1 // SPDX-License-Identifier: GPL-2.0-only
2 /*******************************************************************************
3   This contains the functions to handle the pci driver.
4 
5   Copyright (C) 2011-2012  Vayavya Labs Pvt Ltd
6 
7 
8   Author: Rayagond Kokatanur <rayagond@vayavyalabs.com>
9   Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
10 *******************************************************************************/
11 
12 #include <linux/clk-provider.h>
13 #include <linux/pci.h>
14 #include <linux/dmi.h>
15 
16 #include "stmmac.h"
17 
18 struct stmmac_pci_info {
19 	int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat);
20 };
21 
22 static void common_default_data(struct plat_stmmacenet_data *plat)
23 {
24 	plat->clk_csr = 2;	/* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
25 	plat->has_gmac = 1;
26 	plat->force_sf_dma_mode = 1;
27 
28 	plat->mdio_bus_data->needs_reset = true;
29 
30 	/* Set default value for multicast hash bins */
31 	plat->multicast_filter_bins = HASH_TABLE_SIZE;
32 
33 	/* Set default value for unicast filter entries */
34 	plat->unicast_filter_entries = 1;
35 
36 	/* Set the maxmtu to a default of JUMBO_LEN */
37 	plat->maxmtu = JUMBO_LEN;
38 
39 	/* Set default number of RX and TX queues to use */
40 	plat->tx_queues_to_use = 1;
41 	plat->rx_queues_to_use = 1;
42 
43 	/* Disable Priority config by default */
44 	plat->tx_queues_cfg[0].use_prio = false;
45 	plat->rx_queues_cfg[0].use_prio = false;
46 
47 	/* Disable RX queues routing by default */
48 	plat->rx_queues_cfg[0].pkt_route = 0x0;
49 }
50 
51 static int stmmac_default_data(struct pci_dev *pdev,
52 			       struct plat_stmmacenet_data *plat)
53 {
54 	/* Set common default data first */
55 	common_default_data(plat);
56 
57 	plat->bus_id = 1;
58 	plat->phy_addr = 0;
59 	plat->phy_interface = PHY_INTERFACE_MODE_GMII;
60 
61 	plat->dma_cfg->pbl = 32;
62 	plat->dma_cfg->pblx8 = true;
63 	/* TODO: AXI */
64 
65 	return 0;
66 }
67 
68 static const struct stmmac_pci_info stmmac_pci_info = {
69 	.setup = stmmac_default_data,
70 };
71 
72 static int snps_gmac5_default_data(struct pci_dev *pdev,
73 				   struct plat_stmmacenet_data *plat)
74 {
75 	int i;
76 
77 	plat->clk_csr = 5;
78 	plat->has_gmac4 = 1;
79 	plat->force_sf_dma_mode = 1;
80 	plat->tso_en = 1;
81 	plat->pmt = 1;
82 
83 	/* Set default value for multicast hash bins */
84 	plat->multicast_filter_bins = HASH_TABLE_SIZE;
85 
86 	/* Set default value for unicast filter entries */
87 	plat->unicast_filter_entries = 1;
88 
89 	/* Set the maxmtu to a default of JUMBO_LEN */
90 	plat->maxmtu = JUMBO_LEN;
91 
92 	/* Set default number of RX and TX queues to use */
93 	plat->tx_queues_to_use = 4;
94 	plat->rx_queues_to_use = 4;
95 
96 	plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WRR;
97 	for (i = 0; i < plat->tx_queues_to_use; i++) {
98 		plat->tx_queues_cfg[i].use_prio = false;
99 		plat->tx_queues_cfg[i].mode_to_use = MTL_QUEUE_DCB;
100 		plat->tx_queues_cfg[i].weight = 25;
101 		if (i > 0)
102 			plat->tx_queues_cfg[i].tbs_en = 1;
103 	}
104 
105 	plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP;
106 	for (i = 0; i < plat->rx_queues_to_use; i++) {
107 		plat->rx_queues_cfg[i].use_prio = false;
108 		plat->rx_queues_cfg[i].mode_to_use = MTL_QUEUE_DCB;
109 		plat->rx_queues_cfg[i].pkt_route = 0x0;
110 		plat->rx_queues_cfg[i].chan = i;
111 	}
112 
113 	plat->bus_id = 1;
114 	plat->phy_addr = -1;
115 	plat->phy_interface = PHY_INTERFACE_MODE_GMII;
116 
117 	plat->dma_cfg->pbl = 32;
118 	plat->dma_cfg->pblx8 = true;
119 
120 	/* Axi Configuration */
121 	plat->axi = devm_kzalloc(&pdev->dev, sizeof(*plat->axi), GFP_KERNEL);
122 	if (!plat->axi)
123 		return -ENOMEM;
124 
125 	plat->axi->axi_wr_osr_lmt = 31;
126 	plat->axi->axi_rd_osr_lmt = 31;
127 
128 	plat->axi->axi_fb = false;
129 	plat->axi->axi_blen[0] = 4;
130 	plat->axi->axi_blen[1] = 8;
131 	plat->axi->axi_blen[2] = 16;
132 	plat->axi->axi_blen[3] = 32;
133 
134 	return 0;
135 }
136 
137 static const struct stmmac_pci_info snps_gmac5_pci_info = {
138 	.setup = snps_gmac5_default_data,
139 };
140 
141 /**
142  * stmmac_pci_probe
143  *
144  * @pdev: pci device pointer
145  * @id: pointer to table of device id/id's.
146  *
147  * Description: This probing function gets called for all PCI devices which
148  * match the ID table and are not "owned" by other driver yet. This function
149  * gets passed a "struct pci_dev *" for each device whose entry in the ID table
150  * matches the device. The probe functions returns zero when the driver choose
151  * to take "ownership" of the device or an error code(-ve no) otherwise.
152  */
153 static int stmmac_pci_probe(struct pci_dev *pdev,
154 			    const struct pci_device_id *id)
155 {
156 	struct stmmac_pci_info *info = (struct stmmac_pci_info *)id->driver_data;
157 	struct plat_stmmacenet_data *plat;
158 	struct stmmac_resources res;
159 	int i;
160 	int ret;
161 
162 	plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
163 	if (!plat)
164 		return -ENOMEM;
165 
166 	plat->mdio_bus_data = devm_kzalloc(&pdev->dev,
167 					   sizeof(*plat->mdio_bus_data),
168 					   GFP_KERNEL);
169 	if (!plat->mdio_bus_data)
170 		return -ENOMEM;
171 
172 	plat->dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*plat->dma_cfg),
173 				     GFP_KERNEL);
174 	if (!plat->dma_cfg)
175 		return -ENOMEM;
176 
177 	plat->safety_feat_cfg = devm_kzalloc(&pdev->dev,
178 					     sizeof(*plat->safety_feat_cfg),
179 					     GFP_KERNEL);
180 	if (!plat->safety_feat_cfg)
181 		return -ENOMEM;
182 
183 	/* Enable pci device */
184 	ret = pcim_enable_device(pdev);
185 	if (ret) {
186 		dev_err(&pdev->dev, "%s: ERROR: failed to enable device\n",
187 			__func__);
188 		return ret;
189 	}
190 
191 	/* Get the base address of device */
192 	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
193 		if (pci_resource_len(pdev, i) == 0)
194 			continue;
195 		ret = pcim_iomap_regions(pdev, BIT(i), pci_name(pdev));
196 		if (ret)
197 			return ret;
198 		break;
199 	}
200 
201 	pci_set_master(pdev);
202 
203 	ret = info->setup(pdev, plat);
204 	if (ret)
205 		return ret;
206 
207 	memset(&res, 0, sizeof(res));
208 	res.addr = pcim_iomap_table(pdev)[i];
209 	res.wol_irq = pdev->irq;
210 	res.irq = pdev->irq;
211 
212 	plat->safety_feat_cfg->tsoee = 1;
213 	plat->safety_feat_cfg->mrxpee = 1;
214 	plat->safety_feat_cfg->mestee = 1;
215 	plat->safety_feat_cfg->mrxee = 1;
216 	plat->safety_feat_cfg->mtxee = 1;
217 	plat->safety_feat_cfg->epsi = 1;
218 	plat->safety_feat_cfg->edpp = 1;
219 	plat->safety_feat_cfg->prtyen = 1;
220 	plat->safety_feat_cfg->tmouten = 1;
221 
222 	return stmmac_dvr_probe(&pdev->dev, plat, &res);
223 }
224 
225 /**
226  * stmmac_pci_remove
227  *
228  * @pdev: platform device pointer
229  * Description: this function calls the main to free the net resources
230  * and releases the PCI resources.
231  */
232 static void stmmac_pci_remove(struct pci_dev *pdev)
233 {
234 	int i;
235 
236 	stmmac_dvr_remove(&pdev->dev);
237 
238 	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
239 		if (pci_resource_len(pdev, i) == 0)
240 			continue;
241 		pcim_iounmap_regions(pdev, BIT(i));
242 		break;
243 	}
244 }
245 
246 static int __maybe_unused stmmac_pci_suspend(struct device *dev)
247 {
248 	struct pci_dev *pdev = to_pci_dev(dev);
249 	int ret;
250 
251 	ret = stmmac_suspend(dev);
252 	if (ret)
253 		return ret;
254 
255 	ret = pci_save_state(pdev);
256 	if (ret)
257 		return ret;
258 
259 	pci_disable_device(pdev);
260 	pci_wake_from_d3(pdev, true);
261 	return 0;
262 }
263 
264 static int __maybe_unused stmmac_pci_resume(struct device *dev)
265 {
266 	struct pci_dev *pdev = to_pci_dev(dev);
267 	int ret;
268 
269 	pci_restore_state(pdev);
270 	pci_set_power_state(pdev, PCI_D0);
271 
272 	ret = pci_enable_device(pdev);
273 	if (ret)
274 		return ret;
275 
276 	pci_set_master(pdev);
277 
278 	return stmmac_resume(dev);
279 }
280 
281 static SIMPLE_DEV_PM_OPS(stmmac_pm_ops, stmmac_pci_suspend, stmmac_pci_resume);
282 
283 /* synthetic ID, no official vendor */
284 #define PCI_VENDOR_ID_STMMAC		0x0700
285 
286 #define PCI_DEVICE_ID_STMMAC_STMMAC		0x1108
287 #define PCI_DEVICE_ID_SYNOPSYS_GMAC5_ID		0x7102
288 
289 static const struct pci_device_id stmmac_id_table[] = {
290 	{ PCI_DEVICE_DATA(STMMAC, STMMAC, &stmmac_pci_info) },
291 	{ PCI_DEVICE_DATA(STMICRO, MAC, &stmmac_pci_info) },
292 	{ PCI_DEVICE_DATA(SYNOPSYS, GMAC5_ID, &snps_gmac5_pci_info) },
293 	{}
294 };
295 
296 MODULE_DEVICE_TABLE(pci, stmmac_id_table);
297 
298 static struct pci_driver stmmac_pci_driver = {
299 	.name = STMMAC_RESOURCE_NAME,
300 	.id_table = stmmac_id_table,
301 	.probe = stmmac_pci_probe,
302 	.remove = stmmac_pci_remove,
303 	.driver         = {
304 		.pm     = &stmmac_pm_ops,
305 	},
306 };
307 
308 module_pci_driver(stmmac_pci_driver);
309 
310 MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet PCI driver");
311 MODULE_AUTHOR("Rayagond Kokatanur <rayagond.kokatanur@vayavyalabs.com>");
312 MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
313 MODULE_LICENSE("GPL");
314