1 /* 2 * DaVinci Ethernet Medium Access Controller 3 * 4 * DaVinci EMAC is based upon CPPI 3.0 TI DMA engine 5 * 6 * Copyright (C) 2009 Texas Instruments. 7 * 8 * --------------------------------------------------------------------------- 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License as published by 12 * the Free Software Foundation; either version 2 of the License, or 13 * (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 23 * --------------------------------------------------------------------------- 24 * History: 25 * 0-5 A number of folks worked on this driver in bits and pieces but the major 26 * contribution came from Suraj Iyer and Anant Gole 27 * 6.0 Anant Gole - rewrote the driver as per Linux conventions 28 * 6.1 Chaithrika U S - added support for Gigabit and RMII features, 29 * PHY layer usage 30 */ 31 32 #include <linux/module.h> 33 #include <linux/kernel.h> 34 #include <linux/sched.h> 35 #include <linux/string.h> 36 #include <linux/timer.h> 37 #include <linux/errno.h> 38 #include <linux/in.h> 39 #include <linux/ioport.h> 40 #include <linux/slab.h> 41 #include <linux/mm.h> 42 #include <linux/interrupt.h> 43 #include <linux/init.h> 44 #include <linux/netdevice.h> 45 #include <linux/etherdevice.h> 46 #include <linux/skbuff.h> 47 #include <linux/ethtool.h> 48 #include <linux/highmem.h> 49 #include <linux/proc_fs.h> 50 #include <linux/ctype.h> 51 #include <linux/spinlock.h> 52 #include <linux/dma-mapping.h> 53 #include <linux/clk.h> 54 #include <linux/platform_device.h> 55 #include <linux/regmap.h> 56 #include <linux/semaphore.h> 57 #include <linux/phy.h> 58 #include <linux/bitops.h> 59 #include <linux/io.h> 60 #include <linux/uaccess.h> 61 #include <linux/pm_runtime.h> 62 #include <linux/davinci_emac.h> 63 #include <linux/of.h> 64 #include <linux/of_address.h> 65 #include <linux/of_device.h> 66 #include <linux/of_mdio.h> 67 #include <linux/of_irq.h> 68 #include <linux/of_net.h> 69 #include <linux/mfd/syscon.h> 70 71 #include <asm/irq.h> 72 #include <asm/page.h> 73 74 #include "cpsw.h" 75 #include "davinci_cpdma.h" 76 77 static int debug_level; 78 module_param(debug_level, int, 0); 79 MODULE_PARM_DESC(debug_level, "DaVinci EMAC debug level (NETIF_MSG bits)"); 80 81 /* Netif debug messages possible */ 82 #define DAVINCI_EMAC_DEBUG (NETIF_MSG_DRV | \ 83 NETIF_MSG_PROBE | \ 84 NETIF_MSG_LINK | \ 85 NETIF_MSG_TIMER | \ 86 NETIF_MSG_IFDOWN | \ 87 NETIF_MSG_IFUP | \ 88 NETIF_MSG_RX_ERR | \ 89 NETIF_MSG_TX_ERR | \ 90 NETIF_MSG_TX_QUEUED | \ 91 NETIF_MSG_INTR | \ 92 NETIF_MSG_TX_DONE | \ 93 NETIF_MSG_RX_STATUS | \ 94 NETIF_MSG_PKTDATA | \ 95 NETIF_MSG_HW | \ 96 NETIF_MSG_WOL) 97 98 /* version info */ 99 #define EMAC_MAJOR_VERSION 6 100 #define EMAC_MINOR_VERSION 1 101 #define EMAC_MODULE_VERSION "6.1" 102 MODULE_VERSION(EMAC_MODULE_VERSION); 103 static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1"; 104 105 /* Configuration items */ 106 #define EMAC_DEF_PASS_CRC (0) /* Do not pass CRC up to frames */ 107 #define EMAC_DEF_QOS_EN (0) /* EMAC proprietary QoS disabled */ 108 #define EMAC_DEF_NO_BUFF_CHAIN (0) /* No buffer chain */ 109 #define EMAC_DEF_MACCTRL_FRAME_EN (0) /* Discard Maccontrol frames */ 110 #define EMAC_DEF_SHORT_FRAME_EN (0) /* Discard short frames */ 111 #define EMAC_DEF_ERROR_FRAME_EN (0) /* Discard error frames */ 112 #define EMAC_DEF_PROM_EN (0) /* Promiscuous disabled */ 113 #define EMAC_DEF_PROM_CH (0) /* Promiscuous channel is 0 */ 114 #define EMAC_DEF_BCAST_EN (1) /* Broadcast enabled */ 115 #define EMAC_DEF_BCAST_CH (0) /* Broadcast channel is 0 */ 116 #define EMAC_DEF_MCAST_EN (1) /* Multicast enabled */ 117 #define EMAC_DEF_MCAST_CH (0) /* Multicast channel is 0 */ 118 119 #define EMAC_DEF_TXPRIO_FIXED (1) /* TX Priority is fixed */ 120 #define EMAC_DEF_TXPACING_EN (0) /* TX pacing NOT supported*/ 121 122 #define EMAC_DEF_BUFFER_OFFSET (0) /* Buffer offset to DMA (future) */ 123 #define EMAC_DEF_MIN_ETHPKTSIZE (60) /* Minimum ethernet pkt size */ 124 #define EMAC_DEF_MAX_FRAME_SIZE (1500 + 14 + 4 + 4) 125 #define EMAC_DEF_TX_CH (0) /* Default 0th channel */ 126 #define EMAC_DEF_RX_CH (0) /* Default 0th channel */ 127 #define EMAC_DEF_RX_NUM_DESC (128) 128 #define EMAC_DEF_MAX_TX_CH (1) /* Max TX channels configured */ 129 #define EMAC_DEF_MAX_RX_CH (1) /* Max RX channels configured */ 130 #define EMAC_POLL_WEIGHT (64) /* Default NAPI poll weight */ 131 132 /* Buffer descriptor parameters */ 133 #define EMAC_DEF_TX_MAX_SERVICE (32) /* TX max service BD's */ 134 #define EMAC_DEF_RX_MAX_SERVICE (64) /* should = netdev->weight */ 135 136 /* EMAC register related defines */ 137 #define EMAC_ALL_MULTI_REG_VALUE (0xFFFFFFFF) 138 #define EMAC_NUM_MULTICAST_BITS (64) 139 #define EMAC_TX_CONTROL_TX_ENABLE_VAL (0x1) 140 #define EMAC_RX_CONTROL_RX_ENABLE_VAL (0x1) 141 #define EMAC_MAC_HOST_ERR_INTMASK_VAL (0x2) 142 #define EMAC_RX_UNICAST_CLEAR_ALL (0xFF) 143 #define EMAC_INT_MASK_CLEAR (0xFF) 144 145 /* RX MBP register bit positions */ 146 #define EMAC_RXMBP_PASSCRC_MASK BIT(30) 147 #define EMAC_RXMBP_QOSEN_MASK BIT(29) 148 #define EMAC_RXMBP_NOCHAIN_MASK BIT(28) 149 #define EMAC_RXMBP_CMFEN_MASK BIT(24) 150 #define EMAC_RXMBP_CSFEN_MASK BIT(23) 151 #define EMAC_RXMBP_CEFEN_MASK BIT(22) 152 #define EMAC_RXMBP_CAFEN_MASK BIT(21) 153 #define EMAC_RXMBP_PROMCH_SHIFT (16) 154 #define EMAC_RXMBP_PROMCH_MASK (0x7 << 16) 155 #define EMAC_RXMBP_BROADEN_MASK BIT(13) 156 #define EMAC_RXMBP_BROADCH_SHIFT (8) 157 #define EMAC_RXMBP_BROADCH_MASK (0x7 << 8) 158 #define EMAC_RXMBP_MULTIEN_MASK BIT(5) 159 #define EMAC_RXMBP_MULTICH_SHIFT (0) 160 #define EMAC_RXMBP_MULTICH_MASK (0x7) 161 #define EMAC_RXMBP_CHMASK (0x7) 162 163 /* EMAC register definitions/bit maps used */ 164 # define EMAC_MBP_RXPROMISC (0x00200000) 165 # define EMAC_MBP_PROMISCCH(ch) (((ch) & 0x7) << 16) 166 # define EMAC_MBP_RXBCAST (0x00002000) 167 # define EMAC_MBP_BCASTCHAN(ch) (((ch) & 0x7) << 8) 168 # define EMAC_MBP_RXMCAST (0x00000020) 169 # define EMAC_MBP_MCASTCHAN(ch) ((ch) & 0x7) 170 171 /* EMAC mac_control register */ 172 #define EMAC_MACCONTROL_TXPTYPE BIT(9) 173 #define EMAC_MACCONTROL_TXPACEEN BIT(6) 174 #define EMAC_MACCONTROL_GMIIEN BIT(5) 175 #define EMAC_MACCONTROL_GIGABITEN BIT(7) 176 #define EMAC_MACCONTROL_FULLDUPLEXEN BIT(0) 177 #define EMAC_MACCONTROL_RMIISPEED_MASK BIT(15) 178 179 /* GIGABIT MODE related bits */ 180 #define EMAC_DM646X_MACCONTORL_GIG BIT(7) 181 #define EMAC_DM646X_MACCONTORL_GIGFORCE BIT(17) 182 183 /* EMAC mac_status register */ 184 #define EMAC_MACSTATUS_TXERRCODE_MASK (0xF00000) 185 #define EMAC_MACSTATUS_TXERRCODE_SHIFT (20) 186 #define EMAC_MACSTATUS_TXERRCH_MASK (0x7) 187 #define EMAC_MACSTATUS_TXERRCH_SHIFT (16) 188 #define EMAC_MACSTATUS_RXERRCODE_MASK (0xF000) 189 #define EMAC_MACSTATUS_RXERRCODE_SHIFT (12) 190 #define EMAC_MACSTATUS_RXERRCH_MASK (0x7) 191 #define EMAC_MACSTATUS_RXERRCH_SHIFT (8) 192 193 /* EMAC RX register masks */ 194 #define EMAC_RX_MAX_LEN_MASK (0xFFFF) 195 #define EMAC_RX_BUFFER_OFFSET_MASK (0xFFFF) 196 197 /* MAC_IN_VECTOR (0x180) register bit fields */ 198 #define EMAC_DM644X_MAC_IN_VECTOR_HOST_INT BIT(17) 199 #define EMAC_DM644X_MAC_IN_VECTOR_STATPEND_INT BIT(16) 200 #define EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC BIT(8) 201 #define EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC BIT(0) 202 203 /** NOTE:: For DM646x the IN_VECTOR has changed */ 204 #define EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC BIT(EMAC_DEF_RX_CH) 205 #define EMAC_DM646X_MAC_IN_VECTOR_TX_INT_VEC BIT(16 + EMAC_DEF_TX_CH) 206 #define EMAC_DM646X_MAC_IN_VECTOR_HOST_INT BIT(26) 207 #define EMAC_DM646X_MAC_IN_VECTOR_STATPEND_INT BIT(27) 208 209 /* CPPI bit positions */ 210 #define EMAC_CPPI_SOP_BIT BIT(31) 211 #define EMAC_CPPI_EOP_BIT BIT(30) 212 #define EMAC_CPPI_OWNERSHIP_BIT BIT(29) 213 #define EMAC_CPPI_EOQ_BIT BIT(28) 214 #define EMAC_CPPI_TEARDOWN_COMPLETE_BIT BIT(27) 215 #define EMAC_CPPI_PASS_CRC_BIT BIT(26) 216 #define EMAC_RX_BD_BUF_SIZE (0xFFFF) 217 #define EMAC_BD_LENGTH_FOR_CACHE (16) /* only CPPI bytes */ 218 #define EMAC_RX_BD_PKT_LENGTH_MASK (0xFFFF) 219 220 /* Max hardware defines */ 221 #define EMAC_MAX_TXRX_CHANNELS (8) /* Max hardware channels */ 222 #define EMAC_DEF_MAX_MULTICAST_ADDRESSES (64) /* Max mcast addr's */ 223 224 /* EMAC Peripheral Device Register Memory Layout structure */ 225 #define EMAC_MACINVECTOR 0x90 226 227 #define EMAC_DM646X_MACEOIVECTOR 0x94 228 229 #define EMAC_MACINTSTATRAW 0xB0 230 #define EMAC_MACINTSTATMASKED 0xB4 231 #define EMAC_MACINTMASKSET 0xB8 232 #define EMAC_MACINTMASKCLEAR 0xBC 233 234 #define EMAC_RXMBPENABLE 0x100 235 #define EMAC_RXUNICASTSET 0x104 236 #define EMAC_RXUNICASTCLEAR 0x108 237 #define EMAC_RXMAXLEN 0x10C 238 #define EMAC_RXBUFFEROFFSET 0x110 239 #define EMAC_RXFILTERLOWTHRESH 0x114 240 241 #define EMAC_MACCONTROL 0x160 242 #define EMAC_MACSTATUS 0x164 243 #define EMAC_EMCONTROL 0x168 244 #define EMAC_FIFOCONTROL 0x16C 245 #define EMAC_MACCONFIG 0x170 246 #define EMAC_SOFTRESET 0x174 247 #define EMAC_MACSRCADDRLO 0x1D0 248 #define EMAC_MACSRCADDRHI 0x1D4 249 #define EMAC_MACHASH1 0x1D8 250 #define EMAC_MACHASH2 0x1DC 251 #define EMAC_MACADDRLO 0x500 252 #define EMAC_MACADDRHI 0x504 253 #define EMAC_MACINDEX 0x508 254 255 /* EMAC statistics registers */ 256 #define EMAC_RXGOODFRAMES 0x200 257 #define EMAC_RXBCASTFRAMES 0x204 258 #define EMAC_RXMCASTFRAMES 0x208 259 #define EMAC_RXPAUSEFRAMES 0x20C 260 #define EMAC_RXCRCERRORS 0x210 261 #define EMAC_RXALIGNCODEERRORS 0x214 262 #define EMAC_RXOVERSIZED 0x218 263 #define EMAC_RXJABBER 0x21C 264 #define EMAC_RXUNDERSIZED 0x220 265 #define EMAC_RXFRAGMENTS 0x224 266 #define EMAC_RXFILTERED 0x228 267 #define EMAC_RXQOSFILTERED 0x22C 268 #define EMAC_RXOCTETS 0x230 269 #define EMAC_TXGOODFRAMES 0x234 270 #define EMAC_TXBCASTFRAMES 0x238 271 #define EMAC_TXMCASTFRAMES 0x23C 272 #define EMAC_TXPAUSEFRAMES 0x240 273 #define EMAC_TXDEFERRED 0x244 274 #define EMAC_TXCOLLISION 0x248 275 #define EMAC_TXSINGLECOLL 0x24C 276 #define EMAC_TXMULTICOLL 0x250 277 #define EMAC_TXEXCESSIVECOLL 0x254 278 #define EMAC_TXLATECOLL 0x258 279 #define EMAC_TXUNDERRUN 0x25C 280 #define EMAC_TXCARRIERSENSE 0x260 281 #define EMAC_TXOCTETS 0x264 282 #define EMAC_NETOCTETS 0x280 283 #define EMAC_RXSOFOVERRUNS 0x284 284 #define EMAC_RXMOFOVERRUNS 0x288 285 #define EMAC_RXDMAOVERRUNS 0x28C 286 287 /* EMAC DM644x control registers */ 288 #define EMAC_CTRL_EWCTL (0x4) 289 #define EMAC_CTRL_EWINTTCNT (0x8) 290 291 /* EMAC DM644x control module masks */ 292 #define EMAC_DM644X_EWINTCNT_MASK 0x1FFFF 293 #define EMAC_DM644X_INTMIN_INTVL 0x1 294 #define EMAC_DM644X_INTMAX_INTVL (EMAC_DM644X_EWINTCNT_MASK) 295 296 /* EMAC DM646X control module registers */ 297 #define EMAC_DM646X_CMINTCTRL 0x0C 298 #define EMAC_DM646X_CMRXINTEN 0x14 299 #define EMAC_DM646X_CMTXINTEN 0x18 300 #define EMAC_DM646X_CMRXINTMAX 0x70 301 #define EMAC_DM646X_CMTXINTMAX 0x74 302 303 /* EMAC DM646X control module masks */ 304 #define EMAC_DM646X_INTPACEEN (0x3 << 16) 305 #define EMAC_DM646X_INTPRESCALE_MASK (0x7FF << 0) 306 #define EMAC_DM646X_CMINTMAX_CNT 63 307 #define EMAC_DM646X_CMINTMIN_CNT 2 308 #define EMAC_DM646X_CMINTMAX_INTVL (1000 / EMAC_DM646X_CMINTMIN_CNT) 309 #define EMAC_DM646X_CMINTMIN_INTVL ((1000 / EMAC_DM646X_CMINTMAX_CNT) + 1) 310 311 312 /* EMAC EOI codes for C0 */ 313 #define EMAC_DM646X_MAC_EOI_C0_RXEN (0x01) 314 #define EMAC_DM646X_MAC_EOI_C0_TXEN (0x02) 315 316 /* EMAC Stats Clear Mask */ 317 #define EMAC_STATS_CLR_MASK (0xFFFFFFFF) 318 319 /* emac_priv: EMAC private data structure 320 * 321 * EMAC adapter private data structure 322 */ 323 struct emac_priv { 324 u32 msg_enable; 325 struct net_device *ndev; 326 struct platform_device *pdev; 327 struct napi_struct napi; 328 char mac_addr[6]; 329 void __iomem *remap_addr; 330 u32 emac_base_phys; 331 void __iomem *emac_base; 332 void __iomem *ctrl_base; 333 struct cpdma_ctlr *dma; 334 struct cpdma_chan *txchan; 335 struct cpdma_chan *rxchan; 336 u32 link; /* 1=link on, 0=link off */ 337 u32 speed; /* 0=Auto Neg, 1=No PHY, 10,100, 1000 - mbps */ 338 u32 duplex; /* Link duplex: 0=Half, 1=Full */ 339 u32 rx_buf_size; 340 u32 isr_count; 341 u32 coal_intvl; 342 u32 bus_freq_mhz; 343 u8 rmii_en; 344 u8 version; 345 u32 mac_hash1; 346 u32 mac_hash2; 347 u32 multicast_hash_cnt[EMAC_NUM_MULTICAST_BITS]; 348 u32 rx_addr_type; 349 const char *phy_id; 350 struct device_node *phy_node; 351 spinlock_t lock; 352 /*platform specific members*/ 353 void (*int_enable) (void); 354 void (*int_disable) (void); 355 }; 356 357 /* EMAC TX Host Error description strings */ 358 static char *emac_txhost_errcodes[16] = { 359 "No error", "SOP error", "Ownership bit not set in SOP buffer", 360 "Zero Next Buffer Descriptor Pointer Without EOP", 361 "Zero Buffer Pointer", "Zero Buffer Length", "Packet Length Error", 362 "Reserved", "Reserved", "Reserved", "Reserved", "Reserved", 363 "Reserved", "Reserved", "Reserved", "Reserved" 364 }; 365 366 /* EMAC RX Host Error description strings */ 367 static char *emac_rxhost_errcodes[16] = { 368 "No error", "Reserved", "Ownership bit not set in input buffer", 369 "Reserved", "Zero Buffer Pointer", "Reserved", "Reserved", 370 "Reserved", "Reserved", "Reserved", "Reserved", "Reserved", 371 "Reserved", "Reserved", "Reserved", "Reserved" 372 }; 373 374 /* Helper macros */ 375 #define emac_read(reg) ioread32(priv->emac_base + (reg)) 376 #define emac_write(reg, val) iowrite32(val, priv->emac_base + (reg)) 377 378 #define emac_ctrl_read(reg) ioread32((priv->ctrl_base + (reg))) 379 #define emac_ctrl_write(reg, val) iowrite32(val, (priv->ctrl_base + (reg))) 380 381 /** 382 * emac_get_drvinfo - Get EMAC driver information 383 * @ndev: The DaVinci EMAC network adapter 384 * @info: ethtool info structure containing name and version 385 * 386 * Returns EMAC driver information (name and version) 387 * 388 */ 389 static void emac_get_drvinfo(struct net_device *ndev, 390 struct ethtool_drvinfo *info) 391 { 392 strlcpy(info->driver, emac_version_string, sizeof(info->driver)); 393 strlcpy(info->version, EMAC_MODULE_VERSION, sizeof(info->version)); 394 } 395 396 /** 397 * emac_get_coalesce - Get interrupt coalesce settings for this device 398 * @ndev : The DaVinci EMAC network adapter 399 * @coal : ethtool coalesce settings structure 400 * 401 * Fetch the current interrupt coalesce settings 402 * 403 */ 404 static int emac_get_coalesce(struct net_device *ndev, 405 struct ethtool_coalesce *coal) 406 { 407 struct emac_priv *priv = netdev_priv(ndev); 408 409 coal->rx_coalesce_usecs = priv->coal_intvl; 410 return 0; 411 412 } 413 414 /** 415 * emac_set_coalesce - Set interrupt coalesce settings for this device 416 * @ndev : The DaVinci EMAC network adapter 417 * @coal : ethtool coalesce settings structure 418 * 419 * Set interrupt coalesce parameters 420 * 421 */ 422 static int emac_set_coalesce(struct net_device *ndev, 423 struct ethtool_coalesce *coal) 424 { 425 struct emac_priv *priv = netdev_priv(ndev); 426 u32 int_ctrl, num_interrupts = 0; 427 u32 prescale = 0, addnl_dvdr = 1, coal_intvl = 0; 428 429 if (!coal->rx_coalesce_usecs) 430 return -EINVAL; 431 432 coal_intvl = coal->rx_coalesce_usecs; 433 434 switch (priv->version) { 435 case EMAC_VERSION_2: 436 int_ctrl = emac_ctrl_read(EMAC_DM646X_CMINTCTRL); 437 prescale = priv->bus_freq_mhz * 4; 438 439 if (coal_intvl < EMAC_DM646X_CMINTMIN_INTVL) 440 coal_intvl = EMAC_DM646X_CMINTMIN_INTVL; 441 442 if (coal_intvl > EMAC_DM646X_CMINTMAX_INTVL) { 443 /* 444 * Interrupt pacer works with 4us Pulse, we can 445 * throttle further by dilating the 4us pulse. 446 */ 447 addnl_dvdr = EMAC_DM646X_INTPRESCALE_MASK / prescale; 448 449 if (addnl_dvdr > 1) { 450 prescale *= addnl_dvdr; 451 if (coal_intvl > (EMAC_DM646X_CMINTMAX_INTVL 452 * addnl_dvdr)) 453 coal_intvl = (EMAC_DM646X_CMINTMAX_INTVL 454 * addnl_dvdr); 455 } else { 456 addnl_dvdr = 1; 457 coal_intvl = EMAC_DM646X_CMINTMAX_INTVL; 458 } 459 } 460 461 num_interrupts = (1000 * addnl_dvdr) / coal_intvl; 462 463 int_ctrl |= EMAC_DM646X_INTPACEEN; 464 int_ctrl &= (~EMAC_DM646X_INTPRESCALE_MASK); 465 int_ctrl |= (prescale & EMAC_DM646X_INTPRESCALE_MASK); 466 emac_ctrl_write(EMAC_DM646X_CMINTCTRL, int_ctrl); 467 468 emac_ctrl_write(EMAC_DM646X_CMRXINTMAX, num_interrupts); 469 emac_ctrl_write(EMAC_DM646X_CMTXINTMAX, num_interrupts); 470 471 break; 472 default: 473 int_ctrl = emac_ctrl_read(EMAC_CTRL_EWINTTCNT); 474 int_ctrl &= (~EMAC_DM644X_EWINTCNT_MASK); 475 prescale = coal_intvl * priv->bus_freq_mhz; 476 if (prescale > EMAC_DM644X_EWINTCNT_MASK) { 477 prescale = EMAC_DM644X_EWINTCNT_MASK; 478 coal_intvl = prescale / priv->bus_freq_mhz; 479 } 480 emac_ctrl_write(EMAC_CTRL_EWINTTCNT, (int_ctrl | prescale)); 481 482 break; 483 } 484 485 printk(KERN_INFO"Set coalesce to %d usecs.\n", coal_intvl); 486 priv->coal_intvl = coal_intvl; 487 488 return 0; 489 490 } 491 492 493 /* ethtool_ops: DaVinci EMAC Ethtool structure 494 * 495 * Ethtool support for EMAC adapter 496 */ 497 static const struct ethtool_ops ethtool_ops = { 498 .get_drvinfo = emac_get_drvinfo, 499 .get_link = ethtool_op_get_link, 500 .get_coalesce = emac_get_coalesce, 501 .set_coalesce = emac_set_coalesce, 502 .get_ts_info = ethtool_op_get_ts_info, 503 .get_link_ksettings = phy_ethtool_get_link_ksettings, 504 .set_link_ksettings = phy_ethtool_set_link_ksettings, 505 }; 506 507 /** 508 * emac_update_phystatus - Update Phy status 509 * @priv: The DaVinci EMAC private adapter structure 510 * 511 * Updates phy status and takes action for network queue if required 512 * based upon link status 513 * 514 */ 515 static void emac_update_phystatus(struct emac_priv *priv) 516 { 517 u32 mac_control; 518 u32 new_duplex; 519 u32 cur_duplex; 520 struct net_device *ndev = priv->ndev; 521 522 mac_control = emac_read(EMAC_MACCONTROL); 523 cur_duplex = (mac_control & EMAC_MACCONTROL_FULLDUPLEXEN) ? 524 DUPLEX_FULL : DUPLEX_HALF; 525 if (ndev->phydev) 526 new_duplex = ndev->phydev->duplex; 527 else 528 new_duplex = DUPLEX_FULL; 529 530 /* We get called only if link has changed (speed/duplex/status) */ 531 if ((priv->link) && (new_duplex != cur_duplex)) { 532 priv->duplex = new_duplex; 533 if (DUPLEX_FULL == priv->duplex) 534 mac_control |= (EMAC_MACCONTROL_FULLDUPLEXEN); 535 else 536 mac_control &= ~(EMAC_MACCONTROL_FULLDUPLEXEN); 537 } 538 539 if (priv->speed == SPEED_1000 && (priv->version == EMAC_VERSION_2)) { 540 mac_control = emac_read(EMAC_MACCONTROL); 541 mac_control |= (EMAC_DM646X_MACCONTORL_GIG | 542 EMAC_DM646X_MACCONTORL_GIGFORCE); 543 } else { 544 /* Clear the GIG bit and GIGFORCE bit */ 545 mac_control &= ~(EMAC_DM646X_MACCONTORL_GIGFORCE | 546 EMAC_DM646X_MACCONTORL_GIG); 547 548 if (priv->rmii_en && (priv->speed == SPEED_100)) 549 mac_control |= EMAC_MACCONTROL_RMIISPEED_MASK; 550 else 551 mac_control &= ~EMAC_MACCONTROL_RMIISPEED_MASK; 552 } 553 554 /* Update mac_control if changed */ 555 emac_write(EMAC_MACCONTROL, mac_control); 556 557 if (priv->link) { 558 /* link ON */ 559 if (!netif_carrier_ok(ndev)) 560 netif_carrier_on(ndev); 561 /* reactivate the transmit queue if it is stopped */ 562 if (netif_running(ndev) && netif_queue_stopped(ndev)) 563 netif_wake_queue(ndev); 564 } else { 565 /* link OFF */ 566 if (netif_carrier_ok(ndev)) 567 netif_carrier_off(ndev); 568 if (!netif_queue_stopped(ndev)) 569 netif_stop_queue(ndev); 570 } 571 } 572 573 /** 574 * hash_get - Calculate hash value from mac address 575 * @addr: mac address to delete from hash table 576 * 577 * Calculates hash value from mac address 578 * 579 */ 580 static u32 hash_get(u8 *addr) 581 { 582 u32 hash; 583 u8 tmpval; 584 int cnt; 585 hash = 0; 586 587 for (cnt = 0; cnt < 2; cnt++) { 588 tmpval = *addr++; 589 hash ^= (tmpval >> 2) ^ (tmpval << 4); 590 tmpval = *addr++; 591 hash ^= (tmpval >> 4) ^ (tmpval << 2); 592 tmpval = *addr++; 593 hash ^= (tmpval >> 6) ^ (tmpval); 594 } 595 596 return hash & 0x3F; 597 } 598 599 /** 600 * hash_add - Hash function to add mac addr from hash table 601 * @priv: The DaVinci EMAC private adapter structure 602 * @mac_addr: mac address to delete from hash table 603 * 604 * Adds mac address to the internal hash table 605 * 606 */ 607 static int hash_add(struct emac_priv *priv, u8 *mac_addr) 608 { 609 struct device *emac_dev = &priv->ndev->dev; 610 u32 rc = 0; 611 u32 hash_bit; 612 u32 hash_value = hash_get(mac_addr); 613 614 if (hash_value >= EMAC_NUM_MULTICAST_BITS) { 615 if (netif_msg_drv(priv)) { 616 dev_err(emac_dev, "DaVinci EMAC: hash_add(): Invalid "\ 617 "Hash %08x, should not be greater than %08x", 618 hash_value, (EMAC_NUM_MULTICAST_BITS - 1)); 619 } 620 return -1; 621 } 622 623 /* set the hash bit only if not previously set */ 624 if (priv->multicast_hash_cnt[hash_value] == 0) { 625 rc = 1; /* hash value changed */ 626 if (hash_value < 32) { 627 hash_bit = BIT(hash_value); 628 priv->mac_hash1 |= hash_bit; 629 } else { 630 hash_bit = BIT((hash_value - 32)); 631 priv->mac_hash2 |= hash_bit; 632 } 633 } 634 635 /* incr counter for num of mcast addr's mapped to "this" hash bit */ 636 ++priv->multicast_hash_cnt[hash_value]; 637 638 return rc; 639 } 640 641 /** 642 * hash_del - Hash function to delete mac addr from hash table 643 * @priv: The DaVinci EMAC private adapter structure 644 * @mac_addr: mac address to delete from hash table 645 * 646 * Removes mac address from the internal hash table 647 * 648 */ 649 static int hash_del(struct emac_priv *priv, u8 *mac_addr) 650 { 651 u32 hash_value; 652 u32 hash_bit; 653 654 hash_value = hash_get(mac_addr); 655 if (priv->multicast_hash_cnt[hash_value] > 0) { 656 /* dec cntr for num of mcast addr's mapped to this hash bit */ 657 --priv->multicast_hash_cnt[hash_value]; 658 } 659 660 /* if counter still > 0, at least one multicast address refers 661 * to this hash bit. so return 0 */ 662 if (priv->multicast_hash_cnt[hash_value] > 0) 663 return 0; 664 665 if (hash_value < 32) { 666 hash_bit = BIT(hash_value); 667 priv->mac_hash1 &= ~hash_bit; 668 } else { 669 hash_bit = BIT((hash_value - 32)); 670 priv->mac_hash2 &= ~hash_bit; 671 } 672 673 /* return 1 to indicate change in mac_hash registers reqd */ 674 return 1; 675 } 676 677 /* EMAC multicast operation */ 678 #define EMAC_MULTICAST_ADD 0 679 #define EMAC_MULTICAST_DEL 1 680 #define EMAC_ALL_MULTI_SET 2 681 #define EMAC_ALL_MULTI_CLR 3 682 683 /** 684 * emac_add_mcast - Set multicast address in the EMAC adapter (Internal) 685 * @priv: The DaVinci EMAC private adapter structure 686 * @action: multicast operation to perform 687 * mac_addr: mac address to set 688 * 689 * Set multicast addresses in EMAC adapter - internal function 690 * 691 */ 692 static void emac_add_mcast(struct emac_priv *priv, u32 action, u8 *mac_addr) 693 { 694 struct device *emac_dev = &priv->ndev->dev; 695 int update = -1; 696 697 switch (action) { 698 case EMAC_MULTICAST_ADD: 699 update = hash_add(priv, mac_addr); 700 break; 701 case EMAC_MULTICAST_DEL: 702 update = hash_del(priv, mac_addr); 703 break; 704 case EMAC_ALL_MULTI_SET: 705 update = 1; 706 priv->mac_hash1 = EMAC_ALL_MULTI_REG_VALUE; 707 priv->mac_hash2 = EMAC_ALL_MULTI_REG_VALUE; 708 break; 709 case EMAC_ALL_MULTI_CLR: 710 update = 1; 711 priv->mac_hash1 = 0; 712 priv->mac_hash2 = 0; 713 memset(&(priv->multicast_hash_cnt[0]), 0, 714 sizeof(priv->multicast_hash_cnt[0]) * 715 EMAC_NUM_MULTICAST_BITS); 716 break; 717 default: 718 if (netif_msg_drv(priv)) 719 dev_err(emac_dev, "DaVinci EMAC: add_mcast"\ 720 ": bad operation %d", action); 721 break; 722 } 723 724 /* write to the hardware only if the register status chances */ 725 if (update > 0) { 726 emac_write(EMAC_MACHASH1, priv->mac_hash1); 727 emac_write(EMAC_MACHASH2, priv->mac_hash2); 728 } 729 } 730 731 /** 732 * emac_dev_mcast_set - Set multicast address in the EMAC adapter 733 * @ndev: The DaVinci EMAC network adapter 734 * 735 * Set multicast addresses in EMAC adapter 736 * 737 */ 738 static void emac_dev_mcast_set(struct net_device *ndev) 739 { 740 u32 mbp_enable; 741 struct emac_priv *priv = netdev_priv(ndev); 742 743 mbp_enable = emac_read(EMAC_RXMBPENABLE); 744 if (ndev->flags & IFF_PROMISC) { 745 mbp_enable &= (~EMAC_MBP_PROMISCCH(EMAC_DEF_PROM_CH)); 746 mbp_enable |= (EMAC_MBP_RXPROMISC); 747 } else { 748 mbp_enable = (mbp_enable & ~EMAC_MBP_RXPROMISC); 749 if ((ndev->flags & IFF_ALLMULTI) || 750 netdev_mc_count(ndev) > EMAC_DEF_MAX_MULTICAST_ADDRESSES) { 751 mbp_enable = (mbp_enable | EMAC_MBP_RXMCAST); 752 emac_add_mcast(priv, EMAC_ALL_MULTI_SET, NULL); 753 } else if (!netdev_mc_empty(ndev)) { 754 struct netdev_hw_addr *ha; 755 756 mbp_enable = (mbp_enable | EMAC_MBP_RXMCAST); 757 emac_add_mcast(priv, EMAC_ALL_MULTI_CLR, NULL); 758 /* program multicast address list into EMAC hardware */ 759 netdev_for_each_mc_addr(ha, ndev) { 760 emac_add_mcast(priv, EMAC_MULTICAST_ADD, 761 (u8 *) ha->addr); 762 } 763 } else { 764 mbp_enable = (mbp_enable & ~EMAC_MBP_RXMCAST); 765 emac_add_mcast(priv, EMAC_ALL_MULTI_CLR, NULL); 766 } 767 } 768 /* Set mbp config register */ 769 emac_write(EMAC_RXMBPENABLE, mbp_enable); 770 } 771 772 /************************************************************************* 773 * EMAC Hardware manipulation 774 *************************************************************************/ 775 776 /** 777 * emac_int_disable - Disable EMAC module interrupt (from adapter) 778 * @priv: The DaVinci EMAC private adapter structure 779 * 780 * Disable EMAC interrupt on the adapter 781 * 782 */ 783 static void emac_int_disable(struct emac_priv *priv) 784 { 785 if (priv->version == EMAC_VERSION_2) { 786 unsigned long flags; 787 788 local_irq_save(flags); 789 790 /* Program C0_Int_En to zero to turn off 791 * interrupts to the CPU */ 792 emac_ctrl_write(EMAC_DM646X_CMRXINTEN, 0x0); 793 emac_ctrl_write(EMAC_DM646X_CMTXINTEN, 0x0); 794 /* NOTE: Rx Threshold and Misc interrupts are not disabled */ 795 if (priv->int_disable) 796 priv->int_disable(); 797 798 /* NOTE: Rx Threshold and Misc interrupts are not enabled */ 799 800 /* ack rxen only then a new pulse will be generated */ 801 emac_write(EMAC_DM646X_MACEOIVECTOR, 802 EMAC_DM646X_MAC_EOI_C0_RXEN); 803 804 /* ack txen- only then a new pulse will be generated */ 805 emac_write(EMAC_DM646X_MACEOIVECTOR, 806 EMAC_DM646X_MAC_EOI_C0_TXEN); 807 808 local_irq_restore(flags); 809 810 } else { 811 /* Set DM644x control registers for interrupt control */ 812 emac_ctrl_write(EMAC_CTRL_EWCTL, 0x0); 813 } 814 } 815 816 /** 817 * emac_int_enable - Enable EMAC module interrupt (from adapter) 818 * @priv: The DaVinci EMAC private adapter structure 819 * 820 * Enable EMAC interrupt on the adapter 821 * 822 */ 823 static void emac_int_enable(struct emac_priv *priv) 824 { 825 if (priv->version == EMAC_VERSION_2) { 826 if (priv->int_enable) 827 priv->int_enable(); 828 829 emac_ctrl_write(EMAC_DM646X_CMRXINTEN, 0xff); 830 emac_ctrl_write(EMAC_DM646X_CMTXINTEN, 0xff); 831 832 /* In addition to turning on interrupt Enable, we need 833 * ack by writing appropriate values to the EOI 834 * register */ 835 836 /* NOTE: Rx Threshold and Misc interrupts are not enabled */ 837 } else { 838 /* Set DM644x control registers for interrupt control */ 839 emac_ctrl_write(EMAC_CTRL_EWCTL, 0x1); 840 } 841 } 842 843 /** 844 * emac_irq - EMAC interrupt handler 845 * @irq: interrupt number 846 * @dev_id: EMAC network adapter data structure ptr 847 * 848 * EMAC Interrupt handler - we only schedule NAPI and not process any packets 849 * here. EVen the interrupt status is checked (TX/RX/Err) in NAPI poll function 850 * 851 * Returns interrupt handled condition 852 */ 853 static irqreturn_t emac_irq(int irq, void *dev_id) 854 { 855 struct net_device *ndev = (struct net_device *)dev_id; 856 struct emac_priv *priv = netdev_priv(ndev); 857 858 ++priv->isr_count; 859 if (likely(netif_running(priv->ndev))) { 860 emac_int_disable(priv); 861 napi_schedule(&priv->napi); 862 } else { 863 /* we are closing down, so dont process anything */ 864 } 865 return IRQ_HANDLED; 866 } 867 868 static struct sk_buff *emac_rx_alloc(struct emac_priv *priv) 869 { 870 struct sk_buff *skb = netdev_alloc_skb(priv->ndev, priv->rx_buf_size); 871 if (WARN_ON(!skb)) 872 return NULL; 873 skb_reserve(skb, NET_IP_ALIGN); 874 return skb; 875 } 876 877 static void emac_rx_handler(void *token, int len, int status) 878 { 879 struct sk_buff *skb = token; 880 struct net_device *ndev = skb->dev; 881 struct emac_priv *priv = netdev_priv(ndev); 882 struct device *emac_dev = &ndev->dev; 883 int ret; 884 885 /* free and bail if we are shutting down */ 886 if (unlikely(!netif_running(ndev))) { 887 dev_kfree_skb_any(skb); 888 return; 889 } 890 891 /* recycle on receive error */ 892 if (status < 0) { 893 ndev->stats.rx_errors++; 894 goto recycle; 895 } 896 897 /* feed received packet up the stack */ 898 skb_put(skb, len); 899 skb->protocol = eth_type_trans(skb, ndev); 900 netif_receive_skb(skb); 901 ndev->stats.rx_bytes += len; 902 ndev->stats.rx_packets++; 903 904 /* alloc a new packet for receive */ 905 skb = emac_rx_alloc(priv); 906 if (!skb) { 907 if (netif_msg_rx_err(priv) && net_ratelimit()) 908 dev_err(emac_dev, "failed rx buffer alloc\n"); 909 return; 910 } 911 912 recycle: 913 ret = cpdma_chan_submit(priv->rxchan, skb, skb->data, 914 skb_tailroom(skb), 0); 915 916 WARN_ON(ret == -ENOMEM); 917 if (unlikely(ret < 0)) 918 dev_kfree_skb_any(skb); 919 } 920 921 static void emac_tx_handler(void *token, int len, int status) 922 { 923 struct sk_buff *skb = token; 924 struct net_device *ndev = skb->dev; 925 926 /* Check whether the queue is stopped due to stalled tx dma, if the 927 * queue is stopped then start the queue as we have free desc for tx 928 */ 929 if (unlikely(netif_queue_stopped(ndev))) 930 netif_wake_queue(ndev); 931 ndev->stats.tx_packets++; 932 ndev->stats.tx_bytes += len; 933 dev_kfree_skb_any(skb); 934 } 935 936 /** 937 * emac_dev_xmit - EMAC Transmit function 938 * @skb: SKB pointer 939 * @ndev: The DaVinci EMAC network adapter 940 * 941 * Called by the system to transmit a packet - we queue the packet in 942 * EMAC hardware transmit queue 943 * 944 * Returns success(NETDEV_TX_OK) or error code (typically out of desc's) 945 */ 946 static int emac_dev_xmit(struct sk_buff *skb, struct net_device *ndev) 947 { 948 struct device *emac_dev = &ndev->dev; 949 int ret_code; 950 struct emac_priv *priv = netdev_priv(ndev); 951 952 /* If no link, return */ 953 if (unlikely(!priv->link)) { 954 if (netif_msg_tx_err(priv) && net_ratelimit()) 955 dev_err(emac_dev, "DaVinci EMAC: No link to transmit"); 956 goto fail_tx; 957 } 958 959 ret_code = skb_padto(skb, EMAC_DEF_MIN_ETHPKTSIZE); 960 if (unlikely(ret_code < 0)) { 961 if (netif_msg_tx_err(priv) && net_ratelimit()) 962 dev_err(emac_dev, "DaVinci EMAC: packet pad failed"); 963 goto fail_tx; 964 } 965 966 skb_tx_timestamp(skb); 967 968 ret_code = cpdma_chan_submit(priv->txchan, skb, skb->data, skb->len, 969 0); 970 if (unlikely(ret_code != 0)) { 971 if (netif_msg_tx_err(priv) && net_ratelimit()) 972 dev_err(emac_dev, "DaVinci EMAC: desc submit failed"); 973 goto fail_tx; 974 } 975 976 /* If there is no more tx desc left free then we need to 977 * tell the kernel to stop sending us tx frames. 978 */ 979 if (unlikely(!cpdma_check_free_tx_desc(priv->txchan))) 980 netif_stop_queue(ndev); 981 982 return NETDEV_TX_OK; 983 984 fail_tx: 985 ndev->stats.tx_dropped++; 986 netif_stop_queue(ndev); 987 return NETDEV_TX_BUSY; 988 } 989 990 /** 991 * emac_dev_tx_timeout - EMAC Transmit timeout function 992 * @ndev: The DaVinci EMAC network adapter 993 * 994 * Called when system detects that a skb timeout period has expired 995 * potentially due to a fault in the adapter in not being able to send 996 * it out on the wire. We teardown the TX channel assuming a hardware 997 * error and re-initialize the TX channel for hardware operation 998 * 999 */ 1000 static void emac_dev_tx_timeout(struct net_device *ndev) 1001 { 1002 struct emac_priv *priv = netdev_priv(ndev); 1003 struct device *emac_dev = &ndev->dev; 1004 1005 if (netif_msg_tx_err(priv)) 1006 dev_err(emac_dev, "DaVinci EMAC: xmit timeout, restarting TX"); 1007 1008 ndev->stats.tx_errors++; 1009 emac_int_disable(priv); 1010 cpdma_chan_stop(priv->txchan); 1011 cpdma_chan_start(priv->txchan); 1012 emac_int_enable(priv); 1013 } 1014 1015 /** 1016 * emac_set_type0addr - Set EMAC Type0 mac address 1017 * @priv: The DaVinci EMAC private adapter structure 1018 * @ch: RX channel number 1019 * @mac_addr: MAC address to set in device 1020 * 1021 * Called internally to set Type0 mac address of the adapter (Device) 1022 * 1023 * Returns success (0) or appropriate error code (none as of now) 1024 */ 1025 static void emac_set_type0addr(struct emac_priv *priv, u32 ch, char *mac_addr) 1026 { 1027 u32 val; 1028 val = ((mac_addr[5] << 8) | (mac_addr[4])); 1029 emac_write(EMAC_MACSRCADDRLO, val); 1030 1031 val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \ 1032 (mac_addr[1] << 8) | (mac_addr[0])); 1033 emac_write(EMAC_MACSRCADDRHI, val); 1034 val = emac_read(EMAC_RXUNICASTSET); 1035 val |= BIT(ch); 1036 emac_write(EMAC_RXUNICASTSET, val); 1037 val = emac_read(EMAC_RXUNICASTCLEAR); 1038 val &= ~BIT(ch); 1039 emac_write(EMAC_RXUNICASTCLEAR, val); 1040 } 1041 1042 /** 1043 * emac_set_type1addr - Set EMAC Type1 mac address 1044 * @priv: The DaVinci EMAC private adapter structure 1045 * @ch: RX channel number 1046 * @mac_addr: MAC address to set in device 1047 * 1048 * Called internally to set Type1 mac address of the adapter (Device) 1049 * 1050 * Returns success (0) or appropriate error code (none as of now) 1051 */ 1052 static void emac_set_type1addr(struct emac_priv *priv, u32 ch, char *mac_addr) 1053 { 1054 u32 val; 1055 emac_write(EMAC_MACINDEX, ch); 1056 val = ((mac_addr[5] << 8) | mac_addr[4]); 1057 emac_write(EMAC_MACADDRLO, val); 1058 val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \ 1059 (mac_addr[1] << 8) | (mac_addr[0])); 1060 emac_write(EMAC_MACADDRHI, val); 1061 emac_set_type0addr(priv, ch, mac_addr); 1062 } 1063 1064 /** 1065 * emac_set_type2addr - Set EMAC Type2 mac address 1066 * @priv: The DaVinci EMAC private adapter structure 1067 * @ch: RX channel number 1068 * @mac_addr: MAC address to set in device 1069 * @index: index into RX address entries 1070 * @match: match parameter for RX address matching logic 1071 * 1072 * Called internally to set Type2 mac address of the adapter (Device) 1073 * 1074 * Returns success (0) or appropriate error code (none as of now) 1075 */ 1076 static void emac_set_type2addr(struct emac_priv *priv, u32 ch, 1077 char *mac_addr, int index, int match) 1078 { 1079 u32 val; 1080 emac_write(EMAC_MACINDEX, index); 1081 val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \ 1082 (mac_addr[1] << 8) | (mac_addr[0])); 1083 emac_write(EMAC_MACADDRHI, val); 1084 val = ((mac_addr[5] << 8) | mac_addr[4] | ((ch & 0x7) << 16) | \ 1085 (match << 19) | BIT(20)); 1086 emac_write(EMAC_MACADDRLO, val); 1087 emac_set_type0addr(priv, ch, mac_addr); 1088 } 1089 1090 /** 1091 * emac_setmac - Set mac address in the adapter (internal function) 1092 * @priv: The DaVinci EMAC private adapter structure 1093 * @ch: RX channel number 1094 * @mac_addr: MAC address to set in device 1095 * 1096 * Called internally to set the mac address of the adapter (Device) 1097 * 1098 * Returns success (0) or appropriate error code (none as of now) 1099 */ 1100 static void emac_setmac(struct emac_priv *priv, u32 ch, char *mac_addr) 1101 { 1102 struct device *emac_dev = &priv->ndev->dev; 1103 1104 if (priv->rx_addr_type == 0) { 1105 emac_set_type0addr(priv, ch, mac_addr); 1106 } else if (priv->rx_addr_type == 1) { 1107 u32 cnt; 1108 for (cnt = 0; cnt < EMAC_MAX_TXRX_CHANNELS; cnt++) 1109 emac_set_type1addr(priv, ch, mac_addr); 1110 } else if (priv->rx_addr_type == 2) { 1111 emac_set_type2addr(priv, ch, mac_addr, ch, 1); 1112 emac_set_type0addr(priv, ch, mac_addr); 1113 } else { 1114 if (netif_msg_drv(priv)) 1115 dev_err(emac_dev, "DaVinci EMAC: Wrong addressing\n"); 1116 } 1117 } 1118 1119 /** 1120 * emac_dev_setmac_addr - Set mac address in the adapter 1121 * @ndev: The DaVinci EMAC network adapter 1122 * @addr: MAC address to set in device 1123 * 1124 * Called by the system to set the mac address of the adapter (Device) 1125 * 1126 * Returns success (0) or appropriate error code (none as of now) 1127 */ 1128 static int emac_dev_setmac_addr(struct net_device *ndev, void *addr) 1129 { 1130 struct emac_priv *priv = netdev_priv(ndev); 1131 struct device *emac_dev = &priv->ndev->dev; 1132 struct sockaddr *sa = addr; 1133 1134 if (!is_valid_ether_addr(sa->sa_data)) 1135 return -EADDRNOTAVAIL; 1136 1137 /* Store mac addr in priv and rx channel and set it in EMAC hw */ 1138 memcpy(priv->mac_addr, sa->sa_data, ndev->addr_len); 1139 memcpy(ndev->dev_addr, sa->sa_data, ndev->addr_len); 1140 1141 /* MAC address is configured only after the interface is enabled. */ 1142 if (netif_running(ndev)) { 1143 emac_setmac(priv, EMAC_DEF_RX_CH, priv->mac_addr); 1144 } 1145 1146 if (netif_msg_drv(priv)) 1147 dev_notice(emac_dev, "DaVinci EMAC: emac_dev_setmac_addr %pM\n", 1148 priv->mac_addr); 1149 1150 return 0; 1151 } 1152 1153 /** 1154 * emac_hw_enable - Enable EMAC hardware for packet transmission/reception 1155 * @priv: The DaVinci EMAC private adapter structure 1156 * 1157 * Enables EMAC hardware for packet processing - enables PHY, enables RX 1158 * for packet reception and enables device interrupts and then NAPI 1159 * 1160 * Returns success (0) or appropriate error code (none right now) 1161 */ 1162 static int emac_hw_enable(struct emac_priv *priv) 1163 { 1164 u32 val, mbp_enable, mac_control; 1165 1166 /* Soft reset */ 1167 emac_write(EMAC_SOFTRESET, 1); 1168 while (emac_read(EMAC_SOFTRESET)) 1169 cpu_relax(); 1170 1171 /* Disable interrupt & Set pacing for more interrupts initially */ 1172 emac_int_disable(priv); 1173 1174 /* Full duplex enable bit set when auto negotiation happens */ 1175 mac_control = 1176 (((EMAC_DEF_TXPRIO_FIXED) ? (EMAC_MACCONTROL_TXPTYPE) : 0x0) | 1177 ((priv->speed == 1000) ? EMAC_MACCONTROL_GIGABITEN : 0x0) | 1178 ((EMAC_DEF_TXPACING_EN) ? (EMAC_MACCONTROL_TXPACEEN) : 0x0) | 1179 ((priv->duplex == DUPLEX_FULL) ? 0x1 : 0)); 1180 emac_write(EMAC_MACCONTROL, mac_control); 1181 1182 mbp_enable = 1183 (((EMAC_DEF_PASS_CRC) ? (EMAC_RXMBP_PASSCRC_MASK) : 0x0) | 1184 ((EMAC_DEF_QOS_EN) ? (EMAC_RXMBP_QOSEN_MASK) : 0x0) | 1185 ((EMAC_DEF_NO_BUFF_CHAIN) ? (EMAC_RXMBP_NOCHAIN_MASK) : 0x0) | 1186 ((EMAC_DEF_MACCTRL_FRAME_EN) ? (EMAC_RXMBP_CMFEN_MASK) : 0x0) | 1187 ((EMAC_DEF_SHORT_FRAME_EN) ? (EMAC_RXMBP_CSFEN_MASK) : 0x0) | 1188 ((EMAC_DEF_ERROR_FRAME_EN) ? (EMAC_RXMBP_CEFEN_MASK) : 0x0) | 1189 ((EMAC_DEF_PROM_EN) ? (EMAC_RXMBP_CAFEN_MASK) : 0x0) | 1190 ((EMAC_DEF_PROM_CH & EMAC_RXMBP_CHMASK) << \ 1191 EMAC_RXMBP_PROMCH_SHIFT) | 1192 ((EMAC_DEF_BCAST_EN) ? (EMAC_RXMBP_BROADEN_MASK) : 0x0) | 1193 ((EMAC_DEF_BCAST_CH & EMAC_RXMBP_CHMASK) << \ 1194 EMAC_RXMBP_BROADCH_SHIFT) | 1195 ((EMAC_DEF_MCAST_EN) ? (EMAC_RXMBP_MULTIEN_MASK) : 0x0) | 1196 ((EMAC_DEF_MCAST_CH & EMAC_RXMBP_CHMASK) << \ 1197 EMAC_RXMBP_MULTICH_SHIFT)); 1198 emac_write(EMAC_RXMBPENABLE, mbp_enable); 1199 emac_write(EMAC_RXMAXLEN, (EMAC_DEF_MAX_FRAME_SIZE & 1200 EMAC_RX_MAX_LEN_MASK)); 1201 emac_write(EMAC_RXBUFFEROFFSET, (EMAC_DEF_BUFFER_OFFSET & 1202 EMAC_RX_BUFFER_OFFSET_MASK)); 1203 emac_write(EMAC_RXFILTERLOWTHRESH, 0); 1204 emac_write(EMAC_RXUNICASTCLEAR, EMAC_RX_UNICAST_CLEAR_ALL); 1205 priv->rx_addr_type = (emac_read(EMAC_MACCONFIG) >> 8) & 0xFF; 1206 1207 emac_write(EMAC_MACINTMASKSET, EMAC_MAC_HOST_ERR_INTMASK_VAL); 1208 1209 emac_setmac(priv, EMAC_DEF_RX_CH, priv->mac_addr); 1210 1211 /* Enable MII */ 1212 val = emac_read(EMAC_MACCONTROL); 1213 val |= (EMAC_MACCONTROL_GMIIEN); 1214 emac_write(EMAC_MACCONTROL, val); 1215 1216 /* Enable NAPI and interrupts */ 1217 napi_enable(&priv->napi); 1218 emac_int_enable(priv); 1219 return 0; 1220 1221 } 1222 1223 /** 1224 * emac_poll - EMAC NAPI Poll function 1225 * @ndev: The DaVinci EMAC network adapter 1226 * @budget: Number of receive packets to process (as told by NAPI layer) 1227 * 1228 * NAPI Poll function implemented to process packets as per budget. We check 1229 * the type of interrupt on the device and accordingly call the TX or RX 1230 * packet processing functions. We follow the budget for RX processing and 1231 * also put a cap on number of TX pkts processed through config param. The 1232 * NAPI schedule function is called if more packets pending. 1233 * 1234 * Returns number of packets received (in most cases; else TX pkts - rarely) 1235 */ 1236 static int emac_poll(struct napi_struct *napi, int budget) 1237 { 1238 unsigned int mask; 1239 struct emac_priv *priv = container_of(napi, struct emac_priv, napi); 1240 struct net_device *ndev = priv->ndev; 1241 struct device *emac_dev = &ndev->dev; 1242 u32 status = 0; 1243 u32 num_tx_pkts = 0, num_rx_pkts = 0; 1244 1245 /* Check interrupt vectors and call packet processing */ 1246 status = emac_read(EMAC_MACINVECTOR); 1247 1248 mask = EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC; 1249 1250 if (priv->version == EMAC_VERSION_2) 1251 mask = EMAC_DM646X_MAC_IN_VECTOR_TX_INT_VEC; 1252 1253 if (status & mask) { 1254 num_tx_pkts = cpdma_chan_process(priv->txchan, 1255 EMAC_DEF_TX_MAX_SERVICE); 1256 } /* TX processing */ 1257 1258 mask = EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC; 1259 1260 if (priv->version == EMAC_VERSION_2) 1261 mask = EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC; 1262 1263 if (status & mask) { 1264 num_rx_pkts = cpdma_chan_process(priv->rxchan, budget); 1265 } /* RX processing */ 1266 1267 mask = EMAC_DM644X_MAC_IN_VECTOR_HOST_INT; 1268 if (priv->version == EMAC_VERSION_2) 1269 mask = EMAC_DM646X_MAC_IN_VECTOR_HOST_INT; 1270 1271 if (unlikely(status & mask)) { 1272 u32 ch, cause; 1273 dev_err(emac_dev, "DaVinci EMAC: Fatal Hardware Error\n"); 1274 netif_stop_queue(ndev); 1275 napi_disable(&priv->napi); 1276 1277 status = emac_read(EMAC_MACSTATUS); 1278 cause = ((status & EMAC_MACSTATUS_TXERRCODE_MASK) >> 1279 EMAC_MACSTATUS_TXERRCODE_SHIFT); 1280 if (cause) { 1281 ch = ((status & EMAC_MACSTATUS_TXERRCH_MASK) >> 1282 EMAC_MACSTATUS_TXERRCH_SHIFT); 1283 if (net_ratelimit()) { 1284 dev_err(emac_dev, "TX Host error %s on ch=%d\n", 1285 &emac_txhost_errcodes[cause][0], ch); 1286 } 1287 } 1288 cause = ((status & EMAC_MACSTATUS_RXERRCODE_MASK) >> 1289 EMAC_MACSTATUS_RXERRCODE_SHIFT); 1290 if (cause) { 1291 ch = ((status & EMAC_MACSTATUS_RXERRCH_MASK) >> 1292 EMAC_MACSTATUS_RXERRCH_SHIFT); 1293 if (netif_msg_hw(priv) && net_ratelimit()) 1294 dev_err(emac_dev, "RX Host error %s on ch=%d\n", 1295 &emac_rxhost_errcodes[cause][0], ch); 1296 } 1297 } else if (num_rx_pkts < budget) { 1298 napi_complete(napi); 1299 emac_int_enable(priv); 1300 } 1301 1302 return num_rx_pkts; 1303 } 1304 1305 #ifdef CONFIG_NET_POLL_CONTROLLER 1306 /** 1307 * emac_poll_controller - EMAC Poll controller function 1308 * @ndev: The DaVinci EMAC network adapter 1309 * 1310 * Polled functionality used by netconsole and others in non interrupt mode 1311 * 1312 */ 1313 static void emac_poll_controller(struct net_device *ndev) 1314 { 1315 struct emac_priv *priv = netdev_priv(ndev); 1316 1317 emac_int_disable(priv); 1318 emac_irq(ndev->irq, ndev); 1319 emac_int_enable(priv); 1320 } 1321 #endif 1322 1323 static void emac_adjust_link(struct net_device *ndev) 1324 { 1325 struct emac_priv *priv = netdev_priv(ndev); 1326 struct phy_device *phydev = ndev->phydev; 1327 unsigned long flags; 1328 int new_state = 0; 1329 1330 spin_lock_irqsave(&priv->lock, flags); 1331 1332 if (phydev->link) { 1333 /* check the mode of operation - full/half duplex */ 1334 if (phydev->duplex != priv->duplex) { 1335 new_state = 1; 1336 priv->duplex = phydev->duplex; 1337 } 1338 if (phydev->speed != priv->speed) { 1339 new_state = 1; 1340 priv->speed = phydev->speed; 1341 } 1342 if (!priv->link) { 1343 new_state = 1; 1344 priv->link = 1; 1345 } 1346 1347 } else if (priv->link) { 1348 new_state = 1; 1349 priv->link = 0; 1350 priv->speed = 0; 1351 priv->duplex = ~0; 1352 } 1353 if (new_state) { 1354 emac_update_phystatus(priv); 1355 phy_print_status(ndev->phydev); 1356 } 1357 1358 spin_unlock_irqrestore(&priv->lock, flags); 1359 } 1360 1361 /************************************************************************* 1362 * Linux Driver Model 1363 *************************************************************************/ 1364 1365 /** 1366 * emac_devioctl - EMAC adapter ioctl 1367 * @ndev: The DaVinci EMAC network adapter 1368 * @ifrq: request parameter 1369 * @cmd: command parameter 1370 * 1371 * EMAC driver ioctl function 1372 * 1373 * Returns success(0) or appropriate error code 1374 */ 1375 static int emac_devioctl(struct net_device *ndev, struct ifreq *ifrq, int cmd) 1376 { 1377 if (!(netif_running(ndev))) 1378 return -EINVAL; 1379 1380 /* TODO: Add phy read and write and private statistics get feature */ 1381 1382 if (ndev->phydev) 1383 return phy_mii_ioctl(ndev->phydev, ifrq, cmd); 1384 else 1385 return -EOPNOTSUPP; 1386 } 1387 1388 static int match_first_device(struct device *dev, void *data) 1389 { 1390 return !strncmp(dev_name(dev), "davinci_mdio", 12); 1391 } 1392 1393 /** 1394 * emac_dev_open - EMAC device open 1395 * @ndev: The DaVinci EMAC network adapter 1396 * 1397 * Called when system wants to start the interface. We init TX/RX channels 1398 * and enable the hardware for packet reception/transmission and start the 1399 * network queue. 1400 * 1401 * Returns 0 for a successful open, or appropriate error code 1402 */ 1403 static int emac_dev_open(struct net_device *ndev) 1404 { 1405 struct device *emac_dev = &ndev->dev; 1406 u32 cnt; 1407 struct resource *res; 1408 int q, m, ret; 1409 int res_num = 0, irq_num = 0; 1410 int i = 0; 1411 struct emac_priv *priv = netdev_priv(ndev); 1412 struct phy_device *phydev = NULL; 1413 1414 ret = pm_runtime_get_sync(&priv->pdev->dev); 1415 if (ret < 0) { 1416 pm_runtime_put_noidle(&priv->pdev->dev); 1417 dev_err(&priv->pdev->dev, "%s: failed to get_sync(%d)\n", 1418 __func__, ret); 1419 return ret; 1420 } 1421 1422 netif_carrier_off(ndev); 1423 for (cnt = 0; cnt < ETH_ALEN; cnt++) 1424 ndev->dev_addr[cnt] = priv->mac_addr[cnt]; 1425 1426 /* Configuration items */ 1427 priv->rx_buf_size = EMAC_DEF_MAX_FRAME_SIZE + NET_IP_ALIGN; 1428 1429 priv->mac_hash1 = 0; 1430 priv->mac_hash2 = 0; 1431 emac_write(EMAC_MACHASH1, 0); 1432 emac_write(EMAC_MACHASH2, 0); 1433 1434 for (i = 0; i < EMAC_DEF_RX_NUM_DESC; i++) { 1435 struct sk_buff *skb = emac_rx_alloc(priv); 1436 1437 if (!skb) 1438 break; 1439 1440 ret = cpdma_chan_submit(priv->rxchan, skb, skb->data, 1441 skb_tailroom(skb), 0); 1442 if (WARN_ON(ret < 0)) 1443 break; 1444 } 1445 1446 /* Request IRQ */ 1447 while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, 1448 res_num))) { 1449 for (irq_num = res->start; irq_num <= res->end; irq_num++) { 1450 if (request_irq(irq_num, emac_irq, 0, ndev->name, 1451 ndev)) { 1452 dev_err(emac_dev, 1453 "DaVinci EMAC: request_irq() failed\n"); 1454 ret = -EBUSY; 1455 1456 goto rollback; 1457 } 1458 } 1459 res_num++; 1460 } 1461 /* prepare counters for rollback in case of an error */ 1462 res_num--; 1463 irq_num--; 1464 1465 /* Start/Enable EMAC hardware */ 1466 emac_hw_enable(priv); 1467 1468 /* Enable Interrupt pacing if configured */ 1469 if (priv->coal_intvl != 0) { 1470 struct ethtool_coalesce coal; 1471 1472 coal.rx_coalesce_usecs = (priv->coal_intvl << 4); 1473 emac_set_coalesce(ndev, &coal); 1474 } 1475 1476 cpdma_ctlr_start(priv->dma); 1477 1478 if (priv->phy_node) { 1479 phydev = of_phy_connect(ndev, priv->phy_node, 1480 &emac_adjust_link, 0, 0); 1481 if (!phydev) { 1482 dev_err(emac_dev, "could not connect to phy %s\n", 1483 priv->phy_node->full_name); 1484 ret = -ENODEV; 1485 goto err; 1486 } 1487 } 1488 1489 /* use the first phy on the bus if pdata did not give us a phy id */ 1490 if (!phydev && !priv->phy_id) { 1491 struct device *phy; 1492 1493 phy = bus_find_device(&mdio_bus_type, NULL, NULL, 1494 match_first_device); 1495 if (phy) 1496 priv->phy_id = dev_name(phy); 1497 } 1498 1499 if (!phydev && priv->phy_id && *priv->phy_id) { 1500 phydev = phy_connect(ndev, priv->phy_id, 1501 &emac_adjust_link, 1502 PHY_INTERFACE_MODE_MII); 1503 1504 if (IS_ERR(phydev)) { 1505 dev_err(emac_dev, "could not connect to phy %s\n", 1506 priv->phy_id); 1507 ret = PTR_ERR(phydev); 1508 goto err; 1509 } 1510 1511 priv->link = 0; 1512 priv->speed = 0; 1513 priv->duplex = ~0; 1514 1515 phy_attached_info(phydev); 1516 } 1517 1518 if (!phydev) { 1519 /* No PHY , fix the link, speed and duplex settings */ 1520 dev_notice(emac_dev, "no phy, defaulting to 100/full\n"); 1521 priv->link = 1; 1522 priv->speed = SPEED_100; 1523 priv->duplex = DUPLEX_FULL; 1524 emac_update_phystatus(priv); 1525 } 1526 1527 if (netif_msg_drv(priv)) 1528 dev_notice(emac_dev, "DaVinci EMAC: Opened %s\n", ndev->name); 1529 1530 if (phydev) 1531 phy_start(phydev); 1532 1533 return 0; 1534 1535 err: 1536 emac_int_disable(priv); 1537 napi_disable(&priv->napi); 1538 1539 rollback: 1540 for (q = res_num; q >= 0; q--) { 1541 res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, q); 1542 /* at the first iteration, irq_num is already set to the 1543 * right value 1544 */ 1545 if (q != res_num) 1546 irq_num = res->end; 1547 1548 for (m = irq_num; m >= res->start; m--) 1549 free_irq(m, ndev); 1550 } 1551 cpdma_ctlr_stop(priv->dma); 1552 pm_runtime_put(&priv->pdev->dev); 1553 return ret; 1554 } 1555 1556 /** 1557 * emac_dev_stop - EMAC device stop 1558 * @ndev: The DaVinci EMAC network adapter 1559 * 1560 * Called when system wants to stop or down the interface. We stop the network 1561 * queue, disable interrupts and cleanup TX/RX channels. 1562 * 1563 * We return the statistics in net_device_stats structure pulled from emac 1564 */ 1565 static int emac_dev_stop(struct net_device *ndev) 1566 { 1567 struct resource *res; 1568 int i = 0; 1569 int irq_num; 1570 struct emac_priv *priv = netdev_priv(ndev); 1571 struct device *emac_dev = &ndev->dev; 1572 1573 /* inform the upper layers. */ 1574 netif_stop_queue(ndev); 1575 napi_disable(&priv->napi); 1576 1577 netif_carrier_off(ndev); 1578 emac_int_disable(priv); 1579 cpdma_ctlr_stop(priv->dma); 1580 emac_write(EMAC_SOFTRESET, 1); 1581 1582 if (ndev->phydev) 1583 phy_disconnect(ndev->phydev); 1584 1585 /* Free IRQ */ 1586 while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, i))) { 1587 for (irq_num = res->start; irq_num <= res->end; irq_num++) 1588 free_irq(irq_num, priv->ndev); 1589 i++; 1590 } 1591 1592 if (netif_msg_drv(priv)) 1593 dev_notice(emac_dev, "DaVinci EMAC: %s stopped\n", ndev->name); 1594 1595 pm_runtime_put(&priv->pdev->dev); 1596 return 0; 1597 } 1598 1599 /** 1600 * emac_dev_getnetstats - EMAC get statistics function 1601 * @ndev: The DaVinci EMAC network adapter 1602 * 1603 * Called when system wants to get statistics from the device. 1604 * 1605 * We return the statistics in net_device_stats structure pulled from emac 1606 */ 1607 static struct net_device_stats *emac_dev_getnetstats(struct net_device *ndev) 1608 { 1609 struct emac_priv *priv = netdev_priv(ndev); 1610 u32 mac_control; 1611 u32 stats_clear_mask; 1612 int err; 1613 1614 err = pm_runtime_get_sync(&priv->pdev->dev); 1615 if (err < 0) { 1616 pm_runtime_put_noidle(&priv->pdev->dev); 1617 dev_err(&priv->pdev->dev, "%s: failed to get_sync(%d)\n", 1618 __func__, err); 1619 return &ndev->stats; 1620 } 1621 1622 /* update emac hardware stats and reset the registers*/ 1623 1624 mac_control = emac_read(EMAC_MACCONTROL); 1625 1626 if (mac_control & EMAC_MACCONTROL_GMIIEN) 1627 stats_clear_mask = EMAC_STATS_CLR_MASK; 1628 else 1629 stats_clear_mask = 0; 1630 1631 ndev->stats.multicast += emac_read(EMAC_RXMCASTFRAMES); 1632 emac_write(EMAC_RXMCASTFRAMES, stats_clear_mask); 1633 1634 ndev->stats.collisions += (emac_read(EMAC_TXCOLLISION) + 1635 emac_read(EMAC_TXSINGLECOLL) + 1636 emac_read(EMAC_TXMULTICOLL)); 1637 emac_write(EMAC_TXCOLLISION, stats_clear_mask); 1638 emac_write(EMAC_TXSINGLECOLL, stats_clear_mask); 1639 emac_write(EMAC_TXMULTICOLL, stats_clear_mask); 1640 1641 ndev->stats.rx_length_errors += (emac_read(EMAC_RXOVERSIZED) + 1642 emac_read(EMAC_RXJABBER) + 1643 emac_read(EMAC_RXUNDERSIZED)); 1644 emac_write(EMAC_RXOVERSIZED, stats_clear_mask); 1645 emac_write(EMAC_RXJABBER, stats_clear_mask); 1646 emac_write(EMAC_RXUNDERSIZED, stats_clear_mask); 1647 1648 ndev->stats.rx_over_errors += (emac_read(EMAC_RXSOFOVERRUNS) + 1649 emac_read(EMAC_RXMOFOVERRUNS)); 1650 emac_write(EMAC_RXSOFOVERRUNS, stats_clear_mask); 1651 emac_write(EMAC_RXMOFOVERRUNS, stats_clear_mask); 1652 1653 ndev->stats.rx_fifo_errors += emac_read(EMAC_RXDMAOVERRUNS); 1654 emac_write(EMAC_RXDMAOVERRUNS, stats_clear_mask); 1655 1656 ndev->stats.tx_carrier_errors += 1657 emac_read(EMAC_TXCARRIERSENSE); 1658 emac_write(EMAC_TXCARRIERSENSE, stats_clear_mask); 1659 1660 ndev->stats.tx_fifo_errors += emac_read(EMAC_TXUNDERRUN); 1661 emac_write(EMAC_TXUNDERRUN, stats_clear_mask); 1662 1663 pm_runtime_put(&priv->pdev->dev); 1664 1665 return &ndev->stats; 1666 } 1667 1668 static const struct net_device_ops emac_netdev_ops = { 1669 .ndo_open = emac_dev_open, 1670 .ndo_stop = emac_dev_stop, 1671 .ndo_start_xmit = emac_dev_xmit, 1672 .ndo_set_rx_mode = emac_dev_mcast_set, 1673 .ndo_set_mac_address = emac_dev_setmac_addr, 1674 .ndo_do_ioctl = emac_devioctl, 1675 .ndo_tx_timeout = emac_dev_tx_timeout, 1676 .ndo_get_stats = emac_dev_getnetstats, 1677 #ifdef CONFIG_NET_POLL_CONTROLLER 1678 .ndo_poll_controller = emac_poll_controller, 1679 #endif 1680 }; 1681 1682 static const struct of_device_id davinci_emac_of_match[]; 1683 1684 static struct emac_platform_data * 1685 davinci_emac_of_get_pdata(struct platform_device *pdev, struct emac_priv *priv) 1686 { 1687 struct device_node *np; 1688 const struct of_device_id *match; 1689 const struct emac_platform_data *auxdata; 1690 struct emac_platform_data *pdata = NULL; 1691 const u8 *mac_addr; 1692 1693 if (!IS_ENABLED(CONFIG_OF) || !pdev->dev.of_node) 1694 return dev_get_platdata(&pdev->dev); 1695 1696 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); 1697 if (!pdata) 1698 return NULL; 1699 1700 np = pdev->dev.of_node; 1701 pdata->version = EMAC_VERSION_2; 1702 1703 if (!is_valid_ether_addr(pdata->mac_addr)) { 1704 mac_addr = of_get_mac_address(np); 1705 if (mac_addr) 1706 ether_addr_copy(pdata->mac_addr, mac_addr); 1707 } 1708 1709 of_property_read_u32(np, "ti,davinci-ctrl-reg-offset", 1710 &pdata->ctrl_reg_offset); 1711 1712 of_property_read_u32(np, "ti,davinci-ctrl-mod-reg-offset", 1713 &pdata->ctrl_mod_reg_offset); 1714 1715 of_property_read_u32(np, "ti,davinci-ctrl-ram-offset", 1716 &pdata->ctrl_ram_offset); 1717 1718 of_property_read_u32(np, "ti,davinci-ctrl-ram-size", 1719 &pdata->ctrl_ram_size); 1720 1721 of_property_read_u8(np, "ti,davinci-rmii-en", &pdata->rmii_en); 1722 1723 pdata->no_bd_ram = of_property_read_bool(np, "ti,davinci-no-bd-ram"); 1724 1725 priv->phy_node = of_parse_phandle(np, "phy-handle", 0); 1726 if (!priv->phy_node) { 1727 if (!of_phy_is_fixed_link(np)) 1728 pdata->phy_id = NULL; 1729 else if (of_phy_register_fixed_link(np) >= 0) 1730 priv->phy_node = of_node_get(np); 1731 } 1732 1733 auxdata = pdev->dev.platform_data; 1734 if (auxdata) { 1735 pdata->interrupt_enable = auxdata->interrupt_enable; 1736 pdata->interrupt_disable = auxdata->interrupt_disable; 1737 } 1738 1739 match = of_match_device(davinci_emac_of_match, &pdev->dev); 1740 if (match && match->data) { 1741 auxdata = match->data; 1742 pdata->version = auxdata->version; 1743 pdata->hw_ram_addr = auxdata->hw_ram_addr; 1744 } 1745 1746 return pdata; 1747 } 1748 1749 static int davinci_emac_try_get_mac(struct platform_device *pdev, 1750 int instance, u8 *mac_addr) 1751 { 1752 if (!pdev->dev.of_node) 1753 return -EINVAL; 1754 1755 return ti_cm_get_macid(&pdev->dev, instance, mac_addr); 1756 } 1757 1758 /** 1759 * davinci_emac_probe - EMAC device probe 1760 * @pdev: The DaVinci EMAC device that we are removing 1761 * 1762 * Called when probing for emac devicesr. We get details of instances and 1763 * resource information from platform init and register a network device 1764 * and allocate resources necessary for driver to perform 1765 */ 1766 static int davinci_emac_probe(struct platform_device *pdev) 1767 { 1768 int rc = 0; 1769 struct resource *res, *res_ctrl; 1770 struct net_device *ndev; 1771 struct emac_priv *priv; 1772 unsigned long hw_ram_addr; 1773 struct emac_platform_data *pdata; 1774 struct cpdma_params dma_params; 1775 struct clk *emac_clk; 1776 unsigned long emac_bus_frequency; 1777 1778 1779 /* obtain emac clock from kernel */ 1780 emac_clk = devm_clk_get(&pdev->dev, NULL); 1781 if (IS_ERR(emac_clk)) { 1782 dev_err(&pdev->dev, "failed to get EMAC clock\n"); 1783 return -EBUSY; 1784 } 1785 emac_bus_frequency = clk_get_rate(emac_clk); 1786 devm_clk_put(&pdev->dev, emac_clk); 1787 1788 /* TODO: Probe PHY here if possible */ 1789 1790 ndev = alloc_etherdev(sizeof(struct emac_priv)); 1791 if (!ndev) 1792 return -ENOMEM; 1793 1794 platform_set_drvdata(pdev, ndev); 1795 priv = netdev_priv(ndev); 1796 priv->pdev = pdev; 1797 priv->ndev = ndev; 1798 priv->msg_enable = netif_msg_init(debug_level, DAVINCI_EMAC_DEBUG); 1799 1800 spin_lock_init(&priv->lock); 1801 1802 pdata = davinci_emac_of_get_pdata(pdev, priv); 1803 if (!pdata) { 1804 dev_err(&pdev->dev, "no platform data\n"); 1805 rc = -ENODEV; 1806 goto no_pdata; 1807 } 1808 1809 /* MAC addr and PHY mask , RMII enable info from platform_data */ 1810 memcpy(priv->mac_addr, pdata->mac_addr, ETH_ALEN); 1811 priv->phy_id = pdata->phy_id; 1812 priv->rmii_en = pdata->rmii_en; 1813 priv->version = pdata->version; 1814 priv->int_enable = pdata->interrupt_enable; 1815 priv->int_disable = pdata->interrupt_disable; 1816 1817 priv->coal_intvl = 0; 1818 priv->bus_freq_mhz = (u32)(emac_bus_frequency / 1000000); 1819 1820 /* Get EMAC platform data */ 1821 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 1822 priv->emac_base_phys = res->start + pdata->ctrl_reg_offset; 1823 priv->remap_addr = devm_ioremap_resource(&pdev->dev, res); 1824 if (IS_ERR(priv->remap_addr)) { 1825 rc = PTR_ERR(priv->remap_addr); 1826 goto no_pdata; 1827 } 1828 1829 res_ctrl = platform_get_resource(pdev, IORESOURCE_MEM, 1); 1830 if (res_ctrl) { 1831 priv->ctrl_base = 1832 devm_ioremap_resource(&pdev->dev, res_ctrl); 1833 if (IS_ERR(priv->ctrl_base)) { 1834 rc = PTR_ERR(priv->ctrl_base); 1835 goto no_pdata; 1836 } 1837 } else { 1838 priv->ctrl_base = priv->remap_addr + pdata->ctrl_mod_reg_offset; 1839 } 1840 1841 priv->emac_base = priv->remap_addr + pdata->ctrl_reg_offset; 1842 ndev->base_addr = (unsigned long)priv->remap_addr; 1843 1844 hw_ram_addr = pdata->hw_ram_addr; 1845 if (!hw_ram_addr) 1846 hw_ram_addr = (u32 __force)res->start + pdata->ctrl_ram_offset; 1847 1848 memset(&dma_params, 0, sizeof(dma_params)); 1849 dma_params.dev = &pdev->dev; 1850 dma_params.dmaregs = priv->emac_base; 1851 dma_params.rxthresh = priv->emac_base + 0x120; 1852 dma_params.rxfree = priv->emac_base + 0x140; 1853 dma_params.txhdp = priv->emac_base + 0x600; 1854 dma_params.rxhdp = priv->emac_base + 0x620; 1855 dma_params.txcp = priv->emac_base + 0x640; 1856 dma_params.rxcp = priv->emac_base + 0x660; 1857 dma_params.num_chan = EMAC_MAX_TXRX_CHANNELS; 1858 dma_params.min_packet_size = EMAC_DEF_MIN_ETHPKTSIZE; 1859 dma_params.desc_hw_addr = hw_ram_addr; 1860 dma_params.desc_mem_size = pdata->ctrl_ram_size; 1861 dma_params.desc_align = 16; 1862 1863 dma_params.desc_mem_phys = pdata->no_bd_ram ? 0 : 1864 (u32 __force)res->start + pdata->ctrl_ram_offset; 1865 1866 priv->dma = cpdma_ctlr_create(&dma_params); 1867 if (!priv->dma) { 1868 dev_err(&pdev->dev, "error initializing DMA\n"); 1869 rc = -ENOMEM; 1870 goto no_pdata; 1871 } 1872 1873 priv->txchan = cpdma_chan_create(priv->dma, tx_chan_num(EMAC_DEF_TX_CH), 1874 emac_tx_handler); 1875 priv->rxchan = cpdma_chan_create(priv->dma, rx_chan_num(EMAC_DEF_RX_CH), 1876 emac_rx_handler); 1877 if (WARN_ON(!priv->txchan || !priv->rxchan)) { 1878 rc = -ENOMEM; 1879 goto no_cpdma_chan; 1880 } 1881 1882 res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); 1883 if (!res) { 1884 dev_err(&pdev->dev, "error getting irq res\n"); 1885 rc = -ENOENT; 1886 goto no_cpdma_chan; 1887 } 1888 ndev->irq = res->start; 1889 1890 rc = davinci_emac_try_get_mac(pdev, res_ctrl ? 0 : 1, priv->mac_addr); 1891 if (!rc) 1892 ether_addr_copy(ndev->dev_addr, priv->mac_addr); 1893 1894 if (!is_valid_ether_addr(priv->mac_addr)) { 1895 /* Use random MAC if none passed */ 1896 eth_hw_addr_random(ndev); 1897 memcpy(priv->mac_addr, ndev->dev_addr, ndev->addr_len); 1898 dev_warn(&pdev->dev, "using random MAC addr: %pM\n", 1899 priv->mac_addr); 1900 } 1901 1902 ndev->netdev_ops = &emac_netdev_ops; 1903 ndev->ethtool_ops = ðtool_ops; 1904 netif_napi_add(ndev, &priv->napi, emac_poll, EMAC_POLL_WEIGHT); 1905 1906 pm_runtime_enable(&pdev->dev); 1907 rc = pm_runtime_get_sync(&pdev->dev); 1908 if (rc < 0) { 1909 pm_runtime_put_noidle(&pdev->dev); 1910 dev_err(&pdev->dev, "%s: failed to get_sync(%d)\n", 1911 __func__, rc); 1912 goto no_cpdma_chan; 1913 } 1914 1915 /* register the network device */ 1916 SET_NETDEV_DEV(ndev, &pdev->dev); 1917 rc = register_netdev(ndev); 1918 if (rc) { 1919 dev_err(&pdev->dev, "error in register_netdev\n"); 1920 rc = -ENODEV; 1921 pm_runtime_put(&pdev->dev); 1922 goto no_cpdma_chan; 1923 } 1924 1925 1926 if (netif_msg_probe(priv)) { 1927 dev_notice(&pdev->dev, "DaVinci EMAC Probe found device " 1928 "(regs: %p, irq: %d)\n", 1929 (void *)priv->emac_base_phys, ndev->irq); 1930 } 1931 pm_runtime_put(&pdev->dev); 1932 1933 return 0; 1934 1935 no_cpdma_chan: 1936 if (priv->txchan) 1937 cpdma_chan_destroy(priv->txchan); 1938 if (priv->rxchan) 1939 cpdma_chan_destroy(priv->rxchan); 1940 cpdma_ctlr_destroy(priv->dma); 1941 no_pdata: 1942 free_netdev(ndev); 1943 return rc; 1944 } 1945 1946 /** 1947 * davinci_emac_remove - EMAC device remove 1948 * @pdev: The DaVinci EMAC device that we are removing 1949 * 1950 * Called when removing the device driver. We disable clock usage and release 1951 * the resources taken up by the driver and unregister network device 1952 */ 1953 static int davinci_emac_remove(struct platform_device *pdev) 1954 { 1955 struct net_device *ndev = platform_get_drvdata(pdev); 1956 struct emac_priv *priv = netdev_priv(ndev); 1957 1958 dev_notice(&ndev->dev, "DaVinci EMAC: davinci_emac_remove()\n"); 1959 1960 if (priv->txchan) 1961 cpdma_chan_destroy(priv->txchan); 1962 if (priv->rxchan) 1963 cpdma_chan_destroy(priv->rxchan); 1964 cpdma_ctlr_destroy(priv->dma); 1965 1966 unregister_netdev(ndev); 1967 of_node_put(priv->phy_node); 1968 pm_runtime_disable(&pdev->dev); 1969 free_netdev(ndev); 1970 1971 return 0; 1972 } 1973 1974 static int davinci_emac_suspend(struct device *dev) 1975 { 1976 struct platform_device *pdev = to_platform_device(dev); 1977 struct net_device *ndev = platform_get_drvdata(pdev); 1978 1979 if (netif_running(ndev)) 1980 emac_dev_stop(ndev); 1981 1982 return 0; 1983 } 1984 1985 static int davinci_emac_resume(struct device *dev) 1986 { 1987 struct platform_device *pdev = to_platform_device(dev); 1988 struct net_device *ndev = platform_get_drvdata(pdev); 1989 1990 if (netif_running(ndev)) 1991 emac_dev_open(ndev); 1992 1993 return 0; 1994 } 1995 1996 static const struct dev_pm_ops davinci_emac_pm_ops = { 1997 .suspend = davinci_emac_suspend, 1998 .resume = davinci_emac_resume, 1999 }; 2000 2001 #if IS_ENABLED(CONFIG_OF) 2002 static const struct emac_platform_data am3517_emac_data = { 2003 .version = EMAC_VERSION_2, 2004 .hw_ram_addr = 0x01e20000, 2005 }; 2006 2007 static const struct emac_platform_data dm816_emac_data = { 2008 .version = EMAC_VERSION_2, 2009 }; 2010 2011 static const struct of_device_id davinci_emac_of_match[] = { 2012 {.compatible = "ti,davinci-dm6467-emac", }, 2013 {.compatible = "ti,am3517-emac", .data = &am3517_emac_data, }, 2014 {.compatible = "ti,dm816-emac", .data = &dm816_emac_data, }, 2015 {}, 2016 }; 2017 MODULE_DEVICE_TABLE(of, davinci_emac_of_match); 2018 #endif 2019 2020 /* davinci_emac_driver: EMAC platform driver structure */ 2021 static struct platform_driver davinci_emac_driver = { 2022 .driver = { 2023 .name = "davinci_emac", 2024 .pm = &davinci_emac_pm_ops, 2025 .of_match_table = of_match_ptr(davinci_emac_of_match), 2026 }, 2027 .probe = davinci_emac_probe, 2028 .remove = davinci_emac_remove, 2029 }; 2030 2031 /** 2032 * davinci_emac_init - EMAC driver module init 2033 * 2034 * Called when initializing the driver. We register the driver with 2035 * the platform. 2036 */ 2037 static int __init davinci_emac_init(void) 2038 { 2039 return platform_driver_register(&davinci_emac_driver); 2040 } 2041 late_initcall(davinci_emac_init); 2042 2043 /** 2044 * davinci_emac_exit - EMAC driver module exit 2045 * 2046 * Called when exiting the driver completely. We unregister the driver with 2047 * the platform and exit 2048 */ 2049 static void __exit davinci_emac_exit(void) 2050 { 2051 platform_driver_unregister(&davinci_emac_driver); 2052 } 2053 module_exit(davinci_emac_exit); 2054 2055 MODULE_LICENSE("GPL"); 2056 MODULE_AUTHOR("DaVinci EMAC Maintainer: Anant Gole <anantgole@ti.com>"); 2057 MODULE_AUTHOR("DaVinci EMAC Maintainer: Chaithrika U S <chaithrika@ti.com>"); 2058 MODULE_DESCRIPTION("DaVinci EMAC Ethernet driver"); 2059