1 // SPDX-License-Identifier: GPL-2.0-only 2 /******************************************************************************* 3 This contains the functions to handle the platform driver. 4 5 Copyright (C) 2007-2011 STMicroelectronics Ltd 6 7 8 Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> 9 *******************************************************************************/ 10 11 #include <linux/device.h> 12 #include <linux/platform_device.h> 13 #include <linux/pm_runtime.h> 14 #include <linux/module.h> 15 #include <linux/io.h> 16 #include <linux/of.h> 17 #include <linux/of_net.h> 18 #include <linux/of_mdio.h> 19 20 #include "stmmac.h" 21 #include "stmmac_platform.h" 22 23 #ifdef CONFIG_OF 24 25 /** 26 * dwmac1000_validate_mcast_bins - validates the number of Multicast filter bins 27 * @dev: struct device of the platform device 28 * @mcast_bins: Multicast filtering bins 29 * Description: 30 * this function validates the number of Multicast filtering bins specified 31 * by the configuration through the device tree. The Synopsys GMAC supports 32 * 64 bins, 128 bins, or 256 bins. "bins" refer to the division of CRC 33 * number space. 64 bins correspond to 6 bits of the CRC, 128 corresponds 34 * to 7 bits, and 256 refers to 8 bits of the CRC. Any other setting is 35 * invalid and will cause the filtering algorithm to use Multicast 36 * promiscuous mode. 37 */ 38 static int dwmac1000_validate_mcast_bins(struct device *dev, int mcast_bins) 39 { 40 int x = mcast_bins; 41 42 switch (x) { 43 case HASH_TABLE_SIZE: 44 case 128: 45 case 256: 46 break; 47 default: 48 x = 0; 49 dev_info(dev, "Hash table entries set to unexpected value %d\n", 50 mcast_bins); 51 break; 52 } 53 return x; 54 } 55 56 /** 57 * dwmac1000_validate_ucast_entries - validate the Unicast address entries 58 * @dev: struct device of the platform device 59 * @ucast_entries: number of Unicast address entries 60 * Description: 61 * This function validates the number of Unicast address entries supported 62 * by a particular Synopsys 10/100/1000 controller. The Synopsys controller 63 * supports 1..32, 64, or 128 Unicast filter entries for it's Unicast filter 64 * logic. This function validates a valid, supported configuration is 65 * selected, and defaults to 1 Unicast address if an unsupported 66 * configuration is selected. 67 */ 68 static int dwmac1000_validate_ucast_entries(struct device *dev, 69 int ucast_entries) 70 { 71 int x = ucast_entries; 72 73 switch (x) { 74 case 1 ... 32: 75 case 64: 76 case 128: 77 break; 78 default: 79 x = 1; 80 dev_info(dev, "Unicast table entries set to unexpected value %d\n", 81 ucast_entries); 82 break; 83 } 84 return x; 85 } 86 87 /** 88 * stmmac_axi_setup - parse DT parameters for programming the AXI register 89 * @pdev: platform device 90 * Description: 91 * if required, from device-tree the AXI internal register can be tuned 92 * by using platform parameters. 93 */ 94 static struct stmmac_axi *stmmac_axi_setup(struct platform_device *pdev) 95 { 96 struct device_node *np; 97 struct stmmac_axi *axi; 98 99 np = of_parse_phandle(pdev->dev.of_node, "snps,axi-config", 0); 100 if (!np) 101 return NULL; 102 103 axi = devm_kzalloc(&pdev->dev, sizeof(*axi), GFP_KERNEL); 104 if (!axi) { 105 of_node_put(np); 106 return ERR_PTR(-ENOMEM); 107 } 108 109 axi->axi_lpi_en = of_property_read_bool(np, "snps,lpi_en"); 110 axi->axi_xit_frm = of_property_read_bool(np, "snps,xit_frm"); 111 axi->axi_kbbe = of_property_read_bool(np, "snps,kbbe"); 112 axi->axi_fb = of_property_read_bool(np, "snps,fb"); 113 axi->axi_mb = of_property_read_bool(np, "snps,mb"); 114 axi->axi_rb = of_property_read_bool(np, "snps,rb"); 115 116 if (of_property_read_u32(np, "snps,wr_osr_lmt", &axi->axi_wr_osr_lmt)) 117 axi->axi_wr_osr_lmt = 1; 118 if (of_property_read_u32(np, "snps,rd_osr_lmt", &axi->axi_rd_osr_lmt)) 119 axi->axi_rd_osr_lmt = 1; 120 of_property_read_u32_array(np, "snps,blen", axi->axi_blen, AXI_BLEN); 121 of_node_put(np); 122 123 return axi; 124 } 125 126 /** 127 * stmmac_mtl_setup - parse DT parameters for multiple queues configuration 128 * @pdev: platform device 129 * @plat: enet data 130 */ 131 static int stmmac_mtl_setup(struct platform_device *pdev, 132 struct plat_stmmacenet_data *plat) 133 { 134 struct device_node *q_node; 135 struct device_node *rx_node; 136 struct device_node *tx_node; 137 u8 queue = 0; 138 int ret = 0; 139 140 /* For backwards-compatibility with device trees that don't have any 141 * snps,mtl-rx-config or snps,mtl-tx-config properties, we fall back 142 * to one RX and TX queues each. 143 */ 144 plat->rx_queues_to_use = 1; 145 plat->tx_queues_to_use = 1; 146 147 /* First Queue must always be in DCB mode. As MTL_QUEUE_DCB = 1 we need 148 * to always set this, otherwise Queue will be classified as AVB 149 * (because MTL_QUEUE_AVB = 0). 150 */ 151 plat->rx_queues_cfg[0].mode_to_use = MTL_QUEUE_DCB; 152 plat->tx_queues_cfg[0].mode_to_use = MTL_QUEUE_DCB; 153 154 rx_node = of_parse_phandle(pdev->dev.of_node, "snps,mtl-rx-config", 0); 155 if (!rx_node) 156 return ret; 157 158 tx_node = of_parse_phandle(pdev->dev.of_node, "snps,mtl-tx-config", 0); 159 if (!tx_node) { 160 of_node_put(rx_node); 161 return ret; 162 } 163 164 /* Processing RX queues common config */ 165 if (of_property_read_u32(rx_node, "snps,rx-queues-to-use", 166 &plat->rx_queues_to_use)) 167 plat->rx_queues_to_use = 1; 168 169 if (of_property_read_bool(rx_node, "snps,rx-sched-sp")) 170 plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP; 171 else if (of_property_read_bool(rx_node, "snps,rx-sched-wsp")) 172 plat->rx_sched_algorithm = MTL_RX_ALGORITHM_WSP; 173 else 174 plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP; 175 176 /* Processing individual RX queue config */ 177 for_each_child_of_node(rx_node, q_node) { 178 if (queue >= plat->rx_queues_to_use) 179 break; 180 181 if (of_property_read_bool(q_node, "snps,dcb-algorithm")) 182 plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB; 183 else if (of_property_read_bool(q_node, "snps,avb-algorithm")) 184 plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_AVB; 185 else 186 plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB; 187 188 if (of_property_read_u32(q_node, "snps,map-to-dma-channel", 189 &plat->rx_queues_cfg[queue].chan)) 190 plat->rx_queues_cfg[queue].chan = queue; 191 /* TODO: Dynamic mapping to be included in the future */ 192 193 if (of_property_read_u32(q_node, "snps,priority", 194 &plat->rx_queues_cfg[queue].prio)) { 195 plat->rx_queues_cfg[queue].prio = 0; 196 plat->rx_queues_cfg[queue].use_prio = false; 197 } else { 198 plat->rx_queues_cfg[queue].use_prio = true; 199 } 200 201 /* RX queue specific packet type routing */ 202 if (of_property_read_bool(q_node, "snps,route-avcp")) 203 plat->rx_queues_cfg[queue].pkt_route = PACKET_AVCPQ; 204 else if (of_property_read_bool(q_node, "snps,route-ptp")) 205 plat->rx_queues_cfg[queue].pkt_route = PACKET_PTPQ; 206 else if (of_property_read_bool(q_node, "snps,route-dcbcp")) 207 plat->rx_queues_cfg[queue].pkt_route = PACKET_DCBCPQ; 208 else if (of_property_read_bool(q_node, "snps,route-up")) 209 plat->rx_queues_cfg[queue].pkt_route = PACKET_UPQ; 210 else if (of_property_read_bool(q_node, "snps,route-multi-broad")) 211 plat->rx_queues_cfg[queue].pkt_route = PACKET_MCBCQ; 212 else 213 plat->rx_queues_cfg[queue].pkt_route = 0x0; 214 215 queue++; 216 } 217 if (queue != plat->rx_queues_to_use) { 218 ret = -EINVAL; 219 dev_err(&pdev->dev, "Not all RX queues were configured\n"); 220 goto out; 221 } 222 223 /* Processing TX queues common config */ 224 if (of_property_read_u32(tx_node, "snps,tx-queues-to-use", 225 &plat->tx_queues_to_use)) 226 plat->tx_queues_to_use = 1; 227 228 if (of_property_read_bool(tx_node, "snps,tx-sched-wrr")) 229 plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WRR; 230 else if (of_property_read_bool(tx_node, "snps,tx-sched-wfq")) 231 plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WFQ; 232 else if (of_property_read_bool(tx_node, "snps,tx-sched-dwrr")) 233 plat->tx_sched_algorithm = MTL_TX_ALGORITHM_DWRR; 234 else 235 plat->tx_sched_algorithm = MTL_TX_ALGORITHM_SP; 236 237 queue = 0; 238 239 /* Processing individual TX queue config */ 240 for_each_child_of_node(tx_node, q_node) { 241 if (queue >= plat->tx_queues_to_use) 242 break; 243 244 if (of_property_read_u32(q_node, "snps,weight", 245 &plat->tx_queues_cfg[queue].weight)) 246 plat->tx_queues_cfg[queue].weight = 0x10 + queue; 247 248 if (of_property_read_bool(q_node, "snps,dcb-algorithm")) { 249 plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB; 250 } else if (of_property_read_bool(q_node, 251 "snps,avb-algorithm")) { 252 plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_AVB; 253 254 /* Credit Base Shaper parameters used by AVB */ 255 if (of_property_read_u32(q_node, "snps,send_slope", 256 &plat->tx_queues_cfg[queue].send_slope)) 257 plat->tx_queues_cfg[queue].send_slope = 0x0; 258 if (of_property_read_u32(q_node, "snps,idle_slope", 259 &plat->tx_queues_cfg[queue].idle_slope)) 260 plat->tx_queues_cfg[queue].idle_slope = 0x0; 261 if (of_property_read_u32(q_node, "snps,high_credit", 262 &plat->tx_queues_cfg[queue].high_credit)) 263 plat->tx_queues_cfg[queue].high_credit = 0x0; 264 if (of_property_read_u32(q_node, "snps,low_credit", 265 &plat->tx_queues_cfg[queue].low_credit)) 266 plat->tx_queues_cfg[queue].low_credit = 0x0; 267 } else { 268 plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB; 269 } 270 271 if (of_property_read_u32(q_node, "snps,priority", 272 &plat->tx_queues_cfg[queue].prio)) { 273 plat->tx_queues_cfg[queue].prio = 0; 274 plat->tx_queues_cfg[queue].use_prio = false; 275 } else { 276 plat->tx_queues_cfg[queue].use_prio = true; 277 } 278 279 plat->tx_queues_cfg[queue].coe_unsupported = 280 of_property_read_bool(q_node, "snps,coe-unsupported"); 281 282 queue++; 283 } 284 if (queue != plat->tx_queues_to_use) { 285 ret = -EINVAL; 286 dev_err(&pdev->dev, "Not all TX queues were configured\n"); 287 goto out; 288 } 289 290 out: 291 of_node_put(rx_node); 292 of_node_put(tx_node); 293 of_node_put(q_node); 294 295 return ret; 296 } 297 298 /** 299 * stmmac_dt_phy - parse device-tree driver parameters to allocate PHY resources 300 * @plat: driver data platform structure 301 * @np: device tree node 302 * @dev: device pointer 303 * Description: 304 * The mdio bus will be allocated in case of a phy transceiver is on board; 305 * it will be NULL if the fixed-link is configured. 306 * If there is the "snps,dwmac-mdio" sub-node the mdio will be allocated 307 * in any case (for DSA, mdio must be registered even if fixed-link). 308 * The table below sums the supported configurations: 309 * ------------------------------- 310 * snps,phy-addr | Y 311 * ------------------------------- 312 * phy-handle | Y 313 * ------------------------------- 314 * fixed-link | N 315 * ------------------------------- 316 * snps,dwmac-mdio | 317 * even if | Y 318 * fixed-link | 319 * ------------------------------- 320 * 321 * It returns 0 in case of success otherwise -ENODEV. 322 */ 323 static int stmmac_dt_phy(struct plat_stmmacenet_data *plat, 324 struct device_node *np, struct device *dev) 325 { 326 bool mdio = !of_phy_is_fixed_link(np); 327 static const struct of_device_id need_mdio_ids[] = { 328 { .compatible = "snps,dwc-qos-ethernet-4.10" }, 329 {}, 330 }; 331 332 if (of_match_node(need_mdio_ids, np)) { 333 plat->mdio_node = of_get_child_by_name(np, "mdio"); 334 } else { 335 /** 336 * If snps,dwmac-mdio is passed from DT, always register 337 * the MDIO 338 */ 339 for_each_child_of_node(np, plat->mdio_node) { 340 if (of_device_is_compatible(plat->mdio_node, 341 "snps,dwmac-mdio")) 342 break; 343 } 344 } 345 346 if (plat->mdio_node) { 347 dev_dbg(dev, "Found MDIO subnode\n"); 348 mdio = true; 349 } 350 351 if (mdio) { 352 plat->mdio_bus_data = 353 devm_kzalloc(dev, sizeof(struct stmmac_mdio_bus_data), 354 GFP_KERNEL); 355 if (!plat->mdio_bus_data) 356 return -ENOMEM; 357 358 plat->mdio_bus_data->needs_reset = true; 359 } 360 361 return 0; 362 } 363 364 /** 365 * stmmac_of_get_mac_mode - retrieves the interface of the MAC 366 * @np: - device-tree node 367 * Description: 368 * Similar to `of_get_phy_mode()`, this function will retrieve (from 369 * the device-tree) the interface mode on the MAC side. This assumes 370 * that there is mode converter in-between the MAC & PHY 371 * (e.g. GMII-to-RGMII). 372 */ 373 static int stmmac_of_get_mac_mode(struct device_node *np) 374 { 375 const char *pm; 376 int err, i; 377 378 err = of_property_read_string(np, "mac-mode", &pm); 379 if (err < 0) 380 return err; 381 382 for (i = 0; i < PHY_INTERFACE_MODE_MAX; i++) { 383 if (!strcasecmp(pm, phy_modes(i))) 384 return i; 385 } 386 387 return -ENODEV; 388 } 389 390 /** 391 * stmmac_probe_config_dt - parse device-tree driver parameters 392 * @pdev: platform_device structure 393 * @mac: MAC address to use 394 * Description: 395 * this function is to read the driver parameters from device-tree and 396 * set some private fields that will be used by the main at runtime. 397 */ 398 struct plat_stmmacenet_data * 399 stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac) 400 { 401 struct device_node *np = pdev->dev.of_node; 402 struct plat_stmmacenet_data *plat; 403 struct stmmac_dma_cfg *dma_cfg; 404 int phy_mode; 405 void *ret; 406 int rc; 407 408 plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL); 409 if (!plat) 410 return ERR_PTR(-ENOMEM); 411 412 rc = of_get_mac_address(np, mac); 413 if (rc) { 414 if (rc == -EPROBE_DEFER) 415 return ERR_PTR(rc); 416 417 eth_zero_addr(mac); 418 } 419 420 phy_mode = device_get_phy_mode(&pdev->dev); 421 if (phy_mode < 0) 422 return ERR_PTR(phy_mode); 423 424 plat->phy_interface = phy_mode; 425 rc = stmmac_of_get_mac_mode(np); 426 plat->mac_interface = rc < 0 ? plat->phy_interface : rc; 427 428 /* Some wrapper drivers still rely on phy_node. Let's save it while 429 * they are not converted to phylink. */ 430 plat->phy_node = of_parse_phandle(np, "phy-handle", 0); 431 432 /* PHYLINK automatically parses the phy-handle property */ 433 plat->port_node = of_fwnode_handle(np); 434 435 /* Get max speed of operation from device tree */ 436 of_property_read_u32(np, "max-speed", &plat->max_speed); 437 438 plat->bus_id = of_alias_get_id(np, "ethernet"); 439 if (plat->bus_id < 0) 440 plat->bus_id = 0; 441 442 /* Default to phy auto-detection */ 443 plat->phy_addr = -1; 444 445 /* Default to get clk_csr from stmmac_clk_csr_set(), 446 * or get clk_csr from device tree. 447 */ 448 plat->clk_csr = -1; 449 if (of_property_read_u32(np, "snps,clk-csr", &plat->clk_csr)) 450 of_property_read_u32(np, "clk_csr", &plat->clk_csr); 451 452 /* "snps,phy-addr" is not a standard property. Mark it as deprecated 453 * and warn of its use. Remove this when phy node support is added. 454 */ 455 if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0) 456 dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n"); 457 458 /* To Configure PHY by using all device-tree supported properties */ 459 rc = stmmac_dt_phy(plat, np, &pdev->dev); 460 if (rc) 461 return ERR_PTR(rc); 462 463 of_property_read_u32(np, "tx-fifo-depth", &plat->tx_fifo_size); 464 465 of_property_read_u32(np, "rx-fifo-depth", &plat->rx_fifo_size); 466 467 plat->force_sf_dma_mode = 468 of_property_read_bool(np, "snps,force_sf_dma_mode"); 469 470 if (of_property_read_bool(np, "snps,en-tx-lpi-clockgating")) 471 plat->flags |= STMMAC_FLAG_EN_TX_LPI_CLOCKGATING; 472 473 /* Set the maxmtu to a default of JUMBO_LEN in case the 474 * parameter is not present in the device tree. 475 */ 476 plat->maxmtu = JUMBO_LEN; 477 478 /* Set default value for multicast hash bins */ 479 plat->multicast_filter_bins = HASH_TABLE_SIZE; 480 481 /* Set default value for unicast filter entries */ 482 plat->unicast_filter_entries = 1; 483 484 /* 485 * Currently only the properties needed on SPEAr600 486 * are provided. All other properties should be added 487 * once needed on other platforms. 488 */ 489 if (of_device_is_compatible(np, "st,spear600-gmac") || 490 of_device_is_compatible(np, "snps,dwmac-3.50a") || 491 of_device_is_compatible(np, "snps,dwmac-3.70a") || 492 of_device_is_compatible(np, "snps,dwmac")) { 493 /* Note that the max-frame-size parameter as defined in the 494 * ePAPR v1.1 spec is defined as max-frame-size, it's 495 * actually used as the IEEE definition of MAC Client 496 * data, or MTU. The ePAPR specification is confusing as 497 * the definition is max-frame-size, but usage examples 498 * are clearly MTUs 499 */ 500 of_property_read_u32(np, "max-frame-size", &plat->maxmtu); 501 of_property_read_u32(np, "snps,multicast-filter-bins", 502 &plat->multicast_filter_bins); 503 of_property_read_u32(np, "snps,perfect-filter-entries", 504 &plat->unicast_filter_entries); 505 plat->unicast_filter_entries = dwmac1000_validate_ucast_entries( 506 &pdev->dev, plat->unicast_filter_entries); 507 plat->multicast_filter_bins = dwmac1000_validate_mcast_bins( 508 &pdev->dev, plat->multicast_filter_bins); 509 plat->has_gmac = 1; 510 plat->pmt = 1; 511 } 512 513 if (of_device_is_compatible(np, "snps,dwmac-3.40a")) { 514 plat->has_gmac = 1; 515 plat->enh_desc = 1; 516 plat->tx_coe = 1; 517 plat->bugged_jumbo = 1; 518 plat->pmt = 1; 519 } 520 521 if (of_device_is_compatible(np, "snps,dwmac-4.00") || 522 of_device_is_compatible(np, "snps,dwmac-4.10a") || 523 of_device_is_compatible(np, "snps,dwmac-4.20a") || 524 of_device_is_compatible(np, "snps,dwmac-5.10a") || 525 of_device_is_compatible(np, "snps,dwmac-5.20")) { 526 plat->has_gmac4 = 1; 527 plat->has_gmac = 0; 528 plat->pmt = 1; 529 if (of_property_read_bool(np, "snps,tso")) 530 plat->flags |= STMMAC_FLAG_TSO_EN; 531 } 532 533 if (of_device_is_compatible(np, "snps,dwmac-3.610") || 534 of_device_is_compatible(np, "snps,dwmac-3.710")) { 535 plat->enh_desc = 1; 536 plat->bugged_jumbo = 1; 537 plat->force_sf_dma_mode = 1; 538 } 539 540 if (of_device_is_compatible(np, "snps,dwxgmac")) { 541 plat->has_xgmac = 1; 542 plat->pmt = 1; 543 if (of_property_read_bool(np, "snps,tso")) 544 plat->flags |= STMMAC_FLAG_TSO_EN; 545 } 546 547 dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*dma_cfg), 548 GFP_KERNEL); 549 if (!dma_cfg) { 550 stmmac_remove_config_dt(pdev, plat); 551 return ERR_PTR(-ENOMEM); 552 } 553 plat->dma_cfg = dma_cfg; 554 555 of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl); 556 if (!dma_cfg->pbl) 557 dma_cfg->pbl = DEFAULT_DMA_PBL; 558 of_property_read_u32(np, "snps,txpbl", &dma_cfg->txpbl); 559 of_property_read_u32(np, "snps,rxpbl", &dma_cfg->rxpbl); 560 dma_cfg->pblx8 = !of_property_read_bool(np, "snps,no-pbl-x8"); 561 562 dma_cfg->aal = of_property_read_bool(np, "snps,aal"); 563 dma_cfg->fixed_burst = of_property_read_bool(np, "snps,fixed-burst"); 564 dma_cfg->mixed_burst = of_property_read_bool(np, "snps,mixed-burst"); 565 566 plat->force_thresh_dma_mode = of_property_read_bool(np, "snps,force_thresh_dma_mode"); 567 if (plat->force_thresh_dma_mode && plat->force_sf_dma_mode) { 568 plat->force_sf_dma_mode = 0; 569 dev_warn(&pdev->dev, 570 "force_sf_dma_mode is ignored if force_thresh_dma_mode is set.\n"); 571 } 572 573 of_property_read_u32(np, "snps,ps-speed", &plat->mac_port_sel_speed); 574 575 plat->axi = stmmac_axi_setup(pdev); 576 577 rc = stmmac_mtl_setup(pdev, plat); 578 if (rc) { 579 stmmac_remove_config_dt(pdev, plat); 580 return ERR_PTR(rc); 581 } 582 583 /* clock setup */ 584 if (!of_device_is_compatible(np, "snps,dwc-qos-ethernet-4.10")) { 585 plat->stmmac_clk = devm_clk_get(&pdev->dev, 586 STMMAC_RESOURCE_NAME); 587 if (IS_ERR(plat->stmmac_clk)) { 588 dev_warn(&pdev->dev, "Cannot get CSR clock\n"); 589 plat->stmmac_clk = NULL; 590 } 591 clk_prepare_enable(plat->stmmac_clk); 592 } 593 594 plat->pclk = devm_clk_get_optional(&pdev->dev, "pclk"); 595 if (IS_ERR(plat->pclk)) { 596 ret = plat->pclk; 597 goto error_pclk_get; 598 } 599 clk_prepare_enable(plat->pclk); 600 601 /* Fall-back to main clock in case of no PTP ref is passed */ 602 plat->clk_ptp_ref = devm_clk_get(&pdev->dev, "ptp_ref"); 603 if (IS_ERR(plat->clk_ptp_ref)) { 604 plat->clk_ptp_rate = clk_get_rate(plat->stmmac_clk); 605 plat->clk_ptp_ref = NULL; 606 dev_info(&pdev->dev, "PTP uses main clock\n"); 607 } else { 608 plat->clk_ptp_rate = clk_get_rate(plat->clk_ptp_ref); 609 dev_dbg(&pdev->dev, "PTP rate %d\n", plat->clk_ptp_rate); 610 } 611 612 plat->stmmac_rst = devm_reset_control_get_optional(&pdev->dev, 613 STMMAC_RESOURCE_NAME); 614 if (IS_ERR(plat->stmmac_rst)) { 615 ret = plat->stmmac_rst; 616 goto error_hw_init; 617 } 618 619 plat->stmmac_ahb_rst = devm_reset_control_get_optional_shared( 620 &pdev->dev, "ahb"); 621 if (IS_ERR(plat->stmmac_ahb_rst)) { 622 ret = plat->stmmac_ahb_rst; 623 goto error_hw_init; 624 } 625 626 return plat; 627 628 error_hw_init: 629 clk_disable_unprepare(plat->pclk); 630 error_pclk_get: 631 clk_disable_unprepare(plat->stmmac_clk); 632 633 return ret; 634 } 635 636 static void devm_stmmac_remove_config_dt(void *data) 637 { 638 struct plat_stmmacenet_data *plat = data; 639 640 /* Platform data argument is unused */ 641 stmmac_remove_config_dt(NULL, plat); 642 } 643 644 /** 645 * devm_stmmac_probe_config_dt 646 * @pdev: platform_device structure 647 * @mac: MAC address to use 648 * Description: Devres variant of stmmac_probe_config_dt(). Does not require 649 * the user to call stmmac_remove_config_dt() at driver detach. 650 */ 651 struct plat_stmmacenet_data * 652 devm_stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac) 653 { 654 struct plat_stmmacenet_data *plat; 655 int ret; 656 657 plat = stmmac_probe_config_dt(pdev, mac); 658 if (IS_ERR(plat)) 659 return plat; 660 661 ret = devm_add_action_or_reset(&pdev->dev, 662 devm_stmmac_remove_config_dt, plat); 663 if (ret) 664 return ERR_PTR(ret); 665 666 return plat; 667 } 668 669 /** 670 * stmmac_remove_config_dt - undo the effects of stmmac_probe_config_dt() 671 * @pdev: platform_device structure 672 * @plat: driver data platform structure 673 * 674 * Release resources claimed by stmmac_probe_config_dt(). 675 */ 676 void stmmac_remove_config_dt(struct platform_device *pdev, 677 struct plat_stmmacenet_data *plat) 678 { 679 clk_disable_unprepare(plat->stmmac_clk); 680 clk_disable_unprepare(plat->pclk); 681 of_node_put(plat->phy_node); 682 of_node_put(plat->mdio_node); 683 } 684 #else 685 struct plat_stmmacenet_data * 686 stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac) 687 { 688 return ERR_PTR(-EINVAL); 689 } 690 691 struct plat_stmmacenet_data * 692 devm_stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac) 693 { 694 return ERR_PTR(-EINVAL); 695 } 696 697 void stmmac_remove_config_dt(struct platform_device *pdev, 698 struct plat_stmmacenet_data *plat) 699 { 700 } 701 #endif /* CONFIG_OF */ 702 EXPORT_SYMBOL_GPL(stmmac_probe_config_dt); 703 EXPORT_SYMBOL_GPL(devm_stmmac_probe_config_dt); 704 EXPORT_SYMBOL_GPL(stmmac_remove_config_dt); 705 706 int stmmac_get_platform_resources(struct platform_device *pdev, 707 struct stmmac_resources *stmmac_res) 708 { 709 memset(stmmac_res, 0, sizeof(*stmmac_res)); 710 711 /* Get IRQ information early to have an ability to ask for deferred 712 * probe if needed before we went too far with resource allocation. 713 */ 714 stmmac_res->irq = platform_get_irq_byname(pdev, "macirq"); 715 if (stmmac_res->irq < 0) 716 return stmmac_res->irq; 717 718 /* On some platforms e.g. SPEAr the wake up irq differs from the mac irq 719 * The external wake up irq can be passed through the platform code 720 * named as "eth_wake_irq" 721 * 722 * In case the wake up interrupt is not passed from the platform 723 * so the driver will continue to use the mac irq (ndev->irq) 724 */ 725 stmmac_res->wol_irq = 726 platform_get_irq_byname_optional(pdev, "eth_wake_irq"); 727 if (stmmac_res->wol_irq < 0) { 728 if (stmmac_res->wol_irq == -EPROBE_DEFER) 729 return -EPROBE_DEFER; 730 dev_info(&pdev->dev, "IRQ eth_wake_irq not found\n"); 731 stmmac_res->wol_irq = stmmac_res->irq; 732 } 733 734 stmmac_res->lpi_irq = 735 platform_get_irq_byname_optional(pdev, "eth_lpi"); 736 if (stmmac_res->lpi_irq < 0) { 737 if (stmmac_res->lpi_irq == -EPROBE_DEFER) 738 return -EPROBE_DEFER; 739 dev_info(&pdev->dev, "IRQ eth_lpi not found\n"); 740 } 741 742 stmmac_res->addr = devm_platform_ioremap_resource(pdev, 0); 743 744 return PTR_ERR_OR_ZERO(stmmac_res->addr); 745 } 746 EXPORT_SYMBOL_GPL(stmmac_get_platform_resources); 747 748 /** 749 * stmmac_pltfr_init 750 * @pdev: pointer to the platform device 751 * @plat: driver data platform structure 752 * Description: Call the platform's init callback (if any) and propagate 753 * the return value. 754 */ 755 int stmmac_pltfr_init(struct platform_device *pdev, 756 struct plat_stmmacenet_data *plat) 757 { 758 int ret = 0; 759 760 if (plat->init) 761 ret = plat->init(pdev, plat->bsp_priv); 762 763 return ret; 764 } 765 EXPORT_SYMBOL_GPL(stmmac_pltfr_init); 766 767 /** 768 * stmmac_pltfr_exit 769 * @pdev: pointer to the platform device 770 * @plat: driver data platform structure 771 * Description: Call the platform's exit callback (if any). 772 */ 773 void stmmac_pltfr_exit(struct platform_device *pdev, 774 struct plat_stmmacenet_data *plat) 775 { 776 if (plat->exit) 777 plat->exit(pdev, plat->bsp_priv); 778 } 779 EXPORT_SYMBOL_GPL(stmmac_pltfr_exit); 780 781 /** 782 * stmmac_pltfr_probe 783 * @pdev: platform device pointer 784 * @plat: driver data platform structure 785 * @res: stmmac resources structure 786 * Description: This calls the platform's init() callback and probes the 787 * stmmac driver. 788 */ 789 int stmmac_pltfr_probe(struct platform_device *pdev, 790 struct plat_stmmacenet_data *plat, 791 struct stmmac_resources *res) 792 { 793 int ret; 794 795 ret = stmmac_pltfr_init(pdev, plat); 796 if (ret) 797 return ret; 798 799 ret = stmmac_dvr_probe(&pdev->dev, plat, res); 800 if (ret) { 801 stmmac_pltfr_exit(pdev, plat); 802 return ret; 803 } 804 805 return ret; 806 } 807 EXPORT_SYMBOL_GPL(stmmac_pltfr_probe); 808 809 static void devm_stmmac_pltfr_remove(void *data) 810 { 811 struct platform_device *pdev = data; 812 813 stmmac_pltfr_remove(pdev); 814 } 815 816 /** 817 * devm_stmmac_pltfr_probe 818 * @pdev: pointer to the platform device 819 * @plat: driver data platform structure 820 * @res: stmmac resources 821 * Description: Devres variant of stmmac_pltfr_probe(). Allows users to skip 822 * calling stmmac_pltfr_remove() on driver detach. 823 */ 824 int devm_stmmac_pltfr_probe(struct platform_device *pdev, 825 struct plat_stmmacenet_data *plat, 826 struct stmmac_resources *res) 827 { 828 int ret; 829 830 ret = stmmac_pltfr_probe(pdev, plat, res); 831 if (ret) 832 return ret; 833 834 return devm_add_action_or_reset(&pdev->dev, devm_stmmac_pltfr_remove, 835 pdev); 836 } 837 EXPORT_SYMBOL_GPL(devm_stmmac_pltfr_probe); 838 839 /** 840 * stmmac_pltfr_remove 841 * @pdev: pointer to the platform device 842 * Description: This undoes the effects of stmmac_pltfr_probe() by removing the 843 * driver and calling the platform's exit() callback. 844 */ 845 void stmmac_pltfr_remove(struct platform_device *pdev) 846 { 847 struct net_device *ndev = platform_get_drvdata(pdev); 848 struct stmmac_priv *priv = netdev_priv(ndev); 849 struct plat_stmmacenet_data *plat = priv->plat; 850 851 stmmac_dvr_remove(&pdev->dev); 852 stmmac_pltfr_exit(pdev, plat); 853 } 854 EXPORT_SYMBOL_GPL(stmmac_pltfr_remove); 855 856 /** 857 * stmmac_pltfr_suspend 858 * @dev: device pointer 859 * Description: this function is invoked when suspend the driver and it direcly 860 * call the main suspend function and then, if required, on some platform, it 861 * can call an exit helper. 862 */ 863 static int __maybe_unused stmmac_pltfr_suspend(struct device *dev) 864 { 865 int ret; 866 struct net_device *ndev = dev_get_drvdata(dev); 867 struct stmmac_priv *priv = netdev_priv(ndev); 868 struct platform_device *pdev = to_platform_device(dev); 869 870 ret = stmmac_suspend(dev); 871 stmmac_pltfr_exit(pdev, priv->plat); 872 873 return ret; 874 } 875 876 /** 877 * stmmac_pltfr_resume 878 * @dev: device pointer 879 * Description: this function is invoked when resume the driver before calling 880 * the main resume function, on some platforms, it can call own init helper 881 * if required. 882 */ 883 static int __maybe_unused stmmac_pltfr_resume(struct device *dev) 884 { 885 struct net_device *ndev = dev_get_drvdata(dev); 886 struct stmmac_priv *priv = netdev_priv(ndev); 887 struct platform_device *pdev = to_platform_device(dev); 888 int ret; 889 890 ret = stmmac_pltfr_init(pdev, priv->plat); 891 if (ret) 892 return ret; 893 894 return stmmac_resume(dev); 895 } 896 897 static int __maybe_unused stmmac_runtime_suspend(struct device *dev) 898 { 899 struct net_device *ndev = dev_get_drvdata(dev); 900 struct stmmac_priv *priv = netdev_priv(ndev); 901 902 stmmac_bus_clks_config(priv, false); 903 904 return 0; 905 } 906 907 static int __maybe_unused stmmac_runtime_resume(struct device *dev) 908 { 909 struct net_device *ndev = dev_get_drvdata(dev); 910 struct stmmac_priv *priv = netdev_priv(ndev); 911 912 return stmmac_bus_clks_config(priv, true); 913 } 914 915 static int __maybe_unused stmmac_pltfr_noirq_suspend(struct device *dev) 916 { 917 struct net_device *ndev = dev_get_drvdata(dev); 918 struct stmmac_priv *priv = netdev_priv(ndev); 919 int ret; 920 921 if (!netif_running(ndev)) 922 return 0; 923 924 if (!device_may_wakeup(priv->device) || !priv->plat->pmt) { 925 /* Disable clock in case of PWM is off */ 926 clk_disable_unprepare(priv->plat->clk_ptp_ref); 927 928 ret = pm_runtime_force_suspend(dev); 929 if (ret) 930 return ret; 931 } 932 933 return 0; 934 } 935 936 static int __maybe_unused stmmac_pltfr_noirq_resume(struct device *dev) 937 { 938 struct net_device *ndev = dev_get_drvdata(dev); 939 struct stmmac_priv *priv = netdev_priv(ndev); 940 int ret; 941 942 if (!netif_running(ndev)) 943 return 0; 944 945 if (!device_may_wakeup(priv->device) || !priv->plat->pmt) { 946 /* enable the clk previously disabled */ 947 ret = pm_runtime_force_resume(dev); 948 if (ret) 949 return ret; 950 951 ret = clk_prepare_enable(priv->plat->clk_ptp_ref); 952 if (ret < 0) { 953 netdev_warn(priv->dev, 954 "failed to enable PTP reference clock: %pe\n", 955 ERR_PTR(ret)); 956 return ret; 957 } 958 } 959 960 return 0; 961 } 962 963 const struct dev_pm_ops stmmac_pltfr_pm_ops = { 964 SET_SYSTEM_SLEEP_PM_OPS(stmmac_pltfr_suspend, stmmac_pltfr_resume) 965 SET_RUNTIME_PM_OPS(stmmac_runtime_suspend, stmmac_runtime_resume, NULL) 966 SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(stmmac_pltfr_noirq_suspend, stmmac_pltfr_noirq_resume) 967 }; 968 EXPORT_SYMBOL_GPL(stmmac_pltfr_pm_ops); 969 970 MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet platform support"); 971 MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>"); 972 MODULE_LICENSE("GPL"); 973