1 /* 2 * linux/drivers/acorn/net/ether3.c 3 * 4 * Copyright (C) 1995-2000 Russell King 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License version 2 as 8 * published by the Free Software Foundation. 9 * 10 * SEEQ nq8005 ethernet driver for Acorn/ANT Ether3 card 11 * for Acorn machines 12 * 13 * By Russell King, with some suggestions from borris@ant.co.uk 14 * 15 * Changelog: 16 * 1.04 RMK 29/02/1996 Won't pass packets that are from our ethernet 17 * address up to the higher levels - they're 18 * silently ignored. I/F can now be put into 19 * multicast mode. Receiver routine optimised. 20 * 1.05 RMK 30/02/1996 Now claims interrupt at open when part of 21 * the kernel rather than when a module. 22 * 1.06 RMK 02/03/1996 Various code cleanups 23 * 1.07 RMK 13/10/1996 Optimised interrupt routine and transmit 24 * routines. 25 * 1.08 RMK 14/10/1996 Fixed problem with too many packets, 26 * prevented the kernel message about dropped 27 * packets appearing too many times a second. 28 * Now does not disable all IRQs, only the IRQ 29 * used by this card. 30 * 1.09 RMK 10/11/1996 Only enables TX irq when buffer space is low, 31 * but we still service the TX queue if we get a 32 * RX interrupt. 33 * 1.10 RMK 15/07/1997 Fixed autoprobing of NQ8004. 34 * 1.11 RMK 16/11/1997 Fixed autoprobing of NQ8005A. 35 * 1.12 RMK 31/12/1997 Removed reference to dev_tint for Linux 2.1. 36 * RMK 27/06/1998 Changed asm/delay.h to linux/delay.h. 37 * 1.13 RMK 29/06/1998 Fixed problem with transmission of packets. 38 * Chip seems to have a bug in, whereby if the 39 * packet starts two bytes from the end of the 40 * buffer, it corrupts the receiver chain, and 41 * never updates the transmit status correctly. 42 * 1.14 RMK 07/01/1998 Added initial code for ETHERB addressing. 43 * 1.15 RMK 30/04/1999 More fixes to the transmit routine for buggy 44 * hardware. 45 * 1.16 RMK 10/02/2000 Updated for 2.3.43 46 * 1.17 RMK 13/05/2000 Updated for 2.3.99-pre8 47 */ 48 49 #include <linux/module.h> 50 #include <linux/kernel.h> 51 #include <linux/types.h> 52 #include <linux/fcntl.h> 53 #include <linux/interrupt.h> 54 #include <linux/ioport.h> 55 #include <linux/in.h> 56 #include <linux/slab.h> 57 #include <linux/string.h> 58 #include <linux/errno.h> 59 #include <linux/netdevice.h> 60 #include <linux/etherdevice.h> 61 #include <linux/skbuff.h> 62 #include <linux/device.h> 63 #include <linux/init.h> 64 #include <linux/delay.h> 65 #include <linux/bitops.h> 66 67 #include <asm/ecard.h> 68 #include <asm/io.h> 69 70 static char version[] __devinitdata = "ether3 ethernet driver (c) 1995-2000 R.M.King v1.17\n"; 71 72 #include "ether3.h" 73 74 static unsigned int net_debug = NET_DEBUG; 75 76 static void ether3_setmulticastlist(struct net_device *dev); 77 static int ether3_rx(struct net_device *dev, unsigned int maxcnt); 78 static void ether3_tx(struct net_device *dev); 79 static int ether3_open (struct net_device *dev); 80 static int ether3_sendpacket (struct sk_buff *skb, struct net_device *dev); 81 static irqreturn_t ether3_interrupt (int irq, void *dev_id); 82 static int ether3_close (struct net_device *dev); 83 static void ether3_setmulticastlist (struct net_device *dev); 84 static void ether3_timeout(struct net_device *dev); 85 86 #define BUS_16 2 87 #define BUS_8 1 88 #define BUS_UNKNOWN 0 89 90 /* --------------------------------------------------------------------------- */ 91 92 typedef enum { 93 buffer_write, 94 buffer_read 95 } buffer_rw_t; 96 97 /* 98 * ether3 read/write. Slow things down a bit... 99 * The SEEQ8005 doesn't like us writing to its registers 100 * too quickly. 101 */ 102 static inline void ether3_outb(int v, const void __iomem *r) 103 { 104 writeb(v, r); 105 udelay(1); 106 } 107 108 static inline void ether3_outw(int v, const void __iomem *r) 109 { 110 writew(v, r); 111 udelay(1); 112 } 113 #define ether3_inb(r) ({ unsigned int __v = readb((r)); udelay(1); __v; }) 114 #define ether3_inw(r) ({ unsigned int __v = readw((r)); udelay(1); __v; }) 115 116 static int 117 ether3_setbuffer(struct net_device *dev, buffer_rw_t read, int start) 118 { 119 int timeout = 1000; 120 121 ether3_outw(priv(dev)->regs.config1 | CFG1_LOCBUFMEM, REG_CONFIG1); 122 ether3_outw(priv(dev)->regs.command | CMD_FIFOWRITE, REG_COMMAND); 123 124 while ((ether3_inw(REG_STATUS) & STAT_FIFOEMPTY) == 0) { 125 if (!timeout--) { 126 printk("%s: setbuffer broken\n", dev->name); 127 priv(dev)->broken = 1; 128 return 1; 129 } 130 udelay(1); 131 } 132 133 if (read == buffer_read) { 134 ether3_outw(start, REG_DMAADDR); 135 ether3_outw(priv(dev)->regs.command | CMD_FIFOREAD, REG_COMMAND); 136 } else { 137 ether3_outw(priv(dev)->regs.command | CMD_FIFOWRITE, REG_COMMAND); 138 ether3_outw(start, REG_DMAADDR); 139 } 140 return 0; 141 } 142 143 /* 144 * write data to the buffer memory 145 */ 146 #define ether3_writebuffer(dev,data,length) \ 147 writesw(REG_BUFWIN, (data), (length) >> 1) 148 149 #define ether3_writeword(dev,data) \ 150 writew((data), REG_BUFWIN) 151 152 #define ether3_writelong(dev,data) { \ 153 void __iomem *reg_bufwin = REG_BUFWIN; \ 154 writew((data), reg_bufwin); \ 155 writew((data) >> 16, reg_bufwin); \ 156 } 157 158 /* 159 * read data from the buffer memory 160 */ 161 #define ether3_readbuffer(dev,data,length) \ 162 readsw(REG_BUFWIN, (data), (length) >> 1) 163 164 #define ether3_readword(dev) \ 165 readw(REG_BUFWIN) 166 167 #define ether3_readlong(dev) \ 168 readw(REG_BUFWIN) | (readw(REG_BUFWIN) << 16) 169 170 /* 171 * Switch LED off... 172 */ 173 static void ether3_ledoff(unsigned long data) 174 { 175 struct net_device *dev = (struct net_device *)data; 176 ether3_outw(priv(dev)->regs.config2 |= CFG2_CTRLO, REG_CONFIG2); 177 } 178 179 /* 180 * switch LED on... 181 */ 182 static inline void ether3_ledon(struct net_device *dev) 183 { 184 del_timer(&priv(dev)->timer); 185 priv(dev)->timer.expires = jiffies + HZ / 50; /* leave on for 1/50th second */ 186 priv(dev)->timer.data = (unsigned long)dev; 187 priv(dev)->timer.function = ether3_ledoff; 188 add_timer(&priv(dev)->timer); 189 if (priv(dev)->regs.config2 & CFG2_CTRLO) 190 ether3_outw(priv(dev)->regs.config2 &= ~CFG2_CTRLO, REG_CONFIG2); 191 } 192 193 /* 194 * Read the ethernet address string from the on board rom. 195 * This is an ascii string!!! 196 */ 197 static int __devinit 198 ether3_addr(char *addr, struct expansion_card *ec) 199 { 200 struct in_chunk_dir cd; 201 char *s; 202 203 if (ecard_readchunk(&cd, ec, 0xf5, 0) && (s = strchr(cd.d.string, '('))) { 204 int i; 205 for (i = 0; i<6; i++) { 206 addr[i] = simple_strtoul(s + 1, &s, 0x10); 207 if (*s != (i==5?')' : ':' )) 208 break; 209 } 210 if (i == 6) 211 return 0; 212 } 213 /* I wonder if we should even let the user continue in this case 214 * - no, it would be better to disable the device 215 */ 216 printk(KERN_ERR "ether3: Couldn't read a valid MAC address from card.\n"); 217 return -ENODEV; 218 } 219 220 /* --------------------------------------------------------------------------- */ 221 222 static int __devinit 223 ether3_ramtest(struct net_device *dev, unsigned char byte) 224 { 225 unsigned char *buffer = kmalloc(RX_END, GFP_KERNEL); 226 int i,ret = 0; 227 int max_errors = 4; 228 int bad = -1; 229 230 if (!buffer) 231 return 1; 232 233 memset(buffer, byte, RX_END); 234 ether3_setbuffer(dev, buffer_write, 0); 235 ether3_writebuffer(dev, buffer, TX_END); 236 ether3_setbuffer(dev, buffer_write, RX_START); 237 ether3_writebuffer(dev, buffer + RX_START, RX_LEN); 238 memset(buffer, byte ^ 0xff, RX_END); 239 ether3_setbuffer(dev, buffer_read, 0); 240 ether3_readbuffer(dev, buffer, TX_END); 241 ether3_setbuffer(dev, buffer_read, RX_START); 242 ether3_readbuffer(dev, buffer + RX_START, RX_LEN); 243 244 for (i = 0; i < RX_END; i++) { 245 if (buffer[i] != byte) { 246 if (max_errors > 0 && bad != buffer[i]) { 247 printk("%s: RAM failed with (%02X instead of %02X) at 0x%04X", 248 dev->name, buffer[i], byte, i); 249 ret = 2; 250 max_errors--; 251 bad = i; 252 } 253 } else { 254 if (bad != -1) { 255 if (bad != i - 1) 256 printk(" - 0x%04X\n", i - 1); 257 printk("\n"); 258 bad = -1; 259 } 260 } 261 } 262 if (bad != -1) 263 printk(" - 0xffff\n"); 264 kfree(buffer); 265 266 return ret; 267 } 268 269 /* ------------------------------------------------------------------------------- */ 270 271 static int __devinit ether3_init_2(struct net_device *dev) 272 { 273 int i; 274 275 priv(dev)->regs.config1 = CFG1_RECVCOMPSTAT0|CFG1_DMABURST8; 276 priv(dev)->regs.config2 = CFG2_CTRLO|CFG2_RECVCRC|CFG2_ERRENCRC; 277 priv(dev)->regs.command = 0; 278 279 /* 280 * Set up our hardware address 281 */ 282 ether3_outw(priv(dev)->regs.config1 | CFG1_BUFSELSTAT0, REG_CONFIG1); 283 for (i = 0; i < 6; i++) 284 ether3_outb(dev->dev_addr[i], REG_BUFWIN); 285 286 if (dev->flags & IFF_PROMISC) 287 priv(dev)->regs.config1 |= CFG1_RECVPROMISC; 288 else if (dev->flags & IFF_MULTICAST) 289 priv(dev)->regs.config1 |= CFG1_RECVSPECBRMULTI; 290 else 291 priv(dev)->regs.config1 |= CFG1_RECVSPECBROAD; 292 293 /* 294 * There is a problem with the NQ8005 in that it occasionally loses the 295 * last two bytes. To get round this problem, we receive the CRC as 296 * well. That way, if we do lose the last two, then it doesn't matter. 297 */ 298 ether3_outw(priv(dev)->regs.config1 | CFG1_TRANSEND, REG_CONFIG1); 299 ether3_outw((TX_END>>8) - 1, REG_BUFWIN); 300 ether3_outw(priv(dev)->rx_head, REG_RECVPTR); 301 ether3_outw(0, REG_TRANSMITPTR); 302 ether3_outw(priv(dev)->rx_head >> 8, REG_RECVEND); 303 ether3_outw(priv(dev)->regs.config2, REG_CONFIG2); 304 ether3_outw(priv(dev)->regs.config1 | CFG1_LOCBUFMEM, REG_CONFIG1); 305 ether3_outw(priv(dev)->regs.command, REG_COMMAND); 306 307 i = ether3_ramtest(dev, 0x5A); 308 if(i) 309 return i; 310 i = ether3_ramtest(dev, 0x1E); 311 if(i) 312 return i; 313 314 ether3_setbuffer(dev, buffer_write, 0); 315 ether3_writelong(dev, 0); 316 return 0; 317 } 318 319 static void 320 ether3_init_for_open(struct net_device *dev) 321 { 322 int i; 323 324 /* Reset the chip */ 325 ether3_outw(CFG2_RESET, REG_CONFIG2); 326 udelay(4); 327 328 priv(dev)->regs.command = 0; 329 ether3_outw(CMD_RXOFF|CMD_TXOFF, REG_COMMAND); 330 while (ether3_inw(REG_STATUS) & (STAT_RXON|STAT_TXON)) 331 barrier(); 332 333 ether3_outw(priv(dev)->regs.config1 | CFG1_BUFSELSTAT0, REG_CONFIG1); 334 for (i = 0; i < 6; i++) 335 ether3_outb(dev->dev_addr[i], REG_BUFWIN); 336 337 priv(dev)->tx_head = 0; 338 priv(dev)->tx_tail = 0; 339 priv(dev)->regs.config2 |= CFG2_CTRLO; 340 priv(dev)->rx_head = RX_START; 341 342 ether3_outw(priv(dev)->regs.config1 | CFG1_TRANSEND, REG_CONFIG1); 343 ether3_outw((TX_END>>8) - 1, REG_BUFWIN); 344 ether3_outw(priv(dev)->rx_head, REG_RECVPTR); 345 ether3_outw(priv(dev)->rx_head >> 8, REG_RECVEND); 346 ether3_outw(0, REG_TRANSMITPTR); 347 ether3_outw(priv(dev)->regs.config2, REG_CONFIG2); 348 ether3_outw(priv(dev)->regs.config1 | CFG1_LOCBUFMEM, REG_CONFIG1); 349 350 ether3_setbuffer(dev, buffer_write, 0); 351 ether3_writelong(dev, 0); 352 353 priv(dev)->regs.command = CMD_ENINTRX | CMD_ENINTTX; 354 ether3_outw(priv(dev)->regs.command | CMD_RXON, REG_COMMAND); 355 } 356 357 static inline int 358 ether3_probe_bus_8(struct net_device *dev, int val) 359 { 360 int write_low, write_high, read_low, read_high; 361 362 write_low = val & 255; 363 write_high = val >> 8; 364 365 printk(KERN_DEBUG "ether3_probe: write8 [%02X:%02X]", write_high, write_low); 366 367 ether3_outb(write_low, REG_RECVPTR); 368 ether3_outb(write_high, REG_RECVPTR + 4); 369 370 read_low = ether3_inb(REG_RECVPTR); 371 read_high = ether3_inb(REG_RECVPTR + 4); 372 373 printk(", read8 [%02X:%02X]\n", read_high, read_low); 374 375 return read_low == write_low && read_high == write_high; 376 } 377 378 static inline int 379 ether3_probe_bus_16(struct net_device *dev, int val) 380 { 381 int read_val; 382 383 ether3_outw(val, REG_RECVPTR); 384 read_val = ether3_inw(REG_RECVPTR); 385 386 printk(KERN_DEBUG "ether3_probe: write16 [%04X], read16 [%04X]\n", val, read_val); 387 388 return read_val == val; 389 } 390 391 /* 392 * Open/initialize the board. This is called (in the current kernel) 393 * sometime after booting when the 'ifconfig' program is run. 394 * 395 * This routine should set everything up anew at each open, even 396 * registers that "should" only need to be set once at boot, so that 397 * there is non-reboot way to recover if something goes wrong. 398 */ 399 static int 400 ether3_open(struct net_device *dev) 401 { 402 if (!is_valid_ether_addr(dev->dev_addr)) { 403 printk(KERN_WARNING "%s: invalid ethernet MAC address\n", 404 dev->name); 405 return -EINVAL; 406 } 407 408 if (request_irq(dev->irq, ether3_interrupt, 0, "ether3", dev)) 409 return -EAGAIN; 410 411 ether3_init_for_open(dev); 412 413 netif_start_queue(dev); 414 415 return 0; 416 } 417 418 /* 419 * The inverse routine to ether3_open(). 420 */ 421 static int 422 ether3_close(struct net_device *dev) 423 { 424 netif_stop_queue(dev); 425 426 disable_irq(dev->irq); 427 428 ether3_outw(CMD_RXOFF|CMD_TXOFF, REG_COMMAND); 429 priv(dev)->regs.command = 0; 430 while (ether3_inw(REG_STATUS) & (STAT_RXON|STAT_TXON)) 431 barrier(); 432 ether3_outb(0x80, REG_CONFIG2 + 4); 433 ether3_outw(0, REG_COMMAND); 434 435 free_irq(dev->irq, dev); 436 437 return 0; 438 } 439 440 /* 441 * Set or clear promiscuous/multicast mode filter for this adaptor. 442 * 443 * We don't attempt any packet filtering. The card may have a SEEQ 8004 444 * in which does not have the other ethernet address registers present... 445 */ 446 static void ether3_setmulticastlist(struct net_device *dev) 447 { 448 priv(dev)->regs.config1 &= ~CFG1_RECVPROMISC; 449 450 if (dev->flags & IFF_PROMISC) { 451 /* promiscuous mode */ 452 priv(dev)->regs.config1 |= CFG1_RECVPROMISC; 453 } else if (dev->flags & IFF_ALLMULTI || !netdev_mc_empty(dev)) { 454 priv(dev)->regs.config1 |= CFG1_RECVSPECBRMULTI; 455 } else 456 priv(dev)->regs.config1 |= CFG1_RECVSPECBROAD; 457 458 ether3_outw(priv(dev)->regs.config1 | CFG1_LOCBUFMEM, REG_CONFIG1); 459 } 460 461 static void ether3_timeout(struct net_device *dev) 462 { 463 unsigned long flags; 464 465 del_timer(&priv(dev)->timer); 466 467 local_irq_save(flags); 468 printk(KERN_ERR "%s: transmit timed out, network cable problem?\n", dev->name); 469 printk(KERN_ERR "%s: state: { status=%04X cfg1=%04X cfg2=%04X }\n", dev->name, 470 ether3_inw(REG_STATUS), ether3_inw(REG_CONFIG1), ether3_inw(REG_CONFIG2)); 471 printk(KERN_ERR "%s: { rpr=%04X rea=%04X tpr=%04X }\n", dev->name, 472 ether3_inw(REG_RECVPTR), ether3_inw(REG_RECVEND), ether3_inw(REG_TRANSMITPTR)); 473 printk(KERN_ERR "%s: tx head=%X tx tail=%X\n", dev->name, 474 priv(dev)->tx_head, priv(dev)->tx_tail); 475 ether3_setbuffer(dev, buffer_read, priv(dev)->tx_tail); 476 printk(KERN_ERR "%s: packet status = %08X\n", dev->name, ether3_readlong(dev)); 477 local_irq_restore(flags); 478 479 priv(dev)->regs.config2 |= CFG2_CTRLO; 480 dev->stats.tx_errors += 1; 481 ether3_outw(priv(dev)->regs.config2, REG_CONFIG2); 482 priv(dev)->tx_head = priv(dev)->tx_tail = 0; 483 484 netif_wake_queue(dev); 485 } 486 487 /* 488 * Transmit a packet 489 */ 490 static int 491 ether3_sendpacket(struct sk_buff *skb, struct net_device *dev) 492 { 493 unsigned long flags; 494 unsigned int length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN; 495 unsigned int ptr, next_ptr; 496 497 if (priv(dev)->broken) { 498 dev_kfree_skb(skb); 499 dev->stats.tx_dropped++; 500 netif_start_queue(dev); 501 return NETDEV_TX_OK; 502 } 503 504 length = (length + 1) & ~1; 505 if (length != skb->len) { 506 if (skb_padto(skb, length)) 507 goto out; 508 } 509 510 next_ptr = (priv(dev)->tx_head + 1) & 15; 511 512 local_irq_save(flags); 513 514 if (priv(dev)->tx_tail == next_ptr) { 515 local_irq_restore(flags); 516 return NETDEV_TX_BUSY; /* unable to queue */ 517 } 518 519 ptr = 0x600 * priv(dev)->tx_head; 520 priv(dev)->tx_head = next_ptr; 521 next_ptr *= 0x600; 522 523 #define TXHDR_FLAGS (TXHDR_TRANSMIT|TXHDR_CHAINCONTINUE|TXHDR_DATAFOLLOWS|TXHDR_ENSUCCESS) 524 525 ether3_setbuffer(dev, buffer_write, next_ptr); 526 ether3_writelong(dev, 0); 527 ether3_setbuffer(dev, buffer_write, ptr); 528 ether3_writelong(dev, 0); 529 ether3_writebuffer(dev, skb->data, length); 530 ether3_writeword(dev, htons(next_ptr)); 531 ether3_writeword(dev, TXHDR_CHAINCONTINUE >> 16); 532 ether3_setbuffer(dev, buffer_write, ptr); 533 ether3_writeword(dev, htons((ptr + length + 4))); 534 ether3_writeword(dev, TXHDR_FLAGS >> 16); 535 ether3_ledon(dev); 536 537 if (!(ether3_inw(REG_STATUS) & STAT_TXON)) { 538 ether3_outw(ptr, REG_TRANSMITPTR); 539 ether3_outw(priv(dev)->regs.command | CMD_TXON, REG_COMMAND); 540 } 541 542 next_ptr = (priv(dev)->tx_head + 1) & 15; 543 local_irq_restore(flags); 544 545 dev_kfree_skb(skb); 546 547 if (priv(dev)->tx_tail == next_ptr) 548 netif_stop_queue(dev); 549 550 out: 551 return NETDEV_TX_OK; 552 } 553 554 static irqreturn_t 555 ether3_interrupt(int irq, void *dev_id) 556 { 557 struct net_device *dev = (struct net_device *)dev_id; 558 unsigned int status, handled = IRQ_NONE; 559 560 #if NET_DEBUG > 1 561 if(net_debug & DEBUG_INT) 562 printk("eth3irq: %d ", irq); 563 #endif 564 565 status = ether3_inw(REG_STATUS); 566 567 if (status & STAT_INTRX) { 568 ether3_outw(CMD_ACKINTRX | priv(dev)->regs.command, REG_COMMAND); 569 ether3_rx(dev, 12); 570 handled = IRQ_HANDLED; 571 } 572 573 if (status & STAT_INTTX) { 574 ether3_outw(CMD_ACKINTTX | priv(dev)->regs.command, REG_COMMAND); 575 ether3_tx(dev); 576 handled = IRQ_HANDLED; 577 } 578 579 #if NET_DEBUG > 1 580 if(net_debug & DEBUG_INT) 581 printk("done\n"); 582 #endif 583 return handled; 584 } 585 586 /* 587 * If we have a good packet(s), get it/them out of the buffers. 588 */ 589 static int ether3_rx(struct net_device *dev, unsigned int maxcnt) 590 { 591 unsigned int next_ptr = priv(dev)->rx_head, received = 0; 592 593 ether3_ledon(dev); 594 595 do { 596 unsigned int this_ptr, status; 597 unsigned char addrs[16]; 598 599 /* 600 * read the first 16 bytes from the buffer. 601 * This contains the status bytes etc and ethernet addresses, 602 * and we also check the source ethernet address to see if 603 * it originated from us. 604 */ 605 { 606 unsigned int temp_ptr; 607 ether3_setbuffer(dev, buffer_read, next_ptr); 608 temp_ptr = ether3_readword(dev); 609 status = ether3_readword(dev); 610 if ((status & (RXSTAT_DONE | RXHDR_CHAINCONTINUE | RXHDR_RECEIVE)) != 611 (RXSTAT_DONE | RXHDR_CHAINCONTINUE) || !temp_ptr) 612 break; 613 614 this_ptr = next_ptr + 4; 615 next_ptr = ntohs(temp_ptr); 616 } 617 ether3_setbuffer(dev, buffer_read, this_ptr); 618 ether3_readbuffer(dev, addrs+2, 12); 619 620 if (next_ptr < RX_START || next_ptr >= RX_END) { 621 int i; 622 printk("%s: bad next pointer @%04X: ", dev->name, priv(dev)->rx_head); 623 printk("%02X %02X %02X %02X ", next_ptr >> 8, next_ptr & 255, status & 255, status >> 8); 624 for (i = 2; i < 14; i++) 625 printk("%02X ", addrs[i]); 626 printk("\n"); 627 next_ptr = priv(dev)->rx_head; 628 break; 629 } 630 /* 631 * ignore our own packets... 632 */ 633 if (!(*(unsigned long *)&dev->dev_addr[0] ^ *(unsigned long *)&addrs[2+6]) && 634 !(*(unsigned short *)&dev->dev_addr[4] ^ *(unsigned short *)&addrs[2+10])) { 635 maxcnt ++; /* compensate for loopedback packet */ 636 ether3_outw(next_ptr >> 8, REG_RECVEND); 637 } else 638 if (!(status & (RXSTAT_OVERSIZE|RXSTAT_CRCERROR|RXSTAT_DRIBBLEERROR|RXSTAT_SHORTPACKET))) { 639 unsigned int length = next_ptr - this_ptr; 640 struct sk_buff *skb; 641 642 if (next_ptr <= this_ptr) 643 length += RX_END - RX_START; 644 645 skb = netdev_alloc_skb(dev, length + 2); 646 if (skb) { 647 unsigned char *buf; 648 649 skb_reserve(skb, 2); 650 buf = skb_put(skb, length); 651 ether3_readbuffer(dev, buf + 12, length - 12); 652 ether3_outw(next_ptr >> 8, REG_RECVEND); 653 *(unsigned short *)(buf + 0) = *(unsigned short *)(addrs + 2); 654 *(unsigned long *)(buf + 2) = *(unsigned long *)(addrs + 4); 655 *(unsigned long *)(buf + 6) = *(unsigned long *)(addrs + 8); 656 *(unsigned short *)(buf + 10) = *(unsigned short *)(addrs + 12); 657 skb->protocol = eth_type_trans(skb, dev); 658 netif_rx(skb); 659 received ++; 660 } else 661 goto dropping; 662 } else { 663 struct net_device_stats *stats = &dev->stats; 664 ether3_outw(next_ptr >> 8, REG_RECVEND); 665 if (status & RXSTAT_OVERSIZE) stats->rx_over_errors ++; 666 if (status & RXSTAT_CRCERROR) stats->rx_crc_errors ++; 667 if (status & RXSTAT_DRIBBLEERROR) stats->rx_fifo_errors ++; 668 if (status & RXSTAT_SHORTPACKET) stats->rx_length_errors ++; 669 stats->rx_errors++; 670 } 671 } 672 while (-- maxcnt); 673 674 done: 675 dev->stats.rx_packets += received; 676 priv(dev)->rx_head = next_ptr; 677 /* 678 * If rx went off line, then that means that the buffer may be full. We 679 * have dropped at least one packet. 680 */ 681 if (!(ether3_inw(REG_STATUS) & STAT_RXON)) { 682 dev->stats.rx_dropped++; 683 ether3_outw(next_ptr, REG_RECVPTR); 684 ether3_outw(priv(dev)->regs.command | CMD_RXON, REG_COMMAND); 685 } 686 687 return maxcnt; 688 689 dropping:{ 690 static unsigned long last_warned; 691 692 ether3_outw(next_ptr >> 8, REG_RECVEND); 693 /* 694 * Don't print this message too many times... 695 */ 696 if (time_after(jiffies, last_warned + 10 * HZ)) { 697 last_warned = jiffies; 698 printk("%s: memory squeeze, dropping packet.\n", dev->name); 699 } 700 dev->stats.rx_dropped++; 701 goto done; 702 } 703 } 704 705 /* 706 * Update stats for the transmitted packet(s) 707 */ 708 static void ether3_tx(struct net_device *dev) 709 { 710 unsigned int tx_tail = priv(dev)->tx_tail; 711 int max_work = 14; 712 713 do { 714 unsigned long status; 715 716 /* 717 * Read the packet header 718 */ 719 ether3_setbuffer(dev, buffer_read, tx_tail * 0x600); 720 status = ether3_readlong(dev); 721 722 /* 723 * Check to see if this packet has been transmitted 724 */ 725 if ((status & (TXSTAT_DONE | TXHDR_TRANSMIT)) != 726 (TXSTAT_DONE | TXHDR_TRANSMIT)) 727 break; 728 729 /* 730 * Update errors 731 */ 732 if (!(status & (TXSTAT_BABBLED | TXSTAT_16COLLISIONS))) 733 dev->stats.tx_packets++; 734 else { 735 dev->stats.tx_errors++; 736 if (status & TXSTAT_16COLLISIONS) 737 dev->stats.collisions += 16; 738 if (status & TXSTAT_BABBLED) 739 dev->stats.tx_fifo_errors++; 740 } 741 742 tx_tail = (tx_tail + 1) & 15; 743 } while (--max_work); 744 745 if (priv(dev)->tx_tail != tx_tail) { 746 priv(dev)->tx_tail = tx_tail; 747 netif_wake_queue(dev); 748 } 749 } 750 751 static void __devinit ether3_banner(void) 752 { 753 static unsigned version_printed = 0; 754 755 if (net_debug && version_printed++ == 0) 756 printk(KERN_INFO "%s", version); 757 } 758 759 static const struct net_device_ops ether3_netdev_ops = { 760 .ndo_open = ether3_open, 761 .ndo_stop = ether3_close, 762 .ndo_start_xmit = ether3_sendpacket, 763 .ndo_set_rx_mode = ether3_setmulticastlist, 764 .ndo_tx_timeout = ether3_timeout, 765 .ndo_validate_addr = eth_validate_addr, 766 .ndo_change_mtu = eth_change_mtu, 767 .ndo_set_mac_address = eth_mac_addr, 768 }; 769 770 static int __devinit 771 ether3_probe(struct expansion_card *ec, const struct ecard_id *id) 772 { 773 const struct ether3_data *data = id->data; 774 struct net_device *dev; 775 int bus_type, ret; 776 777 ether3_banner(); 778 779 ret = ecard_request_resources(ec); 780 if (ret) 781 goto out; 782 783 dev = alloc_etherdev(sizeof(struct dev_priv)); 784 if (!dev) { 785 ret = -ENOMEM; 786 goto release; 787 } 788 789 SET_NETDEV_DEV(dev, &ec->dev); 790 791 priv(dev)->base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0); 792 if (!priv(dev)->base) { 793 ret = -ENOMEM; 794 goto free; 795 } 796 797 ec->irqaddr = priv(dev)->base + data->base_offset; 798 ec->irqmask = 0xf0; 799 800 priv(dev)->seeq = priv(dev)->base + data->base_offset; 801 dev->irq = ec->irq; 802 803 ether3_addr(dev->dev_addr, ec); 804 805 init_timer(&priv(dev)->timer); 806 807 /* Reset card... 808 */ 809 ether3_outb(0x80, REG_CONFIG2 + 4); 810 bus_type = BUS_UNKNOWN; 811 udelay(4); 812 813 /* Test using Receive Pointer (16-bit register) to find out 814 * how the ether3 is connected to the bus... 815 */ 816 if (ether3_probe_bus_8(dev, 0x100) && 817 ether3_probe_bus_8(dev, 0x201)) 818 bus_type = BUS_8; 819 820 if (bus_type == BUS_UNKNOWN && 821 ether3_probe_bus_16(dev, 0x101) && 822 ether3_probe_bus_16(dev, 0x201)) 823 bus_type = BUS_16; 824 825 switch (bus_type) { 826 case BUS_UNKNOWN: 827 printk(KERN_ERR "%s: unable to identify bus width\n", dev->name); 828 ret = -ENODEV; 829 goto free; 830 831 case BUS_8: 832 printk(KERN_ERR "%s: %s found, but is an unsupported " 833 "8-bit card\n", dev->name, data->name); 834 ret = -ENODEV; 835 goto free; 836 837 default: 838 break; 839 } 840 841 if (ether3_init_2(dev)) { 842 ret = -ENODEV; 843 goto free; 844 } 845 846 dev->netdev_ops = ðer3_netdev_ops; 847 dev->watchdog_timeo = 5 * HZ / 100; 848 849 ret = register_netdev(dev); 850 if (ret) 851 goto free; 852 853 printk("%s: %s in slot %d, %pM\n", 854 dev->name, data->name, ec->slot_no, dev->dev_addr); 855 856 ecard_set_drvdata(ec, dev); 857 return 0; 858 859 free: 860 free_netdev(dev); 861 release: 862 ecard_release_resources(ec); 863 out: 864 return ret; 865 } 866 867 static void __devexit ether3_remove(struct expansion_card *ec) 868 { 869 struct net_device *dev = ecard_get_drvdata(ec); 870 871 ecard_set_drvdata(ec, NULL); 872 873 unregister_netdev(dev); 874 free_netdev(dev); 875 ecard_release_resources(ec); 876 } 877 878 static struct ether3_data ether3 = { 879 .name = "ether3", 880 .base_offset = 0, 881 }; 882 883 static struct ether3_data etherb = { 884 .name = "etherb", 885 .base_offset = 0x800, 886 }; 887 888 static const struct ecard_id ether3_ids[] = { 889 { MANU_ANT2, PROD_ANT_ETHER3, ðer3 }, 890 { MANU_ANT, PROD_ANT_ETHER3, ðer3 }, 891 { MANU_ANT, PROD_ANT_ETHERB, ðerb }, 892 { 0xffff, 0xffff } 893 }; 894 895 static struct ecard_driver ether3_driver = { 896 .probe = ether3_probe, 897 .remove = __devexit_p(ether3_remove), 898 .id_table = ether3_ids, 899 .drv = { 900 .name = "ether3", 901 }, 902 }; 903 904 static int __init ether3_init(void) 905 { 906 return ecard_register_driver(ðer3_driver); 907 } 908 909 static void __exit ether3_exit(void) 910 { 911 ecard_remove_driver(ðer3_driver); 912 } 913 914 module_init(ether3_init); 915 module_exit(ether3_exit); 916 917 MODULE_LICENSE("GPL"); 918