1 /******************************************************************************* 2 STMMAC Ethernet Driver -- MDIO bus implementation 3 Provides Bus interface for MII registers 4 5 Copyright (C) 2007-2009 STMicroelectronics Ltd 6 7 This program is free software; you can redistribute it and/or modify it 8 under the terms and conditions of the GNU General Public License, 9 version 2, as published by the Free Software Foundation. 10 11 This program is distributed in the hope it will be useful, but WITHOUT 12 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 13 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 14 more details. 15 16 You should have received a copy of the GNU General Public License along with 17 this program; if not, write to the Free Software Foundation, Inc., 18 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 19 20 The full GNU General Public License is included in this distribution in 21 the file called "COPYING". 22 23 Author: Carl Shaw <carl.shaw@st.com> 24 Maintainer: Giuseppe Cavallaro <peppe.cavallaro@st.com> 25 *******************************************************************************/ 26 27 #include <linux/mii.h> 28 #include <linux/phy.h> 29 #include <linux/slab.h> 30 #include <linux/of.h> 31 #include <linux/of_gpio.h> 32 33 #include <asm/io.h> 34 35 #include "stmmac.h" 36 37 #define MII_BUSY 0x00000001 38 #define MII_WRITE 0x00000002 39 40 static int stmmac_mdio_busy_wait(void __iomem *ioaddr, unsigned int mii_addr) 41 { 42 unsigned long curr; 43 unsigned long finish = jiffies + 3 * HZ; 44 45 do { 46 curr = jiffies; 47 if (readl(ioaddr + mii_addr) & MII_BUSY) 48 cpu_relax(); 49 else 50 return 0; 51 } while (!time_after_eq(curr, finish)); 52 53 return -EBUSY; 54 } 55 56 /** 57 * stmmac_mdio_read 58 * @bus: points to the mii_bus structure 59 * @phyaddr: MII addr reg bits 15-11 60 * @phyreg: MII addr reg bits 10-6 61 * Description: it reads data from the MII register from within the phy device. 62 * For the 7111 GMAC, we must set the bit 0 in the MII address register while 63 * accessing the PHY registers. 64 * Fortunately, it seems this has no drawback for the 7109 MAC. 65 */ 66 static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg) 67 { 68 struct net_device *ndev = bus->priv; 69 struct stmmac_priv *priv = netdev_priv(ndev); 70 unsigned int mii_address = priv->hw->mii.addr; 71 unsigned int mii_data = priv->hw->mii.data; 72 73 int data; 74 u16 regValue = (((phyaddr << 11) & (0x0000F800)) | 75 ((phyreg << 6) & (0x000007C0))); 76 regValue |= MII_BUSY | ((priv->clk_csr & 0xF) << 2); 77 78 if (stmmac_mdio_busy_wait(priv->ioaddr, mii_address)) 79 return -EBUSY; 80 81 writel(regValue, priv->ioaddr + mii_address); 82 83 if (stmmac_mdio_busy_wait(priv->ioaddr, mii_address)) 84 return -EBUSY; 85 86 /* Read the data from the MII data register */ 87 data = (int)readl(priv->ioaddr + mii_data); 88 89 return data; 90 } 91 92 /** 93 * stmmac_mdio_write 94 * @bus: points to the mii_bus structure 95 * @phyaddr: MII addr reg bits 15-11 96 * @phyreg: MII addr reg bits 10-6 97 * @phydata: phy data 98 * Description: it writes the data into the MII register from within the device. 99 */ 100 static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg, 101 u16 phydata) 102 { 103 struct net_device *ndev = bus->priv; 104 struct stmmac_priv *priv = netdev_priv(ndev); 105 unsigned int mii_address = priv->hw->mii.addr; 106 unsigned int mii_data = priv->hw->mii.data; 107 108 u16 value = 109 (((phyaddr << 11) & (0x0000F800)) | ((phyreg << 6) & (0x000007C0))) 110 | MII_WRITE; 111 112 value |= MII_BUSY | ((priv->clk_csr & 0xF) << 2); 113 114 /* Wait until any existing MII operation is complete */ 115 if (stmmac_mdio_busy_wait(priv->ioaddr, mii_address)) 116 return -EBUSY; 117 118 /* Set the MII address register to write */ 119 writel(phydata, priv->ioaddr + mii_data); 120 writel(value, priv->ioaddr + mii_address); 121 122 /* Wait until any existing MII operation is complete */ 123 return stmmac_mdio_busy_wait(priv->ioaddr, mii_address); 124 } 125 126 /** 127 * stmmac_mdio_reset 128 * @bus: points to the mii_bus structure 129 * Description: reset the MII bus 130 */ 131 static int stmmac_mdio_reset(struct mii_bus *bus) 132 { 133 #if defined(CONFIG_STMMAC_PLATFORM) 134 struct net_device *ndev = bus->priv; 135 struct stmmac_priv *priv = netdev_priv(ndev); 136 unsigned int mii_address = priv->hw->mii.addr; 137 struct stmmac_mdio_bus_data *data = priv->plat->mdio_bus_data; 138 139 #ifdef CONFIG_OF 140 if (priv->device->of_node) { 141 int reset_gpio, active_low; 142 143 if (data->reset_gpio < 0) { 144 struct device_node *np = priv->device->of_node; 145 if (!np) 146 return 0; 147 148 data->reset_gpio = of_get_named_gpio(np, 149 "snps,reset-gpio", 0); 150 if (data->reset_gpio < 0) 151 return 0; 152 153 data->active_low = of_property_read_bool(np, 154 "snps,reset-active-low"); 155 of_property_read_u32_array(np, 156 "snps,reset-delays-us", data->delays, 3); 157 } 158 159 reset_gpio = data->reset_gpio; 160 active_low = data->active_low; 161 162 if (!gpio_request(reset_gpio, "mdio-reset")) { 163 gpio_direction_output(reset_gpio, active_low ? 1 : 0); 164 udelay(data->delays[0]); 165 gpio_set_value(reset_gpio, active_low ? 0 : 1); 166 udelay(data->delays[1]); 167 gpio_set_value(reset_gpio, active_low ? 1 : 0); 168 udelay(data->delays[2]); 169 gpio_free(reset_gpio); 170 } 171 } 172 #endif 173 174 if (data->phy_reset) { 175 pr_debug("stmmac_mdio_reset: calling phy_reset\n"); 176 data->phy_reset(priv->plat->bsp_priv); 177 } 178 179 /* This is a workaround for problems with the STE101P PHY. 180 * It doesn't complete its reset until at least one clock cycle 181 * on MDC, so perform a dummy mdio read. 182 */ 183 writel(0, priv->ioaddr + mii_address); 184 #endif 185 return 0; 186 } 187 188 /** 189 * stmmac_mdio_register 190 * @ndev: net device structure 191 * Description: it registers the MII bus 192 */ 193 int stmmac_mdio_register(struct net_device *ndev) 194 { 195 int err = 0; 196 struct mii_bus *new_bus; 197 int *irqlist; 198 struct stmmac_priv *priv = netdev_priv(ndev); 199 struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat->mdio_bus_data; 200 int addr, found; 201 202 if (!mdio_bus_data) 203 return 0; 204 205 new_bus = mdiobus_alloc(); 206 if (new_bus == NULL) 207 return -ENOMEM; 208 209 if (mdio_bus_data->irqs) 210 irqlist = mdio_bus_data->irqs; 211 else 212 irqlist = priv->mii_irq; 213 214 #ifdef CONFIG_OF 215 if (priv->device->of_node) 216 mdio_bus_data->reset_gpio = -1; 217 #endif 218 219 new_bus->name = "stmmac"; 220 new_bus->read = &stmmac_mdio_read; 221 new_bus->write = &stmmac_mdio_write; 222 new_bus->reset = &stmmac_mdio_reset; 223 snprintf(new_bus->id, MII_BUS_ID_SIZE, "%s-%x", 224 new_bus->name, priv->plat->bus_id); 225 new_bus->priv = ndev; 226 new_bus->irq = irqlist; 227 new_bus->phy_mask = mdio_bus_data->phy_mask; 228 new_bus->parent = priv->device; 229 err = mdiobus_register(new_bus); 230 if (err != 0) { 231 pr_err("%s: Cannot register as MDIO bus\n", new_bus->name); 232 goto bus_register_fail; 233 } 234 235 found = 0; 236 for (addr = 0; addr < PHY_MAX_ADDR; addr++) { 237 struct phy_device *phydev = new_bus->phy_map[addr]; 238 if (phydev) { 239 int act = 0; 240 char irq_num[4]; 241 char *irq_str; 242 243 /* 244 * If an IRQ was provided to be assigned after 245 * the bus probe, do it here. 246 */ 247 if ((mdio_bus_data->irqs == NULL) && 248 (mdio_bus_data->probed_phy_irq > 0)) { 249 irqlist[addr] = mdio_bus_data->probed_phy_irq; 250 phydev->irq = mdio_bus_data->probed_phy_irq; 251 } 252 253 /* 254 * If we're going to bind the MAC to this PHY bus, 255 * and no PHY number was provided to the MAC, 256 * use the one probed here. 257 */ 258 if (priv->plat->phy_addr == -1) 259 priv->plat->phy_addr = addr; 260 261 act = (priv->plat->phy_addr == addr); 262 switch (phydev->irq) { 263 case PHY_POLL: 264 irq_str = "POLL"; 265 break; 266 case PHY_IGNORE_INTERRUPT: 267 irq_str = "IGNORE"; 268 break; 269 default: 270 sprintf(irq_num, "%d", phydev->irq); 271 irq_str = irq_num; 272 break; 273 } 274 pr_info("%s: PHY ID %08x at %d IRQ %s (%s)%s\n", 275 ndev->name, phydev->phy_id, addr, 276 irq_str, dev_name(&phydev->dev), 277 act ? " active" : ""); 278 found = 1; 279 } 280 } 281 282 if (!found) { 283 pr_warning("%s: No PHY found\n", ndev->name); 284 mdiobus_unregister(new_bus); 285 mdiobus_free(new_bus); 286 return -ENODEV; 287 } 288 289 priv->mii = new_bus; 290 291 return 0; 292 293 bus_register_fail: 294 mdiobus_free(new_bus); 295 return err; 296 } 297 298 /** 299 * stmmac_mdio_unregister 300 * @ndev: net device structure 301 * Description: it unregisters the MII bus 302 */ 303 int stmmac_mdio_unregister(struct net_device *ndev) 304 { 305 struct stmmac_priv *priv = netdev_priv(ndev); 306 307 if (!priv->mii) 308 return 0; 309 310 mdiobus_unregister(priv->mii); 311 priv->mii->priv = NULL; 312 mdiobus_free(priv->mii); 313 priv->mii = NULL; 314 315 return 0; 316 } 317