xref: /openbmc/linux/drivers/net/ethernet/ti/Kconfig (revision f7c35abe)
1#
2# TI device configuration
3#
4
5config NET_VENDOR_TI
6	bool "Texas Instruments (TI) devices"
7	default y
8	depends on PCI || EISA || AR7 || ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE
9	---help---
10	  If you have a network (Ethernet) card belonging to this class, say Y.
11
12	  Note that the answer to this question doesn't directly affect the
13	  kernel: saying N will just cause the configurator to skip all
14	  the questions about TI devices. If you say Y, you will be asked for
15	  your specific card in the following questions.
16
17if NET_VENDOR_TI
18
19config TI_DAVINCI_EMAC
20	tristate "TI DaVinci EMAC Support"
21	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
22	select TI_DAVINCI_MDIO
23	select TI_DAVINCI_CPDMA
24	select PHYLIB
25	---help---
26	  This driver supports TI's DaVinci Ethernet .
27
28	  To compile this driver as a module, choose M here: the module
29	  will be called davinci_emac_driver.  This is recommended.
30
31config TI_DAVINCI_MDIO
32	tristate "TI DaVinci MDIO Support"
33	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE
34	select PHYLIB
35	---help---
36	  This driver supports TI's DaVinci MDIO module.
37
38	  To compile this driver as a module, choose M here: the module
39	  will be called davinci_mdio.  This is recommended.
40
41config TI_DAVINCI_CPDMA
42	tristate "TI DaVinci CPDMA Support"
43	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS
44	---help---
45	  This driver supports TI's DaVinci CPDMA dma engine.
46
47	  To compile this driver as a module, choose M here: the module
48	  will be called davinci_cpdma.  This is recommended.
49
50config TI_CPSW_PHY_SEL
51	bool
52	---help---
53	  This driver supports configuring of the phy mode connected to
54	  the CPSW.
55
56config TI_CPSW_ALE
57	tristate "TI CPSW ALE Support"
58	---help---
59	  This driver supports TI's CPSW ALE module.
60
61config TI_CPSW
62	tristate "TI CPSW Switch Support"
63	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS
64	select TI_DAVINCI_CPDMA
65	select TI_DAVINCI_MDIO
66	select TI_CPSW_PHY_SEL
67	select TI_CPSW_ALE
68	select MFD_SYSCON
69	select REGMAP
70	---help---
71	  This driver supports TI's CPSW Ethernet Switch.
72
73	  To compile this driver as a module, choose M here: the module
74	  will be called cpsw.
75
76config TI_CPTS
77	bool "TI Common Platform Time Sync (CPTS) Support"
78	depends on TI_CPSW || TI_KEYSTONE_NETCP
79	depends on PTP_1588_CLOCK
80	---help---
81	  This driver supports the Common Platform Time Sync unit of
82	  the CPSW Ethernet Switch and Keystone 2 1g/10g Switch Subsystem.
83	  The unit can time stamp PTP UDP/IPv4 and Layer 2 packets, and the
84	  driver offers a PTP Hardware Clock.
85
86config TI_CPTS_MOD
87	tristate
88	depends on TI_CPTS
89	default y if TI_CPSW=y || TI_KEYSTONE_NETCP=y
90	default m
91
92config TI_KEYSTONE_NETCP
93	tristate "TI Keystone NETCP Core Support"
94	select TI_CPSW_ALE
95	select TI_DAVINCI_MDIO
96	depends on OF
97	depends on KEYSTONE_NAVIGATOR_DMA && KEYSTONE_NAVIGATOR_QMSS
98	---help---
99	  This driver supports TI's Keystone NETCP Core.
100
101	  To compile this driver as a module, choose M here: the module
102	  will be called keystone_netcp.
103
104config TI_KEYSTONE_NETCP_ETHSS
105	depends on TI_KEYSTONE_NETCP
106	tristate "TI Keystone NETCP Ethernet subsystem Support"
107	---help---
108
109	  To compile this driver as a module, choose M here: the module
110	  will be called keystone_netcp_ethss.
111
112config TLAN
113	tristate "TI ThunderLAN support"
114	depends on (PCI || EISA)
115	---help---
116	  If you have a PCI Ethernet network card based on the ThunderLAN chip
117	  which is supported by this driver, say Y here.
118
119	  Devices currently supported by this driver are Compaq Netelligent,
120	  Compaq NetFlex and Olicom cards.  Please read the file
121	  <file:Documentation/networking/tlan.txt> for more details.
122
123	  To compile this driver as a module, choose M here. The module
124	  will be called tlan.
125
126	  Please email feedback to <torben.mathiasen@compaq.com>.
127
128config CPMAC
129	tristate "TI AR7 CPMAC Ethernet support"
130	depends on AR7
131	select PHYLIB
132	---help---
133	  TI AR7 CPMAC Ethernet support
134
135endif # NET_VENDOR_TI
136