1 // SPDX-License-Identifier: GPL-2.0
2 /* Copyright (c) 2020, Loongson Corporation
3  */
4 
5 #include <linux/clk-provider.h>
6 #include <linux/pci.h>
7 #include <linux/dmi.h>
8 #include <linux/device.h>
9 #include <linux/of_irq.h>
10 #include "stmmac.h"
11 
12 static int loongson_default_data(struct plat_stmmacenet_data *plat)
13 {
14 	plat->clk_csr = 2;	/* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
15 	plat->has_gmac = 1;
16 	plat->force_sf_dma_mode = 1;
17 
18 	/* Set default value for multicast hash bins */
19 	plat->multicast_filter_bins = HASH_TABLE_SIZE;
20 
21 	/* Set default value for unicast filter entries */
22 	plat->unicast_filter_entries = 1;
23 
24 	/* Set the maxmtu to a default of JUMBO_LEN */
25 	plat->maxmtu = JUMBO_LEN;
26 
27 	/* Set default number of RX and TX queues to use */
28 	plat->tx_queues_to_use = 1;
29 	plat->rx_queues_to_use = 1;
30 
31 	/* Disable Priority config by default */
32 	plat->tx_queues_cfg[0].use_prio = false;
33 	plat->rx_queues_cfg[0].use_prio = false;
34 
35 	/* Disable RX queues routing by default */
36 	plat->rx_queues_cfg[0].pkt_route = 0x0;
37 
38 	/* Default to phy auto-detection */
39 	plat->phy_addr = -1;
40 
41 	plat->dma_cfg->pbl = 32;
42 	plat->dma_cfg->pblx8 = true;
43 
44 	plat->multicast_filter_bins = 256;
45 	return 0;
46 }
47 
48 static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id *id)
49 {
50 	struct plat_stmmacenet_data *plat;
51 	struct stmmac_resources res;
52 	struct device_node *np;
53 	int ret, i, phy_mode;
54 
55 	np = dev_of_node(&pdev->dev);
56 
57 	if (!np) {
58 		pr_info("dwmac_loongson_pci: No OF node\n");
59 		return -ENODEV;
60 	}
61 
62 	if (!of_device_is_compatible(np, "loongson, pci-gmac")) {
63 		pr_info("dwmac_loongson_pci: Incompatible OF node\n");
64 		return -ENODEV;
65 	}
66 
67 	plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
68 	if (!plat)
69 		return -ENOMEM;
70 
71 	plat->mdio_bus_data = devm_kzalloc(&pdev->dev,
72 					   sizeof(*plat->mdio_bus_data),
73 					   GFP_KERNEL);
74 	if (!plat->mdio_bus_data)
75 		return -ENOMEM;
76 
77 	plat->mdio_node = of_get_child_by_name(np, "mdio");
78 	if (plat->mdio_node) {
79 		dev_info(&pdev->dev, "Found MDIO subnode\n");
80 		plat->mdio_bus_data->needs_reset = true;
81 	}
82 
83 	plat->dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*plat->dma_cfg), GFP_KERNEL);
84 	if (!plat->dma_cfg) {
85 		ret = -ENOMEM;
86 		goto err_put_node;
87 	}
88 
89 	/* Enable pci device */
90 	ret = pci_enable_device(pdev);
91 	if (ret) {
92 		dev_err(&pdev->dev, "%s: ERROR: failed to enable device\n", __func__);
93 		goto err_put_node;
94 	}
95 
96 	/* Get the base address of device */
97 	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
98 		if (pci_resource_len(pdev, i) == 0)
99 			continue;
100 		ret = pcim_iomap_regions(pdev, BIT(0), pci_name(pdev));
101 		if (ret)
102 			goto err_disable_device;
103 		break;
104 	}
105 
106 	plat->bus_id = of_alias_get_id(np, "ethernet");
107 	if (plat->bus_id < 0)
108 		plat->bus_id = pci_dev_id(pdev);
109 
110 	phy_mode = device_get_phy_mode(&pdev->dev);
111 	if (phy_mode < 0) {
112 		dev_err(&pdev->dev, "phy_mode not found\n");
113 		ret = phy_mode;
114 		goto err_disable_device;
115 	}
116 
117 	plat->phy_interface = phy_mode;
118 	plat->mac_interface = PHY_INTERFACE_MODE_GMII;
119 
120 	pci_set_master(pdev);
121 
122 	loongson_default_data(plat);
123 	pci_enable_msi(pdev);
124 	memset(&res, 0, sizeof(res));
125 	res.addr = pcim_iomap_table(pdev)[0];
126 
127 	res.irq = of_irq_get_byname(np, "macirq");
128 	if (res.irq < 0) {
129 		dev_err(&pdev->dev, "IRQ macirq not found\n");
130 		ret = -ENODEV;
131 		goto err_disable_msi;
132 	}
133 
134 	res.wol_irq = of_irq_get_byname(np, "eth_wake_irq");
135 	if (res.wol_irq < 0) {
136 		dev_info(&pdev->dev, "IRQ eth_wake_irq not found, using macirq\n");
137 		res.wol_irq = res.irq;
138 	}
139 
140 	res.lpi_irq = of_irq_get_byname(np, "eth_lpi");
141 	if (res.lpi_irq < 0) {
142 		dev_err(&pdev->dev, "IRQ eth_lpi not found\n");
143 		ret = -ENODEV;
144 		goto err_disable_msi;
145 	}
146 
147 	ret = stmmac_dvr_probe(&pdev->dev, plat, &res);
148 	if (ret)
149 		goto err_disable_msi;
150 
151 	return ret;
152 
153 err_disable_msi:
154 	pci_disable_msi(pdev);
155 err_disable_device:
156 	pci_disable_device(pdev);
157 err_put_node:
158 	of_node_put(plat->mdio_node);
159 	return ret;
160 }
161 
162 static void loongson_dwmac_remove(struct pci_dev *pdev)
163 {
164 	struct net_device *ndev = dev_get_drvdata(&pdev->dev);
165 	struct stmmac_priv *priv = netdev_priv(ndev);
166 	int i;
167 
168 	of_node_put(priv->plat->mdio_node);
169 	stmmac_dvr_remove(&pdev->dev);
170 
171 	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
172 		if (pci_resource_len(pdev, i) == 0)
173 			continue;
174 		pcim_iounmap_regions(pdev, BIT(i));
175 		break;
176 	}
177 
178 	pci_disable_msi(pdev);
179 	pci_disable_device(pdev);
180 }
181 
182 static int __maybe_unused loongson_dwmac_suspend(struct device *dev)
183 {
184 	struct pci_dev *pdev = to_pci_dev(dev);
185 	int ret;
186 
187 	ret = stmmac_suspend(dev);
188 	if (ret)
189 		return ret;
190 
191 	ret = pci_save_state(pdev);
192 	if (ret)
193 		return ret;
194 
195 	pci_disable_device(pdev);
196 	pci_wake_from_d3(pdev, true);
197 	return 0;
198 }
199 
200 static int __maybe_unused loongson_dwmac_resume(struct device *dev)
201 {
202 	struct pci_dev *pdev = to_pci_dev(dev);
203 	int ret;
204 
205 	pci_restore_state(pdev);
206 	pci_set_power_state(pdev, PCI_D0);
207 
208 	ret = pci_enable_device(pdev);
209 	if (ret)
210 		return ret;
211 
212 	pci_set_master(pdev);
213 
214 	return stmmac_resume(dev);
215 }
216 
217 static SIMPLE_DEV_PM_OPS(loongson_dwmac_pm_ops, loongson_dwmac_suspend,
218 			 loongson_dwmac_resume);
219 
220 static const struct pci_device_id loongson_dwmac_id_table[] = {
221 	{ PCI_VDEVICE(LOONGSON, 0x7a03) },
222 	{}
223 };
224 MODULE_DEVICE_TABLE(pci, loongson_dwmac_id_table);
225 
226 static struct pci_driver loongson_dwmac_driver = {
227 	.name = "dwmac-loongson-pci",
228 	.id_table = loongson_dwmac_id_table,
229 	.probe = loongson_dwmac_probe,
230 	.remove = loongson_dwmac_remove,
231 	.driver = {
232 		.pm = &loongson_dwmac_pm_ops,
233 	},
234 };
235 
236 module_pci_driver(loongson_dwmac_driver);
237 
238 MODULE_DESCRIPTION("Loongson DWMAC PCI driver");
239 MODULE_AUTHOR("Qing Zhang <zhangqing@loongson.cn>");
240 MODULE_LICENSE("GPL v2");
241