1# SPDX-License-Identifier: GPL-2.0-only
2config STMMAC_ETH
3	tristate "STMicroelectronics Multi-Gigabit Ethernet driver"
4	depends on HAS_IOMEM && HAS_DMA
5	depends on PTP_1588_CLOCK_OPTIONAL
6	select MII
7	select PCS_XPCS
8	select PAGE_POOL
9	select PHYLINK
10	select CRC32
11	select RESET_CONTROLLER
12	help
13	  This is the driver for the Ethernet IPs built around a
14	  Synopsys IP Core.
15
16if STMMAC_ETH
17
18config STMMAC_SELFTESTS
19	bool "Support for STMMAC Selftests"
20	depends on INET
21	depends on STMMAC_ETH
22	default n
23	help
24	  This adds support for STMMAC Selftests using ethtool. Enable this
25	  feature if you are facing problems with your HW and submit the test
26	  results to the netdev Mailing List.
27
28config STMMAC_PLATFORM
29	tristate "STMMAC Platform bus support"
30	depends on STMMAC_ETH
31	select MFD_SYSCON
32	default y
33	help
34	  This selects the platform specific bus support for the stmmac driver.
35	  This is the driver used on several SoCs:
36	  STi, Allwinner, Amlogic Meson, Altera SOCFPGA.
37
38	  If you have a controller with this interface, say Y or M here.
39
40	  If unsure, say N.
41
42if STMMAC_PLATFORM
43
44config DWMAC_DWC_QOS_ETH
45	tristate "Support for snps,dwc-qos-ethernet.txt DT binding."
46	select CRC32
47	select MII
48	depends on OF && HAS_DMA
49	help
50	  Support for chips using the snps,dwc-qos-ethernet.txt DT binding.
51
52config DWMAC_GENERIC
53	tristate "Generic driver for DWMAC"
54	default STMMAC_PLATFORM
55	help
56	  Generic DWMAC driver for platforms that don't require any
57	  platform specific code to function or is using platform
58	  data for setup.
59
60config DWMAC_ANARION
61	tristate "Adaptrum Anarion GMAC support"
62	default ARC
63	depends on OF && (ARC || COMPILE_TEST)
64	help
65	  Support for Adaptrum Anarion GMAC Ethernet controller.
66
67	  This selects the Anarion SoC glue layer support for the stmmac driver.
68
69config DWMAC_INGENIC
70	tristate "Ingenic MAC support"
71	default MACH_INGENIC
72	depends on OF && HAS_IOMEM && (MACH_INGENIC || COMPILE_TEST)
73	select MFD_SYSCON
74	help
75	  Support for ethernet controller on Ingenic SoCs.
76
77	  This selects Ingenic SoCs glue layer support for the stmmac
78	  device driver. This driver is used on for the Ingenic SoCs
79	  MAC ethernet controller.
80
81config DWMAC_IPQ806X
82	tristate "QCA IPQ806x DWMAC support"
83	default ARCH_QCOM
84	depends on OF && (ARCH_QCOM || COMPILE_TEST)
85	select MFD_SYSCON
86	help
87	  Support for QCA IPQ806X DWMAC Ethernet.
88
89	  This selects the IPQ806x SoC glue layer support for the stmmac
90	  device driver. This driver does not use any of the hardware
91	  acceleration features available on this SoC. Network devices
92	  will behave like standard non-accelerated ethernet interfaces.
93
94	  Select the QCOM_SOCINFO config flag to enable specific dwmac
95	  fixup based on the ipq806x SoC revision.
96
97config DWMAC_LPC18XX
98	tristate "NXP LPC18xx/43xx DWMAC support"
99	default ARCH_LPC18XX
100	depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
101	select MFD_SYSCON
102	help
103	  Support for NXP LPC18xx/43xx DWMAC Ethernet.
104
105config DWMAC_MEDIATEK
106	tristate "MediaTek MT27xx GMAC support"
107	depends on OF && (ARCH_MEDIATEK || COMPILE_TEST)
108	help
109	  Support for MediaTek GMAC Ethernet controller.
110
111	  This selects the MT2712 SoC support for the stmmac driver.
112
113config DWMAC_MESON
114	tristate "Amlogic Meson dwmac support"
115	default ARCH_MESON
116	depends on OF && COMMON_CLK && (ARCH_MESON || COMPILE_TEST)
117	help
118	  Support for Ethernet controller on Amlogic Meson SoCs.
119
120	  This selects the Amlogic Meson SoC glue layer support for
121	  the stmmac device driver. This driver is used for Meson6,
122	  Meson8, Meson8b and GXBB SoCs.
123
124config DWMAC_QCOM_ETHQOS
125	tristate "Qualcomm ETHQOS support"
126	default ARCH_QCOM
127	depends on OF && (ARCH_QCOM || COMPILE_TEST)
128	help
129	  Support for the Qualcomm ETHQOS core.
130
131	  This selects the Qualcomm ETHQOS glue layer support for the
132	  stmmac device driver.
133
134config DWMAC_ROCKCHIP
135	tristate "Rockchip dwmac support"
136	default ARCH_ROCKCHIP
137	depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
138	select MFD_SYSCON
139	help
140	  Support for Ethernet controller on Rockchip RK3288 SoC.
141
142	  This selects the Rockchip RK3288 SoC glue layer support for
143	  the stmmac device driver.
144
145config DWMAC_SOCFPGA
146	tristate "SOCFPGA dwmac support"
147	default ARCH_INTEL_SOCFPGA
148	depends on OF && (ARCH_INTEL_SOCFPGA || COMPILE_TEST)
149	select MFD_SYSCON
150	select MDIO_REGMAP
151	select REGMAP_MMIO
152	select PCS_LYNX
153	help
154	  Support for ethernet controller on Altera SOCFPGA
155
156	  This selects the Altera SOCFPGA SoC glue layer support
157	  for the stmmac device driver. This driver is used for
158	  arria5 and cyclone5 FPGA SoCs.
159
160config DWMAC_STARFIVE
161	tristate "StarFive dwmac support"
162	depends on OF && (ARCH_STARFIVE || COMPILE_TEST)
163	select MFD_SYSCON
164	default m if ARCH_STARFIVE
165	help
166	  Support for ethernet controllers on StarFive RISC-V SoCs
167
168	  This selects the StarFive platform specific glue layer support for
169	  the stmmac device driver. This driver is used for StarFive JH7110
170	  ethernet controller.
171
172config DWMAC_STI
173	tristate "STi GMAC support"
174	default ARCH_STI
175	depends on OF && (ARCH_STI || COMPILE_TEST)
176	select MFD_SYSCON
177	help
178	  Support for ethernet controller on STi SOCs.
179
180	  This selects STi SoC glue layer support for the stmmac
181	  device driver. This driver is used on for the STi series
182	  SOCs GMAC ethernet controller.
183
184config DWMAC_STM32
185	tristate "STM32 DWMAC support"
186	default ARCH_STM32
187	depends on OF && HAS_IOMEM && (ARCH_STM32 || COMPILE_TEST)
188	select MFD_SYSCON
189	help
190	  Support for ethernet controller on STM32 SOCs.
191
192	  This selects STM32 SoC glue layer support for the stmmac
193	  device driver. This driver is used on for the STM32 series
194	  SOCs GMAC ethernet controller.
195
196config DWMAC_SUNXI
197	tristate "Allwinner GMAC support"
198	default ARCH_SUNXI
199	depends on OF && (ARCH_SUNXI || COMPILE_TEST)
200	help
201	  Support for Allwinner A20/A31 GMAC ethernet controllers.
202
203	  This selects Allwinner SoC glue layer support for the
204	  stmmac device driver. This driver is used for A20/A31
205	  GMAC ethernet controller.
206
207config DWMAC_SUN8I
208	tristate "Allwinner sun8i GMAC support"
209	default ARCH_SUNXI
210	depends on OF && (ARCH_SUNXI || COMPILE_TEST)
211	select MDIO_BUS_MUX
212	help
213	  Support for Allwinner H3 A83T A64 EMAC ethernet controllers.
214
215	  This selects Allwinner SoC glue layer support for the
216	  stmmac device driver. This driver is used for H3/A83T/A64
217	  EMAC ethernet controller.
218
219config DWMAC_IMX8
220	tristate "NXP IMX8 DWMAC support"
221	default ARCH_MXC
222	depends on OF && (ARCH_MXC || COMPILE_TEST)
223	select MFD_SYSCON
224	help
225	  Support for ethernet controller on NXP i.MX8 SOCs.
226
227	  This selects NXP SoC glue layer support for the stmmac
228	  device driver. This driver is used for i.MX8 series like
229	  iMX8MP/iMX8DXL GMAC ethernet controller.
230
231config DWMAC_INTEL_PLAT
232	tristate "Intel dwmac support"
233	depends on OF && COMMON_CLK
234	depends on STMMAC_ETH
235	help
236	  Support for ethernet controllers on Intel SoCs
237
238	  This selects the Intel platform specific glue layer support for
239	  the stmmac device driver. This driver is used for the Intel Keem Bay
240	  SoC.
241
242config DWMAC_TEGRA
243	tristate "NVIDIA Tegra MGBE support"
244	depends on ARCH_TEGRA || COMPILE_TEST
245	help
246	  This selects the Multi-GigaBit Ethernet (MGBE) Controller that is
247	  found on the NVIDIA Tegra SoC devices. This driver provides the glue
248	  layer on top of the stmmac driver required for these NVIDIA Tegra SoC
249	  devices.
250
251config DWMAC_VISCONTI
252	tristate "Toshiba Visconti DWMAC support"
253	default ARCH_VISCONTI
254	depends on OF && COMMON_CLK && (ARCH_VISCONTI || COMPILE_TEST)
255	help
256	  Support for ethernet controller on Visconti SoCs.
257
258endif
259
260config DWMAC_INTEL
261	tristate "Intel GMAC support"
262	default X86
263	depends on X86 && STMMAC_ETH && PCI
264	depends on COMMON_CLK
265	help
266	  This selects the Intel platform specific bus support for the
267	  stmmac driver. This driver is used for Intel Quark/EHL/TGL.
268
269config DWMAC_LOONGSON
270	tristate "Loongson PCI DWMAC support"
271	default MACH_LOONGSON64
272	depends on STMMAC_ETH && PCI
273	depends on COMMON_CLK
274	help
275	  This selects the LOONGSON PCI bus support for the stmmac driver,
276	  Support for ethernet controller on Loongson-2K1000 SoC and LS7A1000 bridge.
277
278config STMMAC_PCI
279	tristate "STMMAC PCI bus support"
280	depends on STMMAC_ETH && PCI
281	depends on COMMON_CLK
282	help
283	  This selects the platform specific bus support for the stmmac driver.
284	  This driver was tested on XLINX XC2V3000 FF1152AMT0221
285	  D1215994A VIRTEX FPGA board and SNPS QoS IPK Prototyping Kit.
286
287	  If you have a controller with this interface, say Y or M here.
288
289	  If unsure, say N.
290endif
291