1 // SPDX-License-Identifier: GPL-2.0-only
2 /*******************************************************************************
3   Copyright (C) 2007-2009  STMicroelectronics Ltd
4 
5 
6   Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
7 *******************************************************************************/
8 
9 #include <linux/io.h>
10 #include <linux/iopoll.h>
11 #include "common.h"
12 #include "dwmac_dma.h"
13 
14 #define GMAC_HI_REG_AE		0x80000000
15 
16 int dwmac_dma_reset(void __iomem *ioaddr)
17 {
18 	u32 value = readl(ioaddr + DMA_BUS_MODE);
19 
20 	/* DMA SW reset */
21 	value |= DMA_BUS_MODE_SFT_RESET;
22 	writel(value, ioaddr + DMA_BUS_MODE);
23 
24 	return readl_poll_timeout(ioaddr + DMA_BUS_MODE, value,
25 				 !(value & DMA_BUS_MODE_SFT_RESET),
26 				 10000, 200000);
27 }
28 
29 /* CSR1 enables the transmit DMA to check for new descriptor */
30 void dwmac_enable_dma_transmission(void __iomem *ioaddr)
31 {
32 	writel(1, ioaddr + DMA_XMT_POLL_DEMAND);
33 }
34 
35 void dwmac_enable_dma_irq(void __iomem *ioaddr, u32 chan, bool rx, bool tx)
36 {
37 	u32 value = readl(ioaddr + DMA_INTR_ENA);
38 
39 	if (rx)
40 		value |= DMA_INTR_DEFAULT_RX;
41 	if (tx)
42 		value |= DMA_INTR_DEFAULT_TX;
43 
44 	writel(value, ioaddr + DMA_INTR_ENA);
45 }
46 
47 void dwmac_disable_dma_irq(void __iomem *ioaddr, u32 chan, bool rx, bool tx)
48 {
49 	u32 value = readl(ioaddr + DMA_INTR_ENA);
50 
51 	if (rx)
52 		value &= ~DMA_INTR_DEFAULT_RX;
53 	if (tx)
54 		value &= ~DMA_INTR_DEFAULT_TX;
55 
56 	writel(value, ioaddr + DMA_INTR_ENA);
57 }
58 
59 void dwmac_dma_start_tx(void __iomem *ioaddr, u32 chan)
60 {
61 	u32 value = readl(ioaddr + DMA_CONTROL);
62 	value |= DMA_CONTROL_ST;
63 	writel(value, ioaddr + DMA_CONTROL);
64 }
65 
66 void dwmac_dma_stop_tx(void __iomem *ioaddr, u32 chan)
67 {
68 	u32 value = readl(ioaddr + DMA_CONTROL);
69 	value &= ~DMA_CONTROL_ST;
70 	writel(value, ioaddr + DMA_CONTROL);
71 }
72 
73 void dwmac_dma_start_rx(void __iomem *ioaddr, u32 chan)
74 {
75 	u32 value = readl(ioaddr + DMA_CONTROL);
76 	value |= DMA_CONTROL_SR;
77 	writel(value, ioaddr + DMA_CONTROL);
78 }
79 
80 void dwmac_dma_stop_rx(void __iomem *ioaddr, u32 chan)
81 {
82 	u32 value = readl(ioaddr + DMA_CONTROL);
83 	value &= ~DMA_CONTROL_SR;
84 	writel(value, ioaddr + DMA_CONTROL);
85 }
86 
87 #ifdef DWMAC_DMA_DEBUG
88 static void show_tx_process_state(unsigned int status)
89 {
90 	unsigned int state;
91 	state = (status & DMA_STATUS_TS_MASK) >> DMA_STATUS_TS_SHIFT;
92 
93 	switch (state) {
94 	case 0:
95 		pr_debug("- TX (Stopped): Reset or Stop command\n");
96 		break;
97 	case 1:
98 		pr_debug("- TX (Running): Fetching the Tx desc\n");
99 		break;
100 	case 2:
101 		pr_debug("- TX (Running): Waiting for end of tx\n");
102 		break;
103 	case 3:
104 		pr_debug("- TX (Running): Reading the data "
105 		       "and queuing the data into the Tx buf\n");
106 		break;
107 	case 6:
108 		pr_debug("- TX (Suspended): Tx Buff Underflow "
109 		       "or an unavailable Transmit descriptor\n");
110 		break;
111 	case 7:
112 		pr_debug("- TX (Running): Closing Tx descriptor\n");
113 		break;
114 	default:
115 		break;
116 	}
117 }
118 
119 static void show_rx_process_state(unsigned int status)
120 {
121 	unsigned int state;
122 	state = (status & DMA_STATUS_RS_MASK) >> DMA_STATUS_RS_SHIFT;
123 
124 	switch (state) {
125 	case 0:
126 		pr_debug("- RX (Stopped): Reset or Stop command\n");
127 		break;
128 	case 1:
129 		pr_debug("- RX (Running): Fetching the Rx desc\n");
130 		break;
131 	case 2:
132 		pr_debug("- RX (Running): Checking for end of pkt\n");
133 		break;
134 	case 3:
135 		pr_debug("- RX (Running): Waiting for Rx pkt\n");
136 		break;
137 	case 4:
138 		pr_debug("- RX (Suspended): Unavailable Rx buf\n");
139 		break;
140 	case 5:
141 		pr_debug("- RX (Running): Closing Rx descriptor\n");
142 		break;
143 	case 6:
144 		pr_debug("- RX(Running): Flushing the current frame"
145 		       " from the Rx buf\n");
146 		break;
147 	case 7:
148 		pr_debug("- RX (Running): Queuing the Rx frame"
149 		       " from the Rx buf into memory\n");
150 		break;
151 	default:
152 		break;
153 	}
154 }
155 #endif
156 
157 int dwmac_dma_interrupt(void __iomem *ioaddr,
158 			struct stmmac_extra_stats *x, u32 chan, u32 dir)
159 {
160 	int ret = 0;
161 	/* read the status register (CSR5) */
162 	u32 intr_status = readl(ioaddr + DMA_STATUS);
163 
164 #ifdef DWMAC_DMA_DEBUG
165 	/* Enable it to monitor DMA rx/tx status in case of critical problems */
166 	pr_debug("%s: [CSR5: 0x%08x]\n", __func__, intr_status);
167 	show_tx_process_state(intr_status);
168 	show_rx_process_state(intr_status);
169 #endif
170 
171 	if (dir == DMA_DIR_RX)
172 		intr_status &= DMA_STATUS_MSK_RX;
173 	else if (dir == DMA_DIR_TX)
174 		intr_status &= DMA_STATUS_MSK_TX;
175 
176 	/* ABNORMAL interrupts */
177 	if (unlikely(intr_status & DMA_STATUS_AIS)) {
178 		if (unlikely(intr_status & DMA_STATUS_UNF)) {
179 			ret = tx_hard_error_bump_tc;
180 			x->tx_undeflow_irq++;
181 		}
182 		if (unlikely(intr_status & DMA_STATUS_TJT))
183 			x->tx_jabber_irq++;
184 
185 		if (unlikely(intr_status & DMA_STATUS_OVF))
186 			x->rx_overflow_irq++;
187 
188 		if (unlikely(intr_status & DMA_STATUS_RU))
189 			x->rx_buf_unav_irq++;
190 		if (unlikely(intr_status & DMA_STATUS_RPS))
191 			x->rx_process_stopped_irq++;
192 		if (unlikely(intr_status & DMA_STATUS_RWT))
193 			x->rx_watchdog_irq++;
194 		if (unlikely(intr_status & DMA_STATUS_ETI))
195 			x->tx_early_irq++;
196 		if (unlikely(intr_status & DMA_STATUS_TPS)) {
197 			x->tx_process_stopped_irq++;
198 			ret = tx_hard_error;
199 		}
200 		if (unlikely(intr_status & DMA_STATUS_FBI)) {
201 			x->fatal_bus_error_irq++;
202 			ret = tx_hard_error;
203 		}
204 	}
205 	/* TX/RX NORMAL interrupts */
206 	if (likely(intr_status & DMA_STATUS_NIS)) {
207 		x->normal_irq_n++;
208 		if (likely(intr_status & DMA_STATUS_RI)) {
209 			u32 value = readl(ioaddr + DMA_INTR_ENA);
210 			/* to schedule NAPI on real RIE event. */
211 			if (likely(value & DMA_INTR_ENA_RIE)) {
212 				x->rx_normal_irq_n++;
213 				ret |= handle_rx;
214 			}
215 		}
216 		if (likely(intr_status & DMA_STATUS_TI)) {
217 			x->tx_normal_irq_n++;
218 			ret |= handle_tx;
219 		}
220 		if (unlikely(intr_status & DMA_STATUS_ERI))
221 			x->rx_early_irq++;
222 	}
223 	/* Optional hardware blocks, interrupts should be disabled */
224 	if (unlikely(intr_status &
225 		     (DMA_STATUS_GPI | DMA_STATUS_GMI | DMA_STATUS_GLI)))
226 		pr_warn("%s: unexpected status %08x\n", __func__, intr_status);
227 
228 	/* Clear the interrupt by writing a logic 1 to the CSR5[15-0] */
229 	writel((intr_status & 0x1ffff), ioaddr + DMA_STATUS);
230 
231 	return ret;
232 }
233 
234 void dwmac_dma_flush_tx_fifo(void __iomem *ioaddr)
235 {
236 	u32 csr6 = readl(ioaddr + DMA_CONTROL);
237 	writel((csr6 | DMA_CONTROL_FTF), ioaddr + DMA_CONTROL);
238 
239 	do {} while ((readl(ioaddr + DMA_CONTROL) & DMA_CONTROL_FTF));
240 }
241 
242 void stmmac_set_mac_addr(void __iomem *ioaddr, const u8 addr[6],
243 			 unsigned int high, unsigned int low)
244 {
245 	unsigned long data;
246 
247 	data = (addr[5] << 8) | addr[4];
248 	/* For MAC Addr registers we have to set the Address Enable (AE)
249 	 * bit that has no effect on the High Reg 0 where the bit 31 (MO)
250 	 * is RO.
251 	 */
252 	writel(data | GMAC_HI_REG_AE, ioaddr + high);
253 	data = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0];
254 	writel(data, ioaddr + low);
255 }
256 EXPORT_SYMBOL_GPL(stmmac_set_mac_addr);
257 
258 /* Enable disable MAC RX/TX */
259 void stmmac_set_mac(void __iomem *ioaddr, bool enable)
260 {
261 	u32 value = readl(ioaddr + MAC_CTRL_REG);
262 
263 	if (enable)
264 		value |= MAC_ENABLE_RX | MAC_ENABLE_TX;
265 	else
266 		value &= ~(MAC_ENABLE_TX | MAC_ENABLE_RX);
267 
268 	writel(value, ioaddr + MAC_CTRL_REG);
269 }
270 
271 void stmmac_get_mac_addr(void __iomem *ioaddr, unsigned char *addr,
272 			 unsigned int high, unsigned int low)
273 {
274 	unsigned int hi_addr, lo_addr;
275 
276 	/* Read the MAC address from the hardware */
277 	hi_addr = readl(ioaddr + high);
278 	lo_addr = readl(ioaddr + low);
279 
280 	/* Extract the MAC address from the high and low words */
281 	addr[0] = lo_addr & 0xff;
282 	addr[1] = (lo_addr >> 8) & 0xff;
283 	addr[2] = (lo_addr >> 16) & 0xff;
284 	addr[3] = (lo_addr >> 24) & 0xff;
285 	addr[4] = hi_addr & 0xff;
286 	addr[5] = (hi_addr >> 8) & 0xff;
287 }
288 EXPORT_SYMBOL_GPL(stmmac_get_mac_addr);
289