1 /*
2  * DaVinci Ethernet Medium Access Controller
3  *
4  * DaVinci EMAC is based upon CPPI 3.0 TI DMA engine
5  *
6  * Copyright (C) 2009 Texas Instruments.
7  *
8  * ---------------------------------------------------------------------------
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of the GNU General Public License as published by
12  * the Free Software Foundation; either version 2 of the License, or
13  * (at your option) any later version.
14  *
15  * This program is distributed in the hope that it will be useful,
16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18  * GNU General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public License
21  * along with this program; if not, write to the Free Software
22  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23  * ---------------------------------------------------------------------------
24  * History:
25  * 0-5 A number of folks worked on this driver in bits and pieces but the major
26  *     contribution came from Suraj Iyer and Anant Gole
27  * 6.0 Anant Gole - rewrote the driver as per Linux conventions
28  * 6.1 Chaithrika U S - added support for Gigabit and RMII features,
29  *     PHY layer usage
30  */
31 
32 #include <linux/module.h>
33 #include <linux/kernel.h>
34 #include <linux/sched.h>
35 #include <linux/string.h>
36 #include <linux/timer.h>
37 #include <linux/errno.h>
38 #include <linux/in.h>
39 #include <linux/ioport.h>
40 #include <linux/slab.h>
41 #include <linux/mm.h>
42 #include <linux/interrupt.h>
43 #include <linux/init.h>
44 #include <linux/netdevice.h>
45 #include <linux/etherdevice.h>
46 #include <linux/skbuff.h>
47 #include <linux/ethtool.h>
48 #include <linux/highmem.h>
49 #include <linux/proc_fs.h>
50 #include <linux/ctype.h>
51 #include <linux/spinlock.h>
52 #include <linux/dma-mapping.h>
53 #include <linux/clk.h>
54 #include <linux/platform_device.h>
55 #include <linux/regmap.h>
56 #include <linux/semaphore.h>
57 #include <linux/phy.h>
58 #include <linux/bitops.h>
59 #include <linux/io.h>
60 #include <linux/uaccess.h>
61 #include <linux/pm_runtime.h>
62 #include <linux/davinci_emac.h>
63 #include <linux/of.h>
64 #include <linux/of_address.h>
65 #include <linux/of_device.h>
66 #include <linux/of_mdio.h>
67 #include <linux/of_irq.h>
68 #include <linux/of_net.h>
69 #include <linux/mfd/syscon.h>
70 
71 #include <asm/irq.h>
72 #include <asm/page.h>
73 
74 #include "cpsw.h"
75 #include "davinci_cpdma.h"
76 
77 static int debug_level;
78 module_param(debug_level, int, 0);
79 MODULE_PARM_DESC(debug_level, "DaVinci EMAC debug level (NETIF_MSG bits)");
80 
81 /* Netif debug messages possible */
82 #define DAVINCI_EMAC_DEBUG	(NETIF_MSG_DRV | \
83 				NETIF_MSG_PROBE | \
84 				NETIF_MSG_LINK | \
85 				NETIF_MSG_TIMER | \
86 				NETIF_MSG_IFDOWN | \
87 				NETIF_MSG_IFUP | \
88 				NETIF_MSG_RX_ERR | \
89 				NETIF_MSG_TX_ERR | \
90 				NETIF_MSG_TX_QUEUED | \
91 				NETIF_MSG_INTR | \
92 				NETIF_MSG_TX_DONE | \
93 				NETIF_MSG_RX_STATUS | \
94 				NETIF_MSG_PKTDATA | \
95 				NETIF_MSG_HW | \
96 				NETIF_MSG_WOL)
97 
98 /* version info */
99 #define EMAC_MAJOR_VERSION	6
100 #define EMAC_MINOR_VERSION	1
101 #define EMAC_MODULE_VERSION	"6.1"
102 MODULE_VERSION(EMAC_MODULE_VERSION);
103 static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1";
104 
105 /* Configuration items */
106 #define EMAC_DEF_PASS_CRC		(0) /* Do not pass CRC up to frames */
107 #define EMAC_DEF_QOS_EN			(0) /* EMAC proprietary QoS disabled */
108 #define EMAC_DEF_NO_BUFF_CHAIN		(0) /* No buffer chain */
109 #define EMAC_DEF_MACCTRL_FRAME_EN	(0) /* Discard Maccontrol frames */
110 #define EMAC_DEF_SHORT_FRAME_EN		(0) /* Discard short frames */
111 #define EMAC_DEF_ERROR_FRAME_EN		(0) /* Discard error frames */
112 #define EMAC_DEF_PROM_EN		(0) /* Promiscuous disabled */
113 #define EMAC_DEF_PROM_CH		(0) /* Promiscuous channel is 0 */
114 #define EMAC_DEF_BCAST_EN		(1) /* Broadcast enabled */
115 #define EMAC_DEF_BCAST_CH		(0) /* Broadcast channel is 0 */
116 #define EMAC_DEF_MCAST_EN		(1) /* Multicast enabled */
117 #define EMAC_DEF_MCAST_CH		(0) /* Multicast channel is 0 */
118 
119 #define EMAC_DEF_TXPRIO_FIXED		(1) /* TX Priority is fixed */
120 #define EMAC_DEF_TXPACING_EN		(0) /* TX pacing NOT supported*/
121 
122 #define EMAC_DEF_BUFFER_OFFSET		(0) /* Buffer offset to DMA (future) */
123 #define EMAC_DEF_MIN_ETHPKTSIZE		(60) /* Minimum ethernet pkt size */
124 #define EMAC_DEF_MAX_FRAME_SIZE		(1500 + 14 + 4 + 4)
125 #define EMAC_DEF_TX_CH			(0) /* Default 0th channel */
126 #define EMAC_DEF_RX_CH			(0) /* Default 0th channel */
127 #define EMAC_DEF_RX_NUM_DESC		(128)
128 #define EMAC_DEF_MAX_TX_CH		(1) /* Max TX channels configured */
129 #define EMAC_DEF_MAX_RX_CH		(1) /* Max RX channels configured */
130 #define EMAC_POLL_WEIGHT		(64) /* Default NAPI poll weight */
131 
132 /* Buffer descriptor parameters */
133 #define EMAC_DEF_TX_MAX_SERVICE		(32) /* TX max service BD's */
134 #define EMAC_DEF_RX_MAX_SERVICE		(64) /* should = netdev->weight */
135 
136 /* EMAC register related defines */
137 #define EMAC_ALL_MULTI_REG_VALUE	(0xFFFFFFFF)
138 #define EMAC_NUM_MULTICAST_BITS		(64)
139 #define EMAC_TX_CONTROL_TX_ENABLE_VAL	(0x1)
140 #define EMAC_RX_CONTROL_RX_ENABLE_VAL	(0x1)
141 #define EMAC_MAC_HOST_ERR_INTMASK_VAL	(0x2)
142 #define EMAC_RX_UNICAST_CLEAR_ALL	(0xFF)
143 #define EMAC_INT_MASK_CLEAR		(0xFF)
144 
145 /* RX MBP register bit positions */
146 #define EMAC_RXMBP_PASSCRC_MASK		BIT(30)
147 #define EMAC_RXMBP_QOSEN_MASK		BIT(29)
148 #define EMAC_RXMBP_NOCHAIN_MASK		BIT(28)
149 #define EMAC_RXMBP_CMFEN_MASK		BIT(24)
150 #define EMAC_RXMBP_CSFEN_MASK		BIT(23)
151 #define EMAC_RXMBP_CEFEN_MASK		BIT(22)
152 #define EMAC_RXMBP_CAFEN_MASK		BIT(21)
153 #define EMAC_RXMBP_PROMCH_SHIFT		(16)
154 #define EMAC_RXMBP_PROMCH_MASK		(0x7 << 16)
155 #define EMAC_RXMBP_BROADEN_MASK		BIT(13)
156 #define EMAC_RXMBP_BROADCH_SHIFT	(8)
157 #define EMAC_RXMBP_BROADCH_MASK		(0x7 << 8)
158 #define EMAC_RXMBP_MULTIEN_MASK		BIT(5)
159 #define EMAC_RXMBP_MULTICH_SHIFT	(0)
160 #define EMAC_RXMBP_MULTICH_MASK		(0x7)
161 #define EMAC_RXMBP_CHMASK		(0x7)
162 
163 /* EMAC register definitions/bit maps used */
164 # define EMAC_MBP_RXPROMISC		(0x00200000)
165 # define EMAC_MBP_PROMISCCH(ch)		(((ch) & 0x7) << 16)
166 # define EMAC_MBP_RXBCAST		(0x00002000)
167 # define EMAC_MBP_BCASTCHAN(ch)		(((ch) & 0x7) << 8)
168 # define EMAC_MBP_RXMCAST		(0x00000020)
169 # define EMAC_MBP_MCASTCHAN(ch)		((ch) & 0x7)
170 
171 /* EMAC mac_control register */
172 #define EMAC_MACCONTROL_TXPTYPE		BIT(9)
173 #define EMAC_MACCONTROL_TXPACEEN	BIT(6)
174 #define EMAC_MACCONTROL_GMIIEN		BIT(5)
175 #define EMAC_MACCONTROL_GIGABITEN	BIT(7)
176 #define EMAC_MACCONTROL_FULLDUPLEXEN	BIT(0)
177 #define EMAC_MACCONTROL_RMIISPEED_MASK	BIT(15)
178 
179 /* GIGABIT MODE related bits */
180 #define EMAC_DM646X_MACCONTORL_GIG	BIT(7)
181 #define EMAC_DM646X_MACCONTORL_GIGFORCE	BIT(17)
182 
183 /* EMAC mac_status register */
184 #define EMAC_MACSTATUS_TXERRCODE_MASK	(0xF00000)
185 #define EMAC_MACSTATUS_TXERRCODE_SHIFT	(20)
186 #define EMAC_MACSTATUS_TXERRCH_MASK	(0x7)
187 #define EMAC_MACSTATUS_TXERRCH_SHIFT	(16)
188 #define EMAC_MACSTATUS_RXERRCODE_MASK	(0xF000)
189 #define EMAC_MACSTATUS_RXERRCODE_SHIFT	(12)
190 #define EMAC_MACSTATUS_RXERRCH_MASK	(0x7)
191 #define EMAC_MACSTATUS_RXERRCH_SHIFT	(8)
192 
193 /* EMAC RX register masks */
194 #define EMAC_RX_MAX_LEN_MASK		(0xFFFF)
195 #define EMAC_RX_BUFFER_OFFSET_MASK	(0xFFFF)
196 
197 /* MAC_IN_VECTOR (0x180) register bit fields */
198 #define EMAC_DM644X_MAC_IN_VECTOR_HOST_INT	BIT(17)
199 #define EMAC_DM644X_MAC_IN_VECTOR_STATPEND_INT	BIT(16)
200 #define EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC	BIT(8)
201 #define EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC	BIT(0)
202 
203 /** NOTE:: For DM646x the IN_VECTOR has changed */
204 #define EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC	BIT(EMAC_DEF_RX_CH)
205 #define EMAC_DM646X_MAC_IN_VECTOR_TX_INT_VEC	BIT(16 + EMAC_DEF_TX_CH)
206 #define EMAC_DM646X_MAC_IN_VECTOR_HOST_INT	BIT(26)
207 #define EMAC_DM646X_MAC_IN_VECTOR_STATPEND_INT	BIT(27)
208 
209 /* CPPI bit positions */
210 #define EMAC_CPPI_SOP_BIT		BIT(31)
211 #define EMAC_CPPI_EOP_BIT		BIT(30)
212 #define EMAC_CPPI_OWNERSHIP_BIT		BIT(29)
213 #define EMAC_CPPI_EOQ_BIT		BIT(28)
214 #define EMAC_CPPI_TEARDOWN_COMPLETE_BIT BIT(27)
215 #define EMAC_CPPI_PASS_CRC_BIT		BIT(26)
216 #define EMAC_RX_BD_BUF_SIZE		(0xFFFF)
217 #define EMAC_BD_LENGTH_FOR_CACHE	(16) /* only CPPI bytes */
218 #define EMAC_RX_BD_PKT_LENGTH_MASK	(0xFFFF)
219 
220 /* Max hardware defines */
221 #define EMAC_MAX_TXRX_CHANNELS		 (8)  /* Max hardware channels */
222 #define EMAC_DEF_MAX_MULTICAST_ADDRESSES (64) /* Max mcast addr's */
223 
224 /* EMAC Peripheral Device Register Memory Layout structure */
225 #define EMAC_MACINVECTOR	0x90
226 
227 #define EMAC_DM646X_MACEOIVECTOR	0x94
228 
229 #define EMAC_MACINTSTATRAW	0xB0
230 #define EMAC_MACINTSTATMASKED	0xB4
231 #define EMAC_MACINTMASKSET	0xB8
232 #define EMAC_MACINTMASKCLEAR	0xBC
233 
234 #define EMAC_RXMBPENABLE	0x100
235 #define EMAC_RXUNICASTSET	0x104
236 #define EMAC_RXUNICASTCLEAR	0x108
237 #define EMAC_RXMAXLEN		0x10C
238 #define EMAC_RXBUFFEROFFSET	0x110
239 #define EMAC_RXFILTERLOWTHRESH	0x114
240 
241 #define EMAC_MACCONTROL		0x160
242 #define EMAC_MACSTATUS		0x164
243 #define EMAC_EMCONTROL		0x168
244 #define EMAC_FIFOCONTROL	0x16C
245 #define EMAC_MACCONFIG		0x170
246 #define EMAC_SOFTRESET		0x174
247 #define EMAC_MACSRCADDRLO	0x1D0
248 #define EMAC_MACSRCADDRHI	0x1D4
249 #define EMAC_MACHASH1		0x1D8
250 #define EMAC_MACHASH2		0x1DC
251 #define EMAC_MACADDRLO		0x500
252 #define EMAC_MACADDRHI		0x504
253 #define EMAC_MACINDEX		0x508
254 
255 /* EMAC statistics registers */
256 #define EMAC_RXGOODFRAMES	0x200
257 #define EMAC_RXBCASTFRAMES	0x204
258 #define EMAC_RXMCASTFRAMES	0x208
259 #define EMAC_RXPAUSEFRAMES	0x20C
260 #define EMAC_RXCRCERRORS	0x210
261 #define EMAC_RXALIGNCODEERRORS	0x214
262 #define EMAC_RXOVERSIZED	0x218
263 #define EMAC_RXJABBER		0x21C
264 #define EMAC_RXUNDERSIZED	0x220
265 #define EMAC_RXFRAGMENTS	0x224
266 #define EMAC_RXFILTERED		0x228
267 #define EMAC_RXQOSFILTERED	0x22C
268 #define EMAC_RXOCTETS		0x230
269 #define EMAC_TXGOODFRAMES	0x234
270 #define EMAC_TXBCASTFRAMES	0x238
271 #define EMAC_TXMCASTFRAMES	0x23C
272 #define EMAC_TXPAUSEFRAMES	0x240
273 #define EMAC_TXDEFERRED		0x244
274 #define EMAC_TXCOLLISION	0x248
275 #define EMAC_TXSINGLECOLL	0x24C
276 #define EMAC_TXMULTICOLL	0x250
277 #define EMAC_TXEXCESSIVECOLL	0x254
278 #define EMAC_TXLATECOLL		0x258
279 #define EMAC_TXUNDERRUN		0x25C
280 #define EMAC_TXCARRIERSENSE	0x260
281 #define EMAC_TXOCTETS		0x264
282 #define EMAC_NETOCTETS		0x280
283 #define EMAC_RXSOFOVERRUNS	0x284
284 #define EMAC_RXMOFOVERRUNS	0x288
285 #define EMAC_RXDMAOVERRUNS	0x28C
286 
287 /* EMAC DM644x control registers */
288 #define EMAC_CTRL_EWCTL		(0x4)
289 #define EMAC_CTRL_EWINTTCNT	(0x8)
290 
291 /* EMAC DM644x control module masks */
292 #define EMAC_DM644X_EWINTCNT_MASK	0x1FFFF
293 #define EMAC_DM644X_INTMIN_INTVL	0x1
294 #define EMAC_DM644X_INTMAX_INTVL	(EMAC_DM644X_EWINTCNT_MASK)
295 
296 /* EMAC DM646X control module registers */
297 #define EMAC_DM646X_CMINTCTRL	0x0C
298 #define EMAC_DM646X_CMRXINTEN	0x14
299 #define EMAC_DM646X_CMTXINTEN	0x18
300 #define EMAC_DM646X_CMRXINTMAX	0x70
301 #define EMAC_DM646X_CMTXINTMAX	0x74
302 
303 /* EMAC DM646X control module masks */
304 #define EMAC_DM646X_INTPACEEN		(0x3 << 16)
305 #define EMAC_DM646X_INTPRESCALE_MASK	(0x7FF << 0)
306 #define EMAC_DM646X_CMINTMAX_CNT	63
307 #define EMAC_DM646X_CMINTMIN_CNT	2
308 #define EMAC_DM646X_CMINTMAX_INTVL	(1000 / EMAC_DM646X_CMINTMIN_CNT)
309 #define EMAC_DM646X_CMINTMIN_INTVL	((1000 / EMAC_DM646X_CMINTMAX_CNT) + 1)
310 
311 
312 /* EMAC EOI codes for C0 */
313 #define EMAC_DM646X_MAC_EOI_C0_RXEN	(0x01)
314 #define EMAC_DM646X_MAC_EOI_C0_TXEN	(0x02)
315 
316 /* EMAC Stats Clear Mask */
317 #define EMAC_STATS_CLR_MASK    (0xFFFFFFFF)
318 
319 /* emac_priv: EMAC private data structure
320  *
321  * EMAC adapter private data structure
322  */
323 struct emac_priv {
324 	u32 msg_enable;
325 	struct net_device *ndev;
326 	struct platform_device *pdev;
327 	struct napi_struct napi;
328 	char mac_addr[6];
329 	void __iomem *remap_addr;
330 	u32 emac_base_phys;
331 	void __iomem *emac_base;
332 	void __iomem *ctrl_base;
333 	struct cpdma_ctlr *dma;
334 	struct cpdma_chan *txchan;
335 	struct cpdma_chan *rxchan;
336 	u32 link; /* 1=link on, 0=link off */
337 	u32 speed; /* 0=Auto Neg, 1=No PHY, 10,100, 1000 - mbps */
338 	u32 duplex; /* Link duplex: 0=Half, 1=Full */
339 	u32 rx_buf_size;
340 	u32 isr_count;
341 	u32 coal_intvl;
342 	u32 bus_freq_mhz;
343 	u8 rmii_en;
344 	u8 version;
345 	u32 mac_hash1;
346 	u32 mac_hash2;
347 	u32 multicast_hash_cnt[EMAC_NUM_MULTICAST_BITS];
348 	u32 rx_addr_type;
349 	const char *phy_id;
350 	struct device_node *phy_node;
351 	struct phy_device *phydev;
352 	spinlock_t lock;
353 	/*platform specific members*/
354 	void (*int_enable) (void);
355 	void (*int_disable) (void);
356 };
357 
358 /* EMAC TX Host Error description strings */
359 static char *emac_txhost_errcodes[16] = {
360 	"No error", "SOP error", "Ownership bit not set in SOP buffer",
361 	"Zero Next Buffer Descriptor Pointer Without EOP",
362 	"Zero Buffer Pointer", "Zero Buffer Length", "Packet Length Error",
363 	"Reserved", "Reserved", "Reserved", "Reserved", "Reserved",
364 	"Reserved", "Reserved", "Reserved", "Reserved"
365 };
366 
367 /* EMAC RX Host Error description strings */
368 static char *emac_rxhost_errcodes[16] = {
369 	"No error", "Reserved", "Ownership bit not set in input buffer",
370 	"Reserved", "Zero Buffer Pointer", "Reserved", "Reserved",
371 	"Reserved", "Reserved", "Reserved", "Reserved", "Reserved",
372 	"Reserved", "Reserved", "Reserved", "Reserved"
373 };
374 
375 /* Helper macros */
376 #define emac_read(reg)		  ioread32(priv->emac_base + (reg))
377 #define emac_write(reg, val)      iowrite32(val, priv->emac_base + (reg))
378 
379 #define emac_ctrl_read(reg)	  ioread32((priv->ctrl_base + (reg)))
380 #define emac_ctrl_write(reg, val) iowrite32(val, (priv->ctrl_base + (reg)))
381 
382 /**
383  * emac_dump_regs - Dump important EMAC registers to debug terminal
384  * @priv: The DaVinci EMAC private adapter structure
385  *
386  * Executes ethtool set cmd & sets phy mode
387  *
388  */
389 static void emac_dump_regs(struct emac_priv *priv)
390 {
391 	struct device *emac_dev = &priv->ndev->dev;
392 
393 	/* Print important registers in EMAC */
394 	dev_info(emac_dev, "EMAC Basic registers\n");
395 	if (priv->version == EMAC_VERSION_1) {
396 		dev_info(emac_dev, "EMAC: EWCTL: %08X, EWINTTCNT: %08X\n",
397 			emac_ctrl_read(EMAC_CTRL_EWCTL),
398 			emac_ctrl_read(EMAC_CTRL_EWINTTCNT));
399 	}
400 	dev_info(emac_dev, "EMAC: EmuControl:%08X, FifoControl: %08X\n",
401 		emac_read(EMAC_EMCONTROL), emac_read(EMAC_FIFOCONTROL));
402 	dev_info(emac_dev, "EMAC: MBPEnable:%08X, RXUnicastSet: %08X, "\
403 		"RXMaxLen=%08X\n", emac_read(EMAC_RXMBPENABLE),
404 		emac_read(EMAC_RXUNICASTSET), emac_read(EMAC_RXMAXLEN));
405 	dev_info(emac_dev, "EMAC: MacControl:%08X, MacStatus: %08X, "\
406 		"MacConfig=%08X\n", emac_read(EMAC_MACCONTROL),
407 		emac_read(EMAC_MACSTATUS), emac_read(EMAC_MACCONFIG));
408 	dev_info(emac_dev, "EMAC Statistics\n");
409 	dev_info(emac_dev, "EMAC: rx_good_frames:%d\n",
410 		emac_read(EMAC_RXGOODFRAMES));
411 	dev_info(emac_dev, "EMAC: rx_broadcast_frames:%d\n",
412 		emac_read(EMAC_RXBCASTFRAMES));
413 	dev_info(emac_dev, "EMAC: rx_multicast_frames:%d\n",
414 		emac_read(EMAC_RXMCASTFRAMES));
415 	dev_info(emac_dev, "EMAC: rx_pause_frames:%d\n",
416 		emac_read(EMAC_RXPAUSEFRAMES));
417 	dev_info(emac_dev, "EMAC: rx_crcerrors:%d\n",
418 		emac_read(EMAC_RXCRCERRORS));
419 	dev_info(emac_dev, "EMAC: rx_align_code_errors:%d\n",
420 		emac_read(EMAC_RXALIGNCODEERRORS));
421 	dev_info(emac_dev, "EMAC: rx_oversized_frames:%d\n",
422 		emac_read(EMAC_RXOVERSIZED));
423 	dev_info(emac_dev, "EMAC: rx_jabber_frames:%d\n",
424 		emac_read(EMAC_RXJABBER));
425 	dev_info(emac_dev, "EMAC: rx_undersized_frames:%d\n",
426 		emac_read(EMAC_RXUNDERSIZED));
427 	dev_info(emac_dev, "EMAC: rx_fragments:%d\n",
428 		emac_read(EMAC_RXFRAGMENTS));
429 	dev_info(emac_dev, "EMAC: rx_filtered_frames:%d\n",
430 		emac_read(EMAC_RXFILTERED));
431 	dev_info(emac_dev, "EMAC: rx_qos_filtered_frames:%d\n",
432 		emac_read(EMAC_RXQOSFILTERED));
433 	dev_info(emac_dev, "EMAC: rx_octets:%d\n",
434 		emac_read(EMAC_RXOCTETS));
435 	dev_info(emac_dev, "EMAC: tx_goodframes:%d\n",
436 		emac_read(EMAC_TXGOODFRAMES));
437 	dev_info(emac_dev, "EMAC: tx_bcastframes:%d\n",
438 		emac_read(EMAC_TXBCASTFRAMES));
439 	dev_info(emac_dev, "EMAC: tx_mcastframes:%d\n",
440 		emac_read(EMAC_TXMCASTFRAMES));
441 	dev_info(emac_dev, "EMAC: tx_pause_frames:%d\n",
442 		emac_read(EMAC_TXPAUSEFRAMES));
443 	dev_info(emac_dev, "EMAC: tx_deferred_frames:%d\n",
444 		emac_read(EMAC_TXDEFERRED));
445 	dev_info(emac_dev, "EMAC: tx_collision_frames:%d\n",
446 		emac_read(EMAC_TXCOLLISION));
447 	dev_info(emac_dev, "EMAC: tx_single_coll_frames:%d\n",
448 		emac_read(EMAC_TXSINGLECOLL));
449 	dev_info(emac_dev, "EMAC: tx_mult_coll_frames:%d\n",
450 		emac_read(EMAC_TXMULTICOLL));
451 	dev_info(emac_dev, "EMAC: tx_excessive_collisions:%d\n",
452 		emac_read(EMAC_TXEXCESSIVECOLL));
453 	dev_info(emac_dev, "EMAC: tx_late_collisions:%d\n",
454 		emac_read(EMAC_TXLATECOLL));
455 	dev_info(emac_dev, "EMAC: tx_underrun:%d\n",
456 		emac_read(EMAC_TXUNDERRUN));
457 	dev_info(emac_dev, "EMAC: tx_carrier_sense_errors:%d\n",
458 		emac_read(EMAC_TXCARRIERSENSE));
459 	dev_info(emac_dev, "EMAC: tx_octets:%d\n",
460 		emac_read(EMAC_TXOCTETS));
461 	dev_info(emac_dev, "EMAC: net_octets:%d\n",
462 		emac_read(EMAC_NETOCTETS));
463 	dev_info(emac_dev, "EMAC: rx_sof_overruns:%d\n",
464 		emac_read(EMAC_RXSOFOVERRUNS));
465 	dev_info(emac_dev, "EMAC: rx_mof_overruns:%d\n",
466 		emac_read(EMAC_RXMOFOVERRUNS));
467 	dev_info(emac_dev, "EMAC: rx_dma_overruns:%d\n",
468 		emac_read(EMAC_RXDMAOVERRUNS));
469 
470 	cpdma_ctlr_dump(priv->dma);
471 }
472 
473 /**
474  * emac_get_drvinfo - Get EMAC driver information
475  * @ndev: The DaVinci EMAC network adapter
476  * @info: ethtool info structure containing name and version
477  *
478  * Returns EMAC driver information (name and version)
479  *
480  */
481 static void emac_get_drvinfo(struct net_device *ndev,
482 			     struct ethtool_drvinfo *info)
483 {
484 	strlcpy(info->driver, emac_version_string, sizeof(info->driver));
485 	strlcpy(info->version, EMAC_MODULE_VERSION, sizeof(info->version));
486 }
487 
488 /**
489  * emac_get_settings - Get EMAC settings
490  * @ndev: The DaVinci EMAC network adapter
491  * @ecmd: ethtool command
492  *
493  * Executes ethool get command
494  *
495  */
496 static int emac_get_settings(struct net_device *ndev,
497 			     struct ethtool_cmd *ecmd)
498 {
499 	struct emac_priv *priv = netdev_priv(ndev);
500 	if (priv->phydev)
501 		return phy_ethtool_gset(priv->phydev, ecmd);
502 	else
503 		return -EOPNOTSUPP;
504 
505 }
506 
507 /**
508  * emac_set_settings - Set EMAC settings
509  * @ndev: The DaVinci EMAC network adapter
510  * @ecmd: ethtool command
511  *
512  * Executes ethool set command
513  *
514  */
515 static int emac_set_settings(struct net_device *ndev, struct ethtool_cmd *ecmd)
516 {
517 	struct emac_priv *priv = netdev_priv(ndev);
518 	if (priv->phydev)
519 		return phy_ethtool_sset(priv->phydev, ecmd);
520 	else
521 		return -EOPNOTSUPP;
522 
523 }
524 
525 /**
526  * emac_get_coalesce - Get interrupt coalesce settings for this device
527  * @ndev : The DaVinci EMAC network adapter
528  * @coal : ethtool coalesce settings structure
529  *
530  * Fetch the current interrupt coalesce settings
531  *
532  */
533 static int emac_get_coalesce(struct net_device *ndev,
534 				struct ethtool_coalesce *coal)
535 {
536 	struct emac_priv *priv = netdev_priv(ndev);
537 
538 	coal->rx_coalesce_usecs = priv->coal_intvl;
539 	return 0;
540 
541 }
542 
543 /**
544  * emac_set_coalesce - Set interrupt coalesce settings for this device
545  * @ndev : The DaVinci EMAC network adapter
546  * @coal : ethtool coalesce settings structure
547  *
548  * Set interrupt coalesce parameters
549  *
550  */
551 static int emac_set_coalesce(struct net_device *ndev,
552 				struct ethtool_coalesce *coal)
553 {
554 	struct emac_priv *priv = netdev_priv(ndev);
555 	u32 int_ctrl, num_interrupts = 0;
556 	u32 prescale = 0, addnl_dvdr = 1, coal_intvl = 0;
557 
558 	if (!coal->rx_coalesce_usecs)
559 		return -EINVAL;
560 
561 	coal_intvl = coal->rx_coalesce_usecs;
562 
563 	switch (priv->version) {
564 	case EMAC_VERSION_2:
565 		int_ctrl =  emac_ctrl_read(EMAC_DM646X_CMINTCTRL);
566 		prescale = priv->bus_freq_mhz * 4;
567 
568 		if (coal_intvl < EMAC_DM646X_CMINTMIN_INTVL)
569 			coal_intvl = EMAC_DM646X_CMINTMIN_INTVL;
570 
571 		if (coal_intvl > EMAC_DM646X_CMINTMAX_INTVL) {
572 			/*
573 			 * Interrupt pacer works with 4us Pulse, we can
574 			 * throttle further by dilating the 4us pulse.
575 			 */
576 			addnl_dvdr = EMAC_DM646X_INTPRESCALE_MASK / prescale;
577 
578 			if (addnl_dvdr > 1) {
579 				prescale *= addnl_dvdr;
580 				if (coal_intvl > (EMAC_DM646X_CMINTMAX_INTVL
581 							* addnl_dvdr))
582 					coal_intvl = (EMAC_DM646X_CMINTMAX_INTVL
583 							* addnl_dvdr);
584 			} else {
585 				addnl_dvdr = 1;
586 				coal_intvl = EMAC_DM646X_CMINTMAX_INTVL;
587 			}
588 		}
589 
590 		num_interrupts = (1000 * addnl_dvdr) / coal_intvl;
591 
592 		int_ctrl |= EMAC_DM646X_INTPACEEN;
593 		int_ctrl &= (~EMAC_DM646X_INTPRESCALE_MASK);
594 		int_ctrl |= (prescale & EMAC_DM646X_INTPRESCALE_MASK);
595 		emac_ctrl_write(EMAC_DM646X_CMINTCTRL, int_ctrl);
596 
597 		emac_ctrl_write(EMAC_DM646X_CMRXINTMAX, num_interrupts);
598 		emac_ctrl_write(EMAC_DM646X_CMTXINTMAX, num_interrupts);
599 
600 		break;
601 	default:
602 		int_ctrl = emac_ctrl_read(EMAC_CTRL_EWINTTCNT);
603 		int_ctrl &= (~EMAC_DM644X_EWINTCNT_MASK);
604 		prescale = coal_intvl * priv->bus_freq_mhz;
605 		if (prescale > EMAC_DM644X_EWINTCNT_MASK) {
606 			prescale = EMAC_DM644X_EWINTCNT_MASK;
607 			coal_intvl = prescale / priv->bus_freq_mhz;
608 		}
609 		emac_ctrl_write(EMAC_CTRL_EWINTTCNT, (int_ctrl | prescale));
610 
611 		break;
612 	}
613 
614 	printk(KERN_INFO"Set coalesce to %d usecs.\n", coal_intvl);
615 	priv->coal_intvl = coal_intvl;
616 
617 	return 0;
618 
619 }
620 
621 
622 /* ethtool_ops: DaVinci EMAC Ethtool structure
623  *
624  * Ethtool support for EMAC adapter
625  */
626 static const struct ethtool_ops ethtool_ops = {
627 	.get_drvinfo = emac_get_drvinfo,
628 	.get_settings = emac_get_settings,
629 	.set_settings = emac_set_settings,
630 	.get_link = ethtool_op_get_link,
631 	.get_coalesce = emac_get_coalesce,
632 	.set_coalesce =  emac_set_coalesce,
633 	.get_ts_info = ethtool_op_get_ts_info,
634 };
635 
636 /**
637  * emac_update_phystatus - Update Phy status
638  * @priv: The DaVinci EMAC private adapter structure
639  *
640  * Updates phy status and takes action for network queue if required
641  * based upon link status
642  *
643  */
644 static void emac_update_phystatus(struct emac_priv *priv)
645 {
646 	u32 mac_control;
647 	u32 new_duplex;
648 	u32 cur_duplex;
649 	struct net_device *ndev = priv->ndev;
650 
651 	mac_control = emac_read(EMAC_MACCONTROL);
652 	cur_duplex = (mac_control & EMAC_MACCONTROL_FULLDUPLEXEN) ?
653 			DUPLEX_FULL : DUPLEX_HALF;
654 	if (priv->phydev)
655 		new_duplex = priv->phydev->duplex;
656 	else
657 		new_duplex = DUPLEX_FULL;
658 
659 	/* We get called only if link has changed (speed/duplex/status) */
660 	if ((priv->link) && (new_duplex != cur_duplex)) {
661 		priv->duplex = new_duplex;
662 		if (DUPLEX_FULL == priv->duplex)
663 			mac_control |= (EMAC_MACCONTROL_FULLDUPLEXEN);
664 		else
665 			mac_control &= ~(EMAC_MACCONTROL_FULLDUPLEXEN);
666 	}
667 
668 	if (priv->speed == SPEED_1000 && (priv->version == EMAC_VERSION_2)) {
669 		mac_control = emac_read(EMAC_MACCONTROL);
670 		mac_control |= (EMAC_DM646X_MACCONTORL_GIG |
671 				EMAC_DM646X_MACCONTORL_GIGFORCE);
672 	} else {
673 		/* Clear the GIG bit and GIGFORCE bit */
674 		mac_control &= ~(EMAC_DM646X_MACCONTORL_GIGFORCE |
675 					EMAC_DM646X_MACCONTORL_GIG);
676 
677 		if (priv->rmii_en && (priv->speed == SPEED_100))
678 			mac_control |= EMAC_MACCONTROL_RMIISPEED_MASK;
679 		else
680 			mac_control &= ~EMAC_MACCONTROL_RMIISPEED_MASK;
681 	}
682 
683 	/* Update mac_control if changed */
684 	emac_write(EMAC_MACCONTROL, mac_control);
685 
686 	if (priv->link) {
687 		/* link ON */
688 		if (!netif_carrier_ok(ndev))
689 			netif_carrier_on(ndev);
690 	/* reactivate the transmit queue if it is stopped */
691 		if (netif_running(ndev) && netif_queue_stopped(ndev))
692 			netif_wake_queue(ndev);
693 	} else {
694 		/* link OFF */
695 		if (netif_carrier_ok(ndev))
696 			netif_carrier_off(ndev);
697 		if (!netif_queue_stopped(ndev))
698 			netif_stop_queue(ndev);
699 	}
700 }
701 
702 /**
703  * hash_get - Calculate hash value from mac address
704  * @addr: mac address to delete from hash table
705  *
706  * Calculates hash value from mac address
707  *
708  */
709 static u32 hash_get(u8 *addr)
710 {
711 	u32 hash;
712 	u8 tmpval;
713 	int cnt;
714 	hash = 0;
715 
716 	for (cnt = 0; cnt < 2; cnt++) {
717 		tmpval = *addr++;
718 		hash ^= (tmpval >> 2) ^ (tmpval << 4);
719 		tmpval = *addr++;
720 		hash ^= (tmpval >> 4) ^ (tmpval << 2);
721 		tmpval = *addr++;
722 		hash ^= (tmpval >> 6) ^ (tmpval);
723 	}
724 
725 	return hash & 0x3F;
726 }
727 
728 /**
729  * hash_add - Hash function to add mac addr from hash table
730  * @priv: The DaVinci EMAC private adapter structure
731  * @mac_addr: mac address to delete from hash table
732  *
733  * Adds mac address to the internal hash table
734  *
735  */
736 static int hash_add(struct emac_priv *priv, u8 *mac_addr)
737 {
738 	struct device *emac_dev = &priv->ndev->dev;
739 	u32 rc = 0;
740 	u32 hash_bit;
741 	u32 hash_value = hash_get(mac_addr);
742 
743 	if (hash_value >= EMAC_NUM_MULTICAST_BITS) {
744 		if (netif_msg_drv(priv)) {
745 			dev_err(emac_dev, "DaVinci EMAC: hash_add(): Invalid "\
746 				"Hash %08x, should not be greater than %08x",
747 				hash_value, (EMAC_NUM_MULTICAST_BITS - 1));
748 		}
749 		return -1;
750 	}
751 
752 	/* set the hash bit only if not previously set */
753 	if (priv->multicast_hash_cnt[hash_value] == 0) {
754 		rc = 1; /* hash value changed */
755 		if (hash_value < 32) {
756 			hash_bit = BIT(hash_value);
757 			priv->mac_hash1 |= hash_bit;
758 		} else {
759 			hash_bit = BIT((hash_value - 32));
760 			priv->mac_hash2 |= hash_bit;
761 		}
762 	}
763 
764 	/* incr counter for num of mcast addr's mapped to "this" hash bit */
765 	++priv->multicast_hash_cnt[hash_value];
766 
767 	return rc;
768 }
769 
770 /**
771  * hash_del - Hash function to delete mac addr from hash table
772  * @priv: The DaVinci EMAC private adapter structure
773  * @mac_addr: mac address to delete from hash table
774  *
775  * Removes mac address from the internal hash table
776  *
777  */
778 static int hash_del(struct emac_priv *priv, u8 *mac_addr)
779 {
780 	u32 hash_value;
781 	u32 hash_bit;
782 
783 	hash_value = hash_get(mac_addr);
784 	if (priv->multicast_hash_cnt[hash_value] > 0) {
785 		/* dec cntr for num of mcast addr's mapped to this hash bit */
786 		--priv->multicast_hash_cnt[hash_value];
787 	}
788 
789 	/* if counter still > 0, at least one multicast address refers
790 	 * to this hash bit. so return 0 */
791 	if (priv->multicast_hash_cnt[hash_value] > 0)
792 		return 0;
793 
794 	if (hash_value < 32) {
795 		hash_bit = BIT(hash_value);
796 		priv->mac_hash1 &= ~hash_bit;
797 	} else {
798 		hash_bit = BIT((hash_value - 32));
799 		priv->mac_hash2 &= ~hash_bit;
800 	}
801 
802 	/* return 1 to indicate change in mac_hash registers reqd */
803 	return 1;
804 }
805 
806 /* EMAC multicast operation */
807 #define EMAC_MULTICAST_ADD	0
808 #define EMAC_MULTICAST_DEL	1
809 #define EMAC_ALL_MULTI_SET	2
810 #define EMAC_ALL_MULTI_CLR	3
811 
812 /**
813  * emac_add_mcast - Set multicast address in the EMAC adapter (Internal)
814  * @priv: The DaVinci EMAC private adapter structure
815  * @action: multicast operation to perform
816  * mac_addr: mac address to set
817  *
818  * Set multicast addresses in EMAC adapter - internal function
819  *
820  */
821 static void emac_add_mcast(struct emac_priv *priv, u32 action, u8 *mac_addr)
822 {
823 	struct device *emac_dev = &priv->ndev->dev;
824 	int update = -1;
825 
826 	switch (action) {
827 	case EMAC_MULTICAST_ADD:
828 		update = hash_add(priv, mac_addr);
829 		break;
830 	case EMAC_MULTICAST_DEL:
831 		update = hash_del(priv, mac_addr);
832 		break;
833 	case EMAC_ALL_MULTI_SET:
834 		update = 1;
835 		priv->mac_hash1 = EMAC_ALL_MULTI_REG_VALUE;
836 		priv->mac_hash2 = EMAC_ALL_MULTI_REG_VALUE;
837 		break;
838 	case EMAC_ALL_MULTI_CLR:
839 		update = 1;
840 		priv->mac_hash1 = 0;
841 		priv->mac_hash2 = 0;
842 		memset(&(priv->multicast_hash_cnt[0]), 0,
843 		sizeof(priv->multicast_hash_cnt[0]) *
844 		       EMAC_NUM_MULTICAST_BITS);
845 		break;
846 	default:
847 		if (netif_msg_drv(priv))
848 			dev_err(emac_dev, "DaVinci EMAC: add_mcast"\
849 				": bad operation %d", action);
850 		break;
851 	}
852 
853 	/* write to the hardware only if the register status chances */
854 	if (update > 0) {
855 		emac_write(EMAC_MACHASH1, priv->mac_hash1);
856 		emac_write(EMAC_MACHASH2, priv->mac_hash2);
857 	}
858 }
859 
860 /**
861  * emac_dev_mcast_set - Set multicast address in the EMAC adapter
862  * @ndev: The DaVinci EMAC network adapter
863  *
864  * Set multicast addresses in EMAC adapter
865  *
866  */
867 static void emac_dev_mcast_set(struct net_device *ndev)
868 {
869 	u32 mbp_enable;
870 	struct emac_priv *priv = netdev_priv(ndev);
871 
872 	mbp_enable = emac_read(EMAC_RXMBPENABLE);
873 	if (ndev->flags & IFF_PROMISC) {
874 		mbp_enable &= (~EMAC_MBP_PROMISCCH(EMAC_DEF_PROM_CH));
875 		mbp_enable |= (EMAC_MBP_RXPROMISC);
876 	} else {
877 		mbp_enable = (mbp_enable & ~EMAC_MBP_RXPROMISC);
878 		if ((ndev->flags & IFF_ALLMULTI) ||
879 		    netdev_mc_count(ndev) > EMAC_DEF_MAX_MULTICAST_ADDRESSES) {
880 			mbp_enable = (mbp_enable | EMAC_MBP_RXMCAST);
881 			emac_add_mcast(priv, EMAC_ALL_MULTI_SET, NULL);
882 		} else if (!netdev_mc_empty(ndev)) {
883 			struct netdev_hw_addr *ha;
884 
885 			mbp_enable = (mbp_enable | EMAC_MBP_RXMCAST);
886 			emac_add_mcast(priv, EMAC_ALL_MULTI_CLR, NULL);
887 			/* program multicast address list into EMAC hardware */
888 			netdev_for_each_mc_addr(ha, ndev) {
889 				emac_add_mcast(priv, EMAC_MULTICAST_ADD,
890 					       (u8 *) ha->addr);
891 			}
892 		} else {
893 			mbp_enable = (mbp_enable & ~EMAC_MBP_RXMCAST);
894 			emac_add_mcast(priv, EMAC_ALL_MULTI_CLR, NULL);
895 		}
896 	}
897 	/* Set mbp config register */
898 	emac_write(EMAC_RXMBPENABLE, mbp_enable);
899 }
900 
901 /*************************************************************************
902  *  EMAC Hardware manipulation
903  *************************************************************************/
904 
905 /**
906  * emac_int_disable - Disable EMAC module interrupt (from adapter)
907  * @priv: The DaVinci EMAC private adapter structure
908  *
909  * Disable EMAC interrupt on the adapter
910  *
911  */
912 static void emac_int_disable(struct emac_priv *priv)
913 {
914 	if (priv->version == EMAC_VERSION_2) {
915 		unsigned long flags;
916 
917 		local_irq_save(flags);
918 
919 		/* Program C0_Int_En to zero to turn off
920 		* interrupts to the CPU */
921 		emac_ctrl_write(EMAC_DM646X_CMRXINTEN, 0x0);
922 		emac_ctrl_write(EMAC_DM646X_CMTXINTEN, 0x0);
923 		/* NOTE: Rx Threshold and Misc interrupts are not disabled */
924 		if (priv->int_disable)
925 			priv->int_disable();
926 
927 		/* NOTE: Rx Threshold and Misc interrupts are not enabled */
928 
929 		/* ack rxen only then a new pulse will be generated */
930 		emac_write(EMAC_DM646X_MACEOIVECTOR,
931 			EMAC_DM646X_MAC_EOI_C0_RXEN);
932 
933 		/* ack txen- only then a new pulse will be generated */
934 		emac_write(EMAC_DM646X_MACEOIVECTOR,
935 			EMAC_DM646X_MAC_EOI_C0_TXEN);
936 
937 		local_irq_restore(flags);
938 
939 	} else {
940 		/* Set DM644x control registers for interrupt control */
941 		emac_ctrl_write(EMAC_CTRL_EWCTL, 0x0);
942 	}
943 }
944 
945 /**
946  * emac_int_enable - Enable EMAC module interrupt (from adapter)
947  * @priv: The DaVinci EMAC private adapter structure
948  *
949  * Enable EMAC interrupt on the adapter
950  *
951  */
952 static void emac_int_enable(struct emac_priv *priv)
953 {
954 	if (priv->version == EMAC_VERSION_2) {
955 		if (priv->int_enable)
956 			priv->int_enable();
957 
958 		emac_ctrl_write(EMAC_DM646X_CMRXINTEN, 0xff);
959 		emac_ctrl_write(EMAC_DM646X_CMTXINTEN, 0xff);
960 
961 		/* In addition to turning on interrupt Enable, we need
962 		 * ack by writing appropriate values to the EOI
963 		 * register */
964 
965 		/* NOTE: Rx Threshold and Misc interrupts are not enabled */
966 	} else {
967 		/* Set DM644x control registers for interrupt control */
968 		emac_ctrl_write(EMAC_CTRL_EWCTL, 0x1);
969 	}
970 }
971 
972 /**
973  * emac_irq - EMAC interrupt handler
974  * @irq: interrupt number
975  * @dev_id: EMAC network adapter data structure ptr
976  *
977  * EMAC Interrupt handler - we only schedule NAPI and not process any packets
978  * here. EVen the interrupt status is checked (TX/RX/Err) in NAPI poll function
979  *
980  * Returns interrupt handled condition
981  */
982 static irqreturn_t emac_irq(int irq, void *dev_id)
983 {
984 	struct net_device *ndev = (struct net_device *)dev_id;
985 	struct emac_priv *priv = netdev_priv(ndev);
986 
987 	++priv->isr_count;
988 	if (likely(netif_running(priv->ndev))) {
989 		emac_int_disable(priv);
990 		napi_schedule(&priv->napi);
991 	} else {
992 		/* we are closing down, so dont process anything */
993 	}
994 	return IRQ_HANDLED;
995 }
996 
997 static struct sk_buff *emac_rx_alloc(struct emac_priv *priv)
998 {
999 	struct sk_buff *skb = netdev_alloc_skb(priv->ndev, priv->rx_buf_size);
1000 	if (WARN_ON(!skb))
1001 		return NULL;
1002 	skb_reserve(skb, NET_IP_ALIGN);
1003 	return skb;
1004 }
1005 
1006 static void emac_rx_handler(void *token, int len, int status)
1007 {
1008 	struct sk_buff		*skb = token;
1009 	struct net_device	*ndev = skb->dev;
1010 	struct emac_priv	*priv = netdev_priv(ndev);
1011 	struct device		*emac_dev = &ndev->dev;
1012 	int			ret;
1013 
1014 	/* free and bail if we are shutting down */
1015 	if (unlikely(!netif_running(ndev))) {
1016 		dev_kfree_skb_any(skb);
1017 		return;
1018 	}
1019 
1020 	/* recycle on receive error */
1021 	if (status < 0) {
1022 		ndev->stats.rx_errors++;
1023 		goto recycle;
1024 	}
1025 
1026 	/* feed received packet up the stack */
1027 	skb_put(skb, len);
1028 	skb->protocol = eth_type_trans(skb, ndev);
1029 	netif_receive_skb(skb);
1030 	ndev->stats.rx_bytes += len;
1031 	ndev->stats.rx_packets++;
1032 
1033 	/* alloc a new packet for receive */
1034 	skb = emac_rx_alloc(priv);
1035 	if (!skb) {
1036 		if (netif_msg_rx_err(priv) && net_ratelimit())
1037 			dev_err(emac_dev, "failed rx buffer alloc\n");
1038 		return;
1039 	}
1040 
1041 recycle:
1042 	ret = cpdma_chan_submit(priv->rxchan, skb, skb->data,
1043 			skb_tailroom(skb), 0);
1044 
1045 	WARN_ON(ret == -ENOMEM);
1046 	if (unlikely(ret < 0))
1047 		dev_kfree_skb_any(skb);
1048 }
1049 
1050 static void emac_tx_handler(void *token, int len, int status)
1051 {
1052 	struct sk_buff		*skb = token;
1053 	struct net_device	*ndev = skb->dev;
1054 
1055 	/* Check whether the queue is stopped due to stalled tx dma, if the
1056 	 * queue is stopped then start the queue as we have free desc for tx
1057 	 */
1058 	if (unlikely(netif_queue_stopped(ndev)))
1059 		netif_wake_queue(ndev);
1060 	ndev->stats.tx_packets++;
1061 	ndev->stats.tx_bytes += len;
1062 	dev_kfree_skb_any(skb);
1063 }
1064 
1065 /**
1066  * emac_dev_xmit - EMAC Transmit function
1067  * @skb: SKB pointer
1068  * @ndev: The DaVinci EMAC network adapter
1069  *
1070  * Called by the system to transmit a packet  - we queue the packet in
1071  * EMAC hardware transmit queue
1072  *
1073  * Returns success(NETDEV_TX_OK) or error code (typically out of desc's)
1074  */
1075 static int emac_dev_xmit(struct sk_buff *skb, struct net_device *ndev)
1076 {
1077 	struct device *emac_dev = &ndev->dev;
1078 	int ret_code;
1079 	struct emac_priv *priv = netdev_priv(ndev);
1080 
1081 	/* If no link, return */
1082 	if (unlikely(!priv->link)) {
1083 		if (netif_msg_tx_err(priv) && net_ratelimit())
1084 			dev_err(emac_dev, "DaVinci EMAC: No link to transmit");
1085 		goto fail_tx;
1086 	}
1087 
1088 	ret_code = skb_padto(skb, EMAC_DEF_MIN_ETHPKTSIZE);
1089 	if (unlikely(ret_code < 0)) {
1090 		if (netif_msg_tx_err(priv) && net_ratelimit())
1091 			dev_err(emac_dev, "DaVinci EMAC: packet pad failed");
1092 		goto fail_tx;
1093 	}
1094 
1095 	skb_tx_timestamp(skb);
1096 
1097 	ret_code = cpdma_chan_submit(priv->txchan, skb, skb->data, skb->len,
1098 				     0);
1099 	if (unlikely(ret_code != 0)) {
1100 		if (netif_msg_tx_err(priv) && net_ratelimit())
1101 			dev_err(emac_dev, "DaVinci EMAC: desc submit failed");
1102 		goto fail_tx;
1103 	}
1104 
1105 	/* If there is no more tx desc left free then we need to
1106 	 * tell the kernel to stop sending us tx frames.
1107 	 */
1108 	if (unlikely(!cpdma_check_free_tx_desc(priv->txchan)))
1109 		netif_stop_queue(ndev);
1110 
1111 	return NETDEV_TX_OK;
1112 
1113 fail_tx:
1114 	ndev->stats.tx_dropped++;
1115 	netif_stop_queue(ndev);
1116 	return NETDEV_TX_BUSY;
1117 }
1118 
1119 /**
1120  * emac_dev_tx_timeout - EMAC Transmit timeout function
1121  * @ndev: The DaVinci EMAC network adapter
1122  *
1123  * Called when system detects that a skb timeout period has expired
1124  * potentially due to a fault in the adapter in not being able to send
1125  * it out on the wire. We teardown the TX channel assuming a hardware
1126  * error and re-initialize the TX channel for hardware operation
1127  *
1128  */
1129 static void emac_dev_tx_timeout(struct net_device *ndev)
1130 {
1131 	struct emac_priv *priv = netdev_priv(ndev);
1132 	struct device *emac_dev = &ndev->dev;
1133 
1134 	if (netif_msg_tx_err(priv))
1135 		dev_err(emac_dev, "DaVinci EMAC: xmit timeout, restarting TX");
1136 
1137 	emac_dump_regs(priv);
1138 
1139 	ndev->stats.tx_errors++;
1140 	emac_int_disable(priv);
1141 	cpdma_chan_stop(priv->txchan);
1142 	cpdma_chan_start(priv->txchan);
1143 	emac_int_enable(priv);
1144 }
1145 
1146 /**
1147  * emac_set_type0addr - Set EMAC Type0 mac address
1148  * @priv: The DaVinci EMAC private adapter structure
1149  * @ch: RX channel number
1150  * @mac_addr: MAC address to set in device
1151  *
1152  * Called internally to set Type0 mac address of the adapter (Device)
1153  *
1154  * Returns success (0) or appropriate error code (none as of now)
1155  */
1156 static void emac_set_type0addr(struct emac_priv *priv, u32 ch, char *mac_addr)
1157 {
1158 	u32 val;
1159 	val = ((mac_addr[5] << 8) | (mac_addr[4]));
1160 	emac_write(EMAC_MACSRCADDRLO, val);
1161 
1162 	val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \
1163 	       (mac_addr[1] << 8) | (mac_addr[0]));
1164 	emac_write(EMAC_MACSRCADDRHI, val);
1165 	val = emac_read(EMAC_RXUNICASTSET);
1166 	val |= BIT(ch);
1167 	emac_write(EMAC_RXUNICASTSET, val);
1168 	val = emac_read(EMAC_RXUNICASTCLEAR);
1169 	val &= ~BIT(ch);
1170 	emac_write(EMAC_RXUNICASTCLEAR, val);
1171 }
1172 
1173 /**
1174  * emac_set_type1addr - Set EMAC Type1 mac address
1175  * @priv: The DaVinci EMAC private adapter structure
1176  * @ch: RX channel number
1177  * @mac_addr: MAC address to set in device
1178  *
1179  * Called internally to set Type1 mac address of the adapter (Device)
1180  *
1181  * Returns success (0) or appropriate error code (none as of now)
1182  */
1183 static void emac_set_type1addr(struct emac_priv *priv, u32 ch, char *mac_addr)
1184 {
1185 	u32 val;
1186 	emac_write(EMAC_MACINDEX, ch);
1187 	val = ((mac_addr[5] << 8) | mac_addr[4]);
1188 	emac_write(EMAC_MACADDRLO, val);
1189 	val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \
1190 	       (mac_addr[1] << 8) | (mac_addr[0]));
1191 	emac_write(EMAC_MACADDRHI, val);
1192 	emac_set_type0addr(priv, ch, mac_addr);
1193 }
1194 
1195 /**
1196  * emac_set_type2addr - Set EMAC Type2 mac address
1197  * @priv: The DaVinci EMAC private adapter structure
1198  * @ch: RX channel number
1199  * @mac_addr: MAC address to set in device
1200  * @index: index into RX address entries
1201  * @match: match parameter for RX address matching logic
1202  *
1203  * Called internally to set Type2 mac address of the adapter (Device)
1204  *
1205  * Returns success (0) or appropriate error code (none as of now)
1206  */
1207 static void emac_set_type2addr(struct emac_priv *priv, u32 ch,
1208 			       char *mac_addr, int index, int match)
1209 {
1210 	u32 val;
1211 	emac_write(EMAC_MACINDEX, index);
1212 	val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \
1213 	       (mac_addr[1] << 8) | (mac_addr[0]));
1214 	emac_write(EMAC_MACADDRHI, val);
1215 	val = ((mac_addr[5] << 8) | mac_addr[4] | ((ch & 0x7) << 16) | \
1216 	       (match << 19) | BIT(20));
1217 	emac_write(EMAC_MACADDRLO, val);
1218 	emac_set_type0addr(priv, ch, mac_addr);
1219 }
1220 
1221 /**
1222  * emac_setmac - Set mac address in the adapter (internal function)
1223  * @priv: The DaVinci EMAC private adapter structure
1224  * @ch: RX channel number
1225  * @mac_addr: MAC address to set in device
1226  *
1227  * Called internally to set the mac address of the adapter (Device)
1228  *
1229  * Returns success (0) or appropriate error code (none as of now)
1230  */
1231 static void emac_setmac(struct emac_priv *priv, u32 ch, char *mac_addr)
1232 {
1233 	struct device *emac_dev = &priv->ndev->dev;
1234 
1235 	if (priv->rx_addr_type == 0) {
1236 		emac_set_type0addr(priv, ch, mac_addr);
1237 	} else if (priv->rx_addr_type == 1) {
1238 		u32 cnt;
1239 		for (cnt = 0; cnt < EMAC_MAX_TXRX_CHANNELS; cnt++)
1240 			emac_set_type1addr(priv, ch, mac_addr);
1241 	} else if (priv->rx_addr_type == 2) {
1242 		emac_set_type2addr(priv, ch, mac_addr, ch, 1);
1243 		emac_set_type0addr(priv, ch, mac_addr);
1244 	} else {
1245 		if (netif_msg_drv(priv))
1246 			dev_err(emac_dev, "DaVinci EMAC: Wrong addressing\n");
1247 	}
1248 }
1249 
1250 /**
1251  * emac_dev_setmac_addr - Set mac address in the adapter
1252  * @ndev: The DaVinci EMAC network adapter
1253  * @addr: MAC address to set in device
1254  *
1255  * Called by the system to set the mac address of the adapter (Device)
1256  *
1257  * Returns success (0) or appropriate error code (none as of now)
1258  */
1259 static int emac_dev_setmac_addr(struct net_device *ndev, void *addr)
1260 {
1261 	struct emac_priv *priv = netdev_priv(ndev);
1262 	struct device *emac_dev = &priv->ndev->dev;
1263 	struct sockaddr *sa = addr;
1264 
1265 	if (!is_valid_ether_addr(sa->sa_data))
1266 		return -EADDRNOTAVAIL;
1267 
1268 	/* Store mac addr in priv and rx channel and set it in EMAC hw */
1269 	memcpy(priv->mac_addr, sa->sa_data, ndev->addr_len);
1270 	memcpy(ndev->dev_addr, sa->sa_data, ndev->addr_len);
1271 
1272 	/* MAC address is configured only after the interface is enabled. */
1273 	if (netif_running(ndev)) {
1274 		emac_setmac(priv, EMAC_DEF_RX_CH, priv->mac_addr);
1275 	}
1276 
1277 	if (netif_msg_drv(priv))
1278 		dev_notice(emac_dev, "DaVinci EMAC: emac_dev_setmac_addr %pM\n",
1279 					priv->mac_addr);
1280 
1281 	return 0;
1282 }
1283 
1284 /**
1285  * emac_hw_enable - Enable EMAC hardware for packet transmission/reception
1286  * @priv: The DaVinci EMAC private adapter structure
1287  *
1288  * Enables EMAC hardware for packet processing - enables PHY, enables RX
1289  * for packet reception and enables device interrupts and then NAPI
1290  *
1291  * Returns success (0) or appropriate error code (none right now)
1292  */
1293 static int emac_hw_enable(struct emac_priv *priv)
1294 {
1295 	u32 val, mbp_enable, mac_control;
1296 
1297 	/* Soft reset */
1298 	emac_write(EMAC_SOFTRESET, 1);
1299 	while (emac_read(EMAC_SOFTRESET))
1300 		cpu_relax();
1301 
1302 	/* Disable interrupt & Set pacing for more interrupts initially */
1303 	emac_int_disable(priv);
1304 
1305 	/* Full duplex enable bit set when auto negotiation happens */
1306 	mac_control =
1307 		(((EMAC_DEF_TXPRIO_FIXED) ? (EMAC_MACCONTROL_TXPTYPE) : 0x0) |
1308 		((priv->speed == 1000) ? EMAC_MACCONTROL_GIGABITEN : 0x0) |
1309 		((EMAC_DEF_TXPACING_EN) ? (EMAC_MACCONTROL_TXPACEEN) : 0x0) |
1310 		((priv->duplex == DUPLEX_FULL) ? 0x1 : 0));
1311 	emac_write(EMAC_MACCONTROL, mac_control);
1312 
1313 	mbp_enable =
1314 		(((EMAC_DEF_PASS_CRC) ? (EMAC_RXMBP_PASSCRC_MASK) : 0x0) |
1315 		((EMAC_DEF_QOS_EN) ? (EMAC_RXMBP_QOSEN_MASK) : 0x0) |
1316 		 ((EMAC_DEF_NO_BUFF_CHAIN) ? (EMAC_RXMBP_NOCHAIN_MASK) : 0x0) |
1317 		 ((EMAC_DEF_MACCTRL_FRAME_EN) ? (EMAC_RXMBP_CMFEN_MASK) : 0x0) |
1318 		 ((EMAC_DEF_SHORT_FRAME_EN) ? (EMAC_RXMBP_CSFEN_MASK) : 0x0) |
1319 		 ((EMAC_DEF_ERROR_FRAME_EN) ? (EMAC_RXMBP_CEFEN_MASK) : 0x0) |
1320 		 ((EMAC_DEF_PROM_EN) ? (EMAC_RXMBP_CAFEN_MASK) : 0x0) |
1321 		 ((EMAC_DEF_PROM_CH & EMAC_RXMBP_CHMASK) << \
1322 			EMAC_RXMBP_PROMCH_SHIFT) |
1323 		 ((EMAC_DEF_BCAST_EN) ? (EMAC_RXMBP_BROADEN_MASK) : 0x0) |
1324 		 ((EMAC_DEF_BCAST_CH & EMAC_RXMBP_CHMASK) << \
1325 			EMAC_RXMBP_BROADCH_SHIFT) |
1326 		 ((EMAC_DEF_MCAST_EN) ? (EMAC_RXMBP_MULTIEN_MASK) : 0x0) |
1327 		 ((EMAC_DEF_MCAST_CH & EMAC_RXMBP_CHMASK) << \
1328 			EMAC_RXMBP_MULTICH_SHIFT));
1329 	emac_write(EMAC_RXMBPENABLE, mbp_enable);
1330 	emac_write(EMAC_RXMAXLEN, (EMAC_DEF_MAX_FRAME_SIZE &
1331 				   EMAC_RX_MAX_LEN_MASK));
1332 	emac_write(EMAC_RXBUFFEROFFSET, (EMAC_DEF_BUFFER_OFFSET &
1333 					 EMAC_RX_BUFFER_OFFSET_MASK));
1334 	emac_write(EMAC_RXFILTERLOWTHRESH, 0);
1335 	emac_write(EMAC_RXUNICASTCLEAR, EMAC_RX_UNICAST_CLEAR_ALL);
1336 	priv->rx_addr_type = (emac_read(EMAC_MACCONFIG) >> 8) & 0xFF;
1337 
1338 	emac_write(EMAC_MACINTMASKSET, EMAC_MAC_HOST_ERR_INTMASK_VAL);
1339 
1340 	emac_setmac(priv, EMAC_DEF_RX_CH, priv->mac_addr);
1341 
1342 	/* Enable MII */
1343 	val = emac_read(EMAC_MACCONTROL);
1344 	val |= (EMAC_MACCONTROL_GMIIEN);
1345 	emac_write(EMAC_MACCONTROL, val);
1346 
1347 	/* Enable NAPI and interrupts */
1348 	napi_enable(&priv->napi);
1349 	emac_int_enable(priv);
1350 	return 0;
1351 
1352 }
1353 
1354 /**
1355  * emac_poll - EMAC NAPI Poll function
1356  * @ndev: The DaVinci EMAC network adapter
1357  * @budget: Number of receive packets to process (as told by NAPI layer)
1358  *
1359  * NAPI Poll function implemented to process packets as per budget. We check
1360  * the type of interrupt on the device and accordingly call the TX or RX
1361  * packet processing functions. We follow the budget for RX processing and
1362  * also put a cap on number of TX pkts processed through config param. The
1363  * NAPI schedule function is called if more packets pending.
1364  *
1365  * Returns number of packets received (in most cases; else TX pkts - rarely)
1366  */
1367 static int emac_poll(struct napi_struct *napi, int budget)
1368 {
1369 	unsigned int mask;
1370 	struct emac_priv *priv = container_of(napi, struct emac_priv, napi);
1371 	struct net_device *ndev = priv->ndev;
1372 	struct device *emac_dev = &ndev->dev;
1373 	u32 status = 0;
1374 	u32 num_tx_pkts = 0, num_rx_pkts = 0;
1375 
1376 	/* Check interrupt vectors and call packet processing */
1377 	status = emac_read(EMAC_MACINVECTOR);
1378 
1379 	mask = EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC;
1380 
1381 	if (priv->version == EMAC_VERSION_2)
1382 		mask = EMAC_DM646X_MAC_IN_VECTOR_TX_INT_VEC;
1383 
1384 	if (status & mask) {
1385 		num_tx_pkts = cpdma_chan_process(priv->txchan,
1386 					      EMAC_DEF_TX_MAX_SERVICE);
1387 	} /* TX processing */
1388 
1389 	mask = EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC;
1390 
1391 	if (priv->version == EMAC_VERSION_2)
1392 		mask = EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC;
1393 
1394 	if (status & mask) {
1395 		num_rx_pkts = cpdma_chan_process(priv->rxchan, budget);
1396 	} /* RX processing */
1397 
1398 	mask = EMAC_DM644X_MAC_IN_VECTOR_HOST_INT;
1399 	if (priv->version == EMAC_VERSION_2)
1400 		mask = EMAC_DM646X_MAC_IN_VECTOR_HOST_INT;
1401 
1402 	if (unlikely(status & mask)) {
1403 		u32 ch, cause;
1404 		dev_err(emac_dev, "DaVinci EMAC: Fatal Hardware Error\n");
1405 		netif_stop_queue(ndev);
1406 		napi_disable(&priv->napi);
1407 
1408 		status = emac_read(EMAC_MACSTATUS);
1409 		cause = ((status & EMAC_MACSTATUS_TXERRCODE_MASK) >>
1410 			 EMAC_MACSTATUS_TXERRCODE_SHIFT);
1411 		if (cause) {
1412 			ch = ((status & EMAC_MACSTATUS_TXERRCH_MASK) >>
1413 			      EMAC_MACSTATUS_TXERRCH_SHIFT);
1414 			if (net_ratelimit()) {
1415 				dev_err(emac_dev, "TX Host error %s on ch=%d\n",
1416 					&emac_txhost_errcodes[cause][0], ch);
1417 			}
1418 		}
1419 		cause = ((status & EMAC_MACSTATUS_RXERRCODE_MASK) >>
1420 			 EMAC_MACSTATUS_RXERRCODE_SHIFT);
1421 		if (cause) {
1422 			ch = ((status & EMAC_MACSTATUS_RXERRCH_MASK) >>
1423 			      EMAC_MACSTATUS_RXERRCH_SHIFT);
1424 			if (netif_msg_hw(priv) && net_ratelimit())
1425 				dev_err(emac_dev, "RX Host error %s on ch=%d\n",
1426 					&emac_rxhost_errcodes[cause][0], ch);
1427 		}
1428 	} else if (num_rx_pkts < budget) {
1429 		napi_complete(napi);
1430 		emac_int_enable(priv);
1431 	}
1432 
1433 	return num_rx_pkts;
1434 }
1435 
1436 #ifdef CONFIG_NET_POLL_CONTROLLER
1437 /**
1438  * emac_poll_controller - EMAC Poll controller function
1439  * @ndev: The DaVinci EMAC network adapter
1440  *
1441  * Polled functionality used by netconsole and others in non interrupt mode
1442  *
1443  */
1444 static void emac_poll_controller(struct net_device *ndev)
1445 {
1446 	struct emac_priv *priv = netdev_priv(ndev);
1447 
1448 	emac_int_disable(priv);
1449 	emac_irq(ndev->irq, ndev);
1450 	emac_int_enable(priv);
1451 }
1452 #endif
1453 
1454 static void emac_adjust_link(struct net_device *ndev)
1455 {
1456 	struct emac_priv *priv = netdev_priv(ndev);
1457 	struct phy_device *phydev = priv->phydev;
1458 	unsigned long flags;
1459 	int new_state = 0;
1460 
1461 	spin_lock_irqsave(&priv->lock, flags);
1462 
1463 	if (phydev->link) {
1464 		/* check the mode of operation - full/half duplex */
1465 		if (phydev->duplex != priv->duplex) {
1466 			new_state = 1;
1467 			priv->duplex = phydev->duplex;
1468 		}
1469 		if (phydev->speed != priv->speed) {
1470 			new_state = 1;
1471 			priv->speed = phydev->speed;
1472 		}
1473 		if (!priv->link) {
1474 			new_state = 1;
1475 			priv->link = 1;
1476 		}
1477 
1478 	} else if (priv->link) {
1479 		new_state = 1;
1480 		priv->link = 0;
1481 		priv->speed = 0;
1482 		priv->duplex = ~0;
1483 	}
1484 	if (new_state) {
1485 		emac_update_phystatus(priv);
1486 		phy_print_status(priv->phydev);
1487 	}
1488 
1489 	spin_unlock_irqrestore(&priv->lock, flags);
1490 }
1491 
1492 /*************************************************************************
1493  *  Linux Driver Model
1494  *************************************************************************/
1495 
1496 /**
1497  * emac_devioctl - EMAC adapter ioctl
1498  * @ndev: The DaVinci EMAC network adapter
1499  * @ifrq: request parameter
1500  * @cmd: command parameter
1501  *
1502  * EMAC driver ioctl function
1503  *
1504  * Returns success(0) or appropriate error code
1505  */
1506 static int emac_devioctl(struct net_device *ndev, struct ifreq *ifrq, int cmd)
1507 {
1508 	struct emac_priv *priv = netdev_priv(ndev);
1509 
1510 	if (!(netif_running(ndev)))
1511 		return -EINVAL;
1512 
1513 	/* TODO: Add phy read and write and private statistics get feature */
1514 
1515 	if (priv->phydev)
1516 		return phy_mii_ioctl(priv->phydev, ifrq, cmd);
1517 	else
1518 		return -EOPNOTSUPP;
1519 }
1520 
1521 static int match_first_device(struct device *dev, void *data)
1522 {
1523 	return !strncmp(dev_name(dev), "davinci_mdio", 12);
1524 }
1525 
1526 /**
1527  * emac_dev_open - EMAC device open
1528  * @ndev: The DaVinci EMAC network adapter
1529  *
1530  * Called when system wants to start the interface. We init TX/RX channels
1531  * and enable the hardware for packet reception/transmission and start the
1532  * network queue.
1533  *
1534  * Returns 0 for a successful open, or appropriate error code
1535  */
1536 static int emac_dev_open(struct net_device *ndev)
1537 {
1538 	struct device *emac_dev = &ndev->dev;
1539 	u32 cnt;
1540 	struct resource *res;
1541 	int q, m, ret;
1542 	int res_num = 0, irq_num = 0;
1543 	int i = 0;
1544 	struct emac_priv *priv = netdev_priv(ndev);
1545 
1546 	ret = pm_runtime_get_sync(&priv->pdev->dev);
1547 	if (ret < 0) {
1548 		pm_runtime_put_noidle(&priv->pdev->dev);
1549 		dev_err(&priv->pdev->dev, "%s: failed to get_sync(%d)\n",
1550 			__func__, ret);
1551 		return ret;
1552 	}
1553 
1554 	netif_carrier_off(ndev);
1555 	for (cnt = 0; cnt < ETH_ALEN; cnt++)
1556 		ndev->dev_addr[cnt] = priv->mac_addr[cnt];
1557 
1558 	/* Configuration items */
1559 	priv->rx_buf_size = EMAC_DEF_MAX_FRAME_SIZE + NET_IP_ALIGN;
1560 
1561 	priv->mac_hash1 = 0;
1562 	priv->mac_hash2 = 0;
1563 	emac_write(EMAC_MACHASH1, 0);
1564 	emac_write(EMAC_MACHASH2, 0);
1565 
1566 	for (i = 0; i < EMAC_DEF_RX_NUM_DESC; i++) {
1567 		struct sk_buff *skb = emac_rx_alloc(priv);
1568 
1569 		if (!skb)
1570 			break;
1571 
1572 		ret = cpdma_chan_submit(priv->rxchan, skb, skb->data,
1573 					skb_tailroom(skb), 0);
1574 		if (WARN_ON(ret < 0))
1575 			break;
1576 	}
1577 
1578 	/* Request IRQ */
1579 	while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ,
1580 					    res_num))) {
1581 		for (irq_num = res->start; irq_num <= res->end; irq_num++) {
1582 			if (request_irq(irq_num, emac_irq, 0, ndev->name,
1583 					ndev)) {
1584 				dev_err(emac_dev,
1585 					"DaVinci EMAC: request_irq() failed\n");
1586 				ret = -EBUSY;
1587 
1588 				goto rollback;
1589 			}
1590 		}
1591 		res_num++;
1592 	}
1593 	/* prepare counters for rollback in case of an error */
1594 	res_num--;
1595 	irq_num--;
1596 
1597 	/* Start/Enable EMAC hardware */
1598 	emac_hw_enable(priv);
1599 
1600 	/* Enable Interrupt pacing if configured */
1601 	if (priv->coal_intvl != 0) {
1602 		struct ethtool_coalesce coal;
1603 
1604 		coal.rx_coalesce_usecs = (priv->coal_intvl << 4);
1605 		emac_set_coalesce(ndev, &coal);
1606 	}
1607 
1608 	cpdma_ctlr_start(priv->dma);
1609 
1610 	priv->phydev = NULL;
1611 
1612 	if (priv->phy_node) {
1613 		priv->phydev = of_phy_connect(ndev, priv->phy_node,
1614 					      &emac_adjust_link, 0, 0);
1615 		if (!priv->phydev) {
1616 			dev_err(emac_dev, "could not connect to phy %s\n",
1617 				priv->phy_node->full_name);
1618 			ret = -ENODEV;
1619 			goto err;
1620 		}
1621 	}
1622 
1623 	/* use the first phy on the bus if pdata did not give us a phy id */
1624 	if (!priv->phydev && !priv->phy_id) {
1625 		struct device *phy;
1626 
1627 		phy = bus_find_device(&mdio_bus_type, NULL, NULL,
1628 				      match_first_device);
1629 		if (phy)
1630 			priv->phy_id = dev_name(phy);
1631 	}
1632 
1633 	if (!priv->phydev && priv->phy_id && *priv->phy_id) {
1634 		priv->phydev = phy_connect(ndev, priv->phy_id,
1635 					   &emac_adjust_link,
1636 					   PHY_INTERFACE_MODE_MII);
1637 
1638 		if (IS_ERR(priv->phydev)) {
1639 			dev_err(emac_dev, "could not connect to phy %s\n",
1640 				priv->phy_id);
1641 			ret = PTR_ERR(priv->phydev);
1642 			priv->phydev = NULL;
1643 			goto err;
1644 		}
1645 
1646 		priv->link = 0;
1647 		priv->speed = 0;
1648 		priv->duplex = ~0;
1649 
1650 		phy_attached_info(priv->phydev);
1651 	}
1652 
1653 	if (!priv->phydev) {
1654 		/* No PHY , fix the link, speed and duplex settings */
1655 		dev_notice(emac_dev, "no phy, defaulting to 100/full\n");
1656 		priv->link = 1;
1657 		priv->speed = SPEED_100;
1658 		priv->duplex = DUPLEX_FULL;
1659 		emac_update_phystatus(priv);
1660 	}
1661 
1662 	if (!netif_running(ndev)) /* debug only - to avoid compiler warning */
1663 		emac_dump_regs(priv);
1664 
1665 	if (netif_msg_drv(priv))
1666 		dev_notice(emac_dev, "DaVinci EMAC: Opened %s\n", ndev->name);
1667 
1668 	if (priv->phydev)
1669 		phy_start(priv->phydev);
1670 
1671 	return 0;
1672 
1673 err:
1674 	emac_int_disable(priv);
1675 	napi_disable(&priv->napi);
1676 
1677 rollback:
1678 	for (q = res_num; q >= 0; q--) {
1679 		res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, q);
1680 		/* at the first iteration, irq_num is already set to the
1681 		 * right value
1682 		 */
1683 		if (q != res_num)
1684 			irq_num = res->end;
1685 
1686 		for (m = irq_num; m >= res->start; m--)
1687 			free_irq(m, ndev);
1688 	}
1689 	cpdma_ctlr_stop(priv->dma);
1690 	pm_runtime_put(&priv->pdev->dev);
1691 	return ret;
1692 }
1693 
1694 /**
1695  * emac_dev_stop - EMAC device stop
1696  * @ndev: The DaVinci EMAC network adapter
1697  *
1698  * Called when system wants to stop or down the interface. We stop the network
1699  * queue, disable interrupts and cleanup TX/RX channels.
1700  *
1701  * We return the statistics in net_device_stats structure pulled from emac
1702  */
1703 static int emac_dev_stop(struct net_device *ndev)
1704 {
1705 	struct resource *res;
1706 	int i = 0;
1707 	int irq_num;
1708 	struct emac_priv *priv = netdev_priv(ndev);
1709 	struct device *emac_dev = &ndev->dev;
1710 
1711 	/* inform the upper layers. */
1712 	netif_stop_queue(ndev);
1713 	napi_disable(&priv->napi);
1714 
1715 	netif_carrier_off(ndev);
1716 	emac_int_disable(priv);
1717 	cpdma_ctlr_stop(priv->dma);
1718 	emac_write(EMAC_SOFTRESET, 1);
1719 
1720 	if (priv->phydev)
1721 		phy_disconnect(priv->phydev);
1722 
1723 	/* Free IRQ */
1724 	while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, i))) {
1725 		for (irq_num = res->start; irq_num <= res->end; irq_num++)
1726 			free_irq(irq_num, priv->ndev);
1727 		i++;
1728 	}
1729 
1730 	if (netif_msg_drv(priv))
1731 		dev_notice(emac_dev, "DaVinci EMAC: %s stopped\n", ndev->name);
1732 
1733 	pm_runtime_put(&priv->pdev->dev);
1734 	return 0;
1735 }
1736 
1737 /**
1738  * emac_dev_getnetstats - EMAC get statistics function
1739  * @ndev: The DaVinci EMAC network adapter
1740  *
1741  * Called when system wants to get statistics from the device.
1742  *
1743  * We return the statistics in net_device_stats structure pulled from emac
1744  */
1745 static struct net_device_stats *emac_dev_getnetstats(struct net_device *ndev)
1746 {
1747 	struct emac_priv *priv = netdev_priv(ndev);
1748 	u32 mac_control;
1749 	u32 stats_clear_mask;
1750 	int err;
1751 
1752 	err = pm_runtime_get_sync(&priv->pdev->dev);
1753 	if (err < 0) {
1754 		pm_runtime_put_noidle(&priv->pdev->dev);
1755 		dev_err(&priv->pdev->dev, "%s: failed to get_sync(%d)\n",
1756 			__func__, err);
1757 		return &ndev->stats;
1758 	}
1759 
1760 	/* update emac hardware stats and reset the registers*/
1761 
1762 	mac_control = emac_read(EMAC_MACCONTROL);
1763 
1764 	if (mac_control & EMAC_MACCONTROL_GMIIEN)
1765 		stats_clear_mask = EMAC_STATS_CLR_MASK;
1766 	else
1767 		stats_clear_mask = 0;
1768 
1769 	ndev->stats.multicast += emac_read(EMAC_RXMCASTFRAMES);
1770 	emac_write(EMAC_RXMCASTFRAMES, stats_clear_mask);
1771 
1772 	ndev->stats.collisions += (emac_read(EMAC_TXCOLLISION) +
1773 					   emac_read(EMAC_TXSINGLECOLL) +
1774 					   emac_read(EMAC_TXMULTICOLL));
1775 	emac_write(EMAC_TXCOLLISION, stats_clear_mask);
1776 	emac_write(EMAC_TXSINGLECOLL, stats_clear_mask);
1777 	emac_write(EMAC_TXMULTICOLL, stats_clear_mask);
1778 
1779 	ndev->stats.rx_length_errors += (emac_read(EMAC_RXOVERSIZED) +
1780 						emac_read(EMAC_RXJABBER) +
1781 						emac_read(EMAC_RXUNDERSIZED));
1782 	emac_write(EMAC_RXOVERSIZED, stats_clear_mask);
1783 	emac_write(EMAC_RXJABBER, stats_clear_mask);
1784 	emac_write(EMAC_RXUNDERSIZED, stats_clear_mask);
1785 
1786 	ndev->stats.rx_over_errors += (emac_read(EMAC_RXSOFOVERRUNS) +
1787 					       emac_read(EMAC_RXMOFOVERRUNS));
1788 	emac_write(EMAC_RXSOFOVERRUNS, stats_clear_mask);
1789 	emac_write(EMAC_RXMOFOVERRUNS, stats_clear_mask);
1790 
1791 	ndev->stats.rx_fifo_errors += emac_read(EMAC_RXDMAOVERRUNS);
1792 	emac_write(EMAC_RXDMAOVERRUNS, stats_clear_mask);
1793 
1794 	ndev->stats.tx_carrier_errors +=
1795 		emac_read(EMAC_TXCARRIERSENSE);
1796 	emac_write(EMAC_TXCARRIERSENSE, stats_clear_mask);
1797 
1798 	ndev->stats.tx_fifo_errors += emac_read(EMAC_TXUNDERRUN);
1799 	emac_write(EMAC_TXUNDERRUN, stats_clear_mask);
1800 
1801 	pm_runtime_put(&priv->pdev->dev);
1802 
1803 	return &ndev->stats;
1804 }
1805 
1806 static const struct net_device_ops emac_netdev_ops = {
1807 	.ndo_open		= emac_dev_open,
1808 	.ndo_stop		= emac_dev_stop,
1809 	.ndo_start_xmit		= emac_dev_xmit,
1810 	.ndo_set_rx_mode	= emac_dev_mcast_set,
1811 	.ndo_set_mac_address	= emac_dev_setmac_addr,
1812 	.ndo_do_ioctl		= emac_devioctl,
1813 	.ndo_tx_timeout		= emac_dev_tx_timeout,
1814 	.ndo_get_stats		= emac_dev_getnetstats,
1815 #ifdef CONFIG_NET_POLL_CONTROLLER
1816 	.ndo_poll_controller	= emac_poll_controller,
1817 #endif
1818 };
1819 
1820 static const struct of_device_id davinci_emac_of_match[];
1821 
1822 static struct emac_platform_data *
1823 davinci_emac_of_get_pdata(struct platform_device *pdev, struct emac_priv *priv)
1824 {
1825 	struct device_node *np;
1826 	const struct of_device_id *match;
1827 	const struct emac_platform_data *auxdata;
1828 	struct emac_platform_data *pdata = NULL;
1829 	const u8 *mac_addr;
1830 
1831 	if (!IS_ENABLED(CONFIG_OF) || !pdev->dev.of_node)
1832 		return dev_get_platdata(&pdev->dev);
1833 
1834 	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
1835 	if (!pdata)
1836 		return NULL;
1837 
1838 	np = pdev->dev.of_node;
1839 	pdata->version = EMAC_VERSION_2;
1840 
1841 	if (!is_valid_ether_addr(pdata->mac_addr)) {
1842 		mac_addr = of_get_mac_address(np);
1843 		if (mac_addr)
1844 			ether_addr_copy(pdata->mac_addr, mac_addr);
1845 	}
1846 
1847 	of_property_read_u32(np, "ti,davinci-ctrl-reg-offset",
1848 			     &pdata->ctrl_reg_offset);
1849 
1850 	of_property_read_u32(np, "ti,davinci-ctrl-mod-reg-offset",
1851 			     &pdata->ctrl_mod_reg_offset);
1852 
1853 	of_property_read_u32(np, "ti,davinci-ctrl-ram-offset",
1854 			     &pdata->ctrl_ram_offset);
1855 
1856 	of_property_read_u32(np, "ti,davinci-ctrl-ram-size",
1857 			     &pdata->ctrl_ram_size);
1858 
1859 	of_property_read_u8(np, "ti,davinci-rmii-en", &pdata->rmii_en);
1860 
1861 	pdata->no_bd_ram = of_property_read_bool(np, "ti,davinci-no-bd-ram");
1862 
1863 	priv->phy_node = of_parse_phandle(np, "phy-handle", 0);
1864 	if (!priv->phy_node) {
1865 		if (!of_phy_is_fixed_link(np))
1866 			pdata->phy_id = NULL;
1867 		else if (of_phy_register_fixed_link(np) >= 0)
1868 			priv->phy_node = of_node_get(np);
1869 	}
1870 
1871 	auxdata = pdev->dev.platform_data;
1872 	if (auxdata) {
1873 		pdata->interrupt_enable = auxdata->interrupt_enable;
1874 		pdata->interrupt_disable = auxdata->interrupt_disable;
1875 	}
1876 
1877 	match = of_match_device(davinci_emac_of_match, &pdev->dev);
1878 	if (match && match->data) {
1879 		auxdata = match->data;
1880 		pdata->version = auxdata->version;
1881 		pdata->hw_ram_addr = auxdata->hw_ram_addr;
1882 	}
1883 
1884 	return  pdata;
1885 }
1886 
1887 static int davinci_emac_try_get_mac(struct platform_device *pdev,
1888 				    int instance, u8 *mac_addr)
1889 {
1890 	if (!pdev->dev.of_node)
1891 		return -EINVAL;
1892 
1893 	return ti_cm_get_macid(&pdev->dev, instance, mac_addr);
1894 }
1895 
1896 /**
1897  * davinci_emac_probe - EMAC device probe
1898  * @pdev: The DaVinci EMAC device that we are removing
1899  *
1900  * Called when probing for emac devicesr. We get details of instances and
1901  * resource information from platform init and register a network device
1902  * and allocate resources necessary for driver to perform
1903  */
1904 static int davinci_emac_probe(struct platform_device *pdev)
1905 {
1906 	int rc = 0;
1907 	struct resource *res, *res_ctrl;
1908 	struct net_device *ndev;
1909 	struct emac_priv *priv;
1910 	unsigned long hw_ram_addr;
1911 	struct emac_platform_data *pdata;
1912 	struct cpdma_params dma_params;
1913 	struct clk *emac_clk;
1914 	unsigned long emac_bus_frequency;
1915 
1916 
1917 	/* obtain emac clock from kernel */
1918 	emac_clk = devm_clk_get(&pdev->dev, NULL);
1919 	if (IS_ERR(emac_clk)) {
1920 		dev_err(&pdev->dev, "failed to get EMAC clock\n");
1921 		return -EBUSY;
1922 	}
1923 	emac_bus_frequency = clk_get_rate(emac_clk);
1924 	devm_clk_put(&pdev->dev, emac_clk);
1925 
1926 	/* TODO: Probe PHY here if possible */
1927 
1928 	ndev = alloc_etherdev(sizeof(struct emac_priv));
1929 	if (!ndev)
1930 		return -ENOMEM;
1931 
1932 	platform_set_drvdata(pdev, ndev);
1933 	priv = netdev_priv(ndev);
1934 	priv->pdev = pdev;
1935 	priv->ndev = ndev;
1936 	priv->msg_enable = netif_msg_init(debug_level, DAVINCI_EMAC_DEBUG);
1937 
1938 	spin_lock_init(&priv->lock);
1939 
1940 	pdata = davinci_emac_of_get_pdata(pdev, priv);
1941 	if (!pdata) {
1942 		dev_err(&pdev->dev, "no platform data\n");
1943 		rc = -ENODEV;
1944 		goto no_pdata;
1945 	}
1946 
1947 	/* MAC addr and PHY mask , RMII enable info from platform_data */
1948 	memcpy(priv->mac_addr, pdata->mac_addr, ETH_ALEN);
1949 	priv->phy_id = pdata->phy_id;
1950 	priv->rmii_en = pdata->rmii_en;
1951 	priv->version = pdata->version;
1952 	priv->int_enable = pdata->interrupt_enable;
1953 	priv->int_disable = pdata->interrupt_disable;
1954 
1955 	priv->coal_intvl = 0;
1956 	priv->bus_freq_mhz = (u32)(emac_bus_frequency / 1000000);
1957 
1958 	/* Get EMAC platform data */
1959 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1960 	priv->emac_base_phys = res->start + pdata->ctrl_reg_offset;
1961 	priv->remap_addr = devm_ioremap_resource(&pdev->dev, res);
1962 	if (IS_ERR(priv->remap_addr)) {
1963 		rc = PTR_ERR(priv->remap_addr);
1964 		goto no_pdata;
1965 	}
1966 
1967 	res_ctrl = platform_get_resource(pdev, IORESOURCE_MEM, 1);
1968 	if (res_ctrl) {
1969 		priv->ctrl_base =
1970 			devm_ioremap_resource(&pdev->dev, res_ctrl);
1971 		if (IS_ERR(priv->ctrl_base)) {
1972 			rc = PTR_ERR(priv->ctrl_base);
1973 			goto no_pdata;
1974 		}
1975 	} else {
1976 		priv->ctrl_base = priv->remap_addr + pdata->ctrl_mod_reg_offset;
1977 	}
1978 
1979 	priv->emac_base = priv->remap_addr + pdata->ctrl_reg_offset;
1980 	ndev->base_addr = (unsigned long)priv->remap_addr;
1981 
1982 	hw_ram_addr = pdata->hw_ram_addr;
1983 	if (!hw_ram_addr)
1984 		hw_ram_addr = (u32 __force)res->start + pdata->ctrl_ram_offset;
1985 
1986 	memset(&dma_params, 0, sizeof(dma_params));
1987 	dma_params.dev			= &pdev->dev;
1988 	dma_params.dmaregs		= priv->emac_base;
1989 	dma_params.rxthresh		= priv->emac_base + 0x120;
1990 	dma_params.rxfree		= priv->emac_base + 0x140;
1991 	dma_params.txhdp		= priv->emac_base + 0x600;
1992 	dma_params.rxhdp		= priv->emac_base + 0x620;
1993 	dma_params.txcp			= priv->emac_base + 0x640;
1994 	dma_params.rxcp			= priv->emac_base + 0x660;
1995 	dma_params.num_chan		= EMAC_MAX_TXRX_CHANNELS;
1996 	dma_params.min_packet_size	= EMAC_DEF_MIN_ETHPKTSIZE;
1997 	dma_params.desc_hw_addr		= hw_ram_addr;
1998 	dma_params.desc_mem_size	= pdata->ctrl_ram_size;
1999 	dma_params.desc_align		= 16;
2000 
2001 	dma_params.desc_mem_phys = pdata->no_bd_ram ? 0 :
2002 			(u32 __force)res->start + pdata->ctrl_ram_offset;
2003 
2004 	priv->dma = cpdma_ctlr_create(&dma_params);
2005 	if (!priv->dma) {
2006 		dev_err(&pdev->dev, "error initializing DMA\n");
2007 		rc = -ENOMEM;
2008 		goto no_pdata;
2009 	}
2010 
2011 	priv->txchan = cpdma_chan_create(priv->dma, tx_chan_num(EMAC_DEF_TX_CH),
2012 				       emac_tx_handler);
2013 	priv->rxchan = cpdma_chan_create(priv->dma, rx_chan_num(EMAC_DEF_RX_CH),
2014 				       emac_rx_handler);
2015 	if (WARN_ON(!priv->txchan || !priv->rxchan)) {
2016 		rc = -ENOMEM;
2017 		goto no_cpdma_chan;
2018 	}
2019 
2020 	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
2021 	if (!res) {
2022 		dev_err(&pdev->dev, "error getting irq res\n");
2023 		rc = -ENOENT;
2024 		goto no_cpdma_chan;
2025 	}
2026 	ndev->irq = res->start;
2027 
2028 	rc = davinci_emac_try_get_mac(pdev, res_ctrl ? 0 : 1, priv->mac_addr);
2029 	if (!rc)
2030 		ether_addr_copy(ndev->dev_addr, priv->mac_addr);
2031 
2032 	if (!is_valid_ether_addr(priv->mac_addr)) {
2033 		/* Use random MAC if none passed */
2034 		eth_hw_addr_random(ndev);
2035 		memcpy(priv->mac_addr, ndev->dev_addr, ndev->addr_len);
2036 		dev_warn(&pdev->dev, "using random MAC addr: %pM\n",
2037 							priv->mac_addr);
2038 	}
2039 
2040 	ndev->netdev_ops = &emac_netdev_ops;
2041 	ndev->ethtool_ops = &ethtool_ops;
2042 	netif_napi_add(ndev, &priv->napi, emac_poll, EMAC_POLL_WEIGHT);
2043 
2044 	pm_runtime_enable(&pdev->dev);
2045 	rc = pm_runtime_get_sync(&pdev->dev);
2046 	if (rc < 0) {
2047 		pm_runtime_put_noidle(&pdev->dev);
2048 		dev_err(&pdev->dev, "%s: failed to get_sync(%d)\n",
2049 			__func__, rc);
2050 		goto no_cpdma_chan;
2051 	}
2052 
2053 	/* register the network device */
2054 	SET_NETDEV_DEV(ndev, &pdev->dev);
2055 	rc = register_netdev(ndev);
2056 	if (rc) {
2057 		dev_err(&pdev->dev, "error in register_netdev\n");
2058 		rc = -ENODEV;
2059 		pm_runtime_put(&pdev->dev);
2060 		goto no_cpdma_chan;
2061 	}
2062 
2063 
2064 	if (netif_msg_probe(priv)) {
2065 		dev_notice(&pdev->dev, "DaVinci EMAC Probe found device "
2066 			   "(regs: %p, irq: %d)\n",
2067 			   (void *)priv->emac_base_phys, ndev->irq);
2068 	}
2069 	pm_runtime_put(&pdev->dev);
2070 
2071 	return 0;
2072 
2073 no_cpdma_chan:
2074 	if (priv->txchan)
2075 		cpdma_chan_destroy(priv->txchan);
2076 	if (priv->rxchan)
2077 		cpdma_chan_destroy(priv->rxchan);
2078 	cpdma_ctlr_destroy(priv->dma);
2079 no_pdata:
2080 	free_netdev(ndev);
2081 	return rc;
2082 }
2083 
2084 /**
2085  * davinci_emac_remove - EMAC device remove
2086  * @pdev: The DaVinci EMAC device that we are removing
2087  *
2088  * Called when removing the device driver. We disable clock usage and release
2089  * the resources taken up by the driver and unregister network device
2090  */
2091 static int davinci_emac_remove(struct platform_device *pdev)
2092 {
2093 	struct net_device *ndev = platform_get_drvdata(pdev);
2094 	struct emac_priv *priv = netdev_priv(ndev);
2095 
2096 	dev_notice(&ndev->dev, "DaVinci EMAC: davinci_emac_remove()\n");
2097 
2098 	if (priv->txchan)
2099 		cpdma_chan_destroy(priv->txchan);
2100 	if (priv->rxchan)
2101 		cpdma_chan_destroy(priv->rxchan);
2102 	cpdma_ctlr_destroy(priv->dma);
2103 
2104 	unregister_netdev(ndev);
2105 	pm_runtime_disable(&pdev->dev);
2106 	free_netdev(ndev);
2107 
2108 	return 0;
2109 }
2110 
2111 static int davinci_emac_suspend(struct device *dev)
2112 {
2113 	struct platform_device *pdev = to_platform_device(dev);
2114 	struct net_device *ndev = platform_get_drvdata(pdev);
2115 
2116 	if (netif_running(ndev))
2117 		emac_dev_stop(ndev);
2118 
2119 	return 0;
2120 }
2121 
2122 static int davinci_emac_resume(struct device *dev)
2123 {
2124 	struct platform_device *pdev = to_platform_device(dev);
2125 	struct net_device *ndev = platform_get_drvdata(pdev);
2126 
2127 	if (netif_running(ndev))
2128 		emac_dev_open(ndev);
2129 
2130 	return 0;
2131 }
2132 
2133 static const struct dev_pm_ops davinci_emac_pm_ops = {
2134 	.suspend	= davinci_emac_suspend,
2135 	.resume		= davinci_emac_resume,
2136 };
2137 
2138 #if IS_ENABLED(CONFIG_OF)
2139 static const struct emac_platform_data am3517_emac_data = {
2140 	.version		= EMAC_VERSION_2,
2141 	.hw_ram_addr		= 0x01e20000,
2142 };
2143 
2144 static const struct emac_platform_data dm816_emac_data = {
2145 	.version		= EMAC_VERSION_2,
2146 };
2147 
2148 static const struct of_device_id davinci_emac_of_match[] = {
2149 	{.compatible = "ti,davinci-dm6467-emac", },
2150 	{.compatible = "ti,am3517-emac", .data = &am3517_emac_data, },
2151 	{.compatible = "ti,dm816-emac", .data = &dm816_emac_data, },
2152 	{},
2153 };
2154 MODULE_DEVICE_TABLE(of, davinci_emac_of_match);
2155 #endif
2156 
2157 /* davinci_emac_driver: EMAC platform driver structure */
2158 static struct platform_driver davinci_emac_driver = {
2159 	.driver = {
2160 		.name	 = "davinci_emac",
2161 		.pm	 = &davinci_emac_pm_ops,
2162 		.of_match_table = of_match_ptr(davinci_emac_of_match),
2163 	},
2164 	.probe = davinci_emac_probe,
2165 	.remove = davinci_emac_remove,
2166 };
2167 
2168 /**
2169  * davinci_emac_init - EMAC driver module init
2170  *
2171  * Called when initializing the driver. We register the driver with
2172  * the platform.
2173  */
2174 static int __init davinci_emac_init(void)
2175 {
2176 	return platform_driver_register(&davinci_emac_driver);
2177 }
2178 late_initcall(davinci_emac_init);
2179 
2180 /**
2181  * davinci_emac_exit - EMAC driver module exit
2182  *
2183  * Called when exiting the driver completely. We unregister the driver with
2184  * the platform and exit
2185  */
2186 static void __exit davinci_emac_exit(void)
2187 {
2188 	platform_driver_unregister(&davinci_emac_driver);
2189 }
2190 module_exit(davinci_emac_exit);
2191 
2192 MODULE_LICENSE("GPL");
2193 MODULE_AUTHOR("DaVinci EMAC Maintainer: Anant Gole <anantgole@ti.com>");
2194 MODULE_AUTHOR("DaVinci EMAC Maintainer: Chaithrika U S <chaithrika@ti.com>");
2195 MODULE_DESCRIPTION("DaVinci EMAC Ethernet driver");
2196