1# SPDX-License-Identifier: GPL-2.0-only 2# 3# TI device configuration 4# 5 6config NET_VENDOR_TI 7 bool "Texas Instruments (TI) devices" 8 default y 9 depends on PCI || EISA || AR7 || ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3 10 help 11 If you have a network (Ethernet) card belonging to this class, say Y. 12 13 Note that the answer to this question doesn't directly affect the 14 kernel: saying N will just cause the configurator to skip all 15 the questions about TI devices. If you say Y, you will be asked for 16 your specific card in the following questions. 17 18if NET_VENDOR_TI 19 20config TI_DAVINCI_EMAC 21 tristate "TI DaVinci EMAC Support" 22 depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 ) || COMPILE_TEST 23 select TI_DAVINCI_MDIO 24 select PHYLIB 25 select GENERIC_ALLOCATOR 26 help 27 This driver supports TI's DaVinci Ethernet . 28 29 To compile this driver as a module, choose M here: the module 30 will be called davinci_emac_driver. This is recommended. 31 32config TI_DAVINCI_MDIO 33 tristate "TI DaVinci MDIO Support" 34 depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST 35 select PHYLIB 36 help 37 This driver supports TI's DaVinci MDIO module. 38 39 To compile this driver as a module, choose M here: the module 40 will be called davinci_mdio. This is recommended. 41 42config TI_CPSW_PHY_SEL 43 bool "TI CPSW Phy mode Selection (DEPRECATED)" 44 default n 45 help 46 This driver supports configuring of the phy mode connected to 47 the CPSW. DEPRECATED: use PHY_TI_GMII_SEL. 48 49config TI_CPSW 50 tristate "TI CPSW Switch Support" 51 depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || COMPILE_TEST 52 depends on TI_CPTS || !TI_CPTS 53 select TI_DAVINCI_MDIO 54 select MFD_SYSCON 55 select PAGE_POOL 56 select REGMAP 57 imply PHY_TI_GMII_SEL 58 help 59 This driver supports TI's CPSW Ethernet Switch. 60 61 To compile this driver as a module, choose M here: the module 62 will be called cpsw. 63 64config TI_CPSW_SWITCHDEV 65 tristate "TI CPSW Switch Support with switchdev" 66 depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || COMPILE_TEST 67 depends on NET_SWITCHDEV 68 depends on TI_CPTS || !TI_CPTS 69 select PAGE_POOL 70 select TI_DAVINCI_MDIO 71 select MFD_SYSCON 72 select REGMAP 73 select NET_DEVLINK 74 imply PHY_TI_GMII_SEL 75 help 76 This driver supports TI's CPSW Ethernet Switch. 77 78 To compile this driver as a module, choose M here: the module 79 will be called cpsw_new. 80 81config TI_CPTS 82 tristate "TI Common Platform Time Sync (CPTS) Support" 83 depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || COMPILE_TEST 84 depends on COMMON_CLK 85 depends on PTP_1588_CLOCK 86 help 87 This driver supports the Common Platform Time Sync unit of 88 the CPSW Ethernet Switch and Keystone 2 1g/10g Switch Subsystem. 89 The unit can time stamp PTP UDP/IPv4 and Layer 2 packets, and the 90 driver offers a PTP Hardware Clock. 91 92config TI_K3_AM65_CPSW_NUSS 93 tristate "TI K3 AM654x/J721E CPSW Ethernet driver" 94 depends on ARCH_K3 && OF && TI_K3_UDMA_GLUE_LAYER 95 select TI_DAVINCI_MDIO 96 imply PHY_TI_GMII_SEL 97 depends on TI_K3_AM65_CPTS || !TI_K3_AM65_CPTS 98 help 99 This driver supports TI K3 AM654/J721E CPSW2G Ethernet SubSystem. 100 The two-port Gigabit Ethernet MAC (MCU_CPSW0) subsystem provides 101 Ethernet packet communication for the device: One Ethernet port 102 (port 1) with selectable RGMII and RMII interfaces and an internal 103 Communications Port Programming Interface (CPPI) port (port 0). 104 105 To compile this driver as a module, choose M here: the module 106 will be called ti-am65-cpsw-nuss. 107 108config TI_K3_AM65_CPTS 109 tristate "TI K3 AM65x CPTS" 110 depends on ARCH_K3 && OF 111 depends on PTP_1588_CLOCK 112 help 113 Say y here to support the TI K3 AM65x CPTS with 1588 features such as 114 PTP hardware clock for each CPTS device and network packets 115 timestamping where applicable. 116 Depending on integration CPTS blocks enable compliance with 117 the IEEE 1588-2008 standard for a precision clock synchronization 118 protocol, Ethernet Enhanced Scheduled Traffic Operations (CPTS_ESTFn) 119 and PCIe Subsystem Precision Time Measurement (PTM). 120 121config TI_AM65_CPSW_TAS 122 bool "Enable TAS offload in AM65 CPSW" 123 depends on TI_K3_AM65_CPSW_NUSS && NET_SCH_TAPRIO && TI_K3_AM65_CPTS 124 help 125 Say y here to support Time Aware Shaper(TAS) offload in AM65 CPSW. 126 AM65 CPSW hardware supports Enhanced Scheduled Traffic (EST) 127 defined in IEEE 802.1Q 2018. The EST scheduler runs on CPTS and the 128 TAS/EST schedule is updated in the Fetch RAM memory of the CPSW. 129 130config TI_KEYSTONE_NETCP 131 tristate "TI Keystone NETCP Core Support" 132 select TI_DAVINCI_MDIO 133 depends on OF 134 depends on KEYSTONE_NAVIGATOR_DMA && KEYSTONE_NAVIGATOR_QMSS 135 depends on TI_CPTS || !TI_CPTS 136 help 137 This driver supports TI's Keystone NETCP Core. 138 139 To compile this driver as a module, choose M here: the module 140 will be called keystone_netcp. 141 142config TI_KEYSTONE_NETCP_ETHSS 143 depends on TI_KEYSTONE_NETCP 144 tristate "TI Keystone NETCP Ethernet subsystem Support" 145 help 146 147 To compile this driver as a module, choose M here: the module 148 will be called keystone_netcp_ethss. 149 150config TLAN 151 tristate "TI ThunderLAN support" 152 depends on (PCI || EISA) 153 help 154 If you have a PCI Ethernet network card based on the ThunderLAN chip 155 which is supported by this driver, say Y here. 156 157 Devices currently supported by this driver are Compaq Netelligent, 158 Compaq NetFlex and Olicom cards. Please read the file 159 <file:Documentation/networking/device_drivers/ti/tlan.rst> 160 for more details. 161 162 To compile this driver as a module, choose M here. The module 163 will be called tlan. 164 165 Please email feedback to <torben.mathiasen@compaq.com>. 166 167config CPMAC 168 tristate "TI AR7 CPMAC Ethernet support" 169 depends on AR7 170 select PHYLIB 171 help 172 TI AR7 CPMAC Ethernet support 173 174endif # NET_VENDOR_TI 175