1# SPDX-License-Identifier: GPL-2.0-only 2# 3# TI device configuration 4# 5 6config NET_VENDOR_TI 7 bool "Texas Instruments (TI) devices" 8 default y 9 depends on PCI || EISA || AR7 || ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3 10 help 11 If you have a network (Ethernet) card belonging to this class, say Y. 12 13 Note that the answer to this question doesn't directly affect the 14 kernel: saying N will just cause the configurator to skip all 15 the questions about TI devices. If you say Y, you will be asked for 16 your specific card in the following questions. 17 18if NET_VENDOR_TI 19 20config TI_DAVINCI_EMAC 21 tristate "TI DaVinci EMAC Support" 22 depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 ) || COMPILE_TEST 23 select TI_DAVINCI_MDIO 24 select PHYLIB 25 select GENERIC_ALLOCATOR 26 help 27 This driver supports TI's DaVinci Ethernet . 28 29 To compile this driver as a module, choose M here: the module 30 will be called davinci_emac_driver. This is recommended. 31 32config TI_DAVINCI_MDIO 33 tristate "TI DaVinci MDIO Support" 34 depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST 35 select PHYLIB 36 select MDIO_BITBANG 37 help 38 This driver supports TI's DaVinci MDIO module. 39 40 To compile this driver as a module, choose M here: the module 41 will be called davinci_mdio. This is recommended. 42 43config TI_CPSW_PHY_SEL 44 bool "TI CPSW Phy mode Selection (DEPRECATED)" 45 default n 46 help 47 This driver supports configuring of the phy mode connected to 48 the CPSW. DEPRECATED: use PHY_TI_GMII_SEL. 49 50config TI_CPSW 51 tristate "TI CPSW Switch Support" 52 depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || COMPILE_TEST 53 depends on TI_CPTS || !TI_CPTS 54 select TI_DAVINCI_MDIO 55 select MFD_SYSCON 56 select PAGE_POOL 57 select REGMAP 58 imply PHY_TI_GMII_SEL 59 help 60 This driver supports TI's CPSW Ethernet Switch. 61 62 To compile this driver as a module, choose M here: the module 63 will be called cpsw. 64 65config TI_CPSW_SWITCHDEV 66 tristate "TI CPSW Switch Support with switchdev" 67 depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || COMPILE_TEST 68 depends on NET_SWITCHDEV 69 depends on TI_CPTS || !TI_CPTS 70 select PAGE_POOL 71 select TI_DAVINCI_MDIO 72 select MFD_SYSCON 73 select REGMAP 74 select NET_DEVLINK 75 imply PHY_TI_GMII_SEL 76 help 77 This driver supports TI's CPSW Ethernet Switch. 78 79 To compile this driver as a module, choose M here: the module 80 will be called cpsw_new. 81 82config TI_CPTS 83 tristate "TI Common Platform Time Sync (CPTS) Support" 84 depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || COMPILE_TEST 85 depends on COMMON_CLK 86 depends on PTP_1588_CLOCK 87 help 88 This driver supports the Common Platform Time Sync unit of 89 the CPSW Ethernet Switch and Keystone 2 1g/10g Switch Subsystem. 90 The unit can time stamp PTP UDP/IPv4 and Layer 2 packets, and the 91 driver offers a PTP Hardware Clock. 92 93config TI_K3_AM65_CPSW_NUSS 94 tristate "TI K3 AM654x/J721E CPSW Ethernet driver" 95 depends on ARCH_K3 && OF && TI_K3_UDMA_GLUE_LAYER 96 select NET_DEVLINK 97 select TI_DAVINCI_MDIO 98 select PHYLINK 99 imply PHY_TI_GMII_SEL 100 depends on TI_K3_AM65_CPTS || !TI_K3_AM65_CPTS 101 help 102 This driver supports TI K3 AM654/J721E CPSW2G Ethernet SubSystem. 103 The two-port Gigabit Ethernet MAC (MCU_CPSW0) subsystem provides 104 Ethernet packet communication for the device: One Ethernet port 105 (port 1) with selectable RGMII and RMII interfaces and an internal 106 Communications Port Programming Interface (CPPI) port (port 0). 107 108 To compile this driver as a module, choose M here: the module 109 will be called ti-am65-cpsw-nuss. 110 111config TI_K3_AM65_CPSW_SWITCHDEV 112 bool "TI K3 AM654x/J721E CPSW Switch mode support" 113 depends on TI_K3_AM65_CPSW_NUSS 114 depends on NET_SWITCHDEV 115 help 116 This enables switchdev support for TI K3 CPSWxG Ethernet 117 Switch. Enable this driver to support hardware switch support for AM65 118 CPSW NUSS driver. 119 120config TI_K3_AM65_CPTS 121 tristate "TI K3 AM65x CPTS" 122 depends on ARCH_K3 && OF 123 depends on PTP_1588_CLOCK 124 help 125 Say y here to support the TI K3 AM65x CPTS with 1588 features such as 126 PTP hardware clock for each CPTS device and network packets 127 timestamping where applicable. 128 Depending on integration CPTS blocks enable compliance with 129 the IEEE 1588-2008 standard for a precision clock synchronization 130 protocol, Ethernet Enhanced Scheduled Traffic Operations (CPTS_ESTFn) 131 and PCIe Subsystem Precision Time Measurement (PTM). 132 133config TI_AM65_CPSW_TAS 134 bool "Enable TAS offload in AM65 CPSW" 135 depends on TI_K3_AM65_CPSW_NUSS && NET_SCH_TAPRIO && TI_K3_AM65_CPTS 136 help 137 Say y here to support Time Aware Shaper(TAS) offload in AM65 CPSW. 138 AM65 CPSW hardware supports Enhanced Scheduled Traffic (EST) 139 defined in IEEE 802.1Q 2018. The EST scheduler runs on CPTS and the 140 TAS/EST schedule is updated in the Fetch RAM memory of the CPSW. 141 142config TI_KEYSTONE_NETCP 143 tristate "TI Keystone NETCP Core Support" 144 select TI_DAVINCI_MDIO 145 depends on OF 146 depends on KEYSTONE_NAVIGATOR_DMA && KEYSTONE_NAVIGATOR_QMSS 147 depends on TI_CPTS || !TI_CPTS 148 help 149 This driver supports TI's Keystone NETCP Core. 150 151 To compile this driver as a module, choose M here: the module 152 will be called keystone_netcp. 153 154config TI_KEYSTONE_NETCP_ETHSS 155 depends on TI_KEYSTONE_NETCP 156 tristate "TI Keystone NETCP Ethernet subsystem Support" 157 help 158 159 To compile this driver as a module, choose M here: the module 160 will be called keystone_netcp_ethss. 161 162config TLAN 163 tristate "TI ThunderLAN support" 164 depends on (PCI || EISA) 165 help 166 If you have a PCI Ethernet network card based on the ThunderLAN chip 167 which is supported by this driver, say Y here. 168 169 Devices currently supported by this driver are Compaq Netelligent, 170 Compaq NetFlex and Olicom cards. Please read the file 171 <file:Documentation/networking/device_drivers/ethernet/ti/tlan.rst> 172 for more details. 173 174 To compile this driver as a module, choose M here. The module 175 will be called tlan. 176 177 Please email feedback to <torben.mathiasen@compaq.com>. 178 179config CPMAC 180 tristate "TI AR7 CPMAC Ethernet support" 181 depends on AR7 182 select PHYLIB 183 help 184 TI AR7 CPMAC Ethernet support 185 186config TI_ICSSG_PRUETH 187 tristate "TI Gigabit PRU Ethernet driver" 188 select PHYLIB 189 select TI_ICSS_IEP 190 depends on PRU_REMOTEPROC 191 depends on ARCH_K3 && OF && TI_K3_UDMA_GLUE_LAYER 192 help 193 Support dual Gigabit Ethernet ports over the ICSSG PRU Subsystem. 194 This subsystem is available starting with the AM65 platform. 195 196 This driver requires firmware binaries which will run on the PRUs 197 to support the Ethernet operation. Currently, it supports Ethernet 198 with 1G and 100M link speed. 199 200config TI_ICSS_IEP 201 tristate "TI PRU ICSS IEP driver" 202 depends on TI_PRUSS 203 default TI_PRUSS 204 help 205 This driver enables support for the PRU-ICSS Industrial Ethernet 206 Peripheral within a PRU-ICSS subsystem present on various TI SoCs. 207 208 To compile this driver as a module, choose M here. The module 209 will be called icss_iep. 210 211endif # NET_VENDOR_TI 212