1 /* 2 * dwmac-sun8i.c - Allwinner sun8i DWMAC specific glue layer 3 * 4 * Copyright (C) 2017 Corentin Labbe <clabbe.montjoie@gmail.com> 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation; either version 2 of the License, or 9 * (at your option) any later version. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 * GNU General Public License for more details. 15 */ 16 17 #include <linux/clk.h> 18 #include <linux/io.h> 19 #include <linux/iopoll.h> 20 #include <linux/mdio-mux.h> 21 #include <linux/mfd/syscon.h> 22 #include <linux/module.h> 23 #include <linux/of_device.h> 24 #include <linux/of_mdio.h> 25 #include <linux/of_net.h> 26 #include <linux/phy.h> 27 #include <linux/platform_device.h> 28 #include <linux/regulator/consumer.h> 29 #include <linux/regmap.h> 30 #include <linux/stmmac.h> 31 32 #include "stmmac.h" 33 #include "stmmac_platform.h" 34 35 /* General notes on dwmac-sun8i: 36 * Locking: no locking is necessary in this file because all necessary locking 37 * is done in the "stmmac files" 38 */ 39 40 /* struct emac_variant - Descrive dwmac-sun8i hardware variant 41 * @default_syscon_value: The default value of the EMAC register in syscon 42 * This value is used for disabling properly EMAC 43 * and used as a good starting value in case of the 44 * boot process(uboot) leave some stuff. 45 * @soc_has_internal_phy: Does the MAC embed an internal PHY 46 * @support_mii: Does the MAC handle MII 47 * @support_rmii: Does the MAC handle RMII 48 * @support_rgmii: Does the MAC handle RGMII 49 */ 50 struct emac_variant { 51 u32 default_syscon_value; 52 bool soc_has_internal_phy; 53 bool support_mii; 54 bool support_rmii; 55 bool support_rgmii; 56 }; 57 58 /* struct sunxi_priv_data - hold all sunxi private data 59 * @tx_clk: reference to MAC TX clock 60 * @ephy_clk: reference to the optional EPHY clock for the internal PHY 61 * @regulator: reference to the optional regulator 62 * @rst_ephy: reference to the optional EPHY reset for the internal PHY 63 * @variant: reference to the current board variant 64 * @regmap: regmap for using the syscon 65 * @internal_phy_powered: Does the internal PHY is enabled 66 * @mux_handle: Internal pointer used by mdio-mux lib 67 */ 68 struct sunxi_priv_data { 69 struct clk *tx_clk; 70 struct clk *ephy_clk; 71 struct regulator *regulator; 72 struct reset_control *rst_ephy; 73 const struct emac_variant *variant; 74 struct regmap *regmap; 75 bool internal_phy_powered; 76 void *mux_handle; 77 }; 78 79 static const struct emac_variant emac_variant_h3 = { 80 .default_syscon_value = 0x58000, 81 .soc_has_internal_phy = true, 82 .support_mii = true, 83 .support_rmii = true, 84 .support_rgmii = true 85 }; 86 87 static const struct emac_variant emac_variant_v3s = { 88 .default_syscon_value = 0x38000, 89 .soc_has_internal_phy = true, 90 .support_mii = true 91 }; 92 93 static const struct emac_variant emac_variant_a83t = { 94 .default_syscon_value = 0, 95 .soc_has_internal_phy = false, 96 .support_mii = true, 97 .support_rgmii = true 98 }; 99 100 static const struct emac_variant emac_variant_a64 = { 101 .default_syscon_value = 0, 102 .soc_has_internal_phy = false, 103 .support_mii = true, 104 .support_rmii = true, 105 .support_rgmii = true 106 }; 107 108 #define EMAC_BASIC_CTL0 0x00 109 #define EMAC_BASIC_CTL1 0x04 110 #define EMAC_INT_STA 0x08 111 #define EMAC_INT_EN 0x0C 112 #define EMAC_TX_CTL0 0x10 113 #define EMAC_TX_CTL1 0x14 114 #define EMAC_TX_FLOW_CTL 0x1C 115 #define EMAC_TX_DESC_LIST 0x20 116 #define EMAC_RX_CTL0 0x24 117 #define EMAC_RX_CTL1 0x28 118 #define EMAC_RX_DESC_LIST 0x34 119 #define EMAC_RX_FRM_FLT 0x38 120 #define EMAC_MDIO_CMD 0x48 121 #define EMAC_MDIO_DATA 0x4C 122 #define EMAC_MACADDR_HI(reg) (0x50 + (reg) * 8) 123 #define EMAC_MACADDR_LO(reg) (0x54 + (reg) * 8) 124 #define EMAC_TX_DMA_STA 0xB0 125 #define EMAC_TX_CUR_DESC 0xB4 126 #define EMAC_TX_CUR_BUF 0xB8 127 #define EMAC_RX_DMA_STA 0xC0 128 #define EMAC_RX_CUR_DESC 0xC4 129 #define EMAC_RX_CUR_BUF 0xC8 130 131 /* Use in EMAC_BASIC_CTL0 */ 132 #define EMAC_DUPLEX_FULL BIT(0) 133 #define EMAC_LOOPBACK BIT(1) 134 #define EMAC_SPEED_1000 0 135 #define EMAC_SPEED_100 (0x03 << 2) 136 #define EMAC_SPEED_10 (0x02 << 2) 137 138 /* Use in EMAC_BASIC_CTL1 */ 139 #define EMAC_BURSTLEN_SHIFT 24 140 141 /* Used in EMAC_RX_FRM_FLT */ 142 #define EMAC_FRM_FLT_RXALL BIT(0) 143 #define EMAC_FRM_FLT_CTL BIT(13) 144 #define EMAC_FRM_FLT_MULTICAST BIT(16) 145 146 /* Used in RX_CTL1*/ 147 #define EMAC_RX_MD BIT(1) 148 #define EMAC_RX_TH_MASK GENMASK(4, 5) 149 #define EMAC_RX_TH_32 0 150 #define EMAC_RX_TH_64 (0x1 << 4) 151 #define EMAC_RX_TH_96 (0x2 << 4) 152 #define EMAC_RX_TH_128 (0x3 << 4) 153 #define EMAC_RX_DMA_EN BIT(30) 154 #define EMAC_RX_DMA_START BIT(31) 155 156 /* Used in TX_CTL1*/ 157 #define EMAC_TX_MD BIT(1) 158 #define EMAC_TX_NEXT_FRM BIT(2) 159 #define EMAC_TX_TH_MASK GENMASK(8, 10) 160 #define EMAC_TX_TH_64 0 161 #define EMAC_TX_TH_128 (0x1 << 8) 162 #define EMAC_TX_TH_192 (0x2 << 8) 163 #define EMAC_TX_TH_256 (0x3 << 8) 164 #define EMAC_TX_DMA_EN BIT(30) 165 #define EMAC_TX_DMA_START BIT(31) 166 167 /* Used in RX_CTL0 */ 168 #define EMAC_RX_RECEIVER_EN BIT(31) 169 #define EMAC_RX_DO_CRC BIT(27) 170 #define EMAC_RX_FLOW_CTL_EN BIT(16) 171 172 /* Used in TX_CTL0 */ 173 #define EMAC_TX_TRANSMITTER_EN BIT(31) 174 175 /* Used in EMAC_TX_FLOW_CTL */ 176 #define EMAC_TX_FLOW_CTL_EN BIT(0) 177 178 /* Used in EMAC_INT_STA */ 179 #define EMAC_TX_INT BIT(0) 180 #define EMAC_TX_DMA_STOP_INT BIT(1) 181 #define EMAC_TX_BUF_UA_INT BIT(2) 182 #define EMAC_TX_TIMEOUT_INT BIT(3) 183 #define EMAC_TX_UNDERFLOW_INT BIT(4) 184 #define EMAC_TX_EARLY_INT BIT(5) 185 #define EMAC_RX_INT BIT(8) 186 #define EMAC_RX_BUF_UA_INT BIT(9) 187 #define EMAC_RX_DMA_STOP_INT BIT(10) 188 #define EMAC_RX_TIMEOUT_INT BIT(11) 189 #define EMAC_RX_OVERFLOW_INT BIT(12) 190 #define EMAC_RX_EARLY_INT BIT(13) 191 #define EMAC_RGMII_STA_INT BIT(16) 192 193 #define MAC_ADDR_TYPE_DST BIT(31) 194 195 /* H3 specific bits for EPHY */ 196 #define H3_EPHY_ADDR_SHIFT 20 197 #define H3_EPHY_CLK_SEL BIT(18) /* 1: 24MHz, 0: 25MHz */ 198 #define H3_EPHY_LED_POL BIT(17) /* 1: active low, 0: active high */ 199 #define H3_EPHY_SHUTDOWN BIT(16) /* 1: shutdown, 0: power up */ 200 #define H3_EPHY_SELECT BIT(15) /* 1: internal PHY, 0: external PHY */ 201 #define H3_EPHY_MUX_MASK (H3_EPHY_SHUTDOWN | H3_EPHY_SELECT) 202 #define DWMAC_SUN8I_MDIO_MUX_INTERNAL_ID 1 203 #define DWMAC_SUN8I_MDIO_MUX_EXTERNAL_ID 2 204 205 /* H3/A64 specific bits */ 206 #define SYSCON_RMII_EN BIT(13) /* 1: enable RMII (overrides EPIT) */ 207 208 /* Generic system control EMAC_CLK bits */ 209 #define SYSCON_ETXDC_MASK GENMASK(2, 0) 210 #define SYSCON_ETXDC_SHIFT 10 211 #define SYSCON_ERXDC_MASK GENMASK(4, 0) 212 #define SYSCON_ERXDC_SHIFT 5 213 /* EMAC PHY Interface Type */ 214 #define SYSCON_EPIT BIT(2) /* 1: RGMII, 0: MII */ 215 #define SYSCON_ETCS_MASK GENMASK(1, 0) 216 #define SYSCON_ETCS_MII 0x0 217 #define SYSCON_ETCS_EXT_GMII 0x1 218 #define SYSCON_ETCS_INT_GMII 0x2 219 #define SYSCON_EMAC_REG 0x30 220 221 /* sun8i_dwmac_dma_reset() - reset the EMAC 222 * Called from stmmac via stmmac_dma_ops->reset 223 */ 224 static int sun8i_dwmac_dma_reset(void __iomem *ioaddr) 225 { 226 writel(0, ioaddr + EMAC_RX_CTL1); 227 writel(0, ioaddr + EMAC_TX_CTL1); 228 writel(0, ioaddr + EMAC_RX_FRM_FLT); 229 writel(0, ioaddr + EMAC_RX_DESC_LIST); 230 writel(0, ioaddr + EMAC_TX_DESC_LIST); 231 writel(0, ioaddr + EMAC_INT_EN); 232 writel(0x1FFFFFF, ioaddr + EMAC_INT_STA); 233 return 0; 234 } 235 236 /* sun8i_dwmac_dma_init() - initialize the EMAC 237 * Called from stmmac via stmmac_dma_ops->init 238 */ 239 static void sun8i_dwmac_dma_init(void __iomem *ioaddr, 240 struct stmmac_dma_cfg *dma_cfg, 241 u32 dma_tx, u32 dma_rx, int atds) 242 { 243 /* Write TX and RX descriptors address */ 244 writel(dma_rx, ioaddr + EMAC_RX_DESC_LIST); 245 writel(dma_tx, ioaddr + EMAC_TX_DESC_LIST); 246 247 writel(EMAC_RX_INT | EMAC_TX_INT, ioaddr + EMAC_INT_EN); 248 writel(0x1FFFFFF, ioaddr + EMAC_INT_STA); 249 } 250 251 /* sun8i_dwmac_dump_regs() - Dump EMAC address space 252 * Called from stmmac_dma_ops->dump_regs 253 * Used for ethtool 254 */ 255 static void sun8i_dwmac_dump_regs(void __iomem *ioaddr, u32 *reg_space) 256 { 257 int i; 258 259 for (i = 0; i < 0xC8; i += 4) { 260 if (i == 0x32 || i == 0x3C) 261 continue; 262 reg_space[i / 4] = readl(ioaddr + i); 263 } 264 } 265 266 /* sun8i_dwmac_dump_mac_regs() - Dump EMAC address space 267 * Called from stmmac_ops->dump_regs 268 * Used for ethtool 269 */ 270 static void sun8i_dwmac_dump_mac_regs(struct mac_device_info *hw, 271 u32 *reg_space) 272 { 273 int i; 274 void __iomem *ioaddr = hw->pcsr; 275 276 for (i = 0; i < 0xC8; i += 4) { 277 if (i == 0x32 || i == 0x3C) 278 continue; 279 reg_space[i / 4] = readl(ioaddr + i); 280 } 281 } 282 283 static void sun8i_dwmac_enable_dma_irq(void __iomem *ioaddr, u32 chan) 284 { 285 writel(EMAC_RX_INT | EMAC_TX_INT, ioaddr + EMAC_INT_EN); 286 } 287 288 static void sun8i_dwmac_disable_dma_irq(void __iomem *ioaddr, u32 chan) 289 { 290 writel(0, ioaddr + EMAC_INT_EN); 291 } 292 293 static void sun8i_dwmac_dma_start_tx(void __iomem *ioaddr, u32 chan) 294 { 295 u32 v; 296 297 v = readl(ioaddr + EMAC_TX_CTL1); 298 v |= EMAC_TX_DMA_START; 299 v |= EMAC_TX_DMA_EN; 300 writel(v, ioaddr + EMAC_TX_CTL1); 301 } 302 303 static void sun8i_dwmac_enable_dma_transmission(void __iomem *ioaddr) 304 { 305 u32 v; 306 307 v = readl(ioaddr + EMAC_TX_CTL1); 308 v |= EMAC_TX_DMA_START; 309 v |= EMAC_TX_DMA_EN; 310 writel(v, ioaddr + EMAC_TX_CTL1); 311 } 312 313 static void sun8i_dwmac_dma_stop_tx(void __iomem *ioaddr, u32 chan) 314 { 315 u32 v; 316 317 v = readl(ioaddr + EMAC_TX_CTL1); 318 v &= ~EMAC_TX_DMA_EN; 319 writel(v, ioaddr + EMAC_TX_CTL1); 320 } 321 322 static void sun8i_dwmac_dma_start_rx(void __iomem *ioaddr, u32 chan) 323 { 324 u32 v; 325 326 v = readl(ioaddr + EMAC_RX_CTL1); 327 v |= EMAC_RX_DMA_START; 328 v |= EMAC_RX_DMA_EN; 329 writel(v, ioaddr + EMAC_RX_CTL1); 330 } 331 332 static void sun8i_dwmac_dma_stop_rx(void __iomem *ioaddr, u32 chan) 333 { 334 u32 v; 335 336 v = readl(ioaddr + EMAC_RX_CTL1); 337 v &= ~EMAC_RX_DMA_EN; 338 writel(v, ioaddr + EMAC_RX_CTL1); 339 } 340 341 static int sun8i_dwmac_dma_interrupt(void __iomem *ioaddr, 342 struct stmmac_extra_stats *x, u32 chan) 343 { 344 u32 v; 345 int ret = 0; 346 347 v = readl(ioaddr + EMAC_INT_STA); 348 349 if (v & EMAC_TX_INT) { 350 ret |= handle_tx; 351 x->tx_normal_irq_n++; 352 } 353 354 if (v & EMAC_TX_DMA_STOP_INT) 355 x->tx_process_stopped_irq++; 356 357 if (v & EMAC_TX_BUF_UA_INT) 358 x->tx_process_stopped_irq++; 359 360 if (v & EMAC_TX_TIMEOUT_INT) 361 ret |= tx_hard_error; 362 363 if (v & EMAC_TX_UNDERFLOW_INT) { 364 ret |= tx_hard_error; 365 x->tx_undeflow_irq++; 366 } 367 368 if (v & EMAC_TX_EARLY_INT) 369 x->tx_early_irq++; 370 371 if (v & EMAC_RX_INT) { 372 ret |= handle_rx; 373 x->rx_normal_irq_n++; 374 } 375 376 if (v & EMAC_RX_BUF_UA_INT) 377 x->rx_buf_unav_irq++; 378 379 if (v & EMAC_RX_DMA_STOP_INT) 380 x->rx_process_stopped_irq++; 381 382 if (v & EMAC_RX_TIMEOUT_INT) 383 ret |= tx_hard_error; 384 385 if (v & EMAC_RX_OVERFLOW_INT) { 386 ret |= tx_hard_error; 387 x->rx_overflow_irq++; 388 } 389 390 if (v & EMAC_RX_EARLY_INT) 391 x->rx_early_irq++; 392 393 if (v & EMAC_RGMII_STA_INT) 394 x->irq_rgmii_n++; 395 396 writel(v, ioaddr + EMAC_INT_STA); 397 398 return ret; 399 } 400 401 static void sun8i_dwmac_dma_operation_mode(void __iomem *ioaddr, int txmode, 402 int rxmode, int rxfifosz) 403 { 404 u32 v; 405 406 v = readl(ioaddr + EMAC_TX_CTL1); 407 if (txmode == SF_DMA_MODE) { 408 v |= EMAC_TX_MD; 409 /* Undocumented bit (called TX_NEXT_FRM in BSP), the original 410 * comment is 411 * "Operating on second frame increase the performance 412 * especially when transmit store-and-forward is used." 413 */ 414 v |= EMAC_TX_NEXT_FRM; 415 } else { 416 v &= ~EMAC_TX_MD; 417 v &= ~EMAC_TX_TH_MASK; 418 if (txmode < 64) 419 v |= EMAC_TX_TH_64; 420 else if (txmode < 128) 421 v |= EMAC_TX_TH_128; 422 else if (txmode < 192) 423 v |= EMAC_TX_TH_192; 424 else if (txmode < 256) 425 v |= EMAC_TX_TH_256; 426 } 427 writel(v, ioaddr + EMAC_TX_CTL1); 428 429 v = readl(ioaddr + EMAC_RX_CTL1); 430 if (rxmode == SF_DMA_MODE) { 431 v |= EMAC_RX_MD; 432 } else { 433 v &= ~EMAC_RX_MD; 434 v &= ~EMAC_RX_TH_MASK; 435 if (rxmode < 32) 436 v |= EMAC_RX_TH_32; 437 else if (rxmode < 64) 438 v |= EMAC_RX_TH_64; 439 else if (rxmode < 96) 440 v |= EMAC_RX_TH_96; 441 else if (rxmode < 128) 442 v |= EMAC_RX_TH_128; 443 } 444 writel(v, ioaddr + EMAC_RX_CTL1); 445 } 446 447 static const struct stmmac_dma_ops sun8i_dwmac_dma_ops = { 448 .reset = sun8i_dwmac_dma_reset, 449 .init = sun8i_dwmac_dma_init, 450 .dump_regs = sun8i_dwmac_dump_regs, 451 .dma_mode = sun8i_dwmac_dma_operation_mode, 452 .enable_dma_transmission = sun8i_dwmac_enable_dma_transmission, 453 .enable_dma_irq = sun8i_dwmac_enable_dma_irq, 454 .disable_dma_irq = sun8i_dwmac_disable_dma_irq, 455 .start_tx = sun8i_dwmac_dma_start_tx, 456 .stop_tx = sun8i_dwmac_dma_stop_tx, 457 .start_rx = sun8i_dwmac_dma_start_rx, 458 .stop_rx = sun8i_dwmac_dma_stop_rx, 459 .dma_interrupt = sun8i_dwmac_dma_interrupt, 460 }; 461 462 static int sun8i_dwmac_init(struct platform_device *pdev, void *priv) 463 { 464 struct sunxi_priv_data *gmac = priv; 465 int ret; 466 467 if (gmac->regulator) { 468 ret = regulator_enable(gmac->regulator); 469 if (ret) { 470 dev_err(&pdev->dev, "Fail to enable regulator\n"); 471 return ret; 472 } 473 } 474 475 ret = clk_prepare_enable(gmac->tx_clk); 476 if (ret) { 477 if (gmac->regulator) 478 regulator_disable(gmac->regulator); 479 dev_err(&pdev->dev, "Could not enable AHB clock\n"); 480 return ret; 481 } 482 483 return 0; 484 } 485 486 static void sun8i_dwmac_core_init(struct mac_device_info *hw, 487 struct net_device *dev) 488 { 489 void __iomem *ioaddr = hw->pcsr; 490 u32 v; 491 492 v = (8 << EMAC_BURSTLEN_SHIFT); /* burst len */ 493 writel(v, ioaddr + EMAC_BASIC_CTL1); 494 } 495 496 static void sun8i_dwmac_set_mac(void __iomem *ioaddr, bool enable) 497 { 498 u32 t, r; 499 500 t = readl(ioaddr + EMAC_TX_CTL0); 501 r = readl(ioaddr + EMAC_RX_CTL0); 502 if (enable) { 503 t |= EMAC_TX_TRANSMITTER_EN; 504 r |= EMAC_RX_RECEIVER_EN; 505 } else { 506 t &= ~EMAC_TX_TRANSMITTER_EN; 507 r &= ~EMAC_RX_RECEIVER_EN; 508 } 509 writel(t, ioaddr + EMAC_TX_CTL0); 510 writel(r, ioaddr + EMAC_RX_CTL0); 511 } 512 513 /* Set MAC address at slot reg_n 514 * All slot > 0 need to be enabled with MAC_ADDR_TYPE_DST 515 * If addr is NULL, clear the slot 516 */ 517 static void sun8i_dwmac_set_umac_addr(struct mac_device_info *hw, 518 unsigned char *addr, 519 unsigned int reg_n) 520 { 521 void __iomem *ioaddr = hw->pcsr; 522 u32 v; 523 524 if (!addr) { 525 writel(0, ioaddr + EMAC_MACADDR_HI(reg_n)); 526 return; 527 } 528 529 stmmac_set_mac_addr(ioaddr, addr, EMAC_MACADDR_HI(reg_n), 530 EMAC_MACADDR_LO(reg_n)); 531 if (reg_n > 0) { 532 v = readl(ioaddr + EMAC_MACADDR_HI(reg_n)); 533 v |= MAC_ADDR_TYPE_DST; 534 writel(v, ioaddr + EMAC_MACADDR_HI(reg_n)); 535 } 536 } 537 538 static void sun8i_dwmac_get_umac_addr(struct mac_device_info *hw, 539 unsigned char *addr, 540 unsigned int reg_n) 541 { 542 void __iomem *ioaddr = hw->pcsr; 543 544 stmmac_get_mac_addr(ioaddr, addr, EMAC_MACADDR_HI(reg_n), 545 EMAC_MACADDR_LO(reg_n)); 546 } 547 548 /* caution this function must return non 0 to work */ 549 static int sun8i_dwmac_rx_ipc_enable(struct mac_device_info *hw) 550 { 551 void __iomem *ioaddr = hw->pcsr; 552 u32 v; 553 554 v = readl(ioaddr + EMAC_RX_CTL0); 555 v |= EMAC_RX_DO_CRC; 556 writel(v, ioaddr + EMAC_RX_CTL0); 557 558 return 1; 559 } 560 561 static void sun8i_dwmac_set_filter(struct mac_device_info *hw, 562 struct net_device *dev) 563 { 564 void __iomem *ioaddr = hw->pcsr; 565 u32 v; 566 int i = 1; 567 struct netdev_hw_addr *ha; 568 int macaddrs = netdev_uc_count(dev) + netdev_mc_count(dev) + 1; 569 570 v = EMAC_FRM_FLT_CTL; 571 572 if (dev->flags & IFF_PROMISC) { 573 v = EMAC_FRM_FLT_RXALL; 574 } else if (dev->flags & IFF_ALLMULTI) { 575 v |= EMAC_FRM_FLT_MULTICAST; 576 } else if (macaddrs <= hw->unicast_filter_entries) { 577 if (!netdev_mc_empty(dev)) { 578 netdev_for_each_mc_addr(ha, dev) { 579 sun8i_dwmac_set_umac_addr(hw, ha->addr, i); 580 i++; 581 } 582 } 583 if (!netdev_uc_empty(dev)) { 584 netdev_for_each_uc_addr(ha, dev) { 585 sun8i_dwmac_set_umac_addr(hw, ha->addr, i); 586 i++; 587 } 588 } 589 } else { 590 netdev_info(dev, "Too many address, switching to promiscuous\n"); 591 v = EMAC_FRM_FLT_RXALL; 592 } 593 594 /* Disable unused address filter slots */ 595 while (i < hw->unicast_filter_entries) 596 sun8i_dwmac_set_umac_addr(hw, NULL, i++); 597 598 writel(v, ioaddr + EMAC_RX_FRM_FLT); 599 } 600 601 static void sun8i_dwmac_flow_ctrl(struct mac_device_info *hw, 602 unsigned int duplex, unsigned int fc, 603 unsigned int pause_time, u32 tx_cnt) 604 { 605 void __iomem *ioaddr = hw->pcsr; 606 u32 v; 607 608 v = readl(ioaddr + EMAC_RX_CTL0); 609 if (fc == FLOW_AUTO) 610 v |= EMAC_RX_FLOW_CTL_EN; 611 else 612 v &= ~EMAC_RX_FLOW_CTL_EN; 613 writel(v, ioaddr + EMAC_RX_CTL0); 614 615 v = readl(ioaddr + EMAC_TX_FLOW_CTL); 616 if (fc == FLOW_AUTO) 617 v |= EMAC_TX_FLOW_CTL_EN; 618 else 619 v &= ~EMAC_TX_FLOW_CTL_EN; 620 writel(v, ioaddr + EMAC_TX_FLOW_CTL); 621 } 622 623 static int sun8i_dwmac_reset(struct stmmac_priv *priv) 624 { 625 u32 v; 626 int err; 627 628 v = readl(priv->ioaddr + EMAC_BASIC_CTL1); 629 writel(v | 0x01, priv->ioaddr + EMAC_BASIC_CTL1); 630 631 /* The timeout was previoulsy set to 10ms, but some board (OrangePI0) 632 * need more if no cable plugged. 100ms seems OK 633 */ 634 err = readl_poll_timeout(priv->ioaddr + EMAC_BASIC_CTL1, v, 635 !(v & 0x01), 100, 100000); 636 637 if (err) { 638 dev_err(priv->device, "EMAC reset timeout\n"); 639 return -EFAULT; 640 } 641 return 0; 642 } 643 644 /* Search in mdio-mux node for internal PHY node and get its clk/reset */ 645 static int get_ephy_nodes(struct stmmac_priv *priv) 646 { 647 struct sunxi_priv_data *gmac = priv->plat->bsp_priv; 648 struct device_node *mdio_mux, *iphynode; 649 struct device_node *mdio_internal; 650 int ret; 651 652 mdio_mux = of_get_child_by_name(priv->device->of_node, "mdio-mux"); 653 if (!mdio_mux) { 654 dev_err(priv->device, "Cannot get mdio-mux node\n"); 655 return -ENODEV; 656 } 657 658 mdio_internal = of_find_compatible_node(mdio_mux, NULL, 659 "allwinner,sun8i-h3-mdio-internal"); 660 if (!mdio_internal) { 661 dev_err(priv->device, "Cannot get internal_mdio node\n"); 662 return -ENODEV; 663 } 664 665 /* Seek for internal PHY */ 666 for_each_child_of_node(mdio_internal, iphynode) { 667 gmac->ephy_clk = of_clk_get(iphynode, 0); 668 if (IS_ERR(gmac->ephy_clk)) 669 continue; 670 gmac->rst_ephy = of_reset_control_get_exclusive(iphynode, NULL); 671 if (IS_ERR(gmac->rst_ephy)) { 672 ret = PTR_ERR(gmac->rst_ephy); 673 if (ret == -EPROBE_DEFER) 674 return ret; 675 continue; 676 } 677 dev_info(priv->device, "Found internal PHY node\n"); 678 return 0; 679 } 680 return -ENODEV; 681 } 682 683 static int sun8i_dwmac_power_internal_phy(struct stmmac_priv *priv) 684 { 685 struct sunxi_priv_data *gmac = priv->plat->bsp_priv; 686 int ret; 687 688 if (gmac->internal_phy_powered) { 689 dev_warn(priv->device, "Internal PHY already powered\n"); 690 return 0; 691 } 692 693 dev_info(priv->device, "Powering internal PHY\n"); 694 ret = clk_prepare_enable(gmac->ephy_clk); 695 if (ret) { 696 dev_err(priv->device, "Cannot enable internal PHY\n"); 697 return ret; 698 } 699 700 /* Make sure the EPHY is properly reseted, as U-Boot may leave 701 * it at deasserted state, and thus it may fail to reset EMAC. 702 */ 703 reset_control_assert(gmac->rst_ephy); 704 705 ret = reset_control_deassert(gmac->rst_ephy); 706 if (ret) { 707 dev_err(priv->device, "Cannot deassert internal phy\n"); 708 clk_disable_unprepare(gmac->ephy_clk); 709 return ret; 710 } 711 712 gmac->internal_phy_powered = true; 713 714 return 0; 715 } 716 717 static int sun8i_dwmac_unpower_internal_phy(struct sunxi_priv_data *gmac) 718 { 719 if (!gmac->internal_phy_powered) 720 return 0; 721 722 clk_disable_unprepare(gmac->ephy_clk); 723 reset_control_assert(gmac->rst_ephy); 724 gmac->internal_phy_powered = false; 725 return 0; 726 } 727 728 /* MDIO multiplexing switch function 729 * This function is called by the mdio-mux layer when it thinks the mdio bus 730 * multiplexer needs to switch. 731 * 'current_child' is the current value of the mux register 732 * 'desired_child' is the value of the 'reg' property of the target child MDIO 733 * node. 734 * The first time this function is called, current_child == -1. 735 * If current_child == desired_child, then the mux is already set to the 736 * correct bus. 737 */ 738 static int mdio_mux_syscon_switch_fn(int current_child, int desired_child, 739 void *data) 740 { 741 struct stmmac_priv *priv = data; 742 struct sunxi_priv_data *gmac = priv->plat->bsp_priv; 743 u32 reg, val; 744 int ret = 0; 745 bool need_power_ephy = false; 746 747 if (current_child ^ desired_child) { 748 regmap_read(gmac->regmap, SYSCON_EMAC_REG, ®); 749 switch (desired_child) { 750 case DWMAC_SUN8I_MDIO_MUX_INTERNAL_ID: 751 dev_info(priv->device, "Switch mux to internal PHY"); 752 val = (reg & ~H3_EPHY_MUX_MASK) | H3_EPHY_SELECT; 753 754 need_power_ephy = true; 755 break; 756 case DWMAC_SUN8I_MDIO_MUX_EXTERNAL_ID: 757 dev_info(priv->device, "Switch mux to external PHY"); 758 val = (reg & ~H3_EPHY_MUX_MASK) | H3_EPHY_SHUTDOWN; 759 need_power_ephy = false; 760 break; 761 default: 762 dev_err(priv->device, "Invalid child ID %x\n", 763 desired_child); 764 return -EINVAL; 765 } 766 regmap_write(gmac->regmap, SYSCON_EMAC_REG, val); 767 if (need_power_ephy) { 768 ret = sun8i_dwmac_power_internal_phy(priv); 769 if (ret) 770 return ret; 771 } else { 772 sun8i_dwmac_unpower_internal_phy(gmac); 773 } 774 /* After changing syscon value, the MAC need reset or it will 775 * use the last value (and so the last PHY set). 776 */ 777 ret = sun8i_dwmac_reset(priv); 778 } 779 return ret; 780 } 781 782 static int sun8i_dwmac_register_mdio_mux(struct stmmac_priv *priv) 783 { 784 int ret; 785 struct device_node *mdio_mux; 786 struct sunxi_priv_data *gmac = priv->plat->bsp_priv; 787 788 mdio_mux = of_get_child_by_name(priv->device->of_node, "mdio-mux"); 789 if (!mdio_mux) 790 return -ENODEV; 791 792 ret = mdio_mux_init(priv->device, mdio_mux, mdio_mux_syscon_switch_fn, 793 &gmac->mux_handle, priv, priv->mii); 794 return ret; 795 } 796 797 static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv) 798 { 799 struct sunxi_priv_data *gmac = priv->plat->bsp_priv; 800 struct device_node *node = priv->device->of_node; 801 int ret; 802 u32 reg, val; 803 804 regmap_read(gmac->regmap, SYSCON_EMAC_REG, &val); 805 reg = gmac->variant->default_syscon_value; 806 if (reg != val) 807 dev_warn(priv->device, 808 "Current syscon value is not the default %x (expect %x)\n", 809 val, reg); 810 811 if (gmac->variant->soc_has_internal_phy) { 812 if (of_property_read_bool(node, "allwinner,leds-active-low")) 813 reg |= H3_EPHY_LED_POL; 814 else 815 reg &= ~H3_EPHY_LED_POL; 816 817 /* Force EPHY xtal frequency to 24MHz. */ 818 reg |= H3_EPHY_CLK_SEL; 819 820 ret = of_mdio_parse_addr(priv->device, priv->plat->phy_node); 821 if (ret < 0) { 822 dev_err(priv->device, "Could not parse MDIO addr\n"); 823 return ret; 824 } 825 /* of_mdio_parse_addr returns a valid (0 ~ 31) PHY 826 * address. No need to mask it again. 827 */ 828 reg |= 1 << H3_EPHY_ADDR_SHIFT; 829 } 830 831 if (!of_property_read_u32(node, "allwinner,tx-delay-ps", &val)) { 832 if (val % 100) { 833 dev_err(priv->device, "tx-delay must be a multiple of 100\n"); 834 return -EINVAL; 835 } 836 val /= 100; 837 dev_dbg(priv->device, "set tx-delay to %x\n", val); 838 if (val <= SYSCON_ETXDC_MASK) { 839 reg &= ~(SYSCON_ETXDC_MASK << SYSCON_ETXDC_SHIFT); 840 reg |= (val << SYSCON_ETXDC_SHIFT); 841 } else { 842 dev_err(priv->device, "Invalid TX clock delay: %d\n", 843 val); 844 return -EINVAL; 845 } 846 } 847 848 if (!of_property_read_u32(node, "allwinner,rx-delay-ps", &val)) { 849 if (val % 100) { 850 dev_err(priv->device, "rx-delay must be a multiple of 100\n"); 851 return -EINVAL; 852 } 853 val /= 100; 854 dev_dbg(priv->device, "set rx-delay to %x\n", val); 855 if (val <= SYSCON_ERXDC_MASK) { 856 reg &= ~(SYSCON_ERXDC_MASK << SYSCON_ERXDC_SHIFT); 857 reg |= (val << SYSCON_ERXDC_SHIFT); 858 } else { 859 dev_err(priv->device, "Invalid RX clock delay: %d\n", 860 val); 861 return -EINVAL; 862 } 863 } 864 865 /* Clear interface mode bits */ 866 reg &= ~(SYSCON_ETCS_MASK | SYSCON_EPIT); 867 if (gmac->variant->support_rmii) 868 reg &= ~SYSCON_RMII_EN; 869 870 switch (priv->plat->interface) { 871 case PHY_INTERFACE_MODE_MII: 872 /* default */ 873 break; 874 case PHY_INTERFACE_MODE_RGMII: 875 reg |= SYSCON_EPIT | SYSCON_ETCS_INT_GMII; 876 break; 877 case PHY_INTERFACE_MODE_RMII: 878 reg |= SYSCON_RMII_EN | SYSCON_ETCS_EXT_GMII; 879 break; 880 default: 881 dev_err(priv->device, "Unsupported interface mode: %s", 882 phy_modes(priv->plat->interface)); 883 return -EINVAL; 884 } 885 886 regmap_write(gmac->regmap, SYSCON_EMAC_REG, reg); 887 888 return 0; 889 } 890 891 static void sun8i_dwmac_unset_syscon(struct sunxi_priv_data *gmac) 892 { 893 u32 reg = gmac->variant->default_syscon_value; 894 895 regmap_write(gmac->regmap, SYSCON_EMAC_REG, reg); 896 } 897 898 static void sun8i_dwmac_exit(struct platform_device *pdev, void *priv) 899 { 900 struct sunxi_priv_data *gmac = priv; 901 902 if (gmac->variant->soc_has_internal_phy) { 903 /* sun8i_dwmac_exit could be called with mdiomux uninit */ 904 if (gmac->mux_handle) 905 mdio_mux_uninit(gmac->mux_handle); 906 if (gmac->internal_phy_powered) 907 sun8i_dwmac_unpower_internal_phy(gmac); 908 } 909 910 sun8i_dwmac_unset_syscon(gmac); 911 912 reset_control_put(gmac->rst_ephy); 913 914 clk_disable_unprepare(gmac->tx_clk); 915 916 if (gmac->regulator) 917 regulator_disable(gmac->regulator); 918 } 919 920 static const struct stmmac_ops sun8i_dwmac_ops = { 921 .core_init = sun8i_dwmac_core_init, 922 .set_mac = sun8i_dwmac_set_mac, 923 .dump_regs = sun8i_dwmac_dump_mac_regs, 924 .rx_ipc = sun8i_dwmac_rx_ipc_enable, 925 .set_filter = sun8i_dwmac_set_filter, 926 .flow_ctrl = sun8i_dwmac_flow_ctrl, 927 .set_umac_addr = sun8i_dwmac_set_umac_addr, 928 .get_umac_addr = sun8i_dwmac_get_umac_addr, 929 }; 930 931 static struct mac_device_info *sun8i_dwmac_setup(void *ppriv) 932 { 933 struct mac_device_info *mac; 934 struct stmmac_priv *priv = ppriv; 935 int ret; 936 937 mac = devm_kzalloc(priv->device, sizeof(*mac), GFP_KERNEL); 938 if (!mac) 939 return NULL; 940 941 ret = sun8i_dwmac_set_syscon(priv); 942 if (ret) 943 return NULL; 944 945 mac->pcsr = priv->ioaddr; 946 mac->mac = &sun8i_dwmac_ops; 947 mac->dma = &sun8i_dwmac_dma_ops; 948 949 /* The loopback bit seems to be re-set when link change 950 * Simply mask it each time 951 * Speed 10/100/1000 are set in BIT(2)/BIT(3) 952 */ 953 mac->link.speed_mask = GENMASK(3, 2) | EMAC_LOOPBACK; 954 mac->link.speed10 = EMAC_SPEED_10; 955 mac->link.speed100 = EMAC_SPEED_100; 956 mac->link.speed1000 = EMAC_SPEED_1000; 957 mac->link.duplex = EMAC_DUPLEX_FULL; 958 mac->mii.addr = EMAC_MDIO_CMD; 959 mac->mii.data = EMAC_MDIO_DATA; 960 mac->mii.reg_shift = 4; 961 mac->mii.reg_mask = GENMASK(8, 4); 962 mac->mii.addr_shift = 12; 963 mac->mii.addr_mask = GENMASK(16, 12); 964 mac->mii.clk_csr_shift = 20; 965 mac->mii.clk_csr_mask = GENMASK(22, 20); 966 mac->unicast_filter_entries = 8; 967 968 /* Synopsys Id is not available */ 969 priv->synopsys_id = 0; 970 971 return mac; 972 } 973 974 static int sun8i_dwmac_probe(struct platform_device *pdev) 975 { 976 struct plat_stmmacenet_data *plat_dat; 977 struct stmmac_resources stmmac_res; 978 struct sunxi_priv_data *gmac; 979 struct device *dev = &pdev->dev; 980 int ret; 981 struct stmmac_priv *priv; 982 struct net_device *ndev; 983 984 ret = stmmac_get_platform_resources(pdev, &stmmac_res); 985 if (ret) 986 return ret; 987 988 plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac); 989 if (IS_ERR(plat_dat)) 990 return PTR_ERR(plat_dat); 991 992 gmac = devm_kzalloc(dev, sizeof(*gmac), GFP_KERNEL); 993 if (!gmac) 994 return -ENOMEM; 995 996 gmac->variant = of_device_get_match_data(&pdev->dev); 997 if (!gmac->variant) { 998 dev_err(&pdev->dev, "Missing dwmac-sun8i variant\n"); 999 return -EINVAL; 1000 } 1001 1002 gmac->tx_clk = devm_clk_get(dev, "stmmaceth"); 1003 if (IS_ERR(gmac->tx_clk)) { 1004 dev_err(dev, "Could not get TX clock\n"); 1005 return PTR_ERR(gmac->tx_clk); 1006 } 1007 1008 /* Optional regulator for PHY */ 1009 gmac->regulator = devm_regulator_get_optional(dev, "phy"); 1010 if (IS_ERR(gmac->regulator)) { 1011 if (PTR_ERR(gmac->regulator) == -EPROBE_DEFER) 1012 return -EPROBE_DEFER; 1013 dev_info(dev, "No regulator found\n"); 1014 gmac->regulator = NULL; 1015 } 1016 1017 gmac->regmap = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, 1018 "syscon"); 1019 if (IS_ERR(gmac->regmap)) { 1020 ret = PTR_ERR(gmac->regmap); 1021 dev_err(&pdev->dev, "Unable to map syscon: %d\n", ret); 1022 return ret; 1023 } 1024 1025 plat_dat->interface = of_get_phy_mode(dev->of_node); 1026 1027 /* platform data specifying hardware features and callbacks. 1028 * hardware features were copied from Allwinner drivers. 1029 */ 1030 plat_dat->rx_coe = STMMAC_RX_COE_TYPE2; 1031 plat_dat->tx_coe = 1; 1032 plat_dat->has_sun8i = true; 1033 plat_dat->bsp_priv = gmac; 1034 plat_dat->init = sun8i_dwmac_init; 1035 plat_dat->exit = sun8i_dwmac_exit; 1036 plat_dat->setup = sun8i_dwmac_setup; 1037 1038 ret = sun8i_dwmac_init(pdev, plat_dat->bsp_priv); 1039 if (ret) 1040 return ret; 1041 1042 ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res); 1043 if (ret) 1044 goto dwmac_exit; 1045 1046 ndev = dev_get_drvdata(&pdev->dev); 1047 priv = netdev_priv(ndev); 1048 /* The mux must be registered after parent MDIO 1049 * so after stmmac_dvr_probe() 1050 */ 1051 if (gmac->variant->soc_has_internal_phy) { 1052 ret = get_ephy_nodes(priv); 1053 if (ret) 1054 goto dwmac_exit; 1055 ret = sun8i_dwmac_register_mdio_mux(priv); 1056 if (ret) { 1057 dev_err(&pdev->dev, "Failed to register mux\n"); 1058 goto dwmac_mux; 1059 } 1060 } else { 1061 ret = sun8i_dwmac_reset(priv); 1062 if (ret) 1063 goto dwmac_exit; 1064 } 1065 1066 return ret; 1067 dwmac_mux: 1068 sun8i_dwmac_unset_syscon(gmac); 1069 dwmac_exit: 1070 sun8i_dwmac_exit(pdev, plat_dat->bsp_priv); 1071 return ret; 1072 } 1073 1074 static const struct of_device_id sun8i_dwmac_match[] = { 1075 { .compatible = "allwinner,sun8i-h3-emac", 1076 .data = &emac_variant_h3 }, 1077 { .compatible = "allwinner,sun8i-v3s-emac", 1078 .data = &emac_variant_v3s }, 1079 { .compatible = "allwinner,sun8i-a83t-emac", 1080 .data = &emac_variant_a83t }, 1081 { .compatible = "allwinner,sun50i-a64-emac", 1082 .data = &emac_variant_a64 }, 1083 { } 1084 }; 1085 MODULE_DEVICE_TABLE(of, sun8i_dwmac_match); 1086 1087 static struct platform_driver sun8i_dwmac_driver = { 1088 .probe = sun8i_dwmac_probe, 1089 .remove = stmmac_pltfr_remove, 1090 .driver = { 1091 .name = "dwmac-sun8i", 1092 .pm = &stmmac_pltfr_pm_ops, 1093 .of_match_table = sun8i_dwmac_match, 1094 }, 1095 }; 1096 module_platform_driver(sun8i_dwmac_driver); 1097 1098 MODULE_AUTHOR("Corentin Labbe <clabbe.montjoie@gmail.com>"); 1099 MODULE_DESCRIPTION("Allwinner sun8i DWMAC specific glue layer"); 1100 MODULE_LICENSE("GPL"); 1101