ioport.h> 26 #include <linux/slab.h> 27 #include <linux/mm.h> 28 #include <linux/interrupt.h> 29 #include <linux/init.h> 30 #include <linux/netdevice.h> 31 #include <linux/etherdevice.h> 32 #include <linux/skbuff.h> 33 #include <linux/ethtool.h> 34 #include <linux/highmem.h> 35 #include <linux/proc_fs.h> 36 #include <linux/ctype.h> 37 #include <linux/spinlock.h> 38 #include <linux/dma-mapping.h> 39 #include <linux/clk.h> 40 #include <linux/platform_device.h> 41 #include <linux/regmap.h> 42 #include <linux/semaphore.h> 43 #include <linux/phy.h> 44 #include <linux/bitops.h> 45 #include <linux/io.h> 46 #include <linux/uaccess.h> 47 #include <linux/pm_runtime.h> 48 #include <linux/davinci_emac.h> 49 #include <linux/of.h> 50 #include <linux/of_address.h> 51 #include <linux/of_device.h> 52 #include <linux/of_mdio.h> 53 #include <linux/of_irq.h> 54 #include <linux/of_net.h> 55 #include <linux/mfd/syscon.h> 56 57 #include <asm/irq.h> 58 #include <asm/page.h> 59 60 #include "cpsw.h" 61 #include "davinci_cpdma.h" 62 63 static int debug_level; 64 module_param(debug_level, int, 0); 65 MODULE_PARM_DESC(debug_level, "DaVinci EMAC debug level (NETIF_MSG bits)"); 66 67 /* Netif debug messages possible */ 68 #define DAVINCI_EMAC_DEBUG (NETIF_MSG_DRV | \ 69 NETIF_MSG_PROBE | \ 70 NETIF_MSG_LINK | \ 71 NETIF_MSG_TIMER | \ 72 NETIF_MSG_IFDOWN | \ 73 NETIF_MSG_IFUP | \ 74 NETIF_MSG_RX_ERR | \ 75 NETIF_MSG_TX_ERR | \ 76 NETIF_MSG_TX_QUEUED | \ 77 NETIF_MSG_INTR | \ 78 NETIF_MSG_TX_DONE | \ 79 NETIF_MSG_RX_STATUS | \ 80 NETIF_MSG_PKTDATA | \ 81 NETIF_MSG_HW | \ 82 NETIF_MSG_WOL) 83 84 /* version info */ 85 #define EMAC_MAJOR_VERSION 6 86 #define EMAC_MINOR_VERSION 1 87 #define EMAC_MODULE_VERSION "6.1" 88 MODULE_VERSION(EMAC_MODULE_VERSION); 89 static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1"; 90 91 /* Configuration items */ 92 #define EMAC_DEF_PASS_CRC (0) /* Do not pass CRC up to frames */ 93 #define EMAC_DEF_QOS_EN (0) /* EMAC proprietary QoS disabled */ 94 #define EMAC_DEF_NO_BUFF_CHAIN (0) /* No buffer chain */ 95 #define EMAC_DEF_MACCTRL_FRAME_EN (0) /* Discard Maccontrol frames */ 96 #define EMAC_DEF_SHORT_FRAME_EN (0) /* Discard short frames */ 97 #define EMAC_DEF_ERROR_FRAME_EN (0) /* Discard error frames */ 98 #define EMAC_DEF_PROM_EN (0) /* Promiscuous disabled */ 99 #define EMAC_DEF_PROM_CH (0) /* Promiscuous channel is 0 */ 100 #define EMAC_DEF_BCAST_EN (1) /* Broadcast enabled */ 101 #define EMAC_DEF_BCAST_CH (0) /* Broadcast channel is 0 */ 102 #define EMAC_DEF_MCAST_EN (1) /* Multicast enabled */ 103 #define EMAC_DEF_MCAST_CH (0) /* Multicast channel is 0 */ 104 105 #define EMAC_DEF_TXPRIO_FIXED (1) /* TX Priority is fixed */ 106 #define EMAC_DEF_TXPACING_EN (0) /* TX pacing NOT supported*/ 107 108 #define EMAC_DEF_BUFFER_OFFSET (0) /* Buffer offset to DMA (future) */ 109 #define EMAC_DEF_MIN_ETHPKTSIZE (60) /* Minimum ethernet pkt size */ 110 #define EMAC_DEF_MAX_FRAME_SIZE (1500 + 14 + 4 + 4) 111 #define EMAC_DEF_TX_CH (0) /* Default 0th channel */ 112 #define EMAC_DEF_RX_CH (0) /* Default 0th channel */ 113 #define EMAC_DEF_RX_NUM_DESC (128) 114 #define EMAC_DEF_MAX_TX_CH (1) /* Max TX channels configured */ 115 #define EMAC_DEF_MAX_RX_CH (1) /* Max RX channels configured */ 116 #define EMAC_POLL_WEIGHT (64) /* Default NAPI poll weight */ 117 118 /* Buffer descriptor parameters */ 119 #define EMAC_DEF_TX_MAX_SERVICE (32) /* TX max service BD's */ 120 #define EMAC_DEF_RX_MAX_SERVICE (64) /* should = netdev->weight */ 121 122 /* EMAC register related defines */ 123 #define EMAC_ALL_MULTI_REG_VALUE (0xFFFFFFFF) 124 #define EMAC_NUM_MULTICAST_BITS (64) 125 #define EMAC_TX_CONTROL_TX_ENABLE_VAL (0x1) 126 #define EMAC_RX_CONTROL_RX_ENABLE_VAL (0x1) 127 #define EMAC_MAC_HOST_ERR_INTMASK_VAL (0x2) 128 #define EMAC_RX_UNICAST_CLEAR_ALL (0xFF) 129 #define EMAC_INT_MASK_CLEAR (0xFF) 130 131 /* RX MBP register bit positions */ 132 #define EMAC_RXMBP_PASSCRC_MASK BIT(30) 133 #define EMAC_RXMBP_QOSEN_MASK BIT(29) 134 #define EMAC_RXMBP_NOCHAIN_MASK BIT(28) 135 #define EMAC_RXMBP_CMFEN_MASK BIT(24) 136 #define EMAC_RXMBP_CSFEN_MASK BIT(23) 137 #define EMAC_RXMBP_CEFEN_MASK BIT(22) 138 #define EMAC_RXMBP_CAFEN_MASK BIT(21) 139 #define EMAC_RXMBP_PROMCH_SHIFT (16) 140 #define EMAC_RXMBP_PROMCH_MASK (0x7 << 16) 141 #define EMAC_RXMBP_BROADEN_MASK BIT(13) 142 #define EMAC_RXMBP_BROADCH_SHIFT (8) 143 #define EMAC_RXMBP_BROADCH_MASK (0x7 << 8) 144 #define EMAC_RXMBP_MULTIEN_MASK BIT(5) 145 #define EMAC_RXMBP_MULTICH_SHIFT (0) 146 #define EMAC_RXMBP_MULTICH_MASK (0x7) 147 #define EMAC_RXMBP_CHMASK (0x7) 148 149 /* EMAC register definitions/bit maps used */ 150 # define EMAC_MBP_RXPROMISC (0x00200000) 151 # define EMAC_MBP_PROMISCCH(ch) (((ch) & 0x7) << 16) 152 # define EMAC_MBP_RXBCAST (0x00002000) 153 # define EMAC_MBP_BCASTCHAN(ch) (((ch) & 0x7) << 8) 154 # define EMAC_MBP_RXMCAST (0x00000020) 155 # define EMAC_MBP_MCASTCHAN(ch) ((ch) & 0x7) 156 157 /* EMAC mac_control register */ 158 #define EMAC_MACCONTROL_TXPTYPE BIT(9) 159 #define EMAC_MACCONTROL_TXPACEEN BIT(6) 160 #define EMAC_MACCONTROL_GMIIEN BIT(5) 161 #define EMAC_MACCONTROL_GIGABITEN BIT(7) 162 #define EMAC_MACCONTROL_FULLDUPLEXEN BIT(0) 163 #define EMAC_MACCONTROL_RMIISPEED_MASK BIT(15) 164 165 /* GIGABIT MODE related bits */ 166 #define EMAC_DM646X_MACCONTORL_GIG BIT(7) 167 #define EMAC_DM646X_MACCONTORL_GIGFORCE BIT(17) 168 169 /* EMAC mac_status register */ 170 #define EMAC_MACSTATUS_TXERRCODE_MASK (0xF00000) 171 #define EMAC_MACSTATUS_TXERRCODE_SHIFT (20) 172 #define EMAC_MACSTATUS_TXERRCH_MASK (0x7) 173 #define EMAC_MACSTATUS_TXERRCH_SHIFT (16) 174 #define EMAC_MACSTATUS_RXERRCODE_MASK (0xF000) 175 #define EMAC_MACSTATUS_RXERRCODE_SHIFT (12) 176 #define EMAC_MACSTATUS_RXERRCH_MASK (0x7) 177 #define EMAC_MACSTATUS_RXERRCH_SHIFT (8) 178 179 /* EMAC RX register masks */ 180 #define EMAC_RX_MAX_LEN_MASK (0xFFFF) 181 #define EMAC_RX_BUFFER_OFFSET_MASK (0xFFFF) 182 183 /* MAC_IN_VECTOR (0x180) register bit fields */ 184 #define EMAC_DM644X_MAC_IN_VECTOR_HOST_INT BIT(17) 185 #define EMAC_DM644X_MAC_IN_VECTOR_STATPEND_INT BIT(16) 186 #define EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC BIT(8) 187 #define EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC BIT(0) 188 189 /** NOTE:: For DM646x the IN_VECTOR has changed */ 190 #define EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC BIT(EMAC_DEF_RX_CH) 191 #define EMAC_DM646X_MAC_IN_VECTOR_TX_INT_VEC BIT(16 + EMAC_DEF_TX_CH) 192 #define EMAC_DM646X_MAC_IN_VECTOR_HOST_INT BIT(26) 193 #define EMAC_DM646X_MAC_IN_VECTOR_STATPEND_INT BIT(27) 194 195 /* CPPI bit positions */ 196 #define EMAC_CPPI_SOP_BIT BIT(31) 197 #define EMAC_CPPI_EOP_BIT BIT(30) 198 #define EMAC_CPPI_OWNERSHIP_BIT BIT(29) 199 #define EMAC_CPPI_EOQ_BIT BIT(28) 200 #define EMAC_CPPI_TEARDOWN_COMPLETE_BIT BIT(27) 201 #define EMAC_CPPI_PASS_CRC_BIT BIT(26) 202 #define EMAC_RX_BD_BUF_SIZE (0xFFFF) 203 #define EMAC_BD_LENGTH_FOR_CACHE (16) /* only CPPI bytes */ 204 #define EMAC_RX_BD_PKT_LENGTH_MASK (0xFFFF) 205 206 /* Max hardware defines */ 207 #define EMAC_MAX_TXRX_CHANNELS (8) /* Max hardware channels */ 208 #define EMAC_DEF_MAX_MULTICAST_ADDRESSES (64) /* Max mcast addr's */ 209 210 /* EMAC Peripheral Device Register Memory Layout structure */ 211 #define EMAC_MACINVECTOR 0x90 212 213 #define EMAC_DM646X_MACEOIVECTOR 0x94 214 215 #define EMAC_MACINTSTATRAW 0xB0 216 #define EMAC_MACINTSTATMASKED 0xB4 217 #define EMAC_MACINTMASKSET 0xB8 218 #define EMAC_MACINTMASKCLEAR 0xBC 219 220 #define EMAC_RXMBPENABLE 0x100 221 #define EMAC_RXUNICASTSET 0x104 222 #define EMAC_RXUNICASTCLEAR 0x108 223 #define EMAC_RXMAXLEN 0x10C 224 #define EMAC_RXBUFFEROFFSET 0x110 225 #define EMAC_RXFILTERLOWTHRESH 0x114 226 227 #define EMAC_MACCONTROL 0x160 228 #define EMAC_MACSTATUS 0x164 229 #define EMAC_EMCONTROL 0x168 230 #define EMAC_FIFOCONTROL 0x16C 231 #define EMAC_MACCONFIG 0x170 232 #define EMAC_SOFTRESET 0x174 233 #define EMAC_MACSRCADDRLO 0x1D0 234 #define EMAC_MACSRCADDRHI 0x1D4 235 #define EMAC_MACHASH1 0x1D8 236 #define EMAC_MACHASH2 0x1DC 237 #define EMAC_MACADDRLO 0x500 238 #define EMAC_MACADDRHI 0x504 239 #define EMAC_MACINDEX 0x508 240 241 /* EMAC statistics registers */ 242 #define EMAC_RXGOODFRAMES 0x200 243 #define EMAC_RXBCASTFRAMES 0x204 244 #define EMAC_RXMCASTFRAMES 0x208 245 #define EMAC_RXPAUSEFRAMES 0x20C 246 #define EMAC_RXCRCERRORS 0x210 247 #define EMAC_RXALIGNCODEERRORS 0x214 248 #define EMAC_RXOVERSIZED 0x218 249 #define EMAC_RXJABBER 0x21C 250 #define EMAC_RXUNDERSIZED 0x220 251 #define EMAC_RXFRAGMENTS 0x224 252 #define EMAC_RXFILTERED 0x228 253 #define EMAC_RXQOSFILTERED 0x22C 254 #define EMAC_RXOCTETS 0x230 255 #define EMAC_TXGOODFRAMES 0x234 256 #define EMAC_TXBCASTFRAMES 0x238 257 #define EMAC_TXMCASTFRAMES 0x23C 258 #define EMAC_TXPAUSEFRAMES 0x240 259 #define EMAC_TXDEFERRED 0x244 260 #define EMAC_TXCOLLISION 0x248 261 #define EMAC_TXSINGLECOLL 0x24C 262 #define EMAC_TXMULTICOLL 0x250 263 #define EMAC_TXEXCESSIVECOLL 0x254 264 #define EMAC_TXLATECOLL 0x258 265 #define EMAC_TXUNDERRUN 0x25C 266 #define EMAC_TXCARRIERSENSE 0x260 267 #define EMAC_TXOCTETS 0x264 268 #define EMAC_NETOCTETS 0x280 269 #define EMAC_RXSOFOVERRUNS 0x284 270 #define EMAC_RXMOFOVERRUNS 0x288 271 #define EMAC_RXDMAOVERRUNS 0x28C 272 273 /* EMAC DM644x control registers */ 274 #define EMAC_CTRL_EWCTL (0x4) 275 #define EMAC_CTRL_EWINTTCNT (0x8) 276 277 /* EMAC DM644x control module masks */ 278 #define EMAC_DM644X_EWINTCNT_MASK 0x1FFFF 279 #define EMAC_DM644X_INTMIN_INTVL 0x1 280 #define EMAC_DM644X_INTMAX_INTVL (EMAC_DM644X_EWINTCNT_MASK) 281 282 /* EMAC DM646X control module registers */ 283 #define EMAC_DM646X_CMINTCTRL 0x0C 284 #define EMAC_DM646X_CMRXINTEN 0x14 285 #define EMAC_DM646X_CMTXINTEN 0x18 286 #define EMAC_DM646X_CMRXINTMAX 0x70 287 #define EMAC_DM646X_CMTXINTMAX 0x74 288 289 /* EMAC DM646X control module masks */ 290 #define EMAC_DM646X_INTPACEEN (0x3 << 16) 291 #define EMAC_DM646X_INTPRESCALE_MASK (0x7FF << 0) 292 #define EMAC_DM646X_CMINTMAX_CNT 63 293 #define EMAC_DM646X_CMINTMIN_CNT 2 294 #define EMAC_DM646X_CMINTMAX_INTVL (1000 / EMAC_DM646X_CMINTMIN_CNT) 295 #define EMAC_DM646X_CMINTMIN_INTVL ((1000 / EMAC_DM646X_CMINTMAX_CNT) + 1) 296 297 298 /* EMAC EOI codes for C0 */ 299 #define EMAC_DM646X_MAC_EOI_C0_RXEN (0x01) 300 #define EMAC_DM646X_MAC_EOI_C0_TXEN (0x02) 301 302 /* EMAC Stats Clear Mask */ 303 #define EMAC_STATS_CLR_MASK (0xFFFFFFFF) 304 305 /* emac_priv: EMAC private data structure 306 * 307 * EMAC adapter private data structure 308 */ 309 struct emac_priv { 310 u32 msg_enable; 311 struct net_device *ndev; 312 struct platform_device *pdev; 313 struct napi_struct napi; 314 char mac_addr[6]; 315 void __iomem *remap_addr; 316 u32 emac_base_phys; 317 void __iomem *emac_base; 318 void __iomem *ctrl_base; 319 struct cpdma_ctlr *dma; 320 struct cpdma_chan *txchan; 321 struct cpdma_chan *rxchan; 322 u32 link; /* 1=link on, 0=link off */ 323 u32 speed; /* 0=Auto Neg, 1=No PHY, 10,100, 1000 - mbps */ 324 u32 duplex; /* Link duplex: 0=Half, 1=Full */ 325 u32 rx_buf_size; 326 u32 isr_count; 327 u32 coal_intvl; 328 u32 bus_freq_mhz; 329 u8 rmii_en; 330 u8 version; 331 u32 mac_hash1; 332 u32 mac_hash2; 333 u32 multicast_hash_cnt[EMAC_NUM_MULTICAST_BITS]; 334 u32 rx_addr_type; 335 const char *phy_id; 336 struct device_node *phy_node; 337 spinlock_t lock; 338 /*platform specific members*/ 339 void (*int_enable) (void); 340 void (*int_disable) (void); 341 }; 342 343 /* EMAC TX Host Error description strings */ 344 static char *emac_txhost_errcodes[16] = { 345 "No error", "SOP error", "Ownership bit not set in SOP buffer", 346 "Zero Next Buffer Descriptor Pointer Without EOP", 347 "Zero Buffer Pointer", "Zero Buffer Length", "Packet Length Error", 348 "Reserved", "Reserved", "Reserved", "Reserved", "Reserved", 349 "Reserved", "Reserved", "Reserved", "Reserved" 350 }; 351 352 /* EMAC RX Host Error description strings */ 353 static char *emac_rxhost_errcodes[16] = { 354 "No error", "Reserved", "Ownership bit not set in input buffer", 355 "Reserved", "Zero Buffer Pointer", "Reserved", "Reserved", 356 "Reserved", "Reserved", "Reserved", "Reserved", "Reserved", 357 "Reserved", "Reserved", "Reserved", "Reserved" 358 }; 359 360 /* Helper macros */ 361 #define emac_read(reg) ioread32(priv->emac_base + (reg)) 362 #define emac_write(reg, val) iowrite32(val, priv->emac_base + (reg)) 363 364 #define emac_ctrl_read(reg) ioread32((priv->ctrl_base + (reg))) 365 #define emac_ctrl_write(reg, val) iowrite32(val, (priv->ctrl_base + (reg))) 366 367 /** 368 * emac_get_drvinfo - Get EMAC driver information 369 * @ndev: The DaVinci EMAC network adapter 370 * @info: ethtool info structure containing name and version 371 * 372 * Returns EMAC driver information (name and version) 373 * 374 */ 375 static void emac_get_drvinfo(struct net_device *ndev, 376 struct ethtool_drvinfo *info) 377 { 378 strlcpy(info->driver, emac_version_string, sizeof(info->driver)); 379 strlcpy(info->version, EMAC_MODULE_VERSION, sizeof(info->version)); 380 } 381 382 /** 383 * emac_get_coalesce - Get interrupt coalesce settings for this device 384 * @ndev : The DaVinci EMAC network adapter 385 * @coal : ethtool coalesce settings structure 386 * 387 * Fetch the current interrupt coalesce settings 388 * 389 */ 390 static int emac_get_coalesce(struct net_device *ndev, 391 struct ethtool_coalesce *coal) 392 { 393 struct emac_priv *priv = netdev_priv(ndev); 394 395 coal->rx_coalesce_usecs = priv->coal_intvl; 396 return 0; 397 398 } 399 400 /** 401 * emac_set_coalesce - Set interrupt coalesce settings for this device 402 * @ndev : The DaVinci EMAC network adapter 403 * @coal : ethtool coalesce settings structure 404 * 405 * Set interrupt coalesce parameters 406 * 407 */ 408 static int emac_set_coalesce(struct net_device *ndev, 409 struct ethtool_coalesce *coal) 410 { 411 struct emac_priv *priv = netdev_priv(ndev); 412 u32 int_ctrl, num_interrupts = 0; 413 u32 prescale = 0, addnl_dvdr = 1, coal_intvl = 0; 414 415 if (!coal->rx_coalesce_usecs) 416 return -EINVAL; 417 418 coal_intvl = coal->rx_coalesce_usecs; 419 420 switch (priv->version) { 421 case EMAC_VERSION_2: 422 int_ctrl = emac_ctrl_read(EMAC_DM646X_CMINTCTRL); 423 prescale = priv->bus_freq_mhz * 4; 424 425 if (coal_intvl < EMAC_DM646X_CMINTMIN_INTVL) 426 coal_intvl = EMAC_DM646X_CMINTMIN_INTVL; 427 428 if (coal_intvl > EMAC_DM646X_CMINTMAX_INTVL) { 429 /* 430 * Interrupt pacer works with 4us Pulse, we can 431 * throttle further by dilating the 4us pulse. 432 */ 433 addnl_dvdr = EMAC_DM646X_INTPRESCALE_MASK / prescale; 434 435 if (addnl_dvdr > 1) { 436 prescale *= addnl_dvdr; 437 if (coal_intvl > (EMAC_DM646X_CMINTMAX_INTVL 438 * addnl_dvdr)) 439 coal_intvl = (EMAC_DM646X_CMINTMAX_INTVL 440 * addnl_dvdr); 441 } else { 442 addnl_dvdr = 1; 443 coal_intvl = EMAC_DM646X_CMINTMAX_INTVL; 444 } 445 } 446 447 num_interrupts = (1000 * addnl_dvdr) / coal_intvl; 448 449 int_ctrl |= EMAC_DM646X_INTPACEEN; 450 int_ctrl &= (~EMAC_DM646X_INTPRESCALE_MASK); 451 int_ctrl |= (prescale & EMAC_DM646X_INTPRESCALE_MASK); 452 emac_ctrl_write(EMAC_DM646X_CMINTCTRL, int_ctrl); 453 454 emac_ctrl_write(EMAC_DM646X_CMRXINTMAX, num_interrupts); 455 emac_ctrl_write(EMAC_DM646X_CMTXINTMAX, num_interrupts); 456 457 break; 458 default: 459 int_ctrl = emac_ctrl_read(EMAC_CTRL_EWINTTCNT); 460 int_ctrl &= (~EMAC_DM644X_EWINTCNT_MASK); 461 prescale = coal_intvl * priv->bus_freq_mhz; 462 if (prescale > EMAC_DM644X_EWINTCNT_MASK) { 463 prescale = EMAC_DM644X_EWINTCNT_MASK; 464 coal_intvl = prescale / priv->bus_freq_mhz; 465 } 466 emac_ctrl_write(EMAC_CTRL_EWINTTCNT, (int_ctrl | prescale)); 467 468 break; 469 } 470 471 printk(KERN_INFO"Set coalesce to %d usecs.\n", coal_intvl); 472 priv->coal_intvl = coal_intvl; 473 474 return 0; 475 476 } 477 478 479 /* ethtool_ops: DaVinci EMAC Ethtool structure 480 * 481 * Ethtool support for EMAC adapter 482 */ 483 static const struct ethtool_ops ethtool_ops = { 484 .get_drvinfo = emac_get_drvinfo, 485 .get_link = ethtool_op_get_link, 486 .get_coalesce = emac_get_coalesce, 487 .set_coalesce = emac_set_coalesce, 488 .get_ts_info = ethtool_op_get_ts_info, 489 .get_link_ksettings = phy_ethtool_get_link_ksettings, 490 .set_link_ksettings = phy_ethtool_set_link_ksettings, 491 }; 492 493 /** 494 * emac_update_phystatus - Update Phy status 495 * @priv: The DaVinci EMAC private adapter structure 496 * 497 * Updates phy status and takes action for network queue if required 498 * based upon link status 499 * 500 */ 501 static void emac_update_phystatus(struct emac_priv *priv) 502 { 503 u32 mac_control; 504 u32 new_duplex; 505 u32 cur_duplex; 506 struct net_device *ndev = priv->ndev; 507 508 mac_control = emac_read(EMAC_MACCONTROL); 509 cur_duplex = (mac_control & EMAC_MACCONTROL_FULLDUPLEXEN) ? 510 DUPLEX_FULL : DUPLEX_HALF; 511 if (ndev->phydev) 512 new_duplex = ndev->phydev->duplex; 513 else 514 new_duplex = DUPLEX_FULL; 515 516 /* We get called only if link has changed (speed/duplex/status) */ 517 if ((priv->link) && (new_duplex != cur_duplex)) { 518 priv->duplex = new_duplex; 519 if (DUPLEX_FULL == priv->duplex) 520 mac_control |= (EMAC_MACCONTROL_FULLDUPLEXEN); 521 else 522 mac_control &= ~(EMAC_MACCONTROL_FULLDUPLEXEN); 523 } 524 525 if (priv->speed == SPEED_1000 && (priv->version == EMAC_VERSION_2)) { 526 mac_control = emac_read(EMAC_MACCONTROL); 527 mac_control |= (EMAC_DM646X_MACCONTORL_GIG | 528 EMAC_DM646X_MACCONTORL_GIGFORCE); 529 } else { 530 /* Clear the GIG bit and GIGFORCE bit */ 531 mac_control &= ~(EMAC_DM646X_MACCONTORL_GIGFORCE | 532 EMAC_DM646X_MACCONTORL_GIG); 533 534 if (priv->rmii_en && (priv->speed == SPEED_100)) 535 mac_control |= EMAC_MACCONTROL_RMIISPEED_MASK; 536 else 537 mac_control &= ~EMAC_MACCONTROL_RMIISPEED_MASK; 538 } 539 540 /* Update mac_control if changed */ 541 emac_write(EMAC_MACCONTROL, mac_control); 542 543 if (priv->link) { 544 /* link ON */ 545 if (!netif_carrier_ok(ndev)) 546 netif_carrier_on(ndev); 547 /* reactivate the transmit queue if it is stopped */ 548 if (netif_running(ndev) && netif_queue_stopped(ndev)) 549 netif_wake_queue(ndev); 550 } else { 551 /* link OFF */ 552 if (netif_carrier_ok(ndev)) 553 netif_carrier_off(ndev); 554 if (!netif_queue_stopped(ndev)) 555 netif_stop_queue(ndev); 556 } 557 } 558 559 /** 560 * hash_get - Calculate hash value from mac address 561 * @addr: mac address to delete from hash table 562 * 563 * Calculates hash value from mac address 564 * 565 */ 566 static u32 hash_get(u8 *addr) 567 { 568 u32 hash; 569 u8 tmpval; 570 int cnt; 571 hash = 0; 572 573 for (cnt = 0; cnt < 2; cnt++) { 574 tmpval = *addr++; 575 hash ^= (tmpval >> 2) ^ (tmpval << 4); 576 tmpval = *addr++; 577 hash ^= (tmpval >> 4) ^ (tmpval << 2); 578 tmpval = *addr++; 579 hash ^= (tmpval >> 6) ^ (tmpval); 580 } 581 582 return hash & 0x3F; 583 } 584 585 /** 586 * emac_hash_add - Hash function to add mac addr from hash table 587 * @priv: The DaVinci EMAC private adapter structure 588 * @mac_addr: mac address to delete from hash table 589 * 590 * Adds mac address to the internal hash table 591 * 592 */ 593 static int emac_hash_add(struct emac_priv *priv, u8 *mac_addr) 594 { 595 struct device *emac_dev = &priv->ndev->dev; 596 u32 rc = 0; 597 u32 hash_bit; 598 u32 hash_value = hash_get(mac_addr); 599 600 if (hash_value >= EMAC_NUM_MULTICAST_BITS) { 601 if (netif_msg_drv(priv)) { 602 dev_err(emac_dev, "DaVinci EMAC: emac_hash_add(): Invalid "\ 603 "Hash %08x, should not be greater than %08x", 604 hash_value, (EMAC_NUM_MULTICAST_BITS - 1)); 605 } 606 return -1; 607 } 608 609 /* set the hash bit only if not previously set */ 610 if (priv->multicast_hash_cnt[hash_value] == 0) { 611 rc = 1; /* hash value changed */ 612 if (hash_value < 32) { 613 hash_bit = BIT(hash_value); 614 priv->mac_hash1 |= hash_bit; 615 } else { 616 hash_bit = BIT((hash_value - 32)); 617 priv->mac_hash2 |= hash_bit; 618 } 619 } 620 621 /* incr counter for num of mcast addr's mapped to "this" hash bit */ 622 ++priv->multicast_hash_cnt[hash_value]; 623 624 return rc; 625 } 626 627 /** 628 * emac_hash_del - Hash function to delete mac addr from hash table 629 * @priv: The DaVinci EMAC private adapter structure 630 * @mac_addr: mac address to delete from hash table 631 * 632 * Removes mac address from the internal hash table 633 * 634 */ 635 static int emac_hash_del(struct emac_priv *priv, u8 *mac_addr) 636 { 637 u32 hash_value; 638 u32 hash_bit; 639 640 hash_value = hash_get(mac_addr); 641 if (priv->multicast_hash_cnt[hash_value] > 0) { 642 /* dec cntr for num of mcast addr's mapped to this hash bit */ 643 --priv->multicast_hash_cnt[hash_value]; 644 } 645 646 /* if counter still > 0, at least one multicast address refers 647 * to this hash bit. so return 0 */ 648 if (priv->multicast_hash_cnt[hash_value] > 0) 649 return 0; 650 651 if (hash_value < 32) { 652 hash_bit = BIT(hash_value); 653 priv->mac_hash1 &= ~hash_bit; 654 } else { 655 hash_bit = BIT((hash_value - 32)); 656 priv->mac_hash2 &= ~hash_bit; 657 } 658 659 /* return 1 to indicate change in mac_hash registers reqd */ 660 return 1; 661 } 662 663 /* EMAC multicast operation */ 664 #define EMAC_MULTICAST_ADD 0 665 #define EMAC_MULTICAST_DEL 1 666 #define EMAC_ALL_MULTI_SET 2 667 #define EMAC_ALL_MULTI_CLR 3 668 669 /** 670 * emac_add_mcast - Set multicast address in the EMAC adapter (Internal) 671 * @priv: The DaVinci EMAC private adapter structure 672 * @action: multicast operation to perform 673 * mac_addr: mac address to set 674 * 675 * Set multicast addresses in EMAC adapter - internal function 676 * 677 */ 678 static void emac_add_mcast(struct emac_priv *priv, u32 action, u8 *mac_addr) 679 { 680 struct device *emac_dev = &priv->ndev->dev; 681 int update = -1; 682 683 switch (action) { 684 case EMAC_MULTICAST_ADD: 685 update = emac_hash_add(priv, mac_addr); 686 break; 687 case EMAC_MULTICAST_DEL: 688 update = emac_hash_del(priv, mac_addr); 689 break; 690 case EMAC_ALL_MULTI_SET: 691 update = 1; 692 priv->mac_hash1 = EMAC_ALL_MULTI_REG_VALUE; 693 priv->mac_hash2 = EMAC_ALL_MULTI_REG_VALUE; 694 break; 695 case EMAC_ALL_MULTI_CLR: 696 update = 1; 697 priv->mac_hash1 = 0; 698 priv->mac_hash2 = 0; 699 memset(&(priv->multicast_hash_cnt[0]), 0, 700 sizeof(priv->multicast_hash_cnt[0]) * 701 EMAC_NUM_MULTICAST_BITS); 702 break; 703 default: 704 if (netif_msg_drv(priv)) 705 dev_err(emac_dev, "DaVinci EMAC: add_mcast"\ 706 ": bad operation %d", action); 707 break; 708 } 709 710 /* write to the hardware only if the register status chances */ 711 if (update > 0) { 712 emac_write(EMAC_MACHASH1, priv->mac_hash1); 713 emac_write(EMAC_MACHASH2, priv->mac_hash2); 714 } 715 } 716 717 /** 718 * emac_dev_mcast_set - Set multicast address in the EMAC adapter 719 * @ndev: The DaVinci EMAC network adapter 720 * 721 * Set multicast addresses in EMAC adapter 722 * 723 */ 724 static void emac_dev_mcast_set(struct net_device *ndev) 725 { 726 u32 mbp_enable; 727 struct emac_priv *priv = netdev_priv(ndev); 728 729 mbp_enable = emac_read(EMAC_RXMBPENABLE); 730 if (ndev->flags & IFF_PROMISC) { 731 mbp_enable &= (~EMAC_MBP_PROMISCCH(EMAC_DEF_PROM_CH)); 732 mbp_enable |= (EMAC_MBP_RXPROMISC); 733 } else { 734 mbp_enable = (mbp_enable & ~EMAC_MBP_RXPROMISC); 735 if ((ndev->flags & IFF_ALLMULTI) || 736 netdev_mc_count(ndev) > EMAC_DEF_MAX_MULTICAST_ADDRESSES) { 737 mbp_enable = (mbp_enable | EMAC_MBP_RXMCAST); 738 emac_add_mcast(priv, EMAC_ALL_MULTI_SET, NULL); 739 } else if (!netdev_mc_empty(ndev)) { 740 struct netdev_hw_addr *ha; 741 742 mbp_enable = (mbp_enable | EMAC_MBP_RXMCAST); 743 emac_add_mcast(priv, EMAC_ALL_MULTI_CLR, NULL); 744 /* program multicast address list into EMAC hardware */ 745 netdev_for_each_mc_addr(ha, ndev) { 746 emac_add_mcast(priv, EMAC_MULTICAST_ADD, 747 (u8 *) ha->addr); 748 } 749 } else { 750 mbp_enable = (mbp_enable & ~EMAC_MBP_RXMCAST); 751 emac_add_mcast(priv, EMAC_ALL_MULTI_CLR, NULL); 752 } 753 } 754 /* Set mbp config register */ 755 emac_write(EMAC_RXMBPENABLE, mbp_enable); 756 } 757 758 /************************************************************************* 759 * EMAC Hardware manipulation 760 *************************************************************************/ 761 762 /** 763 * emac_int_disable - Disable EMAC module interrupt (from adapter) 764 * @priv: The DaVinci EMAC private adapter structure 765 * 766 * Disable EMAC interrupt on the adapter 767 * 768 */ 769 static void emac_int_disable(struct emac_priv *priv) 770 { 771 if (priv->version == EMAC_VERSION_2) { 772 unsigned long flags; 773 774 local_irq_save(flags); 775 776 /* Program C0_Int_En to zero to turn off 777 * interrupts to the CPU */ 778 emac_ctrl_write(EMAC_DM646X_CMRXINTEN, 0x0); 779 emac_ctrl_write(EMAC_DM646X_CMTXINTEN, 0x0); 780 /* NOTE: Rx Threshold and Misc interrupts are not disabled */ 781 if (priv->int_disable) 782 priv->int_disable(); 783 784 /* NOTE: Rx Threshold and Misc interrupts are not enabled */ 785 786 /* ack rxen only then a new pulse will be generated */ 787 emac_write(EMAC_DM646X_MACEOIVECTOR, 788 EMAC_DM646X_MAC_EOI_C0_RXEN); 789 790 /* ack txen- only then a new pulse will be generated */ 791 emac_write(EMAC_DM646X_MACEOIVECTOR, 792 EMAC_DM646X_MAC_EOI_C0_TXEN); 793 794 local_irq_restore(flags); 795 796 } else { 797 /* Set DM644x control registers for interrupt control */ 798 emac_ctrl_write(EMAC_CTRL_EWCTL, 0x0); 799 } 800 } 801 802 /** 803 * emac_int_enable - Enable EMAC module interrupt (from adapter) 804 * @priv: The DaVinci EMAC private adapter structure 805 * 806 * Enable EMAC interrupt on the adapter 807 * 808 */ 809 static void emac_int_enable(struct emac_priv *priv) 810 { 811 if (priv->version == EMAC_VERSION_2) { 812 if (priv->int_enable) 813 priv->int_enable(); 814 815 emac_ctrl_write(EMAC_DM646X_CMRXINTEN, 0xff); 816 emac_ctrl_write(EMAC_DM646X_CMTXINTEN, 0xff); 817 818 /* In addition to turning on interrupt Enable, we need 819 * ack by writing appropriate values to the EOI 820 * register */ 821 822 /* NOTE: Rx Threshold and Misc interrupts are not enabled */ 823 } else { 824 /* Set DM644x control registers for interrupt control */ 825 emac_ctrl_write(EMAC_CTRL_EWCTL, 0x1); 826 } 827 } 828 829 /** 830 * emac_irq - EMAC interrupt handler 831 * @irq: interrupt number 832 * @dev_id: EMAC network adapter data structure ptr 833 * 834 * EMAC Interrupt handler - we only schedule NAPI and not process any packets 835 * here. EVen the interrupt status is checked (TX/RX/Err) in NAPI poll function 836 * 837 * Returns interrupt handled condition 838 */ 839 static irqreturn_t emac_irq(int irq, void *dev_id) 840 { 841 struct net_device *ndev = (struct net_device *)dev_id; 842 struct emac_priv *priv = netdev_priv(ndev); 843 844 ++priv->isr_count; 845 if (likely(netif_running(priv->ndev))) { 846 emac_int_disable(priv); 847 napi_schedule(&priv->napi); 848 } else { 849 /* we are closing down, so dont process anything */ 850 } 851 return IRQ_HANDLED; 852 } 853 854 static struct sk_buff *emac_rx_alloc(struct emac_priv *priv) 855 { 856 struct sk_buff *skb = netdev_alloc_skb(priv->ndev, priv->rx_buf_size); 857 if (WARN_ON(!skb)) 858 return NULL; 859 skb_reserve(skb, NET_IP_ALIGN); 860 return skb; 861 } 862 863 static void emac_rx_handler(void *token, int len, int status) 864 { 865 struct sk_buff *skb = token; 866 struct net_device *ndev = skb->dev; 867 struct emac_priv *priv = netdev_priv(ndev); 868 struct device *emac_dev = &ndev->dev; 869 int ret; 870 871 /* free and bail if we are shutting down */ 872 if (unlikely(!netif_running(ndev))) { 873 dev_kfree_skb_any(skb); 874 return; 875 } 876 877 /* recycle on receive error */ 878 if (status < 0) { 879 ndev->stats.rx_errors++; 880 goto recycle; 881 } 882 883 /* feed received packet up the stack */ 884 skb_put(skb, len); 885 skb->protocol = eth_type_trans(skb, ndev); 886 netif_receive_skb(skb); 887 ndev->stats.rx_bytes += len; 888 ndev->stats.rx_packets++; 889 890 /* alloc a new packet for receive */ 891 skb = emac_rx_alloc(priv); 892 if (!skb) { 893 if (netif_msg_rx_err(priv) && net_ratelimit()) 894 dev_err(emac_dev, "failed rx buffer alloc\n"); 895 return; 896 } 897 898 recycle: 899 ret = cpdma_chan_submit(priv->rxchan, skb, skb->data, 900 skb_tailroom(skb), 0); 901 902 WARN_ON(ret == -ENOMEM); 903 if (unlikely(ret < 0)) 904 dev_kfree_skb_any(skb); 905 } 906 907 static void emac_tx_handler(void *token, int len, int status) 908 { 909 struct sk_buff *skb = token; 910 struct net_device *ndev = skb->dev; 911 912 /* Check whether the queue is stopped due to stalled tx dma, if the 913 * queue is stopped then start the queue as we have free desc for tx 914 */ 915 if (unlikely(netif_queue_stopped(ndev))) 916 netif_wake_queue(ndev); 917 ndev->stats.tx_packets++; 918 ndev->stats.tx_bytes += len; 919 dev_kfree_skb_any(skb); 920 } 921 922 /** 923 * emac_dev_xmit - EMAC Transmit function 924 * @skb: SKB pointer 925 * @ndev: The DaVinci EMAC network adapter 926 * 927 * Called by the system to transmit a packet - we queue the packet in 928 * EMAC hardware transmit queue 929 * 930 * Returns success(NETDEV_TX_OK) or error code (typically out of desc's) 931 */ 932 static int emac_dev_xmit(struct sk_buff *skb, struct net_device *ndev) 933 { 934 struct device *emac_dev = &ndev->dev; 935 int ret_code; 936 struct emac_priv *priv = netdev_priv(ndev); 937 938 /* If no link, return */ 939 if (unlikely(!priv->link)) { 940 if (netif_msg_tx_err(priv) && net_ratelimit()) 941 dev_err(emac_dev, "DaVinci EMAC: No link to transmit"); 942 goto fail_tx; 943 } 944 945 ret_code = skb_padto(skb, EMAC_DEF_MIN_ETHPKTSIZE); 946 if (unlikely(ret_code < 0)) { 947 if (netif_msg_tx_err(priv) && net_ratelimit()) 948 dev_err(emac_dev, "DaVinci EMAC: packet pad failed"); 949 goto fail_tx; 950 } 951 952 skb_tx_timestamp(skb); 953 954 ret_code = cpdma_chan_submit(priv->txchan, skb, skb->data, skb->len, 955 0); 956 if (unlikely(ret_code != 0)) { 957 if (netif_msg_tx_err(priv) && net_ratelimit()) 958 dev_err(emac_dev, "DaVinci EMAC: desc submit failed"); 959 goto fail_tx; 960 } 961 962 /* If there is no more tx desc left free then we need to 963 * tell the kernel to stop sending us tx frames. 964 */ 965 if (unlikely(!cpdma_check_free_tx_desc(priv->txchan))) 966 netif_stop_queue(ndev); 967 968 return NETDEV_TX_OK; 969 970 fail_tx: 971 ndev->stats.tx_dropped++; 972 netif_stop_queue(ndev); 973 return NETDEV_TX_BUSY; 974 } 975 976 /** 977 * emac_dev_tx_timeout - EMAC Transmit timeout function 978 * @ndev: The DaVinci EMAC network adapter 979 * 980 * Called when system detects that a skb timeout period has expired 981 * potentially due to a fault in the adapter in not being able to send 982 * it out on the wire. We teardown the TX channel assuming a hardware 983 * error and re-initialize the TX channel for hardware operation 984 * 985 */ 986 static void emac_dev_tx_timeout(struct net_device *ndev, unsigned int txqueue) 987 { 988 struct emac_priv *priv = netdev_priv(ndev); 989 struct device *emac_dev = &ndev->dev; 990 991 if (netif_msg_tx_err(priv)) 992 dev_err(emac_dev, "DaVinci EMAC: xmit timeout, restarting TX"); 993 994 ndev->stats.tx_errors++; 995 emac_int_disable(priv); 996 cpdma_chan_stop(priv->txchan); 997 cpdma_chan_start(priv->txchan); 998 emac_int_enable(priv); 999 } 1000 1001 /** 1002 * emac_set_type0addr - Set EMAC Type0 mac address 1003 * @priv: The DaVinci EMAC private adapter structure 1004 * @ch: RX channel number 1005 * @mac_addr: MAC address to set in device 1006 * 1007 * Called internally to set Type0 mac address of the adapter (Device) 1008 * 1009 * Returns success (0) or appropriate error code (none as of now) 1010 */ 1011 static void emac_set_type0addr(struct emac_priv *priv, u32 ch, char *mac_addr) 1012 { 1013 u32 val; 1014 val = ((mac_addr[5] << 8) | (mac_addr[4])); 1015 emac_write(EMAC_MACSRCADDRLO, val); 1016 1017 val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \ 1018 (mac_addr[1] << 8) | (mac_addr[0])); 1019 emac_write(EMAC_MACSRCADDRHI, val); 1020 val = emac_read(EMAC_RXUNICASTSET); 1021 val |= BIT(ch); 1022 emac_write(EMAC_RXUNICASTSET, val); 1023 val = emac_read(EMAC_RXUNICASTCLEAR); 1024 val &= ~BIT(ch); 1025 emac_write(EMAC_RXUNICASTCLEAR, val); 1026 } 1027 1028 /** 1029 * emac_set_type1addr - Set EMAC Type1 mac address 1030 * @priv: The DaVinci EMAC private adapter structure 1031 * @ch: RX channel number 1032 * @mac_addr: MAC address to set in device 1033 * 1034 * Called internally to set Type1 mac address of the adapter (Device) 1035 * 1036 * Returns success (0) or appropriate error code (none as of now) 1037 */ 1038 static void emac_set_type1addr(struct emac_priv *priv, u32 ch, char *mac_addr) 1039 { 1040 u32 val; 1041 emac_write(EMAC_MACINDEX, ch); 1042 val = ((mac_addr[5] << 8) | mac_addr[4]); 1043 emac_write(EMAC_MACADDRLO, val); 1044 val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \ 1045 (mac_addr[1] << 8) | (mac_addr[0])); 1046 emac_write(EMAC_MACADDRHI, val); 1047 emac_set_type0addr(priv, ch, mac_addr); 1048 } 1049 1050 /** 1051 * emac_set_type2addr - Set EMAC Type2 mac address 1052 * @priv: The DaVinci EMAC private adapter structure 1053 * @ch: RX channel number 1054 * @mac_addr: MAC address to set in device 1055 * @index: index into RX address entries 1056 * @match: match parameter for RX address matching logic 1057 * 1058 * Called internally to set Type2 mac address of the adapter (Device) 1059 * 1060 * Returns success (0) or appropriate error code (none as of now) 1061 */ 1062 static void emac_set_type2addr(struct emac_priv *priv, u32 ch, 1063 char *mac_addr, int index, int match) 1064 { 1065 u32 val; 1066 emac_write(EMAC_MACINDEX, index); 1067 val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \ 1068 (mac_addr[1] << 8) | (mac_addr[0])); 1069 emac_write(EMAC_MACADDRHI, val); 1070 val = ((mac_addr[5] << 8) | mac_addr[4] | ((ch & 0x7) << 16) | \ 1071 (match << 19) | BIT(20)); 1072 emac_write(EMAC_MACADDRLO, val); 1073 emac_set_type0addr(priv, ch, mac_addr); 1074 } 1075 1076 /** 1077 * emac_setmac - Set mac address in the adapter (internal function) 1078 * @priv: The DaVinci EMAC private adapter structure 1079 * @ch: RX channel number 1080 * @mac_addr: MAC address to set in device 1081 * 1082 * Called internally to set the mac address of the adapter (Device) 1083 * 1084 * Returns success (0) or appropriate error code (none as of now) 1085 */ 1086 static void emac_setmac(struct emac_priv *priv, u32 ch, char *mac_addr) 1087 { 1088 struct device *emac_dev = &priv->ndev->dev; 1089 1090 if (priv->rx_addr_type == 0) { 1091 emac_set_type0addr(priv, ch, mac_addr); 1092 } else if (priv->rx_addr_type == 1) { 1093 u32 cnt; 1094 for (cnt = 0; cnt < EMAC_MAX_TXRX_CHANNELS; cnt++) 1095 emac_set_type1addr(priv, ch, mac_addr); 1096 } else if (priv->rx_addr_type == 2) { 1097 emac_set_type2addr(priv, ch, mac_addr, ch, 1); 1098 emac_set_type0addr(priv, ch, mac_addr); 1099 } else { 1100 if (netif_msg_drv(priv)) 1101 dev_err(emac_dev, "DaVinci EMAC: Wrong addressing\n"); 1102 } 1103 } 1104 1105 /** 1106 * emac_dev_setmac_addr - Set mac address in the adapter 1107 * @ndev: The DaVinci EMAC network adapter 1108 * @addr: MAC address to set in device 1109 * 1110 * Called by the system to set the mac address of the adapter (Device) 1111 * 1112 * Returns success (0) or appropriate error code (none as of now) 1113 */ 1114 static int emac_dev_setmac_addr(struct net_device *ndev, void *addr) 1115 { 1116 struct emac_priv *priv = netdev_priv(ndev); 1117 struct device *emac_dev = &priv->ndev->dev; 1118 struct sockaddr *sa = addr; 1119 1120 if (!is_valid_ether_addr(sa->sa_data)) 1121 return -EADDRNOTAVAIL; 1122 1123 /* Store mac addr in priv and rx channel and set it in EMAC hw */ 1124 memcpy(priv->mac_addr, sa->sa_data, ndev->addr_len); 1125 memcpy(ndev->dev_addr, sa->sa_data, ndev->addr_len); 1126 1127 /* MAC address is configured only after the interface is enabled. */ 1128 if (netif_running(ndev)) { 1129 emac_setmac(priv, EMAC_DEF_RX_CH, priv->mac_addr); 1130 } 1131 1132 if (netif_msg_drv(priv)) 1133 dev_notice(emac_dev, "DaVinci EMAC: emac_dev_setmac_addr %pM\n", 1134 priv->mac_addr); 1135 1136 return 0; 1137 } 1138 1139 /** 1140 * emac_hw_enable - Enable EMAC hardware for packet transmission/reception 1141 * @priv: The DaVinci EMAC private adapter structure 1142 * 1143 * Enables EMAC hardware for packet processing - enables PHY, enables RX 1144 * for packet reception and enables device interrupts and then NAPI 1145 * 1146 * Returns success (0) or appropriate error code (none right now) 1147 */ 1148 static int emac_hw_enable(struct emac_priv *priv) 1149 { 1150 u32 val, mbp_enable, mac_control; 1151 1152 /* Soft reset */ 1153 emac_write(EMAC_SOFTRESET, 1); 1154 while (emac_read(EMAC_SOFTRESET)) 1155 cpu_relax(); 1156 1157 /* Disable interrupt & Set pacing for more interrupts initially */ 1158 emac_int_disable(priv); 1159 1160 /* Full duplex enable bit set when auto negotiation happens */ 1161 mac_control = 1162 (((EMAC_DEF_TXPRIO_FIXED) ? (EMAC_MACCONTROL_TXPTYPE) : 0x0) | 1163 ((priv->speed == 1000) ? EMAC_MACCONTROL_GIGABITEN : 0x0) | 1164 ((EMAC_DEF_TXPACING_EN) ? (EMAC_MACCONTROL_TXPACEEN) : 0x0) | 1165 ((priv->duplex == DUPLEX_FULL) ? 0x1 : 0)); 1166 emac_write(EMAC_MACCONTROL, mac_control); 1167 1168 mbp_enable = 1169 (((EMAC_DEF_PASS_CRC) ? (EMAC_RXMBP_PASSCRC_MASK) : 0x0) | 1170 ((EMAC_DEF_QOS_EN) ? (EMAC_RXMBP_QOSEN_MASK) : 0x0) | 1171 ((EMAC_DEF_NO_BUFF_CHAIN) ? (EMAC_RXMBP_NOCHAIN_MASK) : 0x0) | 1172 ((EMAC_DEF_MACCTRL_FRAME_EN) ? (EMAC_RXMBP_CMFEN_MASK) : 0x0) | 1173 ((EMAC_DEF_SHORT_FRAME_EN) ? (EMAC_RXMBP_CSFEN_MASK) : 0x0) | 1174 ((EMAC_DEF_ERROR_FRAME_EN) ? (EMAC_RXMBP_CEFEN_MASK) : 0x0) | 1175 ((EMAC_DEF_PROM_EN) ? (EMAC_RXMBP_CAFEN_MASK) : 0x0) | 1176 ((EMAC_DEF_PROM_CH & EMAC_RXMBP_CHMASK) << \ 1177 EMAC_RXMBP_PROMCH_SHIFT) | 1178 ((EMAC_DEF_BCAST_EN) ? (EMAC_RXMBP_BROADEN_MASK) : 0x0) | 1179 ((EMAC_DEF_BCAST_CH & EMAC_RXMBP_CHMASK) << \ 1180 EMAC_RXMBP_BROADCH_SHIFT) | 1181 ((EMAC_DEF_MCAST_EN) ? (EMAC_RXMBP_MULTIEN_MASK) : 0x0) | 1182 ((EMAC_DEF_MCAST_CH & EMAC_RXMBP_CHMASK) << \ 1183 EMAC_RXMBP_MULTICH_SHIFT)); 1184 emac_write(EMAC_RXMBPENABLE, mbp_enable); 1185 emac_write(EMAC_RXMAXLEN, (EMAC_DEF_MAX_FRAME_SIZE & 1186 EMAC_RX_MAX_LEN_MASK)); 1187 emac_write(EMAC_RXBUFFEROFFSET, (EMAC_DEF_BUFFER_OFFSET & 1188 EMAC_RX_BUFFER_OFFSET_MASK)); 1189 emac_write(EMAC_RXFILTERLOWTHRESH, 0); 1190 emac_write(EMAC_RXUNICASTCLEAR, EMAC_RX_UNICAST_CLEAR_ALL); 1191 priv->rx_addr_type = (emac_read(EMAC_MACCONFIG) >> 8) & 0xFF; 1192 1193 emac_write(EMAC_MACINTMASKSET, EMAC_MAC_HOST_ERR_INTMASK_VAL); 1194 1195 emac_setmac(priv, EMAC_DEF_RX_CH, priv->mac_addr); 1196 1197 /* Enable MII */ 1198 val = emac_read(EMAC_MACCONTROL); 1199 val |= (EMAC_MACCONTROL_GMIIEN); 1200 emac_write(EMAC_MACCONTROL, val); 1201 1202 /* Enable NAPI and interrupts */ 1203 napi_enable(&priv->napi); 1204 emac_int_enable(priv); 1205 return 0; 1206 1207 } 1208 1209 /** 1210 * emac_poll - EMAC NAPI Poll function 1211 * @ndev: The DaVinci EMAC network adapter 1212 * @budget: Number of receive packets to process (as told by NAPI layer) 1213 * 1214 * NAPI Poll function implemented to process packets as per budget. We check 1215 * the type of interrupt on the device and accordingly call the TX or RX 1216 * packet processing functions. We follow the budget for RX processing and 1217 * also put a cap on number of TX pkts processed through config param. The 1218 * NAPI schedule function is called if more packets pending. 1219 * 1220 * Returns number of packets received (in most cases; else TX pkts - rarely) 1221 */ 1222 static int emac_poll(struct napi_struct *napi, int budget) 1223 { 1224 unsigned int mask; 1225 struct emac_priv *priv = container_of(napi, struct emac_priv, napi); 1226 struct net_device *ndev = priv->ndev; 1227 struct device *emac_dev = &ndev->dev; 1228 u32 status = 0; 1229 u32 num_tx_pkts = 0, num_rx_pkts = 0; 1230 1231 /* Check interrupt vectors and call packet processing */ 1232 status = emac_read(EMAC_MACINVECTOR); 1233 1234 mask = EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC; 1235 1236 if (priv->version == EMAC_VERSION_2) 1237 mask = EMAC_DM646X_MAC_IN_VECTOR_TX_INT_VEC; 1238 1239 if (status & mask) { 1240 num_tx_pkts = cpdma_chan_process(priv->txchan, 1241 EMAC_DEF_TX_MAX_SERVICE); 1242 } /* TX processing */ 1243 1244 mask = EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC; 1245 1246 if (priv->version == EMAC_VERSION_2) 1247 mask = EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC; 1248 1249 if (status & mask) { 1250 num_rx_pkts = cpdma_chan_process(priv->rxchan, budget); 1251 } /* RX processing */ 1252 1253 mask = EMAC_DM644X_MAC_IN_VECTOR_HOST_INT; 1254 if (priv->version == EMAC_VERSION_2) 1255 mask = EMAC_DM646X_MAC_IN_VECTOR_HOST_INT; 1256 1257 if (unlikely(status & mask)) { 1258 u32 ch, cause; 1259 dev_err(emac_dev, "DaVinci EMAC: Fatal Hardware Error\n"); 1260 netif_stop_queue(ndev); 1261 napi_disable(&priv->napi); 1262 1263 status = emac_read(EMAC_MACSTATUS); 1264 cause = ((status & EMAC_MACSTATUS_TXERRCODE_MASK) >> 1265 EMAC_MACSTATUS_TXERRCODE_SHIFT); 1266 if (cause) { 1267 ch = ((status & EMAC_MACSTATUS_TXERRCH_MASK) >> 1268 EMAC_MACSTATUS_TXERRCH_SHIFT); 1269 if (net_ratelimit()) { 1270 dev_err(emac_dev, "TX Host error %s on ch=%d\n", 1271 &emac_txhost_errcodes[cause][0], ch); 1272 } 1273 } 1274 cause = ((status & EMAC_MACSTATUS_RXERRCODE_MASK) >> 1275 EMAC_MACSTATUS_RXERRCODE_SHIFT); 1276 if (cause) { 1277 ch = ((status & EMAC_MACSTATUS_RXERRCH_MASK) >> 1278 EMAC_MACSTATUS_RXERRCH_SHIFT); 1279 if (netif_msg_hw(priv) && net_ratelimit()) 1280 dev_err(emac_dev, "RX Host error %s on ch=%d\n", 1281 &emac_rxhost_errcodes[cause][0], ch); 1282 } 1283 } else if (num_rx_pkts < budget) { 1284 napi_complete_done(napi, num_rx_pkts); 1285 emac_int_enable(priv); 1286 } 1287 1288 return num_rx_pkts; 1289 } 1290 1291 #ifdef CONFIG_NET_POLL_CONTROLLER 1292 /** 1293 * emac_poll_controller - EMAC Poll controller function 1294 * @ndev: The DaVinci EMAC network adapter 1295 * 1296 * Polled functionality used by netconsole and others in non interrupt mode 1297 * 1298 */ 1299 static void emac_poll_controller(struct net_device *ndev) 1300 { 1301 struct emac_priv *priv = netdev_priv(ndev); 1302 1303 emac_int_disable(priv); 1304 emac_irq(ndev->irq, ndev); 1305 emac_int_enable(priv); 1306 } 1307 #endif 1308 1309 static void emac_adjust_link(struct net_device *ndev) 1310 { 1311 struct emac_priv *priv = netdev_priv(ndev); 1312 struct phy_device *phydev = ndev->phydev; 1313 unsigned long flags; 1314 int new_state = 0; 1315 1316 spin_lock_irqsave(&priv->lock, flags); 1317 1318 if (phydev->link) { 1319 /* check the mode of operation - full/half duplex */ 1320 if (phydev->duplex != priv->duplex) { 1321 new_state = 1; 1322 priv->duplex = phydev->duplex; 1323 } 1324 if (phydev->speed != priv->speed) { 1325 new_state = 1; 1326 priv->speed = phydev->speed; 1327 } 1328 if (!priv->link) { 1329 new_state = 1; 1330 priv->link = 1; 1331 } 1332 1333 } else if (priv->link) { 1334 new_state = 1; 1335 priv->link = 0; 1336 priv->speed = 0; 1337 priv->duplex = ~0; 1338 } 1339 if (new_state) { 1340 emac_update_phystatus(priv); 1341 phy_print_status(ndev->phydev); 1342 } 1343 1344 spin_unlock_irqrestore(&priv->lock, flags); 1345 } 1346 1347 /************************************************************************* 1348 * Linux Driver Model 1349 *************************************************************************/ 1350 1351 /** 1352 * emac_devioctl - EMAC adapter ioctl 1353 * @ndev: The DaVinci EMAC network adapter 1354 * @ifrq: request parameter 1355 * @cmd: command parameter 1356 * 1357 * EMAC driver ioctl function 1358 * 1359 * Returns success(0) or appropriate error code 1360 */ 1361 static int emac_devioctl(struct net_device *ndev, struct ifreq *ifrq, int cmd) 1362 { 1363 if (!(netif_running(ndev))) 1364 return -EINVAL; 1365 1366 /* TODO: Add phy read and write and private statistics get feature */ 1367 1368 if (ndev->phydev) 1369 return phy_mii_ioctl(ndev->phydev, ifrq, cmd); 1370 else 1371 return -EOPNOTSUPP; 1372 } 1373 1374 static int match_first_device(struct device *dev, const void *data) 1375 { 1376 if (dev->parent && dev->parent->of_node) 1377 return of_device_is_compatible(dev->parent->of_node, 1378 "ti,davinci_mdio"); 1379 1380 return !strncmp(dev_name(dev), "davinci_mdio", 12); 1381 } 1382 1383 /** 1384 * emac_dev_open - EMAC device open 1385 * @ndev: The DaVinci EMAC network adapter 1386 * 1387 * Called when system wants to start the interface. We init TX/RX channels 1388 * and enable the hardware for packet reception/transmission and start the 1389 * network queue. 1390 * 1391 * Returns 0 for a successful open, or appropriate error code 1392 */ 1393 static int emac_dev_open(struct net_device *ndev) 1394 { 1395 struct device *emac_dev = &ndev->dev; 1396 u32 cnt; 1397 struct resource *res; 1398 int q, m, ret; 1399 int res_num = 0, irq_num = 0; 1400 int i = 0; 1401 struct emac_priv *priv = netdev_priv(ndev); 1402 struct phy_device *phydev = NULL; 1403 struct device *phy = NULL; 1404 1405 ret = pm_runtime_get_sync(&priv->pdev->dev); 1406 if (ret < 0) { 1407 pm_runtime_put_noidle(&priv->pdev->dev); 1408 dev_err(&priv->pdev->dev, "%s: failed to get_sync(%d)\n", 1409 __func__, ret); 1410 return ret; 1411 } 1412 1413 netif_carrier_off(ndev); 1414 for (cnt = 0; cnt < ETH_ALEN; cnt++) 1415 ndev->dev_addr[cnt] = priv->mac_addr[cnt]; 1416 1417 /* Configuration items */ 1418 priv->rx_buf_size = EMAC_DEF_MAX_FRAME_SIZE + NET_IP_ALIGN; 1419 1420 priv->mac_hash1 = 0; 1421 priv->mac_hash2 = 0; 1422 emac_write(EMAC_MACHASH1, 0); 1423 emac_write(EMAC_MACHASH2, 0); 1424 1425 for (i = 0; i < EMAC_DEF_RX_NUM_DESC; i++) { 1426 struct sk_buff *skb = emac_rx_alloc(priv); 1427 1428 if (!skb) 1429 break; 1430 1431 ret = cpdma_chan_idle_submit(priv->rxchan, skb, skb->data, 1432 skb_tailroom(skb), 0); 1433 if (WARN_ON(ret < 0)) 1434 break; 1435 } 1436 1437 /* Request IRQ */ 1438 while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, 1439 res_num))) { 1440 for (irq_num = res->start; irq_num <= res->end; irq_num++) { 1441 if (request_irq(irq_num, emac_irq, 0, ndev->name, 1442 ndev)) { 1443 dev_err(emac_dev, 1444 "DaVinci EMAC: request_irq() failed\n"); 1445 ret = -EBUSY; 1446 1447 goto rollback; 1448 } 1449 } 1450 res_num++; 1451 } 1452 /* prepare counters for rollback in case of an error */ 1453 res_num--; 1454 irq_num--; 1455 1456 /* Start/Enable EMAC hardware */ 1457 emac_hw_enable(priv); 1458 1459 /* Enable Interrupt pacing if configured */ 1460 if (priv->coal_intvl != 0) { 1461 struct ethtool_coalesce coal; 1462 1463 coal.rx_coalesce_usecs = (priv->coal_intvl << 4); 1464 emac_set_coalesce(ndev, &coal); 1465 } 1466 1467 cpdma_ctlr_start(priv->dma); 1468 1469 if (priv->phy_node) { 1470 phydev = of_phy_connect(ndev, priv->phy_node, 1471 &emac_adjust_link, 0, 0); 1472 if (!phydev) { 1473 dev_err(emac_dev, "could not connect to phy %pOF\n", 1474 priv->phy_node); 1475 ret = -ENODEV; 1476 goto err; 1477 } 1478 } 1479 1480 /* use the first phy on the bus if pdata did not give us a phy id */ 1481 if (!phydev && !priv->phy_id) { 1482 /* NOTE: we can't use bus_find_device_by_name() here because 1483 * the device name is not guaranteed to be 'davinci_mdio'. On 1484 * some systems it can be 'davinci_mdio.0' so we need to use 1485 * strncmp() against the first part of the string to correctly 1486 * match it. 1487 */ 1488 phy = bus_find_device(&mdio_bus_type, NULL, NULL, 1489 match_first_device); 1490 if (phy) { 1491 priv->phy_id = dev_name(phy); 1492 if (!priv->phy_id || !*priv->phy_id) 1493 put_device(phy); 1494 } 1495 } 1496 1497 if (!phydev && priv->phy_id && *priv->phy_id) { 1498 phydev = phy_connect(ndev, priv->phy_id, 1499 &emac_adjust_link, 1500 PHY_INTERFACE_MODE_MII); 1501 put_device(phy); /* reference taken by bus_find_device */ 1502 if (IS_ERR(phydev)) { 1503 dev_err(emac_dev, "could not connect to phy %s\n", 1504 priv->phy_id); 1505 ret = PTR_ERR(phydev); 1506 goto err; 1507 } 1508 1509 priv->link = 0; 1510 priv->speed = 0; 1511 priv->duplex = ~0; 1512 1513 phy_attached_info(phydev); 1514 } 1515 1516 if (!phydev) { 1517 /* No PHY , fix the link, speed and duplex settings */ 1518 dev_notice(emac_dev, "no phy, defaulting to 100/full\n"); 1519 priv->link = 1; 1520 priv->speed = SPEED_100; 1521 priv->duplex = DUPLEX_FULL; 1522 emac_update_phystatus(priv); 1523 } 1524 1525 if (netif_msg_drv(priv)) 1526 dev_notice(emac_dev, "DaVinci EMAC: Opened %s\n", ndev->name); 1527 1528 if (phydev) 1529 phy_start(phydev); 1530 1531 return 0; 1532 1533 err: 1534 emac_int_disable(priv); 1535 napi_disable(&priv->napi); 1536 1537 rollback: 1538 for (q = res_num; q >= 0; q--) { 1539 res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, q); 1540 /* at the first iteration, irq_num is already set to the 1541 * right value 1542 */ 1543 if (q != res_num) 1544 irq_num = res->end; 1545 1546 for (m = irq_num; m >= res->start; m--) 1547 free_irq(m, ndev); 1548 } 1549 cpdma_ctlr_stop(priv->dma); 1550 pm_runtime_put(&priv->pdev->dev); 1551 return ret; 1552 } 1553 1554 /** 1555 * emac_dev_stop - EMAC device stop 1556 * @ndev: The DaVinci EMAC network adapter 1557 * 1558 * Called when system wants to stop or down the interface. We stop the network 1559 * queue, disable interrupts and cleanup TX/RX channels. 1560 * 1561 * We return the statistics in net_device_stats structure pulled from emac 1562 */ 1563 static int emac_dev_stop(struct net_device *ndev) 1564 { 1565 struct resource *res; 1566 int i = 0; 1567 int irq_num; 1568 struct emac_priv *priv = netdev_priv(ndev); 1569 struct device *emac_dev = &ndev->dev; 1570 1571 /* inform the upper layers. */ 1572 netif_stop_queue(ndev); 1573 napi_disable(&priv->napi); 1574 1575 netif_carrier_off(ndev); 1576 emac_int_disable(priv); 1577 cpdma_ctlr_stop(priv->dma); 1578 emac_write(EMAC_SOFTRESET, 1); 1579 1580 if (ndev->phydev) 1581 phy_disconnect(ndev->phydev); 1582 1583 /* Free IRQ */ 1584 while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, i))) { 1585 for (irq_num = res->start; irq_num <= res->end; irq_num++) 1586 free_irq(irq_num, priv->ndev); 1587 i++; 1588 } 1589 1590 if (netif_msg_drv(priv)) 1591 dev_notice(emac_dev, "DaVinci EMAC: %s stopped\n", ndev->name); 1592 1593 pm_runtime_put(&priv->pdev->dev); 1594 return 0; 1595 } 1596 1597 /** 1598 * emac_dev_getnetstats - EMAC get statistics function 1599 * @ndev: The DaVinci EMAC network adapter 1600 * 1601 * Called when system wants to get statistics from the device. 1602 * 1603 * We return the statistics in net_device_stats structure pulled from emac 1604 */ 1605 static struct net_device_stats *emac_dev_getnetstats(struct net_device *ndev) 1606 { 1607 struct emac_priv *priv = netdev_priv(ndev); 1608 u32 mac_control; 1609 u32 stats_clear_mask; 1610 int err; 1611 1612 err = pm_runtime_get_sync(&priv->pdev->dev); 1613 if (err < 0) { 1614 pm_runtime_put_noidle(&priv->pdev->dev); 1615 dev_err(&priv->pdev->dev, "%s: failed to get_sync(%d)\n", 1616 __func__, err); 1617 return &ndev->stats; 1618 } 1619 1620 /* update emac hardware stats and reset the registers*/ 1621 1622 mac_control = emac_read(EMAC_MACCONTROL); 1623 1624 if (mac_control & EMAC_MACCONTROL_GMIIEN) 1625 stats_clear_mask = EMAC_STATS_CLR_MASK; 1626 else 1627 stats_clear_mask = 0; 1628 1629 ndev->stats.multicast += emac_read(EMAC_RXMCASTFRAMES); 1630 emac_write(EMAC_RXMCASTFRAMES, stats_clear_mask); 1631 1632 ndev->stats.collisions += (emac_read(EMAC_TXCOLLISION) + 1633 emac_read(EMAC_TXSINGLECOLL) + 1634 emac_read(EMAC_TXMULTICOLL)); 1635 emac_write(EMAC_TXCOLLISION, stats_clear_mask); 1636 emac_write(EMAC_TXSINGLECOLL, stats_clear_mask); 1637 emac_write(EMAC_TXMULTICOLL, stats_clear_mask); 1638 1639 ndev->stats.rx_length_errors += (emac_read(EMAC_RXOVERSIZED) + 1640 emac_read(EMAC_RXJABBER) + 1641 emac_read(EMAC_RXUNDERSIZED)); 1642 emac_write(EMAC_RXOVERSIZED, stats_clear_mask); 1643 emac_write(EMAC_RXJABBER, stats_clear_mask); 1644 emac_write(EMAC_RXUNDERSIZED, stats_clear_mask); 1645 1646 ndev->stats.rx_over_errors += (emac_read(EMAC_RXSOFOVERRUNS) + 1647 emac_read(EMAC_RXMOFOVERRUNS)); 1648 emac_write(EMAC_RXSOFOVERRUNS, stats_clear_mask); 1649 emac_write(EMAC_RXMOFOVERRUNS, stats_clear_mask); 1650 1651 ndev->stats.rx_fifo_errors += emac_read(EMAC_RXDMAOVERRUNS); 1652 emac_write(EMAC_RXDMAOVERRUNS, stats_clear_mask); 1653 1654 ndev->stats.tx_carrier_errors += 1655 emac_read(EMAC_TXCARRIERSENSE); 1656 emac_write(EMAC_TXCARRIERSENSE, stats_clear_mask); 1657 1658 ndev->stats.tx_fifo_errors += emac_read(EMAC_TXUNDERRUN); 1659 emac_write(EMAC_TXUNDERRUN, stats_clear_mask); 1660 1661 pm_runtime_put(&priv->pdev->dev); 1662 1663 return &ndev->stats; 1664 } 1665 1666 static const struct net_device_ops emac_netdev_ops = { 1667 .ndo_open = emac_dev_open, 1668 .ndo_stop = emac_dev_stop, 1669 .ndo_start_xmit = emac_dev_xmit, 1670 .ndo_set_rx_mode = emac_dev_mcast_set, 1671 .ndo_set_mac_address = emac_dev_setmac_addr, 1672 .ndo_do_ioctl = emac_devioctl, 1673 .ndo_tx_timeout = emac_dev_tx_timeout, 1674 .ndo_get_stats = emac_dev_getnetstats, 1675 #ifdef CONFIG_NET_POLL_CONTROLLER 1676 .ndo_poll_controller = emac_poll_controller, 1677 #endif 1678 }; 1679 1680 static const struct of_device_id davinci_emac_of_match[]; 1681 1682 static struct emac_platform_data * 1683 davinci_emac_of_get_pdata(struct platform_device *pdev, struct emac_priv *priv) 1684 { 1685 struct device_node *np; 1686 const struct of_device_id *match; 1687 const struct emac_platform_data *auxdata; 1688 struct emac_platform_data *pdata = NULL; 1689 const u8 *mac_addr; 1690 1691 if (!IS_ENABLED(CONFIG_OF) || !pdev->dev.of_node) 1692 return dev_get_platdata(&pdev->dev); 1693 1694 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); 1695 if (!pdata) 1696 return NULL; 1697 1698 np = pdev->dev.of_node; 1699 pdata->version = EMAC_VERSION_2; 1700 1701 if (!is_valid_ether_addr(pdata->mac_addr)) { 1702 mac_addr = of_get_mac_address(np); 1703 if (!IS_ERR(mac_addr)) 1704 ether_addr_copy(pdata->mac_addr, mac_addr); 1705 } 1706 1707 of_property_read_u32(np, "ti,davinci-ctrl-reg-offset", 1708 &pdata->ctrl_reg_offset); 1709 1710 of_property_read_u32(np, "ti,davinci-ctrl-mod-reg-offset", 1711 &pdata->ctrl_mod_reg_offset); 1712 1713 of_property_read_u32(np, "ti,davinci-ctrl-ram-offset", 1714 &pdata->ctrl_ram_offset); 1715 1716 of_property_read_u32(np, "ti,davinci-ctrl-ram-size", 1717 &pdata->ctrl_ram_size); 1718 1719 of_property_read_u8(np, "ti,davinci-rmii-en", &pdata->rmii_en); 1720 1721 pdata->no_bd_ram = of_property_read_bool(np, "ti,davinci-no-bd-ram"); 1722 1723 priv->phy_node = of_parse_phandle(np, "phy-handle", 0); 1724 if (!priv->phy_node) { 1725 if (!of_phy_is_fixed_link(np)) 1726 pdata->phy_id = NULL; 1727 else if (of_phy_register_fixed_link(np) >= 0) 1728 priv->phy_node = of_node_get(np); 1729 } 1730 1731 auxdata = pdev->dev.platform_data; 1732 if (auxdata) { 1733 pdata->interrupt_enable = auxdata->interrupt_enable; 1734 pdata->interrupt_disable = auxdata->interrupt_disable; 1735 } 1736 1737 match = of_match_device(davinci_emac_of_match, &pdev->dev); 1738 if (match && match->data) { 1739 auxdata = match->data; 1740 pdata->version = auxdata->version; 1741 pdata->hw_ram_addr = auxdata->hw_ram_addr; 1742 } 1743 1744 return pdata; 1745 } 1746 1747 static int davinci_emac_try_get_mac(struct platform_device *pdev, 1748 int instance, u8 *mac_addr) 1749 { 1750 if (!pdev->dev.of_node) 1751 return -EINVAL; 1752 1753 return ti_cm_get_macid(&pdev->dev, instance, mac_addr); 1754 } 1755 1756 /** 1757 * davinci_emac_probe - EMAC device probe 1758 * @pdev: The DaVinci EMAC device that we are removing 1759 * 1760 * Called when probing for emac devicesr. We get details of instances and 1761 * resource information from platform init and register a network device 1762 * and allocate resources necessary for driver to perform 1763 */ 1764 static int davinci_emac_probe(struct platform_device *pdev) 1765 { 1766 struct device_node *np = pdev->dev.of_node; 1767 int rc = 0; 1768 struct resource *res, *res_ctrl; 1769 struct net_device *ndev; 1770 struct emac_priv *priv; 1771 unsigned long hw_ram_addr; 1772 struct emac_platform_data *pdata; 1773 struct cpdma_params dma_params; 1774 struct clk *emac_clk; 1775 unsigned long emac_bus_frequency; 1776 1777 1778 /* obtain emac clock from kernel */ 1779 emac_clk = devm_clk_get(&pdev->dev, NULL); 1780 if (IS_ERR(emac_clk)) { 1781 dev_err(&pdev->dev, "failed to get EMAC clock\n"); 1782 return -EBUSY; 1783 } 1784 emac_bus_frequency = clk_get_rate(emac_clk); 1785 devm_clk_put(&pdev->dev, emac_clk); 1786 1787 /* TODO: Probe PHY here if possible */ 1788 1789 ndev = alloc_etherdev(sizeof(struct emac_priv)); 1790 if (!ndev) 1791 return -ENOMEM; 1792 1793 platform_set_drvdata(pdev, ndev); 1794 priv = netdev_priv(ndev); 1795 priv->pdev = pdev; 1796 priv->ndev = ndev; 1797 priv->msg_enable = netif_msg_init(debug_level, DAVINCI_EMAC_DEBUG); 1798 1799 spin_lock_init(&priv->lock); 1800 1801 pdata = davinci_emac_of_get_pdata(pdev, priv); 1802 if (!pdata) { 1803 dev_err(&pdev->dev, "no platform data\n"); 1804 rc = -ENODEV; 1805 goto err_free_netdev; 1806 } 1807 1808 /* MAC addr and PHY mask , RMII enable info from platform_data */ 1809 memcpy(priv->mac_addr, pdata->mac_addr, ETH_ALEN); 1810 priv->phy_id = pdata->phy_id; 1811 priv->rmii_en = pdata->rmii_en; 1812 priv->version = pdata->version; 1813 priv->int_enable = pdata->interrupt_enable; 1814 priv->int_disable = pdata->interrupt_disable; 1815 1816 priv->coal_intvl = 0; 1817 priv->bus_freq_mhz = (u32)(emac_bus_frequency / 1000000); 1818 1819 /* Get EMAC platform data */ 1820 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 1821 priv->emac_base_phys = res->start + pdata->ctrl_reg_offset; 1822 priv->remap_addr = devm_ioremap_resource(&pdev->dev, res); 1823 if (IS_ERR(priv->remap_addr)) { 1824 rc = PTR_ERR(priv->remap_addr); 1825 goto no_pdata; 1826 } 1827 1828 res_ctrl = platform_get_resource(pdev, IORESOURCE_MEM, 1); 1829 if (res_ctrl) { 1830 priv->ctrl_base = 1831 devm_ioremap_resource(&pdev->dev, res_ctrl); 1832 if (IS_ERR(priv->ctrl_base)) { 1833 rc = PTR_ERR(priv->ctrl_base); 1834 goto no_pdata; 1835 } 1836 } else { 1837 priv->ctrl_base = priv->remap_addr + pdata->ctrl_mod_reg_offset; 1838 } 1839 1840 priv->emac_base = priv->remap_addr + pdata->ctrl_reg_offset; 1841 ndev->base_addr = (unsigned long)priv->remap_addr; 1842 1843 hw_ram_addr = pdata->hw_ram_addr; 1844 if (!hw_ram_addr) 1845 hw_ram_addr = (u32 __force)res->start + pdata->ctrl_ram_offset; 1846 1847 memset(&dma_params, 0, sizeof(dma_params)); 1848 dma_params.dev = &pdev->dev; 1849 dma_params.dmaregs = priv->emac_base; 1850 dma_params.rxthresh = priv->emac_base + 0x120; 1851 dma_params.rxfree = priv->emac_base + 0x140; 1852 dma_params.txhdp = priv->emac_base + 0x600; 1853 dma_params.rxhdp = priv->emac_base + 0x620; 1854 dma_params.txcp = priv->emac_base + 0x640; 1855 dma_params.rxcp = priv->emac_base + 0x660; 1856 dma_params.num_chan = EMAC_MAX_TXRX_CHANNELS; 1857 dma_params.min_packet_size = EMAC_DEF_MIN_ETHPKTSIZE; 1858 dma_params.desc_hw_addr = hw_ram_addr; 1859 dma_params.desc_mem_size = pdata->ctrl_ram_size; 1860 dma_params.desc_align = 16; 1861 1862 dma_params.desc_mem_phys = pdata->no_bd_ram ? 0 : 1863 (u32 __force)res->start + pdata->ctrl_ram_offset; 1864 1865 priv->dma = cpdma_ctlr_create(&dma_params); 1866 if (!priv->dma) { 1867 dev_err(&pdev->dev, "error initializing DMA\n"); 1868 rc = -ENOMEM; 1869 goto no_pdata; 1870 } 1871 1872 priv->txchan = cpdma_chan_create(priv->dma, EMAC_DEF_TX_CH, 1873 emac_tx_handler, 0); 1874 if (IS_ERR(priv->txchan)) { 1875 dev_err(&pdev->dev, "error initializing tx dma channel\n"); 1876 rc = PTR_ERR(priv->txchan); 1877 goto err_free_dma; 1878 } 1879 1880 priv->rxchan = cpdma_chan_create(priv->dma, EMAC_DEF_RX_CH, 1881 emac_rx_handler, 1); 1882 if (IS_ERR(priv->rxchan)) { 1883 dev_err(&pdev->dev, "error initializing rx dma channel\n"); 1884 rc = PTR_ERR(priv->rxchan); 1885 goto err_free_txchan; 1886 } 1887 1888 res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); 1889 if (!res) { 1890 dev_err(&pdev->dev, "error getting irq res\n"); 1891 rc = -ENOENT; 1892 goto err_free_rxchan; 1893 } 1894 ndev->irq = res->start; 1895 1896 rc = davinci_emac_try_get_mac(pdev, res_ctrl ? 0 : 1, priv->mac_addr); 1897 if (!rc) 1898 ether_addr_copy(ndev->dev_addr, priv->mac_addr); 1899 1900 if (!is_valid_ether_addr(priv->mac_addr)) { 1901 /* Use random MAC if still none obtained. */ 1902 eth_hw_addr_random(ndev); 1903 memcpy(priv->mac_addr, ndev->dev_addr, ndev->addr_len); 1904 dev_warn(&pdev->dev, "using random MAC addr: %pM\n", 1905 priv->mac_addr); 1906 } 1907 1908 ndev->netdev_ops = &emac_netdev_ops; 1909 ndev->ethtool_ops = ðtool_ops; 1910 netif_napi_add(ndev, &priv->napi, emac_poll, EMAC_POLL_WEIGHT); 1911 1912 pm_runtime_enable(&pdev->dev); 1913 rc = pm_runtime_get_sync(&pdev->dev); 1914 if (rc < 0) { 1915 pm_runtime_put_noidle(&pdev->dev); 1916 dev_err(&pdev->dev, "%s: failed to get_sync(%d)\n", 1917 __func__, rc); 1918 goto err_napi_del; 1919 } 1920 1921 /* register the network device */ 1922 SET_NETDEV_DEV(ndev, &pdev->dev); 1923 rc = register_netdev(ndev); 1924 if (rc) { 1925 dev_err(&pdev->dev, "error in register_netdev\n"); 1926 rc = -ENODEV; 1927 pm_runtime_put(&pdev->dev); 1928 goto err_napi_del; 1929 } 1930 1931 1932 if (netif_msg_probe(priv)) { 1933 dev_notice(&pdev->dev, "DaVinci EMAC Probe found device " 1934 "(regs: %pa, irq: %d)\n", 1935 &priv->emac_base_phys, ndev->irq); 1936 } 1937 pm_runtime_put(&pdev->dev); 1938 1939 return 0; 1940 1941 err_napi_del: 1942 netif_napi_del(&priv->napi); 1943 err_free_rxchan: 1944 cpdma_chan_destroy(priv->rxchan); 1945 err_free_txchan: 1946 cpdma_chan_destroy(priv->txchan); 1947 err_free_dma: 1948 cpdma_ctlr_destroy(priv->dma); 1949 no_pdata: 1950 if (of_phy_is_fixed_link(np)) 1951 of_phy_deregister_fixed_link(np); 1952 of_node_put(priv->phy_node); 1953 err_free_netdev: 1954 free_netdev(ndev); 1955 return rc; 1956 } 1957 1958 /** 1959 * davinci_emac_remove - EMAC device remove 1960 * @pdev: The DaVinci EMAC device that we are removing 1961 * 1962 * Called when removing the device driver. We disable clock usage and release 1963 * the resources taken up by the driver and unregister network device 1964 */ 1965 static int davinci_emac_remove(struct platform_device *pdev) 1966 { 1967 struct net_device *ndev = platform_get_drvdata(pdev); 1968 struct emac_priv *priv = netdev_priv(ndev); 1969 struct device_node *np = pdev->dev.of_node; 1970 1971 dev_notice(&ndev->dev, "DaVinci EMAC: davinci_emac_remove()\n"); 1972 1973 if (priv->txchan) 1974 cpdma_chan_destroy(priv->txchan); 1975 if (priv->rxchan) 1976 cpdma_chan_destroy(priv->rxchan); 1977 cpdma_ctlr_destroy(priv->dma); 1978 1979 unregister_netdev(ndev); 1980 of_node_put(priv->phy_node); 1981 pm_runtime_disable(&pdev->dev); 1982 if (of_phy_is_fixed_link(np)) 1983 of_phy_deregister_fixed_link(np); 1984 free_netdev(ndev); 1985 1986 return 0; 1987 } 1988 1989 static int davinci_emac_suspend(struct device *dev) 1990 { 1991 struct net_device *ndev = dev_get_drvdata(dev); 1992 1993 if (netif_running(ndev)) 1994 emac_dev_stop(ndev); 1995 1996 return 0; 1997 } 1998 1999 static int davinci_emac_resume(struct device *dev) 2000 { 2001 struct net_device *ndev = dev_get_drvdata(dev); 2002 2003 if (netif_running(ndev)) 2004 emac_dev_open(ndev); 2005 2006 return 0; 2007 } 2008 2009 static const struct dev_pm_ops davinci_emac_pm_ops = { 2010 .suspend = davinci_emac_suspend, 2011 .resume = davinci_emac_resume, 2012 }; 2013 2014 static const struct emac_platform_data am3517_emac_data = { 2015 .version = EMAC_VERSION_2, 2016 .hw_ram_addr = 0x01e20000, 2017 }; 2018 2019 static const struct emac_platform_data dm816_emac_data = { 2020 .version = EMAC_VERSION_2, 2021 }; 2022 2023 static const struct of_device_id davinci_emac_of_match[] = { 2024 {.compatible = "ti,davinci-dm6467-emac", }, 2025 {.compatible = "ti,am3517-emac", .data = &am3517_emac_data, }, 2026 {.compatible = "ti,dm816-emac", .data = &dm816_emac_data, }, 2027 {}, 2028 }; 2029 MODULE_DEVICE_TABLE(of, davinci_emac_of_match); 2030 2031 /* davinci_emac_driver: EMAC platform driver structure */ 2032 static struct platform_driver davinci_emac_driver = { 2033 .driver = { 2034 .name = "davinci_emac", 2035 .pm = &davinci_emac_pm_ops, 2036 .of_match_table = davinci_emac_of_match, 2037 }, 2038 .probe = davinci_emac_probe, 2039 .remove = davinci_emac_remove, 2040 }; 2041 2042 /** 2043 * davinci_emac_init - EMAC driver module init 2044 * 2045 * Called when initializing the driver. We register the driver with 2046 * the platform. 2047 */ 2048 static int __init davinci_emac_init(void) 2049 { 2050 return platform_driver_register(&davinci_emac_driver); 2051 } 2052 late_initcall(davinci_emac_init); 2053 2054 /** 2055 * davinci_emac_exit - EMAC driver module exit 2056 * 2057 * Called when exiting the driver completely. We unregister the driver with 2058 * the platform and exit 2059 */ 2060 static void __exit davinci_emac_exit(void) 2061 { 2062 platform_driver_unregister(&davinci_emac_driver); 2063 } 2064 module_exit(davinci_emac_exit); 2065 2066 MODULE_LICENSE("GPL"); 2067 MODULE_AUTHOR("DaVinci EMAC Maintainer: Anant Gole <anantgole@ti.com>"); 2068 MODULE_AUTHOR("DaVinci EMAC Maintainer: Chaithrika U S <chaithrika@ti.com>"); 2069 MODULE_DESCRIPTION("DaVinci EMAC Ethernet driver"); 2070