1 /*====================================================================== 2 3 A PCMCIA ethernet driver for SMC91c92-based cards. 4 5 This driver supports Megahertz PCMCIA ethernet cards; and 6 Megahertz, Motorola, Ositech, and Psion Dacom ethernet/modem 7 multifunction cards. 8 9 Copyright (C) 1999 David A. Hinds -- dahinds@users.sourceforge.net 10 11 smc91c92_cs.c 1.122 2002/10/25 06:26:39 12 13 This driver contains code written by Donald Becker 14 (becker@scyld.com), Rowan Hughes (x-csrdh@jcu.edu.au), 15 David Hinds (dahinds@users.sourceforge.net), and Erik Stahlman 16 (erik@vt.edu). Donald wrote the SMC 91c92 code using parts of 17 Erik's SMC 91c94 driver. Rowan wrote a similar driver, and I've 18 incorporated some parts of his driver here. I (Dave) wrote most 19 of the PCMCIA glue code, and the Ositech support code. Kelly 20 Stephens (kstephen@holli.com) added support for the Motorola 21 Mariner, with help from Allen Brost. 22 23 This software may be used and distributed according to the terms of 24 the GNU General Public License, incorporated herein by reference. 25 26 ======================================================================*/ 27 28 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 29 30 #include <linux/module.h> 31 #include <linux/kernel.h> 32 #include <linux/slab.h> 33 #include <linux/string.h> 34 #include <linux/timer.h> 35 #include <linux/interrupt.h> 36 #include <linux/delay.h> 37 #include <linux/crc32.h> 38 #include <linux/netdevice.h> 39 #include <linux/etherdevice.h> 40 #include <linux/skbuff.h> 41 #include <linux/if_arp.h> 42 #include <linux/ioport.h> 43 #include <linux/ethtool.h> 44 #include <linux/mii.h> 45 #include <linux/jiffies.h> 46 #include <linux/firmware.h> 47 48 #include <pcmcia/cistpl.h> 49 #include <pcmcia/cisreg.h> 50 #include <pcmcia/ciscode.h> 51 #include <pcmcia/ds.h> 52 #include <pcmcia/ss.h> 53 54 #include <asm/io.h> 55 #include <linux/uaccess.h> 56 57 /*====================================================================*/ 58 59 static const char *if_names[] = { "auto", "10baseT", "10base2"}; 60 61 /* Firmware name */ 62 #define FIRMWARE_NAME "ositech/Xilinx7OD.bin" 63 64 /* Module parameters */ 65 66 MODULE_DESCRIPTION("SMC 91c92 series PCMCIA ethernet driver"); 67 MODULE_LICENSE("GPL"); 68 MODULE_FIRMWARE(FIRMWARE_NAME); 69 70 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0) 71 72 /* 73 Transceiver/media type. 74 0 = auto 75 1 = 10baseT (and autoselect if #define AUTOSELECT), 76 2 = AUI/10base2, 77 */ 78 INT_MODULE_PARM(if_port, 0); 79 80 81 #define DRV_NAME "smc91c92_cs" 82 #define DRV_VERSION "1.123" 83 84 /*====================================================================*/ 85 86 /* Operational parameter that usually are not changed. */ 87 88 /* Time in jiffies before concluding Tx hung */ 89 #define TX_TIMEOUT ((400*HZ)/1000) 90 91 /* Maximum events (Rx packets, etc.) to handle at each interrupt. */ 92 #define INTR_WORK 4 93 94 /* Times to check the check the chip before concluding that it doesn't 95 currently have room for another Tx packet. */ 96 #define MEMORY_WAIT_TIME 8 97 98 struct smc_private { 99 struct pcmcia_device *p_dev; 100 spinlock_t lock; 101 u_short manfid; 102 u_short cardid; 103 104 struct sk_buff *saved_skb; 105 int packets_waiting; 106 void __iomem *base; 107 u_short cfg; 108 struct timer_list media; 109 int watchdog, tx_err; 110 u_short media_status; 111 u_short fast_poll; 112 u_short link_status; 113 struct mii_if_info mii_if; 114 int duplex; 115 int rx_ovrn; 116 }; 117 118 /* Special definitions for Megahertz multifunction cards */ 119 #define MEGAHERTZ_ISR 0x0380 120 121 /* Special function registers for Motorola Mariner */ 122 #define MOT_LAN 0x0000 123 #define MOT_UART 0x0020 124 #define MOT_EEPROM 0x20 125 126 #define MOT_NORMAL \ 127 (COR_LEVEL_REQ | COR_FUNC_ENA | COR_ADDR_DECODE | COR_IREQ_ENA) 128 129 /* Special function registers for Ositech cards */ 130 #define OSITECH_AUI_CTL 0x0c 131 #define OSITECH_PWRDOWN 0x0d 132 #define OSITECH_RESET 0x0e 133 #define OSITECH_ISR 0x0f 134 #define OSITECH_AUI_PWR 0x0c 135 #define OSITECH_RESET_ISR 0x0e 136 137 #define OSI_AUI_PWR 0x40 138 #define OSI_LAN_PWRDOWN 0x02 139 #define OSI_MODEM_PWRDOWN 0x01 140 #define OSI_LAN_RESET 0x02 141 #define OSI_MODEM_RESET 0x01 142 143 /* Symbolic constants for the SMC91c9* series chips, from Erik Stahlman. */ 144 #define BANK_SELECT 14 /* Window select register. */ 145 #define SMC_SELECT_BANK(x) { outw(x, ioaddr + BANK_SELECT); } 146 147 /* Bank 0 registers. */ 148 #define TCR 0 /* transmit control register */ 149 #define TCR_CLEAR 0 /* do NOTHING */ 150 #define TCR_ENABLE 0x0001 /* if this is 1, we can transmit */ 151 #define TCR_PAD_EN 0x0080 /* pads short packets to 64 bytes */ 152 #define TCR_MONCSN 0x0400 /* Monitor Carrier. */ 153 #define TCR_FDUPLX 0x0800 /* Full duplex mode. */ 154 #define TCR_NORMAL TCR_ENABLE | TCR_PAD_EN 155 156 #define EPH 2 /* Ethernet Protocol Handler report. */ 157 #define EPH_TX_SUC 0x0001 158 #define EPH_SNGLCOL 0x0002 159 #define EPH_MULCOL 0x0004 160 #define EPH_LTX_MULT 0x0008 161 #define EPH_16COL 0x0010 162 #define EPH_SQET 0x0020 163 #define EPH_LTX_BRD 0x0040 164 #define EPH_TX_DEFR 0x0080 165 #define EPH_LAT_COL 0x0200 166 #define EPH_LOST_CAR 0x0400 167 #define EPH_EXC_DEF 0x0800 168 #define EPH_CTR_ROL 0x1000 169 #define EPH_RX_OVRN 0x2000 170 #define EPH_LINK_OK 0x4000 171 #define EPH_TX_UNRN 0x8000 172 #define MEMINFO 8 /* Memory Information Register */ 173 #define MEMCFG 10 /* Memory Configuration Register */ 174 175 /* Bank 1 registers. */ 176 #define CONFIG 0 177 #define CFG_MII_SELECT 0x8000 /* 91C100 only */ 178 #define CFG_NO_WAIT 0x1000 179 #define CFG_FULL_STEP 0x0400 180 #define CFG_SET_SQLCH 0x0200 181 #define CFG_AUI_SELECT 0x0100 182 #define CFG_16BIT 0x0080 183 #define CFG_DIS_LINK 0x0040 184 #define CFG_STATIC 0x0030 185 #define CFG_IRQ_SEL_1 0x0004 186 #define CFG_IRQ_SEL_0 0x0002 187 #define BASE_ADDR 2 188 #define ADDR0 4 189 #define GENERAL 10 190 #define CONTROL 12 191 #define CTL_STORE 0x0001 192 #define CTL_RELOAD 0x0002 193 #define CTL_EE_SELECT 0x0004 194 #define CTL_TE_ENABLE 0x0020 195 #define CTL_CR_ENABLE 0x0040 196 #define CTL_LE_ENABLE 0x0080 197 #define CTL_AUTO_RELEASE 0x0800 198 #define CTL_POWERDOWN 0x2000 199 200 /* Bank 2 registers. */ 201 #define MMU_CMD 0 202 #define MC_ALLOC 0x20 /* or with number of 256 byte packets */ 203 #define MC_RESET 0x40 204 #define MC_RELEASE 0x80 /* remove and release the current rx packet */ 205 #define MC_FREEPKT 0xA0 /* Release packet in PNR register */ 206 #define MC_ENQUEUE 0xC0 /* Enqueue the packet for transmit */ 207 #define PNR_ARR 2 208 #define FIFO_PORTS 4 209 #define FP_RXEMPTY 0x8000 210 #define POINTER 6 211 #define PTR_AUTO_INC 0x0040 212 #define PTR_READ 0x2000 213 #define PTR_AUTOINC 0x4000 214 #define PTR_RCV 0x8000 215 #define DATA_1 8 216 #define INTERRUPT 12 217 #define IM_RCV_INT 0x1 218 #define IM_TX_INT 0x2 219 #define IM_TX_EMPTY_INT 0x4 220 #define IM_ALLOC_INT 0x8 221 #define IM_RX_OVRN_INT 0x10 222 #define IM_EPH_INT 0x20 223 224 #define RCR 4 225 enum RxCfg { RxAllMulti = 0x0004, RxPromisc = 0x0002, 226 RxEnable = 0x0100, RxStripCRC = 0x0200}; 227 #define RCR_SOFTRESET 0x8000 /* resets the chip */ 228 #define RCR_STRIP_CRC 0x200 /* strips CRC */ 229 #define RCR_ENABLE 0x100 /* IFF this is set, we can receive packets */ 230 #define RCR_ALMUL 0x4 /* receive all multicast packets */ 231 #define RCR_PROMISC 0x2 /* enable promiscuous mode */ 232 233 /* the normal settings for the RCR register : */ 234 #define RCR_NORMAL (RCR_STRIP_CRC | RCR_ENABLE) 235 #define RCR_CLEAR 0x0 /* set it to a base state */ 236 #define COUNTER 6 237 238 /* BANK 3 -- not the same values as in smc9194! */ 239 #define MULTICAST0 0 240 #define MULTICAST2 2 241 #define MULTICAST4 4 242 #define MULTICAST6 6 243 #define MGMT 8 244 #define REVISION 0x0a 245 246 /* Transmit status bits. */ 247 #define TS_SUCCESS 0x0001 248 #define TS_16COL 0x0010 249 #define TS_LATCOL 0x0200 250 #define TS_LOSTCAR 0x0400 251 252 /* Receive status bits. */ 253 #define RS_ALGNERR 0x8000 254 #define RS_BADCRC 0x2000 255 #define RS_ODDFRAME 0x1000 256 #define RS_TOOLONG 0x0800 257 #define RS_TOOSHORT 0x0400 258 #define RS_MULTICAST 0x0001 259 #define RS_ERRORS (RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT) 260 261 #define set_bits(v, p) outw(inw(p)|(v), (p)) 262 #define mask_bits(v, p) outw(inw(p)&(v), (p)) 263 264 /*====================================================================*/ 265 266 static void smc91c92_detach(struct pcmcia_device *p_dev); 267 static int smc91c92_config(struct pcmcia_device *link); 268 static void smc91c92_release(struct pcmcia_device *link); 269 270 static int smc_open(struct net_device *dev); 271 static int smc_close(struct net_device *dev); 272 static int smc_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); 273 static void smc_tx_timeout(struct net_device *dev); 274 static netdev_tx_t smc_start_xmit(struct sk_buff *skb, 275 struct net_device *dev); 276 static irqreturn_t smc_interrupt(int irq, void *dev_id); 277 static void smc_rx(struct net_device *dev); 278 static void set_rx_mode(struct net_device *dev); 279 static int s9k_config(struct net_device *dev, struct ifmap *map); 280 static void smc_set_xcvr(struct net_device *dev, int if_port); 281 static void smc_reset(struct net_device *dev); 282 static void media_check(u_long arg); 283 static void mdio_sync(unsigned int addr); 284 static int mdio_read(struct net_device *dev, int phy_id, int loc); 285 static void mdio_write(struct net_device *dev, int phy_id, int loc, int value); 286 static int smc_link_ok(struct net_device *dev); 287 static const struct ethtool_ops ethtool_ops; 288 289 static const struct net_device_ops smc_netdev_ops = { 290 .ndo_open = smc_open, 291 .ndo_stop = smc_close, 292 .ndo_start_xmit = smc_start_xmit, 293 .ndo_tx_timeout = smc_tx_timeout, 294 .ndo_set_config = s9k_config, 295 .ndo_set_rx_mode = set_rx_mode, 296 .ndo_do_ioctl = smc_ioctl, 297 .ndo_set_mac_address = eth_mac_addr, 298 .ndo_validate_addr = eth_validate_addr, 299 }; 300 301 static int smc91c92_probe(struct pcmcia_device *link) 302 { 303 struct smc_private *smc; 304 struct net_device *dev; 305 306 dev_dbg(&link->dev, "smc91c92_attach()\n"); 307 308 /* Create new ethernet device */ 309 dev = alloc_etherdev(sizeof(struct smc_private)); 310 if (!dev) 311 return -ENOMEM; 312 smc = netdev_priv(dev); 313 smc->p_dev = link; 314 link->priv = dev; 315 316 spin_lock_init(&smc->lock); 317 318 /* The SMC91c92-specific entries in the device structure. */ 319 dev->netdev_ops = &smc_netdev_ops; 320 dev->ethtool_ops = ðtool_ops; 321 dev->watchdog_timeo = TX_TIMEOUT; 322 323 smc->mii_if.dev = dev; 324 smc->mii_if.mdio_read = mdio_read; 325 smc->mii_if.mdio_write = mdio_write; 326 smc->mii_if.phy_id_mask = 0x1f; 327 smc->mii_if.reg_num_mask = 0x1f; 328 329 return smc91c92_config(link); 330 } /* smc91c92_attach */ 331 332 static void smc91c92_detach(struct pcmcia_device *link) 333 { 334 struct net_device *dev = link->priv; 335 336 dev_dbg(&link->dev, "smc91c92_detach\n"); 337 338 unregister_netdev(dev); 339 340 smc91c92_release(link); 341 342 free_netdev(dev); 343 } /* smc91c92_detach */ 344 345 /*====================================================================*/ 346 347 static int cvt_ascii_address(struct net_device *dev, char *s) 348 { 349 int i, j, da, c; 350 351 if (strlen(s) != 12) 352 return -1; 353 for (i = 0; i < 6; i++) { 354 da = 0; 355 for (j = 0; j < 2; j++) { 356 c = *s++; 357 da <<= 4; 358 da += ((c >= '0') && (c <= '9')) ? 359 (c - '0') : ((c & 0x0f) + 9); 360 } 361 dev->dev_addr[i] = da; 362 } 363 return 0; 364 } 365 366 /*==================================================================== 367 368 Configuration stuff for Megahertz cards 369 370 mhz_3288_power() is used to power up a 3288's ethernet chip. 371 mhz_mfc_config() handles socket setup for multifunction (1144 372 and 3288) cards. mhz_setup() gets a card's hardware ethernet 373 address. 374 375 ======================================================================*/ 376 377 static int mhz_3288_power(struct pcmcia_device *link) 378 { 379 struct net_device *dev = link->priv; 380 struct smc_private *smc = netdev_priv(dev); 381 u_char tmp; 382 383 /* Read the ISR twice... */ 384 readb(smc->base+MEGAHERTZ_ISR); 385 udelay(5); 386 readb(smc->base+MEGAHERTZ_ISR); 387 388 /* Pause 200ms... */ 389 mdelay(200); 390 391 /* Now read and write the COR... */ 392 tmp = readb(smc->base + link->config_base + CISREG_COR); 393 udelay(5); 394 writeb(tmp, smc->base + link->config_base + CISREG_COR); 395 396 return 0; 397 } 398 399 static int mhz_mfc_config_check(struct pcmcia_device *p_dev, void *priv_data) 400 { 401 int k; 402 p_dev->io_lines = 16; 403 p_dev->resource[1]->start = p_dev->resource[0]->start; 404 p_dev->resource[1]->end = 8; 405 p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; 406 p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; 407 p_dev->resource[0]->end = 16; 408 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; 409 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; 410 for (k = 0; k < 0x400; k += 0x10) { 411 if (k & 0x80) 412 continue; 413 p_dev->resource[0]->start = k ^ 0x300; 414 if (!pcmcia_request_io(p_dev)) 415 return 0; 416 } 417 return -ENODEV; 418 } 419 420 static int mhz_mfc_config(struct pcmcia_device *link) 421 { 422 struct net_device *dev = link->priv; 423 struct smc_private *smc = netdev_priv(dev); 424 unsigned int offset; 425 int i; 426 427 link->config_flags |= CONF_ENABLE_SPKR | CONF_ENABLE_IRQ | 428 CONF_AUTO_SET_IO; 429 430 /* The Megahertz combo cards have modem-like CIS entries, so 431 we have to explicitly try a bunch of port combinations. */ 432 if (pcmcia_loop_config(link, mhz_mfc_config_check, NULL)) 433 return -ENODEV; 434 435 dev->base_addr = link->resource[0]->start; 436 437 /* Allocate a memory window, for accessing the ISR */ 438 link->resource[2]->flags = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; 439 link->resource[2]->start = link->resource[2]->end = 0; 440 i = pcmcia_request_window(link, link->resource[2], 0); 441 if (i != 0) 442 return -ENODEV; 443 444 smc->base = ioremap(link->resource[2]->start, 445 resource_size(link->resource[2])); 446 offset = (smc->manfid == MANFID_MOTOROLA) ? link->config_base : 0; 447 i = pcmcia_map_mem_page(link, link->resource[2], offset); 448 if ((i == 0) && 449 (smc->manfid == MANFID_MEGAHERTZ) && 450 (smc->cardid == PRODID_MEGAHERTZ_EM3288)) 451 mhz_3288_power(link); 452 453 return 0; 454 } 455 456 static int pcmcia_get_versmac(struct pcmcia_device *p_dev, 457 tuple_t *tuple, 458 void *priv) 459 { 460 struct net_device *dev = priv; 461 cisparse_t parse; 462 u8 *buf; 463 464 if (pcmcia_parse_tuple(tuple, &parse)) 465 return -EINVAL; 466 467 buf = parse.version_1.str + parse.version_1.ofs[3]; 468 469 if ((parse.version_1.ns > 3) && (cvt_ascii_address(dev, buf) == 0)) 470 return 0; 471 472 return -EINVAL; 473 }; 474 475 static int mhz_setup(struct pcmcia_device *link) 476 { 477 struct net_device *dev = link->priv; 478 size_t len; 479 u8 *buf; 480 int rc; 481 482 /* Read the station address from the CIS. It is stored as the last 483 (fourth) string in the Version 1 Version/ID tuple. */ 484 if ((link->prod_id[3]) && 485 (cvt_ascii_address(dev, link->prod_id[3]) == 0)) 486 return 0; 487 488 /* Workarounds for broken cards start here. */ 489 /* Ugh -- the EM1144 card has two VERS_1 tuples!?! */ 490 if (!pcmcia_loop_tuple(link, CISTPL_VERS_1, pcmcia_get_versmac, dev)) 491 return 0; 492 493 /* Another possibility: for the EM3288, in a special tuple */ 494 rc = -1; 495 len = pcmcia_get_tuple(link, 0x81, &buf); 496 if (buf && len >= 13) { 497 buf[12] = '\0'; 498 if (cvt_ascii_address(dev, buf) == 0) 499 rc = 0; 500 } 501 kfree(buf); 502 503 return rc; 504 }; 505 506 /*====================================================================== 507 508 Configuration stuff for the Motorola Mariner 509 510 mot_config() writes directly to the Mariner configuration 511 registers because the CIS is just bogus. 512 513 ======================================================================*/ 514 515 static void mot_config(struct pcmcia_device *link) 516 { 517 struct net_device *dev = link->priv; 518 struct smc_private *smc = netdev_priv(dev); 519 unsigned int ioaddr = dev->base_addr; 520 unsigned int iouart = link->resource[1]->start; 521 522 /* Set UART base address and force map with COR bit 1 */ 523 writeb(iouart & 0xff, smc->base + MOT_UART + CISREG_IOBASE_0); 524 writeb((iouart >> 8) & 0xff, smc->base + MOT_UART + CISREG_IOBASE_1); 525 writeb(MOT_NORMAL, smc->base + MOT_UART + CISREG_COR); 526 527 /* Set SMC base address and force map with COR bit 1 */ 528 writeb(ioaddr & 0xff, smc->base + MOT_LAN + CISREG_IOBASE_0); 529 writeb((ioaddr >> 8) & 0xff, smc->base + MOT_LAN + CISREG_IOBASE_1); 530 writeb(MOT_NORMAL, smc->base + MOT_LAN + CISREG_COR); 531 532 /* Wait for things to settle down */ 533 mdelay(100); 534 } 535 536 static int mot_setup(struct pcmcia_device *link) 537 { 538 struct net_device *dev = link->priv; 539 unsigned int ioaddr = dev->base_addr; 540 int i, wait, loop; 541 u_int addr; 542 543 /* Read Ethernet address from Serial EEPROM */ 544 545 for (i = 0; i < 3; i++) { 546 SMC_SELECT_BANK(2); 547 outw(MOT_EEPROM + i, ioaddr + POINTER); 548 SMC_SELECT_BANK(1); 549 outw((CTL_RELOAD | CTL_EE_SELECT), ioaddr + CONTROL); 550 551 for (loop = wait = 0; loop < 200; loop++) { 552 udelay(10); 553 wait = ((CTL_RELOAD | CTL_STORE) & inw(ioaddr + CONTROL)); 554 if (wait == 0) break; 555 } 556 557 if (wait) 558 return -1; 559 560 addr = inw(ioaddr + GENERAL); 561 dev->dev_addr[2*i] = addr & 0xff; 562 dev->dev_addr[2*i+1] = (addr >> 8) & 0xff; 563 } 564 565 return 0; 566 } 567 568 /*====================================================================*/ 569 570 static int smc_configcheck(struct pcmcia_device *p_dev, void *priv_data) 571 { 572 p_dev->resource[0]->end = 16; 573 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; 574 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; 575 576 return pcmcia_request_io(p_dev); 577 } 578 579 static int smc_config(struct pcmcia_device *link) 580 { 581 struct net_device *dev = link->priv; 582 int i; 583 584 link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; 585 586 i = pcmcia_loop_config(link, smc_configcheck, NULL); 587 if (!i) 588 dev->base_addr = link->resource[0]->start; 589 590 return i; 591 } 592 593 594 static int smc_setup(struct pcmcia_device *link) 595 { 596 struct net_device *dev = link->priv; 597 598 /* Check for a LAN function extension tuple */ 599 if (!pcmcia_get_mac_from_cis(link, dev)) 600 return 0; 601 602 /* Try the third string in the Version 1 Version/ID tuple. */ 603 if (link->prod_id[2]) { 604 if (cvt_ascii_address(dev, link->prod_id[2]) == 0) 605 return 0; 606 } 607 return -1; 608 } 609 610 /*====================================================================*/ 611 612 static int osi_config(struct pcmcia_device *link) 613 { 614 struct net_device *dev = link->priv; 615 static const unsigned int com[4] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 }; 616 int i, j; 617 618 link->config_flags |= CONF_ENABLE_SPKR | CONF_ENABLE_IRQ; 619 link->resource[0]->end = 64; 620 link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; 621 link->resource[1]->end = 8; 622 623 /* Enable Hard Decode, LAN, Modem */ 624 link->io_lines = 16; 625 link->config_index = 0x23; 626 627 for (i = j = 0; j < 4; j++) { 628 link->resource[1]->start = com[j]; 629 i = pcmcia_request_io(link); 630 if (i == 0) 631 break; 632 } 633 if (i != 0) { 634 /* Fallback: turn off hard decode */ 635 link->config_index = 0x03; 636 link->resource[1]->end = 0; 637 i = pcmcia_request_io(link); 638 } 639 dev->base_addr = link->resource[0]->start + 0x10; 640 return i; 641 } 642 643 static int osi_load_firmware(struct pcmcia_device *link) 644 { 645 const struct firmware *fw; 646 int i, err; 647 648 err = request_firmware(&fw, FIRMWARE_NAME, &link->dev); 649 if (err) { 650 pr_err("Failed to load firmware \"%s\"\n", FIRMWARE_NAME); 651 return err; 652 } 653 654 /* Download the Seven of Diamonds firmware */ 655 for (i = 0; i < fw->size; i++) { 656 outb(fw->data[i], link->resource[0]->start + 2); 657 udelay(50); 658 } 659 release_firmware(fw); 660 return err; 661 } 662 663 static int pcmcia_osi_mac(struct pcmcia_device *p_dev, 664 tuple_t *tuple, 665 void *priv) 666 { 667 struct net_device *dev = priv; 668 int i; 669 670 if (tuple->TupleDataLen < 8) 671 return -EINVAL; 672 if (tuple->TupleData[0] != 0x04) 673 return -EINVAL; 674 for (i = 0; i < 6; i++) 675 dev->dev_addr[i] = tuple->TupleData[i+2]; 676 return 0; 677 }; 678 679 680 static int osi_setup(struct pcmcia_device *link, u_short manfid, u_short cardid) 681 { 682 struct net_device *dev = link->priv; 683 int rc; 684 685 /* Read the station address from tuple 0x90, subtuple 0x04 */ 686 if (pcmcia_loop_tuple(link, 0x90, pcmcia_osi_mac, dev)) 687 return -1; 688 689 if (((manfid == MANFID_OSITECH) && 690 (cardid == PRODID_OSITECH_SEVEN)) || 691 ((manfid == MANFID_PSION) && 692 (cardid == PRODID_PSION_NET100))) { 693 rc = osi_load_firmware(link); 694 if (rc) 695 return rc; 696 } else if (manfid == MANFID_OSITECH) { 697 /* Make sure both functions are powered up */ 698 set_bits(0x300, link->resource[0]->start + OSITECH_AUI_PWR); 699 /* Now, turn on the interrupt for both card functions */ 700 set_bits(0x300, link->resource[0]->start + OSITECH_RESET_ISR); 701 dev_dbg(&link->dev, "AUI/PWR: %4.4x RESET/ISR: %4.4x\n", 702 inw(link->resource[0]->start + OSITECH_AUI_PWR), 703 inw(link->resource[0]->start + OSITECH_RESET_ISR)); 704 } 705 return 0; 706 } 707 708 static int smc91c92_suspend(struct pcmcia_device *link) 709 { 710 struct net_device *dev = link->priv; 711 712 if (link->open) 713 netif_device_detach(dev); 714 715 return 0; 716 } 717 718 static int smc91c92_resume(struct pcmcia_device *link) 719 { 720 struct net_device *dev = link->priv; 721 struct smc_private *smc = netdev_priv(dev); 722 int i; 723 724 if ((smc->manfid == MANFID_MEGAHERTZ) && 725 (smc->cardid == PRODID_MEGAHERTZ_EM3288)) 726 mhz_3288_power(link); 727 if (smc->manfid == MANFID_MOTOROLA) 728 mot_config(link); 729 if ((smc->manfid == MANFID_OSITECH) && 730 (smc->cardid != PRODID_OSITECH_SEVEN)) { 731 /* Power up the card and enable interrupts */ 732 set_bits(0x0300, dev->base_addr-0x10+OSITECH_AUI_PWR); 733 set_bits(0x0300, dev->base_addr-0x10+OSITECH_RESET_ISR); 734 } 735 if (((smc->manfid == MANFID_OSITECH) && 736 (smc->cardid == PRODID_OSITECH_SEVEN)) || 737 ((smc->manfid == MANFID_PSION) && 738 (smc->cardid == PRODID_PSION_NET100))) { 739 i = osi_load_firmware(link); 740 if (i) { 741 netdev_err(dev, "Failed to load firmware\n"); 742 return i; 743 } 744 } 745 if (link->open) { 746 smc_reset(dev); 747 netif_device_attach(dev); 748 } 749 750 return 0; 751 } 752 753 754 /*====================================================================== 755 756 This verifies that the chip is some SMC91cXX variant, and returns 757 the revision code if successful. Otherwise, it returns -ENODEV. 758 759 ======================================================================*/ 760 761 static int check_sig(struct pcmcia_device *link) 762 { 763 struct net_device *dev = link->priv; 764 unsigned int ioaddr = dev->base_addr; 765 int width; 766 u_short s; 767 768 SMC_SELECT_BANK(1); 769 if (inw(ioaddr + BANK_SELECT) >> 8 != 0x33) { 770 /* Try powering up the chip */ 771 outw(0, ioaddr + CONTROL); 772 mdelay(55); 773 } 774 775 /* Try setting bus width */ 776 width = (link->resource[0]->flags == IO_DATA_PATH_WIDTH_AUTO); 777 s = inb(ioaddr + CONFIG); 778 if (width) 779 s |= CFG_16BIT; 780 else 781 s &= ~CFG_16BIT; 782 outb(s, ioaddr + CONFIG); 783 784 /* Check Base Address Register to make sure bus width is OK */ 785 s = inw(ioaddr + BASE_ADDR); 786 if ((inw(ioaddr + BANK_SELECT) >> 8 == 0x33) && 787 ((s >> 8) != (s & 0xff))) { 788 SMC_SELECT_BANK(3); 789 s = inw(ioaddr + REVISION); 790 return s & 0xff; 791 } 792 793 if (width) { 794 netdev_info(dev, "using 8-bit IO window\n"); 795 796 smc91c92_suspend(link); 797 pcmcia_fixup_iowidth(link); 798 smc91c92_resume(link); 799 return check_sig(link); 800 } 801 return -ENODEV; 802 } 803 804 static int smc91c92_config(struct pcmcia_device *link) 805 { 806 struct net_device *dev = link->priv; 807 struct smc_private *smc = netdev_priv(dev); 808 char *name; 809 int i, rev, j = 0; 810 unsigned int ioaddr; 811 u_long mir; 812 813 dev_dbg(&link->dev, "smc91c92_config\n"); 814 815 smc->manfid = link->manf_id; 816 smc->cardid = link->card_id; 817 818 if ((smc->manfid == MANFID_OSITECH) && 819 (smc->cardid != PRODID_OSITECH_SEVEN)) { 820 i = osi_config(link); 821 } else if ((smc->manfid == MANFID_MOTOROLA) || 822 ((smc->manfid == MANFID_MEGAHERTZ) && 823 ((smc->cardid == PRODID_MEGAHERTZ_VARIOUS) || 824 (smc->cardid == PRODID_MEGAHERTZ_EM3288)))) { 825 i = mhz_mfc_config(link); 826 } else { 827 i = smc_config(link); 828 } 829 if (i) 830 goto config_failed; 831 832 i = pcmcia_request_irq(link, smc_interrupt); 833 if (i) 834 goto config_failed; 835 i = pcmcia_enable_device(link); 836 if (i) 837 goto config_failed; 838 839 if (smc->manfid == MANFID_MOTOROLA) 840 mot_config(link); 841 842 dev->irq = link->irq; 843 844 if ((if_port >= 0) && (if_port <= 2)) 845 dev->if_port = if_port; 846 else 847 dev_notice(&link->dev, "invalid if_port requested\n"); 848 849 switch (smc->manfid) { 850 case MANFID_OSITECH: 851 case MANFID_PSION: 852 i = osi_setup(link, smc->manfid, smc->cardid); break; 853 case MANFID_SMC: 854 case MANFID_NEW_MEDIA: 855 i = smc_setup(link); break; 856 case 0x128: /* For broken Megahertz cards */ 857 case MANFID_MEGAHERTZ: 858 i = mhz_setup(link); break; 859 case MANFID_MOTOROLA: 860 default: /* get the hw address from EEPROM */ 861 i = mot_setup(link); break; 862 } 863 864 if (i != 0) { 865 dev_notice(&link->dev, "Unable to find hardware address.\n"); 866 goto config_failed; 867 } 868 869 smc->duplex = 0; 870 smc->rx_ovrn = 0; 871 872 rev = check_sig(link); 873 name = "???"; 874 if (rev > 0) 875 switch (rev >> 4) { 876 case 3: name = "92"; break; 877 case 4: name = ((rev & 15) >= 6) ? "96" : "94"; break; 878 case 5: name = "95"; break; 879 case 7: name = "100"; break; 880 case 8: name = "100-FD"; break; 881 case 9: name = "110"; break; 882 } 883 884 ioaddr = dev->base_addr; 885 if (rev > 0) { 886 u_long mcr; 887 SMC_SELECT_BANK(0); 888 mir = inw(ioaddr + MEMINFO) & 0xff; 889 if (mir == 0xff) mir++; 890 /* Get scale factor for memory size */ 891 mcr = ((rev >> 4) > 3) ? inw(ioaddr + MEMCFG) : 0x0200; 892 mir *= 128 * (1<<((mcr >> 9) & 7)); 893 SMC_SELECT_BANK(1); 894 smc->cfg = inw(ioaddr + CONFIG) & ~CFG_AUI_SELECT; 895 smc->cfg |= CFG_NO_WAIT | CFG_16BIT | CFG_STATIC; 896 if (smc->manfid == MANFID_OSITECH) 897 smc->cfg |= CFG_IRQ_SEL_1 | CFG_IRQ_SEL_0; 898 if ((rev >> 4) >= 7) 899 smc->cfg |= CFG_MII_SELECT; 900 } else 901 mir = 0; 902 903 if (smc->cfg & CFG_MII_SELECT) { 904 SMC_SELECT_BANK(3); 905 906 for (i = 0; i < 32; i++) { 907 j = mdio_read(dev, i, 1); 908 if ((j != 0) && (j != 0xffff)) break; 909 } 910 smc->mii_if.phy_id = (i < 32) ? i : -1; 911 912 SMC_SELECT_BANK(0); 913 } 914 915 SET_NETDEV_DEV(dev, &link->dev); 916 917 if (register_netdev(dev) != 0) { 918 dev_err(&link->dev, "register_netdev() failed\n"); 919 goto config_undo; 920 } 921 922 netdev_info(dev, "smc91c%s rev %d: io %#3lx, irq %d, hw_addr %pM\n", 923 name, (rev & 0x0f), dev->base_addr, dev->irq, dev->dev_addr); 924 925 if (rev > 0) { 926 if (mir & 0x3ff) 927 netdev_info(dev, " %lu byte", mir); 928 else 929 netdev_info(dev, " %lu kb", mir>>10); 930 pr_cont(" buffer, %s xcvr\n", 931 (smc->cfg & CFG_MII_SELECT) ? "MII" : if_names[dev->if_port]); 932 } 933 934 if (smc->cfg & CFG_MII_SELECT) { 935 if (smc->mii_if.phy_id != -1) { 936 netdev_dbg(dev, " MII transceiver at index %d, status %x\n", 937 smc->mii_if.phy_id, j); 938 } else { 939 netdev_notice(dev, " No MII transceivers found!\n"); 940 } 941 } 942 return 0; 943 944 config_undo: 945 unregister_netdev(dev); 946 config_failed: 947 smc91c92_release(link); 948 free_netdev(dev); 949 return -ENODEV; 950 } /* smc91c92_config */ 951 952 static void smc91c92_release(struct pcmcia_device *link) 953 { 954 dev_dbg(&link->dev, "smc91c92_release\n"); 955 if (link->resource[2]->end) { 956 struct net_device *dev = link->priv; 957 struct smc_private *smc = netdev_priv(dev); 958 iounmap(smc->base); 959 } 960 pcmcia_disable_device(link); 961 } 962 963 /*====================================================================== 964 965 MII interface support for SMC91cXX based cards 966 ======================================================================*/ 967 968 #define MDIO_SHIFT_CLK 0x04 969 #define MDIO_DATA_OUT 0x01 970 #define MDIO_DIR_WRITE 0x08 971 #define MDIO_DATA_WRITE0 (MDIO_DIR_WRITE) 972 #define MDIO_DATA_WRITE1 (MDIO_DIR_WRITE | MDIO_DATA_OUT) 973 #define MDIO_DATA_READ 0x02 974 975 static void mdio_sync(unsigned int addr) 976 { 977 int bits; 978 for (bits = 0; bits < 32; bits++) { 979 outb(MDIO_DATA_WRITE1, addr); 980 outb(MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, addr); 981 } 982 } 983 984 static int mdio_read(struct net_device *dev, int phy_id, int loc) 985 { 986 unsigned int addr = dev->base_addr + MGMT; 987 u_int cmd = (0x06<<10)|(phy_id<<5)|loc; 988 int i, retval = 0; 989 990 mdio_sync(addr); 991 for (i = 13; i >= 0; i--) { 992 int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0; 993 outb(dat, addr); 994 outb(dat | MDIO_SHIFT_CLK, addr); 995 } 996 for (i = 19; i > 0; i--) { 997 outb(0, addr); 998 retval = (retval << 1) | ((inb(addr) & MDIO_DATA_READ) != 0); 999 outb(MDIO_SHIFT_CLK, addr); 1000 } 1001 return (retval>>1) & 0xffff; 1002 } 1003 1004 static void mdio_write(struct net_device *dev, int phy_id, int loc, int value) 1005 { 1006 unsigned int addr = dev->base_addr + MGMT; 1007 u_int cmd = (0x05<<28)|(phy_id<<23)|(loc<<18)|(1<<17)|value; 1008 int i; 1009 1010 mdio_sync(addr); 1011 for (i = 31; i >= 0; i--) { 1012 int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0; 1013 outb(dat, addr); 1014 outb(dat | MDIO_SHIFT_CLK, addr); 1015 } 1016 for (i = 1; i >= 0; i--) { 1017 outb(0, addr); 1018 outb(MDIO_SHIFT_CLK, addr); 1019 } 1020 } 1021 1022 /*====================================================================== 1023 1024 The driver core code, most of which should be common with a 1025 non-PCMCIA implementation. 1026 1027 ======================================================================*/ 1028 1029 #ifdef PCMCIA_DEBUG 1030 static void smc_dump(struct net_device *dev) 1031 { 1032 unsigned int ioaddr = dev->base_addr; 1033 u_short i, w, save; 1034 save = inw(ioaddr + BANK_SELECT); 1035 for (w = 0; w < 4; w++) { 1036 SMC_SELECT_BANK(w); 1037 netdev_dbg(dev, "bank %d: ", w); 1038 for (i = 0; i < 14; i += 2) 1039 pr_cont(" %04x", inw(ioaddr + i)); 1040 pr_cont("\n"); 1041 } 1042 outw(save, ioaddr + BANK_SELECT); 1043 } 1044 #endif 1045 1046 static int smc_open(struct net_device *dev) 1047 { 1048 struct smc_private *smc = netdev_priv(dev); 1049 struct pcmcia_device *link = smc->p_dev; 1050 1051 dev_dbg(&link->dev, "%s: smc_open(%p), ID/Window %4.4x.\n", 1052 dev->name, dev, inw(dev->base_addr + BANK_SELECT)); 1053 #ifdef PCMCIA_DEBUG 1054 smc_dump(dev); 1055 #endif 1056 1057 /* Check that the PCMCIA card is still here. */ 1058 if (!pcmcia_dev_present(link)) 1059 return -ENODEV; 1060 /* Physical device present signature. */ 1061 if (check_sig(link) < 0) { 1062 netdev_info(dev, "Yikes! Bad chip signature!\n"); 1063 return -ENODEV; 1064 } 1065 link->open++; 1066 1067 netif_start_queue(dev); 1068 smc->saved_skb = NULL; 1069 smc->packets_waiting = 0; 1070 1071 smc_reset(dev); 1072 setup_timer(&smc->media, media_check, (u_long)dev); 1073 mod_timer(&smc->media, jiffies + HZ); 1074 1075 return 0; 1076 } /* smc_open */ 1077 1078 /*====================================================================*/ 1079 1080 static int smc_close(struct net_device *dev) 1081 { 1082 struct smc_private *smc = netdev_priv(dev); 1083 struct pcmcia_device *link = smc->p_dev; 1084 unsigned int ioaddr = dev->base_addr; 1085 1086 dev_dbg(&link->dev, "%s: smc_close(), status %4.4x.\n", 1087 dev->name, inw(ioaddr + BANK_SELECT)); 1088 1089 netif_stop_queue(dev); 1090 1091 /* Shut off all interrupts, and turn off the Tx and Rx sections. 1092 Don't bother to check for chip present. */ 1093 SMC_SELECT_BANK(2); /* Nominally paranoia, but do no assume... */ 1094 outw(0, ioaddr + INTERRUPT); 1095 SMC_SELECT_BANK(0); 1096 mask_bits(0xff00, ioaddr + RCR); 1097 mask_bits(0xff00, ioaddr + TCR); 1098 1099 /* Put the chip into power-down mode. */ 1100 SMC_SELECT_BANK(1); 1101 outw(CTL_POWERDOWN, ioaddr + CONTROL ); 1102 1103 link->open--; 1104 del_timer_sync(&smc->media); 1105 1106 return 0; 1107 } /* smc_close */ 1108 1109 /*====================================================================== 1110 1111 Transfer a packet to the hardware and trigger the packet send. 1112 This may be called at either from either the Tx queue code 1113 or the interrupt handler. 1114 1115 ======================================================================*/ 1116 1117 static void smc_hardware_send_packet(struct net_device * dev) 1118 { 1119 struct smc_private *smc = netdev_priv(dev); 1120 struct sk_buff *skb = smc->saved_skb; 1121 unsigned int ioaddr = dev->base_addr; 1122 u_char packet_no; 1123 1124 if (!skb) { 1125 netdev_err(dev, "In XMIT with no packet to send\n"); 1126 return; 1127 } 1128 1129 /* There should be a packet slot waiting. */ 1130 packet_no = inw(ioaddr + PNR_ARR) >> 8; 1131 if (packet_no & 0x80) { 1132 /* If not, there is a hardware problem! Likely an ejected card. */ 1133 netdev_warn(dev, "hardware Tx buffer allocation failed, status %#2.2x\n", 1134 packet_no); 1135 dev_kfree_skb_irq(skb); 1136 smc->saved_skb = NULL; 1137 netif_start_queue(dev); 1138 return; 1139 } 1140 1141 dev->stats.tx_bytes += skb->len; 1142 /* The card should use the just-allocated buffer. */ 1143 outw(packet_no, ioaddr + PNR_ARR); 1144 /* point to the beginning of the packet */ 1145 outw(PTR_AUTOINC , ioaddr + POINTER); 1146 1147 /* Send the packet length (+6 for status, length and ctl byte) 1148 and the status word (set to zeros). */ 1149 { 1150 u_char *buf = skb->data; 1151 u_int length = skb->len; /* The chip will pad to ethernet min. */ 1152 1153 netdev_dbg(dev, "Trying to xmit packet of length %d\n", length); 1154 1155 /* send the packet length: +6 for status word, length, and ctl */ 1156 outw(0, ioaddr + DATA_1); 1157 outw(length + 6, ioaddr + DATA_1); 1158 outsw(ioaddr + DATA_1, buf, length >> 1); 1159 1160 /* The odd last byte, if there is one, goes in the control word. */ 1161 outw((length & 1) ? 0x2000 | buf[length-1] : 0, ioaddr + DATA_1); 1162 } 1163 1164 /* Enable the Tx interrupts, both Tx (TxErr) and TxEmpty. */ 1165 outw(((IM_TX_INT|IM_TX_EMPTY_INT)<<8) | 1166 (inw(ioaddr + INTERRUPT) & 0xff00), 1167 ioaddr + INTERRUPT); 1168 1169 /* The chip does the rest of the work. */ 1170 outw(MC_ENQUEUE , ioaddr + MMU_CMD); 1171 1172 smc->saved_skb = NULL; 1173 dev_kfree_skb_irq(skb); 1174 netif_trans_update(dev); 1175 netif_start_queue(dev); 1176 } 1177 1178 /*====================================================================*/ 1179 1180 static void smc_tx_timeout(struct net_device *dev) 1181 { 1182 struct smc_private *smc = netdev_priv(dev); 1183 unsigned int ioaddr = dev->base_addr; 1184 1185 netdev_notice(dev, "transmit timed out, Tx_status %2.2x status %4.4x.\n", 1186 inw(ioaddr)&0xff, inw(ioaddr + 2)); 1187 dev->stats.tx_errors++; 1188 smc_reset(dev); 1189 netif_trans_update(dev); /* prevent tx timeout */ 1190 smc->saved_skb = NULL; 1191 netif_wake_queue(dev); 1192 } 1193 1194 static netdev_tx_t smc_start_xmit(struct sk_buff *skb, 1195 struct net_device *dev) 1196 { 1197 struct smc_private *smc = netdev_priv(dev); 1198 unsigned int ioaddr = dev->base_addr; 1199 u_short num_pages; 1200 short time_out, ir; 1201 unsigned long flags; 1202 1203 netif_stop_queue(dev); 1204 1205 netdev_dbg(dev, "smc_start_xmit(length = %d) called, status %04x\n", 1206 skb->len, inw(ioaddr + 2)); 1207 1208 if (smc->saved_skb) { 1209 /* THIS SHOULD NEVER HAPPEN. */ 1210 dev->stats.tx_aborted_errors++; 1211 netdev_dbg(dev, "Internal error -- sent packet while busy\n"); 1212 return NETDEV_TX_BUSY; 1213 } 1214 smc->saved_skb = skb; 1215 1216 num_pages = skb->len >> 8; 1217 1218 if (num_pages > 7) { 1219 netdev_err(dev, "Far too big packet error: %d pages\n", num_pages); 1220 dev_kfree_skb (skb); 1221 smc->saved_skb = NULL; 1222 dev->stats.tx_dropped++; 1223 return NETDEV_TX_OK; /* Do not re-queue this packet. */ 1224 } 1225 /* A packet is now waiting. */ 1226 smc->packets_waiting++; 1227 1228 spin_lock_irqsave(&smc->lock, flags); 1229 SMC_SELECT_BANK(2); /* Paranoia, we should always be in window 2 */ 1230 1231 /* need MC_RESET to keep the memory consistent. errata? */ 1232 if (smc->rx_ovrn) { 1233 outw(MC_RESET, ioaddr + MMU_CMD); 1234 smc->rx_ovrn = 0; 1235 } 1236 1237 /* Allocate the memory; send the packet now if we win. */ 1238 outw(MC_ALLOC | num_pages, ioaddr + MMU_CMD); 1239 for (time_out = MEMORY_WAIT_TIME; time_out >= 0; time_out--) { 1240 ir = inw(ioaddr+INTERRUPT); 1241 if (ir & IM_ALLOC_INT) { 1242 /* Acknowledge the interrupt, send the packet. */ 1243 outw((ir&0xff00) | IM_ALLOC_INT, ioaddr + INTERRUPT); 1244 smc_hardware_send_packet(dev); /* Send the packet now.. */ 1245 spin_unlock_irqrestore(&smc->lock, flags); 1246 return NETDEV_TX_OK; 1247 } 1248 } 1249 1250 /* Otherwise defer until the Tx-space-allocated interrupt. */ 1251 netdev_dbg(dev, "memory allocation deferred.\n"); 1252 outw((IM_ALLOC_INT << 8) | (ir & 0xff00), ioaddr + INTERRUPT); 1253 spin_unlock_irqrestore(&smc->lock, flags); 1254 1255 return NETDEV_TX_OK; 1256 } 1257 1258 /*====================================================================== 1259 1260 Handle a Tx anomalous event. Entered while in Window 2. 1261 1262 ======================================================================*/ 1263 1264 static void smc_tx_err(struct net_device * dev) 1265 { 1266 struct smc_private *smc = netdev_priv(dev); 1267 unsigned int ioaddr = dev->base_addr; 1268 int saved_packet = inw(ioaddr + PNR_ARR) & 0xff; 1269 int packet_no = inw(ioaddr + FIFO_PORTS) & 0x7f; 1270 int tx_status; 1271 1272 /* select this as the packet to read from */ 1273 outw(packet_no, ioaddr + PNR_ARR); 1274 1275 /* read the first word from this packet */ 1276 outw(PTR_AUTOINC | PTR_READ | 0, ioaddr + POINTER); 1277 1278 tx_status = inw(ioaddr + DATA_1); 1279 1280 dev->stats.tx_errors++; 1281 if (tx_status & TS_LOSTCAR) dev->stats.tx_carrier_errors++; 1282 if (tx_status & TS_LATCOL) dev->stats.tx_window_errors++; 1283 if (tx_status & TS_16COL) { 1284 dev->stats.tx_aborted_errors++; 1285 smc->tx_err++; 1286 } 1287 1288 if (tx_status & TS_SUCCESS) { 1289 netdev_notice(dev, "Successful packet caused error interrupt?\n"); 1290 } 1291 /* re-enable transmit */ 1292 SMC_SELECT_BANK(0); 1293 outw(inw(ioaddr + TCR) | TCR_ENABLE | smc->duplex, ioaddr + TCR); 1294 SMC_SELECT_BANK(2); 1295 1296 outw(MC_FREEPKT, ioaddr + MMU_CMD); /* Free the packet memory. */ 1297 1298 /* one less packet waiting for me */ 1299 smc->packets_waiting--; 1300 1301 outw(saved_packet, ioaddr + PNR_ARR); 1302 } 1303 1304 /*====================================================================*/ 1305 1306 static void smc_eph_irq(struct net_device *dev) 1307 { 1308 struct smc_private *smc = netdev_priv(dev); 1309 unsigned int ioaddr = dev->base_addr; 1310 u_short card_stats, ephs; 1311 1312 SMC_SELECT_BANK(0); 1313 ephs = inw(ioaddr + EPH); 1314 netdev_dbg(dev, "Ethernet protocol handler interrupt, status %4.4x.\n", 1315 ephs); 1316 /* Could be a counter roll-over warning: update stats. */ 1317 card_stats = inw(ioaddr + COUNTER); 1318 /* single collisions */ 1319 dev->stats.collisions += card_stats & 0xF; 1320 card_stats >>= 4; 1321 /* multiple collisions */ 1322 dev->stats.collisions += card_stats & 0xF; 1323 #if 0 /* These are for when linux supports these statistics */ 1324 card_stats >>= 4; /* deferred */ 1325 card_stats >>= 4; /* excess deferred */ 1326 #endif 1327 /* If we had a transmit error we must re-enable the transmitter. */ 1328 outw(inw(ioaddr + TCR) | TCR_ENABLE | smc->duplex, ioaddr + TCR); 1329 1330 /* Clear a link error interrupt. */ 1331 SMC_SELECT_BANK(1); 1332 outw(CTL_AUTO_RELEASE | 0x0000, ioaddr + CONTROL); 1333 outw(CTL_AUTO_RELEASE | CTL_TE_ENABLE | CTL_CR_ENABLE, 1334 ioaddr + CONTROL); 1335 SMC_SELECT_BANK(2); 1336 } 1337 1338 /*====================================================================*/ 1339 1340 static irqreturn_t smc_interrupt(int irq, void *dev_id) 1341 { 1342 struct net_device *dev = dev_id; 1343 struct smc_private *smc = netdev_priv(dev); 1344 unsigned int ioaddr; 1345 u_short saved_bank, saved_pointer, mask, status; 1346 unsigned int handled = 1; 1347 char bogus_cnt = INTR_WORK; /* Work we are willing to do. */ 1348 1349 if (!netif_device_present(dev)) 1350 return IRQ_NONE; 1351 1352 ioaddr = dev->base_addr; 1353 1354 netdev_dbg(dev, "SMC91c92 interrupt %d at %#x.\n", 1355 irq, ioaddr); 1356 1357 spin_lock(&smc->lock); 1358 smc->watchdog = 0; 1359 saved_bank = inw(ioaddr + BANK_SELECT); 1360 if ((saved_bank & 0xff00) != 0x3300) { 1361 /* The device does not exist -- the card could be off-line, or 1362 maybe it has been ejected. */ 1363 netdev_dbg(dev, "SMC91c92 interrupt %d for non-existent/ejected device.\n", 1364 irq); 1365 handled = 0; 1366 goto irq_done; 1367 } 1368 1369 SMC_SELECT_BANK(2); 1370 saved_pointer = inw(ioaddr + POINTER); 1371 mask = inw(ioaddr + INTERRUPT) >> 8; 1372 /* clear all interrupts */ 1373 outw(0, ioaddr + INTERRUPT); 1374 1375 do { /* read the status flag, and mask it */ 1376 status = inw(ioaddr + INTERRUPT) & 0xff; 1377 netdev_dbg(dev, "Status is %#2.2x (mask %#2.2x).\n", 1378 status, mask); 1379 if ((status & mask) == 0) { 1380 if (bogus_cnt == INTR_WORK) 1381 handled = 0; 1382 break; 1383 } 1384 if (status & IM_RCV_INT) { 1385 /* Got a packet(s). */ 1386 smc_rx(dev); 1387 } 1388 if (status & IM_TX_INT) { 1389 smc_tx_err(dev); 1390 outw(IM_TX_INT, ioaddr + INTERRUPT); 1391 } 1392 status &= mask; 1393 if (status & IM_TX_EMPTY_INT) { 1394 outw(IM_TX_EMPTY_INT, ioaddr + INTERRUPT); 1395 mask &= ~IM_TX_EMPTY_INT; 1396 dev->stats.tx_packets += smc->packets_waiting; 1397 smc->packets_waiting = 0; 1398 } 1399 if (status & IM_ALLOC_INT) { 1400 /* Clear this interrupt so it doesn't happen again */ 1401 mask &= ~IM_ALLOC_INT; 1402 1403 smc_hardware_send_packet(dev); 1404 1405 /* enable xmit interrupts based on this */ 1406 mask |= (IM_TX_EMPTY_INT | IM_TX_INT); 1407 1408 /* and let the card send more packets to me */ 1409 netif_wake_queue(dev); 1410 } 1411 if (status & IM_RX_OVRN_INT) { 1412 dev->stats.rx_errors++; 1413 dev->stats.rx_fifo_errors++; 1414 if (smc->duplex) 1415 smc->rx_ovrn = 1; /* need MC_RESET outside smc_interrupt */ 1416 outw(IM_RX_OVRN_INT, ioaddr + INTERRUPT); 1417 } 1418 if (status & IM_EPH_INT) 1419 smc_eph_irq(dev); 1420 } while (--bogus_cnt); 1421 1422 netdev_dbg(dev, " Restoring saved registers mask %2.2x bank %4.4x pointer %4.4x.\n", 1423 mask, saved_bank, saved_pointer); 1424 1425 /* restore state register */ 1426 outw((mask<<8), ioaddr + INTERRUPT); 1427 outw(saved_pointer, ioaddr + POINTER); 1428 SMC_SELECT_BANK(saved_bank); 1429 1430 netdev_dbg(dev, "Exiting interrupt IRQ%d.\n", irq); 1431 1432 irq_done: 1433 1434 if ((smc->manfid == MANFID_OSITECH) && 1435 (smc->cardid != PRODID_OSITECH_SEVEN)) { 1436 /* Retrigger interrupt if needed */ 1437 mask_bits(0x00ff, ioaddr-0x10+OSITECH_RESET_ISR); 1438 set_bits(0x0300, ioaddr-0x10+OSITECH_RESET_ISR); 1439 } 1440 if (smc->manfid == MANFID_MOTOROLA) { 1441 u_char cor; 1442 cor = readb(smc->base + MOT_UART + CISREG_COR); 1443 writeb(cor & ~COR_IREQ_ENA, smc->base + MOT_UART + CISREG_COR); 1444 writeb(cor, smc->base + MOT_UART + CISREG_COR); 1445 cor = readb(smc->base + MOT_LAN + CISREG_COR); 1446 writeb(cor & ~COR_IREQ_ENA, smc->base + MOT_LAN + CISREG_COR); 1447 writeb(cor, smc->base + MOT_LAN + CISREG_COR); 1448 } 1449 1450 if ((smc->base != NULL) && /* Megahertz MFC's */ 1451 (smc->manfid == MANFID_MEGAHERTZ) && 1452 (smc->cardid == PRODID_MEGAHERTZ_EM3288)) { 1453 1454 u_char tmp; 1455 tmp = readb(smc->base+MEGAHERTZ_ISR); 1456 tmp = readb(smc->base+MEGAHERTZ_ISR); 1457 1458 /* Retrigger interrupt if needed */ 1459 writeb(tmp, smc->base + MEGAHERTZ_ISR); 1460 writeb(tmp, smc->base + MEGAHERTZ_ISR); 1461 } 1462 1463 spin_unlock(&smc->lock); 1464 return IRQ_RETVAL(handled); 1465 } 1466 1467 /*====================================================================*/ 1468 1469 static void smc_rx(struct net_device *dev) 1470 { 1471 unsigned int ioaddr = dev->base_addr; 1472 int rx_status; 1473 int packet_length; /* Caution: not frame length, rather words 1474 to transfer from the chip. */ 1475 1476 /* Assertion: we are in Window 2. */ 1477 1478 if (inw(ioaddr + FIFO_PORTS) & FP_RXEMPTY) { 1479 netdev_err(dev, "smc_rx() with nothing on Rx FIFO\n"); 1480 return; 1481 } 1482 1483 /* Reset the read pointer, and read the status and packet length. */ 1484 outw(PTR_READ | PTR_RCV | PTR_AUTOINC, ioaddr + POINTER); 1485 rx_status = inw(ioaddr + DATA_1); 1486 packet_length = inw(ioaddr + DATA_1) & 0x07ff; 1487 1488 netdev_dbg(dev, "Receive status %4.4x length %d.\n", 1489 rx_status, packet_length); 1490 1491 if (!(rx_status & RS_ERRORS)) { 1492 /* do stuff to make a new packet */ 1493 struct sk_buff *skb; 1494 1495 /* Note: packet_length adds 5 or 6 extra bytes here! */ 1496 skb = netdev_alloc_skb(dev, packet_length+2); 1497 1498 if (skb == NULL) { 1499 netdev_dbg(dev, "Low memory, packet dropped.\n"); 1500 dev->stats.rx_dropped++; 1501 outw(MC_RELEASE, ioaddr + MMU_CMD); 1502 return; 1503 } 1504 1505 packet_length -= (rx_status & RS_ODDFRAME ? 5 : 6); 1506 skb_reserve(skb, 2); 1507 insw(ioaddr+DATA_1, skb_put(skb, packet_length), 1508 (packet_length+1)>>1); 1509 skb->protocol = eth_type_trans(skb, dev); 1510 1511 netif_rx(skb); 1512 dev->last_rx = jiffies; 1513 dev->stats.rx_packets++; 1514 dev->stats.rx_bytes += packet_length; 1515 if (rx_status & RS_MULTICAST) 1516 dev->stats.multicast++; 1517 } else { 1518 /* error ... */ 1519 dev->stats.rx_errors++; 1520 1521 if (rx_status & RS_ALGNERR) dev->stats.rx_frame_errors++; 1522 if (rx_status & (RS_TOOSHORT | RS_TOOLONG)) 1523 dev->stats.rx_length_errors++; 1524 if (rx_status & RS_BADCRC) dev->stats.rx_crc_errors++; 1525 } 1526 /* Let the MMU free the memory of this packet. */ 1527 outw(MC_RELEASE, ioaddr + MMU_CMD); 1528 } 1529 1530 /*====================================================================== 1531 1532 Set the receive mode. 1533 1534 This routine is used by both the protocol level to notify us of 1535 promiscuous/multicast mode changes, and by the open/reset code to 1536 initialize the Rx registers. We always set the multicast list and 1537 leave the receiver running. 1538 1539 ======================================================================*/ 1540 1541 static void set_rx_mode(struct net_device *dev) 1542 { 1543 unsigned int ioaddr = dev->base_addr; 1544 struct smc_private *smc = netdev_priv(dev); 1545 unsigned char multicast_table[8]; 1546 unsigned long flags; 1547 u_short rx_cfg_setting; 1548 int i; 1549 1550 memset(multicast_table, 0, sizeof(multicast_table)); 1551 1552 if (dev->flags & IFF_PROMISC) { 1553 rx_cfg_setting = RxStripCRC | RxEnable | RxPromisc | RxAllMulti; 1554 } else if (dev->flags & IFF_ALLMULTI) 1555 rx_cfg_setting = RxStripCRC | RxEnable | RxAllMulti; 1556 else { 1557 if (!netdev_mc_empty(dev)) { 1558 struct netdev_hw_addr *ha; 1559 1560 netdev_for_each_mc_addr(ha, dev) { 1561 u_int position = ether_crc(6, ha->addr); 1562 multicast_table[position >> 29] |= 1 << ((position >> 26) & 7); 1563 } 1564 } 1565 rx_cfg_setting = RxStripCRC | RxEnable; 1566 } 1567 1568 /* Load MC table and Rx setting into the chip without interrupts. */ 1569 spin_lock_irqsave(&smc->lock, flags); 1570 SMC_SELECT_BANK(3); 1571 for (i = 0; i < 8; i++) 1572 outb(multicast_table[i], ioaddr + MULTICAST0 + i); 1573 SMC_SELECT_BANK(0); 1574 outw(rx_cfg_setting, ioaddr + RCR); 1575 SMC_SELECT_BANK(2); 1576 spin_unlock_irqrestore(&smc->lock, flags); 1577 } 1578 1579 /*====================================================================== 1580 1581 Senses when a card's config changes. Here, it's coax or TP. 1582 1583 ======================================================================*/ 1584 1585 static int s9k_config(struct net_device *dev, struct ifmap *map) 1586 { 1587 struct smc_private *smc = netdev_priv(dev); 1588 if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) { 1589 if (smc->cfg & CFG_MII_SELECT) 1590 return -EOPNOTSUPP; 1591 else if (map->port > 2) 1592 return -EINVAL; 1593 dev->if_port = map->port; 1594 netdev_info(dev, "switched to %s port\n", if_names[dev->if_port]); 1595 smc_reset(dev); 1596 } 1597 return 0; 1598 } 1599 1600 /*====================================================================== 1601 1602 Reset the chip, reloading every register that might be corrupted. 1603 1604 ======================================================================*/ 1605 1606 /* 1607 Set transceiver type, perhaps to something other than what the user 1608 specified in dev->if_port. 1609 */ 1610 static void smc_set_xcvr(struct net_device *dev, int if_port) 1611 { 1612 struct smc_private *smc = netdev_priv(dev); 1613 unsigned int ioaddr = dev->base_addr; 1614 u_short saved_bank; 1615 1616 saved_bank = inw(ioaddr + BANK_SELECT); 1617 SMC_SELECT_BANK(1); 1618 if (if_port == 2) { 1619 outw(smc->cfg | CFG_AUI_SELECT, ioaddr + CONFIG); 1620 if ((smc->manfid == MANFID_OSITECH) && 1621 (smc->cardid != PRODID_OSITECH_SEVEN)) 1622 set_bits(OSI_AUI_PWR, ioaddr - 0x10 + OSITECH_AUI_PWR); 1623 smc->media_status = ((dev->if_port == 0) ? 0x0001 : 0x0002); 1624 } else { 1625 outw(smc->cfg, ioaddr + CONFIG); 1626 if ((smc->manfid == MANFID_OSITECH) && 1627 (smc->cardid != PRODID_OSITECH_SEVEN)) 1628 mask_bits(~OSI_AUI_PWR, ioaddr - 0x10 + OSITECH_AUI_PWR); 1629 smc->media_status = ((dev->if_port == 0) ? 0x0012 : 0x4001); 1630 } 1631 SMC_SELECT_BANK(saved_bank); 1632 } 1633 1634 static void smc_reset(struct net_device *dev) 1635 { 1636 unsigned int ioaddr = dev->base_addr; 1637 struct smc_private *smc = netdev_priv(dev); 1638 int i; 1639 1640 netdev_dbg(dev, "smc91c92 reset called.\n"); 1641 1642 /* The first interaction must be a write to bring the chip out 1643 of sleep mode. */ 1644 SMC_SELECT_BANK(0); 1645 /* Reset the chip. */ 1646 outw(RCR_SOFTRESET, ioaddr + RCR); 1647 udelay(10); 1648 1649 /* Clear the transmit and receive configuration registers. */ 1650 outw(RCR_CLEAR, ioaddr + RCR); 1651 outw(TCR_CLEAR, ioaddr + TCR); 1652 1653 /* Set the Window 1 control, configuration and station addr registers. 1654 No point in writing the I/O base register ;-> */ 1655 SMC_SELECT_BANK(1); 1656 /* Automatically release successfully transmitted packets, 1657 Accept link errors, counter and Tx error interrupts. */ 1658 outw(CTL_AUTO_RELEASE | CTL_TE_ENABLE | CTL_CR_ENABLE, 1659 ioaddr + CONTROL); 1660 smc_set_xcvr(dev, dev->if_port); 1661 if ((smc->manfid == MANFID_OSITECH) && 1662 (smc->cardid != PRODID_OSITECH_SEVEN)) 1663 outw((dev->if_port == 2 ? OSI_AUI_PWR : 0) | 1664 (inw(ioaddr-0x10+OSITECH_AUI_PWR) & 0xff00), 1665 ioaddr - 0x10 + OSITECH_AUI_PWR); 1666 1667 /* Fill in the physical address. The databook is wrong about the order! */ 1668 for (i = 0; i < 6; i += 2) 1669 outw((dev->dev_addr[i+1]<<8)+dev->dev_addr[i], 1670 ioaddr + ADDR0 + i); 1671 1672 /* Reset the MMU */ 1673 SMC_SELECT_BANK(2); 1674 outw(MC_RESET, ioaddr + MMU_CMD); 1675 outw(0, ioaddr + INTERRUPT); 1676 1677 /* Re-enable the chip. */ 1678 SMC_SELECT_BANK(0); 1679 outw(((smc->cfg & CFG_MII_SELECT) ? 0 : TCR_MONCSN) | 1680 TCR_ENABLE | TCR_PAD_EN | smc->duplex, ioaddr + TCR); 1681 set_rx_mode(dev); 1682 1683 if (smc->cfg & CFG_MII_SELECT) { 1684 SMC_SELECT_BANK(3); 1685 1686 /* Reset MII */ 1687 mdio_write(dev, smc->mii_if.phy_id, 0, 0x8000); 1688 1689 /* Advertise 100F, 100H, 10F, 10H */ 1690 mdio_write(dev, smc->mii_if.phy_id, 4, 0x01e1); 1691 1692 /* Restart MII autonegotiation */ 1693 mdio_write(dev, smc->mii_if.phy_id, 0, 0x0000); 1694 mdio_write(dev, smc->mii_if.phy_id, 0, 0x1200); 1695 } 1696 1697 /* Enable interrupts. */ 1698 SMC_SELECT_BANK(2); 1699 outw((IM_EPH_INT | IM_RX_OVRN_INT | IM_RCV_INT) << 8, 1700 ioaddr + INTERRUPT); 1701 } 1702 1703 /*====================================================================== 1704 1705 Media selection timer routine 1706 1707 ======================================================================*/ 1708 1709 static void media_check(u_long arg) 1710 { 1711 struct net_device *dev = (struct net_device *) arg; 1712 struct smc_private *smc = netdev_priv(dev); 1713 unsigned int ioaddr = dev->base_addr; 1714 u_short i, media, saved_bank; 1715 u_short link; 1716 unsigned long flags; 1717 1718 spin_lock_irqsave(&smc->lock, flags); 1719 1720 saved_bank = inw(ioaddr + BANK_SELECT); 1721 1722 if (!netif_device_present(dev)) 1723 goto reschedule; 1724 1725 SMC_SELECT_BANK(2); 1726 1727 /* need MC_RESET to keep the memory consistent. errata? */ 1728 if (smc->rx_ovrn) { 1729 outw(MC_RESET, ioaddr + MMU_CMD); 1730 smc->rx_ovrn = 0; 1731 } 1732 i = inw(ioaddr + INTERRUPT); 1733 SMC_SELECT_BANK(0); 1734 media = inw(ioaddr + EPH) & EPH_LINK_OK; 1735 SMC_SELECT_BANK(1); 1736 media |= (inw(ioaddr + CONFIG) & CFG_AUI_SELECT) ? 2 : 1; 1737 1738 SMC_SELECT_BANK(saved_bank); 1739 spin_unlock_irqrestore(&smc->lock, flags); 1740 1741 /* Check for pending interrupt with watchdog flag set: with 1742 this, we can limp along even if the interrupt is blocked */ 1743 if (smc->watchdog++ && ((i>>8) & i)) { 1744 if (!smc->fast_poll) 1745 netdev_info(dev, "interrupt(s) dropped!\n"); 1746 local_irq_save(flags); 1747 smc_interrupt(dev->irq, dev); 1748 local_irq_restore(flags); 1749 smc->fast_poll = HZ; 1750 } 1751 if (smc->fast_poll) { 1752 smc->fast_poll--; 1753 smc->media.expires = jiffies + HZ/100; 1754 add_timer(&smc->media); 1755 return; 1756 } 1757 1758 spin_lock_irqsave(&smc->lock, flags); 1759 1760 saved_bank = inw(ioaddr + BANK_SELECT); 1761 1762 if (smc->cfg & CFG_MII_SELECT) { 1763 if (smc->mii_if.phy_id < 0) 1764 goto reschedule; 1765 1766 SMC_SELECT_BANK(3); 1767 link = mdio_read(dev, smc->mii_if.phy_id, 1); 1768 if (!link || (link == 0xffff)) { 1769 netdev_info(dev, "MII is missing!\n"); 1770 smc->mii_if.phy_id = -1; 1771 goto reschedule; 1772 } 1773 1774 link &= 0x0004; 1775 if (link != smc->link_status) { 1776 u_short p = mdio_read(dev, smc->mii_if.phy_id, 5); 1777 netdev_info(dev, "%s link beat\n", link ? "found" : "lost"); 1778 smc->duplex = (((p & 0x0100) || ((p & 0x1c0) == 0x40)) 1779 ? TCR_FDUPLX : 0); 1780 if (link) { 1781 netdev_info(dev, "autonegotiation complete: " 1782 "%dbaseT-%cD selected\n", 1783 (p & 0x0180) ? 100 : 10, smc->duplex ? 'F' : 'H'); 1784 } 1785 SMC_SELECT_BANK(0); 1786 outw(inw(ioaddr + TCR) | smc->duplex, ioaddr + TCR); 1787 smc->link_status = link; 1788 } 1789 goto reschedule; 1790 } 1791 1792 /* Ignore collisions unless we've had no rx's recently */ 1793 if (time_after(jiffies, dev->last_rx + HZ)) { 1794 if (smc->tx_err || (smc->media_status & EPH_16COL)) 1795 media |= EPH_16COL; 1796 } 1797 smc->tx_err = 0; 1798 1799 if (media != smc->media_status) { 1800 if ((media & smc->media_status & 1) && 1801 ((smc->media_status ^ media) & EPH_LINK_OK)) 1802 netdev_info(dev, "%s link beat\n", 1803 smc->media_status & EPH_LINK_OK ? "lost" : "found"); 1804 else if ((media & smc->media_status & 2) && 1805 ((smc->media_status ^ media) & EPH_16COL)) 1806 netdev_info(dev, "coax cable %s\n", 1807 media & EPH_16COL ? "problem" : "ok"); 1808 if (dev->if_port == 0) { 1809 if (media & 1) { 1810 if (media & EPH_LINK_OK) 1811 netdev_info(dev, "flipped to 10baseT\n"); 1812 else 1813 smc_set_xcvr(dev, 2); 1814 } else { 1815 if (media & EPH_16COL) 1816 smc_set_xcvr(dev, 1); 1817 else 1818 netdev_info(dev, "flipped to 10base2\n"); 1819 } 1820 } 1821 smc->media_status = media; 1822 } 1823 1824 reschedule: 1825 smc->media.expires = jiffies + HZ; 1826 add_timer(&smc->media); 1827 SMC_SELECT_BANK(saved_bank); 1828 spin_unlock_irqrestore(&smc->lock, flags); 1829 } 1830 1831 static int smc_link_ok(struct net_device *dev) 1832 { 1833 unsigned int ioaddr = dev->base_addr; 1834 struct smc_private *smc = netdev_priv(dev); 1835 1836 if (smc->cfg & CFG_MII_SELECT) { 1837 return mii_link_ok(&smc->mii_if); 1838 } else { 1839 SMC_SELECT_BANK(0); 1840 return inw(ioaddr + EPH) & EPH_LINK_OK; 1841 } 1842 } 1843 1844 static int smc_netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd) 1845 { 1846 u16 tmp; 1847 unsigned int ioaddr = dev->base_addr; 1848 1849 ecmd->supported = (SUPPORTED_TP | SUPPORTED_AUI | 1850 SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full); 1851 1852 SMC_SELECT_BANK(1); 1853 tmp = inw(ioaddr + CONFIG); 1854 ecmd->port = (tmp & CFG_AUI_SELECT) ? PORT_AUI : PORT_TP; 1855 ecmd->transceiver = XCVR_INTERNAL; 1856 ethtool_cmd_speed_set(ecmd, SPEED_10); 1857 ecmd->phy_address = ioaddr + MGMT; 1858 1859 SMC_SELECT_BANK(0); 1860 tmp = inw(ioaddr + TCR); 1861 ecmd->duplex = (tmp & TCR_FDUPLX) ? DUPLEX_FULL : DUPLEX_HALF; 1862 1863 return 0; 1864 } 1865 1866 static int smc_netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd) 1867 { 1868 u16 tmp; 1869 unsigned int ioaddr = dev->base_addr; 1870 1871 if (ethtool_cmd_speed(ecmd) != SPEED_10) 1872 return -EINVAL; 1873 if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL) 1874 return -EINVAL; 1875 if (ecmd->port != PORT_TP && ecmd->port != PORT_AUI) 1876 return -EINVAL; 1877 if (ecmd->transceiver != XCVR_INTERNAL) 1878 return -EINVAL; 1879 1880 if (ecmd->port == PORT_AUI) 1881 smc_set_xcvr(dev, 1); 1882 else 1883 smc_set_xcvr(dev, 0); 1884 1885 SMC_SELECT_BANK(0); 1886 tmp = inw(ioaddr + TCR); 1887 if (ecmd->duplex == DUPLEX_FULL) 1888 tmp |= TCR_FDUPLX; 1889 else 1890 tmp &= ~TCR_FDUPLX; 1891 outw(tmp, ioaddr + TCR); 1892 1893 return 0; 1894 } 1895 1896 static int check_if_running(struct net_device *dev) 1897 { 1898 if (!netif_running(dev)) 1899 return -EINVAL; 1900 return 0; 1901 } 1902 1903 static void smc_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) 1904 { 1905 strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); 1906 strlcpy(info->version, DRV_VERSION, sizeof(info->version)); 1907 } 1908 1909 static int smc_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) 1910 { 1911 struct smc_private *smc = netdev_priv(dev); 1912 unsigned int ioaddr = dev->base_addr; 1913 u16 saved_bank = inw(ioaddr + BANK_SELECT); 1914 int ret; 1915 unsigned long flags; 1916 1917 spin_lock_irqsave(&smc->lock, flags); 1918 SMC_SELECT_BANK(3); 1919 if (smc->cfg & CFG_MII_SELECT) 1920 ret = mii_ethtool_gset(&smc->mii_if, ecmd); 1921 else 1922 ret = smc_netdev_get_ecmd(dev, ecmd); 1923 SMC_SELECT_BANK(saved_bank); 1924 spin_unlock_irqrestore(&smc->lock, flags); 1925 return ret; 1926 } 1927 1928 static int smc_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) 1929 { 1930 struct smc_private *smc = netdev_priv(dev); 1931 unsigned int ioaddr = dev->base_addr; 1932 u16 saved_bank = inw(ioaddr + BANK_SELECT); 1933 int ret; 1934 unsigned long flags; 1935 1936 spin_lock_irqsave(&smc->lock, flags); 1937 SMC_SELECT_BANK(3); 1938 if (smc->cfg & CFG_MII_SELECT) 1939 ret = mii_ethtool_sset(&smc->mii_if, ecmd); 1940 else 1941 ret = smc_netdev_set_ecmd(dev, ecmd); 1942 SMC_SELECT_BANK(saved_bank); 1943 spin_unlock_irqrestore(&smc->lock, flags); 1944 return ret; 1945 } 1946 1947 static u32 smc_get_link(struct net_device *dev) 1948 { 1949 struct smc_private *smc = netdev_priv(dev); 1950 unsigned int ioaddr = dev->base_addr; 1951 u16 saved_bank = inw(ioaddr + BANK_SELECT); 1952 u32 ret; 1953 unsigned long flags; 1954 1955 spin_lock_irqsave(&smc->lock, flags); 1956 SMC_SELECT_BANK(3); 1957 ret = smc_link_ok(dev); 1958 SMC_SELECT_BANK(saved_bank); 1959 spin_unlock_irqrestore(&smc->lock, flags); 1960 return ret; 1961 } 1962 1963 static int smc_nway_reset(struct net_device *dev) 1964 { 1965 struct smc_private *smc = netdev_priv(dev); 1966 if (smc->cfg & CFG_MII_SELECT) { 1967 unsigned int ioaddr = dev->base_addr; 1968 u16 saved_bank = inw(ioaddr + BANK_SELECT); 1969 int res; 1970 1971 SMC_SELECT_BANK(3); 1972 res = mii_nway_restart(&smc->mii_if); 1973 SMC_SELECT_BANK(saved_bank); 1974 1975 return res; 1976 } else 1977 return -EOPNOTSUPP; 1978 } 1979 1980 static const struct ethtool_ops ethtool_ops = { 1981 .begin = check_if_running, 1982 .get_drvinfo = smc_get_drvinfo, 1983 .get_settings = smc_get_settings, 1984 .set_settings = smc_set_settings, 1985 .get_link = smc_get_link, 1986 .nway_reset = smc_nway_reset, 1987 }; 1988 1989 static int smc_ioctl (struct net_device *dev, struct ifreq *rq, int cmd) 1990 { 1991 struct smc_private *smc = netdev_priv(dev); 1992 struct mii_ioctl_data *mii = if_mii(rq); 1993 int rc = 0; 1994 u16 saved_bank; 1995 unsigned int ioaddr = dev->base_addr; 1996 unsigned long flags; 1997 1998 if (!netif_running(dev)) 1999 return -EINVAL; 2000 2001 spin_lock_irqsave(&smc->lock, flags); 2002 saved_bank = inw(ioaddr + BANK_SELECT); 2003 SMC_SELECT_BANK(3); 2004 rc = generic_mii_ioctl(&smc->mii_if, mii, cmd, NULL); 2005 SMC_SELECT_BANK(saved_bank); 2006 spin_unlock_irqrestore(&smc->lock, flags); 2007 return rc; 2008 } 2009 2010 static const struct pcmcia_device_id smc91c92_ids[] = { 2011 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0109, 0x0501), 2012 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0140, 0x000a), 2013 PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63), 2014 PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63), 2015 PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef), 2016 PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef), 2017 PCMCIA_PFC_DEVICE_PROD_ID12(0, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c), 2018 PCMCIA_PFC_DEVICE_PROD_ID12(0, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e), 2019 PCMCIA_PFC_DEVICE_PROD_ID12(0, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9), 2020 PCMCIA_PFC_DEVICE_PROD_ID12(0, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed), 2021 PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x016c, 0x0020), 2022 PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0023), 2023 PCMCIA_DEVICE_PROD_ID123("BASICS by New Media Corporation", "Ethernet", "SMC91C94", 0x23c78a9d, 0x00b2e941, 0xcef397fb), 2024 PCMCIA_DEVICE_PROD_ID12("ARGOSY", "Fast Ethernet PCCard", 0x78f308dc, 0xdcea68bc), 2025 PCMCIA_DEVICE_PROD_ID12("dit Co., Ltd.", "PC Card-10/100BTX", 0xe59365c8, 0x6a2161d1), 2026 PCMCIA_DEVICE_PROD_ID12("DYNALINK", "L100C", 0x6a26d1cf, 0xc16ce9c5), 2027 PCMCIA_DEVICE_PROD_ID12("Farallon", "Farallon Enet", 0x58d93fc4, 0x244734e9), 2028 PCMCIA_DEVICE_PROD_ID12("Megahertz", "CC10BT/2", 0x33234748, 0x3c95b953), 2029 PCMCIA_DEVICE_PROD_ID12("MELCO/SMC", "LPC-TX", 0xa2cd8e6d, 0x42da662a), 2030 PCMCIA_DEVICE_PROD_ID12("Ositech", "Trumpcard:Four of Diamonds Ethernet", 0xc2f80cd, 0xb3466314), 2031 PCMCIA_DEVICE_PROD_ID12("Ositech", "Trumpcard:Seven of Diamonds Ethernet", 0xc2f80cd, 0x194b650a), 2032 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Fast Ethernet PCCard", 0x281f1c5d, 0xdcea68bc), 2033 PCMCIA_DEVICE_PROD_ID12("Psion", "10Mb Ethernet", 0x4ef00b21, 0x844be9e9), 2034 PCMCIA_DEVICE_PROD_ID12("SMC", "EtherEZ Ethernet 8020", 0xc4f8b18b, 0x4a0eeb2d), 2035 /* These conflict with other cards! */ 2036 /* PCMCIA_DEVICE_MANF_CARD(0x0186, 0x0100), */ 2037 /* PCMCIA_DEVICE_MANF_CARD(0x8a01, 0xc1ab), */ 2038 PCMCIA_DEVICE_NULL, 2039 }; 2040 MODULE_DEVICE_TABLE(pcmcia, smc91c92_ids); 2041 2042 static struct pcmcia_driver smc91c92_cs_driver = { 2043 .owner = THIS_MODULE, 2044 .name = "smc91c92_cs", 2045 .probe = smc91c92_probe, 2046 .remove = smc91c92_detach, 2047 .id_table = smc91c92_ids, 2048 .suspend = smc91c92_suspend, 2049 .resume = smc91c92_resume, 2050 }; 2051 module_pcmcia_driver(smc91c92_cs_driver); 2052