1 /*************************************************************************** 2 * 3 * Copyright (C) 2004-2008 SMSC 4 * Copyright (C) 2005-2008 ARM 5 * 6 * This program is free software; you can redistribute it and/or 7 * modify it under the terms of the GNU General Public License 8 * as published by the Free Software Foundation; either version 2 9 * of the License, or (at your option) any later version. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 * GNU General Public License for more details. 15 * 16 * You should have received a copy of the GNU General Public License 17 * along with this program; if not, see <http://www.gnu.org/licenses/>. 18 * 19 *************************************************************************** 20 * Rewritten, heavily based on smsc911x simple driver by SMSC. 21 * Partly uses io macros from smc91x.c by Nicolas Pitre 22 * 23 * Supported devices: 24 * LAN9115, LAN9116, LAN9117, LAN9118 25 * LAN9215, LAN9216, LAN9217, LAN9218 26 * LAN9210, LAN9211 27 * LAN9220, LAN9221 28 * LAN89218 29 * 30 */ 31 32 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 33 34 #include <linux/crc32.h> 35 #include <linux/clk.h> 36 #include <linux/delay.h> 37 #include <linux/errno.h> 38 #include <linux/etherdevice.h> 39 #include <linux/ethtool.h> 40 #include <linux/init.h> 41 #include <linux/interrupt.h> 42 #include <linux/ioport.h> 43 #include <linux/kernel.h> 44 #include <linux/module.h> 45 #include <linux/netdevice.h> 46 #include <linux/platform_device.h> 47 #include <linux/regulator/consumer.h> 48 #include <linux/sched.h> 49 #include <linux/timer.h> 50 #include <linux/bug.h> 51 #include <linux/bitops.h> 52 #include <linux/irq.h> 53 #include <linux/io.h> 54 #include <linux/swab.h> 55 #include <linux/phy.h> 56 #include <linux/smsc911x.h> 57 #include <linux/device.h> 58 #include <linux/of.h> 59 #include <linux/of_device.h> 60 #include <linux/of_gpio.h> 61 #include <linux/of_net.h> 62 #include <linux/pm_runtime.h> 63 64 #include "smsc911x.h" 65 66 #define SMSC_CHIPNAME "smsc911x" 67 #define SMSC_MDIONAME "smsc911x-mdio" 68 #define SMSC_DRV_VERSION "2008-10-21" 69 70 MODULE_LICENSE("GPL"); 71 MODULE_VERSION(SMSC_DRV_VERSION); 72 MODULE_ALIAS("platform:smsc911x"); 73 74 #if USE_DEBUG > 0 75 static int debug = 16; 76 #else 77 static int debug = 3; 78 #endif 79 80 module_param(debug, int, 0); 81 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); 82 83 struct smsc911x_data; 84 85 struct smsc911x_ops { 86 u32 (*reg_read)(struct smsc911x_data *pdata, u32 reg); 87 void (*reg_write)(struct smsc911x_data *pdata, u32 reg, u32 val); 88 void (*rx_readfifo)(struct smsc911x_data *pdata, 89 unsigned int *buf, unsigned int wordcount); 90 void (*tx_writefifo)(struct smsc911x_data *pdata, 91 unsigned int *buf, unsigned int wordcount); 92 }; 93 94 #define SMSC911X_NUM_SUPPLIES 2 95 96 struct smsc911x_data { 97 void __iomem *ioaddr; 98 99 unsigned int idrev; 100 101 /* used to decide which workarounds apply */ 102 unsigned int generation; 103 104 /* device configuration (copied from platform_data during probe) */ 105 struct smsc911x_platform_config config; 106 107 /* This needs to be acquired before calling any of below: 108 * smsc911x_mac_read(), smsc911x_mac_write() 109 */ 110 spinlock_t mac_lock; 111 112 /* spinlock to ensure register accesses are serialised */ 113 spinlock_t dev_lock; 114 115 struct phy_device *phy_dev; 116 struct mii_bus *mii_bus; 117 int phy_irq[PHY_MAX_ADDR]; 118 unsigned int using_extphy; 119 int last_duplex; 120 int last_carrier; 121 122 u32 msg_enable; 123 unsigned int gpio_setting; 124 unsigned int gpio_orig_setting; 125 struct net_device *dev; 126 struct napi_struct napi; 127 128 unsigned int software_irq_signal; 129 130 #ifdef USE_PHY_WORK_AROUND 131 #define MIN_PACKET_SIZE (64) 132 char loopback_tx_pkt[MIN_PACKET_SIZE]; 133 char loopback_rx_pkt[MIN_PACKET_SIZE]; 134 unsigned int resetcount; 135 #endif 136 137 /* Members for Multicast filter workaround */ 138 unsigned int multicast_update_pending; 139 unsigned int set_bits_mask; 140 unsigned int clear_bits_mask; 141 unsigned int hashhi; 142 unsigned int hashlo; 143 144 /* register access functions */ 145 const struct smsc911x_ops *ops; 146 147 /* regulators */ 148 struct regulator_bulk_data supplies[SMSC911X_NUM_SUPPLIES]; 149 150 /* clock */ 151 struct clk *clk; 152 }; 153 154 /* Easy access to information */ 155 #define __smsc_shift(pdata, reg) ((reg) << ((pdata)->config.shift)) 156 157 static inline u32 __smsc911x_reg_read(struct smsc911x_data *pdata, u32 reg) 158 { 159 if (pdata->config.flags & SMSC911X_USE_32BIT) 160 return readl(pdata->ioaddr + reg); 161 162 if (pdata->config.flags & SMSC911X_USE_16BIT) 163 return ((readw(pdata->ioaddr + reg) & 0xFFFF) | 164 ((readw(pdata->ioaddr + reg + 2) & 0xFFFF) << 16)); 165 166 BUG(); 167 return 0; 168 } 169 170 static inline u32 171 __smsc911x_reg_read_shift(struct smsc911x_data *pdata, u32 reg) 172 { 173 if (pdata->config.flags & SMSC911X_USE_32BIT) 174 return readl(pdata->ioaddr + __smsc_shift(pdata, reg)); 175 176 if (pdata->config.flags & SMSC911X_USE_16BIT) 177 return (readw(pdata->ioaddr + 178 __smsc_shift(pdata, reg)) & 0xFFFF) | 179 ((readw(pdata->ioaddr + 180 __smsc_shift(pdata, reg + 2)) & 0xFFFF) << 16); 181 182 BUG(); 183 return 0; 184 } 185 186 static inline u32 smsc911x_reg_read(struct smsc911x_data *pdata, u32 reg) 187 { 188 u32 data; 189 unsigned long flags; 190 191 spin_lock_irqsave(&pdata->dev_lock, flags); 192 data = pdata->ops->reg_read(pdata, reg); 193 spin_unlock_irqrestore(&pdata->dev_lock, flags); 194 195 return data; 196 } 197 198 static inline void __smsc911x_reg_write(struct smsc911x_data *pdata, u32 reg, 199 u32 val) 200 { 201 if (pdata->config.flags & SMSC911X_USE_32BIT) { 202 writel(val, pdata->ioaddr + reg); 203 return; 204 } 205 206 if (pdata->config.flags & SMSC911X_USE_16BIT) { 207 writew(val & 0xFFFF, pdata->ioaddr + reg); 208 writew((val >> 16) & 0xFFFF, pdata->ioaddr + reg + 2); 209 return; 210 } 211 212 BUG(); 213 } 214 215 static inline void 216 __smsc911x_reg_write_shift(struct smsc911x_data *pdata, u32 reg, u32 val) 217 { 218 if (pdata->config.flags & SMSC911X_USE_32BIT) { 219 writel(val, pdata->ioaddr + __smsc_shift(pdata, reg)); 220 return; 221 } 222 223 if (pdata->config.flags & SMSC911X_USE_16BIT) { 224 writew(val & 0xFFFF, 225 pdata->ioaddr + __smsc_shift(pdata, reg)); 226 writew((val >> 16) & 0xFFFF, 227 pdata->ioaddr + __smsc_shift(pdata, reg + 2)); 228 return; 229 } 230 231 BUG(); 232 } 233 234 static inline void smsc911x_reg_write(struct smsc911x_data *pdata, u32 reg, 235 u32 val) 236 { 237 unsigned long flags; 238 239 spin_lock_irqsave(&pdata->dev_lock, flags); 240 pdata->ops->reg_write(pdata, reg, val); 241 spin_unlock_irqrestore(&pdata->dev_lock, flags); 242 } 243 244 /* Writes a packet to the TX_DATA_FIFO */ 245 static inline void 246 smsc911x_tx_writefifo(struct smsc911x_data *pdata, unsigned int *buf, 247 unsigned int wordcount) 248 { 249 unsigned long flags; 250 251 spin_lock_irqsave(&pdata->dev_lock, flags); 252 253 if (pdata->config.flags & SMSC911X_SWAP_FIFO) { 254 while (wordcount--) 255 __smsc911x_reg_write(pdata, TX_DATA_FIFO, 256 swab32(*buf++)); 257 goto out; 258 } 259 260 if (pdata->config.flags & SMSC911X_USE_32BIT) { 261 iowrite32_rep(pdata->ioaddr + TX_DATA_FIFO, buf, wordcount); 262 goto out; 263 } 264 265 if (pdata->config.flags & SMSC911X_USE_16BIT) { 266 while (wordcount--) 267 __smsc911x_reg_write(pdata, TX_DATA_FIFO, *buf++); 268 goto out; 269 } 270 271 BUG(); 272 out: 273 spin_unlock_irqrestore(&pdata->dev_lock, flags); 274 } 275 276 /* Writes a packet to the TX_DATA_FIFO - shifted version */ 277 static inline void 278 smsc911x_tx_writefifo_shift(struct smsc911x_data *pdata, unsigned int *buf, 279 unsigned int wordcount) 280 { 281 unsigned long flags; 282 283 spin_lock_irqsave(&pdata->dev_lock, flags); 284 285 if (pdata->config.flags & SMSC911X_SWAP_FIFO) { 286 while (wordcount--) 287 __smsc911x_reg_write_shift(pdata, TX_DATA_FIFO, 288 swab32(*buf++)); 289 goto out; 290 } 291 292 if (pdata->config.flags & SMSC911X_USE_32BIT) { 293 iowrite32_rep(pdata->ioaddr + __smsc_shift(pdata, 294 TX_DATA_FIFO), buf, wordcount); 295 goto out; 296 } 297 298 if (pdata->config.flags & SMSC911X_USE_16BIT) { 299 while (wordcount--) 300 __smsc911x_reg_write_shift(pdata, 301 TX_DATA_FIFO, *buf++); 302 goto out; 303 } 304 305 BUG(); 306 out: 307 spin_unlock_irqrestore(&pdata->dev_lock, flags); 308 } 309 310 /* Reads a packet out of the RX_DATA_FIFO */ 311 static inline void 312 smsc911x_rx_readfifo(struct smsc911x_data *pdata, unsigned int *buf, 313 unsigned int wordcount) 314 { 315 unsigned long flags; 316 317 spin_lock_irqsave(&pdata->dev_lock, flags); 318 319 if (pdata->config.flags & SMSC911X_SWAP_FIFO) { 320 while (wordcount--) 321 *buf++ = swab32(__smsc911x_reg_read(pdata, 322 RX_DATA_FIFO)); 323 goto out; 324 } 325 326 if (pdata->config.flags & SMSC911X_USE_32BIT) { 327 ioread32_rep(pdata->ioaddr + RX_DATA_FIFO, buf, wordcount); 328 goto out; 329 } 330 331 if (pdata->config.flags & SMSC911X_USE_16BIT) { 332 while (wordcount--) 333 *buf++ = __smsc911x_reg_read(pdata, RX_DATA_FIFO); 334 goto out; 335 } 336 337 BUG(); 338 out: 339 spin_unlock_irqrestore(&pdata->dev_lock, flags); 340 } 341 342 /* Reads a packet out of the RX_DATA_FIFO - shifted version */ 343 static inline void 344 smsc911x_rx_readfifo_shift(struct smsc911x_data *pdata, unsigned int *buf, 345 unsigned int wordcount) 346 { 347 unsigned long flags; 348 349 spin_lock_irqsave(&pdata->dev_lock, flags); 350 351 if (pdata->config.flags & SMSC911X_SWAP_FIFO) { 352 while (wordcount--) 353 *buf++ = swab32(__smsc911x_reg_read_shift(pdata, 354 RX_DATA_FIFO)); 355 goto out; 356 } 357 358 if (pdata->config.flags & SMSC911X_USE_32BIT) { 359 ioread32_rep(pdata->ioaddr + __smsc_shift(pdata, 360 RX_DATA_FIFO), buf, wordcount); 361 goto out; 362 } 363 364 if (pdata->config.flags & SMSC911X_USE_16BIT) { 365 while (wordcount--) 366 *buf++ = __smsc911x_reg_read_shift(pdata, 367 RX_DATA_FIFO); 368 goto out; 369 } 370 371 BUG(); 372 out: 373 spin_unlock_irqrestore(&pdata->dev_lock, flags); 374 } 375 376 /* 377 * enable regulator and clock resources. 378 */ 379 static int smsc911x_enable_resources(struct platform_device *pdev) 380 { 381 struct net_device *ndev = platform_get_drvdata(pdev); 382 struct smsc911x_data *pdata = netdev_priv(ndev); 383 int ret = 0; 384 385 ret = regulator_bulk_enable(ARRAY_SIZE(pdata->supplies), 386 pdata->supplies); 387 if (ret) 388 netdev_err(ndev, "failed to enable regulators %d\n", 389 ret); 390 391 if (!IS_ERR(pdata->clk)) { 392 ret = clk_prepare_enable(pdata->clk); 393 if (ret < 0) 394 netdev_err(ndev, "failed to enable clock %d\n", ret); 395 } 396 397 return ret; 398 } 399 400 /* 401 * disable resources, currently just regulators. 402 */ 403 static int smsc911x_disable_resources(struct platform_device *pdev) 404 { 405 struct net_device *ndev = platform_get_drvdata(pdev); 406 struct smsc911x_data *pdata = netdev_priv(ndev); 407 int ret = 0; 408 409 ret = regulator_bulk_disable(ARRAY_SIZE(pdata->supplies), 410 pdata->supplies); 411 412 if (!IS_ERR(pdata->clk)) 413 clk_disable_unprepare(pdata->clk); 414 415 return ret; 416 } 417 418 /* 419 * Request resources, currently just regulators. 420 * 421 * The SMSC911x has two power pins: vddvario and vdd33a, in designs where 422 * these are not always-on we need to request regulators to be turned on 423 * before we can try to access the device registers. 424 */ 425 static int smsc911x_request_resources(struct platform_device *pdev) 426 { 427 struct net_device *ndev = platform_get_drvdata(pdev); 428 struct smsc911x_data *pdata = netdev_priv(ndev); 429 int ret = 0; 430 431 /* Request regulators */ 432 pdata->supplies[0].supply = "vdd33a"; 433 pdata->supplies[1].supply = "vddvario"; 434 ret = regulator_bulk_get(&pdev->dev, 435 ARRAY_SIZE(pdata->supplies), 436 pdata->supplies); 437 if (ret) 438 netdev_err(ndev, "couldn't get regulators %d\n", 439 ret); 440 441 /* Request clock */ 442 pdata->clk = clk_get(&pdev->dev, NULL); 443 if (IS_ERR(pdata->clk)) 444 dev_dbg(&pdev->dev, "couldn't get clock %li\n", 445 PTR_ERR(pdata->clk)); 446 447 return ret; 448 } 449 450 /* 451 * Free resources, currently just regulators. 452 * 453 */ 454 static void smsc911x_free_resources(struct platform_device *pdev) 455 { 456 struct net_device *ndev = platform_get_drvdata(pdev); 457 struct smsc911x_data *pdata = netdev_priv(ndev); 458 459 /* Free regulators */ 460 regulator_bulk_free(ARRAY_SIZE(pdata->supplies), 461 pdata->supplies); 462 463 /* Free clock */ 464 if (!IS_ERR(pdata->clk)) { 465 clk_put(pdata->clk); 466 pdata->clk = NULL; 467 } 468 } 469 470 /* waits for MAC not busy, with timeout. Only called by smsc911x_mac_read 471 * and smsc911x_mac_write, so assumes mac_lock is held */ 472 static int smsc911x_mac_complete(struct smsc911x_data *pdata) 473 { 474 int i; 475 u32 val; 476 477 SMSC_ASSERT_MAC_LOCK(pdata); 478 479 for (i = 0; i < 40; i++) { 480 val = smsc911x_reg_read(pdata, MAC_CSR_CMD); 481 if (!(val & MAC_CSR_CMD_CSR_BUSY_)) 482 return 0; 483 } 484 SMSC_WARN(pdata, hw, "Timed out waiting for MAC not BUSY. " 485 "MAC_CSR_CMD: 0x%08X", val); 486 return -EIO; 487 } 488 489 /* Fetches a MAC register value. Assumes mac_lock is acquired */ 490 static u32 smsc911x_mac_read(struct smsc911x_data *pdata, unsigned int offset) 491 { 492 unsigned int temp; 493 494 SMSC_ASSERT_MAC_LOCK(pdata); 495 496 temp = smsc911x_reg_read(pdata, MAC_CSR_CMD); 497 if (unlikely(temp & MAC_CSR_CMD_CSR_BUSY_)) { 498 SMSC_WARN(pdata, hw, "MAC busy at entry"); 499 return 0xFFFFFFFF; 500 } 501 502 /* Send the MAC cmd */ 503 smsc911x_reg_write(pdata, MAC_CSR_CMD, ((offset & 0xFF) | 504 MAC_CSR_CMD_CSR_BUSY_ | MAC_CSR_CMD_R_NOT_W_)); 505 506 /* Workaround for hardware read-after-write restriction */ 507 temp = smsc911x_reg_read(pdata, BYTE_TEST); 508 509 /* Wait for the read to complete */ 510 if (likely(smsc911x_mac_complete(pdata) == 0)) 511 return smsc911x_reg_read(pdata, MAC_CSR_DATA); 512 513 SMSC_WARN(pdata, hw, "MAC busy after read"); 514 return 0xFFFFFFFF; 515 } 516 517 /* Set a mac register, mac_lock must be acquired before calling */ 518 static void smsc911x_mac_write(struct smsc911x_data *pdata, 519 unsigned int offset, u32 val) 520 { 521 unsigned int temp; 522 523 SMSC_ASSERT_MAC_LOCK(pdata); 524 525 temp = smsc911x_reg_read(pdata, MAC_CSR_CMD); 526 if (unlikely(temp & MAC_CSR_CMD_CSR_BUSY_)) { 527 SMSC_WARN(pdata, hw, 528 "smsc911x_mac_write failed, MAC busy at entry"); 529 return; 530 } 531 532 /* Send data to write */ 533 smsc911x_reg_write(pdata, MAC_CSR_DATA, val); 534 535 /* Write the actual data */ 536 smsc911x_reg_write(pdata, MAC_CSR_CMD, ((offset & 0xFF) | 537 MAC_CSR_CMD_CSR_BUSY_)); 538 539 /* Workaround for hardware read-after-write restriction */ 540 temp = smsc911x_reg_read(pdata, BYTE_TEST); 541 542 /* Wait for the write to complete */ 543 if (likely(smsc911x_mac_complete(pdata) == 0)) 544 return; 545 546 SMSC_WARN(pdata, hw, "smsc911x_mac_write failed, MAC busy after write"); 547 } 548 549 /* Get a phy register */ 550 static int smsc911x_mii_read(struct mii_bus *bus, int phyaddr, int regidx) 551 { 552 struct smsc911x_data *pdata = (struct smsc911x_data *)bus->priv; 553 unsigned long flags; 554 unsigned int addr; 555 int i, reg; 556 557 spin_lock_irqsave(&pdata->mac_lock, flags); 558 559 /* Confirm MII not busy */ 560 if (unlikely(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) { 561 SMSC_WARN(pdata, hw, "MII is busy in smsc911x_mii_read???"); 562 reg = -EIO; 563 goto out; 564 } 565 566 /* Set the address, index & direction (read from PHY) */ 567 addr = ((phyaddr & 0x1F) << 11) | ((regidx & 0x1F) << 6); 568 smsc911x_mac_write(pdata, MII_ACC, addr); 569 570 /* Wait for read to complete w/ timeout */ 571 for (i = 0; i < 100; i++) 572 if (!(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) { 573 reg = smsc911x_mac_read(pdata, MII_DATA); 574 goto out; 575 } 576 577 SMSC_WARN(pdata, hw, "Timed out waiting for MII read to finish"); 578 reg = -EIO; 579 580 out: 581 spin_unlock_irqrestore(&pdata->mac_lock, flags); 582 return reg; 583 } 584 585 /* Set a phy register */ 586 static int smsc911x_mii_write(struct mii_bus *bus, int phyaddr, int regidx, 587 u16 val) 588 { 589 struct smsc911x_data *pdata = (struct smsc911x_data *)bus->priv; 590 unsigned long flags; 591 unsigned int addr; 592 int i, reg; 593 594 spin_lock_irqsave(&pdata->mac_lock, flags); 595 596 /* Confirm MII not busy */ 597 if (unlikely(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) { 598 SMSC_WARN(pdata, hw, "MII is busy in smsc911x_mii_write???"); 599 reg = -EIO; 600 goto out; 601 } 602 603 /* Put the data to write in the MAC */ 604 smsc911x_mac_write(pdata, MII_DATA, val); 605 606 /* Set the address, index & direction (write to PHY) */ 607 addr = ((phyaddr & 0x1F) << 11) | ((regidx & 0x1F) << 6) | 608 MII_ACC_MII_WRITE_; 609 smsc911x_mac_write(pdata, MII_ACC, addr); 610 611 /* Wait for write to complete w/ timeout */ 612 for (i = 0; i < 100; i++) 613 if (!(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) { 614 reg = 0; 615 goto out; 616 } 617 618 SMSC_WARN(pdata, hw, "Timed out waiting for MII write to finish"); 619 reg = -EIO; 620 621 out: 622 spin_unlock_irqrestore(&pdata->mac_lock, flags); 623 return reg; 624 } 625 626 /* Switch to external phy. Assumes tx and rx are stopped. */ 627 static void smsc911x_phy_enable_external(struct smsc911x_data *pdata) 628 { 629 unsigned int hwcfg = smsc911x_reg_read(pdata, HW_CFG); 630 631 /* Disable phy clocks to the MAC */ 632 hwcfg &= (~HW_CFG_PHY_CLK_SEL_); 633 hwcfg |= HW_CFG_PHY_CLK_SEL_CLK_DIS_; 634 smsc911x_reg_write(pdata, HW_CFG, hwcfg); 635 udelay(10); /* Enough time for clocks to stop */ 636 637 /* Switch to external phy */ 638 hwcfg |= HW_CFG_EXT_PHY_EN_; 639 smsc911x_reg_write(pdata, HW_CFG, hwcfg); 640 641 /* Enable phy clocks to the MAC */ 642 hwcfg &= (~HW_CFG_PHY_CLK_SEL_); 643 hwcfg |= HW_CFG_PHY_CLK_SEL_EXT_PHY_; 644 smsc911x_reg_write(pdata, HW_CFG, hwcfg); 645 udelay(10); /* Enough time for clocks to restart */ 646 647 hwcfg |= HW_CFG_SMI_SEL_; 648 smsc911x_reg_write(pdata, HW_CFG, hwcfg); 649 } 650 651 /* Autodetects and enables external phy if present on supported chips. 652 * autodetection can be overridden by specifying SMSC911X_FORCE_INTERNAL_PHY 653 * or SMSC911X_FORCE_EXTERNAL_PHY in the platform_data flags. */ 654 static void smsc911x_phy_initialise_external(struct smsc911x_data *pdata) 655 { 656 unsigned int hwcfg = smsc911x_reg_read(pdata, HW_CFG); 657 658 if (pdata->config.flags & SMSC911X_FORCE_INTERNAL_PHY) { 659 SMSC_TRACE(pdata, hw, "Forcing internal PHY"); 660 pdata->using_extphy = 0; 661 } else if (pdata->config.flags & SMSC911X_FORCE_EXTERNAL_PHY) { 662 SMSC_TRACE(pdata, hw, "Forcing external PHY"); 663 smsc911x_phy_enable_external(pdata); 664 pdata->using_extphy = 1; 665 } else if (hwcfg & HW_CFG_EXT_PHY_DET_) { 666 SMSC_TRACE(pdata, hw, 667 "HW_CFG EXT_PHY_DET set, using external PHY"); 668 smsc911x_phy_enable_external(pdata); 669 pdata->using_extphy = 1; 670 } else { 671 SMSC_TRACE(pdata, hw, 672 "HW_CFG EXT_PHY_DET clear, using internal PHY"); 673 pdata->using_extphy = 0; 674 } 675 } 676 677 /* Fetches a tx status out of the status fifo */ 678 static unsigned int smsc911x_tx_get_txstatus(struct smsc911x_data *pdata) 679 { 680 unsigned int result = 681 smsc911x_reg_read(pdata, TX_FIFO_INF) & TX_FIFO_INF_TSUSED_; 682 683 if (result != 0) 684 result = smsc911x_reg_read(pdata, TX_STATUS_FIFO); 685 686 return result; 687 } 688 689 /* Fetches the next rx status */ 690 static unsigned int smsc911x_rx_get_rxstatus(struct smsc911x_data *pdata) 691 { 692 unsigned int result = 693 smsc911x_reg_read(pdata, RX_FIFO_INF) & RX_FIFO_INF_RXSUSED_; 694 695 if (result != 0) 696 result = smsc911x_reg_read(pdata, RX_STATUS_FIFO); 697 698 return result; 699 } 700 701 #ifdef USE_PHY_WORK_AROUND 702 static int smsc911x_phy_check_loopbackpkt(struct smsc911x_data *pdata) 703 { 704 unsigned int tries; 705 u32 wrsz; 706 u32 rdsz; 707 ulong bufp; 708 709 for (tries = 0; tries < 10; tries++) { 710 unsigned int txcmd_a; 711 unsigned int txcmd_b; 712 unsigned int status; 713 unsigned int pktlength; 714 unsigned int i; 715 716 /* Zero-out rx packet memory */ 717 memset(pdata->loopback_rx_pkt, 0, MIN_PACKET_SIZE); 718 719 /* Write tx packet to 118 */ 720 txcmd_a = (u32)((ulong)pdata->loopback_tx_pkt & 0x03) << 16; 721 txcmd_a |= TX_CMD_A_FIRST_SEG_ | TX_CMD_A_LAST_SEG_; 722 txcmd_a |= MIN_PACKET_SIZE; 723 724 txcmd_b = MIN_PACKET_SIZE << 16 | MIN_PACKET_SIZE; 725 726 smsc911x_reg_write(pdata, TX_DATA_FIFO, txcmd_a); 727 smsc911x_reg_write(pdata, TX_DATA_FIFO, txcmd_b); 728 729 bufp = (ulong)pdata->loopback_tx_pkt & (~0x3); 730 wrsz = MIN_PACKET_SIZE + 3; 731 wrsz += (u32)((ulong)pdata->loopback_tx_pkt & 0x3); 732 wrsz >>= 2; 733 734 pdata->ops->tx_writefifo(pdata, (unsigned int *)bufp, wrsz); 735 736 /* Wait till transmit is done */ 737 i = 60; 738 do { 739 udelay(5); 740 status = smsc911x_tx_get_txstatus(pdata); 741 } while ((i--) && (!status)); 742 743 if (!status) { 744 SMSC_WARN(pdata, hw, 745 "Failed to transmit during loopback test"); 746 continue; 747 } 748 if (status & TX_STS_ES_) { 749 SMSC_WARN(pdata, hw, 750 "Transmit encountered errors during loopback test"); 751 continue; 752 } 753 754 /* Wait till receive is done */ 755 i = 60; 756 do { 757 udelay(5); 758 status = smsc911x_rx_get_rxstatus(pdata); 759 } while ((i--) && (!status)); 760 761 if (!status) { 762 SMSC_WARN(pdata, hw, 763 "Failed to receive during loopback test"); 764 continue; 765 } 766 if (status & RX_STS_ES_) { 767 SMSC_WARN(pdata, hw, 768 "Receive encountered errors during loopback test"); 769 continue; 770 } 771 772 pktlength = ((status & 0x3FFF0000UL) >> 16); 773 bufp = (ulong)pdata->loopback_rx_pkt; 774 rdsz = pktlength + 3; 775 rdsz += (u32)((ulong)pdata->loopback_rx_pkt & 0x3); 776 rdsz >>= 2; 777 778 pdata->ops->rx_readfifo(pdata, (unsigned int *)bufp, rdsz); 779 780 if (pktlength != (MIN_PACKET_SIZE + 4)) { 781 SMSC_WARN(pdata, hw, "Unexpected packet size " 782 "during loop back test, size=%d, will retry", 783 pktlength); 784 } else { 785 unsigned int j; 786 int mismatch = 0; 787 for (j = 0; j < MIN_PACKET_SIZE; j++) { 788 if (pdata->loopback_tx_pkt[j] 789 != pdata->loopback_rx_pkt[j]) { 790 mismatch = 1; 791 break; 792 } 793 } 794 if (!mismatch) { 795 SMSC_TRACE(pdata, hw, "Successfully verified " 796 "loopback packet"); 797 return 0; 798 } else { 799 SMSC_WARN(pdata, hw, "Data mismatch " 800 "during loop back test, will retry"); 801 } 802 } 803 } 804 805 return -EIO; 806 } 807 808 static int smsc911x_phy_reset(struct smsc911x_data *pdata) 809 { 810 struct phy_device *phy_dev = pdata->phy_dev; 811 unsigned int temp; 812 unsigned int i = 100000; 813 814 BUG_ON(!phy_dev); 815 BUG_ON(!phy_dev->bus); 816 817 SMSC_TRACE(pdata, hw, "Performing PHY BCR Reset"); 818 smsc911x_mii_write(phy_dev->bus, phy_dev->addr, MII_BMCR, BMCR_RESET); 819 do { 820 msleep(1); 821 temp = smsc911x_mii_read(phy_dev->bus, phy_dev->addr, 822 MII_BMCR); 823 } while ((i--) && (temp & BMCR_RESET)); 824 825 if (temp & BMCR_RESET) { 826 SMSC_WARN(pdata, hw, "PHY reset failed to complete"); 827 return -EIO; 828 } 829 /* Extra delay required because the phy may not be completed with 830 * its reset when BMCR_RESET is cleared. Specs say 256 uS is 831 * enough delay but using 1ms here to be safe */ 832 msleep(1); 833 834 return 0; 835 } 836 837 static int smsc911x_phy_loopbacktest(struct net_device *dev) 838 { 839 struct smsc911x_data *pdata = netdev_priv(dev); 840 struct phy_device *phy_dev = pdata->phy_dev; 841 int result = -EIO; 842 unsigned int i, val; 843 unsigned long flags; 844 845 /* Initialise tx packet using broadcast destination address */ 846 memset(pdata->loopback_tx_pkt, 0xff, ETH_ALEN); 847 848 /* Use incrementing source address */ 849 for (i = 6; i < 12; i++) 850 pdata->loopback_tx_pkt[i] = (char)i; 851 852 /* Set length type field */ 853 pdata->loopback_tx_pkt[12] = 0x00; 854 pdata->loopback_tx_pkt[13] = 0x00; 855 856 for (i = 14; i < MIN_PACKET_SIZE; i++) 857 pdata->loopback_tx_pkt[i] = (char)i; 858 859 val = smsc911x_reg_read(pdata, HW_CFG); 860 val &= HW_CFG_TX_FIF_SZ_; 861 val |= HW_CFG_SF_; 862 smsc911x_reg_write(pdata, HW_CFG, val); 863 864 smsc911x_reg_write(pdata, TX_CFG, TX_CFG_TX_ON_); 865 smsc911x_reg_write(pdata, RX_CFG, 866 (u32)((ulong)pdata->loopback_rx_pkt & 0x03) << 8); 867 868 for (i = 0; i < 10; i++) { 869 /* Set PHY to 10/FD, no ANEG, and loopback mode */ 870 smsc911x_mii_write(phy_dev->bus, phy_dev->addr, MII_BMCR, 871 BMCR_LOOPBACK | BMCR_FULLDPLX); 872 873 /* Enable MAC tx/rx, FD */ 874 spin_lock_irqsave(&pdata->mac_lock, flags); 875 smsc911x_mac_write(pdata, MAC_CR, MAC_CR_FDPX_ 876 | MAC_CR_TXEN_ | MAC_CR_RXEN_); 877 spin_unlock_irqrestore(&pdata->mac_lock, flags); 878 879 if (smsc911x_phy_check_loopbackpkt(pdata) == 0) { 880 result = 0; 881 break; 882 } 883 pdata->resetcount++; 884 885 /* Disable MAC rx */ 886 spin_lock_irqsave(&pdata->mac_lock, flags); 887 smsc911x_mac_write(pdata, MAC_CR, 0); 888 spin_unlock_irqrestore(&pdata->mac_lock, flags); 889 890 smsc911x_phy_reset(pdata); 891 } 892 893 /* Disable MAC */ 894 spin_lock_irqsave(&pdata->mac_lock, flags); 895 smsc911x_mac_write(pdata, MAC_CR, 0); 896 spin_unlock_irqrestore(&pdata->mac_lock, flags); 897 898 /* Cancel PHY loopback mode */ 899 smsc911x_mii_write(phy_dev->bus, phy_dev->addr, MII_BMCR, 0); 900 901 smsc911x_reg_write(pdata, TX_CFG, 0); 902 smsc911x_reg_write(pdata, RX_CFG, 0); 903 904 return result; 905 } 906 #endif /* USE_PHY_WORK_AROUND */ 907 908 static void smsc911x_phy_update_flowcontrol(struct smsc911x_data *pdata) 909 { 910 struct phy_device *phy_dev = pdata->phy_dev; 911 u32 afc = smsc911x_reg_read(pdata, AFC_CFG); 912 u32 flow; 913 unsigned long flags; 914 915 if (phy_dev->duplex == DUPLEX_FULL) { 916 u16 lcladv = phy_read(phy_dev, MII_ADVERTISE); 917 u16 rmtadv = phy_read(phy_dev, MII_LPA); 918 u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv); 919 920 if (cap & FLOW_CTRL_RX) 921 flow = 0xFFFF0002; 922 else 923 flow = 0; 924 925 if (cap & FLOW_CTRL_TX) 926 afc |= 0xF; 927 else 928 afc &= ~0xF; 929 930 SMSC_TRACE(pdata, hw, "rx pause %s, tx pause %s", 931 (cap & FLOW_CTRL_RX ? "enabled" : "disabled"), 932 (cap & FLOW_CTRL_TX ? "enabled" : "disabled")); 933 } else { 934 SMSC_TRACE(pdata, hw, "half duplex"); 935 flow = 0; 936 afc |= 0xF; 937 } 938 939 spin_lock_irqsave(&pdata->mac_lock, flags); 940 smsc911x_mac_write(pdata, FLOW, flow); 941 spin_unlock_irqrestore(&pdata->mac_lock, flags); 942 943 smsc911x_reg_write(pdata, AFC_CFG, afc); 944 } 945 946 /* Update link mode if anything has changed. Called periodically when the 947 * PHY is in polling mode, even if nothing has changed. */ 948 static void smsc911x_phy_adjust_link(struct net_device *dev) 949 { 950 struct smsc911x_data *pdata = netdev_priv(dev); 951 struct phy_device *phy_dev = pdata->phy_dev; 952 unsigned long flags; 953 int carrier; 954 955 if (phy_dev->duplex != pdata->last_duplex) { 956 unsigned int mac_cr; 957 SMSC_TRACE(pdata, hw, "duplex state has changed"); 958 959 spin_lock_irqsave(&pdata->mac_lock, flags); 960 mac_cr = smsc911x_mac_read(pdata, MAC_CR); 961 if (phy_dev->duplex) { 962 SMSC_TRACE(pdata, hw, 963 "configuring for full duplex mode"); 964 mac_cr |= MAC_CR_FDPX_; 965 } else { 966 SMSC_TRACE(pdata, hw, 967 "configuring for half duplex mode"); 968 mac_cr &= ~MAC_CR_FDPX_; 969 } 970 smsc911x_mac_write(pdata, MAC_CR, mac_cr); 971 spin_unlock_irqrestore(&pdata->mac_lock, flags); 972 973 smsc911x_phy_update_flowcontrol(pdata); 974 pdata->last_duplex = phy_dev->duplex; 975 } 976 977 carrier = netif_carrier_ok(dev); 978 if (carrier != pdata->last_carrier) { 979 SMSC_TRACE(pdata, hw, "carrier state has changed"); 980 if (carrier) { 981 SMSC_TRACE(pdata, hw, "configuring for carrier OK"); 982 if ((pdata->gpio_orig_setting & GPIO_CFG_LED1_EN_) && 983 (!pdata->using_extphy)) { 984 /* Restore original GPIO configuration */ 985 pdata->gpio_setting = pdata->gpio_orig_setting; 986 smsc911x_reg_write(pdata, GPIO_CFG, 987 pdata->gpio_setting); 988 } 989 } else { 990 SMSC_TRACE(pdata, hw, "configuring for no carrier"); 991 /* Check global setting that LED1 992 * usage is 10/100 indicator */ 993 pdata->gpio_setting = smsc911x_reg_read(pdata, 994 GPIO_CFG); 995 if ((pdata->gpio_setting & GPIO_CFG_LED1_EN_) && 996 (!pdata->using_extphy)) { 997 /* Force 10/100 LED off, after saving 998 * original GPIO configuration */ 999 pdata->gpio_orig_setting = pdata->gpio_setting; 1000 1001 pdata->gpio_setting &= ~GPIO_CFG_LED1_EN_; 1002 pdata->gpio_setting |= (GPIO_CFG_GPIOBUF0_ 1003 | GPIO_CFG_GPIODIR0_ 1004 | GPIO_CFG_GPIOD0_); 1005 smsc911x_reg_write(pdata, GPIO_CFG, 1006 pdata->gpio_setting); 1007 } 1008 } 1009 pdata->last_carrier = carrier; 1010 } 1011 } 1012 1013 static int smsc911x_mii_probe(struct net_device *dev) 1014 { 1015 struct smsc911x_data *pdata = netdev_priv(dev); 1016 struct phy_device *phydev = NULL; 1017 int ret; 1018 1019 /* find the first phy */ 1020 phydev = phy_find_first(pdata->mii_bus); 1021 if (!phydev) { 1022 netdev_err(dev, "no PHY found\n"); 1023 return -ENODEV; 1024 } 1025 1026 SMSC_TRACE(pdata, probe, "PHY: addr %d, phy_id 0x%08X", 1027 phydev->addr, phydev->phy_id); 1028 1029 ret = phy_connect_direct(dev, phydev, &smsc911x_phy_adjust_link, 1030 pdata->config.phy_interface); 1031 1032 if (ret) { 1033 netdev_err(dev, "Could not attach to PHY\n"); 1034 return ret; 1035 } 1036 1037 netdev_info(dev, 1038 "attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n", 1039 phydev->drv->name, dev_name(&phydev->dev), phydev->irq); 1040 1041 /* mask with MAC supported features */ 1042 phydev->supported &= (PHY_BASIC_FEATURES | SUPPORTED_Pause | 1043 SUPPORTED_Asym_Pause); 1044 phydev->advertising = phydev->supported; 1045 1046 pdata->phy_dev = phydev; 1047 pdata->last_duplex = -1; 1048 pdata->last_carrier = -1; 1049 1050 #ifdef USE_PHY_WORK_AROUND 1051 if (smsc911x_phy_loopbacktest(dev) < 0) { 1052 SMSC_WARN(pdata, hw, "Failed Loop Back Test"); 1053 return -ENODEV; 1054 } 1055 SMSC_TRACE(pdata, hw, "Passed Loop Back Test"); 1056 #endif /* USE_PHY_WORK_AROUND */ 1057 1058 SMSC_TRACE(pdata, hw, "phy initialised successfully"); 1059 return 0; 1060 } 1061 1062 static int smsc911x_mii_init(struct platform_device *pdev, 1063 struct net_device *dev) 1064 { 1065 struct smsc911x_data *pdata = netdev_priv(dev); 1066 int err = -ENXIO, i; 1067 1068 pdata->mii_bus = mdiobus_alloc(); 1069 if (!pdata->mii_bus) { 1070 err = -ENOMEM; 1071 goto err_out_1; 1072 } 1073 1074 pdata->mii_bus->name = SMSC_MDIONAME; 1075 snprintf(pdata->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x", 1076 pdev->name, pdev->id); 1077 pdata->mii_bus->priv = pdata; 1078 pdata->mii_bus->read = smsc911x_mii_read; 1079 pdata->mii_bus->write = smsc911x_mii_write; 1080 pdata->mii_bus->irq = pdata->phy_irq; 1081 for (i = 0; i < PHY_MAX_ADDR; ++i) 1082 pdata->mii_bus->irq[i] = PHY_POLL; 1083 1084 pdata->mii_bus->parent = &pdev->dev; 1085 1086 switch (pdata->idrev & 0xFFFF0000) { 1087 case 0x01170000: 1088 case 0x01150000: 1089 case 0x117A0000: 1090 case 0x115A0000: 1091 /* External PHY supported, try to autodetect */ 1092 smsc911x_phy_initialise_external(pdata); 1093 break; 1094 default: 1095 SMSC_TRACE(pdata, hw, "External PHY is not supported, " 1096 "using internal PHY"); 1097 pdata->using_extphy = 0; 1098 break; 1099 } 1100 1101 if (!pdata->using_extphy) { 1102 /* Mask all PHYs except ID 1 (internal) */ 1103 pdata->mii_bus->phy_mask = ~(1 << 1); 1104 } 1105 1106 if (mdiobus_register(pdata->mii_bus)) { 1107 SMSC_WARN(pdata, probe, "Error registering mii bus"); 1108 goto err_out_free_bus_2; 1109 } 1110 1111 if (smsc911x_mii_probe(dev) < 0) { 1112 SMSC_WARN(pdata, probe, "Error registering mii bus"); 1113 goto err_out_unregister_bus_3; 1114 } 1115 1116 return 0; 1117 1118 err_out_unregister_bus_3: 1119 mdiobus_unregister(pdata->mii_bus); 1120 err_out_free_bus_2: 1121 mdiobus_free(pdata->mii_bus); 1122 err_out_1: 1123 return err; 1124 } 1125 1126 /* Gets the number of tx statuses in the fifo */ 1127 static unsigned int smsc911x_tx_get_txstatcount(struct smsc911x_data *pdata) 1128 { 1129 return (smsc911x_reg_read(pdata, TX_FIFO_INF) 1130 & TX_FIFO_INF_TSUSED_) >> 16; 1131 } 1132 1133 /* Reads tx statuses and increments counters where necessary */ 1134 static void smsc911x_tx_update_txcounters(struct net_device *dev) 1135 { 1136 struct smsc911x_data *pdata = netdev_priv(dev); 1137 unsigned int tx_stat; 1138 1139 while ((tx_stat = smsc911x_tx_get_txstatus(pdata)) != 0) { 1140 if (unlikely(tx_stat & 0x80000000)) { 1141 /* In this driver the packet tag is used as the packet 1142 * length. Since a packet length can never reach the 1143 * size of 0x8000, this bit is reserved. It is worth 1144 * noting that the "reserved bit" in the warning above 1145 * does not reference a hardware defined reserved bit 1146 * but rather a driver defined one. 1147 */ 1148 SMSC_WARN(pdata, hw, "Packet tag reserved bit is high"); 1149 } else { 1150 if (unlikely(tx_stat & TX_STS_ES_)) { 1151 dev->stats.tx_errors++; 1152 } else { 1153 dev->stats.tx_packets++; 1154 dev->stats.tx_bytes += (tx_stat >> 16); 1155 } 1156 if (unlikely(tx_stat & TX_STS_EXCESS_COL_)) { 1157 dev->stats.collisions += 16; 1158 dev->stats.tx_aborted_errors += 1; 1159 } else { 1160 dev->stats.collisions += 1161 ((tx_stat >> 3) & 0xF); 1162 } 1163 if (unlikely(tx_stat & TX_STS_LOST_CARRIER_)) 1164 dev->stats.tx_carrier_errors += 1; 1165 if (unlikely(tx_stat & TX_STS_LATE_COL_)) { 1166 dev->stats.collisions++; 1167 dev->stats.tx_aborted_errors++; 1168 } 1169 } 1170 } 1171 } 1172 1173 /* Increments the Rx error counters */ 1174 static void 1175 smsc911x_rx_counterrors(struct net_device *dev, unsigned int rxstat) 1176 { 1177 int crc_err = 0; 1178 1179 if (unlikely(rxstat & RX_STS_ES_)) { 1180 dev->stats.rx_errors++; 1181 if (unlikely(rxstat & RX_STS_CRC_ERR_)) { 1182 dev->stats.rx_crc_errors++; 1183 crc_err = 1; 1184 } 1185 } 1186 if (likely(!crc_err)) { 1187 if (unlikely((rxstat & RX_STS_FRAME_TYPE_) && 1188 (rxstat & RX_STS_LENGTH_ERR_))) 1189 dev->stats.rx_length_errors++; 1190 if (rxstat & RX_STS_MCAST_) 1191 dev->stats.multicast++; 1192 } 1193 } 1194 1195 /* Quickly dumps bad packets */ 1196 static void 1197 smsc911x_rx_fastforward(struct smsc911x_data *pdata, unsigned int pktwords) 1198 { 1199 if (likely(pktwords >= 4)) { 1200 unsigned int timeout = 500; 1201 unsigned int val; 1202 smsc911x_reg_write(pdata, RX_DP_CTRL, RX_DP_CTRL_RX_FFWD_); 1203 do { 1204 udelay(1); 1205 val = smsc911x_reg_read(pdata, RX_DP_CTRL); 1206 } while ((val & RX_DP_CTRL_RX_FFWD_) && --timeout); 1207 1208 if (unlikely(timeout == 0)) 1209 SMSC_WARN(pdata, hw, "Timed out waiting for " 1210 "RX FFWD to finish, RX_DP_CTRL: 0x%08X", val); 1211 } else { 1212 unsigned int temp; 1213 while (pktwords--) 1214 temp = smsc911x_reg_read(pdata, RX_DATA_FIFO); 1215 } 1216 } 1217 1218 /* NAPI poll function */ 1219 static int smsc911x_poll(struct napi_struct *napi, int budget) 1220 { 1221 struct smsc911x_data *pdata = 1222 container_of(napi, struct smsc911x_data, napi); 1223 struct net_device *dev = pdata->dev; 1224 int npackets = 0; 1225 1226 while (npackets < budget) { 1227 unsigned int pktlength; 1228 unsigned int pktwords; 1229 struct sk_buff *skb; 1230 unsigned int rxstat = smsc911x_rx_get_rxstatus(pdata); 1231 1232 if (!rxstat) { 1233 unsigned int temp; 1234 /* We processed all packets available. Tell NAPI it can 1235 * stop polling then re-enable rx interrupts */ 1236 smsc911x_reg_write(pdata, INT_STS, INT_STS_RSFL_); 1237 napi_complete(napi); 1238 temp = smsc911x_reg_read(pdata, INT_EN); 1239 temp |= INT_EN_RSFL_EN_; 1240 smsc911x_reg_write(pdata, INT_EN, temp); 1241 break; 1242 } 1243 1244 /* Count packet for NAPI scheduling, even if it has an error. 1245 * Error packets still require cycles to discard */ 1246 npackets++; 1247 1248 pktlength = ((rxstat & 0x3FFF0000) >> 16); 1249 pktwords = (pktlength + NET_IP_ALIGN + 3) >> 2; 1250 smsc911x_rx_counterrors(dev, rxstat); 1251 1252 if (unlikely(rxstat & RX_STS_ES_)) { 1253 SMSC_WARN(pdata, rx_err, 1254 "Discarding packet with error bit set"); 1255 /* Packet has an error, discard it and continue with 1256 * the next */ 1257 smsc911x_rx_fastforward(pdata, pktwords); 1258 dev->stats.rx_dropped++; 1259 continue; 1260 } 1261 1262 skb = netdev_alloc_skb(dev, pktwords << 2); 1263 if (unlikely(!skb)) { 1264 SMSC_WARN(pdata, rx_err, 1265 "Unable to allocate skb for rx packet"); 1266 /* Drop the packet and stop this polling iteration */ 1267 smsc911x_rx_fastforward(pdata, pktwords); 1268 dev->stats.rx_dropped++; 1269 break; 1270 } 1271 1272 pdata->ops->rx_readfifo(pdata, 1273 (unsigned int *)skb->data, pktwords); 1274 1275 /* Align IP on 16B boundary */ 1276 skb_reserve(skb, NET_IP_ALIGN); 1277 skb_put(skb, pktlength - 4); 1278 skb->protocol = eth_type_trans(skb, dev); 1279 skb_checksum_none_assert(skb); 1280 netif_receive_skb(skb); 1281 1282 /* Update counters */ 1283 dev->stats.rx_packets++; 1284 dev->stats.rx_bytes += (pktlength - 4); 1285 } 1286 1287 /* Return total received packets */ 1288 return npackets; 1289 } 1290 1291 /* Returns hash bit number for given MAC address 1292 * Example: 1293 * 01 00 5E 00 00 01 -> returns bit number 31 */ 1294 static unsigned int smsc911x_hash(char addr[ETH_ALEN]) 1295 { 1296 return (ether_crc(ETH_ALEN, addr) >> 26) & 0x3f; 1297 } 1298 1299 static void smsc911x_rx_multicast_update(struct smsc911x_data *pdata) 1300 { 1301 /* Performs the multicast & mac_cr update. This is called when 1302 * safe on the current hardware, and with the mac_lock held */ 1303 unsigned int mac_cr; 1304 1305 SMSC_ASSERT_MAC_LOCK(pdata); 1306 1307 mac_cr = smsc911x_mac_read(pdata, MAC_CR); 1308 mac_cr |= pdata->set_bits_mask; 1309 mac_cr &= ~(pdata->clear_bits_mask); 1310 smsc911x_mac_write(pdata, MAC_CR, mac_cr); 1311 smsc911x_mac_write(pdata, HASHH, pdata->hashhi); 1312 smsc911x_mac_write(pdata, HASHL, pdata->hashlo); 1313 SMSC_TRACE(pdata, hw, "maccr 0x%08X, HASHH 0x%08X, HASHL 0x%08X", 1314 mac_cr, pdata->hashhi, pdata->hashlo); 1315 } 1316 1317 static void smsc911x_rx_multicast_update_workaround(struct smsc911x_data *pdata) 1318 { 1319 unsigned int mac_cr; 1320 1321 /* This function is only called for older LAN911x devices 1322 * (revA or revB), where MAC_CR, HASHH and HASHL should not 1323 * be modified during Rx - newer devices immediately update the 1324 * registers. 1325 * 1326 * This is called from interrupt context */ 1327 1328 spin_lock(&pdata->mac_lock); 1329 1330 /* Check Rx has stopped */ 1331 if (smsc911x_mac_read(pdata, MAC_CR) & MAC_CR_RXEN_) 1332 SMSC_WARN(pdata, drv, "Rx not stopped"); 1333 1334 /* Perform the update - safe to do now Rx has stopped */ 1335 smsc911x_rx_multicast_update(pdata); 1336 1337 /* Re-enable Rx */ 1338 mac_cr = smsc911x_mac_read(pdata, MAC_CR); 1339 mac_cr |= MAC_CR_RXEN_; 1340 smsc911x_mac_write(pdata, MAC_CR, mac_cr); 1341 1342 pdata->multicast_update_pending = 0; 1343 1344 spin_unlock(&pdata->mac_lock); 1345 } 1346 1347 static int smsc911x_phy_general_power_up(struct smsc911x_data *pdata) 1348 { 1349 int rc = 0; 1350 1351 if (!pdata->phy_dev) 1352 return rc; 1353 1354 /* If the internal PHY is in General Power-Down mode, all, except the 1355 * management interface, is powered-down and stays in that condition as 1356 * long as Phy register bit 0.11 is HIGH. 1357 * 1358 * In that case, clear the bit 0.11, so the PHY powers up and we can 1359 * access to the phy registers. 1360 */ 1361 rc = phy_read(pdata->phy_dev, MII_BMCR); 1362 if (rc < 0) { 1363 SMSC_WARN(pdata, drv, "Failed reading PHY control reg"); 1364 return rc; 1365 } 1366 1367 /* If the PHY general power-down bit is not set is not necessary to 1368 * disable the general power down-mode. 1369 */ 1370 if (rc & BMCR_PDOWN) { 1371 rc = phy_write(pdata->phy_dev, MII_BMCR, rc & ~BMCR_PDOWN); 1372 if (rc < 0) { 1373 SMSC_WARN(pdata, drv, "Failed writing PHY control reg"); 1374 return rc; 1375 } 1376 1377 usleep_range(1000, 1500); 1378 } 1379 1380 return 0; 1381 } 1382 1383 static int smsc911x_phy_disable_energy_detect(struct smsc911x_data *pdata) 1384 { 1385 int rc = 0; 1386 1387 if (!pdata->phy_dev) 1388 return rc; 1389 1390 rc = phy_read(pdata->phy_dev, MII_LAN83C185_CTRL_STATUS); 1391 1392 if (rc < 0) { 1393 SMSC_WARN(pdata, drv, "Failed reading PHY control reg"); 1394 return rc; 1395 } 1396 1397 /* Only disable if energy detect mode is already enabled */ 1398 if (rc & MII_LAN83C185_EDPWRDOWN) { 1399 /* Disable energy detect mode for this SMSC Transceivers */ 1400 rc = phy_write(pdata->phy_dev, MII_LAN83C185_CTRL_STATUS, 1401 rc & (~MII_LAN83C185_EDPWRDOWN)); 1402 1403 if (rc < 0) { 1404 SMSC_WARN(pdata, drv, "Failed writing PHY control reg"); 1405 return rc; 1406 } 1407 /* Allow PHY to wakeup */ 1408 mdelay(2); 1409 } 1410 1411 return 0; 1412 } 1413 1414 static int smsc911x_phy_enable_energy_detect(struct smsc911x_data *pdata) 1415 { 1416 int rc = 0; 1417 1418 if (!pdata->phy_dev) 1419 return rc; 1420 1421 rc = phy_read(pdata->phy_dev, MII_LAN83C185_CTRL_STATUS); 1422 1423 if (rc < 0) { 1424 SMSC_WARN(pdata, drv, "Failed reading PHY control reg"); 1425 return rc; 1426 } 1427 1428 /* Only enable if energy detect mode is already disabled */ 1429 if (!(rc & MII_LAN83C185_EDPWRDOWN)) { 1430 /* Enable energy detect mode for this SMSC Transceivers */ 1431 rc = phy_write(pdata->phy_dev, MII_LAN83C185_CTRL_STATUS, 1432 rc | MII_LAN83C185_EDPWRDOWN); 1433 1434 if (rc < 0) { 1435 SMSC_WARN(pdata, drv, "Failed writing PHY control reg"); 1436 return rc; 1437 } 1438 } 1439 return 0; 1440 } 1441 1442 static int smsc911x_soft_reset(struct smsc911x_data *pdata) 1443 { 1444 unsigned int timeout; 1445 unsigned int temp; 1446 int ret; 1447 1448 /* 1449 * Make sure to power-up the PHY chip before doing a reset, otherwise 1450 * the reset fails. 1451 */ 1452 ret = smsc911x_phy_general_power_up(pdata); 1453 if (ret) { 1454 SMSC_WARN(pdata, drv, "Failed to power-up the PHY chip"); 1455 return ret; 1456 } 1457 1458 /* 1459 * LAN9210/LAN9211/LAN9220/LAN9221 chips have an internal PHY that 1460 * are initialized in a Energy Detect Power-Down mode that prevents 1461 * the MAC chip to be software reseted. So we have to wakeup the PHY 1462 * before. 1463 */ 1464 if (pdata->generation == 4) { 1465 ret = smsc911x_phy_disable_energy_detect(pdata); 1466 1467 if (ret) { 1468 SMSC_WARN(pdata, drv, "Failed to wakeup the PHY chip"); 1469 return ret; 1470 } 1471 } 1472 1473 /* Reset the LAN911x */ 1474 smsc911x_reg_write(pdata, HW_CFG, HW_CFG_SRST_); 1475 timeout = 10; 1476 do { 1477 udelay(10); 1478 temp = smsc911x_reg_read(pdata, HW_CFG); 1479 } while ((--timeout) && (temp & HW_CFG_SRST_)); 1480 1481 if (unlikely(temp & HW_CFG_SRST_)) { 1482 SMSC_WARN(pdata, drv, "Failed to complete reset"); 1483 return -EIO; 1484 } 1485 1486 if (pdata->generation == 4) { 1487 ret = smsc911x_phy_enable_energy_detect(pdata); 1488 1489 if (ret) { 1490 SMSC_WARN(pdata, drv, "Failed to wakeup the PHY chip"); 1491 return ret; 1492 } 1493 } 1494 1495 return 0; 1496 } 1497 1498 /* Sets the device MAC address to dev_addr, called with mac_lock held */ 1499 static void 1500 smsc911x_set_hw_mac_address(struct smsc911x_data *pdata, u8 dev_addr[6]) 1501 { 1502 u32 mac_high16 = (dev_addr[5] << 8) | dev_addr[4]; 1503 u32 mac_low32 = (dev_addr[3] << 24) | (dev_addr[2] << 16) | 1504 (dev_addr[1] << 8) | dev_addr[0]; 1505 1506 SMSC_ASSERT_MAC_LOCK(pdata); 1507 1508 smsc911x_mac_write(pdata, ADDRH, mac_high16); 1509 smsc911x_mac_write(pdata, ADDRL, mac_low32); 1510 } 1511 1512 static void smsc911x_disable_irq_chip(struct net_device *dev) 1513 { 1514 struct smsc911x_data *pdata = netdev_priv(dev); 1515 1516 smsc911x_reg_write(pdata, INT_EN, 0); 1517 smsc911x_reg_write(pdata, INT_STS, 0xFFFFFFFF); 1518 } 1519 1520 static int smsc911x_open(struct net_device *dev) 1521 { 1522 struct smsc911x_data *pdata = netdev_priv(dev); 1523 unsigned int timeout; 1524 unsigned int temp; 1525 unsigned int intcfg; 1526 1527 /* if the phy is not yet registered, retry later*/ 1528 if (!pdata->phy_dev) { 1529 SMSC_WARN(pdata, hw, "phy_dev is NULL"); 1530 return -EAGAIN; 1531 } 1532 1533 /* Reset the LAN911x */ 1534 if (smsc911x_soft_reset(pdata)) { 1535 SMSC_WARN(pdata, hw, "soft reset failed"); 1536 return -EIO; 1537 } 1538 1539 smsc911x_reg_write(pdata, HW_CFG, 0x00050000); 1540 smsc911x_reg_write(pdata, AFC_CFG, 0x006E3740); 1541 1542 /* Increase the legal frame size of VLAN tagged frames to 1522 bytes */ 1543 spin_lock_irq(&pdata->mac_lock); 1544 smsc911x_mac_write(pdata, VLAN1, ETH_P_8021Q); 1545 spin_unlock_irq(&pdata->mac_lock); 1546 1547 /* Make sure EEPROM has finished loading before setting GPIO_CFG */ 1548 timeout = 50; 1549 while ((smsc911x_reg_read(pdata, E2P_CMD) & E2P_CMD_EPC_BUSY_) && 1550 --timeout) { 1551 udelay(10); 1552 } 1553 1554 if (unlikely(timeout == 0)) 1555 SMSC_WARN(pdata, ifup, 1556 "Timed out waiting for EEPROM busy bit to clear"); 1557 1558 smsc911x_reg_write(pdata, GPIO_CFG, 0x70070000); 1559 1560 /* The soft reset above cleared the device's MAC address, 1561 * restore it from local copy (set in probe) */ 1562 spin_lock_irq(&pdata->mac_lock); 1563 smsc911x_set_hw_mac_address(pdata, dev->dev_addr); 1564 spin_unlock_irq(&pdata->mac_lock); 1565 1566 /* Initialise irqs, but leave all sources disabled */ 1567 smsc911x_disable_irq_chip(dev); 1568 1569 /* Set interrupt deassertion to 100uS */ 1570 intcfg = ((10 << 24) | INT_CFG_IRQ_EN_); 1571 1572 if (pdata->config.irq_polarity) { 1573 SMSC_TRACE(pdata, ifup, "irq polarity: active high"); 1574 intcfg |= INT_CFG_IRQ_POL_; 1575 } else { 1576 SMSC_TRACE(pdata, ifup, "irq polarity: active low"); 1577 } 1578 1579 if (pdata->config.irq_type) { 1580 SMSC_TRACE(pdata, ifup, "irq type: push-pull"); 1581 intcfg |= INT_CFG_IRQ_TYPE_; 1582 } else { 1583 SMSC_TRACE(pdata, ifup, "irq type: open drain"); 1584 } 1585 1586 smsc911x_reg_write(pdata, INT_CFG, intcfg); 1587 1588 SMSC_TRACE(pdata, ifup, "Testing irq handler using IRQ %d", dev->irq); 1589 pdata->software_irq_signal = 0; 1590 smp_wmb(); 1591 1592 temp = smsc911x_reg_read(pdata, INT_EN); 1593 temp |= INT_EN_SW_INT_EN_; 1594 smsc911x_reg_write(pdata, INT_EN, temp); 1595 1596 timeout = 1000; 1597 while (timeout--) { 1598 if (pdata->software_irq_signal) 1599 break; 1600 msleep(1); 1601 } 1602 1603 if (!pdata->software_irq_signal) { 1604 netdev_warn(dev, "ISR failed signaling test (IRQ %d)\n", 1605 dev->irq); 1606 return -ENODEV; 1607 } 1608 SMSC_TRACE(pdata, ifup, "IRQ handler passed test using IRQ %d", 1609 dev->irq); 1610 1611 netdev_info(dev, "SMSC911x/921x identified at %#08lx, IRQ: %d\n", 1612 (unsigned long)pdata->ioaddr, dev->irq); 1613 1614 /* Reset the last known duplex and carrier */ 1615 pdata->last_duplex = -1; 1616 pdata->last_carrier = -1; 1617 1618 /* Bring the PHY up */ 1619 phy_start(pdata->phy_dev); 1620 1621 temp = smsc911x_reg_read(pdata, HW_CFG); 1622 /* Preserve TX FIFO size and external PHY configuration */ 1623 temp &= (HW_CFG_TX_FIF_SZ_|0x00000FFF); 1624 temp |= HW_CFG_SF_; 1625 smsc911x_reg_write(pdata, HW_CFG, temp); 1626 1627 temp = smsc911x_reg_read(pdata, FIFO_INT); 1628 temp |= FIFO_INT_TX_AVAIL_LEVEL_; 1629 temp &= ~(FIFO_INT_RX_STS_LEVEL_); 1630 smsc911x_reg_write(pdata, FIFO_INT, temp); 1631 1632 /* set RX Data offset to 2 bytes for alignment */ 1633 smsc911x_reg_write(pdata, RX_CFG, (NET_IP_ALIGN << 8)); 1634 1635 /* enable NAPI polling before enabling RX interrupts */ 1636 napi_enable(&pdata->napi); 1637 1638 temp = smsc911x_reg_read(pdata, INT_EN); 1639 temp |= (INT_EN_TDFA_EN_ | INT_EN_RSFL_EN_ | INT_EN_RXSTOP_INT_EN_); 1640 smsc911x_reg_write(pdata, INT_EN, temp); 1641 1642 spin_lock_irq(&pdata->mac_lock); 1643 temp = smsc911x_mac_read(pdata, MAC_CR); 1644 temp |= (MAC_CR_TXEN_ | MAC_CR_RXEN_ | MAC_CR_HBDIS_); 1645 smsc911x_mac_write(pdata, MAC_CR, temp); 1646 spin_unlock_irq(&pdata->mac_lock); 1647 1648 smsc911x_reg_write(pdata, TX_CFG, TX_CFG_TX_ON_); 1649 1650 netif_start_queue(dev); 1651 return 0; 1652 } 1653 1654 /* Entry point for stopping the interface */ 1655 static int smsc911x_stop(struct net_device *dev) 1656 { 1657 struct smsc911x_data *pdata = netdev_priv(dev); 1658 unsigned int temp; 1659 1660 /* Disable all device interrupts */ 1661 temp = smsc911x_reg_read(pdata, INT_CFG); 1662 temp &= ~INT_CFG_IRQ_EN_; 1663 smsc911x_reg_write(pdata, INT_CFG, temp); 1664 1665 /* Stop Tx and Rx polling */ 1666 netif_stop_queue(dev); 1667 napi_disable(&pdata->napi); 1668 1669 /* At this point all Rx and Tx activity is stopped */ 1670 dev->stats.rx_dropped += smsc911x_reg_read(pdata, RX_DROP); 1671 smsc911x_tx_update_txcounters(dev); 1672 1673 /* Bring the PHY down */ 1674 if (pdata->phy_dev) 1675 phy_stop(pdata->phy_dev); 1676 1677 SMSC_TRACE(pdata, ifdown, "Interface stopped"); 1678 return 0; 1679 } 1680 1681 /* Entry point for transmitting a packet */ 1682 static int smsc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) 1683 { 1684 struct smsc911x_data *pdata = netdev_priv(dev); 1685 unsigned int freespace; 1686 unsigned int tx_cmd_a; 1687 unsigned int tx_cmd_b; 1688 unsigned int temp; 1689 u32 wrsz; 1690 ulong bufp; 1691 1692 freespace = smsc911x_reg_read(pdata, TX_FIFO_INF) & TX_FIFO_INF_TDFREE_; 1693 1694 if (unlikely(freespace < TX_FIFO_LOW_THRESHOLD)) 1695 SMSC_WARN(pdata, tx_err, 1696 "Tx data fifo low, space available: %d", freespace); 1697 1698 /* Word alignment adjustment */ 1699 tx_cmd_a = (u32)((ulong)skb->data & 0x03) << 16; 1700 tx_cmd_a |= TX_CMD_A_FIRST_SEG_ | TX_CMD_A_LAST_SEG_; 1701 tx_cmd_a |= (unsigned int)skb->len; 1702 1703 tx_cmd_b = ((unsigned int)skb->len) << 16; 1704 tx_cmd_b |= (unsigned int)skb->len; 1705 1706 smsc911x_reg_write(pdata, TX_DATA_FIFO, tx_cmd_a); 1707 smsc911x_reg_write(pdata, TX_DATA_FIFO, tx_cmd_b); 1708 1709 bufp = (ulong)skb->data & (~0x3); 1710 wrsz = (u32)skb->len + 3; 1711 wrsz += (u32)((ulong)skb->data & 0x3); 1712 wrsz >>= 2; 1713 1714 pdata->ops->tx_writefifo(pdata, (unsigned int *)bufp, wrsz); 1715 freespace -= (skb->len + 32); 1716 skb_tx_timestamp(skb); 1717 dev_consume_skb_any(skb); 1718 1719 if (unlikely(smsc911x_tx_get_txstatcount(pdata) >= 30)) 1720 smsc911x_tx_update_txcounters(dev); 1721 1722 if (freespace < TX_FIFO_LOW_THRESHOLD) { 1723 netif_stop_queue(dev); 1724 temp = smsc911x_reg_read(pdata, FIFO_INT); 1725 temp &= 0x00FFFFFF; 1726 temp |= 0x32000000; 1727 smsc911x_reg_write(pdata, FIFO_INT, temp); 1728 } 1729 1730 return NETDEV_TX_OK; 1731 } 1732 1733 /* Entry point for getting status counters */ 1734 static struct net_device_stats *smsc911x_get_stats(struct net_device *dev) 1735 { 1736 struct smsc911x_data *pdata = netdev_priv(dev); 1737 smsc911x_tx_update_txcounters(dev); 1738 dev->stats.rx_dropped += smsc911x_reg_read(pdata, RX_DROP); 1739 return &dev->stats; 1740 } 1741 1742 /* Entry point for setting addressing modes */ 1743 static void smsc911x_set_multicast_list(struct net_device *dev) 1744 { 1745 struct smsc911x_data *pdata = netdev_priv(dev); 1746 unsigned long flags; 1747 1748 if (dev->flags & IFF_PROMISC) { 1749 /* Enabling promiscuous mode */ 1750 pdata->set_bits_mask = MAC_CR_PRMS_; 1751 pdata->clear_bits_mask = (MAC_CR_MCPAS_ | MAC_CR_HPFILT_); 1752 pdata->hashhi = 0; 1753 pdata->hashlo = 0; 1754 } else if (dev->flags & IFF_ALLMULTI) { 1755 /* Enabling all multicast mode */ 1756 pdata->set_bits_mask = MAC_CR_MCPAS_; 1757 pdata->clear_bits_mask = (MAC_CR_PRMS_ | MAC_CR_HPFILT_); 1758 pdata->hashhi = 0; 1759 pdata->hashlo = 0; 1760 } else if (!netdev_mc_empty(dev)) { 1761 /* Enabling specific multicast addresses */ 1762 unsigned int hash_high = 0; 1763 unsigned int hash_low = 0; 1764 struct netdev_hw_addr *ha; 1765 1766 pdata->set_bits_mask = MAC_CR_HPFILT_; 1767 pdata->clear_bits_mask = (MAC_CR_PRMS_ | MAC_CR_MCPAS_); 1768 1769 netdev_for_each_mc_addr(ha, dev) { 1770 unsigned int bitnum = smsc911x_hash(ha->addr); 1771 unsigned int mask = 0x01 << (bitnum & 0x1F); 1772 1773 if (bitnum & 0x20) 1774 hash_high |= mask; 1775 else 1776 hash_low |= mask; 1777 } 1778 1779 pdata->hashhi = hash_high; 1780 pdata->hashlo = hash_low; 1781 } else { 1782 /* Enabling local MAC address only */ 1783 pdata->set_bits_mask = 0; 1784 pdata->clear_bits_mask = 1785 (MAC_CR_PRMS_ | MAC_CR_MCPAS_ | MAC_CR_HPFILT_); 1786 pdata->hashhi = 0; 1787 pdata->hashlo = 0; 1788 } 1789 1790 spin_lock_irqsave(&pdata->mac_lock, flags); 1791 1792 if (pdata->generation <= 1) { 1793 /* Older hardware revision - cannot change these flags while 1794 * receiving data */ 1795 if (!pdata->multicast_update_pending) { 1796 unsigned int temp; 1797 SMSC_TRACE(pdata, hw, "scheduling mcast update"); 1798 pdata->multicast_update_pending = 1; 1799 1800 /* Request the hardware to stop, then perform the 1801 * update when we get an RX_STOP interrupt */ 1802 temp = smsc911x_mac_read(pdata, MAC_CR); 1803 temp &= ~(MAC_CR_RXEN_); 1804 smsc911x_mac_write(pdata, MAC_CR, temp); 1805 } else { 1806 /* There is another update pending, this should now 1807 * use the newer values */ 1808 } 1809 } else { 1810 /* Newer hardware revision - can write immediately */ 1811 smsc911x_rx_multicast_update(pdata); 1812 } 1813 1814 spin_unlock_irqrestore(&pdata->mac_lock, flags); 1815 } 1816 1817 static irqreturn_t smsc911x_irqhandler(int irq, void *dev_id) 1818 { 1819 struct net_device *dev = dev_id; 1820 struct smsc911x_data *pdata = netdev_priv(dev); 1821 u32 intsts = smsc911x_reg_read(pdata, INT_STS); 1822 u32 inten = smsc911x_reg_read(pdata, INT_EN); 1823 int serviced = IRQ_NONE; 1824 u32 temp; 1825 1826 if (unlikely(intsts & inten & INT_STS_SW_INT_)) { 1827 temp = smsc911x_reg_read(pdata, INT_EN); 1828 temp &= (~INT_EN_SW_INT_EN_); 1829 smsc911x_reg_write(pdata, INT_EN, temp); 1830 smsc911x_reg_write(pdata, INT_STS, INT_STS_SW_INT_); 1831 pdata->software_irq_signal = 1; 1832 smp_wmb(); 1833 serviced = IRQ_HANDLED; 1834 } 1835 1836 if (unlikely(intsts & inten & INT_STS_RXSTOP_INT_)) { 1837 /* Called when there is a multicast update scheduled and 1838 * it is now safe to complete the update */ 1839 SMSC_TRACE(pdata, intr, "RX Stop interrupt"); 1840 smsc911x_reg_write(pdata, INT_STS, INT_STS_RXSTOP_INT_); 1841 if (pdata->multicast_update_pending) 1842 smsc911x_rx_multicast_update_workaround(pdata); 1843 serviced = IRQ_HANDLED; 1844 } 1845 1846 if (intsts & inten & INT_STS_TDFA_) { 1847 temp = smsc911x_reg_read(pdata, FIFO_INT); 1848 temp |= FIFO_INT_TX_AVAIL_LEVEL_; 1849 smsc911x_reg_write(pdata, FIFO_INT, temp); 1850 smsc911x_reg_write(pdata, INT_STS, INT_STS_TDFA_); 1851 netif_wake_queue(dev); 1852 serviced = IRQ_HANDLED; 1853 } 1854 1855 if (unlikely(intsts & inten & INT_STS_RXE_)) { 1856 SMSC_TRACE(pdata, intr, "RX Error interrupt"); 1857 smsc911x_reg_write(pdata, INT_STS, INT_STS_RXE_); 1858 serviced = IRQ_HANDLED; 1859 } 1860 1861 if (likely(intsts & inten & INT_STS_RSFL_)) { 1862 if (likely(napi_schedule_prep(&pdata->napi))) { 1863 /* Disable Rx interrupts */ 1864 temp = smsc911x_reg_read(pdata, INT_EN); 1865 temp &= (~INT_EN_RSFL_EN_); 1866 smsc911x_reg_write(pdata, INT_EN, temp); 1867 /* Schedule a NAPI poll */ 1868 __napi_schedule(&pdata->napi); 1869 } else { 1870 SMSC_WARN(pdata, rx_err, "napi_schedule_prep failed"); 1871 } 1872 serviced = IRQ_HANDLED; 1873 } 1874 1875 return serviced; 1876 } 1877 1878 #ifdef CONFIG_NET_POLL_CONTROLLER 1879 static void smsc911x_poll_controller(struct net_device *dev) 1880 { 1881 disable_irq(dev->irq); 1882 smsc911x_irqhandler(0, dev); 1883 enable_irq(dev->irq); 1884 } 1885 #endif /* CONFIG_NET_POLL_CONTROLLER */ 1886 1887 static int smsc911x_set_mac_address(struct net_device *dev, void *p) 1888 { 1889 struct smsc911x_data *pdata = netdev_priv(dev); 1890 struct sockaddr *addr = p; 1891 1892 /* On older hardware revisions we cannot change the mac address 1893 * registers while receiving data. Newer devices can safely change 1894 * this at any time. */ 1895 if (pdata->generation <= 1 && netif_running(dev)) 1896 return -EBUSY; 1897 1898 if (!is_valid_ether_addr(addr->sa_data)) 1899 return -EADDRNOTAVAIL; 1900 1901 memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); 1902 1903 spin_lock_irq(&pdata->mac_lock); 1904 smsc911x_set_hw_mac_address(pdata, dev->dev_addr); 1905 spin_unlock_irq(&pdata->mac_lock); 1906 1907 netdev_info(dev, "MAC Address: %pM\n", dev->dev_addr); 1908 1909 return 0; 1910 } 1911 1912 /* Standard ioctls for mii-tool */ 1913 static int smsc911x_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) 1914 { 1915 struct smsc911x_data *pdata = netdev_priv(dev); 1916 1917 if (!netif_running(dev) || !pdata->phy_dev) 1918 return -EINVAL; 1919 1920 return phy_mii_ioctl(pdata->phy_dev, ifr, cmd); 1921 } 1922 1923 static int 1924 smsc911x_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd) 1925 { 1926 struct smsc911x_data *pdata = netdev_priv(dev); 1927 1928 cmd->maxtxpkt = 1; 1929 cmd->maxrxpkt = 1; 1930 return phy_ethtool_gset(pdata->phy_dev, cmd); 1931 } 1932 1933 static int 1934 smsc911x_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd) 1935 { 1936 struct smsc911x_data *pdata = netdev_priv(dev); 1937 1938 return phy_ethtool_sset(pdata->phy_dev, cmd); 1939 } 1940 1941 static void smsc911x_ethtool_getdrvinfo(struct net_device *dev, 1942 struct ethtool_drvinfo *info) 1943 { 1944 strlcpy(info->driver, SMSC_CHIPNAME, sizeof(info->driver)); 1945 strlcpy(info->version, SMSC_DRV_VERSION, sizeof(info->version)); 1946 strlcpy(info->bus_info, dev_name(dev->dev.parent), 1947 sizeof(info->bus_info)); 1948 } 1949 1950 static int smsc911x_ethtool_nwayreset(struct net_device *dev) 1951 { 1952 struct smsc911x_data *pdata = netdev_priv(dev); 1953 1954 return phy_start_aneg(pdata->phy_dev); 1955 } 1956 1957 static u32 smsc911x_ethtool_getmsglevel(struct net_device *dev) 1958 { 1959 struct smsc911x_data *pdata = netdev_priv(dev); 1960 return pdata->msg_enable; 1961 } 1962 1963 static void smsc911x_ethtool_setmsglevel(struct net_device *dev, u32 level) 1964 { 1965 struct smsc911x_data *pdata = netdev_priv(dev); 1966 pdata->msg_enable = level; 1967 } 1968 1969 static int smsc911x_ethtool_getregslen(struct net_device *dev) 1970 { 1971 return (((E2P_DATA - ID_REV) / 4 + 1) + (WUCSR - MAC_CR) + 1 + 32) * 1972 sizeof(u32); 1973 } 1974 1975 static void 1976 smsc911x_ethtool_getregs(struct net_device *dev, struct ethtool_regs *regs, 1977 void *buf) 1978 { 1979 struct smsc911x_data *pdata = netdev_priv(dev); 1980 struct phy_device *phy_dev = pdata->phy_dev; 1981 unsigned long flags; 1982 unsigned int i; 1983 unsigned int j = 0; 1984 u32 *data = buf; 1985 1986 regs->version = pdata->idrev; 1987 for (i = ID_REV; i <= E2P_DATA; i += (sizeof(u32))) 1988 data[j++] = smsc911x_reg_read(pdata, i); 1989 1990 for (i = MAC_CR; i <= WUCSR; i++) { 1991 spin_lock_irqsave(&pdata->mac_lock, flags); 1992 data[j++] = smsc911x_mac_read(pdata, i); 1993 spin_unlock_irqrestore(&pdata->mac_lock, flags); 1994 } 1995 1996 for (i = 0; i <= 31; i++) 1997 data[j++] = smsc911x_mii_read(phy_dev->bus, phy_dev->addr, i); 1998 } 1999 2000 static void smsc911x_eeprom_enable_access(struct smsc911x_data *pdata) 2001 { 2002 unsigned int temp = smsc911x_reg_read(pdata, GPIO_CFG); 2003 temp &= ~GPIO_CFG_EEPR_EN_; 2004 smsc911x_reg_write(pdata, GPIO_CFG, temp); 2005 msleep(1); 2006 } 2007 2008 static int smsc911x_eeprom_send_cmd(struct smsc911x_data *pdata, u32 op) 2009 { 2010 int timeout = 100; 2011 u32 e2cmd; 2012 2013 SMSC_TRACE(pdata, drv, "op 0x%08x", op); 2014 if (smsc911x_reg_read(pdata, E2P_CMD) & E2P_CMD_EPC_BUSY_) { 2015 SMSC_WARN(pdata, drv, "Busy at start"); 2016 return -EBUSY; 2017 } 2018 2019 e2cmd = op | E2P_CMD_EPC_BUSY_; 2020 smsc911x_reg_write(pdata, E2P_CMD, e2cmd); 2021 2022 do { 2023 msleep(1); 2024 e2cmd = smsc911x_reg_read(pdata, E2P_CMD); 2025 } while ((e2cmd & E2P_CMD_EPC_BUSY_) && (--timeout)); 2026 2027 if (!timeout) { 2028 SMSC_TRACE(pdata, drv, "TIMED OUT"); 2029 return -EAGAIN; 2030 } 2031 2032 if (e2cmd & E2P_CMD_EPC_TIMEOUT_) { 2033 SMSC_TRACE(pdata, drv, "Error occurred during eeprom operation"); 2034 return -EINVAL; 2035 } 2036 2037 return 0; 2038 } 2039 2040 static int smsc911x_eeprom_read_location(struct smsc911x_data *pdata, 2041 u8 address, u8 *data) 2042 { 2043 u32 op = E2P_CMD_EPC_CMD_READ_ | address; 2044 int ret; 2045 2046 SMSC_TRACE(pdata, drv, "address 0x%x", address); 2047 ret = smsc911x_eeprom_send_cmd(pdata, op); 2048 2049 if (!ret) 2050 data[address] = smsc911x_reg_read(pdata, E2P_DATA); 2051 2052 return ret; 2053 } 2054 2055 static int smsc911x_eeprom_write_location(struct smsc911x_data *pdata, 2056 u8 address, u8 data) 2057 { 2058 u32 op = E2P_CMD_EPC_CMD_ERASE_ | address; 2059 u32 temp; 2060 int ret; 2061 2062 SMSC_TRACE(pdata, drv, "address 0x%x, data 0x%x", address, data); 2063 ret = smsc911x_eeprom_send_cmd(pdata, op); 2064 2065 if (!ret) { 2066 op = E2P_CMD_EPC_CMD_WRITE_ | address; 2067 smsc911x_reg_write(pdata, E2P_DATA, (u32)data); 2068 2069 /* Workaround for hardware read-after-write restriction */ 2070 temp = smsc911x_reg_read(pdata, BYTE_TEST); 2071 2072 ret = smsc911x_eeprom_send_cmd(pdata, op); 2073 } 2074 2075 return ret; 2076 } 2077 2078 static int smsc911x_ethtool_get_eeprom_len(struct net_device *dev) 2079 { 2080 return SMSC911X_EEPROM_SIZE; 2081 } 2082 2083 static int smsc911x_ethtool_get_eeprom(struct net_device *dev, 2084 struct ethtool_eeprom *eeprom, u8 *data) 2085 { 2086 struct smsc911x_data *pdata = netdev_priv(dev); 2087 u8 eeprom_data[SMSC911X_EEPROM_SIZE]; 2088 int len; 2089 int i; 2090 2091 smsc911x_eeprom_enable_access(pdata); 2092 2093 len = min(eeprom->len, SMSC911X_EEPROM_SIZE); 2094 for (i = 0; i < len; i++) { 2095 int ret = smsc911x_eeprom_read_location(pdata, i, eeprom_data); 2096 if (ret < 0) { 2097 eeprom->len = 0; 2098 return ret; 2099 } 2100 } 2101 2102 memcpy(data, &eeprom_data[eeprom->offset], len); 2103 eeprom->len = len; 2104 return 0; 2105 } 2106 2107 static int smsc911x_ethtool_set_eeprom(struct net_device *dev, 2108 struct ethtool_eeprom *eeprom, u8 *data) 2109 { 2110 int ret; 2111 struct smsc911x_data *pdata = netdev_priv(dev); 2112 2113 smsc911x_eeprom_enable_access(pdata); 2114 smsc911x_eeprom_send_cmd(pdata, E2P_CMD_EPC_CMD_EWEN_); 2115 ret = smsc911x_eeprom_write_location(pdata, eeprom->offset, *data); 2116 smsc911x_eeprom_send_cmd(pdata, E2P_CMD_EPC_CMD_EWDS_); 2117 2118 /* Single byte write, according to man page */ 2119 eeprom->len = 1; 2120 2121 return ret; 2122 } 2123 2124 static const struct ethtool_ops smsc911x_ethtool_ops = { 2125 .get_settings = smsc911x_ethtool_getsettings, 2126 .set_settings = smsc911x_ethtool_setsettings, 2127 .get_link = ethtool_op_get_link, 2128 .get_drvinfo = smsc911x_ethtool_getdrvinfo, 2129 .nway_reset = smsc911x_ethtool_nwayreset, 2130 .get_msglevel = smsc911x_ethtool_getmsglevel, 2131 .set_msglevel = smsc911x_ethtool_setmsglevel, 2132 .get_regs_len = smsc911x_ethtool_getregslen, 2133 .get_regs = smsc911x_ethtool_getregs, 2134 .get_eeprom_len = smsc911x_ethtool_get_eeprom_len, 2135 .get_eeprom = smsc911x_ethtool_get_eeprom, 2136 .set_eeprom = smsc911x_ethtool_set_eeprom, 2137 .get_ts_info = ethtool_op_get_ts_info, 2138 }; 2139 2140 static const struct net_device_ops smsc911x_netdev_ops = { 2141 .ndo_open = smsc911x_open, 2142 .ndo_stop = smsc911x_stop, 2143 .ndo_start_xmit = smsc911x_hard_start_xmit, 2144 .ndo_get_stats = smsc911x_get_stats, 2145 .ndo_set_rx_mode = smsc911x_set_multicast_list, 2146 .ndo_do_ioctl = smsc911x_do_ioctl, 2147 .ndo_change_mtu = eth_change_mtu, 2148 .ndo_validate_addr = eth_validate_addr, 2149 .ndo_set_mac_address = smsc911x_set_mac_address, 2150 #ifdef CONFIG_NET_POLL_CONTROLLER 2151 .ndo_poll_controller = smsc911x_poll_controller, 2152 #endif 2153 }; 2154 2155 /* copies the current mac address from hardware to dev->dev_addr */ 2156 static void smsc911x_read_mac_address(struct net_device *dev) 2157 { 2158 struct smsc911x_data *pdata = netdev_priv(dev); 2159 u32 mac_high16 = smsc911x_mac_read(pdata, ADDRH); 2160 u32 mac_low32 = smsc911x_mac_read(pdata, ADDRL); 2161 2162 dev->dev_addr[0] = (u8)(mac_low32); 2163 dev->dev_addr[1] = (u8)(mac_low32 >> 8); 2164 dev->dev_addr[2] = (u8)(mac_low32 >> 16); 2165 dev->dev_addr[3] = (u8)(mac_low32 >> 24); 2166 dev->dev_addr[4] = (u8)(mac_high16); 2167 dev->dev_addr[5] = (u8)(mac_high16 >> 8); 2168 } 2169 2170 /* Initializing private device structures, only called from probe */ 2171 static int smsc911x_init(struct net_device *dev) 2172 { 2173 struct smsc911x_data *pdata = netdev_priv(dev); 2174 unsigned int byte_test, mask; 2175 unsigned int to = 100; 2176 2177 SMSC_TRACE(pdata, probe, "Driver Parameters:"); 2178 SMSC_TRACE(pdata, probe, "LAN base: 0x%08lX", 2179 (unsigned long)pdata->ioaddr); 2180 SMSC_TRACE(pdata, probe, "IRQ: %d", dev->irq); 2181 SMSC_TRACE(pdata, probe, "PHY will be autodetected."); 2182 2183 spin_lock_init(&pdata->dev_lock); 2184 spin_lock_init(&pdata->mac_lock); 2185 2186 if (pdata->ioaddr == NULL) { 2187 SMSC_WARN(pdata, probe, "pdata->ioaddr: 0x00000000"); 2188 return -ENODEV; 2189 } 2190 2191 /* 2192 * poll the READY bit in PMT_CTRL. Any other access to the device is 2193 * forbidden while this bit isn't set. Try for 100ms 2194 * 2195 * Note that this test is done before the WORD_SWAP register is 2196 * programmed. So in some configurations the READY bit is at 16 before 2197 * WORD_SWAP is written to. This issue is worked around by waiting 2198 * until either bit 0 or bit 16 gets set in PMT_CTRL. 2199 * 2200 * SMSC has confirmed that checking bit 16 (marked as reserved in 2201 * the datasheet) is fine since these bits "will either never be set 2202 * or can only go high after READY does (so also indicate the device 2203 * is ready)". 2204 */ 2205 2206 mask = PMT_CTRL_READY_ | swahw32(PMT_CTRL_READY_); 2207 while (!(smsc911x_reg_read(pdata, PMT_CTRL) & mask) && --to) 2208 udelay(1000); 2209 2210 if (to == 0) { 2211 netdev_err(dev, "Device not READY in 100ms aborting\n"); 2212 return -ENODEV; 2213 } 2214 2215 /* Check byte ordering */ 2216 byte_test = smsc911x_reg_read(pdata, BYTE_TEST); 2217 SMSC_TRACE(pdata, probe, "BYTE_TEST: 0x%08X", byte_test); 2218 if (byte_test == 0x43218765) { 2219 SMSC_TRACE(pdata, probe, "BYTE_TEST looks swapped, " 2220 "applying WORD_SWAP"); 2221 smsc911x_reg_write(pdata, WORD_SWAP, 0xffffffff); 2222 2223 /* 1 dummy read of BYTE_TEST is needed after a write to 2224 * WORD_SWAP before its contents are valid */ 2225 byte_test = smsc911x_reg_read(pdata, BYTE_TEST); 2226 2227 byte_test = smsc911x_reg_read(pdata, BYTE_TEST); 2228 } 2229 2230 if (byte_test != 0x87654321) { 2231 SMSC_WARN(pdata, drv, "BYTE_TEST: 0x%08X", byte_test); 2232 if (((byte_test >> 16) & 0xFFFF) == (byte_test & 0xFFFF)) { 2233 SMSC_WARN(pdata, probe, 2234 "top 16 bits equal to bottom 16 bits"); 2235 SMSC_TRACE(pdata, probe, 2236 "This may mean the chip is set " 2237 "for 32 bit while the bus is reading 16 bit"); 2238 } 2239 return -ENODEV; 2240 } 2241 2242 /* Default generation to zero (all workarounds apply) */ 2243 pdata->generation = 0; 2244 2245 pdata->idrev = smsc911x_reg_read(pdata, ID_REV); 2246 switch (pdata->idrev & 0xFFFF0000) { 2247 case 0x01180000: 2248 case 0x01170000: 2249 case 0x01160000: 2250 case 0x01150000: 2251 case 0x218A0000: 2252 /* LAN911[5678] family */ 2253 pdata->generation = pdata->idrev & 0x0000FFFF; 2254 break; 2255 2256 case 0x118A0000: 2257 case 0x117A0000: 2258 case 0x116A0000: 2259 case 0x115A0000: 2260 /* LAN921[5678] family */ 2261 pdata->generation = 3; 2262 break; 2263 2264 case 0x92100000: 2265 case 0x92110000: 2266 case 0x92200000: 2267 case 0x92210000: 2268 /* LAN9210/LAN9211/LAN9220/LAN9221 */ 2269 pdata->generation = 4; 2270 break; 2271 2272 default: 2273 SMSC_WARN(pdata, probe, "LAN911x not identified, idrev: 0x%08X", 2274 pdata->idrev); 2275 return -ENODEV; 2276 } 2277 2278 SMSC_TRACE(pdata, probe, 2279 "LAN911x identified, idrev: 0x%08X, generation: %d", 2280 pdata->idrev, pdata->generation); 2281 2282 if (pdata->generation == 0) 2283 SMSC_WARN(pdata, probe, 2284 "This driver is not intended for this chip revision"); 2285 2286 /* workaround for platforms without an eeprom, where the mac address 2287 * is stored elsewhere and set by the bootloader. This saves the 2288 * mac address before resetting the device */ 2289 if (pdata->config.flags & SMSC911X_SAVE_MAC_ADDRESS) { 2290 spin_lock_irq(&pdata->mac_lock); 2291 smsc911x_read_mac_address(dev); 2292 spin_unlock_irq(&pdata->mac_lock); 2293 } 2294 2295 /* Reset the LAN911x */ 2296 if (smsc911x_soft_reset(pdata)) 2297 return -ENODEV; 2298 2299 dev->flags |= IFF_MULTICAST; 2300 netif_napi_add(dev, &pdata->napi, smsc911x_poll, SMSC_NAPI_WEIGHT); 2301 dev->netdev_ops = &smsc911x_netdev_ops; 2302 dev->ethtool_ops = &smsc911x_ethtool_ops; 2303 2304 return 0; 2305 } 2306 2307 static int smsc911x_drv_remove(struct platform_device *pdev) 2308 { 2309 struct net_device *dev; 2310 struct smsc911x_data *pdata; 2311 struct resource *res; 2312 2313 dev = platform_get_drvdata(pdev); 2314 BUG_ON(!dev); 2315 pdata = netdev_priv(dev); 2316 BUG_ON(!pdata); 2317 BUG_ON(!pdata->ioaddr); 2318 BUG_ON(!pdata->phy_dev); 2319 2320 SMSC_TRACE(pdata, ifdown, "Stopping driver"); 2321 2322 phy_disconnect(pdata->phy_dev); 2323 pdata->phy_dev = NULL; 2324 mdiobus_unregister(pdata->mii_bus); 2325 mdiobus_free(pdata->mii_bus); 2326 2327 unregister_netdev(dev); 2328 free_irq(dev->irq, dev); 2329 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, 2330 "smsc911x-memory"); 2331 if (!res) 2332 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 2333 2334 release_mem_region(res->start, resource_size(res)); 2335 2336 iounmap(pdata->ioaddr); 2337 2338 (void)smsc911x_disable_resources(pdev); 2339 smsc911x_free_resources(pdev); 2340 2341 free_netdev(dev); 2342 2343 pm_runtime_put(&pdev->dev); 2344 pm_runtime_disable(&pdev->dev); 2345 2346 return 0; 2347 } 2348 2349 /* standard register acces */ 2350 static const struct smsc911x_ops standard_smsc911x_ops = { 2351 .reg_read = __smsc911x_reg_read, 2352 .reg_write = __smsc911x_reg_write, 2353 .rx_readfifo = smsc911x_rx_readfifo, 2354 .tx_writefifo = smsc911x_tx_writefifo, 2355 }; 2356 2357 /* shifted register access */ 2358 static const struct smsc911x_ops shifted_smsc911x_ops = { 2359 .reg_read = __smsc911x_reg_read_shift, 2360 .reg_write = __smsc911x_reg_write_shift, 2361 .rx_readfifo = smsc911x_rx_readfifo_shift, 2362 .tx_writefifo = smsc911x_tx_writefifo_shift, 2363 }; 2364 2365 #ifdef CONFIG_OF 2366 static int smsc911x_probe_config_dt(struct smsc911x_platform_config *config, 2367 struct device_node *np) 2368 { 2369 const char *mac; 2370 u32 width = 0; 2371 2372 if (!np) 2373 return -ENODEV; 2374 2375 config->phy_interface = of_get_phy_mode(np); 2376 2377 mac = of_get_mac_address(np); 2378 if (mac) 2379 memcpy(config->mac, mac, ETH_ALEN); 2380 2381 of_property_read_u32(np, "reg-shift", &config->shift); 2382 2383 of_property_read_u32(np, "reg-io-width", &width); 2384 if (width == 4) 2385 config->flags |= SMSC911X_USE_32BIT; 2386 else 2387 config->flags |= SMSC911X_USE_16BIT; 2388 2389 if (of_get_property(np, "smsc,irq-active-high", NULL)) 2390 config->irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH; 2391 2392 if (of_get_property(np, "smsc,irq-push-pull", NULL)) 2393 config->irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL; 2394 2395 if (of_get_property(np, "smsc,force-internal-phy", NULL)) 2396 config->flags |= SMSC911X_FORCE_INTERNAL_PHY; 2397 2398 if (of_get_property(np, "smsc,force-external-phy", NULL)) 2399 config->flags |= SMSC911X_FORCE_EXTERNAL_PHY; 2400 2401 if (of_get_property(np, "smsc,save-mac-address", NULL)) 2402 config->flags |= SMSC911X_SAVE_MAC_ADDRESS; 2403 2404 return 0; 2405 } 2406 #else 2407 static inline int smsc911x_probe_config_dt( 2408 struct smsc911x_platform_config *config, 2409 struct device_node *np) 2410 { 2411 return -ENODEV; 2412 } 2413 #endif /* CONFIG_OF */ 2414 2415 static int smsc911x_drv_probe(struct platform_device *pdev) 2416 { 2417 struct device_node *np = pdev->dev.of_node; 2418 struct net_device *dev; 2419 struct smsc911x_data *pdata; 2420 struct smsc911x_platform_config *config = dev_get_platdata(&pdev->dev); 2421 struct resource *res, *irq_res; 2422 unsigned int intcfg = 0; 2423 int res_size, irq_flags; 2424 int retval; 2425 2426 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, 2427 "smsc911x-memory"); 2428 if (!res) 2429 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 2430 if (!res) { 2431 pr_warn("Could not allocate resource\n"); 2432 retval = -ENODEV; 2433 goto out_0; 2434 } 2435 res_size = resource_size(res); 2436 2437 irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); 2438 if (!irq_res) { 2439 pr_warn("Could not allocate irq resource\n"); 2440 retval = -ENODEV; 2441 goto out_0; 2442 } 2443 2444 if (!request_mem_region(res->start, res_size, SMSC_CHIPNAME)) { 2445 retval = -EBUSY; 2446 goto out_0; 2447 } 2448 2449 dev = alloc_etherdev(sizeof(struct smsc911x_data)); 2450 if (!dev) { 2451 retval = -ENOMEM; 2452 goto out_release_io_1; 2453 } 2454 2455 SET_NETDEV_DEV(dev, &pdev->dev); 2456 2457 pdata = netdev_priv(dev); 2458 dev->irq = irq_res->start; 2459 irq_flags = irq_res->flags & IRQF_TRIGGER_MASK; 2460 pdata->ioaddr = ioremap_nocache(res->start, res_size); 2461 2462 pdata->dev = dev; 2463 pdata->msg_enable = ((1 << debug) - 1); 2464 2465 platform_set_drvdata(pdev, dev); 2466 2467 retval = smsc911x_request_resources(pdev); 2468 if (retval) 2469 goto out_request_resources_fail; 2470 2471 retval = smsc911x_enable_resources(pdev); 2472 if (retval) 2473 goto out_enable_resources_fail; 2474 2475 if (pdata->ioaddr == NULL) { 2476 SMSC_WARN(pdata, probe, "Error smsc911x base address invalid"); 2477 retval = -ENOMEM; 2478 goto out_disable_resources; 2479 } 2480 2481 retval = smsc911x_probe_config_dt(&pdata->config, np); 2482 if (retval && config) { 2483 /* copy config parameters across to pdata */ 2484 memcpy(&pdata->config, config, sizeof(pdata->config)); 2485 retval = 0; 2486 } 2487 2488 if (retval) { 2489 SMSC_WARN(pdata, probe, "Error smsc911x config not found"); 2490 goto out_disable_resources; 2491 } 2492 2493 /* assume standard, non-shifted, access to HW registers */ 2494 pdata->ops = &standard_smsc911x_ops; 2495 /* apply the right access if shifting is needed */ 2496 if (pdata->config.shift) 2497 pdata->ops = &shifted_smsc911x_ops; 2498 2499 pm_runtime_enable(&pdev->dev); 2500 pm_runtime_get_sync(&pdev->dev); 2501 2502 retval = smsc911x_init(dev); 2503 if (retval < 0) 2504 goto out_disable_resources; 2505 2506 /* configure irq polarity and type before connecting isr */ 2507 if (pdata->config.irq_polarity == SMSC911X_IRQ_POLARITY_ACTIVE_HIGH) 2508 intcfg |= INT_CFG_IRQ_POL_; 2509 2510 if (pdata->config.irq_type == SMSC911X_IRQ_TYPE_PUSH_PULL) 2511 intcfg |= INT_CFG_IRQ_TYPE_; 2512 2513 smsc911x_reg_write(pdata, INT_CFG, intcfg); 2514 2515 /* Ensure interrupts are globally disabled before connecting ISR */ 2516 smsc911x_disable_irq_chip(dev); 2517 2518 retval = request_irq(dev->irq, smsc911x_irqhandler, 2519 irq_flags | IRQF_SHARED, dev->name, dev); 2520 if (retval) { 2521 SMSC_WARN(pdata, probe, 2522 "Unable to claim requested irq: %d", dev->irq); 2523 goto out_disable_resources; 2524 } 2525 2526 netif_carrier_off(dev); 2527 2528 retval = register_netdev(dev); 2529 if (retval) { 2530 SMSC_WARN(pdata, probe, "Error %i registering device", retval); 2531 goto out_free_irq; 2532 } else { 2533 SMSC_TRACE(pdata, probe, 2534 "Network interface: \"%s\"", dev->name); 2535 } 2536 2537 retval = smsc911x_mii_init(pdev, dev); 2538 if (retval) { 2539 SMSC_WARN(pdata, probe, "Error %i initialising mii", retval); 2540 goto out_unregister_netdev_5; 2541 } 2542 2543 spin_lock_irq(&pdata->mac_lock); 2544 2545 /* Check if mac address has been specified when bringing interface up */ 2546 if (is_valid_ether_addr(dev->dev_addr)) { 2547 smsc911x_set_hw_mac_address(pdata, dev->dev_addr); 2548 SMSC_TRACE(pdata, probe, 2549 "MAC Address is specified by configuration"); 2550 } else if (is_valid_ether_addr(pdata->config.mac)) { 2551 memcpy(dev->dev_addr, pdata->config.mac, ETH_ALEN); 2552 SMSC_TRACE(pdata, probe, 2553 "MAC Address specified by platform data"); 2554 } else { 2555 /* Try reading mac address from device. if EEPROM is present 2556 * it will already have been set */ 2557 smsc_get_mac(dev); 2558 2559 if (is_valid_ether_addr(dev->dev_addr)) { 2560 /* eeprom values are valid so use them */ 2561 SMSC_TRACE(pdata, probe, 2562 "Mac Address is read from LAN911x EEPROM"); 2563 } else { 2564 /* eeprom values are invalid, generate random MAC */ 2565 eth_hw_addr_random(dev); 2566 smsc911x_set_hw_mac_address(pdata, dev->dev_addr); 2567 SMSC_TRACE(pdata, probe, 2568 "MAC Address is set to eth_random_addr"); 2569 } 2570 } 2571 2572 spin_unlock_irq(&pdata->mac_lock); 2573 2574 netdev_info(dev, "MAC Address: %pM\n", dev->dev_addr); 2575 2576 return 0; 2577 2578 out_unregister_netdev_5: 2579 unregister_netdev(dev); 2580 out_free_irq: 2581 free_irq(dev->irq, dev); 2582 out_disable_resources: 2583 pm_runtime_put(&pdev->dev); 2584 pm_runtime_disable(&pdev->dev); 2585 (void)smsc911x_disable_resources(pdev); 2586 out_enable_resources_fail: 2587 smsc911x_free_resources(pdev); 2588 out_request_resources_fail: 2589 iounmap(pdata->ioaddr); 2590 free_netdev(dev); 2591 out_release_io_1: 2592 release_mem_region(res->start, resource_size(res)); 2593 out_0: 2594 return retval; 2595 } 2596 2597 #ifdef CONFIG_PM 2598 /* This implementation assumes the devices remains powered on its VDDVARIO 2599 * pins during suspend. */ 2600 2601 /* TODO: implement freeze/thaw callbacks for hibernation.*/ 2602 2603 static int smsc911x_suspend(struct device *dev) 2604 { 2605 struct net_device *ndev = dev_get_drvdata(dev); 2606 struct smsc911x_data *pdata = netdev_priv(ndev); 2607 2608 /* enable wake on LAN, energy detection and the external PME 2609 * signal. */ 2610 smsc911x_reg_write(pdata, PMT_CTRL, 2611 PMT_CTRL_PM_MODE_D1_ | PMT_CTRL_WOL_EN_ | 2612 PMT_CTRL_ED_EN_ | PMT_CTRL_PME_EN_); 2613 2614 return 0; 2615 } 2616 2617 static int smsc911x_resume(struct device *dev) 2618 { 2619 struct net_device *ndev = dev_get_drvdata(dev); 2620 struct smsc911x_data *pdata = netdev_priv(ndev); 2621 unsigned int to = 100; 2622 2623 /* Note 3.11 from the datasheet: 2624 * "When the LAN9220 is in a power saving state, a write of any 2625 * data to the BYTE_TEST register will wake-up the device." 2626 */ 2627 smsc911x_reg_write(pdata, BYTE_TEST, 0); 2628 2629 /* poll the READY bit in PMT_CTRL. Any other access to the device is 2630 * forbidden while this bit isn't set. Try for 100ms and return -EIO 2631 * if it failed. */ 2632 while (!(smsc911x_reg_read(pdata, PMT_CTRL) & PMT_CTRL_READY_) && --to) 2633 udelay(1000); 2634 2635 return (to == 0) ? -EIO : 0; 2636 } 2637 2638 static const struct dev_pm_ops smsc911x_pm_ops = { 2639 .suspend = smsc911x_suspend, 2640 .resume = smsc911x_resume, 2641 }; 2642 2643 #define SMSC911X_PM_OPS (&smsc911x_pm_ops) 2644 2645 #else 2646 #define SMSC911X_PM_OPS NULL 2647 #endif 2648 2649 #ifdef CONFIG_OF 2650 static const struct of_device_id smsc911x_dt_ids[] = { 2651 { .compatible = "smsc,lan9115", }, 2652 { /* sentinel */ } 2653 }; 2654 MODULE_DEVICE_TABLE(of, smsc911x_dt_ids); 2655 #endif 2656 2657 static struct platform_driver smsc911x_driver = { 2658 .probe = smsc911x_drv_probe, 2659 .remove = smsc911x_drv_remove, 2660 .driver = { 2661 .name = SMSC_CHIPNAME, 2662 .pm = SMSC911X_PM_OPS, 2663 .of_match_table = of_match_ptr(smsc911x_dt_ids), 2664 }, 2665 }; 2666 2667 /* Entry point for loading the module */ 2668 static int __init smsc911x_init_module(void) 2669 { 2670 SMSC_INITIALIZE(); 2671 return platform_driver_register(&smsc911x_driver); 2672 } 2673 2674 /* entry point for unloading the module */ 2675 static void __exit smsc911x_cleanup_module(void) 2676 { 2677 platform_driver_unregister(&smsc911x_driver); 2678 } 2679 2680 module_init(smsc911x_init_module); 2681 module_exit(smsc911x_cleanup_module); 2682