1# SPDX-License-Identifier: GPL-2.0-only 2# 3# TI device configuration 4# 5 6config NET_VENDOR_TI 7 bool "Texas Instruments (TI) devices" 8 default y 9 depends on PCI || EISA || AR7 || ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3 10 help 11 If you have a network (Ethernet) card belonging to this class, say Y. 12 13 Note that the answer to this question doesn't directly affect the 14 kernel: saying N will just cause the configurator to skip all 15 the questions about TI devices. If you say Y, you will be asked for 16 your specific card in the following questions. 17 18if NET_VENDOR_TI 19 20config TI_DAVINCI_EMAC 21 tristate "TI DaVinci EMAC Support" 22 depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 ) || COMPILE_TEST 23 select TI_DAVINCI_MDIO 24 select PHYLIB 25 select GENERIC_ALLOCATOR 26 help 27 This driver supports TI's DaVinci Ethernet . 28 29 To compile this driver as a module, choose M here: the module 30 will be called davinci_emac_driver. This is recommended. 31 32config TI_DAVINCI_MDIO 33 tristate "TI DaVinci MDIO Support" 34 depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST 35 select PHYLIB 36 help 37 This driver supports TI's DaVinci MDIO module. 38 39 To compile this driver as a module, choose M here: the module 40 will be called davinci_mdio. This is recommended. 41 42config TI_CPSW_PHY_SEL 43 bool "TI CPSW Phy mode Selection (DEPRECATED)" 44 default n 45 help 46 This driver supports configuring of the phy mode connected to 47 the CPSW. DEPRECATED: use PHY_TI_GMII_SEL. 48 49config TI_CPSW 50 tristate "TI CPSW Switch Support" 51 depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || COMPILE_TEST 52 depends on TI_CPTS || !TI_CPTS 53 select TI_DAVINCI_MDIO 54 select MFD_SYSCON 55 select PAGE_POOL 56 select REGMAP 57 imply PHY_TI_GMII_SEL 58 help 59 This driver supports TI's CPSW Ethernet Switch. 60 61 To compile this driver as a module, choose M here: the module 62 will be called cpsw. 63 64config TI_CPSW_SWITCHDEV 65 tristate "TI CPSW Switch Support with switchdev" 66 depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || COMPILE_TEST 67 depends on NET_SWITCHDEV 68 depends on TI_CPTS || !TI_CPTS 69 select PAGE_POOL 70 select TI_DAVINCI_MDIO 71 select MFD_SYSCON 72 select REGMAP 73 select NET_DEVLINK 74 imply PHY_TI_GMII_SEL 75 help 76 This driver supports TI's CPSW Ethernet Switch. 77 78 To compile this driver as a module, choose M here: the module 79 will be called cpsw_new. 80 81config TI_CPTS 82 tristate "TI Common Platform Time Sync (CPTS) Support" 83 depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || COMPILE_TEST 84 depends on COMMON_CLK 85 depends on PTP_1588_CLOCK 86 help 87 This driver supports the Common Platform Time Sync unit of 88 the CPSW Ethernet Switch and Keystone 2 1g/10g Switch Subsystem. 89 The unit can time stamp PTP UDP/IPv4 and Layer 2 packets, and the 90 driver offers a PTP Hardware Clock. 91 92config TI_K3_AM65_CPSW_NUSS 93 tristate "TI K3 AM654x/J721E CPSW Ethernet driver" 94 depends on ARCH_K3 && OF && TI_K3_UDMA_GLUE_LAYER 95 select NET_DEVLINK 96 select TI_DAVINCI_MDIO 97 imply PHY_TI_GMII_SEL 98 depends on TI_K3_AM65_CPTS || !TI_K3_AM65_CPTS 99 help 100 This driver supports TI K3 AM654/J721E CPSW2G Ethernet SubSystem. 101 The two-port Gigabit Ethernet MAC (MCU_CPSW0) subsystem provides 102 Ethernet packet communication for the device: One Ethernet port 103 (port 1) with selectable RGMII and RMII interfaces and an internal 104 Communications Port Programming Interface (CPPI) port (port 0). 105 106 To compile this driver as a module, choose M here: the module 107 will be called ti-am65-cpsw-nuss. 108 109config TI_K3_AM65_CPSW_SWITCHDEV 110 bool "TI K3 AM654x/J721E CPSW Switch mode support" 111 depends on TI_K3_AM65_CPSW_NUSS 112 depends on NET_SWITCHDEV 113 help 114 This enables switchdev support for TI K3 CPSWxG Ethernet 115 Switch. Enable this driver to support hardware switch support for AM65 116 CPSW NUSS driver. 117 118config TI_K3_AM65_CPTS 119 tristate "TI K3 AM65x CPTS" 120 depends on ARCH_K3 && OF 121 depends on PTP_1588_CLOCK 122 help 123 Say y here to support the TI K3 AM65x CPTS with 1588 features such as 124 PTP hardware clock for each CPTS device and network packets 125 timestamping where applicable. 126 Depending on integration CPTS blocks enable compliance with 127 the IEEE 1588-2008 standard for a precision clock synchronization 128 protocol, Ethernet Enhanced Scheduled Traffic Operations (CPTS_ESTFn) 129 and PCIe Subsystem Precision Time Measurement (PTM). 130 131config TI_AM65_CPSW_TAS 132 bool "Enable TAS offload in AM65 CPSW" 133 depends on TI_K3_AM65_CPSW_NUSS && NET_SCH_TAPRIO && TI_K3_AM65_CPTS 134 help 135 Say y here to support Time Aware Shaper(TAS) offload in AM65 CPSW. 136 AM65 CPSW hardware supports Enhanced Scheduled Traffic (EST) 137 defined in IEEE 802.1Q 2018. The EST scheduler runs on CPTS and the 138 TAS/EST schedule is updated in the Fetch RAM memory of the CPSW. 139 140config TI_KEYSTONE_NETCP 141 tristate "TI Keystone NETCP Core Support" 142 select TI_DAVINCI_MDIO 143 depends on OF 144 depends on KEYSTONE_NAVIGATOR_DMA && KEYSTONE_NAVIGATOR_QMSS 145 depends on TI_CPTS || !TI_CPTS 146 help 147 This driver supports TI's Keystone NETCP Core. 148 149 To compile this driver as a module, choose M here: the module 150 will be called keystone_netcp. 151 152config TI_KEYSTONE_NETCP_ETHSS 153 depends on TI_KEYSTONE_NETCP 154 tristate "TI Keystone NETCP Ethernet subsystem Support" 155 help 156 157 To compile this driver as a module, choose M here: the module 158 will be called keystone_netcp_ethss. 159 160config TLAN 161 tristate "TI ThunderLAN support" 162 depends on (PCI || EISA) 163 help 164 If you have a PCI Ethernet network card based on the ThunderLAN chip 165 which is supported by this driver, say Y here. 166 167 Devices currently supported by this driver are Compaq Netelligent, 168 Compaq NetFlex and Olicom cards. Please read the file 169 <file:Documentation/networking/device_drivers/ethernet/ti/tlan.rst> 170 for more details. 171 172 To compile this driver as a module, choose M here. The module 173 will be called tlan. 174 175 Please email feedback to <torben.mathiasen@compaq.com>. 176 177config CPMAC 178 tristate "TI AR7 CPMAC Ethernet support" 179 depends on AR7 180 select PHYLIB 181 help 182 TI AR7 CPMAC Ethernet support 183 184endif # NET_VENDOR_TI 185