1 /*====================================================================== 2 3 A PCMCIA ethernet driver for SMC91c92-based cards. 4 5 This driver supports Megahertz PCMCIA ethernet cards; and 6 Megahertz, Motorola, Ositech, and Psion Dacom ethernet/modem 7 multifunction cards. 8 9 Copyright (C) 1999 David A. Hinds -- dahinds@users.sourceforge.net 10 11 smc91c92_cs.c 1.122 2002/10/25 06:26:39 12 13 This driver contains code written by Donald Becker 14 (becker@scyld.com), Rowan Hughes (x-csrdh@jcu.edu.au), 15 David Hinds (dahinds@users.sourceforge.net), and Erik Stahlman 16 (erik@vt.edu). Donald wrote the SMC 91c92 code using parts of 17 Erik's SMC 91c94 driver. Rowan wrote a similar driver, and I've 18 incorporated some parts of his driver here. I (Dave) wrote most 19 of the PCMCIA glue code, and the Ositech support code. Kelly 20 Stephens (kstephen@holli.com) added support for the Motorola 21 Mariner, with help from Allen Brost. 22 23 This software may be used and distributed according to the terms of 24 the GNU General Public License, incorporated herein by reference. 25 26 ======================================================================*/ 27 28 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 29 30 #include <linux/module.h> 31 #include <linux/kernel.h> 32 #include <linux/slab.h> 33 #include <linux/string.h> 34 #include <linux/timer.h> 35 #include <linux/interrupt.h> 36 #include <linux/delay.h> 37 #include <linux/crc32.h> 38 #include <linux/netdevice.h> 39 #include <linux/etherdevice.h> 40 #include <linux/skbuff.h> 41 #include <linux/if_arp.h> 42 #include <linux/ioport.h> 43 #include <linux/ethtool.h> 44 #include <linux/mii.h> 45 #include <linux/jiffies.h> 46 #include <linux/firmware.h> 47 48 #include <pcmcia/cistpl.h> 49 #include <pcmcia/cisreg.h> 50 #include <pcmcia/ciscode.h> 51 #include <pcmcia/ds.h> 52 #include <pcmcia/ss.h> 53 54 #include <asm/io.h> 55 #include <asm/uaccess.h> 56 57 /*====================================================================*/ 58 59 static const char *if_names[] = { "auto", "10baseT", "10base2"}; 60 61 /* Firmware name */ 62 #define FIRMWARE_NAME "ositech/Xilinx7OD.bin" 63 64 /* Module parameters */ 65 66 MODULE_DESCRIPTION("SMC 91c92 series PCMCIA ethernet driver"); 67 MODULE_LICENSE("GPL"); 68 MODULE_FIRMWARE(FIRMWARE_NAME); 69 70 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0) 71 72 /* 73 Transceiver/media type. 74 0 = auto 75 1 = 10baseT (and autoselect if #define AUTOSELECT), 76 2 = AUI/10base2, 77 */ 78 INT_MODULE_PARM(if_port, 0); 79 80 81 #define DRV_NAME "smc91c92_cs" 82 #define DRV_VERSION "1.123" 83 84 /*====================================================================*/ 85 86 /* Operational parameter that usually are not changed. */ 87 88 /* Time in jiffies before concluding Tx hung */ 89 #define TX_TIMEOUT ((400*HZ)/1000) 90 91 /* Maximum events (Rx packets, etc.) to handle at each interrupt. */ 92 #define INTR_WORK 4 93 94 /* Times to check the check the chip before concluding that it doesn't 95 currently have room for another Tx packet. */ 96 #define MEMORY_WAIT_TIME 8 97 98 struct smc_private { 99 struct pcmcia_device *p_dev; 100 spinlock_t lock; 101 u_short manfid; 102 u_short cardid; 103 104 struct sk_buff *saved_skb; 105 int packets_waiting; 106 void __iomem *base; 107 u_short cfg; 108 struct timer_list media; 109 int watchdog, tx_err; 110 u_short media_status; 111 u_short fast_poll; 112 u_short link_status; 113 struct mii_if_info mii_if; 114 int duplex; 115 int rx_ovrn; 116 }; 117 118 /* Special definitions for Megahertz multifunction cards */ 119 #define MEGAHERTZ_ISR 0x0380 120 121 /* Special function registers for Motorola Mariner */ 122 #define MOT_LAN 0x0000 123 #define MOT_UART 0x0020 124 #define MOT_EEPROM 0x20 125 126 #define MOT_NORMAL \ 127 (COR_LEVEL_REQ | COR_FUNC_ENA | COR_ADDR_DECODE | COR_IREQ_ENA) 128 129 /* Special function registers for Ositech cards */ 130 #define OSITECH_AUI_CTL 0x0c 131 #define OSITECH_PWRDOWN 0x0d 132 #define OSITECH_RESET 0x0e 133 #define OSITECH_ISR 0x0f 134 #define OSITECH_AUI_PWR 0x0c 135 #define OSITECH_RESET_ISR 0x0e 136 137 #define OSI_AUI_PWR 0x40 138 #define OSI_LAN_PWRDOWN 0x02 139 #define OSI_MODEM_PWRDOWN 0x01 140 #define OSI_LAN_RESET 0x02 141 #define OSI_MODEM_RESET 0x01 142 143 /* Symbolic constants for the SMC91c9* series chips, from Erik Stahlman. */ 144 #define BANK_SELECT 14 /* Window select register. */ 145 #define SMC_SELECT_BANK(x) { outw(x, ioaddr + BANK_SELECT); } 146 147 /* Bank 0 registers. */ 148 #define TCR 0 /* transmit control register */ 149 #define TCR_CLEAR 0 /* do NOTHING */ 150 #define TCR_ENABLE 0x0001 /* if this is 1, we can transmit */ 151 #define TCR_PAD_EN 0x0080 /* pads short packets to 64 bytes */ 152 #define TCR_MONCSN 0x0400 /* Monitor Carrier. */ 153 #define TCR_FDUPLX 0x0800 /* Full duplex mode. */ 154 #define TCR_NORMAL TCR_ENABLE | TCR_PAD_EN 155 156 #define EPH 2 /* Ethernet Protocol Handler report. */ 157 #define EPH_TX_SUC 0x0001 158 #define EPH_SNGLCOL 0x0002 159 #define EPH_MULCOL 0x0004 160 #define EPH_LTX_MULT 0x0008 161 #define EPH_16COL 0x0010 162 #define EPH_SQET 0x0020 163 #define EPH_LTX_BRD 0x0040 164 #define EPH_TX_DEFR 0x0080 165 #define EPH_LAT_COL 0x0200 166 #define EPH_LOST_CAR 0x0400 167 #define EPH_EXC_DEF 0x0800 168 #define EPH_CTR_ROL 0x1000 169 #define EPH_RX_OVRN 0x2000 170 #define EPH_LINK_OK 0x4000 171 #define EPH_TX_UNRN 0x8000 172 #define MEMINFO 8 /* Memory Information Register */ 173 #define MEMCFG 10 /* Memory Configuration Register */ 174 175 /* Bank 1 registers. */ 176 #define CONFIG 0 177 #define CFG_MII_SELECT 0x8000 /* 91C100 only */ 178 #define CFG_NO_WAIT 0x1000 179 #define CFG_FULL_STEP 0x0400 180 #define CFG_SET_SQLCH 0x0200 181 #define CFG_AUI_SELECT 0x0100 182 #define CFG_16BIT 0x0080 183 #define CFG_DIS_LINK 0x0040 184 #define CFG_STATIC 0x0030 185 #define CFG_IRQ_SEL_1 0x0004 186 #define CFG_IRQ_SEL_0 0x0002 187 #define BASE_ADDR 2 188 #define ADDR0 4 189 #define GENERAL 10 190 #define CONTROL 12 191 #define CTL_STORE 0x0001 192 #define CTL_RELOAD 0x0002 193 #define CTL_EE_SELECT 0x0004 194 #define CTL_TE_ENABLE 0x0020 195 #define CTL_CR_ENABLE 0x0040 196 #define CTL_LE_ENABLE 0x0080 197 #define CTL_AUTO_RELEASE 0x0800 198 #define CTL_POWERDOWN 0x2000 199 200 /* Bank 2 registers. */ 201 #define MMU_CMD 0 202 #define MC_ALLOC 0x20 /* or with number of 256 byte packets */ 203 #define MC_RESET 0x40 204 #define MC_RELEASE 0x80 /* remove and release the current rx packet */ 205 #define MC_FREEPKT 0xA0 /* Release packet in PNR register */ 206 #define MC_ENQUEUE 0xC0 /* Enqueue the packet for transmit */ 207 #define PNR_ARR 2 208 #define FIFO_PORTS 4 209 #define FP_RXEMPTY 0x8000 210 #define POINTER 6 211 #define PTR_AUTO_INC 0x0040 212 #define PTR_READ 0x2000 213 #define PTR_AUTOINC 0x4000 214 #define PTR_RCV 0x8000 215 #define DATA_1 8 216 #define INTERRUPT 12 217 #define IM_RCV_INT 0x1 218 #define IM_TX_INT 0x2 219 #define IM_TX_EMPTY_INT 0x4 220 #define IM_ALLOC_INT 0x8 221 #define IM_RX_OVRN_INT 0x10 222 #define IM_EPH_INT 0x20 223 224 #define RCR 4 225 enum RxCfg { RxAllMulti = 0x0004, RxPromisc = 0x0002, 226 RxEnable = 0x0100, RxStripCRC = 0x0200}; 227 #define RCR_SOFTRESET 0x8000 /* resets the chip */ 228 #define RCR_STRIP_CRC 0x200 /* strips CRC */ 229 #define RCR_ENABLE 0x100 /* IFF this is set, we can receive packets */ 230 #define RCR_ALMUL 0x4 /* receive all multicast packets */ 231 #define RCR_PROMISC 0x2 /* enable promiscuous mode */ 232 233 /* the normal settings for the RCR register : */ 234 #define RCR_NORMAL (RCR_STRIP_CRC | RCR_ENABLE) 235 #define RCR_CLEAR 0x0 /* set it to a base state */ 236 #define COUNTER 6 237 238 /* BANK 3 -- not the same values as in smc9194! */ 239 #define MULTICAST0 0 240 #define MULTICAST2 2 241 #define MULTICAST4 4 242 #define MULTICAST6 6 243 #define MGMT 8 244 #define REVISION 0x0a 245 246 /* Transmit status bits. */ 247 #define TS_SUCCESS 0x0001 248 #define TS_16COL 0x0010 249 #define TS_LATCOL 0x0200 250 #define TS_LOSTCAR 0x0400 251 252 /* Receive status bits. */ 253 #define RS_ALGNERR 0x8000 254 #define RS_BADCRC 0x2000 255 #define RS_ODDFRAME 0x1000 256 #define RS_TOOLONG 0x0800 257 #define RS_TOOSHORT 0x0400 258 #define RS_MULTICAST 0x0001 259 #define RS_ERRORS (RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT) 260 261 #define set_bits(v, p) outw(inw(p)|(v), (p)) 262 #define mask_bits(v, p) outw(inw(p)&(v), (p)) 263 264 /*====================================================================*/ 265 266 static void smc91c92_detach(struct pcmcia_device *p_dev); 267 static int smc91c92_config(struct pcmcia_device *link); 268 static void smc91c92_release(struct pcmcia_device *link); 269 270 static int smc_open(struct net_device *dev); 271 static int smc_close(struct net_device *dev); 272 static int smc_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); 273 static void smc_tx_timeout(struct net_device *dev); 274 static netdev_tx_t smc_start_xmit(struct sk_buff *skb, 275 struct net_device *dev); 276 static irqreturn_t smc_interrupt(int irq, void *dev_id); 277 static void smc_rx(struct net_device *dev); 278 static void set_rx_mode(struct net_device *dev); 279 static int s9k_config(struct net_device *dev, struct ifmap *map); 280 static void smc_set_xcvr(struct net_device *dev, int if_port); 281 static void smc_reset(struct net_device *dev); 282 static void media_check(u_long arg); 283 static void mdio_sync(unsigned int addr); 284 static int mdio_read(struct net_device *dev, int phy_id, int loc); 285 static void mdio_write(struct net_device *dev, int phy_id, int loc, int value); 286 static int smc_link_ok(struct net_device *dev); 287 static const struct ethtool_ops ethtool_ops; 288 289 static const struct net_device_ops smc_netdev_ops = { 290 .ndo_open = smc_open, 291 .ndo_stop = smc_close, 292 .ndo_start_xmit = smc_start_xmit, 293 .ndo_tx_timeout = smc_tx_timeout, 294 .ndo_set_config = s9k_config, 295 .ndo_set_rx_mode = set_rx_mode, 296 .ndo_do_ioctl = smc_ioctl, 297 .ndo_change_mtu = eth_change_mtu, 298 .ndo_set_mac_address = eth_mac_addr, 299 .ndo_validate_addr = eth_validate_addr, 300 }; 301 302 static int smc91c92_probe(struct pcmcia_device *link) 303 { 304 struct smc_private *smc; 305 struct net_device *dev; 306 307 dev_dbg(&link->dev, "smc91c92_attach()\n"); 308 309 /* Create new ethernet device */ 310 dev = alloc_etherdev(sizeof(struct smc_private)); 311 if (!dev) 312 return -ENOMEM; 313 smc = netdev_priv(dev); 314 smc->p_dev = link; 315 link->priv = dev; 316 317 spin_lock_init(&smc->lock); 318 319 /* The SMC91c92-specific entries in the device structure. */ 320 dev->netdev_ops = &smc_netdev_ops; 321 dev->ethtool_ops = ðtool_ops; 322 dev->watchdog_timeo = TX_TIMEOUT; 323 324 smc->mii_if.dev = dev; 325 smc->mii_if.mdio_read = mdio_read; 326 smc->mii_if.mdio_write = mdio_write; 327 smc->mii_if.phy_id_mask = 0x1f; 328 smc->mii_if.reg_num_mask = 0x1f; 329 330 return smc91c92_config(link); 331 } /* smc91c92_attach */ 332 333 static void smc91c92_detach(struct pcmcia_device *link) 334 { 335 struct net_device *dev = link->priv; 336 337 dev_dbg(&link->dev, "smc91c92_detach\n"); 338 339 unregister_netdev(dev); 340 341 smc91c92_release(link); 342 343 free_netdev(dev); 344 } /* smc91c92_detach */ 345 346 /*====================================================================*/ 347 348 static int cvt_ascii_address(struct net_device *dev, char *s) 349 { 350 int i, j, da, c; 351 352 if (strlen(s) != 12) 353 return -1; 354 for (i = 0; i < 6; i++) { 355 da = 0; 356 for (j = 0; j < 2; j++) { 357 c = *s++; 358 da <<= 4; 359 da += ((c >= '0') && (c <= '9')) ? 360 (c - '0') : ((c & 0x0f) + 9); 361 } 362 dev->dev_addr[i] = da; 363 } 364 return 0; 365 } 366 367 /*==================================================================== 368 369 Configuration stuff for Megahertz cards 370 371 mhz_3288_power() is used to power up a 3288's ethernet chip. 372 mhz_mfc_config() handles socket setup for multifunction (1144 373 and 3288) cards. mhz_setup() gets a card's hardware ethernet 374 address. 375 376 ======================================================================*/ 377 378 static int mhz_3288_power(struct pcmcia_device *link) 379 { 380 struct net_device *dev = link->priv; 381 struct smc_private *smc = netdev_priv(dev); 382 u_char tmp; 383 384 /* Read the ISR twice... */ 385 readb(smc->base+MEGAHERTZ_ISR); 386 udelay(5); 387 readb(smc->base+MEGAHERTZ_ISR); 388 389 /* Pause 200ms... */ 390 mdelay(200); 391 392 /* Now read and write the COR... */ 393 tmp = readb(smc->base + link->config_base + CISREG_COR); 394 udelay(5); 395 writeb(tmp, smc->base + link->config_base + CISREG_COR); 396 397 return 0; 398 } 399 400 static int mhz_mfc_config_check(struct pcmcia_device *p_dev, void *priv_data) 401 { 402 int k; 403 p_dev->io_lines = 16; 404 p_dev->resource[1]->start = p_dev->resource[0]->start; 405 p_dev->resource[1]->end = 8; 406 p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; 407 p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; 408 p_dev->resource[0]->end = 16; 409 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; 410 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; 411 for (k = 0; k < 0x400; k += 0x10) { 412 if (k & 0x80) 413 continue; 414 p_dev->resource[0]->start = k ^ 0x300; 415 if (!pcmcia_request_io(p_dev)) 416 return 0; 417 } 418 return -ENODEV; 419 } 420 421 static int mhz_mfc_config(struct pcmcia_device *link) 422 { 423 struct net_device *dev = link->priv; 424 struct smc_private *smc = netdev_priv(dev); 425 unsigned int offset; 426 int i; 427 428 link->config_flags |= CONF_ENABLE_SPKR | CONF_ENABLE_IRQ | 429 CONF_AUTO_SET_IO; 430 431 /* The Megahertz combo cards have modem-like CIS entries, so 432 we have to explicitly try a bunch of port combinations. */ 433 if (pcmcia_loop_config(link, mhz_mfc_config_check, NULL)) 434 return -ENODEV; 435 436 dev->base_addr = link->resource[0]->start; 437 438 /* Allocate a memory window, for accessing the ISR */ 439 link->resource[2]->flags = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; 440 link->resource[2]->start = link->resource[2]->end = 0; 441 i = pcmcia_request_window(link, link->resource[2], 0); 442 if (i != 0) 443 return -ENODEV; 444 445 smc->base = ioremap(link->resource[2]->start, 446 resource_size(link->resource[2])); 447 offset = (smc->manfid == MANFID_MOTOROLA) ? link->config_base : 0; 448 i = pcmcia_map_mem_page(link, link->resource[2], offset); 449 if ((i == 0) && 450 (smc->manfid == MANFID_MEGAHERTZ) && 451 (smc->cardid == PRODID_MEGAHERTZ_EM3288)) 452 mhz_3288_power(link); 453 454 return 0; 455 } 456 457 static int pcmcia_get_versmac(struct pcmcia_device *p_dev, 458 tuple_t *tuple, 459 void *priv) 460 { 461 struct net_device *dev = priv; 462 cisparse_t parse; 463 u8 *buf; 464 465 if (pcmcia_parse_tuple(tuple, &parse)) 466 return -EINVAL; 467 468 buf = parse.version_1.str + parse.version_1.ofs[3]; 469 470 if ((parse.version_1.ns > 3) && (cvt_ascii_address(dev, buf) == 0)) 471 return 0; 472 473 return -EINVAL; 474 }; 475 476 static int mhz_setup(struct pcmcia_device *link) 477 { 478 struct net_device *dev = link->priv; 479 size_t len; 480 u8 *buf; 481 int rc; 482 483 /* Read the station address from the CIS. It is stored as the last 484 (fourth) string in the Version 1 Version/ID tuple. */ 485 if ((link->prod_id[3]) && 486 (cvt_ascii_address(dev, link->prod_id[3]) == 0)) 487 return 0; 488 489 /* Workarounds for broken cards start here. */ 490 /* Ugh -- the EM1144 card has two VERS_1 tuples!?! */ 491 if (!pcmcia_loop_tuple(link, CISTPL_VERS_1, pcmcia_get_versmac, dev)) 492 return 0; 493 494 /* Another possibility: for the EM3288, in a special tuple */ 495 rc = -1; 496 len = pcmcia_get_tuple(link, 0x81, &buf); 497 if (buf && len >= 13) { 498 buf[12] = '\0'; 499 if (cvt_ascii_address(dev, buf) == 0) 500 rc = 0; 501 } 502 kfree(buf); 503 504 return rc; 505 }; 506 507 /*====================================================================== 508 509 Configuration stuff for the Motorola Mariner 510 511 mot_config() writes directly to the Mariner configuration 512 registers because the CIS is just bogus. 513 514 ======================================================================*/ 515 516 static void mot_config(struct pcmcia_device *link) 517 { 518 struct net_device *dev = link->priv; 519 struct smc_private *smc = netdev_priv(dev); 520 unsigned int ioaddr = dev->base_addr; 521 unsigned int iouart = link->resource[1]->start; 522 523 /* Set UART base address and force map with COR bit 1 */ 524 writeb(iouart & 0xff, smc->base + MOT_UART + CISREG_IOBASE_0); 525 writeb((iouart >> 8) & 0xff, smc->base + MOT_UART + CISREG_IOBASE_1); 526 writeb(MOT_NORMAL, smc->base + MOT_UART + CISREG_COR); 527 528 /* Set SMC base address and force map with COR bit 1 */ 529 writeb(ioaddr & 0xff, smc->base + MOT_LAN + CISREG_IOBASE_0); 530 writeb((ioaddr >> 8) & 0xff, smc->base + MOT_LAN + CISREG_IOBASE_1); 531 writeb(MOT_NORMAL, smc->base + MOT_LAN + CISREG_COR); 532 533 /* Wait for things to settle down */ 534 mdelay(100); 535 } 536 537 static int mot_setup(struct pcmcia_device *link) 538 { 539 struct net_device *dev = link->priv; 540 unsigned int ioaddr = dev->base_addr; 541 int i, wait, loop; 542 u_int addr; 543 544 /* Read Ethernet address from Serial EEPROM */ 545 546 for (i = 0; i < 3; i++) { 547 SMC_SELECT_BANK(2); 548 outw(MOT_EEPROM + i, ioaddr + POINTER); 549 SMC_SELECT_BANK(1); 550 outw((CTL_RELOAD | CTL_EE_SELECT), ioaddr + CONTROL); 551 552 for (loop = wait = 0; loop < 200; loop++) { 553 udelay(10); 554 wait = ((CTL_RELOAD | CTL_STORE) & inw(ioaddr + CONTROL)); 555 if (wait == 0) break; 556 } 557 558 if (wait) 559 return -1; 560 561 addr = inw(ioaddr + GENERAL); 562 dev->dev_addr[2*i] = addr & 0xff; 563 dev->dev_addr[2*i+1] = (addr >> 8) & 0xff; 564 } 565 566 return 0; 567 } 568 569 /*====================================================================*/ 570 571 static int smc_configcheck(struct pcmcia_device *p_dev, void *priv_data) 572 { 573 p_dev->resource[0]->end = 16; 574 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; 575 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; 576 577 return pcmcia_request_io(p_dev); 578 } 579 580 static int smc_config(struct pcmcia_device *link) 581 { 582 struct net_device *dev = link->priv; 583 int i; 584 585 link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; 586 587 i = pcmcia_loop_config(link, smc_configcheck, NULL); 588 if (!i) 589 dev->base_addr = link->resource[0]->start; 590 591 return i; 592 } 593 594 595 static int smc_setup(struct pcmcia_device *link) 596 { 597 struct net_device *dev = link->priv; 598 599 /* Check for a LAN function extension tuple */ 600 if (!pcmcia_get_mac_from_cis(link, dev)) 601 return 0; 602 603 /* Try the third string in the Version 1 Version/ID tuple. */ 604 if (link->prod_id[2]) { 605 if (cvt_ascii_address(dev, link->prod_id[2]) == 0) 606 return 0; 607 } 608 return -1; 609 } 610 611 /*====================================================================*/ 612 613 static int osi_config(struct pcmcia_device *link) 614 { 615 struct net_device *dev = link->priv; 616 static const unsigned int com[4] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 }; 617 int i, j; 618 619 link->config_flags |= CONF_ENABLE_SPKR | CONF_ENABLE_IRQ; 620 link->resource[0]->end = 64; 621 link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; 622 link->resource[1]->end = 8; 623 624 /* Enable Hard Decode, LAN, Modem */ 625 link->io_lines = 16; 626 link->config_index = 0x23; 627 628 for (i = j = 0; j < 4; j++) { 629 link->resource[1]->start = com[j]; 630 i = pcmcia_request_io(link); 631 if (i == 0) 632 break; 633 } 634 if (i != 0) { 635 /* Fallback: turn off hard decode */ 636 link->config_index = 0x03; 637 link->resource[1]->end = 0; 638 i = pcmcia_request_io(link); 639 } 640 dev->base_addr = link->resource[0]->start + 0x10; 641 return i; 642 } 643 644 static int osi_load_firmware(struct pcmcia_device *link) 645 { 646 const struct firmware *fw; 647 int i, err; 648 649 err = request_firmware(&fw, FIRMWARE_NAME, &link->dev); 650 if (err) { 651 pr_err("Failed to load firmware \"%s\"\n", FIRMWARE_NAME); 652 return err; 653 } 654 655 /* Download the Seven of Diamonds firmware */ 656 for (i = 0; i < fw->size; i++) { 657 outb(fw->data[i], link->resource[0]->start + 2); 658 udelay(50); 659 } 660 release_firmware(fw); 661 return err; 662 } 663 664 static int pcmcia_osi_mac(struct pcmcia_device *p_dev, 665 tuple_t *tuple, 666 void *priv) 667 { 668 struct net_device *dev = priv; 669 int i; 670 671 if (tuple->TupleDataLen < 8) 672 return -EINVAL; 673 if (tuple->TupleData[0] != 0x04) 674 return -EINVAL; 675 for (i = 0; i < 6; i++) 676 dev->dev_addr[i] = tuple->TupleData[i+2]; 677 return 0; 678 }; 679 680 681 static int osi_setup(struct pcmcia_device *link, u_short manfid, u_short cardid) 682 { 683 struct net_device *dev = link->priv; 684 int rc; 685 686 /* Read the station address from tuple 0x90, subtuple 0x04 */ 687 if (pcmcia_loop_tuple(link, 0x90, pcmcia_osi_mac, dev)) 688 return -1; 689 690 if (((manfid == MANFID_OSITECH) && 691 (cardid == PRODID_OSITECH_SEVEN)) || 692 ((manfid == MANFID_PSION) && 693 (cardid == PRODID_PSION_NET100))) { 694 rc = osi_load_firmware(link); 695 if (rc) 696 return rc; 697 } else if (manfid == MANFID_OSITECH) { 698 /* Make sure both functions are powered up */ 699 set_bits(0x300, link->resource[0]->start + OSITECH_AUI_PWR); 700 /* Now, turn on the interrupt for both card functions */ 701 set_bits(0x300, link->resource[0]->start + OSITECH_RESET_ISR); 702 dev_dbg(&link->dev, "AUI/PWR: %4.4x RESET/ISR: %4.4x\n", 703 inw(link->resource[0]->start + OSITECH_AUI_PWR), 704 inw(link->resource[0]->start + OSITECH_RESET_ISR)); 705 } 706 return 0; 707 } 708 709 static int smc91c92_suspend(struct pcmcia_device *link) 710 { 711 struct net_device *dev = link->priv; 712 713 if (link->open) 714 netif_device_detach(dev); 715 716 return 0; 717 } 718 719 static int smc91c92_resume(struct pcmcia_device *link) 720 { 721 struct net_device *dev = link->priv; 722 struct smc_private *smc = netdev_priv(dev); 723 int i; 724 725 if ((smc->manfid == MANFID_MEGAHERTZ) && 726 (smc->cardid == PRODID_MEGAHERTZ_EM3288)) 727 mhz_3288_power(link); 728 if (smc->manfid == MANFID_MOTOROLA) 729 mot_config(link); 730 if ((smc->manfid == MANFID_OSITECH) && 731 (smc->cardid != PRODID_OSITECH_SEVEN)) { 732 /* Power up the card and enable interrupts */ 733 set_bits(0x0300, dev->base_addr-0x10+OSITECH_AUI_PWR); 734 set_bits(0x0300, dev->base_addr-0x10+OSITECH_RESET_ISR); 735 } 736 if (((smc->manfid == MANFID_OSITECH) && 737 (smc->cardid == PRODID_OSITECH_SEVEN)) || 738 ((smc->manfid == MANFID_PSION) && 739 (smc->cardid == PRODID_PSION_NET100))) { 740 i = osi_load_firmware(link); 741 if (i) { 742 netdev_err(dev, "Failed to load firmware\n"); 743 return i; 744 } 745 } 746 if (link->open) { 747 smc_reset(dev); 748 netif_device_attach(dev); 749 } 750 751 return 0; 752 } 753 754 755 /*====================================================================== 756 757 This verifies that the chip is some SMC91cXX variant, and returns 758 the revision code if successful. Otherwise, it returns -ENODEV. 759 760 ======================================================================*/ 761 762 static int check_sig(struct pcmcia_device *link) 763 { 764 struct net_device *dev = link->priv; 765 unsigned int ioaddr = dev->base_addr; 766 int width; 767 u_short s; 768 769 SMC_SELECT_BANK(1); 770 if (inw(ioaddr + BANK_SELECT) >> 8 != 0x33) { 771 /* Try powering up the chip */ 772 outw(0, ioaddr + CONTROL); 773 mdelay(55); 774 } 775 776 /* Try setting bus width */ 777 width = (link->resource[0]->flags == IO_DATA_PATH_WIDTH_AUTO); 778 s = inb(ioaddr + CONFIG); 779 if (width) 780 s |= CFG_16BIT; 781 else 782 s &= ~CFG_16BIT; 783 outb(s, ioaddr + CONFIG); 784 785 /* Check Base Address Register to make sure bus width is OK */ 786 s = inw(ioaddr + BASE_ADDR); 787 if ((inw(ioaddr + BANK_SELECT) >> 8 == 0x33) && 788 ((s >> 8) != (s & 0xff))) { 789 SMC_SELECT_BANK(3); 790 s = inw(ioaddr + REVISION); 791 return s & 0xff; 792 } 793 794 if (width) { 795 netdev_info(dev, "using 8-bit IO window\n"); 796 797 smc91c92_suspend(link); 798 pcmcia_fixup_iowidth(link); 799 smc91c92_resume(link); 800 return check_sig(link); 801 } 802 return -ENODEV; 803 } 804 805 static int smc91c92_config(struct pcmcia_device *link) 806 { 807 struct net_device *dev = link->priv; 808 struct smc_private *smc = netdev_priv(dev); 809 char *name; 810 int i, rev, j = 0; 811 unsigned int ioaddr; 812 u_long mir; 813 814 dev_dbg(&link->dev, "smc91c92_config\n"); 815 816 smc->manfid = link->manf_id; 817 smc->cardid = link->card_id; 818 819 if ((smc->manfid == MANFID_OSITECH) && 820 (smc->cardid != PRODID_OSITECH_SEVEN)) { 821 i = osi_config(link); 822 } else if ((smc->manfid == MANFID_MOTOROLA) || 823 ((smc->manfid == MANFID_MEGAHERTZ) && 824 ((smc->cardid == PRODID_MEGAHERTZ_VARIOUS) || 825 (smc->cardid == PRODID_MEGAHERTZ_EM3288)))) { 826 i = mhz_mfc_config(link); 827 } else { 828 i = smc_config(link); 829 } 830 if (i) 831 goto config_failed; 832 833 i = pcmcia_request_irq(link, smc_interrupt); 834 if (i) 835 goto config_failed; 836 i = pcmcia_enable_device(link); 837 if (i) 838 goto config_failed; 839 840 if (smc->manfid == MANFID_MOTOROLA) 841 mot_config(link); 842 843 dev->irq = link->irq; 844 845 if ((if_port >= 0) && (if_port <= 2)) 846 dev->if_port = if_port; 847 else 848 dev_notice(&link->dev, "invalid if_port requested\n"); 849 850 switch (smc->manfid) { 851 case MANFID_OSITECH: 852 case MANFID_PSION: 853 i = osi_setup(link, smc->manfid, smc->cardid); break; 854 case MANFID_SMC: 855 case MANFID_NEW_MEDIA: 856 i = smc_setup(link); break; 857 case 0x128: /* For broken Megahertz cards */ 858 case MANFID_MEGAHERTZ: 859 i = mhz_setup(link); break; 860 case MANFID_MOTOROLA: 861 default: /* get the hw address from EEPROM */ 862 i = mot_setup(link); break; 863 } 864 865 if (i != 0) { 866 dev_notice(&link->dev, "Unable to find hardware address.\n"); 867 goto config_failed; 868 } 869 870 smc->duplex = 0; 871 smc->rx_ovrn = 0; 872 873 rev = check_sig(link); 874 name = "???"; 875 if (rev > 0) 876 switch (rev >> 4) { 877 case 3: name = "92"; break; 878 case 4: name = ((rev & 15) >= 6) ? "96" : "94"; break; 879 case 5: name = "95"; break; 880 case 7: name = "100"; break; 881 case 8: name = "100-FD"; break; 882 case 9: name = "110"; break; 883 } 884 885 ioaddr = dev->base_addr; 886 if (rev > 0) { 887 u_long mcr; 888 SMC_SELECT_BANK(0); 889 mir = inw(ioaddr + MEMINFO) & 0xff; 890 if (mir == 0xff) mir++; 891 /* Get scale factor for memory size */ 892 mcr = ((rev >> 4) > 3) ? inw(ioaddr + MEMCFG) : 0x0200; 893 mir *= 128 * (1<<((mcr >> 9) & 7)); 894 SMC_SELECT_BANK(1); 895 smc->cfg = inw(ioaddr + CONFIG) & ~CFG_AUI_SELECT; 896 smc->cfg |= CFG_NO_WAIT | CFG_16BIT | CFG_STATIC; 897 if (smc->manfid == MANFID_OSITECH) 898 smc->cfg |= CFG_IRQ_SEL_1 | CFG_IRQ_SEL_0; 899 if ((rev >> 4) >= 7) 900 smc->cfg |= CFG_MII_SELECT; 901 } else 902 mir = 0; 903 904 if (smc->cfg & CFG_MII_SELECT) { 905 SMC_SELECT_BANK(3); 906 907 for (i = 0; i < 32; i++) { 908 j = mdio_read(dev, i, 1); 909 if ((j != 0) && (j != 0xffff)) break; 910 } 911 smc->mii_if.phy_id = (i < 32) ? i : -1; 912 913 SMC_SELECT_BANK(0); 914 } 915 916 SET_NETDEV_DEV(dev, &link->dev); 917 918 if (register_netdev(dev) != 0) { 919 dev_err(&link->dev, "register_netdev() failed\n"); 920 goto config_undo; 921 } 922 923 netdev_info(dev, "smc91c%s rev %d: io %#3lx, irq %d, hw_addr %pM\n", 924 name, (rev & 0x0f), dev->base_addr, dev->irq, dev->dev_addr); 925 926 if (rev > 0) { 927 if (mir & 0x3ff) 928 netdev_info(dev, " %lu byte", mir); 929 else 930 netdev_info(dev, " %lu kb", mir>>10); 931 pr_cont(" buffer, %s xcvr\n", 932 (smc->cfg & CFG_MII_SELECT) ? "MII" : if_names[dev->if_port]); 933 } 934 935 if (smc->cfg & CFG_MII_SELECT) { 936 if (smc->mii_if.phy_id != -1) { 937 netdev_dbg(dev, " MII transceiver at index %d, status %x\n", 938 smc->mii_if.phy_id, j); 939 } else { 940 netdev_notice(dev, " No MII transceivers found!\n"); 941 } 942 } 943 return 0; 944 945 config_undo: 946 unregister_netdev(dev); 947 config_failed: 948 smc91c92_release(link); 949 free_netdev(dev); 950 return -ENODEV; 951 } /* smc91c92_config */ 952 953 static void smc91c92_release(struct pcmcia_device *link) 954 { 955 dev_dbg(&link->dev, "smc91c92_release\n"); 956 if (link->resource[2]->end) { 957 struct net_device *dev = link->priv; 958 struct smc_private *smc = netdev_priv(dev); 959 iounmap(smc->base); 960 } 961 pcmcia_disable_device(link); 962 } 963 964 /*====================================================================== 965 966 MII interface support for SMC91cXX based cards 967 ======================================================================*/ 968 969 #define MDIO_SHIFT_CLK 0x04 970 #define MDIO_DATA_OUT 0x01 971 #define MDIO_DIR_WRITE 0x08 972 #define MDIO_DATA_WRITE0 (MDIO_DIR_WRITE) 973 #define MDIO_DATA_WRITE1 (MDIO_DIR_WRITE | MDIO_DATA_OUT) 974 #define MDIO_DATA_READ 0x02 975 976 static void mdio_sync(unsigned int addr) 977 { 978 int bits; 979 for (bits = 0; bits < 32; bits++) { 980 outb(MDIO_DATA_WRITE1, addr); 981 outb(MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, addr); 982 } 983 } 984 985 static int mdio_read(struct net_device *dev, int phy_id, int loc) 986 { 987 unsigned int addr = dev->base_addr + MGMT; 988 u_int cmd = (0x06<<10)|(phy_id<<5)|loc; 989 int i, retval = 0; 990 991 mdio_sync(addr); 992 for (i = 13; i >= 0; i--) { 993 int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0; 994 outb(dat, addr); 995 outb(dat | MDIO_SHIFT_CLK, addr); 996 } 997 for (i = 19; i > 0; i--) { 998 outb(0, addr); 999 retval = (retval << 1) | ((inb(addr) & MDIO_DATA_READ) != 0); 1000 outb(MDIO_SHIFT_CLK, addr); 1001 } 1002 return (retval>>1) & 0xffff; 1003 } 1004 1005 static void mdio_write(struct net_device *dev, int phy_id, int loc, int value) 1006 { 1007 unsigned int addr = dev->base_addr + MGMT; 1008 u_int cmd = (0x05<<28)|(phy_id<<23)|(loc<<18)|(1<<17)|value; 1009 int i; 1010 1011 mdio_sync(addr); 1012 for (i = 31; i >= 0; i--) { 1013 int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0; 1014 outb(dat, addr); 1015 outb(dat | MDIO_SHIFT_CLK, addr); 1016 } 1017 for (i = 1; i >= 0; i--) { 1018 outb(0, addr); 1019 outb(MDIO_SHIFT_CLK, addr); 1020 } 1021 } 1022 1023 /*====================================================================== 1024 1025 The driver core code, most of which should be common with a 1026 non-PCMCIA implementation. 1027 1028 ======================================================================*/ 1029 1030 #ifdef PCMCIA_DEBUG 1031 static void smc_dump(struct net_device *dev) 1032 { 1033 unsigned int ioaddr = dev->base_addr; 1034 u_short i, w, save; 1035 save = inw(ioaddr + BANK_SELECT); 1036 for (w = 0; w < 4; w++) { 1037 SMC_SELECT_BANK(w); 1038 netdev_dbg(dev, "bank %d: ", w); 1039 for (i = 0; i < 14; i += 2) 1040 pr_cont(" %04x", inw(ioaddr + i)); 1041 pr_cont("\n"); 1042 } 1043 outw(save, ioaddr + BANK_SELECT); 1044 } 1045 #endif 1046 1047 static int smc_open(struct net_device *dev) 1048 { 1049 struct smc_private *smc = netdev_priv(dev); 1050 struct pcmcia_device *link = smc->p_dev; 1051 1052 dev_dbg(&link->dev, "%s: smc_open(%p), ID/Window %4.4x.\n", 1053 dev->name, dev, inw(dev->base_addr + BANK_SELECT)); 1054 #ifdef PCMCIA_DEBUG 1055 smc_dump(dev); 1056 #endif 1057 1058 /* Check that the PCMCIA card is still here. */ 1059 if (!pcmcia_dev_present(link)) 1060 return -ENODEV; 1061 /* Physical device present signature. */ 1062 if (check_sig(link) < 0) { 1063 netdev_info(dev, "Yikes! Bad chip signature!\n"); 1064 return -ENODEV; 1065 } 1066 link->open++; 1067 1068 netif_start_queue(dev); 1069 smc->saved_skb = NULL; 1070 smc->packets_waiting = 0; 1071 1072 smc_reset(dev); 1073 setup_timer(&smc->media, media_check, (u_long)dev); 1074 mod_timer(&smc->media, jiffies + HZ); 1075 1076 return 0; 1077 } /* smc_open */ 1078 1079 /*====================================================================*/ 1080 1081 static int smc_close(struct net_device *dev) 1082 { 1083 struct smc_private *smc = netdev_priv(dev); 1084 struct pcmcia_device *link = smc->p_dev; 1085 unsigned int ioaddr = dev->base_addr; 1086 1087 dev_dbg(&link->dev, "%s: smc_close(), status %4.4x.\n", 1088 dev->name, inw(ioaddr + BANK_SELECT)); 1089 1090 netif_stop_queue(dev); 1091 1092 /* Shut off all interrupts, and turn off the Tx and Rx sections. 1093 Don't bother to check for chip present. */ 1094 SMC_SELECT_BANK(2); /* Nominally paranoia, but do no assume... */ 1095 outw(0, ioaddr + INTERRUPT); 1096 SMC_SELECT_BANK(0); 1097 mask_bits(0xff00, ioaddr + RCR); 1098 mask_bits(0xff00, ioaddr + TCR); 1099 1100 /* Put the chip into power-down mode. */ 1101 SMC_SELECT_BANK(1); 1102 outw(CTL_POWERDOWN, ioaddr + CONTROL ); 1103 1104 link->open--; 1105 del_timer_sync(&smc->media); 1106 1107 return 0; 1108 } /* smc_close */ 1109 1110 /*====================================================================== 1111 1112 Transfer a packet to the hardware and trigger the packet send. 1113 This may be called at either from either the Tx queue code 1114 or the interrupt handler. 1115 1116 ======================================================================*/ 1117 1118 static void smc_hardware_send_packet(struct net_device * dev) 1119 { 1120 struct smc_private *smc = netdev_priv(dev); 1121 struct sk_buff *skb = smc->saved_skb; 1122 unsigned int ioaddr = dev->base_addr; 1123 u_char packet_no; 1124 1125 if (!skb) { 1126 netdev_err(dev, "In XMIT with no packet to send\n"); 1127 return; 1128 } 1129 1130 /* There should be a packet slot waiting. */ 1131 packet_no = inw(ioaddr + PNR_ARR) >> 8; 1132 if (packet_no & 0x80) { 1133 /* If not, there is a hardware problem! Likely an ejected card. */ 1134 netdev_warn(dev, "hardware Tx buffer allocation failed, status %#2.2x\n", 1135 packet_no); 1136 dev_kfree_skb_irq(skb); 1137 smc->saved_skb = NULL; 1138 netif_start_queue(dev); 1139 return; 1140 } 1141 1142 dev->stats.tx_bytes += skb->len; 1143 /* The card should use the just-allocated buffer. */ 1144 outw(packet_no, ioaddr + PNR_ARR); 1145 /* point to the beginning of the packet */ 1146 outw(PTR_AUTOINC , ioaddr + POINTER); 1147 1148 /* Send the packet length (+6 for status, length and ctl byte) 1149 and the status word (set to zeros). */ 1150 { 1151 u_char *buf = skb->data; 1152 u_int length = skb->len; /* The chip will pad to ethernet min. */ 1153 1154 netdev_dbg(dev, "Trying to xmit packet of length %d\n", length); 1155 1156 /* send the packet length: +6 for status word, length, and ctl */ 1157 outw(0, ioaddr + DATA_1); 1158 outw(length + 6, ioaddr + DATA_1); 1159 outsw(ioaddr + DATA_1, buf, length >> 1); 1160 1161 /* The odd last byte, if there is one, goes in the control word. */ 1162 outw((length & 1) ? 0x2000 | buf[length-1] : 0, ioaddr + DATA_1); 1163 } 1164 1165 /* Enable the Tx interrupts, both Tx (TxErr) and TxEmpty. */ 1166 outw(((IM_TX_INT|IM_TX_EMPTY_INT)<<8) | 1167 (inw(ioaddr + INTERRUPT) & 0xff00), 1168 ioaddr + INTERRUPT); 1169 1170 /* The chip does the rest of the work. */ 1171 outw(MC_ENQUEUE , ioaddr + MMU_CMD); 1172 1173 smc->saved_skb = NULL; 1174 dev_kfree_skb_irq(skb); 1175 netif_trans_update(dev); 1176 netif_start_queue(dev); 1177 } 1178 1179 /*====================================================================*/ 1180 1181 static void smc_tx_timeout(struct net_device *dev) 1182 { 1183 struct smc_private *smc = netdev_priv(dev); 1184 unsigned int ioaddr = dev->base_addr; 1185 1186 netdev_notice(dev, "transmit timed out, Tx_status %2.2x status %4.4x.\n", 1187 inw(ioaddr)&0xff, inw(ioaddr + 2)); 1188 dev->stats.tx_errors++; 1189 smc_reset(dev); 1190 netif_trans_update(dev); /* prevent tx timeout */ 1191 smc->saved_skb = NULL; 1192 netif_wake_queue(dev); 1193 } 1194 1195 static netdev_tx_t smc_start_xmit(struct sk_buff *skb, 1196 struct net_device *dev) 1197 { 1198 struct smc_private *smc = netdev_priv(dev); 1199 unsigned int ioaddr = dev->base_addr; 1200 u_short num_pages; 1201 short time_out, ir; 1202 unsigned long flags; 1203 1204 netif_stop_queue(dev); 1205 1206 netdev_dbg(dev, "smc_start_xmit(length = %d) called, status %04x\n", 1207 skb->len, inw(ioaddr + 2)); 1208 1209 if (smc->saved_skb) { 1210 /* THIS SHOULD NEVER HAPPEN. */ 1211 dev->stats.tx_aborted_errors++; 1212 netdev_dbg(dev, "Internal error -- sent packet while busy\n"); 1213 return NETDEV_TX_BUSY; 1214 } 1215 smc->saved_skb = skb; 1216 1217 num_pages = skb->len >> 8; 1218 1219 if (num_pages > 7) { 1220 netdev_err(dev, "Far too big packet error: %d pages\n", num_pages); 1221 dev_kfree_skb (skb); 1222 smc->saved_skb = NULL; 1223 dev->stats.tx_dropped++; 1224 return NETDEV_TX_OK; /* Do not re-queue this packet. */ 1225 } 1226 /* A packet is now waiting. */ 1227 smc->packets_waiting++; 1228 1229 spin_lock_irqsave(&smc->lock, flags); 1230 SMC_SELECT_BANK(2); /* Paranoia, we should always be in window 2 */ 1231 1232 /* need MC_RESET to keep the memory consistent. errata? */ 1233 if (smc->rx_ovrn) { 1234 outw(MC_RESET, ioaddr + MMU_CMD); 1235 smc->rx_ovrn = 0; 1236 } 1237 1238 /* Allocate the memory; send the packet now if we win. */ 1239 outw(MC_ALLOC | num_pages, ioaddr + MMU_CMD); 1240 for (time_out = MEMORY_WAIT_TIME; time_out >= 0; time_out--) { 1241 ir = inw(ioaddr+INTERRUPT); 1242 if (ir & IM_ALLOC_INT) { 1243 /* Acknowledge the interrupt, send the packet. */ 1244 outw((ir&0xff00) | IM_ALLOC_INT, ioaddr + INTERRUPT); 1245 smc_hardware_send_packet(dev); /* Send the packet now.. */ 1246 spin_unlock_irqrestore(&smc->lock, flags); 1247 return NETDEV_TX_OK; 1248 } 1249 } 1250 1251 /* Otherwise defer until the Tx-space-allocated interrupt. */ 1252 netdev_dbg(dev, "memory allocation deferred.\n"); 1253 outw((IM_ALLOC_INT << 8) | (ir & 0xff00), ioaddr + INTERRUPT); 1254 spin_unlock_irqrestore(&smc->lock, flags); 1255 1256 return NETDEV_TX_OK; 1257 } 1258 1259 /*====================================================================== 1260 1261 Handle a Tx anomalous event. Entered while in Window 2. 1262 1263 ======================================================================*/ 1264 1265 static void smc_tx_err(struct net_device * dev) 1266 { 1267 struct smc_private *smc = netdev_priv(dev); 1268 unsigned int ioaddr = dev->base_addr; 1269 int saved_packet = inw(ioaddr + PNR_ARR) & 0xff; 1270 int packet_no = inw(ioaddr + FIFO_PORTS) & 0x7f; 1271 int tx_status; 1272 1273 /* select this as the packet to read from */ 1274 outw(packet_no, ioaddr + PNR_ARR); 1275 1276 /* read the first word from this packet */ 1277 outw(PTR_AUTOINC | PTR_READ | 0, ioaddr + POINTER); 1278 1279 tx_status = inw(ioaddr + DATA_1); 1280 1281 dev->stats.tx_errors++; 1282 if (tx_status & TS_LOSTCAR) dev->stats.tx_carrier_errors++; 1283 if (tx_status & TS_LATCOL) dev->stats.tx_window_errors++; 1284 if (tx_status & TS_16COL) { 1285 dev->stats.tx_aborted_errors++; 1286 smc->tx_err++; 1287 } 1288 1289 if (tx_status & TS_SUCCESS) { 1290 netdev_notice(dev, "Successful packet caused error interrupt?\n"); 1291 } 1292 /* re-enable transmit */ 1293 SMC_SELECT_BANK(0); 1294 outw(inw(ioaddr + TCR) | TCR_ENABLE | smc->duplex, ioaddr + TCR); 1295 SMC_SELECT_BANK(2); 1296 1297 outw(MC_FREEPKT, ioaddr + MMU_CMD); /* Free the packet memory. */ 1298 1299 /* one less packet waiting for me */ 1300 smc->packets_waiting--; 1301 1302 outw(saved_packet, ioaddr + PNR_ARR); 1303 } 1304 1305 /*====================================================================*/ 1306 1307 static void smc_eph_irq(struct net_device *dev) 1308 { 1309 struct smc_private *smc = netdev_priv(dev); 1310 unsigned int ioaddr = dev->base_addr; 1311 u_short card_stats, ephs; 1312 1313 SMC_SELECT_BANK(0); 1314 ephs = inw(ioaddr + EPH); 1315 netdev_dbg(dev, "Ethernet protocol handler interrupt, status %4.4x.\n", 1316 ephs); 1317 /* Could be a counter roll-over warning: update stats. */ 1318 card_stats = inw(ioaddr + COUNTER); 1319 /* single collisions */ 1320 dev->stats.collisions += card_stats & 0xF; 1321 card_stats >>= 4; 1322 /* multiple collisions */ 1323 dev->stats.collisions += card_stats & 0xF; 1324 #if 0 /* These are for when linux supports these statistics */ 1325 card_stats >>= 4; /* deferred */ 1326 card_stats >>= 4; /* excess deferred */ 1327 #endif 1328 /* If we had a transmit error we must re-enable the transmitter. */ 1329 outw(inw(ioaddr + TCR) | TCR_ENABLE | smc->duplex, ioaddr + TCR); 1330 1331 /* Clear a link error interrupt. */ 1332 SMC_SELECT_BANK(1); 1333 outw(CTL_AUTO_RELEASE | 0x0000, ioaddr + CONTROL); 1334 outw(CTL_AUTO_RELEASE | CTL_TE_ENABLE | CTL_CR_ENABLE, 1335 ioaddr + CONTROL); 1336 SMC_SELECT_BANK(2); 1337 } 1338 1339 /*====================================================================*/ 1340 1341 static irqreturn_t smc_interrupt(int irq, void *dev_id) 1342 { 1343 struct net_device *dev = dev_id; 1344 struct smc_private *smc = netdev_priv(dev); 1345 unsigned int ioaddr; 1346 u_short saved_bank, saved_pointer, mask, status; 1347 unsigned int handled = 1; 1348 char bogus_cnt = INTR_WORK; /* Work we are willing to do. */ 1349 1350 if (!netif_device_present(dev)) 1351 return IRQ_NONE; 1352 1353 ioaddr = dev->base_addr; 1354 1355 netdev_dbg(dev, "SMC91c92 interrupt %d at %#x.\n", 1356 irq, ioaddr); 1357 1358 spin_lock(&smc->lock); 1359 smc->watchdog = 0; 1360 saved_bank = inw(ioaddr + BANK_SELECT); 1361 if ((saved_bank & 0xff00) != 0x3300) { 1362 /* The device does not exist -- the card could be off-line, or 1363 maybe it has been ejected. */ 1364 netdev_dbg(dev, "SMC91c92 interrupt %d for non-existent/ejected device.\n", 1365 irq); 1366 handled = 0; 1367 goto irq_done; 1368 } 1369 1370 SMC_SELECT_BANK(2); 1371 saved_pointer = inw(ioaddr + POINTER); 1372 mask = inw(ioaddr + INTERRUPT) >> 8; 1373 /* clear all interrupts */ 1374 outw(0, ioaddr + INTERRUPT); 1375 1376 do { /* read the status flag, and mask it */ 1377 status = inw(ioaddr + INTERRUPT) & 0xff; 1378 netdev_dbg(dev, "Status is %#2.2x (mask %#2.2x).\n", 1379 status, mask); 1380 if ((status & mask) == 0) { 1381 if (bogus_cnt == INTR_WORK) 1382 handled = 0; 1383 break; 1384 } 1385 if (status & IM_RCV_INT) { 1386 /* Got a packet(s). */ 1387 smc_rx(dev); 1388 } 1389 if (status & IM_TX_INT) { 1390 smc_tx_err(dev); 1391 outw(IM_TX_INT, ioaddr + INTERRUPT); 1392 } 1393 status &= mask; 1394 if (status & IM_TX_EMPTY_INT) { 1395 outw(IM_TX_EMPTY_INT, ioaddr + INTERRUPT); 1396 mask &= ~IM_TX_EMPTY_INT; 1397 dev->stats.tx_packets += smc->packets_waiting; 1398 smc->packets_waiting = 0; 1399 } 1400 if (status & IM_ALLOC_INT) { 1401 /* Clear this interrupt so it doesn't happen again */ 1402 mask &= ~IM_ALLOC_INT; 1403 1404 smc_hardware_send_packet(dev); 1405 1406 /* enable xmit interrupts based on this */ 1407 mask |= (IM_TX_EMPTY_INT | IM_TX_INT); 1408 1409 /* and let the card send more packets to me */ 1410 netif_wake_queue(dev); 1411 } 1412 if (status & IM_RX_OVRN_INT) { 1413 dev->stats.rx_errors++; 1414 dev->stats.rx_fifo_errors++; 1415 if (smc->duplex) 1416 smc->rx_ovrn = 1; /* need MC_RESET outside smc_interrupt */ 1417 outw(IM_RX_OVRN_INT, ioaddr + INTERRUPT); 1418 } 1419 if (status & IM_EPH_INT) 1420 smc_eph_irq(dev); 1421 } while (--bogus_cnt); 1422 1423 netdev_dbg(dev, " Restoring saved registers mask %2.2x bank %4.4x pointer %4.4x.\n", 1424 mask, saved_bank, saved_pointer); 1425 1426 /* restore state register */ 1427 outw((mask<<8), ioaddr + INTERRUPT); 1428 outw(saved_pointer, ioaddr + POINTER); 1429 SMC_SELECT_BANK(saved_bank); 1430 1431 netdev_dbg(dev, "Exiting interrupt IRQ%d.\n", irq); 1432 1433 irq_done: 1434 1435 if ((smc->manfid == MANFID_OSITECH) && 1436 (smc->cardid != PRODID_OSITECH_SEVEN)) { 1437 /* Retrigger interrupt if needed */ 1438 mask_bits(0x00ff, ioaddr-0x10+OSITECH_RESET_ISR); 1439 set_bits(0x0300, ioaddr-0x10+OSITECH_RESET_ISR); 1440 } 1441 if (smc->manfid == MANFID_MOTOROLA) { 1442 u_char cor; 1443 cor = readb(smc->base + MOT_UART + CISREG_COR); 1444 writeb(cor & ~COR_IREQ_ENA, smc->base + MOT_UART + CISREG_COR); 1445 writeb(cor, smc->base + MOT_UART + CISREG_COR); 1446 cor = readb(smc->base + MOT_LAN + CISREG_COR); 1447 writeb(cor & ~COR_IREQ_ENA, smc->base + MOT_LAN + CISREG_COR); 1448 writeb(cor, smc->base + MOT_LAN + CISREG_COR); 1449 } 1450 1451 if ((smc->base != NULL) && /* Megahertz MFC's */ 1452 (smc->manfid == MANFID_MEGAHERTZ) && 1453 (smc->cardid == PRODID_MEGAHERTZ_EM3288)) { 1454 1455 u_char tmp; 1456 tmp = readb(smc->base+MEGAHERTZ_ISR); 1457 tmp = readb(smc->base+MEGAHERTZ_ISR); 1458 1459 /* Retrigger interrupt if needed */ 1460 writeb(tmp, smc->base + MEGAHERTZ_ISR); 1461 writeb(tmp, smc->base + MEGAHERTZ_ISR); 1462 } 1463 1464 spin_unlock(&smc->lock); 1465 return IRQ_RETVAL(handled); 1466 } 1467 1468 /*====================================================================*/ 1469 1470 static void smc_rx(struct net_device *dev) 1471 { 1472 unsigned int ioaddr = dev->base_addr; 1473 int rx_status; 1474 int packet_length; /* Caution: not frame length, rather words 1475 to transfer from the chip. */ 1476 1477 /* Assertion: we are in Window 2. */ 1478 1479 if (inw(ioaddr + FIFO_PORTS) & FP_RXEMPTY) { 1480 netdev_err(dev, "smc_rx() with nothing on Rx FIFO\n"); 1481 return; 1482 } 1483 1484 /* Reset the read pointer, and read the status and packet length. */ 1485 outw(PTR_READ | PTR_RCV | PTR_AUTOINC, ioaddr + POINTER); 1486 rx_status = inw(ioaddr + DATA_1); 1487 packet_length = inw(ioaddr + DATA_1) & 0x07ff; 1488 1489 netdev_dbg(dev, "Receive status %4.4x length %d.\n", 1490 rx_status, packet_length); 1491 1492 if (!(rx_status & RS_ERRORS)) { 1493 /* do stuff to make a new packet */ 1494 struct sk_buff *skb; 1495 1496 /* Note: packet_length adds 5 or 6 extra bytes here! */ 1497 skb = netdev_alloc_skb(dev, packet_length+2); 1498 1499 if (skb == NULL) { 1500 netdev_dbg(dev, "Low memory, packet dropped.\n"); 1501 dev->stats.rx_dropped++; 1502 outw(MC_RELEASE, ioaddr + MMU_CMD); 1503 return; 1504 } 1505 1506 packet_length -= (rx_status & RS_ODDFRAME ? 5 : 6); 1507 skb_reserve(skb, 2); 1508 insw(ioaddr+DATA_1, skb_put(skb, packet_length), 1509 (packet_length+1)>>1); 1510 skb->protocol = eth_type_trans(skb, dev); 1511 1512 netif_rx(skb); 1513 dev->last_rx = jiffies; 1514 dev->stats.rx_packets++; 1515 dev->stats.rx_bytes += packet_length; 1516 if (rx_status & RS_MULTICAST) 1517 dev->stats.multicast++; 1518 } else { 1519 /* error ... */ 1520 dev->stats.rx_errors++; 1521 1522 if (rx_status & RS_ALGNERR) dev->stats.rx_frame_errors++; 1523 if (rx_status & (RS_TOOSHORT | RS_TOOLONG)) 1524 dev->stats.rx_length_errors++; 1525 if (rx_status & RS_BADCRC) dev->stats.rx_crc_errors++; 1526 } 1527 /* Let the MMU free the memory of this packet. */ 1528 outw(MC_RELEASE, ioaddr + MMU_CMD); 1529 } 1530 1531 /*====================================================================== 1532 1533 Set the receive mode. 1534 1535 This routine is used by both the protocol level to notify us of 1536 promiscuous/multicast mode changes, and by the open/reset code to 1537 initialize the Rx registers. We always set the multicast list and 1538 leave the receiver running. 1539 1540 ======================================================================*/ 1541 1542 static void set_rx_mode(struct net_device *dev) 1543 { 1544 unsigned int ioaddr = dev->base_addr; 1545 struct smc_private *smc = netdev_priv(dev); 1546 unsigned char multicast_table[8]; 1547 unsigned long flags; 1548 u_short rx_cfg_setting; 1549 int i; 1550 1551 memset(multicast_table, 0, sizeof(multicast_table)); 1552 1553 if (dev->flags & IFF_PROMISC) { 1554 rx_cfg_setting = RxStripCRC | RxEnable | RxPromisc | RxAllMulti; 1555 } else if (dev->flags & IFF_ALLMULTI) 1556 rx_cfg_setting = RxStripCRC | RxEnable | RxAllMulti; 1557 else { 1558 if (!netdev_mc_empty(dev)) { 1559 struct netdev_hw_addr *ha; 1560 1561 netdev_for_each_mc_addr(ha, dev) { 1562 u_int position = ether_crc(6, ha->addr); 1563 multicast_table[position >> 29] |= 1 << ((position >> 26) & 7); 1564 } 1565 } 1566 rx_cfg_setting = RxStripCRC | RxEnable; 1567 } 1568 1569 /* Load MC table and Rx setting into the chip without interrupts. */ 1570 spin_lock_irqsave(&smc->lock, flags); 1571 SMC_SELECT_BANK(3); 1572 for (i = 0; i < 8; i++) 1573 outb(multicast_table[i], ioaddr + MULTICAST0 + i); 1574 SMC_SELECT_BANK(0); 1575 outw(rx_cfg_setting, ioaddr + RCR); 1576 SMC_SELECT_BANK(2); 1577 spin_unlock_irqrestore(&smc->lock, flags); 1578 } 1579 1580 /*====================================================================== 1581 1582 Senses when a card's config changes. Here, it's coax or TP. 1583 1584 ======================================================================*/ 1585 1586 static int s9k_config(struct net_device *dev, struct ifmap *map) 1587 { 1588 struct smc_private *smc = netdev_priv(dev); 1589 if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) { 1590 if (smc->cfg & CFG_MII_SELECT) 1591 return -EOPNOTSUPP; 1592 else if (map->port > 2) 1593 return -EINVAL; 1594 dev->if_port = map->port; 1595 netdev_info(dev, "switched to %s port\n", if_names[dev->if_port]); 1596 smc_reset(dev); 1597 } 1598 return 0; 1599 } 1600 1601 /*====================================================================== 1602 1603 Reset the chip, reloading every register that might be corrupted. 1604 1605 ======================================================================*/ 1606 1607 /* 1608 Set transceiver type, perhaps to something other than what the user 1609 specified in dev->if_port. 1610 */ 1611 static void smc_set_xcvr(struct net_device *dev, int if_port) 1612 { 1613 struct smc_private *smc = netdev_priv(dev); 1614 unsigned int ioaddr = dev->base_addr; 1615 u_short saved_bank; 1616 1617 saved_bank = inw(ioaddr + BANK_SELECT); 1618 SMC_SELECT_BANK(1); 1619 if (if_port == 2) { 1620 outw(smc->cfg | CFG_AUI_SELECT, ioaddr + CONFIG); 1621 if ((smc->manfid == MANFID_OSITECH) && 1622 (smc->cardid != PRODID_OSITECH_SEVEN)) 1623 set_bits(OSI_AUI_PWR, ioaddr - 0x10 + OSITECH_AUI_PWR); 1624 smc->media_status = ((dev->if_port == 0) ? 0x0001 : 0x0002); 1625 } else { 1626 outw(smc->cfg, ioaddr + CONFIG); 1627 if ((smc->manfid == MANFID_OSITECH) && 1628 (smc->cardid != PRODID_OSITECH_SEVEN)) 1629 mask_bits(~OSI_AUI_PWR, ioaddr - 0x10 + OSITECH_AUI_PWR); 1630 smc->media_status = ((dev->if_port == 0) ? 0x0012 : 0x4001); 1631 } 1632 SMC_SELECT_BANK(saved_bank); 1633 } 1634 1635 static void smc_reset(struct net_device *dev) 1636 { 1637 unsigned int ioaddr = dev->base_addr; 1638 struct smc_private *smc = netdev_priv(dev); 1639 int i; 1640 1641 netdev_dbg(dev, "smc91c92 reset called.\n"); 1642 1643 /* The first interaction must be a write to bring the chip out 1644 of sleep mode. */ 1645 SMC_SELECT_BANK(0); 1646 /* Reset the chip. */ 1647 outw(RCR_SOFTRESET, ioaddr + RCR); 1648 udelay(10); 1649 1650 /* Clear the transmit and receive configuration registers. */ 1651 outw(RCR_CLEAR, ioaddr + RCR); 1652 outw(TCR_CLEAR, ioaddr + TCR); 1653 1654 /* Set the Window 1 control, configuration and station addr registers. 1655 No point in writing the I/O base register ;-> */ 1656 SMC_SELECT_BANK(1); 1657 /* Automatically release successfully transmitted packets, 1658 Accept link errors, counter and Tx error interrupts. */ 1659 outw(CTL_AUTO_RELEASE | CTL_TE_ENABLE | CTL_CR_ENABLE, 1660 ioaddr + CONTROL); 1661 smc_set_xcvr(dev, dev->if_port); 1662 if ((smc->manfid == MANFID_OSITECH) && 1663 (smc->cardid != PRODID_OSITECH_SEVEN)) 1664 outw((dev->if_port == 2 ? OSI_AUI_PWR : 0) | 1665 (inw(ioaddr-0x10+OSITECH_AUI_PWR) & 0xff00), 1666 ioaddr - 0x10 + OSITECH_AUI_PWR); 1667 1668 /* Fill in the physical address. The databook is wrong about the order! */ 1669 for (i = 0; i < 6; i += 2) 1670 outw((dev->dev_addr[i+1]<<8)+dev->dev_addr[i], 1671 ioaddr + ADDR0 + i); 1672 1673 /* Reset the MMU */ 1674 SMC_SELECT_BANK(2); 1675 outw(MC_RESET, ioaddr + MMU_CMD); 1676 outw(0, ioaddr + INTERRUPT); 1677 1678 /* Re-enable the chip. */ 1679 SMC_SELECT_BANK(0); 1680 outw(((smc->cfg & CFG_MII_SELECT) ? 0 : TCR_MONCSN) | 1681 TCR_ENABLE | TCR_PAD_EN | smc->duplex, ioaddr + TCR); 1682 set_rx_mode(dev); 1683 1684 if (smc->cfg & CFG_MII_SELECT) { 1685 SMC_SELECT_BANK(3); 1686 1687 /* Reset MII */ 1688 mdio_write(dev, smc->mii_if.phy_id, 0, 0x8000); 1689 1690 /* Advertise 100F, 100H, 10F, 10H */ 1691 mdio_write(dev, smc->mii_if.phy_id, 4, 0x01e1); 1692 1693 /* Restart MII autonegotiation */ 1694 mdio_write(dev, smc->mii_if.phy_id, 0, 0x0000); 1695 mdio_write(dev, smc->mii_if.phy_id, 0, 0x1200); 1696 } 1697 1698 /* Enable interrupts. */ 1699 SMC_SELECT_BANK(2); 1700 outw((IM_EPH_INT | IM_RX_OVRN_INT | IM_RCV_INT) << 8, 1701 ioaddr + INTERRUPT); 1702 } 1703 1704 /*====================================================================== 1705 1706 Media selection timer routine 1707 1708 ======================================================================*/ 1709 1710 static void media_check(u_long arg) 1711 { 1712 struct net_device *dev = (struct net_device *) arg; 1713 struct smc_private *smc = netdev_priv(dev); 1714 unsigned int ioaddr = dev->base_addr; 1715 u_short i, media, saved_bank; 1716 u_short link; 1717 unsigned long flags; 1718 1719 spin_lock_irqsave(&smc->lock, flags); 1720 1721 saved_bank = inw(ioaddr + BANK_SELECT); 1722 1723 if (!netif_device_present(dev)) 1724 goto reschedule; 1725 1726 SMC_SELECT_BANK(2); 1727 1728 /* need MC_RESET to keep the memory consistent. errata? */ 1729 if (smc->rx_ovrn) { 1730 outw(MC_RESET, ioaddr + MMU_CMD); 1731 smc->rx_ovrn = 0; 1732 } 1733 i = inw(ioaddr + INTERRUPT); 1734 SMC_SELECT_BANK(0); 1735 media = inw(ioaddr + EPH) & EPH_LINK_OK; 1736 SMC_SELECT_BANK(1); 1737 media |= (inw(ioaddr + CONFIG) & CFG_AUI_SELECT) ? 2 : 1; 1738 1739 SMC_SELECT_BANK(saved_bank); 1740 spin_unlock_irqrestore(&smc->lock, flags); 1741 1742 /* Check for pending interrupt with watchdog flag set: with 1743 this, we can limp along even if the interrupt is blocked */ 1744 if (smc->watchdog++ && ((i>>8) & i)) { 1745 if (!smc->fast_poll) 1746 netdev_info(dev, "interrupt(s) dropped!\n"); 1747 local_irq_save(flags); 1748 smc_interrupt(dev->irq, dev); 1749 local_irq_restore(flags); 1750 smc->fast_poll = HZ; 1751 } 1752 if (smc->fast_poll) { 1753 smc->fast_poll--; 1754 smc->media.expires = jiffies + HZ/100; 1755 add_timer(&smc->media); 1756 return; 1757 } 1758 1759 spin_lock_irqsave(&smc->lock, flags); 1760 1761 saved_bank = inw(ioaddr + BANK_SELECT); 1762 1763 if (smc->cfg & CFG_MII_SELECT) { 1764 if (smc->mii_if.phy_id < 0) 1765 goto reschedule; 1766 1767 SMC_SELECT_BANK(3); 1768 link = mdio_read(dev, smc->mii_if.phy_id, 1); 1769 if (!link || (link == 0xffff)) { 1770 netdev_info(dev, "MII is missing!\n"); 1771 smc->mii_if.phy_id = -1; 1772 goto reschedule; 1773 } 1774 1775 link &= 0x0004; 1776 if (link != smc->link_status) { 1777 u_short p = mdio_read(dev, smc->mii_if.phy_id, 5); 1778 netdev_info(dev, "%s link beat\n", link ? "found" : "lost"); 1779 smc->duplex = (((p & 0x0100) || ((p & 0x1c0) == 0x40)) 1780 ? TCR_FDUPLX : 0); 1781 if (link) { 1782 netdev_info(dev, "autonegotiation complete: " 1783 "%dbaseT-%cD selected\n", 1784 (p & 0x0180) ? 100 : 10, smc->duplex ? 'F' : 'H'); 1785 } 1786 SMC_SELECT_BANK(0); 1787 outw(inw(ioaddr + TCR) | smc->duplex, ioaddr + TCR); 1788 smc->link_status = link; 1789 } 1790 goto reschedule; 1791 } 1792 1793 /* Ignore collisions unless we've had no rx's recently */ 1794 if (time_after(jiffies, dev->last_rx + HZ)) { 1795 if (smc->tx_err || (smc->media_status & EPH_16COL)) 1796 media |= EPH_16COL; 1797 } 1798 smc->tx_err = 0; 1799 1800 if (media != smc->media_status) { 1801 if ((media & smc->media_status & 1) && 1802 ((smc->media_status ^ media) & EPH_LINK_OK)) 1803 netdev_info(dev, "%s link beat\n", 1804 smc->media_status & EPH_LINK_OK ? "lost" : "found"); 1805 else if ((media & smc->media_status & 2) && 1806 ((smc->media_status ^ media) & EPH_16COL)) 1807 netdev_info(dev, "coax cable %s\n", 1808 media & EPH_16COL ? "problem" : "ok"); 1809 if (dev->if_port == 0) { 1810 if (media & 1) { 1811 if (media & EPH_LINK_OK) 1812 netdev_info(dev, "flipped to 10baseT\n"); 1813 else 1814 smc_set_xcvr(dev, 2); 1815 } else { 1816 if (media & EPH_16COL) 1817 smc_set_xcvr(dev, 1); 1818 else 1819 netdev_info(dev, "flipped to 10base2\n"); 1820 } 1821 } 1822 smc->media_status = media; 1823 } 1824 1825 reschedule: 1826 smc->media.expires = jiffies + HZ; 1827 add_timer(&smc->media); 1828 SMC_SELECT_BANK(saved_bank); 1829 spin_unlock_irqrestore(&smc->lock, flags); 1830 } 1831 1832 static int smc_link_ok(struct net_device *dev) 1833 { 1834 unsigned int ioaddr = dev->base_addr; 1835 struct smc_private *smc = netdev_priv(dev); 1836 1837 if (smc->cfg & CFG_MII_SELECT) { 1838 return mii_link_ok(&smc->mii_if); 1839 } else { 1840 SMC_SELECT_BANK(0); 1841 return inw(ioaddr + EPH) & EPH_LINK_OK; 1842 } 1843 } 1844 1845 static int smc_netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd) 1846 { 1847 u16 tmp; 1848 unsigned int ioaddr = dev->base_addr; 1849 1850 ecmd->supported = (SUPPORTED_TP | SUPPORTED_AUI | 1851 SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full); 1852 1853 SMC_SELECT_BANK(1); 1854 tmp = inw(ioaddr + CONFIG); 1855 ecmd->port = (tmp & CFG_AUI_SELECT) ? PORT_AUI : PORT_TP; 1856 ecmd->transceiver = XCVR_INTERNAL; 1857 ethtool_cmd_speed_set(ecmd, SPEED_10); 1858 ecmd->phy_address = ioaddr + MGMT; 1859 1860 SMC_SELECT_BANK(0); 1861 tmp = inw(ioaddr + TCR); 1862 ecmd->duplex = (tmp & TCR_FDUPLX) ? DUPLEX_FULL : DUPLEX_HALF; 1863 1864 return 0; 1865 } 1866 1867 static int smc_netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd) 1868 { 1869 u16 tmp; 1870 unsigned int ioaddr = dev->base_addr; 1871 1872 if (ethtool_cmd_speed(ecmd) != SPEED_10) 1873 return -EINVAL; 1874 if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL) 1875 return -EINVAL; 1876 if (ecmd->port != PORT_TP && ecmd->port != PORT_AUI) 1877 return -EINVAL; 1878 if (ecmd->transceiver != XCVR_INTERNAL) 1879 return -EINVAL; 1880 1881 if (ecmd->port == PORT_AUI) 1882 smc_set_xcvr(dev, 1); 1883 else 1884 smc_set_xcvr(dev, 0); 1885 1886 SMC_SELECT_BANK(0); 1887 tmp = inw(ioaddr + TCR); 1888 if (ecmd->duplex == DUPLEX_FULL) 1889 tmp |= TCR_FDUPLX; 1890 else 1891 tmp &= ~TCR_FDUPLX; 1892 outw(tmp, ioaddr + TCR); 1893 1894 return 0; 1895 } 1896 1897 static int check_if_running(struct net_device *dev) 1898 { 1899 if (!netif_running(dev)) 1900 return -EINVAL; 1901 return 0; 1902 } 1903 1904 static void smc_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) 1905 { 1906 strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); 1907 strlcpy(info->version, DRV_VERSION, sizeof(info->version)); 1908 } 1909 1910 static int smc_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) 1911 { 1912 struct smc_private *smc = netdev_priv(dev); 1913 unsigned int ioaddr = dev->base_addr; 1914 u16 saved_bank = inw(ioaddr + BANK_SELECT); 1915 int ret; 1916 unsigned long flags; 1917 1918 spin_lock_irqsave(&smc->lock, flags); 1919 SMC_SELECT_BANK(3); 1920 if (smc->cfg & CFG_MII_SELECT) 1921 ret = mii_ethtool_gset(&smc->mii_if, ecmd); 1922 else 1923 ret = smc_netdev_get_ecmd(dev, ecmd); 1924 SMC_SELECT_BANK(saved_bank); 1925 spin_unlock_irqrestore(&smc->lock, flags); 1926 return ret; 1927 } 1928 1929 static int smc_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) 1930 { 1931 struct smc_private *smc = netdev_priv(dev); 1932 unsigned int ioaddr = dev->base_addr; 1933 u16 saved_bank = inw(ioaddr + BANK_SELECT); 1934 int ret; 1935 unsigned long flags; 1936 1937 spin_lock_irqsave(&smc->lock, flags); 1938 SMC_SELECT_BANK(3); 1939 if (smc->cfg & CFG_MII_SELECT) 1940 ret = mii_ethtool_sset(&smc->mii_if, ecmd); 1941 else 1942 ret = smc_netdev_set_ecmd(dev, ecmd); 1943 SMC_SELECT_BANK(saved_bank); 1944 spin_unlock_irqrestore(&smc->lock, flags); 1945 return ret; 1946 } 1947 1948 static u32 smc_get_link(struct net_device *dev) 1949 { 1950 struct smc_private *smc = netdev_priv(dev); 1951 unsigned int ioaddr = dev->base_addr; 1952 u16 saved_bank = inw(ioaddr + BANK_SELECT); 1953 u32 ret; 1954 unsigned long flags; 1955 1956 spin_lock_irqsave(&smc->lock, flags); 1957 SMC_SELECT_BANK(3); 1958 ret = smc_link_ok(dev); 1959 SMC_SELECT_BANK(saved_bank); 1960 spin_unlock_irqrestore(&smc->lock, flags); 1961 return ret; 1962 } 1963 1964 static int smc_nway_reset(struct net_device *dev) 1965 { 1966 struct smc_private *smc = netdev_priv(dev); 1967 if (smc->cfg & CFG_MII_SELECT) { 1968 unsigned int ioaddr = dev->base_addr; 1969 u16 saved_bank = inw(ioaddr + BANK_SELECT); 1970 int res; 1971 1972 SMC_SELECT_BANK(3); 1973 res = mii_nway_restart(&smc->mii_if); 1974 SMC_SELECT_BANK(saved_bank); 1975 1976 return res; 1977 } else 1978 return -EOPNOTSUPP; 1979 } 1980 1981 static const struct ethtool_ops ethtool_ops = { 1982 .begin = check_if_running, 1983 .get_drvinfo = smc_get_drvinfo, 1984 .get_settings = smc_get_settings, 1985 .set_settings = smc_set_settings, 1986 .get_link = smc_get_link, 1987 .nway_reset = smc_nway_reset, 1988 }; 1989 1990 static int smc_ioctl (struct net_device *dev, struct ifreq *rq, int cmd) 1991 { 1992 struct smc_private *smc = netdev_priv(dev); 1993 struct mii_ioctl_data *mii = if_mii(rq); 1994 int rc = 0; 1995 u16 saved_bank; 1996 unsigned int ioaddr = dev->base_addr; 1997 unsigned long flags; 1998 1999 if (!netif_running(dev)) 2000 return -EINVAL; 2001 2002 spin_lock_irqsave(&smc->lock, flags); 2003 saved_bank = inw(ioaddr + BANK_SELECT); 2004 SMC_SELECT_BANK(3); 2005 rc = generic_mii_ioctl(&smc->mii_if, mii, cmd, NULL); 2006 SMC_SELECT_BANK(saved_bank); 2007 spin_unlock_irqrestore(&smc->lock, flags); 2008 return rc; 2009 } 2010 2011 static const struct pcmcia_device_id smc91c92_ids[] = { 2012 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0109, 0x0501), 2013 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0140, 0x000a), 2014 PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63), 2015 PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63), 2016 PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef), 2017 PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef), 2018 PCMCIA_PFC_DEVICE_PROD_ID12(0, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c), 2019 PCMCIA_PFC_DEVICE_PROD_ID12(0, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e), 2020 PCMCIA_PFC_DEVICE_PROD_ID12(0, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9), 2021 PCMCIA_PFC_DEVICE_PROD_ID12(0, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed), 2022 PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x016c, 0x0020), 2023 PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0023), 2024 PCMCIA_DEVICE_PROD_ID123("BASICS by New Media Corporation", "Ethernet", "SMC91C94", 0x23c78a9d, 0x00b2e941, 0xcef397fb), 2025 PCMCIA_DEVICE_PROD_ID12("ARGOSY", "Fast Ethernet PCCard", 0x78f308dc, 0xdcea68bc), 2026 PCMCIA_DEVICE_PROD_ID12("dit Co., Ltd.", "PC Card-10/100BTX", 0xe59365c8, 0x6a2161d1), 2027 PCMCIA_DEVICE_PROD_ID12("DYNALINK", "L100C", 0x6a26d1cf, 0xc16ce9c5), 2028 PCMCIA_DEVICE_PROD_ID12("Farallon", "Farallon Enet", 0x58d93fc4, 0x244734e9), 2029 PCMCIA_DEVICE_PROD_ID12("Megahertz", "CC10BT/2", 0x33234748, 0x3c95b953), 2030 PCMCIA_DEVICE_PROD_ID12("MELCO/SMC", "LPC-TX", 0xa2cd8e6d, 0x42da662a), 2031 PCMCIA_DEVICE_PROD_ID12("Ositech", "Trumpcard:Four of Diamonds Ethernet", 0xc2f80cd, 0xb3466314), 2032 PCMCIA_DEVICE_PROD_ID12("Ositech", "Trumpcard:Seven of Diamonds Ethernet", 0xc2f80cd, 0x194b650a), 2033 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Fast Ethernet PCCard", 0x281f1c5d, 0xdcea68bc), 2034 PCMCIA_DEVICE_PROD_ID12("Psion", "10Mb Ethernet", 0x4ef00b21, 0x844be9e9), 2035 PCMCIA_DEVICE_PROD_ID12("SMC", "EtherEZ Ethernet 8020", 0xc4f8b18b, 0x4a0eeb2d), 2036 /* These conflict with other cards! */ 2037 /* PCMCIA_DEVICE_MANF_CARD(0x0186, 0x0100), */ 2038 /* PCMCIA_DEVICE_MANF_CARD(0x8a01, 0xc1ab), */ 2039 PCMCIA_DEVICE_NULL, 2040 }; 2041 MODULE_DEVICE_TABLE(pcmcia, smc91c92_ids); 2042 2043 static struct pcmcia_driver smc91c92_cs_driver = { 2044 .owner = THIS_MODULE, 2045 .name = "smc91c92_cs", 2046 .probe = smc91c92_probe, 2047 .remove = smc91c92_detach, 2048 .id_table = smc91c92_ids, 2049 .suspend = smc91c92_suspend, 2050 .resume = smc91c92_resume, 2051 }; 2052 module_pcmcia_driver(smc91c92_cs_driver); 2053