1 // SPDX-License-Identifier: GPL-2.0-only 2 /******************************************************************************* 3 This contains the functions to handle the platform driver. 4 5 Copyright (C) 2007-2011 STMicroelectronics Ltd 6 7 8 Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> 9 *******************************************************************************/ 10 11 #include <linux/platform_device.h> 12 #include <linux/pm_runtime.h> 13 #include <linux/module.h> 14 #include <linux/io.h> 15 #include <linux/of.h> 16 #include <linux/of_net.h> 17 #include <linux/of_device.h> 18 #include <linux/of_mdio.h> 19 20 #include "stmmac.h" 21 #include "stmmac_platform.h" 22 23 #ifdef CONFIG_OF 24 25 /** 26 * dwmac1000_validate_mcast_bins - validates the number of Multicast filter bins 27 * @dev: struct device of the platform device 28 * @mcast_bins: Multicast filtering bins 29 * Description: 30 * this function validates the number of Multicast filtering bins specified 31 * by the configuration through the device tree. The Synopsys GMAC supports 32 * 64 bins, 128 bins, or 256 bins. "bins" refer to the division of CRC 33 * number space. 64 bins correspond to 6 bits of the CRC, 128 corresponds 34 * to 7 bits, and 256 refers to 8 bits of the CRC. Any other setting is 35 * invalid and will cause the filtering algorithm to use Multicast 36 * promiscuous mode. 37 */ 38 static int dwmac1000_validate_mcast_bins(struct device *dev, int mcast_bins) 39 { 40 int x = mcast_bins; 41 42 switch (x) { 43 case HASH_TABLE_SIZE: 44 case 128: 45 case 256: 46 break; 47 default: 48 x = 0; 49 dev_info(dev, "Hash table entries set to unexpected value %d\n", 50 mcast_bins); 51 break; 52 } 53 return x; 54 } 55 56 /** 57 * dwmac1000_validate_ucast_entries - validate the Unicast address entries 58 * @dev: struct device of the platform device 59 * @ucast_entries: number of Unicast address entries 60 * Description: 61 * This function validates the number of Unicast address entries supported 62 * by a particular Synopsys 10/100/1000 controller. The Synopsys controller 63 * supports 1..32, 64, or 128 Unicast filter entries for it's Unicast filter 64 * logic. This function validates a valid, supported configuration is 65 * selected, and defaults to 1 Unicast address if an unsupported 66 * configuration is selected. 67 */ 68 static int dwmac1000_validate_ucast_entries(struct device *dev, 69 int ucast_entries) 70 { 71 int x = ucast_entries; 72 73 switch (x) { 74 case 1 ... 32: 75 case 64: 76 case 128: 77 break; 78 default: 79 x = 1; 80 dev_info(dev, "Unicast table entries set to unexpected value %d\n", 81 ucast_entries); 82 break; 83 } 84 return x; 85 } 86 87 /** 88 * stmmac_axi_setup - parse DT parameters for programming the AXI register 89 * @pdev: platform device 90 * Description: 91 * if required, from device-tree the AXI internal register can be tuned 92 * by using platform parameters. 93 */ 94 static struct stmmac_axi *stmmac_axi_setup(struct platform_device *pdev) 95 { 96 struct device_node *np; 97 struct stmmac_axi *axi; 98 99 np = of_parse_phandle(pdev->dev.of_node, "snps,axi-config", 0); 100 if (!np) 101 return NULL; 102 103 axi = devm_kzalloc(&pdev->dev, sizeof(*axi), GFP_KERNEL); 104 if (!axi) { 105 of_node_put(np); 106 return ERR_PTR(-ENOMEM); 107 } 108 109 axi->axi_lpi_en = of_property_read_bool(np, "snps,lpi_en"); 110 axi->axi_xit_frm = of_property_read_bool(np, "snps,xit_frm"); 111 axi->axi_kbbe = of_property_read_bool(np, "snps,axi_kbbe"); 112 axi->axi_fb = of_property_read_bool(np, "snps,axi_fb"); 113 axi->axi_mb = of_property_read_bool(np, "snps,axi_mb"); 114 axi->axi_rb = of_property_read_bool(np, "snps,axi_rb"); 115 116 if (of_property_read_u32(np, "snps,wr_osr_lmt", &axi->axi_wr_osr_lmt)) 117 axi->axi_wr_osr_lmt = 1; 118 if (of_property_read_u32(np, "snps,rd_osr_lmt", &axi->axi_rd_osr_lmt)) 119 axi->axi_rd_osr_lmt = 1; 120 of_property_read_u32_array(np, "snps,blen", axi->axi_blen, AXI_BLEN); 121 of_node_put(np); 122 123 return axi; 124 } 125 126 /** 127 * stmmac_mtl_setup - parse DT parameters for multiple queues configuration 128 * @pdev: platform device 129 * @plat: enet data 130 */ 131 static int stmmac_mtl_setup(struct platform_device *pdev, 132 struct plat_stmmacenet_data *plat) 133 { 134 struct device_node *q_node; 135 struct device_node *rx_node; 136 struct device_node *tx_node; 137 u8 queue = 0; 138 int ret = 0; 139 140 /* For backwards-compatibility with device trees that don't have any 141 * snps,mtl-rx-config or snps,mtl-tx-config properties, we fall back 142 * to one RX and TX queues each. 143 */ 144 plat->rx_queues_to_use = 1; 145 plat->tx_queues_to_use = 1; 146 147 /* First Queue must always be in DCB mode. As MTL_QUEUE_DCB = 1 we need 148 * to always set this, otherwise Queue will be classified as AVB 149 * (because MTL_QUEUE_AVB = 0). 150 */ 151 plat->rx_queues_cfg[0].mode_to_use = MTL_QUEUE_DCB; 152 plat->tx_queues_cfg[0].mode_to_use = MTL_QUEUE_DCB; 153 154 rx_node = of_parse_phandle(pdev->dev.of_node, "snps,mtl-rx-config", 0); 155 if (!rx_node) 156 return ret; 157 158 tx_node = of_parse_phandle(pdev->dev.of_node, "snps,mtl-tx-config", 0); 159 if (!tx_node) { 160 of_node_put(rx_node); 161 return ret; 162 } 163 164 /* Processing RX queues common config */ 165 if (of_property_read_u32(rx_node, "snps,rx-queues-to-use", 166 &plat->rx_queues_to_use)) 167 plat->rx_queues_to_use = 1; 168 169 if (of_property_read_bool(rx_node, "snps,rx-sched-sp")) 170 plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP; 171 else if (of_property_read_bool(rx_node, "snps,rx-sched-wsp")) 172 plat->rx_sched_algorithm = MTL_RX_ALGORITHM_WSP; 173 else 174 plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP; 175 176 /* Processing individual RX queue config */ 177 for_each_child_of_node(rx_node, q_node) { 178 if (queue >= plat->rx_queues_to_use) 179 break; 180 181 if (of_property_read_bool(q_node, "snps,dcb-algorithm")) 182 plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB; 183 else if (of_property_read_bool(q_node, "snps,avb-algorithm")) 184 plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_AVB; 185 else 186 plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB; 187 188 if (of_property_read_u32(q_node, "snps,map-to-dma-channel", 189 &plat->rx_queues_cfg[queue].chan)) 190 plat->rx_queues_cfg[queue].chan = queue; 191 /* TODO: Dynamic mapping to be included in the future */ 192 193 if (of_property_read_u32(q_node, "snps,priority", 194 &plat->rx_queues_cfg[queue].prio)) { 195 plat->rx_queues_cfg[queue].prio = 0; 196 plat->rx_queues_cfg[queue].use_prio = false; 197 } else { 198 plat->rx_queues_cfg[queue].use_prio = true; 199 } 200 201 /* RX queue specific packet type routing */ 202 if (of_property_read_bool(q_node, "snps,route-avcp")) 203 plat->rx_queues_cfg[queue].pkt_route = PACKET_AVCPQ; 204 else if (of_property_read_bool(q_node, "snps,route-ptp")) 205 plat->rx_queues_cfg[queue].pkt_route = PACKET_PTPQ; 206 else if (of_property_read_bool(q_node, "snps,route-dcbcp")) 207 plat->rx_queues_cfg[queue].pkt_route = PACKET_DCBCPQ; 208 else if (of_property_read_bool(q_node, "snps,route-up")) 209 plat->rx_queues_cfg[queue].pkt_route = PACKET_UPQ; 210 else if (of_property_read_bool(q_node, "snps,route-multi-broad")) 211 plat->rx_queues_cfg[queue].pkt_route = PACKET_MCBCQ; 212 else 213 plat->rx_queues_cfg[queue].pkt_route = 0x0; 214 215 queue++; 216 } 217 if (queue != plat->rx_queues_to_use) { 218 ret = -EINVAL; 219 dev_err(&pdev->dev, "Not all RX queues were configured\n"); 220 goto out; 221 } 222 223 /* Processing TX queues common config */ 224 if (of_property_read_u32(tx_node, "snps,tx-queues-to-use", 225 &plat->tx_queues_to_use)) 226 plat->tx_queues_to_use = 1; 227 228 if (of_property_read_bool(tx_node, "snps,tx-sched-wrr")) 229 plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WRR; 230 else if (of_property_read_bool(tx_node, "snps,tx-sched-wfq")) 231 plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WFQ; 232 else if (of_property_read_bool(tx_node, "snps,tx-sched-dwrr")) 233 plat->tx_sched_algorithm = MTL_TX_ALGORITHM_DWRR; 234 else 235 plat->tx_sched_algorithm = MTL_TX_ALGORITHM_SP; 236 237 queue = 0; 238 239 /* Processing individual TX queue config */ 240 for_each_child_of_node(tx_node, q_node) { 241 if (queue >= plat->tx_queues_to_use) 242 break; 243 244 if (of_property_read_u32(q_node, "snps,weight", 245 &plat->tx_queues_cfg[queue].weight)) 246 plat->tx_queues_cfg[queue].weight = 0x10 + queue; 247 248 if (of_property_read_bool(q_node, "snps,dcb-algorithm")) { 249 plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB; 250 } else if (of_property_read_bool(q_node, 251 "snps,avb-algorithm")) { 252 plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_AVB; 253 254 /* Credit Base Shaper parameters used by AVB */ 255 if (of_property_read_u32(q_node, "snps,send_slope", 256 &plat->tx_queues_cfg[queue].send_slope)) 257 plat->tx_queues_cfg[queue].send_slope = 0x0; 258 if (of_property_read_u32(q_node, "snps,idle_slope", 259 &plat->tx_queues_cfg[queue].idle_slope)) 260 plat->tx_queues_cfg[queue].idle_slope = 0x0; 261 if (of_property_read_u32(q_node, "snps,high_credit", 262 &plat->tx_queues_cfg[queue].high_credit)) 263 plat->tx_queues_cfg[queue].high_credit = 0x0; 264 if (of_property_read_u32(q_node, "snps,low_credit", 265 &plat->tx_queues_cfg[queue].low_credit)) 266 plat->tx_queues_cfg[queue].low_credit = 0x0; 267 } else { 268 plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB; 269 } 270 271 if (of_property_read_u32(q_node, "snps,priority", 272 &plat->tx_queues_cfg[queue].prio)) { 273 plat->tx_queues_cfg[queue].prio = 0; 274 plat->tx_queues_cfg[queue].use_prio = false; 275 } else { 276 plat->tx_queues_cfg[queue].use_prio = true; 277 } 278 279 queue++; 280 } 281 if (queue != plat->tx_queues_to_use) { 282 ret = -EINVAL; 283 dev_err(&pdev->dev, "Not all TX queues were configured\n"); 284 goto out; 285 } 286 287 out: 288 of_node_put(rx_node); 289 of_node_put(tx_node); 290 of_node_put(q_node); 291 292 return ret; 293 } 294 295 /** 296 * stmmac_dt_phy - parse device-tree driver parameters to allocate PHY resources 297 * @plat: driver data platform structure 298 * @np: device tree node 299 * @dev: device pointer 300 * Description: 301 * The mdio bus will be allocated in case of a phy transceiver is on board; 302 * it will be NULL if the fixed-link is configured. 303 * If there is the "snps,dwmac-mdio" sub-node the mdio will be allocated 304 * in any case (for DSA, mdio must be registered even if fixed-link). 305 * The table below sums the supported configurations: 306 * ------------------------------- 307 * snps,phy-addr | Y 308 * ------------------------------- 309 * phy-handle | Y 310 * ------------------------------- 311 * fixed-link | N 312 * ------------------------------- 313 * snps,dwmac-mdio | 314 * even if | Y 315 * fixed-link | 316 * ------------------------------- 317 * 318 * It returns 0 in case of success otherwise -ENODEV. 319 */ 320 static int stmmac_dt_phy(struct plat_stmmacenet_data *plat, 321 struct device_node *np, struct device *dev) 322 { 323 bool mdio = !of_phy_is_fixed_link(np); 324 static const struct of_device_id need_mdio_ids[] = { 325 { .compatible = "snps,dwc-qos-ethernet-4.10" }, 326 {}, 327 }; 328 329 if (of_match_node(need_mdio_ids, np)) { 330 plat->mdio_node = of_get_child_by_name(np, "mdio"); 331 } else { 332 /** 333 * If snps,dwmac-mdio is passed from DT, always register 334 * the MDIO 335 */ 336 for_each_child_of_node(np, plat->mdio_node) { 337 if (of_device_is_compatible(plat->mdio_node, 338 "snps,dwmac-mdio")) 339 break; 340 } 341 } 342 343 if (plat->mdio_node) { 344 dev_dbg(dev, "Found MDIO subnode\n"); 345 mdio = true; 346 } 347 348 if (mdio) { 349 plat->mdio_bus_data = 350 devm_kzalloc(dev, sizeof(struct stmmac_mdio_bus_data), 351 GFP_KERNEL); 352 if (!plat->mdio_bus_data) 353 return -ENOMEM; 354 355 plat->mdio_bus_data->needs_reset = true; 356 } 357 358 return 0; 359 } 360 361 /** 362 * stmmac_of_get_mac_mode - retrieves the interface of the MAC 363 * @np: - device-tree node 364 * Description: 365 * Similar to `of_get_phy_mode()`, this function will retrieve (from 366 * the device-tree) the interface mode on the MAC side. This assumes 367 * that there is mode converter in-between the MAC & PHY 368 * (e.g. GMII-to-RGMII). 369 */ 370 static int stmmac_of_get_mac_mode(struct device_node *np) 371 { 372 const char *pm; 373 int err, i; 374 375 err = of_property_read_string(np, "mac-mode", &pm); 376 if (err < 0) 377 return err; 378 379 for (i = 0; i < PHY_INTERFACE_MODE_MAX; i++) { 380 if (!strcasecmp(pm, phy_modes(i))) 381 return i; 382 } 383 384 return -ENODEV; 385 } 386 387 /** 388 * stmmac_probe_config_dt - parse device-tree driver parameters 389 * @pdev: platform_device structure 390 * @mac: MAC address to use 391 * Description: 392 * this function is to read the driver parameters from device-tree and 393 * set some private fields that will be used by the main at runtime. 394 */ 395 struct plat_stmmacenet_data * 396 stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac) 397 { 398 struct device_node *np = pdev->dev.of_node; 399 struct plat_stmmacenet_data *plat; 400 struct stmmac_dma_cfg *dma_cfg; 401 int phy_mode; 402 void *ret; 403 int rc; 404 405 plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL); 406 if (!plat) 407 return ERR_PTR(-ENOMEM); 408 409 rc = of_get_mac_address(np, mac); 410 if (rc) { 411 if (rc == -EPROBE_DEFER) 412 return ERR_PTR(rc); 413 414 eth_zero_addr(mac); 415 } 416 417 phy_mode = device_get_phy_mode(&pdev->dev); 418 if (phy_mode < 0) 419 return ERR_PTR(phy_mode); 420 421 plat->phy_interface = phy_mode; 422 plat->interface = stmmac_of_get_mac_mode(np); 423 if (plat->interface < 0) 424 plat->interface = plat->phy_interface; 425 426 /* Some wrapper drivers still rely on phy_node. Let's save it while 427 * they are not converted to phylink. */ 428 plat->phy_node = of_parse_phandle(np, "phy-handle", 0); 429 430 /* PHYLINK automatically parses the phy-handle property */ 431 plat->phylink_node = np; 432 433 /* Get max speed of operation from device tree */ 434 of_property_read_u32(np, "max-speed", &plat->max_speed); 435 436 plat->bus_id = of_alias_get_id(np, "ethernet"); 437 if (plat->bus_id < 0) 438 plat->bus_id = 0; 439 440 /* Default to phy auto-detection */ 441 plat->phy_addr = -1; 442 443 /* Default to get clk_csr from stmmac_clk_crs_set(), 444 * or get clk_csr from device tree. 445 */ 446 plat->clk_csr = -1; 447 of_property_read_u32(np, "clk_csr", &plat->clk_csr); 448 449 /* "snps,phy-addr" is not a standard property. Mark it as deprecated 450 * and warn of its use. Remove this when phy node support is added. 451 */ 452 if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0) 453 dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n"); 454 455 /* To Configure PHY by using all device-tree supported properties */ 456 rc = stmmac_dt_phy(plat, np, &pdev->dev); 457 if (rc) 458 return ERR_PTR(rc); 459 460 of_property_read_u32(np, "tx-fifo-depth", &plat->tx_fifo_size); 461 462 of_property_read_u32(np, "rx-fifo-depth", &plat->rx_fifo_size); 463 464 plat->force_sf_dma_mode = 465 of_property_read_bool(np, "snps,force_sf_dma_mode"); 466 467 plat->en_tx_lpi_clockgating = 468 of_property_read_bool(np, "snps,en-tx-lpi-clockgating"); 469 470 /* Set the maxmtu to a default of JUMBO_LEN in case the 471 * parameter is not present in the device tree. 472 */ 473 plat->maxmtu = JUMBO_LEN; 474 475 /* Set default value for multicast hash bins */ 476 plat->multicast_filter_bins = HASH_TABLE_SIZE; 477 478 /* Set default value for unicast filter entries */ 479 plat->unicast_filter_entries = 1; 480 481 /* 482 * Currently only the properties needed on SPEAr600 483 * are provided. All other properties should be added 484 * once needed on other platforms. 485 */ 486 if (of_device_is_compatible(np, "st,spear600-gmac") || 487 of_device_is_compatible(np, "snps,dwmac-3.50a") || 488 of_device_is_compatible(np, "snps,dwmac-3.70a") || 489 of_device_is_compatible(np, "snps,dwmac")) { 490 /* Note that the max-frame-size parameter as defined in the 491 * ePAPR v1.1 spec is defined as max-frame-size, it's 492 * actually used as the IEEE definition of MAC Client 493 * data, or MTU. The ePAPR specification is confusing as 494 * the definition is max-frame-size, but usage examples 495 * are clearly MTUs 496 */ 497 of_property_read_u32(np, "max-frame-size", &plat->maxmtu); 498 of_property_read_u32(np, "snps,multicast-filter-bins", 499 &plat->multicast_filter_bins); 500 of_property_read_u32(np, "snps,perfect-filter-entries", 501 &plat->unicast_filter_entries); 502 plat->unicast_filter_entries = dwmac1000_validate_ucast_entries( 503 &pdev->dev, plat->unicast_filter_entries); 504 plat->multicast_filter_bins = dwmac1000_validate_mcast_bins( 505 &pdev->dev, plat->multicast_filter_bins); 506 plat->has_gmac = 1; 507 plat->pmt = 1; 508 } 509 510 if (of_device_is_compatible(np, "snps,dwmac-3.40a")) { 511 plat->has_gmac = 1; 512 plat->enh_desc = 1; 513 plat->tx_coe = 1; 514 plat->bugged_jumbo = 1; 515 plat->pmt = 1; 516 } 517 518 if (of_device_is_compatible(np, "snps,dwmac-4.00") || 519 of_device_is_compatible(np, "snps,dwmac-4.10a") || 520 of_device_is_compatible(np, "snps,dwmac-4.20a") || 521 of_device_is_compatible(np, "snps,dwmac-5.10a")) { 522 plat->has_gmac4 = 1; 523 plat->has_gmac = 0; 524 plat->pmt = 1; 525 plat->tso_en = of_property_read_bool(np, "snps,tso"); 526 } 527 528 if (of_device_is_compatible(np, "snps,dwmac-3.610") || 529 of_device_is_compatible(np, "snps,dwmac-3.710")) { 530 plat->enh_desc = 1; 531 plat->bugged_jumbo = 1; 532 plat->force_sf_dma_mode = 1; 533 } 534 535 if (of_device_is_compatible(np, "snps,dwxgmac")) { 536 plat->has_xgmac = 1; 537 plat->pmt = 1; 538 plat->tso_en = of_property_read_bool(np, "snps,tso"); 539 } 540 541 dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*dma_cfg), 542 GFP_KERNEL); 543 if (!dma_cfg) { 544 stmmac_remove_config_dt(pdev, plat); 545 return ERR_PTR(-ENOMEM); 546 } 547 plat->dma_cfg = dma_cfg; 548 549 of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl); 550 if (!dma_cfg->pbl) 551 dma_cfg->pbl = DEFAULT_DMA_PBL; 552 of_property_read_u32(np, "snps,txpbl", &dma_cfg->txpbl); 553 of_property_read_u32(np, "snps,rxpbl", &dma_cfg->rxpbl); 554 dma_cfg->pblx8 = !of_property_read_bool(np, "snps,no-pbl-x8"); 555 556 dma_cfg->aal = of_property_read_bool(np, "snps,aal"); 557 dma_cfg->fixed_burst = of_property_read_bool(np, "snps,fixed-burst"); 558 dma_cfg->mixed_burst = of_property_read_bool(np, "snps,mixed-burst"); 559 560 plat->force_thresh_dma_mode = of_property_read_bool(np, "snps,force_thresh_dma_mode"); 561 if (plat->force_thresh_dma_mode) { 562 plat->force_sf_dma_mode = 0; 563 dev_warn(&pdev->dev, 564 "force_sf_dma_mode is ignored if force_thresh_dma_mode is set.\n"); 565 } 566 567 of_property_read_u32(np, "snps,ps-speed", &plat->mac_port_sel_speed); 568 569 plat->axi = stmmac_axi_setup(pdev); 570 571 rc = stmmac_mtl_setup(pdev, plat); 572 if (rc) { 573 stmmac_remove_config_dt(pdev, plat); 574 return ERR_PTR(rc); 575 } 576 577 /* clock setup */ 578 if (!of_device_is_compatible(np, "snps,dwc-qos-ethernet-4.10")) { 579 plat->stmmac_clk = devm_clk_get(&pdev->dev, 580 STMMAC_RESOURCE_NAME); 581 if (IS_ERR(plat->stmmac_clk)) { 582 dev_warn(&pdev->dev, "Cannot get CSR clock\n"); 583 plat->stmmac_clk = NULL; 584 } 585 clk_prepare_enable(plat->stmmac_clk); 586 } 587 588 plat->pclk = devm_clk_get_optional(&pdev->dev, "pclk"); 589 if (IS_ERR(plat->pclk)) { 590 ret = plat->pclk; 591 goto error_pclk_get; 592 } 593 clk_prepare_enable(plat->pclk); 594 595 /* Fall-back to main clock in case of no PTP ref is passed */ 596 plat->clk_ptp_ref = devm_clk_get(&pdev->dev, "ptp_ref"); 597 if (IS_ERR(plat->clk_ptp_ref)) { 598 plat->clk_ptp_rate = clk_get_rate(plat->stmmac_clk); 599 plat->clk_ptp_ref = NULL; 600 dev_info(&pdev->dev, "PTP uses main clock\n"); 601 } else { 602 plat->clk_ptp_rate = clk_get_rate(plat->clk_ptp_ref); 603 dev_dbg(&pdev->dev, "PTP rate %d\n", plat->clk_ptp_rate); 604 } 605 606 plat->stmmac_rst = devm_reset_control_get_optional(&pdev->dev, 607 STMMAC_RESOURCE_NAME); 608 if (IS_ERR(plat->stmmac_rst)) { 609 ret = plat->stmmac_rst; 610 goto error_hw_init; 611 } 612 613 plat->stmmac_ahb_rst = devm_reset_control_get_optional_shared( 614 &pdev->dev, "ahb"); 615 if (IS_ERR(plat->stmmac_ahb_rst)) { 616 ret = plat->stmmac_ahb_rst; 617 goto error_hw_init; 618 } 619 620 return plat; 621 622 error_hw_init: 623 clk_disable_unprepare(plat->pclk); 624 error_pclk_get: 625 clk_disable_unprepare(plat->stmmac_clk); 626 627 return ret; 628 } 629 630 /** 631 * stmmac_remove_config_dt - undo the effects of stmmac_probe_config_dt() 632 * @pdev: platform_device structure 633 * @plat: driver data platform structure 634 * 635 * Release resources claimed by stmmac_probe_config_dt(). 636 */ 637 void stmmac_remove_config_dt(struct platform_device *pdev, 638 struct plat_stmmacenet_data *plat) 639 { 640 clk_disable_unprepare(plat->stmmac_clk); 641 clk_disable_unprepare(plat->pclk); 642 of_node_put(plat->phy_node); 643 of_node_put(plat->mdio_node); 644 } 645 #else 646 struct plat_stmmacenet_data * 647 stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac) 648 { 649 return ERR_PTR(-EINVAL); 650 } 651 652 void stmmac_remove_config_dt(struct platform_device *pdev, 653 struct plat_stmmacenet_data *plat) 654 { 655 } 656 #endif /* CONFIG_OF */ 657 EXPORT_SYMBOL_GPL(stmmac_probe_config_dt); 658 EXPORT_SYMBOL_GPL(stmmac_remove_config_dt); 659 660 int stmmac_get_platform_resources(struct platform_device *pdev, 661 struct stmmac_resources *stmmac_res) 662 { 663 memset(stmmac_res, 0, sizeof(*stmmac_res)); 664 665 /* Get IRQ information early to have an ability to ask for deferred 666 * probe if needed before we went too far with resource allocation. 667 */ 668 stmmac_res->irq = platform_get_irq_byname(pdev, "macirq"); 669 if (stmmac_res->irq < 0) 670 return stmmac_res->irq; 671 672 /* On some platforms e.g. SPEAr the wake up irq differs from the mac irq 673 * The external wake up irq can be passed through the platform code 674 * named as "eth_wake_irq" 675 * 676 * In case the wake up interrupt is not passed from the platform 677 * so the driver will continue to use the mac irq (ndev->irq) 678 */ 679 stmmac_res->wol_irq = 680 platform_get_irq_byname_optional(pdev, "eth_wake_irq"); 681 if (stmmac_res->wol_irq < 0) { 682 if (stmmac_res->wol_irq == -EPROBE_DEFER) 683 return -EPROBE_DEFER; 684 dev_info(&pdev->dev, "IRQ eth_wake_irq not found\n"); 685 stmmac_res->wol_irq = stmmac_res->irq; 686 } 687 688 stmmac_res->lpi_irq = 689 platform_get_irq_byname_optional(pdev, "eth_lpi"); 690 if (stmmac_res->lpi_irq < 0) { 691 if (stmmac_res->lpi_irq == -EPROBE_DEFER) 692 return -EPROBE_DEFER; 693 dev_info(&pdev->dev, "IRQ eth_lpi not found\n"); 694 } 695 696 stmmac_res->addr = devm_platform_ioremap_resource(pdev, 0); 697 698 return PTR_ERR_OR_ZERO(stmmac_res->addr); 699 } 700 EXPORT_SYMBOL_GPL(stmmac_get_platform_resources); 701 702 /** 703 * stmmac_pltfr_remove 704 * @pdev: platform device pointer 705 * Description: this function calls the main to free the net resources 706 * and calls the platforms hook and release the resources (e.g. mem). 707 */ 708 int stmmac_pltfr_remove(struct platform_device *pdev) 709 { 710 struct net_device *ndev = platform_get_drvdata(pdev); 711 struct stmmac_priv *priv = netdev_priv(ndev); 712 struct plat_stmmacenet_data *plat = priv->plat; 713 int ret = stmmac_dvr_remove(&pdev->dev); 714 715 if (plat->exit) 716 plat->exit(pdev, plat->bsp_priv); 717 718 stmmac_remove_config_dt(pdev, plat); 719 720 return ret; 721 } 722 EXPORT_SYMBOL_GPL(stmmac_pltfr_remove); 723 724 /** 725 * stmmac_pltfr_suspend 726 * @dev: device pointer 727 * Description: this function is invoked when suspend the driver and it direcly 728 * call the main suspend function and then, if required, on some platform, it 729 * can call an exit helper. 730 */ 731 static int __maybe_unused stmmac_pltfr_suspend(struct device *dev) 732 { 733 int ret; 734 struct net_device *ndev = dev_get_drvdata(dev); 735 struct stmmac_priv *priv = netdev_priv(ndev); 736 struct platform_device *pdev = to_platform_device(dev); 737 738 ret = stmmac_suspend(dev); 739 if (priv->plat->exit) 740 priv->plat->exit(pdev, priv->plat->bsp_priv); 741 742 return ret; 743 } 744 745 /** 746 * stmmac_pltfr_resume 747 * @dev: device pointer 748 * Description: this function is invoked when resume the driver before calling 749 * the main resume function, on some platforms, it can call own init helper 750 * if required. 751 */ 752 static int __maybe_unused stmmac_pltfr_resume(struct device *dev) 753 { 754 struct net_device *ndev = dev_get_drvdata(dev); 755 struct stmmac_priv *priv = netdev_priv(ndev); 756 struct platform_device *pdev = to_platform_device(dev); 757 758 if (priv->plat->init) 759 priv->plat->init(pdev, priv->plat->bsp_priv); 760 761 return stmmac_resume(dev); 762 } 763 764 static int __maybe_unused stmmac_runtime_suspend(struct device *dev) 765 { 766 struct net_device *ndev = dev_get_drvdata(dev); 767 struct stmmac_priv *priv = netdev_priv(ndev); 768 769 stmmac_bus_clks_config(priv, false); 770 771 return 0; 772 } 773 774 static int __maybe_unused stmmac_runtime_resume(struct device *dev) 775 { 776 struct net_device *ndev = dev_get_drvdata(dev); 777 struct stmmac_priv *priv = netdev_priv(ndev); 778 779 return stmmac_bus_clks_config(priv, true); 780 } 781 782 static int __maybe_unused stmmac_pltfr_noirq_suspend(struct device *dev) 783 { 784 struct net_device *ndev = dev_get_drvdata(dev); 785 struct stmmac_priv *priv = netdev_priv(ndev); 786 int ret; 787 788 if (!netif_running(ndev)) 789 return 0; 790 791 if (!device_may_wakeup(priv->device) || !priv->plat->pmt) { 792 /* Disable clock in case of PWM is off */ 793 clk_disable_unprepare(priv->plat->clk_ptp_ref); 794 795 ret = pm_runtime_force_suspend(dev); 796 if (ret) 797 return ret; 798 } 799 800 return 0; 801 } 802 803 static int __maybe_unused stmmac_pltfr_noirq_resume(struct device *dev) 804 { 805 struct net_device *ndev = dev_get_drvdata(dev); 806 struct stmmac_priv *priv = netdev_priv(ndev); 807 int ret; 808 809 if (!netif_running(ndev)) 810 return 0; 811 812 if (!device_may_wakeup(priv->device) || !priv->plat->pmt) { 813 /* enable the clk previously disabled */ 814 ret = pm_runtime_force_resume(dev); 815 if (ret) 816 return ret; 817 818 ret = clk_prepare_enable(priv->plat->clk_ptp_ref); 819 if (ret < 0) { 820 netdev_warn(priv->dev, 821 "failed to enable PTP reference clock: %pe\n", 822 ERR_PTR(ret)); 823 return ret; 824 } 825 } 826 827 return 0; 828 } 829 830 const struct dev_pm_ops stmmac_pltfr_pm_ops = { 831 SET_SYSTEM_SLEEP_PM_OPS(stmmac_pltfr_suspend, stmmac_pltfr_resume) 832 SET_RUNTIME_PM_OPS(stmmac_runtime_suspend, stmmac_runtime_resume, NULL) 833 SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(stmmac_pltfr_noirq_suspend, stmmac_pltfr_noirq_resume) 834 }; 835 EXPORT_SYMBOL_GPL(stmmac_pltfr_pm_ops); 836 837 MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet platform support"); 838 MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>"); 839 MODULE_LICENSE("GPL"); 840