1# SPDX-License-Identifier: GPL-2.0-only
2config STMMAC_ETH
3	tristate "STMicroelectronics Multi-Gigabit Ethernet driver"
4	depends on HAS_IOMEM && HAS_DMA
5	depends on PTP_1588_CLOCK_OPTIONAL
6	select MII
7	select PCS_XPCS
8	select PAGE_POOL
9	select PHYLINK
10	select CRC32
11	select RESET_CONTROLLER
12	help
13	  This is the driver for the Ethernet IPs built around a
14	  Synopsys IP Core.
15
16if STMMAC_ETH
17
18config STMMAC_SELFTESTS
19	bool "Support for STMMAC Selftests"
20	depends on INET
21	depends on STMMAC_ETH
22	default n
23	help
24	  This adds support for STMMAC Selftests using ethtool. Enable this
25	  feature if you are facing problems with your HW and submit the test
26	  results to the netdev Mailing List.
27
28config STMMAC_PLATFORM
29	tristate "STMMAC Platform bus support"
30	depends on STMMAC_ETH
31	select MFD_SYSCON
32	default y
33	help
34	  This selects the platform specific bus support for the stmmac driver.
35	  This is the driver used on several SoCs:
36	  STi, Allwinner, Amlogic Meson, Altera SOCFPGA.
37
38	  If you have a controller with this interface, say Y or M here.
39
40	  If unsure, say N.
41
42if STMMAC_PLATFORM
43
44config DWMAC_DWC_QOS_ETH
45	tristate "Support for snps,dwc-qos-ethernet.txt DT binding."
46	select CRC32
47	select MII
48	depends on OF && HAS_DMA
49	help
50	  Support for chips using the snps,dwc-qos-ethernet.txt DT binding.
51
52config DWMAC_GENERIC
53	tristate "Generic driver for DWMAC"
54	default STMMAC_PLATFORM
55	help
56	  Generic DWMAC driver for platforms that don't require any
57	  platform specific code to function or is using platform
58	  data for setup.
59
60config DWMAC_ANARION
61	tristate "Adaptrum Anarion GMAC support"
62	default ARC
63	depends on OF && (ARC || COMPILE_TEST)
64	help
65	  Support for Adaptrum Anarion GMAC Ethernet controller.
66
67	  This selects the Anarion SoC glue layer support for the stmmac driver.
68
69config DWMAC_INGENIC
70	tristate "Ingenic MAC support"
71	default MACH_INGENIC
72	depends on OF && HAS_IOMEM && (MACH_INGENIC || COMPILE_TEST)
73	select MFD_SYSCON
74	help
75	  Support for ethernet controller on Ingenic SoCs.
76
77	  This selects Ingenic SoCs glue layer support for the stmmac
78	  device driver. This driver is used on for the Ingenic SoCs
79	  MAC ethernet controller.
80
81config DWMAC_IPQ806X
82	tristate "QCA IPQ806x DWMAC support"
83	default ARCH_QCOM
84	depends on OF && (ARCH_QCOM || COMPILE_TEST)
85	select MFD_SYSCON
86	help
87	  Support for QCA IPQ806X DWMAC Ethernet.
88
89	  This selects the IPQ806x SoC glue layer support for the stmmac
90	  device driver. This driver does not use any of the hardware
91	  acceleration features available on this SoC. Network devices
92	  will behave like standard non-accelerated ethernet interfaces.
93
94	  Select the QCOM_SOCINFO config flag to enable specific dwmac
95	  fixup based on the ipq806x SoC revision.
96
97config DWMAC_LPC18XX
98	tristate "NXP LPC18xx/43xx DWMAC support"
99	default ARCH_LPC18XX
100	depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
101	select MFD_SYSCON
102	help
103	  Support for NXP LPC18xx/43xx DWMAC Ethernet.
104
105config DWMAC_MEDIATEK
106	tristate "MediaTek MT27xx GMAC support"
107	depends on OF && (ARCH_MEDIATEK || COMPILE_TEST)
108	help
109	  Support for MediaTek GMAC Ethernet controller.
110
111	  This selects the MT2712 SoC support for the stmmac driver.
112
113config DWMAC_MESON
114	tristate "Amlogic Meson dwmac support"
115	default ARCH_MESON
116	depends on OF && COMMON_CLK && (ARCH_MESON || COMPILE_TEST)
117	help
118	  Support for Ethernet controller on Amlogic Meson SoCs.
119
120	  This selects the Amlogic Meson SoC glue layer support for
121	  the stmmac device driver. This driver is used for Meson6,
122	  Meson8, Meson8b and GXBB SoCs.
123
124config DWMAC_OXNAS
125	tristate "Oxford Semiconductor OXNAS dwmac support"
126	default ARCH_OXNAS
127	depends on OF && COMMON_CLK && (ARCH_OXNAS || COMPILE_TEST)
128	select MFD_SYSCON
129	help
130	  Support for Ethernet controller on Oxford Semiconductor OXNAS SoCs.
131
132	  This selects the Oxford Semiconductor OXNASSoC glue layer support for
133	  the stmmac device driver. This driver is used for OX820.
134
135config DWMAC_QCOM_ETHQOS
136	tristate "Qualcomm ETHQOS support"
137	default ARCH_QCOM
138	depends on OF && (ARCH_QCOM || COMPILE_TEST)
139	help
140	  Support for the Qualcomm ETHQOS core.
141
142	  This selects the Qualcomm ETHQOS glue layer support for the
143	  stmmac device driver.
144
145config DWMAC_ROCKCHIP
146	tristate "Rockchip dwmac support"
147	default ARCH_ROCKCHIP
148	depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
149	select MFD_SYSCON
150	help
151	  Support for Ethernet controller on Rockchip RK3288 SoC.
152
153	  This selects the Rockchip RK3288 SoC glue layer support for
154	  the stmmac device driver.
155
156config DWMAC_SOCFPGA
157	tristate "SOCFPGA dwmac support"
158	default ARCH_INTEL_SOCFPGA
159	depends on OF && (ARCH_INTEL_SOCFPGA || COMPILE_TEST)
160	select MFD_SYSCON
161	select MDIO_REGMAP
162	select REGMAP_MMIO
163	select PCS_LYNX
164	help
165	  Support for ethernet controller on Altera SOCFPGA
166
167	  This selects the Altera SOCFPGA SoC glue layer support
168	  for the stmmac device driver. This driver is used for
169	  arria5 and cyclone5 FPGA SoCs.
170
171config DWMAC_STARFIVE
172	tristate "StarFive dwmac support"
173	depends on OF && (ARCH_STARFIVE || COMPILE_TEST)
174	select MFD_SYSCON
175	default m if ARCH_STARFIVE
176	help
177	  Support for ethernet controllers on StarFive RISC-V SoCs
178
179	  This selects the StarFive platform specific glue layer support for
180	  the stmmac device driver. This driver is used for StarFive JH7110
181	  ethernet controller.
182
183config DWMAC_STI
184	tristate "STi GMAC support"
185	default ARCH_STI
186	depends on OF && (ARCH_STI || COMPILE_TEST)
187	select MFD_SYSCON
188	help
189	  Support for ethernet controller on STi SOCs.
190
191	  This selects STi SoC glue layer support for the stmmac
192	  device driver. This driver is used on for the STi series
193	  SOCs GMAC ethernet controller.
194
195config DWMAC_STM32
196	tristate "STM32 DWMAC support"
197	default ARCH_STM32
198	depends on OF && HAS_IOMEM && (ARCH_STM32 || COMPILE_TEST)
199	select MFD_SYSCON
200	help
201	  Support for ethernet controller on STM32 SOCs.
202
203	  This selects STM32 SoC glue layer support for the stmmac
204	  device driver. This driver is used on for the STM32 series
205	  SOCs GMAC ethernet controller.
206
207config DWMAC_SUNXI
208	tristate "Allwinner GMAC support"
209	default ARCH_SUNXI
210	depends on OF && (ARCH_SUNXI || COMPILE_TEST)
211	help
212	  Support for Allwinner A20/A31 GMAC ethernet controllers.
213
214	  This selects Allwinner SoC glue layer support for the
215	  stmmac device driver. This driver is used for A20/A31
216	  GMAC ethernet controller.
217
218config DWMAC_SUN8I
219	tristate "Allwinner sun8i GMAC support"
220	default ARCH_SUNXI
221	depends on OF && (ARCH_SUNXI || COMPILE_TEST)
222	select MDIO_BUS_MUX
223	help
224	  Support for Allwinner H3 A83T A64 EMAC ethernet controllers.
225
226	  This selects Allwinner SoC glue layer support for the
227	  stmmac device driver. This driver is used for H3/A83T/A64
228	  EMAC ethernet controller.
229
230config DWMAC_IMX8
231	tristate "NXP IMX8 DWMAC support"
232	default ARCH_MXC
233	depends on OF && (ARCH_MXC || COMPILE_TEST)
234	select MFD_SYSCON
235	help
236	  Support for ethernet controller on NXP i.MX8 SOCs.
237
238	  This selects NXP SoC glue layer support for the stmmac
239	  device driver. This driver is used for i.MX8 series like
240	  iMX8MP/iMX8DXL GMAC ethernet controller.
241
242config DWMAC_INTEL_PLAT
243	tristate "Intel dwmac support"
244	depends on OF && COMMON_CLK
245	depends on STMMAC_ETH
246	help
247	  Support for ethernet controllers on Intel SoCs
248
249	  This selects the Intel platform specific glue layer support for
250	  the stmmac device driver. This driver is used for the Intel Keem Bay
251	  SoC.
252
253config DWMAC_TEGRA
254	tristate "NVIDIA Tegra MGBE support"
255	depends on ARCH_TEGRA || COMPILE_TEST
256	help
257	  This selects the Multi-GigaBit Ethernet (MGBE) Controller that is
258	  found on the NVIDIA Tegra SoC devices. This driver provides the glue
259	  layer on top of the stmmac driver required for these NVIDIA Tegra SoC
260	  devices.
261
262config DWMAC_VISCONTI
263	tristate "Toshiba Visconti DWMAC support"
264	default ARCH_VISCONTI
265	depends on OF && COMMON_CLK && (ARCH_VISCONTI || COMPILE_TEST)
266	help
267	  Support for ethernet controller on Visconti SoCs.
268
269endif
270
271config DWMAC_INTEL
272	tristate "Intel GMAC support"
273	default X86
274	depends on X86 && STMMAC_ETH && PCI
275	depends on COMMON_CLK
276	help
277	  This selects the Intel platform specific bus support for the
278	  stmmac driver. This driver is used for Intel Quark/EHL/TGL.
279
280config DWMAC_LOONGSON
281	tristate "Loongson PCI DWMAC support"
282	default MACH_LOONGSON64
283	depends on STMMAC_ETH && PCI
284	depends on COMMON_CLK
285	help
286	  This selects the LOONGSON PCI bus support for the stmmac driver,
287	  Support for ethernet controller on Loongson-2K1000 SoC and LS7A1000 bridge.
288
289config STMMAC_PCI
290	tristate "STMMAC PCI bus support"
291	depends on STMMAC_ETH && PCI
292	depends on COMMON_CLK
293	help
294	  This selects the platform specific bus support for the stmmac driver.
295	  This driver was tested on XLINX XC2V3000 FF1152AMT0221
296	  D1215994A VIRTEX FPGA board and SNPS QoS IPK Prototyping Kit.
297
298	  If you have a controller with this interface, say Y or M here.
299
300	  If unsure, say N.
301endif
302