1 /* epic100.c: A SMC 83c170 EPIC/100 Fast Ethernet driver for Linux. */
2 /*
3 	Written/copyright 1997-2001 by Donald Becker.
4 
5 	This software may be used and distributed according to the terms of
6 	the GNU General Public License (GPL), incorporated herein by reference.
7 	Drivers based on or derived from this code fall under the GPL and must
8 	retain the authorship, copyright and license notice.  This file is not
9 	a complete program and may only be used when the entire operating
10 	system is licensed under the GPL.
11 
12 	This driver is for the SMC83c170/175 "EPIC" series, as used on the
13 	SMC EtherPower II 9432 PCI adapter, and several CardBus cards.
14 
15 	The author may be reached as becker@scyld.com, or C/O
16 	Scyld Computing Corporation
17 	410 Severn Ave., Suite 210
18 	Annapolis MD 21403
19 
20 	Information and updates available at
21 	http://www.scyld.com/network/epic100.html
22 	[this link no longer provides anything useful -jgarzik]
23 
24 	---------------------------------------------------------------------
25 
26 */
27 
28 #define DRV_NAME        "epic100"
29 #define DRV_VERSION     "2.1"
30 #define DRV_RELDATE     "Sept 11, 2006"
31 
32 /* The user-configurable values.
33    These may be modified when a driver module is loaded.*/
34 
35 static int debug = 1;			/* 1 normal messages, 0 quiet .. 7 verbose. */
36 
37 /* Used to pass the full-duplex flag, etc. */
38 #define MAX_UNITS 8		/* More are supported, limit only on options */
39 static int options[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
40 static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
41 
42 /* Set the copy breakpoint for the copy-only-tiny-frames scheme.
43    Setting to > 1518 effectively disables this feature. */
44 static int rx_copybreak;
45 
46 /* Operational parameters that are set at compile time. */
47 
48 /* Keep the ring sizes a power of two for operational efficiency.
49    The compiler will convert <unsigned>'%'<2^N> into a bit mask.
50    Making the Tx ring too large decreases the effectiveness of channel
51    bonding and packet priority.
52    There are no ill effects from too-large receive rings. */
53 #define TX_RING_SIZE	256
54 #define TX_QUEUE_LEN	240		/* Limit ring entries actually used.  */
55 #define RX_RING_SIZE	256
56 #define TX_TOTAL_SIZE	TX_RING_SIZE*sizeof(struct epic_tx_desc)
57 #define RX_TOTAL_SIZE	RX_RING_SIZE*sizeof(struct epic_rx_desc)
58 
59 /* Operational parameters that usually are not changed. */
60 /* Time in jiffies before concluding the transmitter is hung. */
61 #define TX_TIMEOUT  (2*HZ)
62 
63 #define PKT_BUF_SZ		1536			/* Size of each temporary Rx buffer.*/
64 
65 /* Bytes transferred to chip before transmission starts. */
66 /* Initial threshold, increased on underflow, rounded down to 4 byte units. */
67 #define TX_FIFO_THRESH 256
68 #define RX_FIFO_THRESH 1		/* 0-3, 0==32, 64,96, or 3==128 bytes  */
69 
70 #include <linux/module.h>
71 #include <linux/kernel.h>
72 #include <linux/string.h>
73 #include <linux/timer.h>
74 #include <linux/errno.h>
75 #include <linux/ioport.h>
76 #include <linux/interrupt.h>
77 #include <linux/pci.h>
78 #include <linux/delay.h>
79 #include <linux/netdevice.h>
80 #include <linux/etherdevice.h>
81 #include <linux/skbuff.h>
82 #include <linux/init.h>
83 #include <linux/spinlock.h>
84 #include <linux/ethtool.h>
85 #include <linux/mii.h>
86 #include <linux/crc32.h>
87 #include <linux/bitops.h>
88 #include <asm/io.h>
89 #include <linux/uaccess.h>
90 #include <asm/byteorder.h>
91 
92 /* These identify the driver base version and may not be removed. */
93 static char version[] =
94 DRV_NAME ".c:v1.11 1/7/2001 Written by Donald Becker <becker@scyld.com>";
95 static char version2[] =
96 "  (unofficial 2.4.x kernel port, version " DRV_VERSION ", " DRV_RELDATE ")";
97 
98 MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
99 MODULE_DESCRIPTION("SMC 83c170 EPIC series Ethernet driver");
100 MODULE_LICENSE("GPL");
101 
102 module_param(debug, int, 0);
103 module_param(rx_copybreak, int, 0);
104 module_param_array(options, int, NULL, 0);
105 module_param_array(full_duplex, int, NULL, 0);
106 MODULE_PARM_DESC(debug, "EPIC/100 debug level (0-5)");
107 MODULE_PARM_DESC(options, "EPIC/100: Bits 0-3: media type, bit 4: full duplex");
108 MODULE_PARM_DESC(rx_copybreak, "EPIC/100 copy breakpoint for copy-only-tiny-frames");
109 MODULE_PARM_DESC(full_duplex, "EPIC/100 full duplex setting(s) (1)");
110 
111 /*
112 				Theory of Operation
113 
114 I. Board Compatibility
115 
116 This device driver is designed for the SMC "EPIC/100", the SMC
117 single-chip Ethernet controllers for PCI.  This chip is used on
118 the SMC EtherPower II boards.
119 
120 II. Board-specific settings
121 
122 PCI bus devices are configured by the system at boot time, so no jumpers
123 need to be set on the board.  The system BIOS will assign the
124 PCI INTA signal to a (preferably otherwise unused) system IRQ line.
125 Note: Kernel versions earlier than 1.3.73 do not support shared PCI
126 interrupt lines.
127 
128 III. Driver operation
129 
130 IIIa. Ring buffers
131 
132 IVb. References
133 
134 http://www.smsc.com/media/Downloads_Public/discontinued/83c171.pdf
135 http://www.smsc.com/media/Downloads_Public/discontinued/83c175.pdf
136 http://scyld.com/expert/NWay.html
137 http://www.national.com/pf/DP/DP83840A.html
138 
139 IVc. Errata
140 
141 */
142 
143 
144 enum chip_capability_flags { MII_PWRDWN=1, TYPE2_INTR=2, NO_MII=4 };
145 
146 #define EPIC_TOTAL_SIZE 0x100
147 #define USE_IO_OPS 1
148 
149 #ifdef USE_IO_OPS
150 #define EPIC_BAR	0
151 #else
152 #define EPIC_BAR	1
153 #endif
154 
155 typedef enum {
156 	SMSC_83C170_0,
157 	SMSC_83C170,
158 	SMSC_83C175,
159 } chip_t;
160 
161 
162 struct epic_chip_info {
163 	const char *name;
164         int drv_flags;                          /* Driver use, intended as capability flags. */
165 };
166 
167 
168 /* indexed by chip_t */
169 static const struct epic_chip_info pci_id_tbl[] = {
170 	{ "SMSC EPIC/100 83c170",	TYPE2_INTR | NO_MII | MII_PWRDWN },
171 	{ "SMSC EPIC/100 83c170",	TYPE2_INTR },
172 	{ "SMSC EPIC/C 83c175",		TYPE2_INTR | MII_PWRDWN },
173 };
174 
175 
176 static const struct pci_device_id epic_pci_tbl[] = {
177 	{ 0x10B8, 0x0005, 0x1092, 0x0AB4, 0, 0, SMSC_83C170_0 },
178 	{ 0x10B8, 0x0005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, SMSC_83C170 },
179 	{ 0x10B8, 0x0006, PCI_ANY_ID, PCI_ANY_ID,
180 	  PCI_CLASS_NETWORK_ETHERNET << 8, 0xffff00, SMSC_83C175 },
181 	{ 0,}
182 };
183 MODULE_DEVICE_TABLE (pci, epic_pci_tbl);
184 
185 #define ew16(reg, val)	iowrite16(val, ioaddr + (reg))
186 #define ew32(reg, val)	iowrite32(val, ioaddr + (reg))
187 #define er8(reg)	ioread8(ioaddr + (reg))
188 #define er16(reg)	ioread16(ioaddr + (reg))
189 #define er32(reg)	ioread32(ioaddr + (reg))
190 
191 /* Offsets to registers, using the (ugh) SMC names. */
192 enum epic_registers {
193   COMMAND=0, INTSTAT=4, INTMASK=8, GENCTL=0x0C, NVCTL=0x10, EECTL=0x14,
194   PCIBurstCnt=0x18,
195   TEST1=0x1C, CRCCNT=0x20, ALICNT=0x24, MPCNT=0x28,	/* Rx error counters. */
196   MIICtrl=0x30, MIIData=0x34, MIICfg=0x38,
197   LAN0=64,						/* MAC address. */
198   MC0=80,						/* Multicast filter table. */
199   RxCtrl=96, TxCtrl=112, TxSTAT=0x74,
200   PRxCDAR=0x84, RxSTAT=0xA4, EarlyRx=0xB0, PTxCDAR=0xC4, TxThresh=0xDC,
201 };
202 
203 /* Interrupt register bits, using my own meaningful names. */
204 enum IntrStatus {
205 	TxIdle=0x40000, RxIdle=0x20000, IntrSummary=0x010000,
206 	PCIBusErr170=0x7000, PCIBusErr175=0x1000, PhyEvent175=0x8000,
207 	RxStarted=0x0800, RxEarlyWarn=0x0400, CntFull=0x0200, TxUnderrun=0x0100,
208 	TxEmpty=0x0080, TxDone=0x0020, RxError=0x0010,
209 	RxOverflow=0x0008, RxFull=0x0004, RxHeader=0x0002, RxDone=0x0001,
210 };
211 enum CommandBits {
212 	StopRx=1, StartRx=2, TxQueued=4, RxQueued=8,
213 	StopTxDMA=0x20, StopRxDMA=0x40, RestartTx=0x80,
214 };
215 
216 #define EpicRemoved	0xffffffff	/* Chip failed or removed (CardBus) */
217 
218 #define EpicNapiEvent	(TxEmpty | TxDone | \
219 			 RxDone | RxStarted | RxEarlyWarn | RxOverflow | RxFull)
220 #define EpicNormalEvent	(0x0000ffff & ~EpicNapiEvent)
221 
222 static const u16 media2miictl[16] = {
223 	0, 0x0C00, 0x0C00, 0x2000,  0x0100, 0x2100, 0, 0,
224 	0, 0, 0, 0,  0, 0, 0, 0 };
225 
226 /*
227  * The EPIC100 Rx and Tx buffer descriptors.  Note that these
228  * really ARE host-endian; it's not a misannotation.  We tell
229  * the card to byteswap them internally on big-endian hosts -
230  * look for #ifdef __BIG_ENDIAN in epic_open().
231  */
232 
233 struct epic_tx_desc {
234 	u32 txstatus;
235 	u32 bufaddr;
236 	u32 buflength;
237 	u32 next;
238 };
239 
240 struct epic_rx_desc {
241 	u32 rxstatus;
242 	u32 bufaddr;
243 	u32 buflength;
244 	u32 next;
245 };
246 
247 enum desc_status_bits {
248 	DescOwn=0x8000,
249 };
250 
251 #define PRIV_ALIGN	15 	/* Required alignment mask */
252 struct epic_private {
253 	struct epic_rx_desc *rx_ring;
254 	struct epic_tx_desc *tx_ring;
255 	/* The saved address of a sent-in-place packet/buffer, for skfree(). */
256 	struct sk_buff* tx_skbuff[TX_RING_SIZE];
257 	/* The addresses of receive-in-place skbuffs. */
258 	struct sk_buff* rx_skbuff[RX_RING_SIZE];
259 
260 	dma_addr_t tx_ring_dma;
261 	dma_addr_t rx_ring_dma;
262 
263 	/* Ring pointers. */
264 	spinlock_t lock;				/* Group with Tx control cache line. */
265 	spinlock_t napi_lock;
266 	struct napi_struct napi;
267 	unsigned int cur_tx, dirty_tx;
268 
269 	unsigned int cur_rx, dirty_rx;
270 	u32 irq_mask;
271 	unsigned int rx_buf_sz;				/* Based on MTU+slack. */
272 
273 	void __iomem *ioaddr;
274 	struct pci_dev *pci_dev;			/* PCI bus location. */
275 	int chip_id, chip_flags;
276 
277 	struct timer_list timer;			/* Media selection timer. */
278 	int tx_threshold;
279 	unsigned char mc_filter[8];
280 	signed char phys[4];				/* MII device addresses. */
281 	u16 advertising;					/* NWay media advertisement */
282 	int mii_phy_cnt;
283 	u32 ethtool_ops_nesting;
284 	struct mii_if_info mii;
285 	unsigned int tx_full:1;				/* The Tx queue is full. */
286 	unsigned int default_port:4;		/* Last dev->if_port value. */
287 };
288 
289 static int epic_open(struct net_device *dev);
290 static int read_eeprom(struct epic_private *, int);
291 static int mdio_read(struct net_device *dev, int phy_id, int location);
292 static void mdio_write(struct net_device *dev, int phy_id, int loc, int val);
293 static void epic_restart(struct net_device *dev);
294 static void epic_timer(struct timer_list *t);
295 static void epic_tx_timeout(struct net_device *dev, unsigned int txqueue);
296 static void epic_init_ring(struct net_device *dev);
297 static netdev_tx_t epic_start_xmit(struct sk_buff *skb,
298 				   struct net_device *dev);
299 static int epic_rx(struct net_device *dev, int budget);
300 static int epic_poll(struct napi_struct *napi, int budget);
301 static irqreturn_t epic_interrupt(int irq, void *dev_instance);
302 static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
303 static const struct ethtool_ops netdev_ethtool_ops;
304 static int epic_close(struct net_device *dev);
305 static struct net_device_stats *epic_get_stats(struct net_device *dev);
306 static void set_rx_mode(struct net_device *dev);
307 
308 static const struct net_device_ops epic_netdev_ops = {
309 	.ndo_open		= epic_open,
310 	.ndo_stop		= epic_close,
311 	.ndo_start_xmit		= epic_start_xmit,
312 	.ndo_tx_timeout 	= epic_tx_timeout,
313 	.ndo_get_stats		= epic_get_stats,
314 	.ndo_set_rx_mode	= set_rx_mode,
315 	.ndo_eth_ioctl		= netdev_ioctl,
316 	.ndo_set_mac_address 	= eth_mac_addr,
317 	.ndo_validate_addr	= eth_validate_addr,
318 };
319 
320 static int epic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
321 {
322 	static int card_idx = -1;
323 	void __iomem *ioaddr;
324 	int chip_idx = (int) ent->driver_data;
325 	struct net_device *dev;
326 	struct epic_private *ep;
327 	int i, ret, option = 0, duplex = 0;
328 	__le16 addr[ETH_ALEN / 2];
329 	void *ring_space;
330 	dma_addr_t ring_dma;
331 
332 /* when built into the kernel, we only print version if device is found */
333 #ifndef MODULE
334 	pr_info_once("%s%s\n", version, version2);
335 #endif
336 
337 	card_idx++;
338 
339 	ret = pci_enable_device(pdev);
340 	if (ret)
341 		goto out;
342 
343 	if (pci_resource_len(pdev, 0) < EPIC_TOTAL_SIZE) {
344 		dev_err(&pdev->dev, "no PCI region space\n");
345 		ret = -ENODEV;
346 		goto err_out_disable;
347 	}
348 
349 	pci_set_master(pdev);
350 
351 	ret = pci_request_regions(pdev, DRV_NAME);
352 	if (ret < 0)
353 		goto err_out_disable;
354 
355 	ret = -ENOMEM;
356 
357 	dev = alloc_etherdev(sizeof (*ep));
358 	if (!dev)
359 		goto err_out_free_res;
360 
361 	SET_NETDEV_DEV(dev, &pdev->dev);
362 
363 	ioaddr = pci_iomap(pdev, EPIC_BAR, 0);
364 	if (!ioaddr) {
365 		dev_err(&pdev->dev, "ioremap failed\n");
366 		goto err_out_free_netdev;
367 	}
368 
369 	pci_set_drvdata(pdev, dev);
370 	ep = netdev_priv(dev);
371 	ep->ioaddr = ioaddr;
372 	ep->mii.dev = dev;
373 	ep->mii.mdio_read = mdio_read;
374 	ep->mii.mdio_write = mdio_write;
375 	ep->mii.phy_id_mask = 0x1f;
376 	ep->mii.reg_num_mask = 0x1f;
377 
378 	ring_space = dma_alloc_coherent(&pdev->dev, TX_TOTAL_SIZE, &ring_dma,
379 					GFP_KERNEL);
380 	if (!ring_space)
381 		goto err_out_iounmap;
382 	ep->tx_ring = ring_space;
383 	ep->tx_ring_dma = ring_dma;
384 
385 	ring_space = dma_alloc_coherent(&pdev->dev, RX_TOTAL_SIZE, &ring_dma,
386 					GFP_KERNEL);
387 	if (!ring_space)
388 		goto err_out_unmap_tx;
389 	ep->rx_ring = ring_space;
390 	ep->rx_ring_dma = ring_dma;
391 
392 	if (dev->mem_start) {
393 		option = dev->mem_start;
394 		duplex = (dev->mem_start & 16) ? 1 : 0;
395 	} else if (card_idx >= 0  &&  card_idx < MAX_UNITS) {
396 		if (options[card_idx] >= 0)
397 			option = options[card_idx];
398 		if (full_duplex[card_idx] >= 0)
399 			duplex = full_duplex[card_idx];
400 	}
401 
402 	spin_lock_init(&ep->lock);
403 	spin_lock_init(&ep->napi_lock);
404 
405 	/* Bring the chip out of low-power mode. */
406 	ew32(GENCTL, 0x4200);
407 	/* Magic?!  If we don't set this bit the MII interface won't work. */
408 	/* This magic is documented in SMSC app note 7.15 */
409 	for (i = 16; i > 0; i--)
410 		ew32(TEST1, 0x0008);
411 
412 	/* Turn on the MII transceiver. */
413 	ew32(MIICfg, 0x12);
414 	if (chip_idx == 1)
415 		ew32(NVCTL, (er32(NVCTL) & ~0x003c) | 0x4800);
416 	ew32(GENCTL, 0x0200);
417 
418 	/* Note: the '175 does not have a serial EEPROM. */
419 	for (i = 0; i < 3; i++)
420 		addr[i] = cpu_to_le16(er16(LAN0 + i*4));
421 	eth_hw_addr_set(dev, (u8 *)addr);
422 
423 	if (debug > 2) {
424 		dev_dbg(&pdev->dev, "EEPROM contents:\n");
425 		for (i = 0; i < 64; i++)
426 			pr_cont(" %4.4x%s", read_eeprom(ep, i),
427 				   i % 16 == 15 ? "\n" : "");
428 	}
429 
430 	ep->pci_dev = pdev;
431 	ep->chip_id = chip_idx;
432 	ep->chip_flags = pci_id_tbl[chip_idx].drv_flags;
433 	ep->irq_mask =
434 		(ep->chip_flags & TYPE2_INTR ?  PCIBusErr175 : PCIBusErr170)
435 		 | CntFull | TxUnderrun | EpicNapiEvent;
436 
437 	/* Find the connected MII xcvrs.
438 	   Doing this in open() would allow detecting external xcvrs later, but
439 	   takes much time and no cards have external MII. */
440 	{
441 		int phy, phy_idx = 0;
442 		for (phy = 1; phy < 32 && phy_idx < sizeof(ep->phys); phy++) {
443 			int mii_status = mdio_read(dev, phy, MII_BMSR);
444 			if (mii_status != 0xffff  &&  mii_status != 0x0000) {
445 				ep->phys[phy_idx++] = phy;
446 				dev_info(&pdev->dev,
447 					"MII transceiver #%d control "
448 					"%4.4x status %4.4x.\n",
449 					phy, mdio_read(dev, phy, 0), mii_status);
450 			}
451 		}
452 		ep->mii_phy_cnt = phy_idx;
453 		if (phy_idx != 0) {
454 			phy = ep->phys[0];
455 			ep->mii.advertising = mdio_read(dev, phy, MII_ADVERTISE);
456 			dev_info(&pdev->dev,
457 				"Autonegotiation advertising %4.4x link "
458 				   "partner %4.4x.\n",
459 				   ep->mii.advertising, mdio_read(dev, phy, 5));
460 		} else if ( ! (ep->chip_flags & NO_MII)) {
461 			dev_warn(&pdev->dev,
462 				"***WARNING***: No MII transceiver found!\n");
463 			/* Use the known PHY address of the EPII. */
464 			ep->phys[0] = 3;
465 		}
466 		ep->mii.phy_id = ep->phys[0];
467 	}
468 
469 	/* Turn off the MII xcvr (175 only!), leave the chip in low-power mode. */
470 	if (ep->chip_flags & MII_PWRDWN)
471 		ew32(NVCTL, er32(NVCTL) & ~0x483c);
472 	ew32(GENCTL, 0x0008);
473 
474 	/* The lower four bits are the media type. */
475 	if (duplex) {
476 		ep->mii.force_media = ep->mii.full_duplex = 1;
477 		dev_info(&pdev->dev, "Forced full duplex requested.\n");
478 	}
479 	dev->if_port = ep->default_port = option;
480 
481 	/* The Epic-specific entries in the device structure. */
482 	dev->netdev_ops = &epic_netdev_ops;
483 	dev->ethtool_ops = &netdev_ethtool_ops;
484 	dev->watchdog_timeo = TX_TIMEOUT;
485 	netif_napi_add(dev, &ep->napi, epic_poll, 64);
486 
487 	ret = register_netdev(dev);
488 	if (ret < 0)
489 		goto err_out_unmap_rx;
490 
491 	netdev_info(dev, "%s at %lx, IRQ %d, %pM\n",
492 		    pci_id_tbl[chip_idx].name,
493 		    (long)pci_resource_start(pdev, EPIC_BAR), pdev->irq,
494 		    dev->dev_addr);
495 
496 out:
497 	return ret;
498 
499 err_out_unmap_rx:
500 	dma_free_coherent(&pdev->dev, RX_TOTAL_SIZE, ep->rx_ring,
501 			  ep->rx_ring_dma);
502 err_out_unmap_tx:
503 	dma_free_coherent(&pdev->dev, TX_TOTAL_SIZE, ep->tx_ring,
504 			  ep->tx_ring_dma);
505 err_out_iounmap:
506 	pci_iounmap(pdev, ioaddr);
507 err_out_free_netdev:
508 	free_netdev(dev);
509 err_out_free_res:
510 	pci_release_regions(pdev);
511 err_out_disable:
512 	pci_disable_device(pdev);
513 	goto out;
514 }
515 
516 /* Serial EEPROM section. */
517 
518 /*  EEPROM_Ctrl bits. */
519 #define EE_SHIFT_CLK	0x04	/* EEPROM shift clock. */
520 #define EE_CS			0x02	/* EEPROM chip select. */
521 #define EE_DATA_WRITE	0x08	/* EEPROM chip data in. */
522 #define EE_WRITE_0		0x01
523 #define EE_WRITE_1		0x09
524 #define EE_DATA_READ	0x10	/* EEPROM chip data out. */
525 #define EE_ENB			(0x0001 | EE_CS)
526 
527 /* Delay between EEPROM clock transitions.
528    This serves to flush the operation to the PCI bus.
529  */
530 
531 #define eeprom_delay()	er32(EECTL)
532 
533 /* The EEPROM commands include the alway-set leading bit. */
534 #define EE_WRITE_CMD	(5 << 6)
535 #define EE_READ64_CMD	(6 << 6)
536 #define EE_READ256_CMD	(6 << 8)
537 #define EE_ERASE_CMD	(7 << 6)
538 
539 static void epic_disable_int(struct net_device *dev, struct epic_private *ep)
540 {
541 	void __iomem *ioaddr = ep->ioaddr;
542 
543 	ew32(INTMASK, 0x00000000);
544 }
545 
546 static inline void __epic_pci_commit(void __iomem *ioaddr)
547 {
548 #ifndef USE_IO_OPS
549 	er32(INTMASK);
550 #endif
551 }
552 
553 static inline void epic_napi_irq_off(struct net_device *dev,
554 				     struct epic_private *ep)
555 {
556 	void __iomem *ioaddr = ep->ioaddr;
557 
558 	ew32(INTMASK, ep->irq_mask & ~EpicNapiEvent);
559 	__epic_pci_commit(ioaddr);
560 }
561 
562 static inline void epic_napi_irq_on(struct net_device *dev,
563 				    struct epic_private *ep)
564 {
565 	void __iomem *ioaddr = ep->ioaddr;
566 
567 	/* No need to commit possible posted write */
568 	ew32(INTMASK, ep->irq_mask | EpicNapiEvent);
569 }
570 
571 static int read_eeprom(struct epic_private *ep, int location)
572 {
573 	void __iomem *ioaddr = ep->ioaddr;
574 	int i;
575 	int retval = 0;
576 	int read_cmd = location |
577 		(er32(EECTL) & 0x40 ? EE_READ64_CMD : EE_READ256_CMD);
578 
579 	ew32(EECTL, EE_ENB & ~EE_CS);
580 	ew32(EECTL, EE_ENB);
581 
582 	/* Shift the read command bits out. */
583 	for (i = 12; i >= 0; i--) {
584 		short dataval = (read_cmd & (1 << i)) ? EE_WRITE_1 : EE_WRITE_0;
585 		ew32(EECTL, EE_ENB | dataval);
586 		eeprom_delay();
587 		ew32(EECTL, EE_ENB | dataval | EE_SHIFT_CLK);
588 		eeprom_delay();
589 	}
590 	ew32(EECTL, EE_ENB);
591 
592 	for (i = 16; i > 0; i--) {
593 		ew32(EECTL, EE_ENB | EE_SHIFT_CLK);
594 		eeprom_delay();
595 		retval = (retval << 1) | ((er32(EECTL) & EE_DATA_READ) ? 1 : 0);
596 		ew32(EECTL, EE_ENB);
597 		eeprom_delay();
598 	}
599 
600 	/* Terminate the EEPROM access. */
601 	ew32(EECTL, EE_ENB & ~EE_CS);
602 	return retval;
603 }
604 
605 #define MII_READOP		1
606 #define MII_WRITEOP		2
607 static int mdio_read(struct net_device *dev, int phy_id, int location)
608 {
609 	struct epic_private *ep = netdev_priv(dev);
610 	void __iomem *ioaddr = ep->ioaddr;
611 	int read_cmd = (phy_id << 9) | (location << 4) | MII_READOP;
612 	int i;
613 
614 	ew32(MIICtrl, read_cmd);
615 	/* Typical operation takes 25 loops. */
616 	for (i = 400; i > 0; i--) {
617 		barrier();
618 		if ((er32(MIICtrl) & MII_READOP) == 0) {
619 			/* Work around read failure bug. */
620 			if (phy_id == 1 && location < 6 &&
621 			    er16(MIIData) == 0xffff) {
622 				ew32(MIICtrl, read_cmd);
623 				continue;
624 			}
625 			return er16(MIIData);
626 		}
627 	}
628 	return 0xffff;
629 }
630 
631 static void mdio_write(struct net_device *dev, int phy_id, int loc, int value)
632 {
633 	struct epic_private *ep = netdev_priv(dev);
634 	void __iomem *ioaddr = ep->ioaddr;
635 	int i;
636 
637 	ew16(MIIData, value);
638 	ew32(MIICtrl, (phy_id << 9) | (loc << 4) | MII_WRITEOP);
639 	for (i = 10000; i > 0; i--) {
640 		barrier();
641 		if ((er32(MIICtrl) & MII_WRITEOP) == 0)
642 			break;
643 	}
644 }
645 
646 
647 static int epic_open(struct net_device *dev)
648 {
649 	struct epic_private *ep = netdev_priv(dev);
650 	void __iomem *ioaddr = ep->ioaddr;
651 	const int irq = ep->pci_dev->irq;
652 	int rc, i;
653 
654 	/* Soft reset the chip. */
655 	ew32(GENCTL, 0x4001);
656 
657 	napi_enable(&ep->napi);
658 	rc = request_irq(irq, epic_interrupt, IRQF_SHARED, dev->name, dev);
659 	if (rc) {
660 		napi_disable(&ep->napi);
661 		return rc;
662 	}
663 
664 	epic_init_ring(dev);
665 
666 	ew32(GENCTL, 0x4000);
667 	/* This magic is documented in SMSC app note 7.15 */
668 	for (i = 16; i > 0; i--)
669 		ew32(TEST1, 0x0008);
670 
671 	/* Pull the chip out of low-power mode, enable interrupts, and set for
672 	   PCI read multiple.  The MIIcfg setting and strange write order are
673 	   required by the details of which bits are reset and the transceiver
674 	   wiring on the Ositech CardBus card.
675 	*/
676 #if 0
677 	ew32(MIICfg, dev->if_port == 1 ? 0x13 : 0x12);
678 #endif
679 	if (ep->chip_flags & MII_PWRDWN)
680 		ew32(NVCTL, (er32(NVCTL) & ~0x003c) | 0x4800);
681 
682 	/* Tell the chip to byteswap descriptors on big-endian hosts */
683 #ifdef __BIG_ENDIAN
684 	ew32(GENCTL, 0x4432 | (RX_FIFO_THRESH << 8));
685 	er32(GENCTL);
686 	ew32(GENCTL, 0x0432 | (RX_FIFO_THRESH << 8));
687 #else
688 	ew32(GENCTL, 0x4412 | (RX_FIFO_THRESH << 8));
689 	er32(GENCTL);
690 	ew32(GENCTL, 0x0412 | (RX_FIFO_THRESH << 8));
691 #endif
692 
693 	udelay(20); /* Looks like EPII needs that if you want reliable RX init. FIXME: pci posting bug? */
694 
695 	for (i = 0; i < 3; i++)
696 		ew32(LAN0 + i*4, le16_to_cpu(((__le16*)dev->dev_addr)[i]));
697 
698 	ep->tx_threshold = TX_FIFO_THRESH;
699 	ew32(TxThresh, ep->tx_threshold);
700 
701 	if (media2miictl[dev->if_port & 15]) {
702 		if (ep->mii_phy_cnt)
703 			mdio_write(dev, ep->phys[0], MII_BMCR, media2miictl[dev->if_port&15]);
704 		if (dev->if_port == 1) {
705 			if (debug > 1)
706 				netdev_info(dev, "Using the 10base2 transceiver, MII status %4.4x.\n",
707 					    mdio_read(dev, ep->phys[0], MII_BMSR));
708 		}
709 	} else {
710 		int mii_lpa = mdio_read(dev, ep->phys[0], MII_LPA);
711 		if (mii_lpa != 0xffff) {
712 			if ((mii_lpa & LPA_100FULL) || (mii_lpa & 0x01C0) == LPA_10FULL)
713 				ep->mii.full_duplex = 1;
714 			else if (! (mii_lpa & LPA_LPACK))
715 				mdio_write(dev, ep->phys[0], MII_BMCR, BMCR_ANENABLE|BMCR_ANRESTART);
716 			if (debug > 1)
717 				netdev_info(dev, "Setting %s-duplex based on MII xcvr %d register read of %4.4x.\n",
718 					    ep->mii.full_duplex ? "full"
719 								: "half",
720 					    ep->phys[0], mii_lpa);
721 		}
722 	}
723 
724 	ew32(TxCtrl, ep->mii.full_duplex ? 0x7f : 0x79);
725 	ew32(PRxCDAR, ep->rx_ring_dma);
726 	ew32(PTxCDAR, ep->tx_ring_dma);
727 
728 	/* Start the chip's Rx process. */
729 	set_rx_mode(dev);
730 	ew32(COMMAND, StartRx | RxQueued);
731 
732 	netif_start_queue(dev);
733 
734 	/* Enable interrupts by setting the interrupt mask. */
735 	ew32(INTMASK, RxError | RxHeader | EpicNapiEvent | CntFull |
736 	     ((ep->chip_flags & TYPE2_INTR) ? PCIBusErr175 : PCIBusErr170) |
737 	     TxUnderrun);
738 
739 	if (debug > 1) {
740 		netdev_dbg(dev, "epic_open() ioaddr %p IRQ %d status %4.4x %s-duplex.\n",
741 			   ioaddr, irq, er32(GENCTL),
742 			   ep->mii.full_duplex ? "full" : "half");
743 	}
744 
745 	/* Set the timer to switch to check for link beat and perhaps switch
746 	   to an alternate media type. */
747 	timer_setup(&ep->timer, epic_timer, 0);
748 	ep->timer.expires = jiffies + 3*HZ;
749 	add_timer(&ep->timer);
750 
751 	return rc;
752 }
753 
754 /* Reset the chip to recover from a PCI transaction error.
755    This may occur at interrupt time. */
756 static void epic_pause(struct net_device *dev)
757 {
758 	struct net_device_stats *stats = &dev->stats;
759 	struct epic_private *ep = netdev_priv(dev);
760 	void __iomem *ioaddr = ep->ioaddr;
761 
762 	netif_stop_queue (dev);
763 
764 	/* Disable interrupts by clearing the interrupt mask. */
765 	ew32(INTMASK, 0x00000000);
766 	/* Stop the chip's Tx and Rx DMA processes. */
767 	ew16(COMMAND, StopRx | StopTxDMA | StopRxDMA);
768 
769 	/* Update the error counts. */
770 	if (er16(COMMAND) != 0xffff) {
771 		stats->rx_missed_errors	+= er8(MPCNT);
772 		stats->rx_frame_errors	+= er8(ALICNT);
773 		stats->rx_crc_errors	+= er8(CRCCNT);
774 	}
775 
776 	/* Remove the packets on the Rx queue. */
777 	epic_rx(dev, RX_RING_SIZE);
778 }
779 
780 static void epic_restart(struct net_device *dev)
781 {
782 	struct epic_private *ep = netdev_priv(dev);
783 	void __iomem *ioaddr = ep->ioaddr;
784 	int i;
785 
786 	/* Soft reset the chip. */
787 	ew32(GENCTL, 0x4001);
788 
789 	netdev_dbg(dev, "Restarting the EPIC chip, Rx %d/%d Tx %d/%d.\n",
790 		   ep->cur_rx, ep->dirty_rx, ep->dirty_tx, ep->cur_tx);
791 	udelay(1);
792 
793 	/* This magic is documented in SMSC app note 7.15 */
794 	for (i = 16; i > 0; i--)
795 		ew32(TEST1, 0x0008);
796 
797 #ifdef __BIG_ENDIAN
798 	ew32(GENCTL, 0x0432 | (RX_FIFO_THRESH << 8));
799 #else
800 	ew32(GENCTL, 0x0412 | (RX_FIFO_THRESH << 8));
801 #endif
802 	ew32(MIICfg, dev->if_port == 1 ? 0x13 : 0x12);
803 	if (ep->chip_flags & MII_PWRDWN)
804 		ew32(NVCTL, (er32(NVCTL) & ~0x003c) | 0x4800);
805 
806 	for (i = 0; i < 3; i++)
807 		ew32(LAN0 + i*4, le16_to_cpu(((__le16*)dev->dev_addr)[i]));
808 
809 	ep->tx_threshold = TX_FIFO_THRESH;
810 	ew32(TxThresh, ep->tx_threshold);
811 	ew32(TxCtrl, ep->mii.full_duplex ? 0x7f : 0x79);
812 	ew32(PRxCDAR, ep->rx_ring_dma +
813 	     (ep->cur_rx % RX_RING_SIZE) * sizeof(struct epic_rx_desc));
814 	ew32(PTxCDAR, ep->tx_ring_dma +
815 	     (ep->dirty_tx % TX_RING_SIZE) * sizeof(struct epic_tx_desc));
816 
817 	/* Start the chip's Rx process. */
818 	set_rx_mode(dev);
819 	ew32(COMMAND, StartRx | RxQueued);
820 
821 	/* Enable interrupts by setting the interrupt mask. */
822 	ew32(INTMASK, RxError | RxHeader | EpicNapiEvent | CntFull |
823 	     ((ep->chip_flags & TYPE2_INTR) ? PCIBusErr175 : PCIBusErr170) |
824 	     TxUnderrun);
825 
826 	netdev_dbg(dev, "epic_restart() done, cmd status %4.4x, ctl %4.4x interrupt %4.4x.\n",
827 		   er32(COMMAND), er32(GENCTL), er32(INTSTAT));
828 }
829 
830 static void check_media(struct net_device *dev)
831 {
832 	struct epic_private *ep = netdev_priv(dev);
833 	void __iomem *ioaddr = ep->ioaddr;
834 	int mii_lpa = ep->mii_phy_cnt ? mdio_read(dev, ep->phys[0], MII_LPA) : 0;
835 	int negotiated = mii_lpa & ep->mii.advertising;
836 	int duplex = (negotiated & 0x0100) || (negotiated & 0x01C0) == 0x0040;
837 
838 	if (ep->mii.force_media)
839 		return;
840 	if (mii_lpa == 0xffff)		/* Bogus read */
841 		return;
842 	if (ep->mii.full_duplex != duplex) {
843 		ep->mii.full_duplex = duplex;
844 		netdev_info(dev, "Setting %s-duplex based on MII #%d link partner capability of %4.4x.\n",
845 			    ep->mii.full_duplex ? "full" : "half",
846 			    ep->phys[0], mii_lpa);
847 		ew32(TxCtrl, ep->mii.full_duplex ? 0x7F : 0x79);
848 	}
849 }
850 
851 static void epic_timer(struct timer_list *t)
852 {
853 	struct epic_private *ep = from_timer(ep, t, timer);
854 	struct net_device *dev = ep->mii.dev;
855 	void __iomem *ioaddr = ep->ioaddr;
856 	int next_tick = 5*HZ;
857 
858 	if (debug > 3) {
859 		netdev_dbg(dev, "Media monitor tick, Tx status %8.8x.\n",
860 			   er32(TxSTAT));
861 		netdev_dbg(dev, "Other registers are IntMask %4.4x IntStatus %4.4x RxStatus %4.4x.\n",
862 			   er32(INTMASK), er32(INTSTAT), er32(RxSTAT));
863 	}
864 
865 	check_media(dev);
866 
867 	ep->timer.expires = jiffies + next_tick;
868 	add_timer(&ep->timer);
869 }
870 
871 static void epic_tx_timeout(struct net_device *dev, unsigned int txqueue)
872 {
873 	struct epic_private *ep = netdev_priv(dev);
874 	void __iomem *ioaddr = ep->ioaddr;
875 
876 	if (debug > 0) {
877 		netdev_warn(dev, "Transmit timeout using MII device, Tx status %4.4x.\n",
878 			    er16(TxSTAT));
879 		if (debug > 1) {
880 			netdev_dbg(dev, "Tx indices: dirty_tx %d, cur_tx %d.\n",
881 				   ep->dirty_tx, ep->cur_tx);
882 		}
883 	}
884 	if (er16(TxSTAT) & 0x10) {		/* Tx FIFO underflow. */
885 		dev->stats.tx_fifo_errors++;
886 		ew32(COMMAND, RestartTx);
887 	} else {
888 		epic_restart(dev);
889 		ew32(COMMAND, TxQueued);
890 	}
891 
892 	netif_trans_update(dev); /* prevent tx timeout */
893 	dev->stats.tx_errors++;
894 	if (!ep->tx_full)
895 		netif_wake_queue(dev);
896 }
897 
898 /* Initialize the Rx and Tx rings, along with various 'dev' bits. */
899 static void epic_init_ring(struct net_device *dev)
900 {
901 	struct epic_private *ep = netdev_priv(dev);
902 	int i;
903 
904 	ep->tx_full = 0;
905 	ep->dirty_tx = ep->cur_tx = 0;
906 	ep->cur_rx = ep->dirty_rx = 0;
907 	ep->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32);
908 
909 	/* Initialize all Rx descriptors. */
910 	for (i = 0; i < RX_RING_SIZE; i++) {
911 		ep->rx_ring[i].rxstatus = 0;
912 		ep->rx_ring[i].buflength = ep->rx_buf_sz;
913 		ep->rx_ring[i].next = ep->rx_ring_dma +
914 				      (i+1)*sizeof(struct epic_rx_desc);
915 		ep->rx_skbuff[i] = NULL;
916 	}
917 	/* Mark the last entry as wrapping the ring. */
918 	ep->rx_ring[i-1].next = ep->rx_ring_dma;
919 
920 	/* Fill in the Rx buffers.  Handle allocation failure gracefully. */
921 	for (i = 0; i < RX_RING_SIZE; i++) {
922 		struct sk_buff *skb = netdev_alloc_skb(dev, ep->rx_buf_sz + 2);
923 		ep->rx_skbuff[i] = skb;
924 		if (skb == NULL)
925 			break;
926 		skb_reserve(skb, 2);	/* 16 byte align the IP header. */
927 		ep->rx_ring[i].bufaddr = dma_map_single(&ep->pci_dev->dev,
928 							skb->data,
929 							ep->rx_buf_sz,
930 							DMA_FROM_DEVICE);
931 		ep->rx_ring[i].rxstatus = DescOwn;
932 	}
933 	ep->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
934 
935 	/* The Tx buffer descriptor is filled in as needed, but we
936 	   do need to clear the ownership bit. */
937 	for (i = 0; i < TX_RING_SIZE; i++) {
938 		ep->tx_skbuff[i] = NULL;
939 		ep->tx_ring[i].txstatus = 0x0000;
940 		ep->tx_ring[i].next = ep->tx_ring_dma +
941 			(i+1)*sizeof(struct epic_tx_desc);
942 	}
943 	ep->tx_ring[i-1].next = ep->tx_ring_dma;
944 }
945 
946 static netdev_tx_t epic_start_xmit(struct sk_buff *skb, struct net_device *dev)
947 {
948 	struct epic_private *ep = netdev_priv(dev);
949 	void __iomem *ioaddr = ep->ioaddr;
950 	int entry, free_count;
951 	u32 ctrl_word;
952 	unsigned long flags;
953 
954 	if (skb_padto(skb, ETH_ZLEN))
955 		return NETDEV_TX_OK;
956 
957 	/* Caution: the write order is important here, set the field with the
958 	   "ownership" bit last. */
959 
960 	/* Calculate the next Tx descriptor entry. */
961 	spin_lock_irqsave(&ep->lock, flags);
962 	free_count = ep->cur_tx - ep->dirty_tx;
963 	entry = ep->cur_tx % TX_RING_SIZE;
964 
965 	ep->tx_skbuff[entry] = skb;
966 	ep->tx_ring[entry].bufaddr = dma_map_single(&ep->pci_dev->dev,
967 						    skb->data, skb->len,
968 						    DMA_TO_DEVICE);
969 	if (free_count < TX_QUEUE_LEN/2) {/* Typical path */
970 		ctrl_word = 0x100000; /* No interrupt */
971 	} else if (free_count == TX_QUEUE_LEN/2) {
972 		ctrl_word = 0x140000; /* Tx-done intr. */
973 	} else if (free_count < TX_QUEUE_LEN - 1) {
974 		ctrl_word = 0x100000; /* No Tx-done intr. */
975 	} else {
976 		/* Leave room for an additional entry. */
977 		ctrl_word = 0x140000; /* Tx-done intr. */
978 		ep->tx_full = 1;
979 	}
980 	ep->tx_ring[entry].buflength = ctrl_word | skb->len;
981 	ep->tx_ring[entry].txstatus =
982 		((skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN) << 16)
983 			    | DescOwn;
984 
985 	ep->cur_tx++;
986 	if (ep->tx_full)
987 		netif_stop_queue(dev);
988 
989 	spin_unlock_irqrestore(&ep->lock, flags);
990 	/* Trigger an immediate transmit demand. */
991 	ew32(COMMAND, TxQueued);
992 
993 	if (debug > 4)
994 		netdev_dbg(dev, "Queued Tx packet size %d to slot %d, flag %2.2x Tx status %8.8x.\n",
995 			   skb->len, entry, ctrl_word, er32(TxSTAT));
996 
997 	return NETDEV_TX_OK;
998 }
999 
1000 static void epic_tx_error(struct net_device *dev, struct epic_private *ep,
1001 			  int status)
1002 {
1003 	struct net_device_stats *stats = &dev->stats;
1004 
1005 #ifndef final_version
1006 	/* There was an major error, log it. */
1007 	if (debug > 1)
1008 		netdev_dbg(dev, "Transmit error, Tx status %8.8x.\n",
1009 			   status);
1010 #endif
1011 	stats->tx_errors++;
1012 	if (status & 0x1050)
1013 		stats->tx_aborted_errors++;
1014 	if (status & 0x0008)
1015 		stats->tx_carrier_errors++;
1016 	if (status & 0x0040)
1017 		stats->tx_window_errors++;
1018 	if (status & 0x0010)
1019 		stats->tx_fifo_errors++;
1020 }
1021 
1022 static void epic_tx(struct net_device *dev, struct epic_private *ep)
1023 {
1024 	unsigned int dirty_tx, cur_tx;
1025 
1026 	/*
1027 	 * Note: if this lock becomes a problem we can narrow the locked
1028 	 * region at the cost of occasionally grabbing the lock more times.
1029 	 */
1030 	cur_tx = ep->cur_tx;
1031 	for (dirty_tx = ep->dirty_tx; cur_tx - dirty_tx > 0; dirty_tx++) {
1032 		struct sk_buff *skb;
1033 		int entry = dirty_tx % TX_RING_SIZE;
1034 		int txstatus = ep->tx_ring[entry].txstatus;
1035 
1036 		if (txstatus & DescOwn)
1037 			break;	/* It still hasn't been Txed */
1038 
1039 		if (likely(txstatus & 0x0001)) {
1040 			dev->stats.collisions += (txstatus >> 8) & 15;
1041 			dev->stats.tx_packets++;
1042 			dev->stats.tx_bytes += ep->tx_skbuff[entry]->len;
1043 		} else
1044 			epic_tx_error(dev, ep, txstatus);
1045 
1046 		/* Free the original skb. */
1047 		skb = ep->tx_skbuff[entry];
1048 		dma_unmap_single(&ep->pci_dev->dev,
1049 				 ep->tx_ring[entry].bufaddr, skb->len,
1050 				 DMA_TO_DEVICE);
1051 		dev_consume_skb_irq(skb);
1052 		ep->tx_skbuff[entry] = NULL;
1053 	}
1054 
1055 #ifndef final_version
1056 	if (cur_tx - dirty_tx > TX_RING_SIZE) {
1057 		netdev_warn(dev, "Out-of-sync dirty pointer, %d vs. %d, full=%d.\n",
1058 			    dirty_tx, cur_tx, ep->tx_full);
1059 		dirty_tx += TX_RING_SIZE;
1060 	}
1061 #endif
1062 	ep->dirty_tx = dirty_tx;
1063 	if (ep->tx_full && cur_tx - dirty_tx < TX_QUEUE_LEN - 4) {
1064 		/* The ring is no longer full, allow new TX entries. */
1065 		ep->tx_full = 0;
1066 		netif_wake_queue(dev);
1067 	}
1068 }
1069 
1070 /* The interrupt handler does all of the Rx thread work and cleans up
1071    after the Tx thread. */
1072 static irqreturn_t epic_interrupt(int irq, void *dev_instance)
1073 {
1074 	struct net_device *dev = dev_instance;
1075 	struct epic_private *ep = netdev_priv(dev);
1076 	void __iomem *ioaddr = ep->ioaddr;
1077 	unsigned int handled = 0;
1078 	int status;
1079 
1080 	status = er32(INTSTAT);
1081 	/* Acknowledge all of the current interrupt sources ASAP. */
1082 	ew32(INTSTAT, status & EpicNormalEvent);
1083 
1084 	if (debug > 4) {
1085 		netdev_dbg(dev, "Interrupt, status=%#8.8x new intstat=%#8.8x.\n",
1086 			   status, er32(INTSTAT));
1087 	}
1088 
1089 	if ((status & IntrSummary) == 0)
1090 		goto out;
1091 
1092 	handled = 1;
1093 
1094 	if (status & EpicNapiEvent) {
1095 		spin_lock(&ep->napi_lock);
1096 		if (napi_schedule_prep(&ep->napi)) {
1097 			epic_napi_irq_off(dev, ep);
1098 			__napi_schedule(&ep->napi);
1099 		}
1100 		spin_unlock(&ep->napi_lock);
1101 	}
1102 	status &= ~EpicNapiEvent;
1103 
1104 	/* Check uncommon events all at once. */
1105 	if (status & (CntFull | TxUnderrun | PCIBusErr170 | PCIBusErr175)) {
1106 		struct net_device_stats *stats = &dev->stats;
1107 
1108 		if (status == EpicRemoved)
1109 			goto out;
1110 
1111 		/* Always update the error counts to avoid overhead later. */
1112 		stats->rx_missed_errors	+= er8(MPCNT);
1113 		stats->rx_frame_errors	+= er8(ALICNT);
1114 		stats->rx_crc_errors	+= er8(CRCCNT);
1115 
1116 		if (status & TxUnderrun) { /* Tx FIFO underflow. */
1117 			stats->tx_fifo_errors++;
1118 			ew32(TxThresh, ep->tx_threshold += 128);
1119 			/* Restart the transmit process. */
1120 			ew32(COMMAND, RestartTx);
1121 		}
1122 		if (status & PCIBusErr170) {
1123 			netdev_err(dev, "PCI Bus Error! status %4.4x.\n",
1124 				   status);
1125 			epic_pause(dev);
1126 			epic_restart(dev);
1127 		}
1128 		/* Clear all error sources. */
1129 		ew32(INTSTAT, status & 0x7f18);
1130 	}
1131 
1132 out:
1133 	if (debug > 3) {
1134 		netdev_dbg(dev, "exit interrupt, intr_status=%#4.4x.\n",
1135 			   status);
1136 	}
1137 
1138 	return IRQ_RETVAL(handled);
1139 }
1140 
1141 static int epic_rx(struct net_device *dev, int budget)
1142 {
1143 	struct epic_private *ep = netdev_priv(dev);
1144 	int entry = ep->cur_rx % RX_RING_SIZE;
1145 	int rx_work_limit = ep->dirty_rx + RX_RING_SIZE - ep->cur_rx;
1146 	int work_done = 0;
1147 
1148 	if (debug > 4)
1149 		netdev_dbg(dev, " In epic_rx(), entry %d %8.8x.\n", entry,
1150 			   ep->rx_ring[entry].rxstatus);
1151 
1152 	if (rx_work_limit > budget)
1153 		rx_work_limit = budget;
1154 
1155 	/* If we own the next entry, it's a new packet. Send it up. */
1156 	while ((ep->rx_ring[entry].rxstatus & DescOwn) == 0) {
1157 		int status = ep->rx_ring[entry].rxstatus;
1158 
1159 		if (debug > 4)
1160 			netdev_dbg(dev, "  epic_rx() status was %8.8x.\n",
1161 				   status);
1162 		if (--rx_work_limit < 0)
1163 			break;
1164 		if (status & 0x2006) {
1165 			if (debug > 2)
1166 				netdev_dbg(dev, "epic_rx() error status was %8.8x.\n",
1167 					   status);
1168 			if (status & 0x2000) {
1169 				netdev_warn(dev, "Oversized Ethernet frame spanned multiple buffers, status %4.4x!\n",
1170 					    status);
1171 				dev->stats.rx_length_errors++;
1172 			} else if (status & 0x0006)
1173 				/* Rx Frame errors are counted in hardware. */
1174 				dev->stats.rx_errors++;
1175 		} else {
1176 			/* Malloc up new buffer, compatible with net-2e. */
1177 			/* Omit the four octet CRC from the length. */
1178 			short pkt_len = (status >> 16) - 4;
1179 			struct sk_buff *skb;
1180 
1181 			if (pkt_len > PKT_BUF_SZ - 4) {
1182 				netdev_err(dev, "Oversized Ethernet frame, status %x %d bytes.\n",
1183 					   status, pkt_len);
1184 				pkt_len = 1514;
1185 			}
1186 			/* Check if the packet is long enough to accept without copying
1187 			   to a minimally-sized skbuff. */
1188 			if (pkt_len < rx_copybreak &&
1189 			    (skb = netdev_alloc_skb(dev, pkt_len + 2)) != NULL) {
1190 				skb_reserve(skb, 2);	/* 16 byte align the IP header */
1191 				dma_sync_single_for_cpu(&ep->pci_dev->dev,
1192 							ep->rx_ring[entry].bufaddr,
1193 							ep->rx_buf_sz,
1194 							DMA_FROM_DEVICE);
1195 				skb_copy_to_linear_data(skb, ep->rx_skbuff[entry]->data, pkt_len);
1196 				skb_put(skb, pkt_len);
1197 				dma_sync_single_for_device(&ep->pci_dev->dev,
1198 							   ep->rx_ring[entry].bufaddr,
1199 							   ep->rx_buf_sz,
1200 							   DMA_FROM_DEVICE);
1201 			} else {
1202 				dma_unmap_single(&ep->pci_dev->dev,
1203 						 ep->rx_ring[entry].bufaddr,
1204 						 ep->rx_buf_sz,
1205 						 DMA_FROM_DEVICE);
1206 				skb_put(skb = ep->rx_skbuff[entry], pkt_len);
1207 				ep->rx_skbuff[entry] = NULL;
1208 			}
1209 			skb->protocol = eth_type_trans(skb, dev);
1210 			netif_receive_skb(skb);
1211 			dev->stats.rx_packets++;
1212 			dev->stats.rx_bytes += pkt_len;
1213 		}
1214 		work_done++;
1215 		entry = (++ep->cur_rx) % RX_RING_SIZE;
1216 	}
1217 
1218 	/* Refill the Rx ring buffers. */
1219 	for (; ep->cur_rx - ep->dirty_rx > 0; ep->dirty_rx++) {
1220 		entry = ep->dirty_rx % RX_RING_SIZE;
1221 		if (ep->rx_skbuff[entry] == NULL) {
1222 			struct sk_buff *skb;
1223 			skb = ep->rx_skbuff[entry] = netdev_alloc_skb(dev, ep->rx_buf_sz + 2);
1224 			if (skb == NULL)
1225 				break;
1226 			skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
1227 			ep->rx_ring[entry].bufaddr = dma_map_single(&ep->pci_dev->dev,
1228 								    skb->data,
1229 								    ep->rx_buf_sz,
1230 								    DMA_FROM_DEVICE);
1231 			work_done++;
1232 		}
1233 		/* AV: shouldn't we add a barrier here? */
1234 		ep->rx_ring[entry].rxstatus = DescOwn;
1235 	}
1236 	return work_done;
1237 }
1238 
1239 static void epic_rx_err(struct net_device *dev, struct epic_private *ep)
1240 {
1241 	void __iomem *ioaddr = ep->ioaddr;
1242 	int status;
1243 
1244 	status = er32(INTSTAT);
1245 
1246 	if (status == EpicRemoved)
1247 		return;
1248 	if (status & RxOverflow) 	/* Missed a Rx frame. */
1249 		dev->stats.rx_errors++;
1250 	if (status & (RxOverflow | RxFull))
1251 		ew16(COMMAND, RxQueued);
1252 }
1253 
1254 static int epic_poll(struct napi_struct *napi, int budget)
1255 {
1256 	struct epic_private *ep = container_of(napi, struct epic_private, napi);
1257 	struct net_device *dev = ep->mii.dev;
1258 	void __iomem *ioaddr = ep->ioaddr;
1259 	int work_done;
1260 
1261 	epic_tx(dev, ep);
1262 
1263 	work_done = epic_rx(dev, budget);
1264 
1265 	epic_rx_err(dev, ep);
1266 
1267 	if (work_done < budget && napi_complete_done(napi, work_done)) {
1268 		unsigned long flags;
1269 
1270 		spin_lock_irqsave(&ep->napi_lock, flags);
1271 
1272 		ew32(INTSTAT, EpicNapiEvent);
1273 		epic_napi_irq_on(dev, ep);
1274 		spin_unlock_irqrestore(&ep->napi_lock, flags);
1275 	}
1276 
1277 	return work_done;
1278 }
1279 
1280 static int epic_close(struct net_device *dev)
1281 {
1282 	struct epic_private *ep = netdev_priv(dev);
1283 	struct pci_dev *pdev = ep->pci_dev;
1284 	void __iomem *ioaddr = ep->ioaddr;
1285 	struct sk_buff *skb;
1286 	int i;
1287 
1288 	netif_stop_queue(dev);
1289 	napi_disable(&ep->napi);
1290 
1291 	if (debug > 1)
1292 		netdev_dbg(dev, "Shutting down ethercard, status was %2.2x.\n",
1293 			   er32(INTSTAT));
1294 
1295 	del_timer_sync(&ep->timer);
1296 
1297 	epic_disable_int(dev, ep);
1298 
1299 	free_irq(pdev->irq, dev);
1300 
1301 	epic_pause(dev);
1302 
1303 	/* Free all the skbuffs in the Rx queue. */
1304 	for (i = 0; i < RX_RING_SIZE; i++) {
1305 		skb = ep->rx_skbuff[i];
1306 		ep->rx_skbuff[i] = NULL;
1307 		ep->rx_ring[i].rxstatus = 0;		/* Not owned by Epic chip. */
1308 		ep->rx_ring[i].buflength = 0;
1309 		if (skb) {
1310 			dma_unmap_single(&pdev->dev, ep->rx_ring[i].bufaddr,
1311 					 ep->rx_buf_sz, DMA_FROM_DEVICE);
1312 			dev_kfree_skb(skb);
1313 		}
1314 		ep->rx_ring[i].bufaddr = 0xBADF00D0; /* An invalid address. */
1315 	}
1316 	for (i = 0; i < TX_RING_SIZE; i++) {
1317 		skb = ep->tx_skbuff[i];
1318 		ep->tx_skbuff[i] = NULL;
1319 		if (!skb)
1320 			continue;
1321 		dma_unmap_single(&pdev->dev, ep->tx_ring[i].bufaddr, skb->len,
1322 				 DMA_TO_DEVICE);
1323 		dev_kfree_skb(skb);
1324 	}
1325 
1326 	/* Green! Leave the chip in low-power mode. */
1327 	ew32(GENCTL, 0x0008);
1328 
1329 	return 0;
1330 }
1331 
1332 static struct net_device_stats *epic_get_stats(struct net_device *dev)
1333 {
1334 	struct epic_private *ep = netdev_priv(dev);
1335 	void __iomem *ioaddr = ep->ioaddr;
1336 
1337 	if (netif_running(dev)) {
1338 		struct net_device_stats *stats = &dev->stats;
1339 
1340 		stats->rx_missed_errors	+= er8(MPCNT);
1341 		stats->rx_frame_errors	+= er8(ALICNT);
1342 		stats->rx_crc_errors	+= er8(CRCCNT);
1343 	}
1344 
1345 	return &dev->stats;
1346 }
1347 
1348 /* Set or clear the multicast filter for this adaptor.
1349    Note that we only use exclusion around actually queueing the
1350    new frame, not around filling ep->setup_frame.  This is non-deterministic
1351    when re-entered but still correct. */
1352 
1353 static void set_rx_mode(struct net_device *dev)
1354 {
1355 	struct epic_private *ep = netdev_priv(dev);
1356 	void __iomem *ioaddr = ep->ioaddr;
1357 	unsigned char mc_filter[8];		 /* Multicast hash filter */
1358 	int i;
1359 
1360 	if (dev->flags & IFF_PROMISC) {			/* Set promiscuous. */
1361 		ew32(RxCtrl, 0x002c);
1362 		/* Unconditionally log net taps. */
1363 		memset(mc_filter, 0xff, sizeof(mc_filter));
1364 	} else if ((!netdev_mc_empty(dev)) || (dev->flags & IFF_ALLMULTI)) {
1365 		/* There is apparently a chip bug, so the multicast filter
1366 		   is never enabled. */
1367 		/* Too many to filter perfectly -- accept all multicasts. */
1368 		memset(mc_filter, 0xff, sizeof(mc_filter));
1369 		ew32(RxCtrl, 0x000c);
1370 	} else if (netdev_mc_empty(dev)) {
1371 		ew32(RxCtrl, 0x0004);
1372 		return;
1373 	} else {					/* Never executed, for now. */
1374 		struct netdev_hw_addr *ha;
1375 
1376 		memset(mc_filter, 0, sizeof(mc_filter));
1377 		netdev_for_each_mc_addr(ha, dev) {
1378 			unsigned int bit_nr =
1379 				ether_crc_le(ETH_ALEN, ha->addr) & 0x3f;
1380 			mc_filter[bit_nr >> 3] |= (1 << bit_nr);
1381 		}
1382 	}
1383 	/* ToDo: perhaps we need to stop the Tx and Rx process here? */
1384 	if (memcmp(mc_filter, ep->mc_filter, sizeof(mc_filter))) {
1385 		for (i = 0; i < 4; i++)
1386 			ew16(MC0 + i*4, ((u16 *)mc_filter)[i]);
1387 		memcpy(ep->mc_filter, mc_filter, sizeof(mc_filter));
1388 	}
1389 }
1390 
1391 static void netdev_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *info)
1392 {
1393 	struct epic_private *np = netdev_priv(dev);
1394 
1395 	strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
1396 	strlcpy(info->version, DRV_VERSION, sizeof(info->version));
1397 	strlcpy(info->bus_info, pci_name(np->pci_dev), sizeof(info->bus_info));
1398 }
1399 
1400 static int netdev_get_link_ksettings(struct net_device *dev,
1401 				     struct ethtool_link_ksettings *cmd)
1402 {
1403 	struct epic_private *np = netdev_priv(dev);
1404 
1405 	spin_lock_irq(&np->lock);
1406 	mii_ethtool_get_link_ksettings(&np->mii, cmd);
1407 	spin_unlock_irq(&np->lock);
1408 
1409 	return 0;
1410 }
1411 
1412 static int netdev_set_link_ksettings(struct net_device *dev,
1413 				     const struct ethtool_link_ksettings *cmd)
1414 {
1415 	struct epic_private *np = netdev_priv(dev);
1416 	int rc;
1417 
1418 	spin_lock_irq(&np->lock);
1419 	rc = mii_ethtool_set_link_ksettings(&np->mii, cmd);
1420 	spin_unlock_irq(&np->lock);
1421 
1422 	return rc;
1423 }
1424 
1425 static int netdev_nway_reset(struct net_device *dev)
1426 {
1427 	struct epic_private *np = netdev_priv(dev);
1428 	return mii_nway_restart(&np->mii);
1429 }
1430 
1431 static u32 netdev_get_link(struct net_device *dev)
1432 {
1433 	struct epic_private *np = netdev_priv(dev);
1434 	return mii_link_ok(&np->mii);
1435 }
1436 
1437 static u32 netdev_get_msglevel(struct net_device *dev)
1438 {
1439 	return debug;
1440 }
1441 
1442 static void netdev_set_msglevel(struct net_device *dev, u32 value)
1443 {
1444 	debug = value;
1445 }
1446 
1447 static int ethtool_begin(struct net_device *dev)
1448 {
1449 	struct epic_private *ep = netdev_priv(dev);
1450 	void __iomem *ioaddr = ep->ioaddr;
1451 
1452 	if (ep->ethtool_ops_nesting == U32_MAX)
1453 		return -EBUSY;
1454 	/* power-up, if interface is down */
1455 	if (!ep->ethtool_ops_nesting++ && !netif_running(dev)) {
1456 		ew32(GENCTL, 0x0200);
1457 		ew32(NVCTL, (er32(NVCTL) & ~0x003c) | 0x4800);
1458 	}
1459 	return 0;
1460 }
1461 
1462 static void ethtool_complete(struct net_device *dev)
1463 {
1464 	struct epic_private *ep = netdev_priv(dev);
1465 	void __iomem *ioaddr = ep->ioaddr;
1466 
1467 	/* power-down, if interface is down */
1468 	if (!--ep->ethtool_ops_nesting && !netif_running(dev)) {
1469 		ew32(GENCTL, 0x0008);
1470 		ew32(NVCTL, (er32(NVCTL) & ~0x483c) | 0x0000);
1471 	}
1472 }
1473 
1474 static const struct ethtool_ops netdev_ethtool_ops = {
1475 	.get_drvinfo		= netdev_get_drvinfo,
1476 	.nway_reset		= netdev_nway_reset,
1477 	.get_link		= netdev_get_link,
1478 	.get_msglevel		= netdev_get_msglevel,
1479 	.set_msglevel		= netdev_set_msglevel,
1480 	.begin			= ethtool_begin,
1481 	.complete		= ethtool_complete,
1482 	.get_link_ksettings	= netdev_get_link_ksettings,
1483 	.set_link_ksettings	= netdev_set_link_ksettings,
1484 };
1485 
1486 static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
1487 {
1488 	struct epic_private *np = netdev_priv(dev);
1489 	void __iomem *ioaddr = np->ioaddr;
1490 	struct mii_ioctl_data *data = if_mii(rq);
1491 	int rc;
1492 
1493 	/* power-up, if interface is down */
1494 	if (! netif_running(dev)) {
1495 		ew32(GENCTL, 0x0200);
1496 		ew32(NVCTL, (er32(NVCTL) & ~0x003c) | 0x4800);
1497 	}
1498 
1499 	/* all non-ethtool ioctls (the SIOC[GS]MIIxxx ioctls) */
1500 	spin_lock_irq(&np->lock);
1501 	rc = generic_mii_ioctl(&np->mii, data, cmd, NULL);
1502 	spin_unlock_irq(&np->lock);
1503 
1504 	/* power-down, if interface is down */
1505 	if (! netif_running(dev)) {
1506 		ew32(GENCTL, 0x0008);
1507 		ew32(NVCTL, (er32(NVCTL) & ~0x483c) | 0x0000);
1508 	}
1509 	return rc;
1510 }
1511 
1512 
1513 static void epic_remove_one(struct pci_dev *pdev)
1514 {
1515 	struct net_device *dev = pci_get_drvdata(pdev);
1516 	struct epic_private *ep = netdev_priv(dev);
1517 
1518 	unregister_netdev(dev);
1519 	dma_free_coherent(&pdev->dev, TX_TOTAL_SIZE, ep->tx_ring,
1520 			  ep->tx_ring_dma);
1521 	dma_free_coherent(&pdev->dev, RX_TOTAL_SIZE, ep->rx_ring,
1522 			  ep->rx_ring_dma);
1523 	pci_iounmap(pdev, ep->ioaddr);
1524 	free_netdev(dev);
1525 	pci_release_regions(pdev);
1526 	pci_disable_device(pdev);
1527 	/* pci_power_off(pdev, -1); */
1528 }
1529 
1530 static int __maybe_unused epic_suspend(struct device *dev_d)
1531 {
1532 	struct net_device *dev = dev_get_drvdata(dev_d);
1533 	struct epic_private *ep = netdev_priv(dev);
1534 	void __iomem *ioaddr = ep->ioaddr;
1535 
1536 	if (!netif_running(dev))
1537 		return 0;
1538 	epic_pause(dev);
1539 	/* Put the chip into low-power mode. */
1540 	ew32(GENCTL, 0x0008);
1541 	/* pci_power_off(pdev, -1); */
1542 	return 0;
1543 }
1544 
1545 
1546 static int __maybe_unused epic_resume(struct device *dev_d)
1547 {
1548 	struct net_device *dev = dev_get_drvdata(dev_d);
1549 
1550 	if (!netif_running(dev))
1551 		return 0;
1552 	epic_restart(dev);
1553 	/* pci_power_on(pdev); */
1554 	return 0;
1555 }
1556 
1557 static SIMPLE_DEV_PM_OPS(epic_pm_ops, epic_suspend, epic_resume);
1558 
1559 static struct pci_driver epic_driver = {
1560 	.name		= DRV_NAME,
1561 	.id_table	= epic_pci_tbl,
1562 	.probe		= epic_init_one,
1563 	.remove		= epic_remove_one,
1564 	.driver.pm	= &epic_pm_ops,
1565 };
1566 
1567 
1568 static int __init epic_init (void)
1569 {
1570 /* when a module, this is printed whether or not devices are found in probe */
1571 #ifdef MODULE
1572 	pr_info("%s%s\n", version, version2);
1573 #endif
1574 
1575 	return pci_register_driver(&epic_driver);
1576 }
1577 
1578 
1579 static void __exit epic_cleanup (void)
1580 {
1581 	pci_unregister_driver (&epic_driver);
1582 }
1583 
1584 
1585 module_init(epic_init);
1586 module_exit(epic_cleanup);
1587