1# SPDX-License-Identifier: GPL-2.0-only 2# 3# TI device configuration 4# 5 6config NET_VENDOR_TI 7 bool "Texas Instruments (TI) devices" 8 default y 9 depends on PCI || EISA || AR7 || ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3 10 help 11 If you have a network (Ethernet) card belonging to this class, say Y. 12 13 Note that the answer to this question doesn't directly affect the 14 kernel: saying N will just cause the configurator to skip all 15 the questions about TI devices. If you say Y, you will be asked for 16 your specific card in the following questions. 17 18if NET_VENDOR_TI 19 20config TI_DAVINCI_EMAC 21 tristate "TI DaVinci EMAC Support" 22 depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 ) || COMPILE_TEST 23 select TI_DAVINCI_MDIO 24 select PHYLIB 25 select GENERIC_ALLOCATOR 26 help 27 This driver supports TI's DaVinci Ethernet . 28 29 To compile this driver as a module, choose M here: the module 30 will be called davinci_emac_driver. This is recommended. 31 32config TI_DAVINCI_MDIO 33 tristate "TI DaVinci MDIO Support" 34 depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST 35 select PHYLIB 36 help 37 This driver supports TI's DaVinci MDIO module. 38 39 To compile this driver as a module, choose M here: the module 40 will be called davinci_mdio. This is recommended. 41 42config TI_CPSW_PHY_SEL 43 bool "TI CPSW Phy mode Selection (DEPRECATED)" 44 default n 45 help 46 This driver supports configuring of the phy mode connected to 47 the CPSW. DEPRECATED: use PHY_TI_GMII_SEL. 48 49config TI_CPSW 50 tristate "TI CPSW Switch Support" 51 depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || COMPILE_TEST 52 depends on TI_CPTS || !TI_CPTS 53 select TI_DAVINCI_MDIO 54 select MFD_SYSCON 55 select PAGE_POOL 56 select REGMAP 57 imply PHY_TI_GMII_SEL 58 help 59 This driver supports TI's CPSW Ethernet Switch. 60 61 To compile this driver as a module, choose M here: the module 62 will be called cpsw. 63 64config TI_CPSW_SWITCHDEV 65 tristate "TI CPSW Switch Support with switchdev" 66 depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || COMPILE_TEST 67 depends on NET_SWITCHDEV 68 depends on TI_CPTS || !TI_CPTS 69 select PAGE_POOL 70 select TI_DAVINCI_MDIO 71 select MFD_SYSCON 72 select REGMAP 73 select NET_DEVLINK 74 imply PHY_TI_GMII_SEL 75 help 76 This driver supports TI's CPSW Ethernet Switch. 77 78 To compile this driver as a module, choose M here: the module 79 will be called cpsw_new. 80 81config TI_CPTS 82 tristate "TI Common Platform Time Sync (CPTS) Support" 83 depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || COMPILE_TEST 84 depends on COMMON_CLK 85 depends on PTP_1588_CLOCK 86 help 87 This driver supports the Common Platform Time Sync unit of 88 the CPSW Ethernet Switch and Keystone 2 1g/10g Switch Subsystem. 89 The unit can time stamp PTP UDP/IPv4 and Layer 2 packets, and the 90 driver offers a PTP Hardware Clock. 91 92config TI_K3_AM65_CPSW_NUSS 93 tristate "TI K3 AM654x/J721E CPSW Ethernet driver" 94 depends on ARCH_K3 && OF && TI_K3_UDMA_GLUE_LAYER 95 select NET_DEVLINK 96 select TI_DAVINCI_MDIO 97 select PHYLINK 98 imply PHY_TI_GMII_SEL 99 depends on TI_K3_AM65_CPTS || !TI_K3_AM65_CPTS 100 help 101 This driver supports TI K3 AM654/J721E CPSW2G Ethernet SubSystem. 102 The two-port Gigabit Ethernet MAC (MCU_CPSW0) subsystem provides 103 Ethernet packet communication for the device: One Ethernet port 104 (port 1) with selectable RGMII and RMII interfaces and an internal 105 Communications Port Programming Interface (CPPI) port (port 0). 106 107 To compile this driver as a module, choose M here: the module 108 will be called ti-am65-cpsw-nuss. 109 110config TI_K3_AM65_CPSW_SWITCHDEV 111 bool "TI K3 AM654x/J721E CPSW Switch mode support" 112 depends on TI_K3_AM65_CPSW_NUSS 113 depends on NET_SWITCHDEV 114 help 115 This enables switchdev support for TI K3 CPSWxG Ethernet 116 Switch. Enable this driver to support hardware switch support for AM65 117 CPSW NUSS driver. 118 119config TI_K3_AM65_CPTS 120 tristate "TI K3 AM65x CPTS" 121 depends on ARCH_K3 && OF 122 depends on PTP_1588_CLOCK 123 help 124 Say y here to support the TI K3 AM65x CPTS with 1588 features such as 125 PTP hardware clock for each CPTS device and network packets 126 timestamping where applicable. 127 Depending on integration CPTS blocks enable compliance with 128 the IEEE 1588-2008 standard for a precision clock synchronization 129 protocol, Ethernet Enhanced Scheduled Traffic Operations (CPTS_ESTFn) 130 and PCIe Subsystem Precision Time Measurement (PTM). 131 132config TI_AM65_CPSW_TAS 133 bool "Enable TAS offload in AM65 CPSW" 134 depends on TI_K3_AM65_CPSW_NUSS && NET_SCH_TAPRIO && TI_K3_AM65_CPTS 135 help 136 Say y here to support Time Aware Shaper(TAS) offload in AM65 CPSW. 137 AM65 CPSW hardware supports Enhanced Scheduled Traffic (EST) 138 defined in IEEE 802.1Q 2018. The EST scheduler runs on CPTS and the 139 TAS/EST schedule is updated in the Fetch RAM memory of the CPSW. 140 141config TI_KEYSTONE_NETCP 142 tristate "TI Keystone NETCP Core Support" 143 select TI_DAVINCI_MDIO 144 depends on OF 145 depends on KEYSTONE_NAVIGATOR_DMA && KEYSTONE_NAVIGATOR_QMSS 146 depends on TI_CPTS || !TI_CPTS 147 help 148 This driver supports TI's Keystone NETCP Core. 149 150 To compile this driver as a module, choose M here: the module 151 will be called keystone_netcp. 152 153config TI_KEYSTONE_NETCP_ETHSS 154 depends on TI_KEYSTONE_NETCP 155 tristate "TI Keystone NETCP Ethernet subsystem Support" 156 help 157 158 To compile this driver as a module, choose M here: the module 159 will be called keystone_netcp_ethss. 160 161config TLAN 162 tristate "TI ThunderLAN support" 163 depends on (PCI || EISA) 164 help 165 If you have a PCI Ethernet network card based on the ThunderLAN chip 166 which is supported by this driver, say Y here. 167 168 Devices currently supported by this driver are Compaq Netelligent, 169 Compaq NetFlex and Olicom cards. Please read the file 170 <file:Documentation/networking/device_drivers/ethernet/ti/tlan.rst> 171 for more details. 172 173 To compile this driver as a module, choose M here. The module 174 will be called tlan. 175 176 Please email feedback to <torben.mathiasen@compaq.com>. 177 178config CPMAC 179 tristate "TI AR7 CPMAC Ethernet support" 180 depends on AR7 181 select PHYLIB 182 help 183 TI AR7 CPMAC Ethernet support 184 185endif # NET_VENDOR_TI 186