1 // SPDX-License-Identifier: GPL-2.0-only 2 /******************************************************************************* 3 Copyright (C) 2007-2009 STMicroelectronics Ltd 4 5 6 Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> 7 *******************************************************************************/ 8 9 #include <linux/io.h> 10 #include <linux/iopoll.h> 11 #include "common.h" 12 #include "dwmac_dma.h" 13 14 #define GMAC_HI_REG_AE 0x80000000 15 16 int dwmac_dma_reset(void __iomem *ioaddr) 17 { 18 u32 value = readl(ioaddr + DMA_BUS_MODE); 19 20 /* DMA SW reset */ 21 value |= DMA_BUS_MODE_SFT_RESET; 22 writel(value, ioaddr + DMA_BUS_MODE); 23 24 return readl_poll_timeout(ioaddr + DMA_BUS_MODE, value, 25 !(value & DMA_BUS_MODE_SFT_RESET), 26 10000, 200000); 27 } 28 29 /* CSR1 enables the transmit DMA to check for new descriptor */ 30 void dwmac_enable_dma_transmission(void __iomem *ioaddr) 31 { 32 writel(1, ioaddr + DMA_XMT_POLL_DEMAND); 33 } 34 35 void dwmac_enable_dma_irq(void __iomem *ioaddr, u32 chan, bool rx, bool tx) 36 { 37 u32 value = readl(ioaddr + DMA_INTR_ENA); 38 39 if (rx) 40 value |= DMA_INTR_DEFAULT_RX; 41 if (tx) 42 value |= DMA_INTR_DEFAULT_TX; 43 44 writel(value, ioaddr + DMA_INTR_ENA); 45 } 46 47 void dwmac_disable_dma_irq(void __iomem *ioaddr, u32 chan, bool rx, bool tx) 48 { 49 u32 value = readl(ioaddr + DMA_INTR_ENA); 50 51 if (rx) 52 value &= ~DMA_INTR_DEFAULT_RX; 53 if (tx) 54 value &= ~DMA_INTR_DEFAULT_TX; 55 56 writel(value, ioaddr + DMA_INTR_ENA); 57 } 58 59 void dwmac_dma_start_tx(void __iomem *ioaddr, u32 chan) 60 { 61 u32 value = readl(ioaddr + DMA_CONTROL); 62 value |= DMA_CONTROL_ST; 63 writel(value, ioaddr + DMA_CONTROL); 64 } 65 66 void dwmac_dma_stop_tx(void __iomem *ioaddr, u32 chan) 67 { 68 u32 value = readl(ioaddr + DMA_CONTROL); 69 value &= ~DMA_CONTROL_ST; 70 writel(value, ioaddr + DMA_CONTROL); 71 } 72 73 void dwmac_dma_start_rx(void __iomem *ioaddr, u32 chan) 74 { 75 u32 value = readl(ioaddr + DMA_CONTROL); 76 value |= DMA_CONTROL_SR; 77 writel(value, ioaddr + DMA_CONTROL); 78 } 79 80 void dwmac_dma_stop_rx(void __iomem *ioaddr, u32 chan) 81 { 82 u32 value = readl(ioaddr + DMA_CONTROL); 83 value &= ~DMA_CONTROL_SR; 84 writel(value, ioaddr + DMA_CONTROL); 85 } 86 87 #ifdef DWMAC_DMA_DEBUG 88 static void show_tx_process_state(unsigned int status) 89 { 90 unsigned int state; 91 state = (status & DMA_STATUS_TS_MASK) >> DMA_STATUS_TS_SHIFT; 92 93 switch (state) { 94 case 0: 95 pr_debug("- TX (Stopped): Reset or Stop command\n"); 96 break; 97 case 1: 98 pr_debug("- TX (Running): Fetching the Tx desc\n"); 99 break; 100 case 2: 101 pr_debug("- TX (Running): Waiting for end of tx\n"); 102 break; 103 case 3: 104 pr_debug("- TX (Running): Reading the data " 105 "and queuing the data into the Tx buf\n"); 106 break; 107 case 6: 108 pr_debug("- TX (Suspended): Tx Buff Underflow " 109 "or an unavailable Transmit descriptor\n"); 110 break; 111 case 7: 112 pr_debug("- TX (Running): Closing Tx descriptor\n"); 113 break; 114 default: 115 break; 116 } 117 } 118 119 static void show_rx_process_state(unsigned int status) 120 { 121 unsigned int state; 122 state = (status & DMA_STATUS_RS_MASK) >> DMA_STATUS_RS_SHIFT; 123 124 switch (state) { 125 case 0: 126 pr_debug("- RX (Stopped): Reset or Stop command\n"); 127 break; 128 case 1: 129 pr_debug("- RX (Running): Fetching the Rx desc\n"); 130 break; 131 case 2: 132 pr_debug("- RX (Running): Checking for end of pkt\n"); 133 break; 134 case 3: 135 pr_debug("- RX (Running): Waiting for Rx pkt\n"); 136 break; 137 case 4: 138 pr_debug("- RX (Suspended): Unavailable Rx buf\n"); 139 break; 140 case 5: 141 pr_debug("- RX (Running): Closing Rx descriptor\n"); 142 break; 143 case 6: 144 pr_debug("- RX(Running): Flushing the current frame" 145 " from the Rx buf\n"); 146 break; 147 case 7: 148 pr_debug("- RX (Running): Queuing the Rx frame" 149 " from the Rx buf into memory\n"); 150 break; 151 default: 152 break; 153 } 154 } 155 #endif 156 157 int dwmac_dma_interrupt(void __iomem *ioaddr, 158 struct stmmac_extra_stats *x, u32 chan, u32 dir) 159 { 160 int ret = 0; 161 /* read the status register (CSR5) */ 162 u32 intr_status = readl(ioaddr + DMA_STATUS); 163 164 #ifdef DWMAC_DMA_DEBUG 165 /* Enable it to monitor DMA rx/tx status in case of critical problems */ 166 pr_debug("%s: [CSR5: 0x%08x]\n", __func__, intr_status); 167 show_tx_process_state(intr_status); 168 show_rx_process_state(intr_status); 169 #endif 170 171 if (dir == DMA_DIR_RX) 172 intr_status &= DMA_STATUS_MSK_RX; 173 else if (dir == DMA_DIR_TX) 174 intr_status &= DMA_STATUS_MSK_TX; 175 176 /* ABNORMAL interrupts */ 177 if (unlikely(intr_status & DMA_STATUS_AIS)) { 178 if (unlikely(intr_status & DMA_STATUS_UNF)) { 179 ret = tx_hard_error_bump_tc; 180 x->tx_undeflow_irq++; 181 } 182 if (unlikely(intr_status & DMA_STATUS_TJT)) 183 x->tx_jabber_irq++; 184 185 if (unlikely(intr_status & DMA_STATUS_OVF)) 186 x->rx_overflow_irq++; 187 188 if (unlikely(intr_status & DMA_STATUS_RU)) 189 x->rx_buf_unav_irq++; 190 if (unlikely(intr_status & DMA_STATUS_RPS)) 191 x->rx_process_stopped_irq++; 192 if (unlikely(intr_status & DMA_STATUS_RWT)) 193 x->rx_watchdog_irq++; 194 if (unlikely(intr_status & DMA_STATUS_ETI)) 195 x->tx_early_irq++; 196 if (unlikely(intr_status & DMA_STATUS_TPS)) { 197 x->tx_process_stopped_irq++; 198 ret = tx_hard_error; 199 } 200 if (unlikely(intr_status & DMA_STATUS_FBI)) { 201 x->fatal_bus_error_irq++; 202 ret = tx_hard_error; 203 } 204 } 205 /* TX/RX NORMAL interrupts */ 206 if (likely(intr_status & DMA_STATUS_NIS)) { 207 x->normal_irq_n++; 208 if (likely(intr_status & DMA_STATUS_RI)) { 209 u32 value = readl(ioaddr + DMA_INTR_ENA); 210 /* to schedule NAPI on real RIE event. */ 211 if (likely(value & DMA_INTR_ENA_RIE)) { 212 x->rx_normal_irq_n++; 213 ret |= handle_rx; 214 } 215 } 216 if (likely(intr_status & DMA_STATUS_TI)) { 217 x->tx_normal_irq_n++; 218 ret |= handle_tx; 219 } 220 if (unlikely(intr_status & DMA_STATUS_ERI)) 221 x->rx_early_irq++; 222 } 223 /* Optional hardware blocks, interrupts should be disabled */ 224 if (unlikely(intr_status & 225 (DMA_STATUS_GPI | DMA_STATUS_GMI | DMA_STATUS_GLI))) 226 pr_warn("%s: unexpected status %08x\n", __func__, intr_status); 227 228 /* Clear the interrupt by writing a logic 1 to the CSR5[15-0] */ 229 writel((intr_status & 0x1ffff), ioaddr + DMA_STATUS); 230 231 return ret; 232 } 233 234 void dwmac_dma_flush_tx_fifo(void __iomem *ioaddr) 235 { 236 u32 csr6 = readl(ioaddr + DMA_CONTROL); 237 writel((csr6 | DMA_CONTROL_FTF), ioaddr + DMA_CONTROL); 238 239 do {} while ((readl(ioaddr + DMA_CONTROL) & DMA_CONTROL_FTF)); 240 } 241 242 void stmmac_set_mac_addr(void __iomem *ioaddr, u8 addr[6], 243 unsigned int high, unsigned int low) 244 { 245 unsigned long data; 246 247 data = (addr[5] << 8) | addr[4]; 248 /* For MAC Addr registers we have to set the Address Enable (AE) 249 * bit that has no effect on the High Reg 0 where the bit 31 (MO) 250 * is RO. 251 */ 252 writel(data | GMAC_HI_REG_AE, ioaddr + high); 253 data = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0]; 254 writel(data, ioaddr + low); 255 } 256 EXPORT_SYMBOL_GPL(stmmac_set_mac_addr); 257 258 /* Enable disable MAC RX/TX */ 259 void stmmac_set_mac(void __iomem *ioaddr, bool enable) 260 { 261 u32 value = readl(ioaddr + MAC_CTRL_REG); 262 263 if (enable) 264 value |= MAC_ENABLE_RX | MAC_ENABLE_TX; 265 else 266 value &= ~(MAC_ENABLE_TX | MAC_ENABLE_RX); 267 268 writel(value, ioaddr + MAC_CTRL_REG); 269 } 270 271 void stmmac_get_mac_addr(void __iomem *ioaddr, unsigned char *addr, 272 unsigned int high, unsigned int low) 273 { 274 unsigned int hi_addr, lo_addr; 275 276 /* Read the MAC address from the hardware */ 277 hi_addr = readl(ioaddr + high); 278 lo_addr = readl(ioaddr + low); 279 280 /* Extract the MAC address from the high and low words */ 281 addr[0] = lo_addr & 0xff; 282 addr[1] = (lo_addr >> 8) & 0xff; 283 addr[2] = (lo_addr >> 16) & 0xff; 284 addr[3] = (lo_addr >> 24) & 0xff; 285 addr[4] = hi_addr & 0xff; 286 addr[5] = (hi_addr >> 8) & 0xff; 287 } 288 EXPORT_SYMBOL_GPL(stmmac_get_mac_addr); 289