1config STMMAC_ETH 2 tristate "STMicroelectronics 10/100/1000/EQOS Ethernet driver" 3 depends on HAS_IOMEM && HAS_DMA 4 select MII 5 select PHYLIB 6 select CRC32 7 imply PTP_1588_CLOCK 8 select RESET_CONTROLLER 9 ---help--- 10 This is the driver for the Ethernet IPs built around a 11 Synopsys IP Core. 12 13if STMMAC_ETH 14 15config STMMAC_PLATFORM 16 tristate "STMMAC Platform bus support" 17 depends on STMMAC_ETH 18 select MFD_SYSCON 19 default y 20 ---help--- 21 This selects the platform specific bus support for the stmmac driver. 22 This is the driver used on several SoCs: 23 STi, Allwinner, Amlogic Meson, Altera SOCFPGA. 24 25 If you have a controller with this interface, say Y or M here. 26 27 If unsure, say N. 28 29if STMMAC_PLATFORM 30 31config DWMAC_DWC_QOS_ETH 32 tristate "Support for snps,dwc-qos-ethernet.txt DT binding." 33 select PHYLIB 34 select CRC32 35 select MII 36 depends on OF && COMMON_CLK && HAS_DMA 37 help 38 Support for chips using the snps,dwc-qos-ethernet.txt DT binding. 39 40config DWMAC_GENERIC 41 tristate "Generic driver for DWMAC" 42 default STMMAC_PLATFORM 43 ---help--- 44 Generic DWMAC driver for platforms that don't require any 45 platform specific code to function or is using platform 46 data for setup. 47 48config DWMAC_ANARION 49 tristate "Adaptrum Anarion GMAC support" 50 default ARC 51 depends on OF && (ARC || COMPILE_TEST) 52 help 53 Support for Adaptrum Anarion GMAC Ethernet controller. 54 55 This selects the Anarion SoC glue layer support for the stmmac driver. 56 57config DWMAC_IPQ806X 58 tristate "QCA IPQ806x DWMAC support" 59 default ARCH_QCOM 60 depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST) 61 select MFD_SYSCON 62 help 63 Support for QCA IPQ806X DWMAC Ethernet. 64 65 This selects the IPQ806x SoC glue layer support for the stmmac 66 device driver. This driver does not use any of the hardware 67 acceleration features available on this SoC. Network devices 68 will behave like standard non-accelerated ethernet interfaces. 69 70config DWMAC_LPC18XX 71 tristate "NXP LPC18xx/43xx DWMAC support" 72 default ARCH_LPC18XX 73 depends on OF && (ARCH_LPC18XX || COMPILE_TEST) 74 select MFD_SYSCON 75 ---help--- 76 Support for NXP LPC18xx/43xx DWMAC Ethernet. 77 78config DWMAC_MESON 79 tristate "Amlogic Meson dwmac support" 80 default ARCH_MESON 81 depends on OF && COMMON_CLK && (ARCH_MESON || COMPILE_TEST) 82 help 83 Support for Ethernet controller on Amlogic Meson SoCs. 84 85 This selects the Amlogic Meson SoC glue layer support for 86 the stmmac device driver. This driver is used for Meson6, 87 Meson8, Meson8b and GXBB SoCs. 88 89config DWMAC_OXNAS 90 tristate "Oxford Semiconductor OXNAS dwmac support" 91 default ARCH_OXNAS 92 depends on OF && COMMON_CLK && (ARCH_OXNAS || COMPILE_TEST) 93 select MFD_SYSCON 94 help 95 Support for Ethernet controller on Oxford Semiconductor OXNAS SoCs. 96 97 This selects the Oxford Semiconductor OXNASSoC glue layer support for 98 the stmmac device driver. This driver is used for OX820. 99 100config DWMAC_ROCKCHIP 101 tristate "Rockchip dwmac support" 102 default ARCH_ROCKCHIP 103 depends on OF && COMMON_CLK && (ARCH_ROCKCHIP || COMPILE_TEST) 104 select MFD_SYSCON 105 help 106 Support for Ethernet controller on Rockchip RK3288 SoC. 107 108 This selects the Rockchip RK3288 SoC glue layer support for 109 the stmmac device driver. 110 111config DWMAC_SOCFPGA 112 tristate "SOCFPGA dwmac support" 113 default ARCH_SOCFPGA 114 depends on OF && (ARCH_SOCFPGA || COMPILE_TEST) 115 select MFD_SYSCON 116 help 117 Support for ethernet controller on Altera SOCFPGA 118 119 This selects the Altera SOCFPGA SoC glue layer support 120 for the stmmac device driver. This driver is used for 121 arria5 and cyclone5 FPGA SoCs. 122 123config DWMAC_STI 124 tristate "STi GMAC support" 125 default ARCH_STI 126 depends on OF && COMMON_CLK && (ARCH_STI || COMPILE_TEST) 127 select MFD_SYSCON 128 ---help--- 129 Support for ethernet controller on STi SOCs. 130 131 This selects STi SoC glue layer support for the stmmac 132 device driver. This driver is used on for the STi series 133 SOCs GMAC ethernet controller. 134 135config DWMAC_STM32 136 tristate "STM32 DWMAC support" 137 default ARCH_STM32 138 depends on OF && HAS_IOMEM && (ARCH_STM32 || COMPILE_TEST) 139 select MFD_SYSCON 140 ---help--- 141 Support for ethernet controller on STM32 SOCs. 142 143 This selects STM32 SoC glue layer support for the stmmac 144 device driver. This driver is used on for the STM32 series 145 SOCs GMAC ethernet controller. 146 147config DWMAC_SUNXI 148 tristate "Allwinner GMAC support" 149 default ARCH_SUNXI 150 depends on OF && COMMON_CLK && (ARCH_SUNXI || COMPILE_TEST) 151 ---help--- 152 Support for Allwinner A20/A31 GMAC ethernet controllers. 153 154 This selects Allwinner SoC glue layer support for the 155 stmmac device driver. This driver is used for A20/A31 156 GMAC ethernet controller. 157 158config DWMAC_SUN8I 159 tristate "Allwinner sun8i GMAC support" 160 default ARCH_SUNXI 161 depends on OF && (ARCH_SUNXI || COMPILE_TEST) 162 select MDIO_BUS_MUX 163 ---help--- 164 Support for Allwinner H3 A83T A64 EMAC ethernet controllers. 165 166 This selects Allwinner SoC glue layer support for the 167 stmmac device driver. This driver is used for H3/A83T/A64 168 EMAC ethernet controller. 169endif 170 171config STMMAC_PCI 172 tristate "STMMAC PCI bus support" 173 depends on STMMAC_ETH && PCI 174 ---help--- 175 This selects the platform specific bus support for the stmmac driver. 176 This driver was tested on XLINX XC2V3000 FF1152AMT0221 177 D1215994A VIRTEX FPGA board and SNPS QoS IPK Prototyping Kit. 178 179 If you have a controller with this interface, say Y or M here. 180 181 If unsure, say N. 182endif 183